= 1.0 meter. 50 = 5.0 meter. 90 = 9.0 meter. 95 = 9.5 in. NOTE: Highlighted lengths are stocked for shorter lead times
|
|
|
- Ellen Leonard
- 5 years ago
- Views:
Transcription
1 DP1007 Series Intrinsically Safe, PRO 11 mm, 1/2 20 Case Thread, Eddy Current/s with Jacketed Cable PRO DP1007 series proximity probes measure shaft vibration and displacement on Class I Zone 0 A Ga 11 mm probe tip diameter with 1/2-20 threaded body 316L stainless steel probe body and jam nuts 7/16 in wrench flats at cable end of probe body FEP jacketed cable, available with optional 304 stainless steel armor jacket DP1007 A A B B C C = 1/2-20 No 02 = 1/ = 0.0 in 05 = 0.5 in 10 = 1.0 in 20 = 2.0 in 40 = 4.0 in 50 = 5.0 in 60 = 6.0 in 70 = 7.0 in 15 = 1.5 in 20 = 2.0 in 30 = 3.0 in 40 = 4.0 in 60 = 6.0 in 70 = 7.0 in 80 = 8.0 in 95 = 9.5 in with connector protector 30 = 3.0 in 80 = 8.0 in NOTE: 0.5 in. increments up to 1 in. less than the case length 50 = 5.0 in Example Part Number: DP No armor, 0.5 inch no thread length, 1.5 inch case length, 1.0 meter total length, mini coax with connector protector, CSA, ATEX, certified Page 464
2 DP1007 Series Intrinsically Safe, PRO 11 mm, M14x1.5 Case Thread, Eddy Current/s with Jacketed Cable PRO DP1007 series proximity probes measure shaft vibration and displacement on 11 mm probe tip diameter with M14x1.5 threaded body 316L stainless steel probe body and jam nuts 12 mm wrench flats at cable end of probe body FEP jacketed cable, available with 304 optional stainless steel armor jacket AA B B CC Class I Zone 0 A Ga DP Case Thread No Thread Length Case Length Total Length Connector Regulatory Approval 03 = M14x1.5 No 04 = M14x = 0 mm 01 = 10 mm 02 = 20 mm 03 = 30 mm 04 = 40 mm 05 = 50 mm 06 = 60 mm 07 = 70 mm 08 = 80 mm 10 = 100 mm 12 = 120 mm 14 = 140 mm 16 = 160 mm 18 = 180 mm 20 = 200 mm 22 = 220 mm 03 = 30 mm 04 = 40 mm 05 = 50 mm 06 = 60 mm 07 = 70 mm 08 = 80 mm 10 = 100 mm 12 = 120 mm 14 = 140 mm 16 = 160 mm 18 = 180 mm 20 = 200 mm 22 = 220 mm 25 = 250 mm NOTE: 10 mm increments up to 30 mm less than the case length Example Part Number: DP No armor, 10 mm no thread length, 100 mm case length, 1.0 meter total length, mini coax with protector connector, CSA, ATEX, certified Page
3 DP Series Intrinsically Safe, PRO Reverse Mount* 11 mm, 3/8 24 Case Thread, Eddy Current/s *Requires Connector Tool Kit. See DM940-1A on page xx. PRO DP series proximity probes measure shaft vibration and displacement on 11 mm probe tip diameter with 3/8-24 threaded body 316L stainless steel probe body and integral jam nut 7/16 in wrench flats on front of probe FEP jacketed cable CC DP Class I Zone 0 A Ga 05 = reverse mount with 3/8-24 threaded body 02 = 0.2 in 18 = 1.8 in (See Note) NOTE: Connector must be installed in the field Example Part Number: DP Reverse mount with 3/8-24 threaded body, 0.2 inch no thread length, 1.8 inch case length, 5.0 meter total length, mini coax with protector connector, CSA, ATEX, certified Page 466
