PART 4 Test Item File
|
|
- Victoria McCoy
- 6 years ago
- Views:
Transcription
1 PART 4 Test Item File
2 Principles of Electric Circuits, 8e (Floyd) Chapter 1: Quantities and Units 1) The unit of measurement for conductance is the coulomb. (True/False) 2) Kilo equals 1,000 times the base unit. (True/False) 3) Inductors store energy in an electrostatic field. (True/False) 4) An electronic device which stores an electric charge is known as an inductor. (True/False) 5) The symbol μ is an abbreviation for 10-6 or micro. (True/False) 6) Which of the following are common applications of electronics? A) Computers B) Communications systems C) Automation D) Consumer products E) All of the above 7) The symbol for current is: A) C B) I C) A D) V 8) The unit of measurement for current is the: A) Volt B) Ampere C) Watt D) Ohm 9) The symbol for voltage is: A) C B) R C) A D) V 10) The unit of measurement for voltage is the: A) Volt B) Ampere C) Watt D) Ohm 11) The symbol for a resistor is: A) C B) R C) A D) V 262
3 12) The shortcut symbol for ohms is: A) α B) Ω C) δ D). 13) The unit of measurement for resistance is the: A) Volt B) Ampere C) Watt D) Ohm 14) Which of the following is NOT a typical electrical component? A) Resistor B) Capacitor C) Megatron D) Inductor E) Transformer 15) An ohmmeter is used for measuring: A) current B) resistance C) voltage D) power 16) Which of the following metric prefixes is NOT commonly used in electronics work? A) kilo B) milli C) tera D) micro E) pico 17) Express the number 10,000 in proper scientific notation. A) B) C) D) ) Convert 4.7 ma to amperes. A) A B) A C) 4,700 A D) 47,000 A 19) Convert 120 mw to W. A) 120,000 W B) 1,200 W C) W D) 0.12 W 263
4 20) Convert 10,000 ohms to kω. A) 1 kω B) 10 kω C) 100 kω D) 1000 kω 21) Convert 75 μv to mv. A) 7500 mv B) 75,000 mv C) mv D) mv 22) Convert 5.7 mw to μw. A) μw B) μw C) 57,000 μw D) 5,700 μw 23) Convert W to the closest standard metric prefix. A) 68 μw B) 0.68 μw C) 680 μw D) 6.8 μw 24) Convert A to the closest standard metric prefix. A) 3.95 ma B) 39.5 ma C) ma D) 395 ma Convert the following: 25) Amp = A) 2 microamps B) 2 amps C) 2 milliamps D) 0.5 milliamps 26) 4.7 kω = A) Ω B) Ω C) Ω D) Ω 27) 3.9 kω = A) Ω B) Ω C) Ω D) Ω 264
5 28) 980 microvolts = A) 9.80 millivolts B) V C) V D) both A and C E) none of the above 29) 2.2 kv = A) 2,200 Volts B) V C) V D) V 30) Siemens is a unit for: A) resistance B) conductance C) power D) voltage 31) The is a device that magnetically couples ac voltages from one point in a circuit to another. A) dc power supply B) capacitor C) transformer D) inductor 32) A resistor is a device that. A) opposes the flow of electrons B) stores power C) is a type of semiconductor D) stores electrostatic charge 33) The shorthand method that uses a base number between 1 and 10 is called: A) decimal B) scientific notation C) prefix D) engineering notation 34) The symbol for power is: A) Z B) W C) Q D) P 35) An oscilloscope is used primarily for measuring. A) current B) ac voltage C) power D) conductance 265
6 36) Express =,. A) , 4.73 milli B) , 4.73 micro C) , 4.73 milli D) M ,.473 milli 37) Express in milli, basic units, and micro. A) 5.6 milli, 0.056, micro B) 56 milli, 0.056, micro C) 560 milli, 5.600, 5600 micro D) 5600 milli, 56, 560 pico 38) Multiply ( )(48 101) =,. A) , 47.6 micro B) , 47.6 milli C) , 47.6 milli D) , 47.6 nano 39) Add ( ) + ( ) =,. A) , 1.4 Giga B) , 1.4 Giga C) , 1.4 Giga D) , 1.4 Mega 40) Subtract ( ) - ( ) =,. A) , 3.24 milli B) , 3.24 kilo C) , 3.24 kilo D) , 3.24 kilo 41) Divide = A) , 283 micro B) , 283 micro C) , 283 micro D) , 283 micro 42) Convert 4,600,000 Ω to Mega Ω. A) 4.6 Mega Ω B) 460 Mega Ω C) 4600 Mega Ω D) 46 Mega Ω 266
7 43) 2 μf = A) 2000 nf B) 200 pf C) F D) both A and C 44) Express the number 51,000,000,000 in proper scientific notation. A) B) C) D) ) The SI system is A) based on a system of fundamental units B) used for engineering work C) used for scientific work D) an international system E) all of the above 267
8 1) FALSE 2) TRUE 3) FALSE 4) FALSE 5) TRUE 6) E 7) B 8) B 9) D 10) A 11) B 12) B 13) D 14) C 15) B 16) C 17) C 18) B 19) D 20) B 21) C 22) D 24) C 25) C 26) B 27) C 28) E 29) A 30) B 31) C 32) A 33) B 34) D 35) B 36) A 37) B 38) C 39) A 40) B 41) C 42) A 43) D 44) A 45) E 23) A 268
