V INLINE WELDING INLINE WELDING
|
|
|
- Carol Garrett
- 5 years ago
- Views:
Transcription
1
2 SATF-40ND ø0,25'' - ø1,5'' ø6 - ø40 Technical Specifications - Water-cooled head - Dual-wing opening - Clamping jaws - stainless steel (1 kit per diameter) - Tungsten electrode specific to diameter - Motor with coder: allows for tungsten electrode start-up at all angles - High protection against start-up without tungsten electrode Weight: 8.8 kg Tool-free jaw fitting Remote control keypad Driven by AXXAIR power source ( cf compatibility table ) SATF-40ND SAFS-210 : Wire harness extension 10 M SMN40-XX Clamping jaws Ø in Adjustable spring- loaded system: to account for tube "out of round" References Accessories Consumables SCE16-XX : Ø 1,6 SCE24-XX : Ø 2,4
3 SATF-65ND ø0,25'' - ø2,5'' ø6 - ø65 Technical Specifications - Water-cooled head - Dual-wing opening - Clamping jaws - stainless steel (1 kit per diameter) - Tungsten electrode specific to diameter - Motor with coder: allows for tungsten electrode start-up at all angles - High protection against start-up without tungsten electrode Weight: 9.2 kg Tool-free jaw fitting Remote control keypad Driven by AXXAIR power source ( cf compatibility table ) SATF-65ND SAFS-210 : Wire harness extension 10 M SMN65-XX Clamping jaws Ø in Adjustable spring- loaded system: to account for tube "out of round" References Accessories Consumables SCE16-XX : Ø 1,6 SCE24-XX : Ø 2,4
4 SATF-115ND ø1'' - ø4,5'' ø25 - ø115 Technical Specifications - Water-cooled head - Dual-wing opening - Clamping jaws - stainless steel (1 kit per diameter) - Tungsten electrode specific to diameter - Motor with coder: allows for tungsten electrode start-up at all angles - High protection against start-up without tungsten electrode Weight: 9.9 kg Tool-free jaw fitting Remote control keypad Driven by AXXAIR power source ( cf compatibility table ) SATF-115ND SAFS-210 : Wire harness extension 10 M SMN115-XX Clamping jaws Ø in Adjustable spring- loaded system: to account for tube "out of round" References Accessories Consumables SCE16-XX : Ø 1,6 SCE24-XX : Ø 2,4
5 Accessories SKIF-01 SSED Accessories Consumables Options VAL-CO05 : Protection for shipping and storage for SAT models (except 220) SAFS-210 : Wire harness extension 10 M SKIB-01: gas protection kit - plugs Ø 6 to 41 SKIF-01: gas protection kit - membranes Ø 40 to 120 SMN40-xx SMN65-xx SMN115-xx SKIB-01 SMN40-XX Clamping jaws Ø in SMN65-XX Clamping jaws Ø in SMN115-XX Clamping jaws Ø in VAL-CO05 SSED-16: offset tungsten electrode support Ø 1.6 offset range 4 to 7.5 SSED-24: offset tungsten electrode support Ø 2.4 offset range 4 to 7.5
6 Dimensions A B C Ø min Ø max SATF-40ND ,8 kg < 70 db SATF-65ND ,2 kg < 70 db SATF-115ND ,9 kg < 70 db
7 SATO-80M ø0,4'' - ø3'' ø10 - ø80 Technical Specifications - Air-cooled head - Syetrical pull-latch fastener clamping - Motor with coder: allows for tungsten electrode start-up at all angles and a large range of diameters - Axial tungsten electrode adjustment Weight: 3 Kg (without harness) Torch angle adjustment: welding under flange or short T angle SATO- 80M Quick diameter adjustment: syetrical encircling clamping Driven by AXXAIR power source ( cf compatibility table ) References Accessories Consumables SKIB- 01: gas protection kit - plugs Ø6 to 41 SKIF- 01: gas protection kit - membranes Ø40 to 120 Mechanical profile guide: constant arc voltage SCE16-50 : Ø 1,6 SCE24-50 : Ø 2,4
8 SATO-115NDA ø0,625'' - ø4,5'' ø19 - ø115 Technical Specifications Water-cooled head A, 100% - Clamping jaws - stainless steel - Motor with coder: allows for tungsten electrode start-up at all angles and a wide range of diameters - Axial adjusting screw Weight: 7.5 kg Torch angle adjustment: welding under flange or short T angle References Quick diameter adjustment: Driven by AXXAIR power powerful syetrical source ( cf compatibility clamping table ) Accessories Mechanical profile guide: constant arc voltage Consumables SAFS- 210 : Wire harness extension 10 M Except with AVC/OSC/ WIRE SKIB- 01: gas protection kit - plugs Ø6 to 41 SATO- 115NDA SKIF- 01: gas protection kit - membranes Ø40 to 120 SADFP- 01: wire guide for open heads SCE16-50 : Ø 1,6 SCE24-50 : Ø 2,4 SKTO- 03 : Exchange kit for open head torch diam 1.6 and 2.4
9 SATO-170NDA ø1'' - ø6,625'' ø25 - ø170 Technical Specifications Water-cooled head A, 100% - Clamping jaws - stainless steel - Motor with coder: allows for tungsten electrode start-up at all angles and a wide range of diameters - Axial adjusting screw Weight: 9 kg Torch angle adjustment: welding under flange or short T angle References Quick diameter adjustment: Driven by AXXAIR power powerful syetrical source ( cf compatibility clamping table ) Accessories Mechanical profile guide: constant arc voltage Consumables SAFS- 210 : Wire harness extension 10 M Except with AVC/OSC/ WIRE SKIB- 01: gas protection kit - plugs Ø6 to 41 SATO- 170NDA SKIF- 01: gas protection kit - membranes Ø40 to 120 SADFP- 01: wire guide for open heads SCE16-50 : Ø 1,6 SCE24-50 : Ø 2,4 SKTO- 03 : Exchange kit for open head torch diam 1.6 and 2.4
