Electrical, Electronic, Fiber Optics and Telecommunications

Transcription

1 Electrical, Electronic, Fiber Optics and Telecommunications Distribution by FIBERARC GmbH Kernenriedstrasse Lyssach info@fiberarc.ch

2 Telecom, Fiber Optics, Electrical & Electronics Table of Contents FIBER OPTICS Examples of Typical Glass Fiber-Optic Constructions Comparative Fiber Optic Tool Selection Charts FO-CF Fiber Optic Center Feed Stripper FO 103-S Fiber Optic Stripper Line FO 103-D-J, FO 103-D-250 Dual-Hole Fiber Optic Strippers FO 103-T-250-J Tri-Hole Fiber Optic Stripper SnC Strip n Cut CFS-2, CFS-2 900, OPTISTRIP Fiber Optic Stripper FOJST Fiber Optic Jacket Slitting Tool FOKC Fiber Optic Kevlar Cutter /2SF Electronics/Kevlar Shears KS-1, KC699 Kevlar Shears ACS, ACS-2, ACS-K Armored Cable Slitter BrightPath EMS 6.6/4.0 CommScope Mid Span Entry Tool FDS, FDS-2-3MM Fiber Drop Stripper & Buffer Tube Slitter MSAT, MSAT 5 Mid-Span Access Tool MSAT Micro Mid-Span Access Tool MSAT Kit Mid-Span Access Tool Kit Series Fiber Buffer Tube and Drop Cable Slitter Series Kit Fiber Buffer Tube and Drop Cable Slitter FTS, FTS-005, FTS-035 Fiber Tube Scorer DS-60-C, DS-90-W Diamond-Tip Fiber Optic Scribe CS-30-W Carbide-Tip Fiber Optic Scribe CS-30-DE Double End Carbide Fiber Optic Scribe FOC-SS Fiber Optic Cleaver/FOC-125 Fiber Optic Cleaver FOC-125 Fiber Optic Precision Cleaver RMC-6 Ruler FO-VFL Fiber Optic Visual Fault Locator CCT-2 Fiber Continuity Tester Fiber Optic Inspection Microscope 200x/400x FO-R12 Fiber Ribbon Access Tool IET Insertion Extraction Tool Fiber Optic Crimp Tool RBT Riser Break-out Tool STR Steel Tape remover FOPD-25, FOPD-LC, FS800, FS 900 Fiber Optic Polishing Disc FIBER OPTIC POLISHING KIT FIBER SAFE SAFETY KIT/FCCT 125/FCCT 250 Fiber Optic Cleaner MDP-4 Miller Dispensing Pump MDP-8 Miller Dispensing Pump ELECTRICAL RCS-114, RCS-158 Round Cable Strippers MK02, MK02M Round Cable Strippers MK04 Cable Jacket Stripper MK01DA Outer Jacket Cable Stripper , 821, 921 Multi-Wire Strippers/Cutters S Adjustable Wire Stripper & Cutter with cam adjustment Adjustable Wire Stripper & Cutter TAS Thumb Adjustable Wire Stripper & Cutter PS 1 / PS 2 Self-Adjusting Wire Stripper MK 1 F/D Self-Adjusting Wire Stripper NN Wire Strippers Utility Cutter

3 ELECTRONICS 205 Rural C Line Wire Slitter & Stripper Figure-8 Aerial Self Supporting Duct Slitting Tools CS/925CS-ERGO Splicers Scissors CK6, 925CS KIT Splicer s Scissors/Splicer s Knife/Splicer s Kit SPECIALTY SCISSORS TWEEZERS AW, AWG Anti-Wicking Tools DESOLDERING GUNS SOFTY ANTI-STATIC DISPOSABLE WORK MATS RFNP / RFNP-S Long Nose Plier Long Nose Plier TELECOM PDT-66/110 Punch Down Tool RJC, RJ Crimping Tool BTC BT/RJ Crimping Tool SMART-STRIP Data Cable Strippers LDT-UTP, DDT-UTP Jacket Trimmer...122

4 Telecom, Fiber Optics, Electrical & Electronics EXAMPLES OF TYPICAL GLASS FIBER-OPTIC CABLE CONSTRUCTIONS 125µm Equivalent to in. 900µm Buffer Jacket, often referred to as tight buffer. loose tube, often referred to as buffer tube. 250 µm uv-cured buffer/coating, often referred to as bare fiber. Outer Jacket Aramid Yarn, Kevlar 900µm Buffer Jacket 250µm UV-Cured Buffer/Coating 125µm Cladding & Core Simplex scale 10:1 Outer Jacket Aramid Yarn, Kevlar 900µm Buffer Jacket 250µm UV-Cured Buffer/Coating 125µm Cladding & Core Distribution scale 2:1 Outer Jacket Aramid Yarn, Kevlar Loose/Buffer tube common sizes: 2.0/2.5/3.0mm 250µm UV-Cured Buffer/Coating 125µm Cladding & Core Indoor/Outdoor Loose Tube scale 2:1 72