9 Principles of Electric Circuits, 8e (Floyd) Chapter 2: Voltage, Current, and Resistance 1) The smallest particle of an element that still retains the characteristics of the element is called an atom. (True/False) 2) Electrons are negatively charged particles, and are contained in the nucleus of the atom. (True/False) 3) In the neutral state all atoms contain the same number of protons and electrons. (True/False) 4) The outermost shell of an atom is called the valence shell. (True/False) 5) The copper atom contains 29 free electrons. (True/False) 6) The nucleus contains protons and electrons, each with an opposite charge. (True/False) 7) The process of gaining a valence electron is known as ionization. (True/False) 8) Valence electrons are tightly bound in insulators. (True/False) 9) Current value depends on the amount of charge moving past a point in a unit of time. (True/False) 10) The movement of electrons between two points is called voltage. (True/False) 11) The best conductor in the following list is: A) Silver B) Copper C) Silicon D) Germanium 12) The materials with the fewest free electrons are classified as: A) conductors B) semiconductors C) insulators D) silly putty 13) The unit of electrical charge is measured in: A) amperes B) free electrons C) positive or negative charges D) Coulombs 14) How is a negative ion produced? A) the atom loses an electron from the valence shell B) the atom gains a proton in the nucleus C) the atom gains an electron in the nucleus D) the atom gains an electron in the valence shell 269
10 15) A voltage source contains which of the following? A) potential energy B) potential difference C) electromotive force D) all of the above 16) Which of the following is NOT a voltage source? A) battery B) semiconductor C) solar cell D) generator 17) The rate of flow of free electrons in a conductive material is called: A) ampere B) current C) voltage D) coulomb 18) Five coulombs of charge flow past a point in 0.5 seconds. How many amperes of current are flowing? A) 5 A B) 10 A C) 15 A D) 20 A 19) The opposition to current is called: A) resistance B) conductance C) insulators D) ohms 20) The typical resistor to use for higher power applications would be the: A) carbon-composition B) carbon film C) metal oxide D) metal film E) wire wound 21) A resistor coded with Red-Violet-Black-Gold bands respectively, would be of what value and tolerance? A) 270 Ω +/- 5% B) 27 Ω +/- 5% C) 2.7 Ω +/- 5% D) 0.27 Ω +/- 5% 22) A potentiometer is a: A) variable resistor B) voltage-control device C) 3-terminal device D) all of the above 270
Sample assessment task. Task details. Content description. Task preparation. Year level 9 Learning area Subject Title of task
Sample assessment task Year level 9 Learning area Subject Title of task Task details Description of task Type of assessment Purpose of assessment Assessment strategy Evidence to be collected Suggested
More informationLab 4: Introduction to ELVIS II+ Introduction to ELVIS II+
Page 1 of 12 Laboratory Goals Introduction to ELVIS Lab 4: Introduction to ELVIS Familiarize students with the National Instruments hardware ELVIS Identify the capabilities of ELVIS Make use of the built
More informationNATIONAL CERTIFICATE (VOCATIONAL) ELECTRONIC CONTROL AND DIGITAL ELECTRONICS NQF LEVEL 2 NOVEMBER 2009
NATIONAL CERTIFICATE (VOCATIONAL) ELECTRONIC CONTROL AND DIGITAL ELECTRONICS NQF LEVEL 2 NOVEMBER 2009 (12041022) 30 October (Y-Paper) 13:00 16:00 Calculators may be used. This question paper consists
More informationLesson 2: DC Bias Point Analysis
2 Lesson 2: DC Bias Point Analysis Lesson Objectives After you complete this lesson you will be able to: Create a simulation profile for DC Bias analysis Netlist the design for simulation Run a DC Bias
More informationUser's Guide. 800 Amp Clamp Meters. EX710 AC Clamp meter EX720 True RMS AC Clamp meter EX730 AC/DC True RMS Clamp meter
User's Guide 800 Amp Clamp Meters EX710 AC Clamp meter EX720 True RMS AC Clamp meter EX730 AC/DC True RMS Clamp meter Introduction Congratulations on your purchase of the EX710, EX720, or EX730 Clamp DMM.