4 DP Series Intrinsically Safe, PRO Reverse Mount* 11 mm, M10x1 Case Thread, Eddy Current/s *Requires Connector Tool Kit. See DM940-1A on page xx. PRO DP series proximity probes measure shaft vibration and displacement on Class I Zone 0 A Ga 11 mm probe tip diameter with M10x1 threaded body 316L stainless steel probe body and integral jam nut 12 mm wrench flats on front of probe FEP jacketed cable C C DP = reverse mount with M10x1 threaded body 05 = 5 mm 46 = 46 mm (See Note) NOTE: Connector must be installed in the field Example Part Number: DP Reverse mount with M10x1 threaded body, 5 mm no thread length, 46 mm case length, 5.0 meter total length, mini coax with connector protector, CSA, ATEX, certified Page
5 DC Series Intrinsically Safe, PRO 11 mm Series, Extension Cable Standard Cable ed Cable PRO DC extension cables combine with PRO DP1007 series probes and PRO DD1007 series drivers to form a complete assembly to monitor vibration and shaft position. Class I Zone 0 A Ga Matched with PRO 11 mm probes and driver assemblies for cost effective and reliable measurements Excellent chemical resistance Protective sleeves to cover connections Connector pull strength up to 70 lbs Matched to 5 & 9 meter system lengths Male & female miniature threaded connectors FEP jacketed cable, available with optional 304 stainless steel armor jacket DC C C C System Length (REFERENCE ONLY) Total Length of Extension Cable 040 = 4.0 meter 080 = 8.0 meter 02 = No, with connector protector 03 = Yes, with connector protector Regulatory Approval Example Part Number: DC meter total length, no armor, with connector protector, CSA, ATEX, certified Page 468
Certified. 5 mm probe tip diameter with 1/4-28 threaded body. Probe tip and body sealed to prevent leaking through cable
DP1009 Series PRO FFv, 1/4-28 Case Thread, Eddy Current/ with Armor Jacketed Cable PRO DP1009 series proximity probes measure shaft vibration and 5 mm probe tip diameter with 1/4-28 Stainless steel probe
Certified. 5 mm probe tip diameter with 1/4-28 threaded body. Probe tip and body sealed to prevent leaking through cable
DX3309 Series BENTLY TM Compatible FFv, 1/4-28 Case Thread, Eddy Current/s with Armor Jacketed Cable Bently compatible DX3309 Series FFv Probes 5 mm probe tip diameter with 1/4-28 Stainless steel probe
991 Thrust Transmitter Bently Nevada* Asset Condition Monitoring
991 Thrust Transmitter Bently Nevada* Asset Condition Monitoring Description The 991 Thrust Transmitter is intended primarily for the original equipment manufacturers (OEMs) of centrifugal air compressors
991 Thrust Transmitter Bently Nevada* Asset Condition Monitoring
991 Thrust Transmitter Bently Nevada* Asset Condition Monitoring Description The 991 Thrust Transmitter is intended primarily for the original equipment manufacturers (OEMs) of centrifugal air compressors
3300 RAM and NSv Proximity Transducer System
33 RAM and NSv Proximity Transducer System Description The 33 RAM and NSv Proximity Transducer system is intended for centrifugal air compressors, refrigeration compressors, process gas compressors and
3300 XL 11mm Proximity Transducer System
33 XL 11mm Proximity Transducer System Bently Nevada* Asset Condition Monitoring Description Transducer System The 33 XL 11 mm Proximity Transducer System consists of: 33 XL 11 mm probe 33 XL 11 mm extension
DX3309 / DP1009 / DD / DC1009 Series
DX3309 / DP1009 / DD100980 / DC1009 Series FFv Proximity Probe Assembly MNX10071 REV C 11/6/2017 1 CONTENTS Section 1 : Overview... 4 Introduction... 4 Description... 4 Section 2: Probe Details... 5 Proximity
Proximity Transducers, Seismic Sensors and Accessories
