SPECIFICATIONS. Aluminium Shutters

Size: px

Start display at page:

Download "SPECIFICATIONS. Aluminium Shutters"

Corey Woods
5 years ago
Views:

ISSUE: SH-12-003 Introduction Window reatent s traditional European styled Aluiniu shutters are an aesthetically pleasing and versatile window anageent syste suitable for both interior and exterior

1 ISSUE: SH Introduction Window reatent s traditional European styled Aluiniu shutters are an aesthetically pleasing and versatile window anageent syste suitable for both interior and exterior applications. he hardwearing powder coated aluiniui s available in four baked enael colours; silver, satin black, pearl white and new birch. Aluiniu shutters ay be used for a variety of reasons: visibility and airflow, controlling the aount of sunlight that enters a roo, privacy, security and the ability to enhance the aesthetics of a building or terrace access adding to practicality and ood of any interior or exterior area. hey can be either fixed peranently in place, hinged, bi-fold or sliding depending on your preference and application. ouvres can be adjustable or fixed within the shutter frae. Full height shutters are ade with a id-rail which separates the upper and lower portions of the shutter, with operable louvre shutters this gives greater control as the louvres above the id-rail can be operated independently fro the louvres below the idrail. A clear view etal tilt rod is used placed on the reverse side of the shutter allowing you to adjust all louvres at once by siply tilting one louvre on the front side of the shutter. he clear view echanis provides cleaner lines, perserves the view and helps to decrease light gap easureents on sliding shutter applications. te that a front ounted tilt bar can not be used on our aluiniu shutters. Quick Glance ouvres ouvre Size ilt Bar Style Stile Options Hardware Frae Options Finish ilt Bar Position Clear Hinged Bi-fold Straight Sliding Fixed ouvres (ventilated) Fixed ouvres (non-ventilated) Special Shape Shutters Square Rabbet D-ould racking Systes Hardware Stiles Mid-rail ight Stop Hang Strips Fraes Z Fraes Post U Channel Corner Post Bay Window Post Stained Oiled acquered Painted Powder coated Aluiniu N/A * - constructed fro Basswood * - constructed fro Basswood * - constructed fro Basswood Page: 21

- ilt Rod, ouvre Size, ouvre Style, ilt Rod Control Position: Clear he Clear control for Aluiniu shutters is a etal tilt rod rebated into the side of the louvre blade on the reverse side of the panel.

2 - ilt Rod, ouvre Size, ouvre Style, ilt Rod Control Position: Clear he Clear control for Aluiniu shutters is a etal tilt rod rebated into the side of the louvre blade on the reverse side of the panel. his allows for cleaner lines and a clear view through the shutter once the louvres are opened or closed. he standard Clear tilt bar position is on the hinged stile side of the louvre blades. Aluiniu shutters that are installed in hard to reach places will coe with a hooked pole and have a sall eyelet screwed into the botto louvre which allows the louvres to be repositioned easily using the pole provided. he Clear echanisi when used in sliding shutter applications decreases the light gap easureents and allows each shutter panel to sit closer to one another reducing the depth of the shutters when stacked. Size hickness Aluiniu Aerofoil x 1.4 here are 2 special points here Clear A. Square Stiles B. Rabbet Stiles C. D-ould Stiles CA ouvre Size and Aluiniu shutters are available in an areofoil blade which is elliptical in shape (i.e. thicker in the iddle and tapered to the front and back). ouvre Style for Special Shape Shutters A. Square Stiles B. Rabbet Stiles C. D-ould Stiles here are 2 special points here Special shapes are not available in Aluiniu shutters. Please refer to our Basswood and Ceadr Shutter sections if special shapes are required. Stiles Window reatents supplies 2 stile options for Aluiniu shutters: Square, and D-ould. D-ould stiles are used to provide a light block where two panels overlap or interlock. Square Stile A. Square Stiles B. Rabbet Stiles C. D-ould Stiles Aluiniu Square Stile Square stile 60.2 here are 2 special points here Square & D-ould 30.1 Aluiniu D-ould Stile Page : 22 ISSUE: SH

