Centre, Left or Right Yes. * Yes - constructed from Basswood * Yes - constructed from Basswood

Transcription

1 ISSUE: SH Introduction Window treatments traditional European styled are the perfect interior window management system. look like our Basswood shutters but offer a longer life span and more affordable price tag. PVC shutters will not absorb moisture, delaminate, split, crack and are excellent for kitchens and bathrooms where moisture may be a problem. may be used for a variety of reasons: visibility and airflow, controlling the amount of sunlight that enters a room, provide privacy and security and enhance the aesthetics of a building or terrace access adding to the practicality and mood of any interior. can either be fixed permanently in place, hinged, bi-fold or sliding depending on your preference and application. Louvres can be adjustable or fixed within the shutter frame. Full height shutters are made with a horizontal divider (mid-rail) which separates the upper and lower portions of the shutter. With operable louvre shutters this gives greater control as the louvres above the mid-rail can be operated independently from the louvres below the mid-rail. A tilt bar is used for adjusting louvre position and to keep louvres in uniform position. Alternatively a clear view metal tilt rod is placed on the reverse side of the shutter allowing you to adjust all louvres position by tilting one louvre. This also allows for cleaner lines on the front of the shutter and helps to decrease light gap measurements on sliding shutter applications. Quick Glance PVC Louvres Louvre Size 64mm, 89mm, 1 Tilt Bar Style Stile Options Hardware Frame Options Finish Tilt Bar Position Clear Hinged Bi-fold Straight Sliding Fixed Louvres (ventilated) Fixed Louvres (non-ventilated) Special Shape Shutters Square Rabbet D-mould Tracking Systems Hardware Stiles Mid-rail Light Stop Hang Strips L Frames Z Frames T Post U Channel Corner Post Bay Window Post Stained Oiled Lacquered Powder coated Centre, Left or Right No * - constructed from Basswood * - constructed from Basswood * - constructed from Basswood * - constructed from Basswood * - constructed from Basswood No No No, Standard colours or custom colours No Page: 31

2 Page : 32 - Tilt Rod, Louvre Size, Louvre Style, Tilt Rod Control Position: Plantation Standard position for the tilt bar control on Plantation shutters is centred within the frame. Alternatively, the tilt bar can be positioned off-centred left or right. The off-centred option is mainly used for bi-fold panels to allow the panels to fold onto each other without hitting the tilt bar. A tilt rod (in conjunction with a hooked push pole) is also used for high/out of reach and special shaped shutters. Clear The Clear control option for PVC shutters is a metal tilt rod rebated into the side of the louvre blade on the reverse side of the panel. This allows for cleaner lines and a clear view through the shutter once the louvres are opened or closed. The standard Clear tilt bar position is on the hinged stile side of the louvre blades. The Clear option is also used for sliding shutter applications as this decreases light gap measurements and allows each shutter panel to sit closer to one another reducing the depth of the shutters when stacked. Louvre Size and PVC There shutters are 2 special are available points here in three sizes of areofoil blade which is elliptical in shape (i.e. thicker in the middle and tapered to the front and back). Louvre blades are reinforced with aluminium inserts. A. Square Stiles B. Rabbet Stiles C. D-mould Stiles PVC Louvre Widths: 64mm Louvre Style for Special Shape Shutters Special shapes are not available in PVC shutters. Please refer to our Basswood and Ceadr Shutter sections if special There are shapes 2 special are points required. here Stiles Square Stiles (Bead) Square & Rabbet Stiles Clear A. Square S tiles B. Rabbet S tiles C. D-mould Stiles 89mm 1 Plantation Window Treatments supplies three stile options for PVC shutters: Square, Rabbet and D-mould. D-mould stiles are used to provide a light block where two panels overlap or interlock. PVC stiles are reinforced with aluminium inserts. A. Square A. Square S tiles S tiles B. Rabbet B. Rabbet S tiles S tiles C. D-mould C. D-mould Stiles Stiles PVC Square Stile (Bead) PVC Rabbet Stile PVC D-mould Stile There There are 2 are special 2 special points points here here Square & D-mould ISSUE: SH