10 SATO-220NDA ø1,5'' - ø8,625'' ø38 - ø220 Technical Specifications - Water-cooled head A, 100% - Clamping jaws - stainless steel - Motor with coder: allows for tungsten electrode start-up at all angles and a wide range of diameters - Axial adjusting screw Weight: 11 kg Torch angle adjustment: welding under flange or short T angle References Quick diameter adjustment: Driven by AXXAIR power powerful syetrical source ( cf compatibility clamping table ) Accessories Mechanical profile guide: constant arc voltage Consumables SAFS- 210 : Wire harness extension 10 M Except with AVC/OSC/ WIRE SKIB- 01: gas protection kit - plugs Ø6 to 41 SATO- 220NDA SKIF- 01: gas protection kit - membranes Ø40 to 120 SADFP- 01: wire guide for open heads SCE16-50 : Ø 1,6 SCE24-50 : Ø 2,4 SKTO- 03 : Exchange kit for open head torch diam 1.6 and 2.4
11 SATO-115NAOA ø0,625'' - ø4,5'' ø19 - ø115 Technical Specifications - Water cooled head - 200A, 100% - Thick tube multiple pass welding - Fitted with AVC/OSC module - Axes controlled by encoder - Oscillation range: 20 - AVC range: 20 - Three-dimensional adjustment for welding wire - Axial adjusting screw Weight : 8,8 kg Oscillation range: 20 AVC range: 20 V max : 15/s SATO- 115NAOA Quick diameter adjustment: syetrical encircling clamping Driven by AXXAIR power source ( cf compatibility table ) References Accessories Consumables SKIB- 01: gas protection kit - plugs Ø6 to 41 SKIF- 01: gas protection kit - membranes Ø40 to 120 SAOF module compatible with prefab machines SCE16-50 : Ø 1,6 SCE24-50 : Ø 2,4
12 SATO-170NAOA ø1'' - ø6,625'' ø25 - ø170 Technical Specifications - Water cooled head - 200A, 100% - Thick tube multiple pass welding - Fitted with AVC/OSC module - Axes controlled by encoder - Oscillation range: 20 - AVC range: 20 - Three-dimensional adjustment for welding wire - Axial adjusting screw Weight : 10 kg Oscillation range: 20 AVC range: 20 V max : 15/s SATO- 170NAOA Quick diameter adjustment: syetrical encircling clamping Driven by AXXAIR power source ( cf compatibility table ) References Accessories Consumables SKIB- 01: gas protection kit - plugs Ø6 to 41 SKIF- 01: gas protection kit - membranes Ø40 to 120 SAOF module compatible with prefab machines SCE16-50 : Ø 1,6 SCE24-50 : Ø 2,4
13 SATO-220NAOA ø1,5'' to ø8,625'' ø38 - ø220 Technical Specifications - Water cooled head - 200A, 100% - Thick tube multiple pass welding - Fitted with AVC/OSC module - Axes controlled by encoder - Oscillation range: 20 - AVC range: 20 - Three-dimensional adjustment for welding wire - Axial adjusting screw Weight : 13 kg Oscillation range: 20 AVC range: 20 V max : 15/s SATO- 220NAOA Quick diameter adjustment: syetrical encircling clamping Driven by AXXAIR power source ( cf compatibility table ) References Accessories Consumables SKIB- 01: gas protection kit - plugs Ø6 to 41 SKIF- 01: gas protection kit - membranes Ø40 to 120 SAOF module compatible with prefab machines SCE16-50 : Ø 1,6 SCE24-50 : Ø 2,4
14 Accessories SKIF-01 SADFP-01 Accessories VAL-CO06 : Protection for shipping and storage for NAOA and 220 models SADF2 SKIB-01: gas protection kit - plugs Ø 6 to 41 SKIF-01: gas protection kit - membranes Ø 40 to 120 SAFS-210 : Wire harness extension 10 M Except with AVC/OSC/ WIRE SKIB-01 Options SADF-2: wire feeder for SC and SATO (without wire spool) SADFP-01: wire guide for open heads VAL-CO06 SKTO-03 : Exchange kit for open head torch diam 1.6 and 2.4
15 Dimensions SATO - 80M A B C D A B E F 210 C Ø min 10 D SATO-115NDA SATO-170NDA SATO-220NDA Ø max 80 Ø min Mm 3 kg <70dB Ø max ,5 kg <70dB 9 kg <70dB 11 kg <70dB
16 Dimensions SATO - 115NAOA SATO - A B C Ø D max NAOA SATO- 220NAOA Ø min Ø max kg <70dB 10 kg <70dB 13 kg <70dB
INNOVATIVE ORBITAL SOLUTIONS INLINE WELDING
INLINE WELDING www.axxair.com SATF-40MI ø6 - ø40 mm ø0,25'' - ø1,5'' - Tungsten specific to diameter - Motor with coder: allows for tungsten - Compatible with AMI power sources with autocalibration ( 205,
Front Load Single Sensor
INFICON Front Load Single crystal sensors offer proven reliability and durability and have the best thermal stability of any sensor head on the market. The front load design allows for easy insertion of
Mechanical accessories
Bearing box Part no. 01209010, 01209029 Part no. 01209010 01209029 Shaft size Ø 15 mm Ø 10 mm Shaft load max Radial: 250 N, Axial: 150 N Speed max 4000 rpm Protection class IP 64 according to IEC 60529
Specific nozzle for Lase One torches.