3 ISSUE: SH ight stop, fraes, B22 fraes & Mount types C1 ight Stop Shutter Frae Options Benefit Aluiniu ight Stop Varies A4 Provides A7a light block A9 where panels are hinged. te: constructed fro Basswood Frae B8 Shutter Frae Options Benefit Aluiniu Post Standard Post are used to provide hanging options for single and ultiple panels for outside and inside ount applications using a Butt hinge. Gives you the ability to hang the shutter panel square in the frae. he ROYA Post closes ASSOCIAES the light gap for flush ounted IMIED REGISERED hinges. Ideal when there is ARCHIECS no architrave in atelier- the 62 opening. AVONSIDE Available DRIVE, as Standard. CHRISCHURCH, NEW ZEAAND EEPHONE: FACSMIIE: E -MAI:r oyal. architects@ xtra. c o. n z 3 15 B3 B3-2 B4 B4-2 B B9 Aluiniu Frae Standard Fraes are used to provide hanging 67 options for single and ultiple panels for outside and inside ount applications using 56 a Butt or Steadan hinge. Using a standard (\J ('") frae with a Steadan hinge allows you to protrude the panel past the window 15.6 II) opening. B12 his gives you the B13ability to hang D2 D3 the shutter panel square in the frae and closes light gap for flush ounted hinges. Ideal when there is no architrave in the opening Post Shutter Frae Options Benefit B10 varies 15 W I N D O W R E A M E 3 45 varies varies 4 3 B10-1 varies varies D A E : S H n o ~ : Sunday, 25 veber Frae Optio 2012 S C A E S : A 4 B1 B1-1 B2-1 B3-1 B CO-PO 1:3 B23 C1-1 C V1 C Page: C5 C4 30 C3 B.0

- U Channel, Corner Post, Bay Window Post & Mount types, Panel s U Channel Shutter Frae Options Benefit Aluiniu U Channel op, Botto op and botto U Channels are ideal for incline roof applications or

Closes light gap for flush ounted hinges. Corner Posts are anufactured according to the size required for each installation.

4 - U Channel, Corner Post, Bay Window Post & Mount types, Panel s U Channel Shutter Frae Options Benefit Aluiniu U Channel op, Botto op and botto U Channels are ideal for incline roof applications or when access to windows is not required. he louvres can open and close and the panel can easily be reoved by lifting the shutter up into the top channel and out at the botto. o refit the reverse applies. Corner Post Shutter Frae Options Benefit Aluiniu Corner Post Corner Post Corner Posts are used to provide hanging options for single and ultiple panels within a corner application. Closes light gap for flush ounted hinges. Corner Posts are anufactured according to the size required for each installation. te: constructed fro Basswood Bay Window Post Shutter Frae Options Benefit Aluiniu Bay Window Post Bay Window Post 24 3 Bay Corner Posts are used to provide hanging options for single and ultiple panels within a bay window application. Closes light gap for flush ounted hinges. Bay Window Posts are anufactured according to the size required for each installation. te: constructed fro Basswood Panel s & Hinging Options Panel types refers to the variations of each type of shutter; single panel fixed, single panels hinged, bi-folds, Frae, Post, Straight sliding, and bi-foldog variations. he type of hinge used for a single panel, bi-fold, frae and post applications is a butt hinge. However if you require your panel to protrude past the window opening then a Steadan hinge is required hinged fro a hang strap Can be custo ade to suit Steadan Hinge 76 6 op U Channel Botto U Channel Butt Hinge Page : 24 fixed hinged at left hinged at right Set of single panels hinged left and right Single bi-fold shutter pivoted at left Single bi-fold shutter pivoted at right wo sets bi-fold shutters 1-A 1-B 2-A 2-B 2-C 2-D ISSUE: SH

5 ISSUE: SH Panel s & Hinging options contd. Frae and Post Hinged options When tracks are not feasible, frae and Posts are used to provide options for single and utliple panels within an opening or outside the opening window (see exaples below). & Post Hinged One Panel variations: Key eans eans wo Panel individually hinged & wo Panel bi-fold variations: eans eans hree Panel individually hinged variations: hree Panel bi-fold variations: Four Panel individually hinged variations: Four Panel bi-fold variations: Panel is hinged fro a Post or closes onto a Post Panel is hinged fro a Frae or closes onto a Frae Panel direction to the right Panel direction to the left Six Panel individually hinged variations: Six Panel bi-fold variations: Page: 25