3 40mm 40mm ISSUE: SH Light stop, L frames, T frames & Mount types Light Stop Shutter Frame Options Benefit PVC Light Stop A4, A9, mm Varies Note: constructed from Basswood not PVC L Frame Provides a light block where panels are hinged. Shutter Frame Options Benefit PVC L Frame Beaded (standard - PVC) or Flat (constructed from Basswood) T Post Shutter Frame Options Benefit PVC T Post Beaded (standard - PVC) or Flat (constructed from Basswood) A4 T Posts are used to provide hanging options for single and multiple panels for outside and B8 B3 B3-2 B mm A9 9mm L Frames are used to provide hanging options for single and multiple panels for outside and 4 inside mount applications using a Butt or Steadman hinge. Using a Beaded standard frame or Flat frame 4 56mm with a Steadman hinge allows you to Flat (constructed from protrude the panel past the window B12 B13 Basswood) opening. This gives you the ability to D2 hang the shutter panel square in the frame and closes the light gap for flush mounted hinges. Ideal when there is no architrave in the opening. 69mm 69mm 4 inside mount applications using a Butt hinge. Gives you Wthe ability I N D O W T to hang the shutter panel square in the frame. The T Post closes ROYAL the ASSOCIATES LIMITED Flat (constructed from light gap for flush mounted hinges. REGISTERED Basswood) ARCHITECTS Ideal when there is no architrave atelier- in 62 AVONSIDE DRIVE, CHRISTCHURCH, NEW ZEALAND the opening. 2 options Beaded TELEPHONE: or FACSMILIE: Flat. E -MAIL:r oyal. architects@ xtra. c o. n z 3 B9 6 B mm 17mm B1 B1-1 B2-1 B3-1 Beaded (standard - PVC) T1-1 T2-1 Beaded (standard - PVC) B10 B4 4 C1 C2 Page: 33 T3-1 3 B mm CO-PO

4 Page : 34 - Z Frame, U Channel, Corner Post, Bay Window Post & Mount types Z Frame Shutter Frame Options Benefit PVC Z Frame TP Plain TP Colonial TP Fancy TP Texas U Channel Shutter Frame Options Benefit PVC U Channel Top, Bottom Top and bottom U Channels are ideal for incline roof applications or when access to windows is not required. The louvres can open and close and the panel can easily be removed by lifting the shutter up into the top channel and out at the bottom. To refit the reverse applies. Note: U Channels are constructed from Basswood not PVC Corner Post Shutter Frame Options Benefit PVC Corner Post Corner Post Corner Posts are used to provide hanging options for single and multiple panels within a corner application. Closes light gap for flush mounted hinges. Corner Posts are manufactured according to the size required for each installation. Note: Corner posts are constructed from Basswood not PVC Bay Window Post All measurements vary depending on application Shutter Frame Options Benefit Aluminium Bay Window Post Bay Window Post Z Frames are used to provide hanging options for single and multiple panels within an opening. Plumbing the window frame closes the light gap for flush mounted hinges. The Z frame wraps around the reveal edge, making it ideal for covering out-of-square windows. 4 style options are available Bay Corner Posts are used to provide hanging options for single and multiple panels within a bay window application. Closes light gap for flush mounted hinges. Bay Window Posts are manufactured according to the size required for each installation. Note: Bay window posts are constructed from Basswood not PVC All measurements vary depending on application Top Bottom ISSUE: SH

5 ISSUE: SH Panel types - Hinged, L Frame & T Post Hinged Panel s Panel s refers to the variations of each type of shutter: single panel fixed, single panel hinged, bi-folds, L Frame and T Post, straight sliding and bi-fold track variations. The type of hinge used for a single panel, bi-fold, L Frame and T Post and for Rabbet stiles applications is a Butt hinge. However, if you require your panel to protrude past the window opening, a Steadman hinge is required hinged from a hang strip. Hinged fixed hinged at left hinged at right Set of single panels hinged left and right Single bi-fold shutter pivoted at left Single bi-fold shutter pivoted at right 41mm Steadman Hinge Two sets bi-fold shutters 1-A 1-B 2-A 2-B 2-C 2-D 41mm 2 76mm 33mm 46mm 7 Butt Hinge L Frame and T Post Hinged options When tracks are not feasible, L frame and T Posts are used to provide options for single and mutliple panels within an opening or outside the opening window (see examples below). T L T T L L & T Post Hinged on 6-B Page: 35

6 - Panel types - Hinged, L Frame & T Post Hinged - Contd. L Frame and T Post Hinged - cont. Key T means L means means means Panel is hinged from a T Post or closes onto a T Post Panel is hinged from a L Frame or closes onto a L Frame Panel direction to the right Panel direction to the left Page : 36 ISSUE: SH