CABLES & SPARE PARTS MICROWELDING TORCH Micro-welding torch for the Lase One generator. Available in two lengths: 1,5m and 3 m. Length 1,5 meters : L1-TM-15 Length 3 meters : L1-TM-30 MICROWELDING TORCH
Front Load Single Sensor
INFICON Front Load Single crystal sensors offer proven reliability and durability and have the best thermal stability of any sensor head on the market. The front load design allows for easy insertion of
TH240g+Ko TH240g+Ko Pneumatic vise grip TH240g+2Ko Pneumatic vise grip TH240g + Ko TH240g + 2Ko Ordering information
Pneumatic vise grip Single pneumatic cylinder Sample size: 0 18 mm (depending on jaws) Weight: 1.55 kg each grip (without jaws) TH240g+2Ko Pneumatic vise grip Dual pneumatic cylinder Sample size: 0 18
LINC TORCH TIG TORCHES RANGE QUALITY MAKES THE DIFFERENCE
LINC TORCH TIG TORCHES RANGE QUALITY MAKES THE DIFFERENCE 2 LINC TORCHES LTP/LT RANGE TABLE OF CONTENTS WHAT S NEW RANGE / FEATURES / APPLICATIONS ERGO & ERGO FLEX MODELS LEVER MODELS VALVE MODELS RANGE
TECHNICAL DATASHEET Incremental Encoder RI 58-F
Incremental hollow shaft encoder Up to 10 000 ppr Through hollow shaft and hubshaft up to 12 mm (14 mm optional) Optimized stator coupling Applications: Feedback for asynchronous motors, industrial applications
Front Load Dual Sensor
INFICON Front Load Dual crystal sensors offer proven reliability and durability and have the best thermal stability of any sensor head on the market. The dual sensor provides a backup crystal and is essential
Cool Drawer Single Sensor
The Cool Drawer Single Sensors allow crystal installation into the sensor from the side, convenient for systems with insufficient room for front load crystal installation. The Cool Drawer Single Sensor
ENC-IQ58S-H-PROG-ZCW-4-06-A-L1
IQ58/ IQ58S/ CKQ58 Hollow Shaft Magnetic Encoder Series FEATURES Programmable Incremental Encoder Resolution from 1 to 16384 PPR Selectable Index length 90 or 180 el. Push-Pull and Line Driver Compatible
To be used for reference only Property of Arc Machines, Inc.