6 Page : 26 - Fixed ouvre Shutters, Overview specifications Fixed Shutters Fixed louvres are peranently open (ventilated - A) or peranently shut (non-ventilated - D). Peranently open eans that there is always ventilation while blocking line of sight. Fixed louvres ay be eployed for a variety of reasons: to control the aount of sunlight that enters a roo, to provide privacy and security, protect against weather, unwanted intrusion or daage and to enhance the aesthetics of a building. Interior ral A-1 Stile (Aluiniu) ouvres (Aluiniu) Angles ouvre Facing Projection (Aluiniu) Finish (Aluiniu) A 5 17 Exterior Interior A-2 ral A-1 60 x 45 or 60 ral 17 Powder coated 5 73 Exterior A A-2 60 x 45 or 60 Powder coated Interior ral D-1 60 x 85 ral ral D-1 Powder coated D 80 Exterior Overview Aluiniu Shutter Specifications: ouvre Size ouvre - Aerofoil Width & Height Hinged Maxiu Width Maxiu Width Miniu Width Miniu Height Maxiu Height Finish Powder Coated Recess Size 122 rack Systes Maxiu Width Maxiu Height Size x Size 1100 (Single Panel) 700 (Bi-fold Panel) 300 (Single Panel) Interior D D-2 60 x 85 D-2 Powder coated Options Half Open, Fixed, Ventilated, Fixed n-ventilated te: Shutters over 1800 in height will be constructed with a id-rail Colours Silver, Satin black, Pearl white, New birch ouvre size Stile & Rails Stile op Rail Mid Rail Botto Rail ilt Rod Multi-fold 700 per Panel (axiu 8 x Panels on each side) 2700 te: Shutters over 1800 in height will be constructed with a id-rail Size x 80 Exterior x 78.6 x 81.6 Shutters over id-rail x (varies, depends on height of panel) Rebated on reverse side of panel Options Square D-ould Clear only Single Run 1200 per Panel (axiu 6 x Panels on each track) 2700 te: Shutters over 1800 in height will be constructed with a G id-rail ISSUE: SH

. single run 60 - HardwareMultifold echnical - racking systes, Hinges 25 racking Systes DOOR SPECIFICAION Where doors are fitted externally, a canopy is recoended rack Syste: 25 Window reatents

Weight 25kg Syste: Max eaf Width 6 For Individual Doors: shutters.

60kg supply various track options to suit your jab bracket. End folding units two, four, six requireents.

or angle fraing, Contents 2 door pack braced and clad with flat or corrugated sheets. fold shutters 100 industrial applications should be fraed, ledged and braced. Set.

A guide syste across Forfolding ease units of operation itorisore recoended that the door width should not exceed 75% the floor ust be used on end of four leaves in excess of 4 of door wide or 15kg

Door leaves should be constructed to provide secure fitting for the pivots, hangers, hinges and iber doors for interior use can be of flush construction or glazed.

SANDARD SES AND PACKS S 36 sandard se Hinges HARDWARE SPECIFICAION Set coprises hangers, door stops, nylon guide, screws and instructions.

Handle hinges to suit A1/60 Bracket op Pivot Assebly: AMF25P Steel, Zinc dichroated, Nylon HARDWARE SPECIFICAION AMF25P op Pivot AMF25BP Botto your requireents.