More informationScience Class 8 Topic: Electrical Circuits Reinforcement Worksheet. Name: Sec: Date: Q1. Choose the best answer:
Science Class 8 Topic: Electrical Circuits Reinforcement Worksheet Name: Sec: Date: Q1. Choose the best answer: 1. From the four circuits shown, which will have 'the brightest lit lamp or lamps'? Note
More informationScore. Test. Issued. Date. Name:
Name: Date Issued Test Score 1073 2 Workbook Summary To learn about Arduino electronics. To learn how to upload a code the Arduino UNO board. To learn the basic principles of electricity. To learn about
More informationAppendix D: Equipment
Appendix D: Equipment ELECTROSTATIC PAPER AND ACCESSORIES: To investigate electric fields with the electrostatic paper, you need to do the following: Lay the electrostatic paper flat.. Distribute the pieces
More informationUSER'S MANUAL DCL-650
USER'S MANUAL Clamp on Multimeter - Compact Design True RMS AC/DC DCL-650 CIRCUIT-TEST ELECTRONICS www.circuittest.com Safety International Safety Symbols This symbol, adjacent to another symbol or terminal,
More informationCommon Number Systems
Common Number Systems System Base Symbols Used by humans? Used in computers? Decimal 10 0, 1, 9 Yes No Binary 2 0, 1 No Yes Octal 8 0, 1, 7 No No Hexadecimal 16 0, 1, 9, A, B, F No No Quantities/Counting
More informationDigital Pins and Constants
Lesson Lesson : Digital Pins and Constants Digital Pins and Constants The Big Idea: This lesson is the first step toward learning to connect the Arduino to its surrounding world. You will connect lights
More informationReview Questions on Computer Power Supplies
Review Questions on Computer Power Supplies 1. What are the nominal voltages usually provided in a computer power supply? 2. How many amperes are normally required to operate a 17-inch monitor operating
More information2. Control Pin Functions and Applications
IMARY CONTROL ( PIN) Module Enable / Disable. The module can be disabled by pulling the below 2.3 V with respect to the Input. This should be done with an open-collector transistor, relay, or optocoupler.
More informationNATIONAL CERTIFICATE (VOCATIONAL) ELECTRONIC CONTROL AND DIGITAL ELECTRONICS NQF LEVEL 2 SUPPLEMENTARY EXAMINATION 2010
NATIONAL CERTIFICATE (VOCATIONAL) ELECTRONIC CONTROL AND DIGITAL ELECTRONICS NQF LEVEL 2 SUPPLEMENTARY EXAMINATION 2010 (12041022) 19 February (Y-Paper) 13:00 16:00 Calculators may be used. This question
More informationModel A Mini AC/DC Clamp Meter. User's Guide
Model 380950 80A Mini AC/DC Clamp Meter User's Guide Introduction Congratulations on your purchase of the Extech 80A Mini AC/DC Clamp Meter. The Model 380950 measures AC/DC Current, AC/DC Voltage, Resistance,
More informationObjectives: - You need to be able to use the two equations above and the series and parallel circuit rules.
F: Solve Complete Circuits Level 3 Prerequisite: Solve Ohm s Law and the Power Formula Points To: Solve Complete Circuit with Nontraditional Information Objectives: V = IR P = IV - Given a battery and
More informationBERMAD Irrigation. BIC Wire RTU
BIC 2500 2-Wire RTU System guide Versions : 2007 Contents 1. System Overview 3 1.1. Technical SpecificationS 3 1.1. System ComponentS 4 2. Installation 5 2.1 Cable Test 5 2.2. Ground RodS 6 2.3 Addressing
More informationUsing solderless breadboards
Page 1 of 9 Using solderless breadboards This document describes how to use the solderless breadboards available in the experimental didactic lab (LED, previously LADISPE) of Politecnico di Torino. 1 Setting
More informationCollege of Computer and Information Sciences Department of Computer Science. CSC 220: Computer Organization. Unit1 Number Systems
College of Computer and Information Sciences Department of Computer Science CSC 220: Computer Organization Unit1 Number Systems Common Number Systems System Base Symbols Used by humans? Used in computers?
More information1. INTRODUCTION. PSpice with OrCAD Capture (release 16.6 edition)
1. INTRODUCTION SPICE (Simulation Program for Integrated Circuits Emphasis.) is a powerful general purpose analog and mixed-mode circuit simulator that is used to verify circuit designs and to predict
More informationStep 1 - Modifying the power-supply from 12 to 16 Volts Increasing the power-supply voltage to 16V increases the headroom and reduces distortion. Also
Dada Electronics - Quad 33 Revision - Illustrated Guidelines V 2.4 First of all, thanks for your purchase of our upgrade kit! Hereunder, you will find the step-by-step guidelines for upgrading the Quad
More informationThis Presentation Will
Investigating Basic Circuits Pre-Activity Discussion Digital Electronics 2014 Project Lead The Way, Inc. This Presentation Will Introduce you to basic circuits and their symbols. Introduce you to components
More informationUser's Guide. Digital Multimeter. Model MN42
User's Guide Digital Multimeter Model MN42 Introduction Congratulations on your purchase of the Extech MN42 MultiMeter. The MN42 offers AC/DC Voltage, DC Current, and Resistance testing. Proper use and
More informationHow to use this simulator
How to use this simulator Introduction Reference Designs Simulation Types Simulation Time Schematic Editing Execute Simulation Thermal Results Result Waveforms Zooming Panning Cursors Moving Store and
More informationSTAGE INTERCOM KIT 1.1 SPECIFICATION. General: The lower section is a small power amplifier designed to drive headphones or a small 8ohm speaker.