PVTVM s Proximity Probe Selection Guide Part Number (Initial Prefix) TM0105 TM0180 TM0110 TM0120 Probe Tip Size 5mm 8mm 11mm 25mm Probe Model Type Standard, Standard, Standard, 7200 compatible 7200 compatible
3300 XL NSv* Proximity Transducer System Bently Nevada* Asset Condition Monitoring
33 XL NSv* Proximity Transducer System Bently Nevada* Asset Condition Monitoring Description The 33 XL NSv* Proximity Transducer system is intended for use with centrifugal air compressors, refrigeration
Proximity Probe Accessories
Proximity Probe Accessories Connector Protector Installation Tools MNX10079 REV B 5/10/2016 1 CONTENTS Section 1 : Overview... 3 Introduction... 4 Description..4 Product Selection Guide... 4 Section 2:
Compliance with API Standard 670 the PRO Product Standard for Proximity Probes
Connection Technology Center, Inc. 7939 Rae Boulevard Victor, New York 14564 Toll Free: (800) 999-5290 Phone: (585) 924-5900 Fax: (585) 924-4680 Compliance with API Standard 670 the PRO Product Standard
3300 XL NSv Proximity Transducer System
Specifications and Ordering Information 33 XL NSv Proximity Transducer System Patents: 5,16,343; 5,126,664; 5,351,388; 5,685,884 Description Transducer System The 33 XL NSv Proximity Transducer system
3300 XL 8mm Proximity Transducer System
33 XL 8mm Proximity Transducer System Product Datasheet Bently Nevada* Asset Condition Monitoring Description The 33 XL 8 mm Proximity Transducer System consists of: One 33 XL 8 mm probe, One 33 XL extension
Proximity Transducers, Seismic Sensors and Accessories
11mm Proximity Probe TM0110 System Linear range The 11mm probe has up to 4mm (160mil) linear range. The TM0110 probe is recommended when a longer linear range is required. The TM0110 proximity probe system
21000,24701 Proximity Probe Housing Assemblies Bently Nevada Asset Condition Monitoring
21000,24701 Proximity Probe Housing Assemblies Bently Nevada Asset Condition Monitoring Description Proximity Probe Housing Assemblies Bently Nevada offers two all-metal Proximity Probe Housing Assemblies
Proximity Transducers, Seismic Sensors and Accessories
PVTVM s Proximity Selection Guide Part Number (Initial Prefix) TM0105 TM0180 TM0110 TM0120 Tip Size 5mm 8mm 11mm 25mm Model Type Standard, Standard, Standard, 7200 compatible 7200 compatible 7200 compatible
3300 XL 11mm Proximity Transducer System
33 XL 11mm Proximity Transducer System Bently Nevada* Asset Condition Monitoring Description Transducer System The 33 XL 11 mm Proximity Transducer System consists of: 33 XL 11 mm probe 33 XL 11 mm extension
3300 XL 8mm Proximity Transducer System Bently Nevada* Asset Condition Monitoring
33 XL 8mm Proximity Transducer System Bently Nevada* Asset Condition Monitoring Description The 33 XL 8 mm Proximity Transducer System consists of: One 33 XL 8 mm probe, One 33 XL extension cable 1, and
深圳市永旭伟业贸易有限公司. Description. a mm probe 1, 2 a 3300 XL extension cable (ref ) a 3300 Proximitor Sensor 3, 4, 5 (ref )
Specifications and Ordering Information 3300 5mm Transducer Patents: 5,016,343; 5,126,664; 5,351,388; and 5,685,884 R Description Transducer System The 3300 5mm Proximity Transducer System consists of:
DD1590 Series Proximity Driver. Connection Technology Center, Inc. Vibration Analysis Hardware. DD1590 Series. Proximity Probe Driver.