MODEL 9-1500 IPB Notice and Revision History This document and the information contained herein is the property of Arc Machines, Inc. It is proprietary and submitted and received in confidence. It shall
Cool Drawer Dual Sensor
The Cool Drawer Dual Sensor is designed for use in critical processes where it is desirable to have a second crystal in the vacuum chamber. Water cooled, cast stainless steel sensor body, two Cool Drawer
ENC-CKP58-H-PROG-ZCW-4-06-A-L1
IP58/IP58S/CKP58 Programmable Incremental Encoders FEATURES Programmable Incremental Encoder Resolution from 1 to 65536 PPR Voltage 5 VDC or 10-30 VDC Push-Pull and Line Driver Compatible Output IP 65
Temperature Measurement SITRANS TS300
Siemens AG 018 For food, pharmaceuticals and biotechnology modular design Dimensional drawings Cable gland M1x1.5 for cable Ø 3... 6.5 (0.1... 0.6) Ø 60 (.36) Ø d = N + H 1 Ø 50.5 (1.99) U X H 1 N H Ø
Orbital Welding Power Supplies
ORBIMAT CBasic - compact orbital welding power supplies! 11 Orbital welding power supplies ORBIMAT CB Multilingual menu navigation via color display Orbital welding power supplies of the ORBIMAT CBasic
Cutting devices, longitudinal 5
Cutting devices, longitudinal 5 SM-120 Multisystem Belt/tape width max. mm 120 inch 4.7 Cutting width per operation mm 120 inch 4.7 Belt/tape thickness max. mm 5 inch 0.2 Electric power supply V 3 230/400
SIZES FROM 1, ,000 Nm BACKLASH FREE, TORSIONALLY STIFF METALLIC BELLOWS COUPLINGS
BX ZA SIZES FROM 1,500-100,000 Nm BAKLASH FREE, TORSIONALLY STIFF METALLI BELLOWS OUPLINGS BELLOWS OUPLINGS BX ZA Optional: GENERAL INFORMATION ABOUT R+W BELLOWS OUPLINGS: SERVIE LIFE R+W bellows couplings
514 TUBEMASTER. Features. Options PROGRAMMABLE POWER SOURCE FOR ORBITAL WELD HEADS
TUBEMASTER 514 514 TUBEMASTER PROGRAMMABLE POWER SOURCE FOR ORBITAL WELD HEADS The model 514 brings the benefits of true digital technology to the orbital welding customer: unparalleled accuracy, repeatability,
Accessories for control enclosures. BERNSTEIN attachment solutions. Double coupling head (console version with suspension system attachment)
25 Accessories for control enclosures BERNSTEIN attachment Single coupling head (suspended console version) Double coupling head (console version with suspension system attachment) 322.5 231 232 140 The
CATALOGUE OW // EN // Code // Rev ORBITAL WELDING. Orbital welding systems and accessories for high-purity process piping
CATALOGUE OW // EN // Code 890 700 012 // Rev. 0316 ORBITAL WELDING Orbital welding systems and accessories for high-purity process piping www.orbitalum.com Orbital welding systems and accessories for
Railtrac A unique, flexible, multi-purpose system for welding and cutting. G lobal solutions for local customers everywhere
1000 A unique, flexible, multi-purpose system for welding and cutting. G lobal solutions for local customers everywhere 1 SAB Flexible answer to stiff requirements is a system of components that can be
Product Information ECI 1118 EQI 1130 ECI 1119 EQI Absolute Rotary Encoders without Integral Bearing
Product Information ECI EQI 0 ECI 9 EQI Absolute Rotary Encoders without Integral Bearing 0 ECIEQI 00 Absolute rotary encoders Synchro flange 0F) for axial mounting Blind hollow shaft A) Without integral
TECHNICAL DATASHEET Absolute Encoder AC 58 - SUCOnet
Compact design SUCOnet or Hengstler-G1-Protocol Parameterizable: preset, direction, scaling factor, resolution PC communication via RS 485 with Hengstler-G1-Protocol Clamping flange TECHNICAL DATA mechanical
Assembly and Maintenance
Assembly and Maintenance Assembly and Maintenance Test Pumps Pressure Test Pumps Tests all types of installations such as heating, compressed air and refrigeration systems, oil installations, fire lines
ORBITAL WELDING. Orbital welding systems and accessories for high-purity process piping. A brand of ITW Orbital Cutting & Welding
CATALOGUE OW // EN // Code 890 700 012 // Rev. 0617 ORBITAL WELDING A brand of ITW Orbital Cutting & Welding www.orbitalum.com New products TX 38P Tube-to-tube-sheet orbital weld head The new ORBITALUM
MInIMAT-Ec. flexible data recording highly accurate
Screwdriving technology Automation Air motors Air tools Handheld Screwdriver electric MInIMAT-Ec straight handle design - torque ranges between 0.03-18 nm pistol-grip design - torque ranges between 0.06-18
WELDING CONSOLE KVS L
WELDING CONSOLE KVS L KVS-L 1x1 KVS-L 2x2 KVS-L 3,5x2 A (mm) AS REQUEST AS REQUEST AS REQUEST B (mm) 1000 2000 3500 C (mm) 1000 2000 2000 DIFFERENT WELDING PROCCESS TIG, MIG,MAG SAW TIG, MIG,MAG SAW TIG,
NIR Moisture Analyzer KB-30
NIR Moisture Analyzer KB-30 Operation Manual Safety Precautions FPL950701 Improper use of the NIR moisture analyzer in violation of the following safety notes may result in death, injury or damage to property
MechControl 2, MechControl 4. Spare parts list. Edition Valid for serial no xxx -xxx,
MechControl 2, MechControl 4 Spare parts list Valid for serial no. 652 -xxx -xxx, Ordering no. Product 0444 500 880 Aristot MechControl 2, WO100 0444 500 881 Aristot MechControl 4, WO100 Spare parts are
CLAMPING SYSTEM MACRO