STAGE INTERCOM KIT Version 2.1.1 - March 2018 - EduTek Ltd 1.0 DESCRIPTION This intercom module comprises of two separate circuits sharing the same supply. The upper section is a pre-amplifier designed
More informationITEC 1011 Introduction to Information Technologies
Number Systems Common Number Systems System Base Symbols Used by humans? Used in computers? Decimal 10 0, 1, 9 Yes No Binary 2 0, 1 No Yes Octal 8 0, 1, 7 No No Hexadecimal 16 0, 1, 9, A, B, F No No Quantities/Counting
More informationoutput devices. connected to the controller. data communications link. relay systems. user program. MECH1500Quiz1ReviewVersion2 Name: Class: Date:
Class: Date: MECH1500Quiz1ReviewVersion2 True/False Indicate whether the statement is true or false. 1. The number and type of I/Os cannot be changed in a fixed PLC. 2. In a PLC system, there is a physical
More informationChapter 5 Review. Power Supplies
Chapter 5 Review Power Supplies Name Period Date Score Write your answers in the spaces provided at the end of the question. For fill-in-the-blank questions, provide the word or words needed to complete
More informationMini Digital Multimeter
User's Guide Mini Digital Multimeter Model MN15 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com Back to the Extech MN15/MN16 Series
More informationDREAM 2 WIRED RTU SYSTEM GUIDE
TALGIL COMPUTING & CONTROL LTD. NAAMAN CENTER, HAIFA - ACCO ROAD ISRAEL P.O. BOX 775 KIRYAT MOTZKIN 26119 TEL: 972-4-8775947-8775948 FAX: 972-4-8775949 DREAM 2 WIRED SYSTEM GUIDE 2007 1 CONTENTS 1. SYSTEM
More informationENGR 210 Lab1. Ohm's Law
ENGR 210 Lab1 Ohm's Law Background In the class lectures we have discussed the fundamental electrical quantities of voltage, current and resistance. Since these quantities are so important there are specialized
More informationUser Manual Extech EX820 True RMS 1000 Amp Clamp Meter with IR Thermometer
User Manual Extech EX820 True RMS 1000 Amp Clamp Meter with IR Thermometer Additional User Manual Translations available at www.extech.com Introduction Congratulations on your purchase of the Extech EX820
More informationElectronic Devices. Special Purpose Diodes. Chapter Three. Dr. Hisham Alrawashdeh
Electronic Devices Chapter Three Special Purpose Diodes Dr. Hisham Alrawashdeh Chapter Three Special Purpose Diodes Introduction Chapter 2 was devoted to general-purpose and rectifier diodes, which are
More informationAutoranging Mini Multimeter
User Manual Autoranging Mini Multimeter Model MN16A Additional User Manual Translations available at www.extech.com Introduction Congratulations on your purchase of the Extech MN16A Autoranging Multimeter.
More informationModel R5010. TRMS Digital Multimeter. Instruction Manual
INSTRUMENTS Model R5010 TRMS Digital Multimeter Instruction Manual Table of Contents Safety...3-4 IEC1010 Overvoltage Installation Category... 3 Warnings... 4 Features... 5 Specifications...5-8 Instrument
More information700 Series 200 Amp Clamp Meters
700 Series 200 Amp Clamp Meters #61-700 #61-701 #61-702 1 2 3 6 5 7 4 8 1. Non-contact voltage (NCV) (#61-701 and #61-702) With the NCV tab on the tip of the clamp close to an AC voltage, press the NCV
More informationModel R5005. Instruction Manual. True RMS Industrial Multimeter. reedinstruments. www. com
Model R5005 True RMS Industrial Multimeter Instruction Manual reedinstruments com Table of Contents Safety... 4 Features... 5 Specifications...5-6 Instrument Description...7-8 Operating Instructions...9-13
More informationModel R5010. Instruction Manual. TRMS Digital Multimeter. reedinstruments www.