7 ISSUE: SH Fixed Louvre Shutters, Overview specifications Fixed Shutters Fixed louvres are permanently open (ventilated - A) or permanently shut (non-ventilated - D). Permanently open means that there is always ventilation while blocking line of sight. Fixed louvres may be employed for a variety of reasons: to control the amount of sunlight that enters a room, to provide privacy and security, protect against weather, unwanted intrusion or damage and to enhance the aesthetics of a building. A D Stile (PVC) Louvres (PVC) Angles Louvre Facing Projection (PVC) Finish (PVC) A-1 51 x 27mm 64, 89, 1 45 or 60 8, 17, 27mm A A-2 51 x 27mm 64, 89, 1 45 or 60 2, 9, 17mm A-1 64mm 89mm 1 Interior 27mm D-1 51 x 27mm 64, 89, mm Exterior 45 or 60 27mm 42mm 80mm Interior Overview PVC Shutter Specifications: Louvre Size Louvre - Aerofoil Finish Width & Height Hinged Maximum Width Maximum Width Minimum Width Minimum Height Maximum Height Track Systems Maximum Width Maximum Height Size 64mm x 89mm x 1 x A-2 D 64mm 89mm 1 27mm D-2 51 x 27mm 64, 89, mm 9mm 17mm Exterior Options Half Open, Fixed, Ventilated, Fixed Non-Ventilated 51mm 73mm 9 Interior Colours Standard colours: White, Snow, Swiss coffee, Creamy, Butter, Super white, Pearl white, Eggshell, Pearl, Bristle half, Antique white, White on white or Custom Colour Size 7 (Single Panel) 500mm (Bi-fold Panel) 300mm (Single Panel) 300mm 2400mm Note: Shutters over 1500mm in height will be constructed with a mid-rail Stile & Rails Stile Top Rail Mid Rail Bottom Rail Tilt Mechanism Multi-fold 500mm per Panel (maximum 8 x Panels on each side) 2400mm Note: Shutters over 1500mm in height will be constructed with a mid-rail Size x Recess D mm 89mm 27mm Size 80mm mm 80mm 100mm Exterior 70mm - 1 x (, depends on height of panel) 82.6mm x Shutters over 1500mm 1 mid-rail 70mm - 1 x (, depends on height of panel) Tilt Rod 15. x 12. Clear view concealed Interior D-2 64mm 89mm 1 27mm 53mm 80mm 100mm Exterior Please Note: Varies, depends on Louvre size. Options Square D-mould Tilt Rod (centered, left, right) Clear Single Run 900mm per Panel (maximum 6 x Panels on each track) 2400mm Note: Shutters over 1500mm in height will be constructed with a mid-rail Page: 37