Connection Technology Center, Inc. Vibration Analysis Hardware DD1590 Series Proximity Probe Driver Product Manual C:\Documents and Settings\mclarneys.ctc\Desktop\MNX10016 DD1590 PROXIMITY PROBE Manual.doc
Probe Pendulum for Eddy- Current Sensors
PR647 Specifications Sheet Probe Pendulum for Eddy- Current Sensors The Probe Pendulum for eddy-current Sensors is designed for critical turbomachinery applications such as steam, gas and hydro turbines,
21022 Dual Axial Probe Housing Assembly Bently Nevada* Asset Condition Monitoring
21022 Dual Axial Probe Housing Assembly Bently Nevada* Asset Condition Monitoring Description The 21022 Dual Axial Probe Housing Assembly consists of two proximity probes installed in an externally mounted
8mm, 5mm Proximity Probe TM0180 and TM0105 Systems
8mm, 5mm Proximity Probe TM0180 and TM0105 Systems Introduction to proximity probe transducers Proximity probe transducers are used to measure the static and dynamic distance between the target and the
Micro Motion. Series 3000
Installation Manual P/N 3300991, Rev. C November 2003 Micro Motion Series 3000 Installation Manual TM Micro Motion Micro Motion Series 3000 Installation Manual For online technical support, refer to the
Proximity Transducers, Seismic Sensors and Accessories
8mm, 5mm Proximity Probe TM0180 and TM0105 Systems Introduction to proximity probe transducers Proximity probe transducers are used to measure the static and dynamic distance between the target and the
Proximity Probes Seismic Sensors and Accessories
Proximity Probes Seismic Sensors and Accessories kmo turbo GmbH Friedrichstr. 59 88045 Friedrichshafen Germany Phone: +49 7541 95289-0 Fax: +49 7541 95289-20 info@kmo-turbo.de www.kmo-vibro.com SENSOR-CAT-ENG-B-8704-KMO20130601
mm and 8 mm PROXIMITY TRANSDUCER SYSTEM
Part number 86130-01 Revision U, November 1999 3300 5 mm and 8 mm PROXIMITY TRANSDUCER SYSTEM MANUAL 3300 5 mm and 8 mm Proximity Transducer System Copyright 1998 Bently Nevada Corporation All Rights Reserved.
Probe Holder for PR6422 and PR6423
Probe Holder for PR6422 and PR6423 The probe holder permits mounting of eddy current sensors of type PR6422 and PR6423 at machines so that they can be adjusted form outside. The sensors can be changed
3300 XL 8mm Proximity Transducer System
33 XL 8mm Proximity Transducer System Description The 33 XL 8 mm Proximity Transducer System consists of: a 33 XL 8 mm probe a 33 XL extension cable a 33 XL Proximitor Sensor 1 The system provides an output
EFP SERIES FLAMEPROOF ELECTRICAL CONNECTORS FOR HAZARDOUS ENVIRONMENTS
EFP SERIES FLAMEPROOF ELECTRICAL CONNECTORS FOR HAZARDOUS ENVIRONMENTS Table of Contents EFP Introduction 4 Connector Features 5-7 Code Logic 8 Inline Plug w Threaded Entry Metric 9 Inline Plug w Mechanical
Ca-Zoom PTZ Configuration Guide
Ca-Zoom PTZ Configuration Guide System Components Cameras CCU Cables Pendant 2 System Capability Pan, Tilt, and Zoom Cameras Sealed, rugged, capable Image Management System Integrated Design 3 Step 1 Select
Photoelectric Sensors Enhanced 50 Series
June 2008 Contents Overview...................... Model Selection, Sensors......... 2 Model Selection, Compatible Cables.............. 7 Model Selection, Fiber Optic Cables................... 8 Model Selection,
Compact Electric Actuators AC and DC Voltages 18 Nm/160 inch lbs
Compact Electric Actuators AC and DC Voltages 18 Nm/160 inch lbs Features Miniature industrial quality quarter turn (90 ) rotation Excellent power to size ratio only 4.6 H x 3 D Type 4X and IP67 weatherproof
DIGITAL PROXIMITY SYSTEM (DPS) OVERVIEW. Datasheet. The DPS consists of three elements: a Probe, Extension Cable, and Driver or Transmitter.