Model R5010 TRMS Digital Multimeter Instruction Manual reedinstruments www com Table of Contents Safety...3-4 Features... 5 Specifications...5-8 Instrument Description...8-9 Operating Instructions...10-16
More informationMS2115B Dual Display Digital Clamp Meter Operation Manual ZERO MIN RANGE HOLD
MS2115B Dual Display Digital Clamp Meter Operation Manual REL MAX B.L ZERO MIN RANGE HOLD B CONTENTS 1. Safety Information...1 1.1 Preparation...1 1.2 Usage...2 1.3 Mark...3 1.4 Maintenance...4 2. Description...4
More informationDigital Clamp-on Meter Instruction Manual
265 Digital Clamp-on Meter Instruction Manual TABLE OF CONTENTS A. INTRODUCTION 1. Congratulations...3 2. Product Description...3 3. Declaration of Conformity...4 B. SAFETY CONSIDERATIONS...5 C. TECHNICAL
More informationMini Digital Multimeter
User Manual Mini Digital Multimeter Model MN15A Additional User Manual Translations available at www.extech.com Introduction Congratulations on your purchase of the Extech MN15A MultiMeter. The MN15A offers
More informationBench Multimeter. Users Manual
Bench Multimeter Users Manual Bench Multimeter Users Manual Introduction This manual contains information and warnings, which must be followed to ensure safe operation and retain the meter in safe condition.
More informationMP3 audio amplifier. Build Instructions. Issue 2.0
MP3 audio amplifier Build Instructions Issue 2.0 Build Instructions Before you put any components in the board or pick up the soldering iron, just take a look at the Printed Circuit Board (PCB). The components
More informationLDD M SERIES INSTRUCTION MANUAL LDD M SERIES
TM LDD M SERIES LDD M SERIES INSTRUCTION MANUAL P O Box Bozeman, MT 9 Phone (0) -90 Fax (0) -9 email sales@wavelengthelectronics.com www.wavelengthelectronics.com TABLE OF CONTENTS Features... Customer
More information4000 SERIES REGULATED HIGH VOLTAGE DC TO DC CONVERTERS
Proven Reliability 4000 SERIES REGULATED HIGH VOLTAGE DC TO DC CONVERTERS 1,000 V to 33,000 VDC @ 10 Watts PRODUCT SELECTION TABLE PRODUCT DESCRIPTION The 4000 Series is a line of fully adjustable DC to
More informationExtech EX820 True RMS 1000 Amp Clamp Meter with IR Thermometer. User's Guide
Extech EX820 True RMS 1000 Amp Clamp Meter with IR Thermometer User's Guide Introduction Congratulations on your purchase of the Extech EX820 True RMS 1000A Clamp Meter. This meter measures AC/DC Voltage,
More informationDIGITAL MULTIMETERS. Accuracy +5% Resolution 1pF Accessories Test leads, Manual, 9V Battery included Options ST-265, C-90, C W x 6 L x 1.
DIGITAL MULTIMETERS Model M-1700 Model M-2775 Diode and Transistor Test AC/DC Current to 10A Three Way Overload Protection Extra Large 1 display test Data Hold Transistor / Diode Test AC/DC Current to
More informationB.Sc. (Computer Science) (Part 1) EXAMINATION, 2009 COMPUTER PROGRAMMING FUNDAMENTAL
1 COMPUTER PROGRAMMING FUNDAMENTAL Attempt any five questions. All questions carry equal marks. 1. Differentiate algorithm and program. How a program is developed? Discribe the importance of algorithm
More information! Warning, refer to accompanying documents.
About this Manual To the best of our knowledge and at the time written, the information contained in this document is technically correct and the procedures accurate and adequate to operate this instrument
More informationESD CONTROL SURVEY - REPORT
ESD CONTROL SURVEY - REPORT Survey for: Kruizinga B.V. Address: Ir. R.R. van der Zeelaan 1 8191 JH WAPENVELD The Netherlands For: Mr. F. Vorderman Survey Date: 16-03-2015 Prepared by: Marco Waarma Copy
More informationExperiment 0: Introduction to Cadence
UNIVERSITY OF CALIFORNIA AT BERKELEY College of Engineering Department of Electrical Engineering and Computer Sciences EE105 Lab Experiments Experiment 0: Introduction to Cadence Contents 1. Introduction...