5 COMPARATIVE FIBER OPTIC TOOL SELECTION CHARTS Diameter of Remaining Fiber or Buffer Coating 80 to 100 micron FO 103-S-100 (Part# ) 125 micron (from 250 micron buffer) Miller FO-103 Miller CFS FO-CF FO-SnC FO 103-S (Part# 80355) FO 103-D-250 (Part# 80675) FO 103-D-J (Part# 80676) FO 103-T-250-J (Part# micron FO-103-D-250 (Part# 80675) FO-103-T-250-J (Part# 80677) 400 micron FO 103-T (Part# 80740) FO 103-S-525 (Part# ) CFS-2 (Part# M) FO-CF (Part# 81400) FO-CF (Part# 81400) FO SnC (Part# 81430) FO SnC (Part# 81430) 125 micron (from 900 micron buffer) FO 103-D-250 (Part# 80675) FO 103-T-250-J (Part# 80677) CFS (Part# 81281) Choose from tools below to access fibers in loose/buffer tubes MSAT BrightPath EMS 6.6/4.0 MSAT 5 MSAT Micro MSAT Kit FDS 2-3mm FDS FTS 400 Series FTS-005 FTS-035 Part numbers vary depending on the outside diameter of the buffer tube. See individual tables in catalog for more information. 73

6 Fiber Optics FO-CF - Fiber Optic Center Feed Stripper > New fiber stripper with center feed design allows for longitudinal fiber stripping > The fiber is fully supported in the stripping process of 900 micron buffer coating to 250 micron and standard 250 micron coating to 125 micron stripping > Side mounted stripper blades provide convenient stripping of 1.6 mm to 3 mm cable jackets > Measurement scale in inches/mm built into the tool jaw and body up to 2 3/4 in. (70 mm) for ease of proper cable preparation > Compact, lightweight and ergonomically designed for ease of use > All cutting surfaces are precision formed, hardened, tempered and ground assuring precise cable jacket, buffer and acrylate removal with no scratching or nicking of the fiber > Tool is factory set and requires no adjustment > Removable cleaning brush is conveniently attached to the stripper for periodic cleaning of stripping jaws > Tool supplied with its own individual protective polymer tool case for clean and safe storage > Patent Pending > Dimensions: 1.17 x 2.19 x 4.08 in. (29.7 x 55.6 x mm) > Weight: 2.8 oz (79 g) > Part #: > FO-CF Brush Part No.: Jacket 900 Micron 250 Micron Three Fiber Stripping Stations 74

7 FO-103S - Fiber Optic Stripper > For stripping 250 micron buffer coating from 125 micron optical fiber > Precision diameter hole & V-opening in blade allow for accurate buffer coating removal > Pivot pin, spring and precision handles enhance tool functionality and durability > Factory set, requires no adjustment > Prevents scratching or nicking of optical fiber > All cutting surfaces are precision formed, hardened, tempered and ground assuring precise buffer removal > Length: in ( mm) > Weight: 2.5 oz (71 g) > See tables for part numbers FO 103-S Custom Applications > The same quality FO 103-S construction is available in a variety of stripping fiber diameters > Some models in the table below may be subject to a minimum order Part # Model Minimum Stripping Blade Diameter (microns) (inches) FO 103-S 125 µm.005 in FO 103-S µm in FO 103-S µm.0055 in * FO 103-S µm.006 in FO 103-S µm.0065 in * FO 103-S µm.007 in FO 103-S µm.0075 in * FO 103-S µm.008 in FO 103-S µm.009 in * FO 103-S µm.010 in FO 103-S µm.011 in * FO 103-S µm.012 in FO 103-S µm.016 in FO 103-S µm.021 in FO 103-S µm.035 in FO 103-S µm.045 in. *Replaces the No-Nik Fiber Optic Strippers. See table below for previous and new model/part numbers New Part# New Model # Old Part# Old Model # Old Handle Color FO 103-S-150 NN Gold FO 103-S-007 NN Mustard FO 103-S-200 NN Red FO 103-S-250 NN Lt. Blue FO 103-S-300 NN White All old part numbers are while supplies last. All new items come with yellow handles 75

8 Fiber Optics FO 103-D-J/FO 103-D-250 Dual Hole Fiber Optic Strippers > Dual hole models offer the same quality as our standard FO 103-S fiber tool coupled with a second hole > FO 103-D-J: Second hole for stripping mm fiber jackets and standard 125 micron fiber stripping (250 micron removal to 125 micron) > FO 103-D-250: Second hole for stripping 900 micron tight buffer down to 250 micron buffer coating and standard 125 micron fiber stripping (250 micron removal to 125 micron) allows longer stripping lengths without damaging the fiber > Easy-to-read stripping diagrams imprinted on handles > Length: in. (137 mm) > Weight: 2.5 oz (71 g) > FO 103-D-J Part #: > FO 103-D-250 Part #: FO 103-T-250-J Tri-Hole Fiber Optic Strippers > Three-hole model performs all common fiber stripping functions in one compact tool... Hole for removal of 1.6 to 3 mm fiber jackets Remove 900 tight buffer to 250 micron buffer coating Standard 250 to 125 micron stripping > Same consistent quality and features found in our standard FO 103-S tool > Length: in. (137 mm) > Weight: 2.5 oz (71 g) > Part #: > Also available: FO 103-T Fiber Optic Stripper for 400 micron coated PM Fiber (Part : 80740) 76