Тольятти: (8482) 25-82-40, (8482) 25-82-85, (927) 775-49-65, (906) 128-12-68, tlt@ionexedm.ru Москва: (499) 782-61-17, (916) 627-56-24, (926) 300-12-42, msk@ionexedm.ru Томск: (3822) 23-16-80, (909) 543-16-80,
CF-38, CF-80 and CF-100 Gallon Models
COMMERCIAL OIL FIRED REPLACEMENT PARTS LIST CF-38, CF-80 and CF-100 Gallon Models Includes Hydrojet Total Performance System Effective: April, 2007 ECO 7181 NOTE: BOTH MODEL AND SERIAL NUMBERS ARE REQUIRED
Round Louvers. Adapters for , 45, 47 & 86. XV.3. Air Distribution
Air Hose 23-0102 2 Low friction, non collapsible, sold in length of 47 (1200 mm) 23-0104 2.5 Low friction, non collapsible, sold in length of 47 (1200 mm) 23-0015 23-0020 23-0025 23-0035 23-0040 2 Collapsible
Cable Plugs and Sockets EN
364 accessories Cable Plugs and Sockets EN60974-12 Murex Type CC17 Plug Stock Code Cable Size Length Max Amps 651001 70mm 2 175mm 400A Murex Type CC18 Socket Stock Code Cable Size Length Max Amps 651002
RENCO. Rotary Encoders. R35i RCML15
RENCO Rotary Encoders R35i RCML15 January 2016 RENCO R35i and RCML15 Rotary Encoders The RENCO R35i is an incremental rotary encoder without integral bearing and with optical scanning. Its special properties
Application. Types Available. Duct sensor for air quality, temperature and humidity (optional) Datasheet
LK+ CO2+VOC Duct sensor for air quality, temperature and humidity (optional) Datasheet Subject to technical alteration Issue date: 04.04.2018 A002 Application Duct air quality sensor for detection of CO2,
Sense it! Connect it! Bus it! Solve it! ENCODERS
Sense it! Connect it! Bus it! Solve it! ENCODERS Incremental encoders Incremental encoders use electrical pulses to measure rotation speed or position. The dual-channel incremental encoders of the Ri series,
07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
Cordless Drill Driver A 18 M bl MaxiMAX in the MAFELL-MAX
Cordless Drill Driver A 18 M bl MaxiMAX in the MAFELL-MAX ref.no.: 91A040 EAN: 4032689193274 Transport and storage box MAFELL-MAX Technical data Collar diameter 43 mm Chuck capacity 13 mm Max. drilling
Actuator FD61. Product Data Sheet Feature. Option
Product Data Sheet www.moteck.com FD61 FD61 is a quiet and powerful actuator designed for use in furniture application. Compared to FD6, the motor size of FD61 is more compact. There are several models
IS-DM220/IR/HB IS-DM220
IS-DM220/IR/HB IS-DM220 Installation Guide Indoor/Outdoor Ver. 1.2 00P6NX223ZXSEA2 Table of Contents 1. Indoor Camera Installation... 3 1.1 Hard Ceiling... 3 1.2 In-Ceiling (T-Bar) Mounting... 13 1.3 4S
KINAX WT720 absolute, programmable angular postion transmitter
For industrial applications in rough environments KINAX WT720 is a robust, absolute angular position transmitter, which is particularly suited to applications in rough environments due to its unique capacitive
07. har-link INTERFACE CONNECTORS
. INTERFACE CONNECTORS The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
Rotary Measuring Technology Absolute encoders, Multiturn, DeviceNet
High IP High shaft load capacity Shock/vibration resistant Short-circuit proof Reverse polarity protection Compact and Rugged: Minimal installation depth High shock and vibration values Very compact (only
Tig 3001i. Spare parts list. Edition Valid for serial no. 840-xxx-xxxx,950-xxx-xxxx,039-xxx-xxxx
Spare parts list Edition 20110720 Valid for serial no. 840-xxx-xxxx,950-xxx-xxxx,039-xxx-xxxx Ordering no. Product 0459 745 883 Origo Tig 3001i TA23 0459 745 884 Origo Tig 3001iw TA23 0459 745 885 Origo
SERIE 59. Rear clamp. Frontal clamp HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS
HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Hollow shaft from Ø 10 to 14 mm Protection class IP67 according
MINIMAT-EC. Handheld Screwdriver electric
Screwdriving Technology Automation Air Motors Air Tools MINIMAT-EC straight handle design - torque ranges between 0.01-25 N m pistol-grip design - torque ranges between 0.06-18 N m angle head design -
Linear Luminaire with LED Series 6012/5
> For use in Zones 1 & 2, 21 & 22 > Latest LED technology with a high luminous efficacy and a long service life > Extra flat version for low mounting depth > Powder-coated sheet-steel or brushed stainless
MIG-A TWIST MIG/MAG WELDING HOSES
MIG-A TWIST MIG/MAG WELDING HOSES MIG-A Twist - new patented welding hose with unprecedented ergonomics and flexibility MIG-A Twist - the new generation of welding hoses The design of MIG-A Twist fits
Water Module Products Ordering Guide
Water Products Ordering Guide Revision Z24, May 2018 Contents 100W/100W+ Datalogging Water ERT... 3 100W Integral Connector Encoder... 3 100W+ Integral Connector Encoder... 3 100WP/100WP+ Datalogging Water
Cable entry plate KDP Plastic, rectangular
Cable entry plate KDP Plastic, rectangular 87 Cable entry plate KDP Plastic, rectangular Advantages Straight in! 22 cables installed in approx. 2 minutes! 10 times faster and with a simultaneous space
MIRROR POLISHED POSTS See page 46
PRE-ASSEMBLED POSTS We now offer the largest range of pre-assembled posts from stock. Straight out of the box and ready to bolt down or side fix. See the following pages to find the most suitable design.