OVERVIEW The Metrix Digital Proximity System (DPS) combines the performance of a fully API 670 compliant eddy-current proximity measurement system with the flexibility of digital configurability. For the
Cable Glands 757, BVE and 737 Series: Blanking Plugs, Adaptors and Reducers Increased Safety and Flameproof
757 Series Blanking Plugs 737 Series Adaptors and Reducers BVE Series Plastic Blanking Plugs & Sealing Washers Compliance Data: 757 Series Blanking Plugs: ATEX IECEx CE Ex d IIC or Ex e II Ex td A21 IP
3300 XL High Temperature Proximity System
3300 XL High Temperature Proximity System Product Datasheet Bently Nevada* Asset Condition Monitoring Description Gas and steam turbines can produce temperatures hot enough to damage or destroy conventional
Velomitor* CT Velocity Transducer
190501 Velomitor* CT Velocity Transducer Product Datasheet Bently Nevada* Asset Condition Monitoring Description The Velomitor CT Velocity Transducer is a low-frequency version of our standard Velomitor
ER DATALOGGER ER-200. Bluetooth Communication Easy data transfer via wireless bluetooth Wireless range up to 32 ft (10m) No more cables required
ER DATALOGGER ER-200 The ER-200 Electrical Resistance (ER) Datalogger is ideal for use in any process media and remote locations where direct online operation is not possible. With builtin technology,
Metrix DPS 1.35 Software Overview. January 2018
Metrix DPS 1.35 Software Overview January 2018 Metrix DPS 1.35 Main Points Compatibility Metrix MX8030 is completely compatible with BN 3300XL, it is a direct replacement Every MX8030 probe and cable is
DIGITAL PROXIMITY SYSTEM (DPS) OVERVIEW. Datasheet. The DPS consists of three elements: a Probe, Extension Cable, and Driver or Transmitter.
OVERVIEW The Metrix Digital Proximity System (DPS) combines the performance of a fully API 670 compliant eddy-current proximity measurement system with the flexibility of digital configurability. For the
3300 XL 8mm & mm Proximity Transducer System
Installation Manual Bently Nevada* Asset Condition Monitoring 3300 XL 8mm & 3300 5mm Proximity Transducer System Part Number 4078-0 Rev. V (08/5) 3300 XL 8mm & 3300 5mm Proximity Transducer System 999-205
Insertion RTD temperature probe
Data sheet 902350 Page 1/6 For temperatures between -50 and +260 C Steam-tight and pressure-resistant High mechanical strength For use in the food industry Available with multiple measuring points Due
Absolute Encoders Multiturn
The multiturn encoders 6 and 8, with interface and combined optical and magnetic sensor technology, offer a maximum resolution of 5 bits. These encoders are programmable via the Ezturn software. The hollow
Pile Driver Weld Immune Sensors
DC... 190 8, 12, 18, and 30 mm Diameter... 190 3- and 4-Wire DC... 192 8, 12, 18, and 30 mm Diameter... 192 AC/DC... 194 12, 18, and 30 mm Diameter... 194 Pile Driver Sensors P+F s weld immune Pile Driver
Industrial Electric Actuators AC and DC Voltages Nm/ inch lbs
Industrial Electric Actuators AC and DC Voltages 30-200Nm/265-1770 inch lbs Features Quarter turn (90 ) operation with mechanical travel stops Type 4X/IP67 weatherproof aluminum alloy enclosure Highly
Contents. Volume 8 Sensing Solutions CA E April
Inductive Proximity Sensors.9 Product Description These unique Inductive Proximity Sensors by Eaton s electrical sector are designed to be used in extremely small spaces. A wide variety of models are available
ENCODER. Profibus Multiturn. Series , Key-Features:
ENCODER Profibus Multiturn Series 8.5868, 8.5888 Key-Features: Content: Order Code Technical Data Profibus Interface Connection Technical Drawing......3...4...4...5 - Solid shaft: maximum diameter 0 mm
Velomitor * Piezo-velocity Sensor
Velomitor * Piezo-velocity Sensor Bently Nevada* Asset Condition Monitoring Description Velomitor * Piezo-velocity Sensors measure absolute (relative to free space) bearing housing, casing, or structural
Magnetic Field Sensor Magnetic-inductive Proximity Sensor BIM-EG08-Y1X-H1341
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
PROSMART Parts and Services Catalog
Parts and Services Catalog TABLE OF CONTENTS CM s & DM s Communication Module Options 3 Data Monitoring Options 4 Sensors & Cables Vibration/Temperature Sensor Options 5 Mounting Adapter for Vibration/Temperature
Metrix Probe Mounting System PM Oil-tight, with Insulating Connection Head and Gap Adjustment
Metrix Probe Mounting System - 5497PM Oil-tight, with Insulating Connection Head and Gap Adjustment Page 1 of 5 Metrix Reverse Probe Mount Eddy Current probes are used in rotating equipment to monitor
Magnetic Field Sensor Magnetic-inductive Proximity Sensor BIM-M12E-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
Rotary Measurement Technology Absolute Encoders, Multiturn
-40 to 80 C IP Mechanical drive Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection
Sensors and Systems. Short Form. that protect your plant...