More informationUser's Guide Extech EX840 True RMS 1000 Amp Clamp Meter with IR Thermometer
User's Guide Extech EX840 True RMS 1000 Amp Clamp Meter with IR Thermometer Patented Introduction Congratulations on your purchase of the Extech EX840 CAT IV True RMS 1000A Clamp Meter. This meter measures
More informationSIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR (AUTONOMOUS) Siddharth Nagar, Narayanavanam Road QUESTION BANK (DESCRIPTIVE) UNIT I
QUESTION BANK 2017 SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR (AUTONOMOUS) Siddharth Nagar, Narayanavanam Road 517583 QUESTION BANK (DESCRIPTIVE) Subject with Code : Basic Electronic Devices (16EC401) Year
More informationThe Programmable Mixed Signal Company
The Programmable Mixed Signal Company 1 Table of Contents 1. Introduction 2. Digitally Controlled Potentiometer 3. Advantages of XDCP Calibration of Power Supply 4. Front End 5. Power Mesh 6. Secondary
More informationUser's Guide. MiniTec TM Series Model MN25 MultiMeter
User's Guide MiniTec TM Series Model MN25 MultiMeter Warranty EXTECH INSTRUMENTS CORPORATION warrants this instrument to be free of defects in parts and workmanship for one year from date of shipment (a
More informationUniversal Keying Adapter 3+
Universal Keying Adapter 3+ The Universal Keying Adapter Version 3+ kit will allow you to key nearly any transmitter or transceiver with a straight key, electronic keyer, computer serial or parallel port
More informationMini Digital Multimeter
User's Guide Mini Digital Multimeter Model MN15 Introduction Congratulations on your purchase of the Extech MN15 MultiMeter. The MN15 offers AC/DC Voltage, AC/DC Current, Resistance, Diode, and Continuity
More informationMICRO BURN IN PRODUCTS LISTED IN MODEL NUMBER ORDER FOLLOWED BY A BRIEF DESCRIPTION
MICRO BURN IN PRODUCTS LISTED IN MODEL NUMBER ORDER FOLLOWED BY A BRIEF DESCRIPTION MODEL 102P 102R DESCRIPTION Floor Stand (Plane) Floor Stand (Modified) HTRB Burn-In System (diode) Component Burn-In
More informationPeakTech Prüf- und Messtechnik
PeakTech 2025 Communication protocol Connection settings: Supported: Vendor ID: Product ID: Mode: Frame size: Comments: Yes USB 0x2571 0x4100 RAW HID 8 bytes Dependent on USB implementation you may receive
More informationTrue RMS Digital Bench Multimeter Model:
True RMS Digital Bench Multimeter Model: 72-1016 1 IMPORTANT SAFETY INFORMATION Please read these instructions carefully before use and retain for future reference. This meter is designed to meet IEC61010-1,
More informationInstallation/assembly manual for DCC/Power shield
Installation/assembly manual for DCC/Power shield The DCC circuit consists of the following components: R1/R6 R2/R3 R4/R5 D1 C2 2 kω resistor ½ Watt (colour code Red/Black/Black/Brown/Brown) 10 kω resistor
More informationThursday, September 15, electronic components
electronic components a desktop computer relatively complex inside: screen (CRT) disk drive backup battery power supply connectors for: keyboard printer n more! Thursday, September 15, 2011 integrated
More informationERICSSONZ LBI-38566B MAINTENANCE MANUAL AUDIO BRIDGE MODULE 19D902458G1 TABLE OF CONTENTS
B MAINTENANCE MANUAL AUDIO BRIDGE MODULE 19D92458G1 TABLE OF CTENTS Page SPECIFICATIS............................................. 1 DESCRIPTI............................................... 1 CIRCUIT ANALYSIS
More informationFundamentals of Programming
Fundamentals of Programming Lecture 2 Number Systems & Arithmetic Lecturer : Ebrahim Jahandar Some Parts borrowed from slides by IETC1011-Yourk University Common Number Systems System Base Symbols Used
More informationLecture (01) Digital Systems and Binary Numbers By: Dr. Ahmed ElShafee
١ Lecture (01) Digital Systems and Binary Numbers By: Dr. Ahmed ElShafee Digital systems Digital systems are used in communication, business transactions, traffic control, spacecraft guidance, medical
More informationPULSE/TONE TELEPHONE KIT
PULSE/TONE TELEPHONE KIT MODEL AK-700/PT-323K Assembly and Instruction Manual Elenco Electronics, Inc. Copyright 2006, 1994 Elenco Electronics, Inc. Revised 2006 REV-N 753700 No part of this book shall
More informationQ SERIES. Proven Reliability NOW UL RECOGNIZED. ISOLATED, PROPORTIONAL DC TO HV DC CONVERTERS 100V to 0.5 and 1.25 Watts PRODUCT OVERVIEW
Proven Reliability Q SERIES ISOLATED, PROPORTIONAL DC TO HV DC CONVERTERS 100V to 10,000V @ 0.5 and 1.25 Watts PRODUCT OVERVIEW NOW UL RECOGNIZED PRODUCT DESCRIPTION The Q Series is a broad line of ultra-miniature,
More informationUseful Information about HSPICE By: Dr. Behzad Nouri June, Introduction 1. Bibliography 6
Useful Information about HSPICE By: Dr. Behzad Nouri June, 2016 Contents 1 Introduction 1 2 Simulation Options 2 Bibliography 6 A Appendix: Scale Factor Notations and Units 7 A.1 Numeric Scale Factor...................................