7 . single run 60 - HardwareMultifold echnical - racking systes, Hinges 25 racking Systes DOOR SPECIFICAION Where doors are fitted externally, a canopy is recoended rack Syste: 25 Window reatents supplies twomultifold tracking systes: MultiFor Individual eaves: DOOr specificaion Max eafand Height Single 2400 fold for bi-fold shutters, Run for straight sliding rack Single Run 60 Max leaf Weight 25kg Syste: Max eaf Width 6 For Individual Doors: shutters. For special applications Window reatents can Min eaf hickness White logo Max Door Height 2400 he folding unit is not hinged to a jab, but pivoted in the track and on the adjustable MaxofDoor Weight 60kg supply various track options to suit your jab bracket. End folding units two, four, six requireents. or eight leaves can be pivoted to each Magnetic Catch White logo Single Run for straight sliding 4 door pack 6 door pack Multi-fold forwell BiMetal doors should be constructed of box section, channel or angle fraing, Contents 2 door pack braced and clad with flat or corrugated sheets. fold shutters 100 industrial applications should be fraed, ledged and braced. Set. AMf2 White logo AMf4 AMf side of the opening. CentreDoor foldinghickness units of one, three, five or seven full width leaves and one half width leaf can be pivoted to each side of the opening. A guide syste across Forfolding ease units of operation itorisore recoended that the door width should not exceed 75% the floor ust be used on end of four leaves in excess of 4 of door wide or 15kg per leaf. Instructions on height. leaf width calculation is shown overleaf. Door leaves should be constructed to provide secure fitting for the pivots, hangers, hinges and iber doors for interior use can be of flush construction or glazed. iber doors for guides and can be either flush, panelled or of louvre construction. SANDARD SES AND PACKS S 36 sandard se Hinges HARDWARE SPECIFICAION Set coprises hangers, door stops, nylon guide, screws and instructions. rack punched for White Depending on the type of shutter installation, Butt Hinge and Steadan Hinge are the standard hinges. For Pack Set logo APD60 soffit fitting: A60A 12 Material Aluiniu he APD60 is a pack of fittings only without track. Standard lengths reatents 2000, 3000, 4000 and 6000 special applications, Window also supplies various hinge options such as. Handle hinges to suit A1/60 Bracket op Pivot Assebly: AMF25P Steel, Zinc dichroated, Nylon HARDWARE SPECIFICAION AMF25P op Pivot AMF25BP Botto your requireents. Botto Pivot: AMF25BP Steel, Zinc dichroated, Nylon S Pivot Hanger: A60SN rack: A60A he hanger is fitted with four nylon tyred ballrace wheels. he adjustent bolt is Material Aluiniu attached to the top plate and secured in place with a locking clip which allows easy Standard lengths 2000, 3000, 4000 and 6000 installation. All steel parts are zinc dichroated. Butt Hinge Steadan Hinge S. A60SNS Hanger Handle Hinge Hinges: A75X47FHSS track available Stainless steel ortise hingeanodised. Aluiniu innon ill or clear Screws for the hinges are stainless steel. he other screws are in zinc dichroate finish. Brackets: A60SP Steel, in zinc dichroate finish of 5 Brackets A1/60/5 Accessories: Bracket: ADP1/60 Pack Bracket ade fro steel and supplied atching fasteners. Available in a pack of 5 or Pack of 8with Brackets A1/60/8. A75x47FHSS Spanner: 33 no. A60Ds stop Stainless Steel (supplied65 in sets and packs). ADP1/60 Bracket Hinge 63 Stainless Steel Bracket ade fro zinc plated33 steel. Supplied with atching fasteners. A901A aluiniu channel, available in 1200, 1500, 1800, no. A60sP spanner. 60SN Hanger 76 8 S A8G/901. A60SN Hanger hreshold: AllA902A hangers have nylon tyre wheels and are fitted with ball race bearings. he 60SN A902A threshold, aluiniu, available in 2100, 3000,body 4000 and Hanger has a nylon and6000 chroe precision bearings. he 60SSS hanger has a Stainless Steel A401 stainless body and precision bearings. Nylon tyre wheel hangers should not be used on installations involving teperatures exceeding 80 C. Butt Hinge Guides: Barrel Bolt Spanner: Accessories: Channels: arge Ball Stops 7 2-A. A902A Channel Magnetic Catch Single bi-fold shutter 45 Single bi-fold shutter pivoted at left pivotedat right 2-B 2-C hinged at left fixed wo sets bi-fold shutters hinged at right 1-A Mediu Ball Stops 2-Dof single panels Set hinged left and right 1-B Magnetic Catch 35 no. A901A Channel Magnetic Catch B A Set of single panels hinged left and right 17 hinged at right. A8G/901 A901A A902A A8G/901 Spring loaded 2 52 hinged at left DAA SHEE D40 Spring loaded Guide, nylon body and tip with stainless steel shaft and spring. Designed to slide in the 901 Channel and 902 threshold Channel 85 ISSUE 1 no. A1gn guide Stainless Steel Guide:. A902A Channel A60sP Pressed steel zinc plated 12 1GN Saw Cut. A901A Channel his nylon Guide is designed to slide through a deep x 5 wide saw cut in the botto rail of the door.butt he Guide Steadan Hinge Hingeis fitted on the floor at the edge of the opening in the overlap area. ISSUE 1 DAA SHEE B80 Steadan Hinge. A60SSS Hanger Stainless Steel stainless steel 63 Flush Bolt with flat shoot: A360 Single bi-fold shutter Single bi-fold shutter 15pivotedat right pivoted at left 2-A 2-B wo sets bi-fold shutters 2-C 2-D Ball Stop Magnetic Magnetic Catch Catch I N D O W ROYA ASSOCIAES IMIED Frae D R FACSMIIE: Securing Fixed Panel E n o ~ : Hardware B.02. Page: M S H Securing Bi-fold Panel Bi-fold, Sliding, Panel 4 Brown, White, Black Brass, Chroe 15 Ball Stops 3 Stainless Steel Barrel Bolt65 4B10-11: EEPHONE: A Friday, 30 veber E G I SWhite, E Black, R E Antique D A R CHang H IStrip, Eprotruding C S past window 2012 opening Stainless Steel, R Silver, Crea, B10-1 S C A E S : atelier- 62 AVONSIDE DRIVE, CHRISCHURCH, NEW ZEAAND Brass, Bright B10Brass B8Steel E -M A I :r o y a l. ab9 A Stainless r c h i t e c t x t r aassists. c opanel. n z oveent B10 E A E : 3 Handle Hinge Magnetic Catch 76 ISSUE:8 SH Hinge B9 1-1 Ball Stops MediuMediu Ball Stops Suitable for 3 Stainless Steel, Silver, Crea, White, Black, Antique Square, Rabbet, Post, 3 3 Brass, Bright Brass Steadan Hinge Colours Available 3 Butt 63 6 W 3 12 arge Ball Stops arge Ball Stops and ( Hangers per door): Guide: A8G/901 interior A60sn Spring loaded guide for use with 901A or 902A channels. Guide is nylon and stainless exterior A60sss steel. Flush Pull with deep grip: e panel 3 8, reference 1/60/5 and 1/60/8 respectively. Channels: SPECIFICAIONS Mediu Ball Stops Suitable for residential and light coercial folding partitions o cover any width of opening, any nuber of doors can be used eaves can be either end folding or centre folding eaves can fold to one or both sides of the opening o accoodate different building designs, doors can slide to one or both sides Pivot hardware enables an end folding internal partition to be designed using standard width door leaves with no need to reduce the width of the leaf adjacent to the Hinged door for easy access ay bejab incorporated into a sliding door arge Ball Stops Widely used in lighter coercial and industrial applications APPliCAtioN 4-1 APPliCAiOn Hardware Overview 45 for top hung interior folding partitions. Max 25kg each leaf For top hung straight sliding doors. Max 60kg each. 2 14