Sensors and Systems Short Form that protect your plant... About us What is Hansford Sensors? At Hansford Sensors, we design, develop and manufacture a wide range of high performance industrial accelerometers,
Posi-Lok Plugs and Panels
THE SAFEST ELECTRICAL SYSTEM FOR HIGH AMPERAGE CONNECTIONS, POSI-LOK IS PART OF THE CAM-LOK FAMILY OF CONNECTORS. THE GROUND ALWAYS MAKES FIRST AND BREAKS LAST ALL POSI-LOK SYSTEMS ARE UL LISTED AND CSA
Proximity Vibration / Position / Phase Reference Transmitters
Proximity Vibration / Position / Phase Reference Transmitters Seismic Vibration Transmitters kmo turbo GmbH Friedrichstr. 59 88045 Friedrichshafen Germany Phone: +49 7541 95289-0 Fax: +49 7541 95289-20
Inductive sensor NI3-EG08K-Y1-H1341
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M8 x 1 Stainless steel, 1.4427 SO DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6 (NA- MUR)
Inductive sensor BI1.5-EG08-Y1-H1341
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
Inductive sensor BI5-EM18-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
AC Micro Style Cordsets and Receptacles
AC Micro Style Cordsets and Receptacles Description Rockwell Automation/Allen-Bradley offers a wide variety of connection products for interfacing field devices to I/O, junction boxes, PLCs, etc. Connection
Описание на бесконтактные датчики близости. Модель 3300 XL 8mm
По вопросам продаж и поддержки обращайтесь: btn@nt-rt.ru www.bently.nt-rt.ru Архангельск (8182)63-9-72, Астана+7(7172)727-132, Белгород(4722)43-64, Брянск(4832)59-3-52, Владивосток(423)2498-31, Волгоград(844)278-38,
200150, & Accelerometers Bently Nevada* Asset Condition Monitoring
200150, 200155 & 200157 Accelerometers Bently Nevada* Asset Condition Monitoring Description The 20015x Accelerometers are general purpose, wide frequency, case-mounted seismic transducers designed for
HMT360 Series Intrinsically Safe Humidity and Temperature Transmitters
www.vaisala.com HMT360 Series Intrinsically Safe Humidity and Temperature Transmitters Customers may specify the transmitter configuration when ordering the instrument, however changes in configuration
Data Sheet. Model ER position sensor, features a versatile rod-and-cylinder design with optional dual rod ends. Interrogation Return wire.