More informationFigure 1 FS710 Front Panel
INTRODUCTION The Model FS710 10 MHz AGC Distribution Amplifier provides seven sine wave outputs from a single 10 MHz source. Designed as an accessory to the FS700 LORAN Receiver, the FS710 AGC circuitry
More informationQ SERIES. Proven Reliability NOW UL RECOGNIZED. ISOLATED, PROPORTIONAL DC TO HV DC CONVERTERS 100V to 0.5 and 1.25 Watts PRODUCT OVERVIEW
Proven Reliability Q SERIES ISOLATED, PROPORTIONAL DC TO HV DC CONVERTERS 100V to 10,000V @ 0.5 and 1.25 Watts PRODUCT OVER NOW UL RECOGNIZED PRODUCT DESCRIPTION The Q Series is a broad line of ultra-miniature,
More informationLED55WPG Programmable LED Driver
Dimmable Constant Current Rev 8-9-7 Electrical Specifications Input Voltage Range: Frequency: Power Factor: Inrush Current: Input Current (Max): -77 Vac Nom. (8-35 V Min/Max) 5/6 Hz Nom. (47-63 Hz Min/Max)
More informationEVAL-INAMP-62RZ/82RZ/82RMZ
Evaluation Boards for the AD620 Series and and the AD8220 Series Instrumentation Amplifiers EVAL-INAMP-62RZ/82RZ/82RMZ FEATURES 3 generic, easy-to-use PC boards Support several related in-amp products
More informationLab 2.2 Ohm s Law and Introduction to Arduinos
Lab 2.2 Ohm s Law and Introduction to Arduinos Objectives: Get experience using an Arduino Learn to use a multimeter to measure Potential units of volts (V) Current units of amps (A) Resistance units of
More informationMMS3000-GP MMS3000-GP MMS3000 MMS3000-GP MMS3000-GP4 GP8
Engineers require data recording instruments that are truly flexible, that quickly and easily adapt to a variety of measurement applications. At the same time, Accountants and Financial Controllers demand
More informationAUDIO AMPLIFIER PROJECT
Intro to Electronics 110 - Audio Amplifier Project AUDIO AMPLIFIER PROJECT In this project, you will learn how to master a device by studying all the parts and building it with a partner. Our test subject:
More informationCONNECTING SENSORS TO DATA ACQUISITION SYSTEM ANALOG INPUTS
CONNECTING SENSORS TO DATA ACQUISITION SYSTEM ANALOG INPUTS Properly connecting sensors to a data acquisition system is as crucial as selecting the proper sensor for the application, and there are multiple
More informationCopyright 2008 Linear Technology. All rights reserved. Getting Started
Copyright. All rights reserved. Getting Started Copyright. All rights reserved. Draft a Design Using the Schematic Editor 14 Start with a New Schematic New Schematic Left click on the New Schematic symbol
More informationZENSOL CIRCUIT BREAKER PERFORMANCE ANALYZER
ZENSOL AUTOMATION INC. COMPUTERIZED TEST EQUIPMENT ZENSOL CIRCUIT BREAKER PERFORMANCE ANALYZER CBA-32P Micro CBA MANUAL 1W E OPERATOR S GUIDE Version 1.70 January 2001 www.zensol.com Man-1we.doc Rév 5
More informationWhat is Locktronics? Science and technology. Electronics. Engineering. Automotive. Aviation maintenance. Simplifying Electricity & Electronics
What is Locktronics? Simplifying Electricity & Electronics Locktronics is a range of products that simplifies the process of learning and teaching electricity and electronics. The core range consists of
More informationEntry Level Assessment Blueprint Electrical Occupations
Entry Level Assessment Blueprint Electrical Occupations Test Code: 3029 / Version: 01 Specific Competencies and Skills Tested in this Assessment: Safety Apply shop safety rules and ergonomics Explain fire
More informationAutoranging Mini Multimeter Model MN16A
User's Guide Autoranging Mini Multimeter Model MN16A Introduction Congratulations on your purchase of the Extech MN16A Autoranging Multimeter. This meter measures AC/DC Voltage, AC/DC Current, Resistance,
More informationLecture (01) Introduction Number Systems and Conversion (1)
Lecture (01) Introduction Number Systems and Conversion (1) By: Dr. Ahmed ElShafee ١ Digital systems Digital systems are used in communication, business transactions, traffic control, spacecraft guidance,
More informationUser's Guide. True RMS Multimeter plus IR Thermometer. Extech 470 Patent Pending
User's Guide True RMS Multimeter plus IR Thermometer Extech 470 Patent Pending Introduction Congratulations on your purchase of the Extech 470 (part number EX470) True RMS Autoranging Multimeter plus IR
More informationClick on the SwCAD III shortcut created by the software installation.
LTSpice Guide Click on the SwCAD III shortcut created by the software installation. Select File and New Schematic. Add a component Add a resistor Press R or click the resistor button to insert a resistor.