8 - Hardware echnical - Sliding Single Run Application Widely used in lighter coercial and industrial applications o cover any width of opening, any nuber of panels can be used o accoodate different building designs, panels can slide to one or both sides Hinged panel for easy access ay be incorporated into a sliding panel Where panels are fitted externally, a canopy is recoended Panel Specification rack Syste: Single Run (individual Panels) Max Panel Height: 2700 For ease of operation it is recoended that the panel width should not exceed 75% of the panel height. Panels for interior use can be of flush construction or glazed. Panels for industrial applications should be fraed, ledged and braced. Aluiniu panels should be constructed of box section, chanel or angle fraing, well braced and clad with flat or corrugated sheets. Hardware Specification rack : 80A Material : Aluiniu Standard lengths : 2000, 3000, 4000, 6000 Aluiniu track available in ill or clear anodised finish. Door Stop : 20DS (Stainless Steel) Hanger sets :. 52EN/4-A Stainless Steel hangers are fitted with nylon wheels on precision stainless steel ball race bearings. Vertical adjustent is siple and positive. Guide :. 21ER-A With precision stainless bearing. Channels Aluiniu & Polypropylene 94PPA Mill or clear anodised Standard lengths : 2000, 3000, 4000, 6000 Page : 28 ISSUE: SH

9 - Hardware echnical - Multi-fold Application Suitable for residential and light coercial folding shutters eaves can be either end folding or centre folding eaves can fold to one or both sides of the opening Pivot hardware enables an end folding internal partition to be designed using standard width panels with no need to reduce the width of the leaf adjacent to the post. o cover any width opening, any nuber of folding untits can be used. Panel Specification rack Syste: Multi-fold (individual leaves) Max eaf Height: 2700 Max eaf Width: 700 Designed to suit aluiniu folding screens with all panels of equal width. Panels can fold to one or both sides of the openingt. Pivot hardware enables an end folding internal partition to be designed using standard width panels with no need to reduce the width of the leaf adjacent to the post. All stainless steel hardware coponents are located inside the aluiniu stile s recess for flush and secure fitting. Hardware Specification rack - punched for soffit fitting: 80A Material : Aluiniu Standard lengths : 2000, 3000, 4000, 6000 Pivet Sets : 21EP-A Adjustable op & Botto Pivot Door Stop : 20DS (Stainless Steel) Hanger Set : End Hanger : 52EN-A Interediate Hanger : 52EN/4-A Stainless Steel hangers are fitted with nylon wheels on precision stainless steel ball race bearings. Vertical adjustent is siple and positive. Guide : 21ER-A With precision Stainless steel Bearing. Channels : 94PPA Aluiniu channel, available in 2100, 3000, 4000, 6000 ISSUE: SH Page: 29

10 . Page : 30 ISSUE: SH SPECIFICAIONS

Centre, Left or Right Yes. * Yes - constructed from Basswood * Yes - constructed from Basswood

Centre, Left or Right Yes. * Yes - constructed from Basswood * Yes - constructed from Basswood ISSUE: SH-16-0037 Introduction Window treatments traditional European styled are the perfect interior window management system. look like our Basswood shutters but offer a longer life span and more affordable