9 SnC - Strip n Cut > New all-in-one unique tool design combines jacket stripping, optical fiber stripping and cutting of Kevlar strength members in one compact tool body > Allows jacket removal from 1.6 to 3.0 mm with holes for stripping 900 micron tight buffer to 250 micron buffer coating and standard 125 micron fiber stripping. > Fiber stripper and Kevlar cutter slides out of the protective tool body when in use and slides back inside when not in use by activating the sliding tab located on each side of the tool > The fiber stripper and the Kevlar cutter are conveniently stored inside the tool body when not in use, for extra safety and tool life protection > Easy to read fiber stripping diagrams are molded into the tool body > Tool body has a handy molded-in loop for attaching/hanging purposes > All cutting surfaces are precision formed, hardened, tempered and ground assuring precise tool performance > Factory set, requires no adjustment > Patent Pending > Dimensions: 3.75 x 1.25 x.70 in. (95 x 32 x 18 mm) > Weight: 3 oz (85 g) > Part #:

10 Fiber Optics CFS-2/CFS Fiber Optic Stripper > CFS-2 for stripping 250 micron buffer coating to expose 125 micron cladded fiber > CFS strips 900 and 250 micron buffer coating down to 125 micron cladded fiber with only ONE-STEP STRIPPING PREPARATION > Second hole for stripping mm fiber jackets > Pre-set at the factory no adjustments needed > Will not scratch or nick glass fiber > All stripping surfaces are manufactured to precise tolerances to assure clean, smooth strips > Comfort-grip, ergonomic handles > Lock to hold tool closed when it is not in use > Made in China > Length: 6.5 in (165 mm) > Weight: 4.2 oz (119 g) > CFS-2 Part #: M > CFS Part #: Optistrip - Fiber Optic Stripper > Removes secondary coatings from optical cable and other small cables up to 3.0 mm (0.12 inches O.D.) > Equally effective on loose tube or tight fit fiber > Damage to cladding prevented by inserting guide bushings which ensure precise location of the fiber throughout the stripping operation > Simple setup for operation: fit a pair of guide bushings for selected lead diameter and adjust blade depth > Supplied with storage case and guide bushings (0.5, 1.0, 1.5, 2.0, 2.5, 3.0 mm) > Stripping Capacity Fiber optic tubes up to 3.0 mm (0.12 inches O.D.) P.T.F.E. coated wires 0.5 to 3.0 mm (0.02 to 0.12 inches) O.D. > Replacement Blades (pair): Part No.: > Replacement set guide bushings: Part No.: > Weight: 20 g (1 oz) > Dimensions: 108 x 29 x 13 mm ( 4.3 x 1.1 x 0.5 inches) > Part #: > Made in China 78

11 FOJST - Fiber Optic Jacket Slitting > Compact and easy to use ONE-STEP jacket slitter for PVC jacketed fiber cables > Provides two jacket slits 180 degrees apart with nick free jacket slitting required for cable preparation on certain fiber connectors > Blade cassettes have blade indicator marks providing the exact location of the blade for an accurate cable preparation length > Single blade cassette designed with two slitting channels to accomodate the various jacket sizes. > Factory set non-adjustable blade cassette for repeatable and exact cable preparation each and every time > Dimensions: x.875 x in (73.03 x x mm) > Weight:.94 oz (26.7 g) > FOJST 2/3 mm part # > FOJST 1.6/2.4 mm part #

12 Fiber Optics FOKC - Fiber Optic Kevlar Cutter > Designed to cut Kevlar strength members in fiber optic cables > Powerful quick cutting action > Full serrated edge for consistent, fast and clean cuts > Lightweight and compact > Return spring designed for precise repeated cuts > Ergonomic handles with cushioned non-slip grips > Made of high carbon steel specially treated for long life and trouble free cuts > Made of Chinese and American parts > Engineered in the U.S.A > Length: 5.75 in. (146 mm) > Weight: 2.5 oz (72 g) > Part #: /2SF - Electronic Kevlar Shears > 86 1/2SF is a high-leverage tool for cutting, trimming and slicing through fibers and other tough industrial and electronics material > Use to cut and trim wire insulation materials, copper leads, filament wire, and nickel-ribbon > Use 86 1/2SF to trim DuPont Kevlar Aramid fibers > Hot-forged, high carbon steel for long life > Quick action spring response and two sharp points > 86 1/2SF has one blade serrated and yellow cushioned grips > Length of cut: 0.63 in. (16 mm) > Length: 6.5 in. (165 mm) > Weight: 4.8 oz (136 g) > Part #: /2SF > Part #: /2S NO grips 80

13 KS-1 - Kevlar Shears > Lightweight shears ideal for cutting Kevlar strength members found in fiber optic cable construction > Ergonomic molded handles provide comfort for both right and left handed users > One micro-serrated blade reduces slippage for more positive cutting action > Blades made from high carbon molybdenum, and vanadium steel for long life > Made in Taiwan > Length: 5.5 in. (140 mm) > Weight: 2.8 oz (79 g) > Shears Only (Part #: 80671) > KS-1 available with nylon pouch with belt loop (Part #: 80665) > Nylon pouch only (Part #: 80669) KC699 - Kevlar Shears > Oversized molded handles for operator comfort > Blades are hardened stainless steel with a fine serration on one blade to grip Kevlar fibers and prevent slipping while cutting > Ambidextrous handles for right- and left- hand use > Made in Japan > Length of cut: 2.5 in. (64 mm) > Length: 7.25 in. (184 mm) > Weight: 1.6 oz (45 g) > Part #:

14 Fiber Optics ACS/ACS-2/ACS-K Armored Cable Slitters ACS > Professional grade tool ideal for slitting the corrugated copper, steel or aluminum armor layer on Fiber Feeder, Central Tube, Stranded Loose Tube fiber optic cables and other armored cables > Rugged anodized aluminum and steel construction > Versatile design allows jacket or shield slitting on non-fiber optic cables as well > Tool slits outer polyethylene jacket and armor in one operation Performs longitudinal slitting and circumferential (ringing) for end stripping Blade rotates 90 degrees by activating blade lever, allowing easy mid-span preparation (ringing and slitting) > ACS is adjustable from in. (8 mm) to in. (28.6 mm) cable O.D. > ACS 2 is adjustable from in. (4 mm) to.393 in. (10 mm) for smaller cable O.D. options > Adjustable blade depth to 5.5 mm maximum to accommodate different cable jackets > Cable guide wheel provides cable stability and allows for easier tool movement along the cable > Red cable guide wheel (Part No.: 37896) for smaller O.D. cables (4 mm) to.393 in. (10 mm) can be ordered separately > U.S. Patent Nos.: D505, 056S > Height: 5 in (127 mm) > Weight: 10 oz (284 g) > ACS Part #: > ACS-2 Part #: > ACS-K Part #: (kit includes ACS tool (Part # plus one red cable guide wheel kit (Part No.: 37896) for smaller O.D. cables > Replacement blade: Part No.: (CB 251-K) ACS-2 82

15 BrightPath EMS 6.6/4.0 Mid-Span Entry Tool > Especially designed to mid-span access CommScope BrightPath Self Support Figure 8 Outdoor Fiber Drop Cable > Tool has two precise shaving channels, one to remove the outer MPDE jacket and one to access the 4 mm buffer tube fibers > Fixed control of blade cutting depth and angle protects fibers from damage > Cable is easily inserted and removed by opening and closing spring loaded tool halves with a convenient and quick turning thumb screw > Replacement Blade for jacket and 4 mm buffer tube is Part No (CB229) > Length: 3.75 in. (95 mm) > Weight: 6.8 oz (193 g) > Part #:

16 Fiber Optics FDS - Fiber Optic Stripper > Designed for stripping Flat Drop Fiber Cable used in FTTH Fiber to the Home applications > ONE STEP stripping action that removes the jacket in two locations top and bottom to expose the dielectric strength memberswhile allowing the quick removal of the jacket > Tool is small and has a lightweight polymer body for ease of use > Easily strips Flat Drop lengths of 2-15 feet plus > ONE TOOL ONLY - FDS will strip Flat Drop Fiber Cable on the cables listed in the table below. (Please call Customer Service for other cable manufacturers) U.S.: U.K.: > Replacement Blade Part No.: (CB229) > Length: 3.75 in (95mm) Weight: 6.8oz (193g) > Part #:42670 Drop Cable Manufacturer Stripping Channel CommScope A Corning A Draka/Comteq A OFS A Berk-Tek B Prysmian B Sumitomo B Superior Essex FDS-2-3MM - Fiber Optic Stripper & Buffer Tube Slitter > Multi-purpose tool designed for stripping Flat Drop Fiber jacket and accessing 2 mm and 3 mm buffer tubes on (FTTH) Fiber to the Home applications > Three individual stripping channels in one compact tool body for jacket removal and 2 mm and 3 mm buffer tube slitting > Lightweight polymer body > T-bar handle grip design for extra ease of jacket stripping > Tool can be used with Flat Drop Fiber manufacturers listed in the table below. (Please call Customer Service for other cable manufacturers) U.S.: U.K.: > Length: 3.75 in. (95mm) > Weight: 6.8oz (193g) > Part #: > Jacket Replacement Blade Part #: (CB229) > Buffer Tube Replacement Blade Part #: 1 set (two blades) with 1/16 in. Allen Wrench (Note: 2 each CB229 (P/N37048) and two sets of required to replace all the blades on the FDS-2-3MM) B Drop Cable Manufacturer CommScope Corning Draka/Comteq OFS Stripping Channel A A A A 84

17 MSAT - Mid-Span Access Tool > Quickly and easily access fibers in 2, 2.5 and 3 mm buffer tubes in a mid-span location without fiber damage > All blades precisely factory mounted in tube slitting channels with no adjustment required by the installer > Tool design incorporates buffer tube size gages on the tool body for ease of selecting proper tube slitting channel > Convenient spring loaded lever opens and closes the tool and lever becomes flush with the top of the tool body when closed > For use with the following diameter buffer tubes: 2.0 mm mm (0.071 in in.) 2.5 mm mm (0.090 in in.) 3.0 mm mm (0.110 in in.) > Made in the U.S.A > Length: 2.5 in. (63.5 mm) > Weight: 8oz (226.7g) > Part #: > Replacement Blade: Part # includes 1 blade set (2 each) and 1/16 in. Allen wrench > Same blade Part # for all three tool channels MSAT 5 - Mid-Span Access Tool > Allows easy mid-span access to optical fibers in loose buffer tubes > Access tube sizes from 1.9 mm to 3.0 mm > Shaves precise opening to prevent fiber damage > Sizing channels to easily determine tube size > Locking mechanism ensures tool will remain closed through the entire shaving operation > Replacement Blade: Part No.: (5 blades 2 screws) > Dimensions: 3.9 x 1.5 x 0.7 in. (99 x 38 x 18 mm) > Weight: 1.36 oz (38.5g) > Part #:

18 Fiber Optics MSAT Micro - Mid-Span Access Tool > Compact and user friendly tool provides quick and easy mid-span access to smaller buffer tubes without fiber damage > Tool design will accommodate a range of interchangeable inserts from 1.2 mm up to and including 1.8 mm > Accesses the fiber by precision shaving of the buffer tube wall > Consistent and reliable buffer tube access without any adjustment to tool insert or blade > Double-sided blade for twice the blade life > Locking lever mechanism provides constant pressure to the two body halves ensuring a precise and consistent shaving operation > Patent Pending > Dimensions: 2.88 x 1.63 x 1.50 in. (73 x 41 x 38 mm) > Weight: 6.6 oz (187 g) > Insert dimensions: 1.77 x in. (45 x 12 mm) > Insert weight: 0.9 oz (26 g) > Tool body available as Part No.: (without insert). > Replacement Blade Part No.: (includes 1 double sided blade, 1 screw and 1/16 in. hex wrench) > Tool Inserts and Part No.: 1.2 mm mm mm mm mm mm mm MSAT Kit Kit for Mid-Span Access > Designed for easy mid-span of fiber tubes in the range from mm > Foam Lined Kit includes: RCS Jacket Stripper FO-103-S - Fiber Stripper KS-1 Kevlar Shears MSAT 5 - Mid-Span Access Tool MSAT Micro Body 4 MSAT Micro Inserts (1.2 mm, 1.4 mm, 1.6 mm, 1.8 mm) > Part #:

19 400 Series - Fiber Buffer Tube & Drop Cable Slitter > For mid-span and end slitting of fiber buffer tubes and fiber drop cable > Different models available matched to the size of buffer tube or drop cable to be prepared > Dual blade design > Self closing for safety > Latch locks tool closed > Comfortable soft plastic grips > Length: 6.5 in. (165 mm) > Weight: 9.0 oz (255 g) > Replacement Blade Part #: (two blades per package) > See table for part numbers Model Part# Color Tube Sizes 400-Series Guide Block Sets (mm OD) (in OD) mm Copper mm Red mm Blue mm Green mm Green mm Yellow mm Grey mm Beige mm Dark Brown mm Dark Blue *400 - Drop A Gold 4.4 x mm Orange mm Blue Model Guide Block Set Part# Color Tube Sizes (mm OD) (in OD) 1.8 mm Copper mm Red mm Blue mm Green mm Purple Drop A Gold 4.5 x mm Yellow mm Grey mm Beige mm Dark Brown mm Dark Blue mm Orange mm Blue

20 Fiber Optics 400 Series Kit - Fiber Buffer Tube & Drop Cable Slitter > Kit for mid-span and end slitting of fiber buffer tubes and fiber drop cable > Interchangeable color coded head blocks matched to buffer tube or drop cable size > Blade depth precision factory set and can be field adjusted if required > Dual blade design > Self closing for safety > Latch locks tool closed for ease of use when performing mid-span slitting preparation > Comfortable plastic grips > Replacement Blade Part #: (2 required) > Kit Dimensions: 11.5 x 8.25 x 2.5 in. (292 x 210 x 63.5 mm) > Kit Weight: 2.04 lbs (925.3 g) > See table for part numbers Kit Part # Guide Blocks Included /3.0/4.4 x 8.2 mm /2.5/3.0 mm / 2.2 / 2.5 / 3.0 / 3.3 mm mm /3.5/5.0 mm mm mm mm Replacement Blade (two blade package) Replacement Blade (10 each) 88

21 FTS Series - Fiber Tube Scorers FTS-005 FTS FTS-035 > Precise one-step buffer tube scorer > Factory fixed hardened carbon steel blade requires no blade adjustment > Body made of strong resilient acetal polymer (FTS-005-Red, FTS - Yellow, FTS Blue) > Dimensions: 3.75 x.625 in. (95.53 mm x mm) > Weight: 1oz (28g) Model # Buffer Tube Sizes Wall Thickness Part # FTS-005 up to 2 mm (up to.079 in) FTS 1.6 mm mm (0.062 in in) FTS mm (0.062 in in) 0.17 mm mm (0.007 in in) 0.25 mm mm (0.009 in in) 1.0 mm mm (0.039 in in)