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors E-Series Model ER Analog / Digital-Pulse (Start/Stop) Output SENSORS Document Part Number 550996 Revision D Data Sheet Model
Spare Parts for RM71 SmartLine Guided Radar Level Meter
Spare Parts f RM71 SmartLine Guided Radar Level Meter XM71 All but 2mm F 2mm probe style see MSG 36-RM-16-06 (XM72) 36-RM-16U-05 Page 1 of 8 Model Selection Guide Supply the iginal instrument model code
Rotary Measurement Technology Absolute Encoders, Singleturn
-40 to 80 C IP Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable
HMT360 Series Intrinsically Safe Humidity and Temperature Transmitters
www.vaisala.com HMT360 Series Intrinsically Safe Humidity and Temperature Transmitters Customers may specify the transmitter configuration when ordering the instrument, however changes in configuration
RoHS. High shaft load capacity. Shock / vibration resistant
Due to their sturdy bearing construction in Safety-Lock Design, the Sendix 5000 and 5020 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up
Ranger* Pro Wireless Condition Monitoring
Ranger* Pro Wireless Condition Monitoring Datasheet Bently Nevada* Asset Condition Monitoring Product Datasheet The Ranger* Pro Wireless Condition Monitoring wireless vibration sensor allows you to monitor
Universal Compact Extruded Cylinders
Universal Compact Extruded Cylinders Clippard s new Compact, Extruded Body Cylinders are available in double acting, double rod, single acting spring return, and single acting spring extended models. Universally
Approx. 4 s, measured in oil, with a probe Ø of 10 mm made of stainless steel. Influential effect of the ambient temperature
sales@jumo.co.uk info.us@jumo.net Page/6 Dial Thermometer Type 608225 Special features Class Display ranges from -40 C to +600 C Temperature indicator as built-in or add-on device Stainless steel case
Digital Proximity System Software Installation Manual
Digital Proximity System Software Installation Manual Doc# 100961 REV A (February 2018) Table of Contents Purpose...2 How to Download DPS 1.35 Software from the Internet...3 The difference between Simulate
9200, Seismoprobe * Bently Nevada* Asset Condition Monitoring
9200, 74712 Seismoprobe * Bently Nevada* Asset Condition Monitoring Description Bently Nevada Seismoprobe * Velocity Transducer Systems are designed to measure absolute (relative to free space) bearing
Inductive sensor BI1.5-EG08-Y1-H1341
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
Inductive Proximity Sensors E51 Limit Switch Style, Modular
September 2009 1 E51 Modular Limit Switch Style This Rugged Sensor Family Features Modular Components for Versatile Sensing Contents Overview...................... 1 Assembled Sensors............ 2 Sensor
Temperature Switches
ETS 00 Series Temperature Switch for Inline and Tank Mounting Applications Description The ETS 00 is a compact electronic temperature switch with 4-digit digital display. Pressure resistant to 8700 psi,
PCS-200ESB Measuring Chains with LIN-300 Series Signal Conditioner. Front End Installation Manual (P/N: I2A-311)
PCS-200ESB Measuring Chains with LIN-300 Series Signal Conditioner Front End Installation Manual (P/N: 9428-25I2A-311) Applies to measuring chain model #: LIN-304S-6I-0.3/4.3 LIN-306S-6I-0.3/6.3 This manual
Sensors and Systems. Short Form. that protect your plant...
Sensors and Systems Short Form that protect your plant... About Us Who are Hansford Sensors? At Hansford Sensors, we design, develop and manufacture a wide range of high performance industrial accelerometers,
HMG 11. Features. Optional Additional incremental output (TTL / HTL) HMG 11. Technical data - mechanical design. Technical data - electrical ratings
Features Multiturn / SSI / Profibus / CANopen / DeviceNet / PROFINET Optical sensing method Singleturn 1 bit, multiturn 1 bit / 16 bit Blind or through hollow shaft or cone shaft ø16-0 mm Multiturn sensing
Ideal protection for your electrics: häwa cable ducts
Ideal protection for your electrics: häwa cable ducts Well Conceived The häwa group has established itself as an innovative and highly competent supplier to machinery and facility equipment companies in
HMT360 Series Intrinsically Safe Humidity and Temperature Transmitters
HMT360 Series Intrinsically Safe Humidity and Temperature Transmitters For operation in up to Zone 0 / 20 Features Measures humidity and temperature, outputs also dew point, mixing ratio, absolute humidity
9200, Seismoprobe* Velocity Transducers
9200, 74712 Seismoprobe* Velocity Transducers Product Datasheet Bently Nevada* Asset Condition Monitoring Description Bently Nevada* Seismoprobe Velocity Transducer Systems are designed to measure absolute
Photoelectric Sensors
Enhanced 50 Series Sensors NanoView Series Sensors SM Series Sensors.0 Introduction Quick Reference Guide.......................................... 230 Technical Reference............................................