Accessories. Page 1/
Table of contents Page Programming software Ezturn 302 SSI-Display Type 570 303 Multifunction display Type 571 304 Fixing components for encoders Flange adapters, square, round, angle 305 Fastening eccentrics
Tools for Pipe Welding
E L D Tools for Pipe elding ELD-TECH ApS E L D T Clamp L i f e t i m e warranty on broken parts Due to its unique design, T Clamp ensures that the clamping forces are evenly spread round the pipe to be
MInIMAT-ec. flexible data recording highly accurate
Screwdriving technology Automation Air motors Air tools Handheld Screwdriver electric MInIMAT-ec straight handle design - torque ranges between 0.03-18 nm pistol-grip design - torque ranges between 0.06-18
A7 MIG Welder 450, Engineered for your profit. A7 MIG Welder 450 ENGINEERED FOR YOUR PROFIT. Kemppi K7 Welding equipment
A7 MIG Welder 450 ENGINEERED FOR YOUR PROFIT Kemppi K7 Welding equipment 1(9) THE NEW STANDARD IN ROBOTIC MIG WELDING A7 MIG Welder 450 is the state-of-the-art solution for robotic arc welding, ideal for
Mini vertical unit. Combs
E4100 Mini SDS PAGE, Native PAGE, Gradient, Second dimension and Nucleic acid separations Mini vertical unit = The preferred unit for routine mini protein electrophoresis, the mini vertical unit is constructed
FTTX Fiber Optic Cabinet Packages Priority Electronics USA
Priority Electronics USA Priority Electronics Ltd Application Hoffman FTTX enclosures are designed to protect and manage fiber optic cable for broadband delivery in outdoor applications. Constructed with
MINIMAT-EC-Servo Screwdriver Spindles
Screwdriving technology Automation Air motors Air tools Screwdriver Spindles electric MINIMAT-EC-Servo Screwdriver Spindles Maximum flexibility and processing reliability Straight design torque ranges
Series description: Wilo-MultiCargo HMC
Series description: -MultiCargo HMC H/m HMC 5 HMC -MultiCargo HMC 3../.. 1 3 5 7 /m³/h Design Self-priming water-supply unit Application Water supply Sprinkling Irrigation and spraying Pumping water from
Ø 58 mm, depth 48 mm Shaft dimension. Hollow Ø 15 mm, solid Ø 6 or 10 mm Shaft loading (axial and radial)
ABSOLUTE ENCODERS AMT58 SSI Multi-turn Line Standard dimension Ø58mm Hollow or solid shaft Very high resolution Very high accuracy APPLICATIONS -Motion control -Automated machinery -Length measurement
Plasma cutting. ATPL series Plasma Cutting Machines For Impressive Performances
Plasma cutting ATPL series Plasma Cutting s WWW.HACO.COM For Impressive Performances 1 CNC PLASMA CUTTING MACHINE A WELL-ENGINEERED MACHINE The ATPL features an over dimensioned table frame which is constituted
Fully digital solution for automation of welding processes. Robot integration
Fully digital solution for automation of welding processes Robot integration Integrator solution for au MIG, TIG and PLASMA weldin Being one of Europe s leading developers and manufacturers of welding
Fixings for Mobile Radio Base Stations
Fixings for Mobile Radio Base Stations Clamps Cleats Accessories Fixings for Mobile Radio Base Stations The Telegärtner Group is now pleased to include cable clamps and cleats to extend its portfolio of
GEEETECH. Me Creator2 printers contain heated moving parts. Never reach inside the printer while it is in operation or before it has cooled down.