8 . single run 60 - HardwareMultifold Technical - Tracking systems, Hinges 25 For top hung straight sliding doors. Max 60kg each. Suitable for residential and light commercial folding partitions To cover any width of opening, any number of doors can be used Leaves can be either end folding or centre folding Leaves can fold to one or both sides of the opening To accommodate different building designs, doors can slide to one or both sides Pivot hardware enables an end folding internal partition to be designed using standard width door leaves with no need to reduce the width of the leaf adjacent to the Hinged door for easy access may bejamb incorporated into a sliding door Tracking Systems DOOR SPECIFICATION Where doors are fitted externally, a canopy is recommended Track System: 25 Window Treatments supplies twomultifold tracking systems: MultiFor Individual Leaves: DOOr specification Max Leafand Height Single 2400mm fold for bi-fold shutters, Run for straight sliding Track Single Run 60 Max leaf Weight 25kg System: Max Leaf Width 6 For Individual Doors: shutters. For special applications Window Treatments can Min Leaf Thickness MaxWhite Doorlogo Height 2400mm The folding unit is not hinged to a jamb, but pivoted in the track and on the adjustable MaxofDoor Weight 60kg supply various track options to suit your jamb bracket. End folding units two, four, six requirements. or eight leaves can be pivoted to each Steadman Hinge 2 36mm 46mm 7 41mm 76mm Stainless Steel No. A60SSS Hanger Stainless Steel stainless steel 1GN Saw CutNo. A901A Channel 63mm Guides: No. A902A Channel no. A1gn guide This nylon Guide is designed to slide through a deep x wide saw cut opening in the overlap area. Barrel Bolt Spanner: m 12 A8G/901 Spring loaded Magnetic Catch Set of single panels hinged left and right 2-A ISSUE 1 Single bi-fold shutter 4 Single bi-fold shutter pivoted at left pivotedat right 2-B 2-C fixed Medium Ball Stops Two sets bi-fold shutters hinged at right hinged at left 1-A 2-Dof single panels Set hinged left and right 1-B Magnetic Catch 3 no. A901A Channel Magnetic Catch 14 52mm No. A902A Channel Spring loaded Guide, nylon body and tip with stainless steel shaft and spring. Designed to slide in the 901 Channel and 902 threshold Channel 2 9mm No. A8G/901 A901A A902A Guide: 8 DATA SHEET D40 Stainless Steel Accessories: Channels: 7mm ISSUE 1 A60sP Pressed steel zinc plated DATA SHEET B80 m 13mm Single bi-fold shutter Single bi-fold shutter 1pivotedat right pivoted at left 2-A 2-B Two sets bi-fold shutters 2-C 2-D Ball Stop 2 2 9mm 9mm 13mm 13mm 4 4 Ball Stops MediumMedium Ball Stops Magnetic Magnetic Catch Catch 100mm Large Ball Stops Large Ball Stops N D O W T 2 ROYAL ASSOCIATES LIMITED R E A A T E : 3 Friday, 30 November 1 ISSUE: SH T4-1 B T3-1 40mm 67mm Securing Bi-fold Panel T3-1 T2-1 4 Securing Fixed Panel 40mm 69mm 4B10-11:5 Bi-fold, Sliding, Panel 4 Brown, White, Black m Brass, Chrome 67mm 3 Stainless Steel 1 Barrel Bolt6 B8Steel E -M A I L :r o y a l. ab9 A Stainless r c h i t e c t x t r aassists. c opanel. n z movement B10 E n o ~ Hardware FACSMILIE: Handle Hinge M S H T 4 100mm 36mm TELEPHONE: mm4 E G I SWhite, T E Black, R E Antique D A R CHang H IStrip, T Eprotruding C T S past window 2012 opening Stainless Steel, R Silver, Cream, B10-1 S C A L E S : atelier- 62 AVONSIDE DRIVE, CHRISTCHURCH, NEW ZEALAND Brass, Bright B10Brass 36mm B9 Steadman Hinge L Frame D 0mm Hinge T4-1 I Suitable for 3 Stainless Steel, Silver, Cream, White, Black, Antique Square, Rabbet, T Post, 3 3 Brass, Bright2 Brass Colours Available 3 0mm W 3 Magnetic Catch S Steadman ButtGuide Hinge in thehinge bottom rail of the door. The is fitted on the floor at the edge of the 3 no. A60sP spanner No. 60SN Hanger 76mm 8 46mm 7 Butt Hinge Ball Stops 76mm and (2 3600mm Hangers per door): A401 stainless body and precision bearings. Nylon tyre wheel hangers should not be used on installations involving temperatures exceeding 80 C. T1-1 Stainless Steel Bracket made from zinc plated steel. Supplied with matching fasteners. A901A aluminium channel, available in 1200, 1500, 1800, mm 63mm Sec. : Shutters 69mm Page : 38 no. A60Ds stop Stainless Steel 6 (supplied in sets and packs) No. ADP1/60 Bracket 63mm Hinge No. A8G/901 No. A60SN Hanger Threshold: AllA902A hangers have nylon tyre wheels and are fitted with ball race bearings. The 60SN A902A threshold, aluminium, available in 2100, 3000,body 4000 and Hanger has a nylon and6000mm chrome precision bearings. The 60SSS hanger has a B8 S Flush Bolt with flat shoot: A360 Butt No. A75x47FHSS Steel, in zinc dichromate finish Guide: A8G/901 interior A60sn Spring loaded guide for use with 901A or 902A channels. Guide is nylon and stainless exterior A60sss steel. Flush Pull with deep grip: 4 3 S No. A60SNS Hanger Handle Hinge 41mmPack of 5 Brackets A1/60/5 Accessories: Bracket: ADP1/60 Bracket made from steel and supplied matching fasteners. Available in a pack of 5 or Pack of 8with Brackets A1/60/8 8, reference 1/60/5 and 1/60/8 respectively. 33mm 2 Brackets: A60SP Spanner: Channels: 36mm Pivot Hanger: A60SN Track: A60A The hanger is fitted with four nylon tyred ballrace wheels. The adjustment bolt is Material Aluminium attached to the top plate and secured in place with a locking clip which allows easy Standard lengths 2000mm, 3000mm, 4000mm and 6000mm installation. All steel parts are zinc dichromated. 33mm 17mm Large Ball Stops Single Run for straight sliding Hinges: A75X47FHSS track available Stainless steel mortise hingeanodised. Aluminium innon mill or clear Screws for the hinges are stainless steel. The other screws are in zinc dichromate finish. 2 1-B 4 door pack 6 door pack S hinged at right 1-A Multi-fold forwell BiMetal doors should be constructed of box section, channel or angle framing, Contents 2 door pack braced and clad with flat or corrugated sheets. fold shutters standard set Hinges HARDWARE SPECIFICATION Set comprises hangers, door stops, nylon guide, screws and instructions. Track punched for Depending on the type of shutter installation, Butt Hinge and Steadman Hinge are the standard hinges. For White logo Pack APD60 soffit fitting: A60ASet No Material Aluminium special applications,standard Window Treatments also supplies various hinge options such asno.handle hinges to suit The APD60 is a pack of fittings only without track. lengths 2000mm, 3000mm, 4000mm and 6000mm A1/60 Bracket Pivot Assembly: AMF25TP Steel, Zinc dichromated, Nylon your requirements. Top HARDWARE SPECIFICATION AMF25TP Top Pivot AMF25BP Bottom Bottom Pivot: AMF25BP Steel, Zinc dichromated, Nylon hinged at left 2 100mm industrial applications should be framed, ledged and braced. Set No. AMf2 White logo AMf4 AMf6 41mm 76mm fixed 2 STANDARD SETS AND PACKS 41mm 13mm 19-4 side of the opening. CentreDoor foldingthickness units of one, three, five or seven full width leaves and one half width leaf can be pivoted to each side of the opening. A guide system across Forfolding ease units of operation itorismore recommended that the door width should not exceed 75% the floor must be used on end of four leaves in excess of 4 of door wide or 15kg per leaf. Instructions on height. leaf width calculation is shown overleaf. Door leaves should be constructed to provide secure fitting for the pivots, hangers, hinges and Timber doors for interior use can be of flush construction or glazed. Timber doors for guides and can be either flush, panelled or of louvre construction. Butt Hinge Steadman Hinge White logo 2 Magnetic Catch Widely used in lighter commercial and industrial applications APPliCAtioN m SPECIFICATIONS Hardware Overview 4 Medium Ball Stops Large Ball Stops APPliCATiOn 4 3 for top hung interior folding partitions. Max 25kg each leaf. 2 9mm 13mm