and High Temperature Velomitor * System
330750 and 330752 High Temperature Velomitor * System Product Datasheet Bently Nevada* Asset Condition Monitoring Description The standard 330500 Velomitor* Piezo-velocity Sensor has a limited temperature
Sensor boxes SRBC. Festo core product range Covers 80% of your automation tasks
Sensor boxes SRBC q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
Ringlock is a range of robust circular
Connectors is a range of robust circular connectors for industrial applications. It uses a metal bayonet coupling system for quick and reliable connections and thermoplastic bodies for low installed cost.
Photoelectric Sensors Prism Series
PG.05E..T.E August 007 High Perfmance 8 mm Tubular Senss with a Flexible Isolated Contents Overview...................... Model Selection, Senss......... Model Selection, Compatible Connect Cables..............
9200, Seismoprobe
9200, 74712 Seismoprobe Description Bently Nevada Seismoprobe Velocity Transducer Systems are designed to measure absolute (relative to free space) bearing housing, casing, or structural vibration. The
Rotary Position Technology Incremental Encoders
-40 to 85 C IP Safety-Lock High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Optical sensor
Thread length (overall length) material
Cylindrical Proximity Sensor for Mobile Usage Designed and tested to keep your machines moving IP69k tested and certified for highest water resistance e1 type approval (according to automotive directive
Gas-actuated thermometer Stainless steel version Model 73
Temperature Gas-actuated thermometer Stainless steel version Model 73 WIKA data sheet TM 73.01 for further approvals see page 15 Applications General process instrumentation in the chemical and petrochemical
CombiTemp TFRN/TFRH. Operating instructions. Temperature sensor. Operating Instructions: EN.
EN/2017-04-03 Design and specifications subject to change without notice English page 1 8 Field of application CombiTemp TFRx is a temperature sensor, based on RTD technology, which is designed and produced
Cylindrical Proximity Sensor
Cylindrical Proximity Sensor A New Series of Easy-to-use and Tough Models with a Yellow Indicator New series of TL-X2C1-GE models with improved performance over the previous TL-X-E models. Also, in addition
Photoelectric Sensors
Enhanced 0 Series Sensors NanoView Series Sensors SM Series Sensors.0 Introduction Quick Reference Guide.................................... Technical Reference....................................... Product
Rotary Measuring Technology Absolute encoders, Multiturn, DeviceNet
High IP High shaft load capacity Shock/vibration resistant Short-circuit proof Reverse polarity protection Compact and Rugged: Minimal installation depth High shock and vibration values Very compact (only
Ceiling Microphone Array INSTALLATION MANUAL. VoIPon Tel: +44 (0) Fax: +44 (0)
Ceiling Microphone Array INSTALLATION MANUAL Table of Contents INTRODUCTION... 1 Product Overview...1 Device Application...1 INSTALLATION... 2 Physical Characteristics...2 Microphone Array Dimensions
Flow Measurement SITRANS F M
Overview Mode of operation The flow measuring principle is based on araday s law of electromagnetic induction according to which the sensor converts the flow into an electrical voltage proportional to
Phone: Fax: For calls outside the US please call:
SM320 Phone: 1-800-757-3747 Fax: 1-800-676-0498 Email: dicksoncsr@dicksondata.com For calls outside the US please call: 1-630-543-3747 Display Temperature Data Logger Specifications Alarm Type: Audio/Visual
4-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT
4-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT Y1 1710 2690 1710 2690 0 10 0 10 set by hand or by optional RCU (Remote Control Unit) X Y2 X 65 65 4-Port Antenna 1710 2690/1710
Float Switches with Permanent Magnet For Vertical Installation Model RSM
Level Measurement Float Switches with Permanent Magnet For Vertical Installation Model RSM WIKA Data Sheet LM 30.01 Applications Level measurement for almost all liquid media Pump/level control and monitoring