More informationCharacterizing Touch Panel Sensor ESD Failure with IV-Curve TLP (System Level ESD)
Characterizing Touch Panel Sensor ESD Failure with IV-Curve TLP (System Level ESD) Wei Huang, Jerry Tichenor, David Pommerenke 2014 ESDA Exhibition Booth 606 Web: www.esdemc.com Email: info@esdemc.com
More informationUser Guide True RMS Multimeter Extech EX205T
User Guide Extech EX205T True RMS Digital Multimeter Extech EX210T True RMS Digital Multimeter IR True RMS Multimeter Extech EX205T Introduction Thank you for selecting the Extech EX205T True RMS Auto-ranging
More informationz482 Digital I/O Module PXI Express
TECHNICAL SPECIFICATIONS z482 Digital I/O Module PXI Express 2017 LitePoint, A Teradyne Company. All rights reserved. Port Description OUTPUT (VHDCI, 68-Position, Receptacle) z482 Digital I/O Module PXI
More informationBuild Your Own Home Security System
Build Your Own Home Security System Student Lab Guide Engineering Teaching Laboratory Name Date Lab Partner(s) NEW TERMS Electric Circuit: Electric circuits are paths for transmitting electric current,
More informationUser's Guide. True RMS Multimeter plus IR Thermometer. Extech 470 Patented
User's Guide True RMS Multimeter plus IR Thermometer Extech 470 Patented Introduction Congratulations on your purchase of the Extech 470 (part number EX470) True RMS Autoranging Multimeter plus IR Thermometer.
More informationStep 1 The tools & the Components The tools you need: A good quality soldering iron with a fine point (max 30) Watt or a soldering-station. A desolder
Upgrade/revision manual Quad 44 pre amplifier. V2.5 These are the illustrated step-by-step guidelines for upgrading your Quad 44 with the Dada Electronics upgrade-kits. The Quad 44 preamp was the first
More informationThese are the illustrated step-by-step guidelines for upgrading your Quad 306 with the Dada Electronics upgrade-kit.
Quad 306 DIY illustrated guidelines version 1.1 These are the illustrated step-by-step guidelines for upgrading your Quad 306 with the Dada Electronics upgrade-kit. We will replace all electrolytic capacitors,
More informationQ SERIES. Proven Reliability NOW UL RECOGNIZED. ISOLATED, PROPORTIONAL DC TO HV DC CONVERTERS 100V to 0.5 Watts PRODUCT OVERVIEW MODELS
Proven Reliability Q SERIES ISOLATED, PROPORTIONAL DC TO HV DC CONVERTERS 100V to 10,000V @ 0.5 Watts PRODUCT OVER NOW UL RECOGNIZED VOLTAGE* 2 MODELS 100 VDC Q01 150 VDC Q015 PRODUCT DESCRIPTION The Q
More informationAgilent 3630A Triple DC Power Supply. Agilent 34401A Digital Multimeter (DMM)
Agilent E3630A Triple DC Power Supply and Agilent 34401A Digital Multimeter (DMM) Agilent 3630A Triple DC Power Supply The DC power supply used in this lab is the Agilent E3630A Triple DC power supply.
More informationImages Scientific OWI Robotic Arm Interface Kit (PC serial) Article
Images Scientific OWI Robotic Arm Interface Kit (PC serial) Article Images Company Robotic Arm PC Interface allows real time computer control and an interactive script writer/player for programming and
More informationOwner's Manual. True RMS Multimeter. Model No Safety Operation Maintenance Español
Owner's Manual True RMS Multimeter Model No. 82023 CAUTION: Read, understand and follow Safety Rules and Operating Instructions in this manual before using this product. Safety Operation Maintenance Español
More informationCHAPTER 5. Voltage Regulator
CHAPTER 5 Voltage Regulator In your robot, the energy is derived from batteries. Specifically, there are two sets of batteries wired up to act as voltage sources; a 9V battery, and two 1.5V batteries in
More informationAutomotive Electronics Council Component Technical Committee
ATTACHMENT 3 AEC - Q100-003 REV-E MACHINE MODEL ELECTROSTATIC DISCHARGE TEST Acknowledgment Any document involving a complex technology brings together experience and skills from many sources. The Automotive
More informationAlarm Circuits Explained. A Guide to Inputs and Outputs Used in Video Security
A Guide to Inputs and Outputs Used in Video Security ev 1.1 Updated 11-Mar-2013 Content Content... 2 Introduction... 3 Useful Terminology... 3 Digital Input Circuits... 4 Opto-isolator Input... 4 Switch
More informationDigital Clamp-on Meter Instruction Manual
275 Digital Clamp-on Meter Instruction Manual TABLE OF CONTENTS A. INTRODUCTION 1. Congratulations...3 2. Product Description...3 3. Declaration of Conformity...4 B. SAFETY CONSIDERATIONS...5 C. TECHNICAL
More informationDigital Clamp-on Meter Instruction Manual
275 Digital Clamp-on Meter Instruction Manual TABLE OF CONTENTS A. INTRODUCTION 1. Congratulations...3 2. Product Description...3 3. Declaration of Conformity...4 B. SAFETY CONSIDERATIONS...5 C. TECHNICAL
More information