ME CREATOR 2 SAFETY INSTRUCTION Do read all the instructions and cautionary markings in this manual before operating your Me Creator. Me Creator2 printers contain heated moving parts. Never reach inside
STAINLESS STEEL TROLLEYS
STAINLESS STEEL TROLLEYS Single-sided and double-sided trolleys. Made of 18/10 stainless steel, fully welded. Suitable for transporting and storing baskets and accessories in general. Composed by a square
Linear Luminaire with LED Series 6412/5
> For use in Zones 2, 21 & 22 > Latest LED technology with a high luminous efficacy and a long service life > Extra flat version for low mounting depth > Powder-coated sheet-steel or brushed stainless
Metfab - 7 Ricdanic Drive, BAYSWATER,Vic,3153 Ph:
Mild Steel Flat Mild Steel Flat 10x3 4m Rydal 65x5 6m Flat 13x3 4m Rydal 65x6 6m Flat 13x5 4m Rydal 65x8 6m Flat 16x3 4m Rydal 65x10 6m Flat 16x5 4m Rydal 65x12 6m Flat 16x8 6m Flat 75x5 6m Flat 20x3 6m
ARS - ARC ROTARY ENCODERS. Series. Incremental INDUSTRIAL ROTARY ENCODERS UP TO PULSE VARIOS RESOLUTIONS VARIOUS SOLID SHAFT AND BODY DIAMETERS
ARS - ARC Series Incremental ROTARY ENCODERS INDUSTRIAL ROTARY ENCODERS UP TO 20.000 PULSE VARIOS RESOLUTIONS VARIOUS SOLID SHAFT AND BODY DIAMETERS CUSTOM DESIGNS Shaft Models Hollow Shaft Models Tel:
BLITZ 60L - BLITZ 55 - BLITZ 50. Double head sawing machine with motorized movement of the mobile head and electronic control of the head tilting
BLITZ 60L - BLITZ 55 - BLITZ 50 Double head sawing machine with motorized movement of the mobile head and electronic control of the head tilting 12/08/2015 - Page 1 of 12 Technical specifications: First
Form Measurement ROUNDTEST RA-1600
Form Measurement ROUNDTEST RA-1600 A new PC-compliant Roundness and Cylindricity form measuring instrument with extensive analysis features to enable measurement of a wide variety of workpieces. Powerful
Pronto Air Personal Transporter
Parts Catalog Issued: Sep 20, 2018 Pronto Air Personal Transporter with MyBody Seating Parts Catalog Usage Guide The information contained in this document is subject to change without notice. This catalog
Integrated System for PAGE and Blotting
Mini-V 8 10 Integrated System for PAGE and Blotting Mini-V 8 10 Gel Electrophoresis System Gel size 8.7 cm x 7.2 cm (W x L) Patented drop-in wedge automatically positions gels without the use of gaskets
Stainless Steel Hatch Fasteners Page
Izerwaren numbers Stainless Steel Hatch Fasteners Page -4-3-0-0 hatch fasteners, flush type with separate key sea water resistant - leak proof finish: rolled Installation: Drill hole: 22.5 mm Ø / 7/8 Back
Workholding. Workholding CHUCKS CENTRES 3-JAW SELF CENTERING MONO-BLOCK JAW CHUCKS STEEL CENTRES 60º PLAINBACK FITTING CARBIDE CENTRES 60º
CENTRES CHUCKS STEEL CENTRES 60º 3-JAW SELF CENTERING MONO-BLOCK JAW CHUCKS CARBIDE CENTRES 60º Taper Stock Code MT1 014-101 0.25kg MT2 014-102 0.25kg MT3 014-103 0.5kg MT4 014-104 1kg MT5 014-105 2.5kg
IV Pole/Stand Provita Smart IV Stand Telescoping One-Hand Operation
IV Pole/Stand Provita Smart IV Stand Telescoping One-Hand Operation 1-hand telescoping safety operation Height Range: 1300-2100mm Stable five star weighted base 4-hook or 2-hook IV holder Colour coordinated
v1.0 JL10 Series Circular Waterproof Connector Connector Training Module Copyright 2015 JAE Electronics, Inc.
v1.0 JL10 Series Circular Waterproof Connector Connector Training Module Copyright 2015 JAE Electronics, Inc. JAE JL10 Series Circular Waterproof Connector Application Examples Industrial machineries Servo
Incremental encoders to control frequency converters
Incremental encoders to control frequency converters All encoders are delivered with a 10m supply cable and suitable plug (if necessary)! 46 z deep Incremental encoders for frequency controls of the following
3kW Microwave Generator, 2.45 GHz. Model GA4313A Model GA4323A Model GA4329A GERLING
Models GA4313A GA4323A and GA4329A are complete 3kW microwave generator systems designed for use in laboratory research and process development applications. Consisting of separate rack mountable power
Digital electropneumatic Positioner for the integrated mounting on process control valves
Digital electropneumatic Positioner for the integrated mounting on process control valves Type 8692 can be combined with Compact stainless steel design Graphic display with backlight Easy start-up Comprehensive
Arc Machines M217 WDR
Arc Machines M217 WDR A First Look at AMI s New Orbital Welding Power Supply Arc Machines (AMI) in Pacoima, Ca. has long been a market leader in the field of orbital welding. Beginning with the Model 107
SAFETY re-defined. Backwater Protection. The new Staufix FKA/SWA and Pumpfix F series Top-level backwater protection. Quality Safety Success
SAFETY re-defined Backwater Protection The new Staufix FKA/SWA and Pumpfix F series Top-level backwater protection Quality Safety Success Backwater protection: KE System innovations Body with only mm gradient
Incremental Encoder with Hollow Shaft
Incremental Encoder Type RI 36-H n miniature industry encoder for high number of pulses n short mounting length n easy mounting procedure n Application e.g.: - Motors - Machine tools - Packaging Machines
4-Other arc welding 4-1
-Other arc welding OTHER ARC WELDING Cables and connectors............................... -2 to -3 Clamps................................................................... - to -5 Magnetic ground clamps.............................
