Motion technologies TIP-ON for doors

Transcription

1 TIP-ON for doors Opening comfort for handle-less fronts Handle-less furniture is becoming more and more popular in the home. With TIP-ON, we offer a mechanical opening support system for handle-less furniture fronts. This enables your customers to open and close handle-less furniture fronts easily and effortlessly. TIP-ON can be used in the kitchen as well as in all other living areas. You will always find the right TIP-ON unit for doors thanks to the wide range of colours and adapters. You can choose between the short and long version of TIP-ON, for drilling or with an adapter plate depending on the application. The door gap adjustment feature is integrated in all models. Easy to open with just a touch Handle-less doors can be opened easily with TIP-ON a light touch is all that s needed The door then opens at an angle that is comfortable for the furniture user With three colour variants, TIP-ON can be optimally adjusted to the cabinet interior The door gap can easily be set using the ejector High quality down to the smallest detail The TIP-ON unit can be attached to the cabinet front edge The TIP-ON unit can also be attached to the cabinet interior using horizontal adapter plates The TIP-ON unit can also be attached to the cabinet interior using cruciform adapter plates The catch plate is the counterpart to TIP-ON. There are two variants, self-adhesive, or a version that screws to the door 652

2 TIP-ON for doors Overview TIP-ON 956x TIP-ON 956. short version with magnet 654 TIP-ON 956A long version with magnet 654 TIP-ON 956A long version with bumper 654 Symbolic image Accessories Inline adapter plates 655 Cruciform adapter plates 655 Symbolic image, removal and adjustment 656 Adjustment 656 Symbolic image Pictograph Item Available Upon Request, removal and adjustment Accessories General Information TIP-ON for doors Chipboard screw fixing System screw fixing 653

3 TIP-ON for doors TIP-ON 956x TIP-ON 956. short version with magnet SW TS R Composed of: 1 x TIP-ON 956. short version with magnet 1 x Glue-on catch plate 1 x Screw-on catch plate - For overlay doors (up to approx mm height) - For use with unsprung Blum hinges - For drilling or in combination with adapter plates - Output path approx. 17 mm - Setting +4/ 1 mm Glue-on catch plate () Screw-on catch plate Screw-on catch plate TIP-ON 956A long version with magnet SW TS R A1004 Composed of: 1 x TIP-ON 956A long version with magnet 1 x Glue-on catch plate 1 x Screw-on catch plate TIP-ON 956A long version with bumper - For overlay doors (starting at approx mm height) and all inset applications - For use with unsprung Blum hinges - For drilling or in combination with adapter plates - Output path approx. 38 mm - Setting +4/ 1 mm - For use with sprung Blum hinges - For drilling or in combination with adapter plates - Output path approx. 38 mm - Setting +4/ 1 mm SW TS R A1006 Composed of: 1 x TIP-ON 956A long version with bumper No catch plate needed (we recommend using a catch plate for very soft surfaces) Glue-on catch plate () Screw-on catch plate Screw-on catch plate Page instructions Overview TIP-ON for doors 653 Accessories straight adapter plates 655 Accessories cruciform adapter plates 655 position and number required 656, removal and adjustment 656 Drilling template for BLUMOTION/TIP-ON 744 Positioning template for catch plate 766 PRO-CENTER

4 TIP-ON for doors Accessories Inline adapter plate short version 20/17 SW TS R7036 NI-L NI-L Nickel-lacquered - Fixing with chipboard screws Ø 3.5 or Ø 4 mm - Alternative assembly with system screws - TIP-ON must be ordered separately Catch plate Inline adapter plate long version 20/32 SW TS R7036 NI-L 956A1201 NI-L Nickel-lacquered Catch plate Cruciform adapter plate long version 37/32 R A Fixing with chipboard screws Ø 3.5 or Ø 4 mm - Alternative assembly with system screws - TIP-ON must be ordered separately - Fixing with chipboard screws Ø 3.5 or Ø 4 mm - Alternative assembly with system screws - TIP-ON must be ordered separately Catch plate Page instructions Overview TIP-ON for doors 653 position and number required 656, removal and adjustment 656 Template 742 Drilling template for mounting plates 743 Positioning template for catch plate 766 PRO-CENTER 692 MINIPRESS PRO 696 MINIPRESS P 708 MINIPRESS M

5 TIP-ON for doors, removal and adjustment position and number required Optimal opening support is ensured when the TIP-ON unit is attached in the actual handle position This can deviate ±300 mm and up to a quarter of the cabinet width for the width. Also for larger doors only 1 pce/door TIP-ON 956x for drilling Attention: TIP-ON do not glue Clean, oil-free, dry surface For hard surfaces and/or MDF Ø 2.5 mm pre-drilling and countersinking TIP-ON 956x with horizontal adapter plate Clean, oil-free, dry surface For hard surfaces and/or MDF Ø 2.5 mm pre-drilling and countersinking TIP-ON 956x with cruciform adapter plate Clean, oil-free, dry surface For hard surfaces and/or MDF Ø 2.5 mm pre-drilling and countersinking 656

6 TIP-ON for doors, removal and adjustment Depth adjustment 657