22 Fiber Optics DS-60-C/DS-90-W Diamond-Tip Fiber Optic Scribe > Quality fiber optic scribes featuring a protective retractable barrel with pocket clip and a stainless steel mounted diamond tip in your choice of conical or wedge shapes > These scribes are specially made for the scratch and pull technique of scribing optical fiber. The wedge shape provides a more durable edge Model Description Full Length Part # DS-60-C 60 Cone Angle-Diamond Tip Retractable Scribe in./137 mm DS-90-W 90 Wedge-Diamond Tip Retractable Scribe CS-30-W Carbide-Tip Fiber Optic Scribe > The CS-30-W is a 30-degree wedge-tip carbide scribe 3.8 mm wide for long life and simple fiber termination > Housed in a rugged, anodized aluminum casing 112 mm long and 8 mm in diameter, the CS-30-W fits comfortably in either hand and in your pocket or tool kit > The CS-30-W includes a convenient pocket clip and soft, brightly colored, protective Squeeze and Pull cap for easy and quick tool selection Model Description Full Length Part # CS-30-W 30 Wedge-Carbide Tip in./112 mm CS-30-DE Double End Carbide Fiber Optic Scribe > Reversible 30 degree angled carbide blade edged on both ends to double the life of the tool > 5 mm wide blade wider than conventional scribe blades for greater visibility > Soft feel grip on rugged anodized aluminum casing > Hex-shaped end to prevent scribe from rolling off work table > Plastic cap protects blade when tool is not in use > Convenient pocket clip > Carbide Blade Replacement Part #: Model Description Full Length Part # CS-30-DE 3/16 in. 5-1/4 in (5 mm) (133 mm) 90

23 FOC-SS - Fiber Optic Cleaver > Designed for fiber cleaving applications that include field termination of fiber connectors and mechanical splices as well as laboratory applications > Small, lightweight and easy to use > Features a graduated leaf spring scale, which allows cleave lengths of 2.0 mm to 20.0 mm > The Score and Snap leaf spring function is easy, fast and is the preferred method by many fiber installers > Produces a precise cleave endface angle of less than 2 degrees > Supplied with a standard carbide cleaving blade capable of over 6,000 consistent cleaves > Cleaving tool is designed for single mode and multimode fiber with cladding O.D. diameter of 125 micron with no operator tool adjustments > Cleaver Dimension: 4.88 x 0.79 x 1.57 in. (124 x 20 x 40 mm) > Weight: 2.12 oz (60g) > Fiber Optic Cleaver: FOC-SS Part #: > Leaf Spring Replacement: FOC-LS Part #: > Carbide Blade Replacement: FOC-CBL, Bladelife scores 6,000* Part #: > Diamond Blade Replacement: FOC-DBL, Bladelife scores 10,000* Part #: *Based on no damage or chipping to blade FO Precision Cleaver > Small and lightweight design that is easily used in the lab or in the field > Provides ultimate reliability, repeatability and efficiency along with ease of use > Designed for single and multimode fiber with cladding diameter of 125 micron > Fiber coating diameters of 250 micron and 900 micron > Cleaved length- 6-20mm (250 micron) and 10-20mm (900 micron) > Provides 48,000 cleaves blade life (1,000 fibers x 3 heights x 16 positions) before blade replacement > Cleave angle capability provides a precise cleave end face angle of < 0.5 degrees > Cleaver supplied with Side Cover installed only (no Scrap Collection System Scrap Box) > Convenient protective soft shell suede carrying case, and 1.5mm Hex Wrench provided > Made in China > Dimensions: 2.7 x 3.2 x 1.6 in (69 mm x 82 mm x 41mm) > Weight: 6.4 oz. (181 g) > Part#:

24 Fiber Optics RMC-6 - Ruler > Precision quality stainless steel 6 in. (150 mm) ruler > Sliding clip for pocket attachment and depth gauge use > One ruler side indicates inches and mm and one side indicates 64th and mm conversions > Ideal addition for fiber kits as well as other specialty tool kits > Weight: 1.0 oz (28 g) > Length: 6.4 in. (163 mm) > Part #: FO-VFL - Visual Fault Locator > Slim pen style 650 nm red visible laser diode fault locator for single and multimode fiber > Efficient and economical tool for fiber tracing, fiber routing, and continuity checking in an optical network, during, and after installation > Detects fiber breaks, fiber leaks, stress points and faulty connectors > Features a universal connector accepting any optical connector style with 2.5 mm ferrule such as FC, SC, ST, E2000, and APC > LED indicates function status, such as ON and OFF of laser, continuous laser mode, pulse laser mode, and low battery > Includes two 1.5V AAA batteries, cushioned vinyl carrying case, lense cap, and instruction sheet > Additional power button prevents accidentally activating the laser and draining the batteries > Average laser life is approximately 3000 hours > Maximum output power is 5 mw > Minimum coupled power is 0.5 mw > For single mode up to 7 km, for multi-mode up to 3 km > Laser class 3A > CE, RoHS compliant > FO-VFL without 1.25 mm Adapter (Part No ); Made in China > FO-VFL with 1.25 mm Adapter included (Part No ); Made in China > 1.25 mm Adapter Only (Part # ); Made in Taiwan 92