ALPHA SIMBOX Small Distribution Boards
ALPHA SIMBOX Small Distribution Boards /2 Introduction /3 Introduction /4 Flush-mounting and hollow-wall distribution boards /5 Surface-mounting and hood-type distribution boards /6 Accessories /7 Dimensional
Power. > 02/2011 Catalogue. beveling. facing. welding. l complete solutions. one source. Machines and tools for tube and pipe preparation.
Power. Machines and tools for tube and pipe preparation. > 02/2011 Catalogue EN orbital cutting. beveling. facing. welding. l complete solutions. one source. precision. power. simplicity. Neuheiten. New
Valve terminal RE-10 with Multi-pin, AS-Interface or bus connection 4 12 valve stations, 300 Nl/min (0.305 Cv)
Type of connection = AS = B1 = B6 Order code RE-10/08-M-1-060 Series Number of stations Multi-pin: 4, 6, 8, 10, 12 Bus versions: 4, 8, 12 Electrical options M-1 = Multi-pin D-Sub plug AS3 = AS-Interface
1551 S. Harris Court,. Anaheim, CA Phone: Fax:
1551 S. Harris Court,. Anaheim, CA 92806 Phone: 714.978.1551... Fax: 714.978.0431 Model 4KE / 4KEH Series: Semi-Automatic, Motorized Y/Z Axes, Wedge-Wedge, Ball- Wedge Triple-Convertible Wire Bonders Last
MIG/MAG WELDING TORCHES & CONSUMABLES
MIG/MAG WELDING TORCHES & CONSUMABLES TAURUS BZ15 MIG TORCH 4 5 TECHNICAL DATA Cooling Gas Cooled 6 7 Duty cycle 60% 180 Amp CO 2, 150 Amp MIX Wire Size v 0.6-1.0 mm 13 8 12 11 10 9 POSITION CODE REFERENCE
HY-TB5 CNC Series Manual five axis
HY-TB5 CNC Series Manual ------ five axis Thank you for choosing our products better and faster for you to use NC products, please read this manual, make sure the pump is started before the water-cooled
PlasmaTIG Weld Package
PlasmaTIG Weld Package Torch system with TIG dressing Contact-free ignition without high frequency Solutions for: ABB // FANUC // KUKA // MOTOMAN Solutions PlasmaTIG for: Weld Package: DCT power source
Modular system for ACO Bath gullies Easyflow
Modular system for ACO page 54 f. Designer gratings Designer gratings Tileable surface Glass covers Page 67 Top section circular + detached thin bed flange Top section square + detached thin bed flange
UPGRADE PROGRAM. V250 Series Pumps vs V301 Series Pumps. Technical Memo
UPGRADE PROGRAM V250 Series Pumps vs V301 Series Pumps Technical Memo INDEX Outline drawings ISO100 3 Outline Drawing CFF6 5 Technical Specification 7 Notes 8 Accessories 8 Controller comparison 9 Outline
Sputtering Sensor ADVANTAGES
The INFICON is specifically designed for use in any sputtering process. The sensor body and cooling tubes are gold plated beryllium copper for maximum cooling efficiency in the sputtering environment.
Rotary Measuring Technology
Multiturn Type 8 Profibus-DP Very compact (only 87.8 mm installation depth); Ideal for dynamic applications thanks to its non-contact multiturn stage Solid shaft or blind hollow shaft Long service life
THERMASGARD TM 65. Immersion screw-in duct temperature measuring transducer, calibratable, with multi-range switching and active output TECHNICAL DATA
Patented quality product (Immersion sensor patent no. DE 10 2012 017 500.0) Calibratable temperature measuring transducer THERMASGARD with eight switchable measuring ranges, continuous linear output, enclosure
Level Transmitter. Table of dimensions see page 4. Total length B Installation length A SW55 Ø 55 Ø 75
Level Transmitter Construction The GEMÜ level transmitter has an immersion tube with reed contacts and a chain of resistors which are triggered by a float with an integrated permanent magnet. A threaded
07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
SYSTEM 25 SYSTEM 50 AS SYSTEM 63 SYSTEM 75 SYSTEM 100. Alsident System 50. Antistatic (AS) Product Information
Alsident System 50 Antistatic (AS) Product Information . System 50 Antistatic General Information Product Specification Product description System 50 Antistatic Alsident System Airflow between 45-85 m
Absolute Encoders Multiturn
The multiturn encoders 6 and 8, with interface and combined optical and magnetic sensor technology, offer a maximum resolution of 5 bits. These encoders are programmable via the Ezturn software. The hollow