9 - Hardware Technical - Sliding Single Run Application Widely used in lighter commercial and industrial applications To cover any width of opening, any number of panels can be used To accommodate different building designs, panels can slide to one or both sides Hinged panel for easy access may be incorporated into a sliding panel Where panels are fitted externally, a canopy is recommended Panel Specification Track System: Single Run (individual Panels) Max Panel Height: 2400mm For ease of operation it is recommended that the panel width should not exceed 75% of the panel height. Panels for interior use can be of flush construction or glazed. Panels for industrial applications should be framed, ledged and braced. Hardware Specification Track : 80A Material : Aluminium Standard lengths : 2000mm, 3000mm, 4000mm, 6000mm Aluminium track available in mill or clear anodised finish. Door Stop : 20DS (Stainless Steel) Hangers (2 per door) : Interior : No. 57EN Hamger Hangers supplied with fixing plate and nylon tyred precision bearings. Vertical adjustment is simple and positive. Nylon tyre wheel hangers should not be used on installation involving temperatures exceeding 80 0 C. Guide : No. 801S Spring loaded guide, nylon body and tip with stainless steel shaft and spring. Designed to slide in the No. 92 Threshold ISSUE: SH Page: 39

10 - Hardware Technical - Multi-fold Application Suitable for residential and light commercial folding shutters with all panels of equal width. Panels can fold to one or both sides of the opening Pivot hardware enables a folding exterior shutter to be designed using equal width panels with no cutting down of the panel adjacent to the post. To cover any width opening, any number of folding untits can be used. Panel Specification Track System: Multi-fold (individual leaves) Max Leaf Height: 2400mm Max Leaf Width: 500mm Units of up to six panels can be pivoted to each side of the opening. A guide system across the floor must be used on units of three panels or more. Floating units consist of four to six panels. Shutters should be constructed to provide secure fitting for the pivot sets, hangers, hinges and guides. Hardware Specification Track - punched for soffit fitting: 80A Material : Aluminium Standard lengths : 2000mm, 3000mm, 4000mm, 6000mm Top Pivot Assembly Bottom Pivot Door Stop : 21EPNC Steel, Zinc dichromated, Nylon : 21EPNC Steel, Zinc dichromated, Nylon : 20DS (Stainless Steel) Hangers : No. 57EN Hanger The hanger is fitted with four nylon tyred ballrace wheels. The adjustment bolt is attached to the top plate and secured in place with a blocking clip which allows easy installation. All steel parts are zinc dichromated. Guide : No. 801S Spring loaded guide for use with No.92 Threshold. Guide is nylon and stainless steel. Threshold : No. 92 Threshold, aluminium, available in 2100mm, 3000mm, 4000mm, 6000mm No.21EPNC Top Pivot No. ADP1/60 Bracket Page : 40 ISSUE: SH