25 CCT-2 - Fiber Continuity Tester > Provides a high intensity, long-lasting RED LED light source that transmits light instantly and accurately down the fiber to a maximum range of 2 km > New design provides a more economically priced tool over the original CCT-2001 > Provides a fast, efficient and low cost check of fiber continuity in the field > Use with both single mode and multimode fiber > Compatible with almost all types of connectors including ST, FC, SC, LC and MT-RJ > Push button operation > Uses (3) each LR41 or AG3 batteries (included) > CE certified > ROHS Compliant > Made in China > 5 lumens, 30mA, nm > Part #: Fiber Optic Inspection Microscope - 200x400x > Available in magnification strengths of either 200x or 400x > Achromatic glass objective for excellent image quality > Focus wheel for proper focus at all times > Universal 2.5 mm adapter for nearly all ST, SC and FC connector ferrules included as the standard adapter > Integrated laser safety filters (not intended for viewing lit fibers) > Coaxial Illumination by LED light giving up to 100,000 lamp hour life and extended battery life > Side illumination port allows back lit inspection of jumpers and can be used as a fault finder > Body of durable aluminum comes in soft padded storage case > Takes 3 AAA batteries (included) > Made in China > Length: 9 in. (230 mm) > Weight: 1.2 lbs (550 g) without case > 200x Part #: > 400x Part #:

26 Fiber Optics FO-R12 - Fiber Ribbon Access Tool > Removes outer jackets from 12 count fiber ribbons > Factory set, requires no adjustment > Prevents scratching or nicking of optical fibers > All cutting surfaces are precision formed, hardened, tempered and ground > Tools for other fiber counts available upon request > Length: in ( mm) > Weight: 2.5 oz (71 g) > Part #: IET - Insertion/Extraction Tool > Easily inserts and extracts fiber optic connectors in high density patch panels > Works with LC and SC simplex and duplex connectors as well as MU, MT-RJ and other similar types > Tool tip design insures positive gripping without slipping > Spring loaded tool action and ergonomic grips allow easy, comfortable and precise left or right hand operation > Made in China > Dimensions: 8.75 in. x 2.75 in. x.75 in. ( mm x 70 mm x 19.1 mm) > Weight: 3.49 oz (99 g) > Part #:

27 Fiber Optic Crimp Tool > Ratcheting action crimp tool for positive, full cycle crimping of fiber optic connectors > Rugged steel frame > Interchangeable jaws > Several common fiber optic hex and oval jaws available > Made of Taiwan and America parts > Engineered in the U.S.A. > Length: 8.6 in. (218 mm) > Weight: 1.1 lb (500 g) With Set Jaw # Part # Square Hex Sizes Oval Sizes * ,.100,.137,.213, ** ,.078,.128,.151, ** ,.162, ** ,.151,.178,.213 RBT - Fiber Break-out Tool Jaw Set Only Part # 39844* 39845* 39842* 39843* > For use in FTTH MDU (Multiple Dwelling Units) as well as other riser cable applications > Preparation tool especially designed to shave a break-out window in riser cable with no fiber damage while allowing individual fiber extraction > Tool is compact and lightweight and has rugged aluminum body design > Allows easy and fast access to closely spaced riser cables especially in small confined areas > Compact and thin profile tool design allows for ease of use when riser cable is surface mounted, without the need for separating it from the mounting surface > Shaves a longitudinal break-out window in 8.5 mm, 10.5 mm and 14 mm O.D. riser cables without any time consuming tool adjustment > Factory fixed shaving blade made of high carbon steel is safely recessed away from installer s hand to minimize exposure > Call Customer Service for applicable cables U.S.: U.K.: > Tool Dimensions: 4 in. x 1.5 in. x 5/8 in. (100 mm x 38 mm x 17 mm) > Weight: 3.68oz (105g) > Replacement Blade: Part No: includes 10 blades, two spare mounting screws and washers > Part #: Cable Manufacturers Cable Prysmian Acome Draka SILEC Verticasa PACE ezbreakout Indoor Sheath MS 95

28 Fiber Optics STR - Steel Tape Remover > Easily opens/separates the steel tape armor on fiber optic cable > Unique counter rotation mechanism opens steel tape armor in 2 1/2 3 1/2 turns allowing for cutting of the armor > Accomodates steel tape armor from 1 2 mm OD > Neodymium rare earth magnet holds tool halves together making operation easy > Tool totally heat treated for long life > Screw clamps are high-strength alloy steel > 1.5 in. (38.1 mm) outside diameter fits comfortably in your hand > Made in China > Dimensions: Diameter 1.5 in. x.82 in. (38.5 mm x 20.7 mm) > Weight: 9.0 oz (258 g) > Part #: FOPD-25, FOPD-LC, FS800 FS900 - Fiber Optic Polishing Disc FOPD-25 FOPD-LC FS900 FS800 > High quality hand polishing disc for fiber optic connectors > Universal design fits most 2.5 mm ferrule connectors including: ST, SC and FC connectors > Inside and outside rims designed for improved hand positioning while performing the polishing operation > Channeled, raised base allows debris to escape easily and provide for easy polishing action > High quality, precision machined stainless steel design for long life > Diameter: 1.94 in. (49.2 mm) > Weight: 1.5 oz (43 g) > FOPD-25 Part #: 80688; Made in the U.S.A. > FOPD-LC also available (aluminum disc for 1.25 mm ferrule LC connectors) (Part #: 80754); Made in Taiwan > FS800 is 1.5 in. diameter plastic disc designed for most 2.5 mm ST, SC and FC connectors (Part #: 46167); Made in the U.S.A. > FS900 is 1.5 in. diameter stainless steel disc for 2.5 mm connectors (Part #: 46169); Made in the U.S.A. 96

29 Fiber Optic Polishing Kit Complete kit includes: > Clear Lexan polishing plate > Neoprene polishing pad > Universal plastic polishing puck > Universal stainless steel polishing puck > 12 micron polishing film 10 included > 3 micron polishing film 10 included >.5 micron polishing film 10 included > Lint-free cleaning wipes 25 included > Pre-saturated bifurcated swipes 10 included Model Description Dimensions Part # PK2000 FS600 FS700 FS800 FS900 PFA0-5 PFA0-3 PFA0-12 Fiber Optic Polishing Kit Complete Fiber Optic Polishing Plate Lexan Fiber Optic Polishing Pad Neoprene Fiber Optic Polishing Puck Plastic Steel 2.5 mm Fiber Optic Polishing Puck Stainless Steel 2.5 mm Fiber Optic Polishing Film Aluminum Oxide 5 Micron Color: White Fiber Optic Polishing Film Aluminum Oxide 3 Micron Color: Yellow Fiber Optic Polishing Film Aluminum Oxide 12 Micron Color: Red L: 14-3/8 in. W: 9-1/2 in. D: 2-3/8 in 365 mm x 241 mm x 60 mm L: 13 in. W: 9in. D: 1/4 in 330 mm x 229 mm x 6 mm H: 5-1/2 in. W 5-1/2 in D: 1/8 in. 140 mm x 140 mm x 3 mm D: 1-1/2 in 38 mm D: 1-1/2 in 38 mm 3 in x 6 in. 76 mm x 152 mm 3 in x 6 in. 76 mm x 152 mm 3 in x 6 in. 76 mm x 152 mm F1000 Fiber Cleaning Wipes 3 in x 4 in. 76 mm x 101 mm FS400 Bifurcated Swipes 4-1/4 in 108 mm

30 Fiber Optics Fiber-Safe Safety Kit > Fiber-Safe safety kit is specifically for working safely with glass fiber. > Complete kit includes a Fiber-Safe polishing / work mat, fiber scraps trash can, splinter removal tweezer, ten bifurcated cleaning swipes, each with a self-contained alcohol dispensing tube, and safety glasses. > Kit items can also be purchased separately. See table for part numbers. Model Description Dimensions Part # FS9500 FS100 Fiber Optic Safety Kit Complete Polishing/Work Mat Color: Black L: 16.5 in. W: 3.5 in mm x 88.9 mm L: 22 in. W: 14 in FS200S Fiber Scraps Trash Can H: 4.1 in. W: 2.6 in mm x mm FS300 Safety Glasses N/A FS400 FS500 Bifurcated Swipes (10 included) Fiber Splinter Removal Tweezers FCCT-250/FCCT-125 L: 5 in. 127 mm L: 4.25 in mm Connector/Adapter Cleaners > The Miller FCCT cleaner series by Ripley uses a mechanical dry cleaning design that provides fast and reliable cleaning to fiber connectors and adapters > FCCT-250 model designed for FC, SC and ST connectors and adapters > FCCT-125 model designed for LC and MU connectors and adapters > Cleaner provides 360 degree cleaning coverage with 800+ cleanings > Automatic feed provides a fresh section of lint free fabric after each use > Dust cover for full contamination protection of tool cleaning fabric > Tool body window indicator allows user to view remaining cleaning fabric > One single forward push action engages the cleaner with an audible click indicating that the cleaner is properly seated and cleaning is complete > Pull Out nozzle extends to a total length of 3.25 in. (82.55 mm) for easier access to compact adapter panels > Dimensions: 7 in. (177.8mm) X.68 in. (17.27mm) X.68 in.(17.27mm) > Weight:.896 oz. (25.4 g) FCCT-250 Part No.: FCCT-125 Part No.:

31 MDP-4 - Miller Dispensing Pump > Square HDPE 4 oz (118 ml) container provides stability and offers stainless steel pump > Use with Isopropanol for proper cleaning of fiber during the cable preparation > One handed pump operation frees up user s hands > Cam-lock hinge keeps lid open and closed to reduce odors > Pump design with purity protector prevents fluid from reentering the bottle > Each touch of the pump dispenses approximately 2cc of liquid > Container is not supplied with liquid > Dimensions: 3.1 x 2.1 in. (79 x 54 mm) > Weight: 2.3oz (65g) > Part #: MDP-8 - Miller Dispensing Pump > Oval (Euro Style) container design with rectangular bottom for stability > Polypropylene Twist-lock pump provides leak-free seal for travel and is ideal for use in a fiber kit > Use with isopropanol for proper cleaning of fiber during the cable preparation > One handed pump operationfrees up user s hands > Container not supplied with liquid > Dimensions: 2.9 x 5.5 x 2.4 in. deep (74 x 140 x 61 mm deep) > Capacity 8 oz (250 ml) > Weight 1.8 oz (51 g) > Part #:

32 Electrical RCS Round Cable Strippers > Designed for fast, safe, and precise jacket removal of PE, PVC, rubber, and other jackets > Fiber Optic cables - excellent tool for precise jacket stripping of fiber optic multi-fiber cables > For smaller diameter cables: to 1.14 in. ( mm) > Rotary cut to a longitudinal cut along the cable length for end stripping > Spiral cut for end stripping and mid-span stripping > Spiral cutting features provides easier removal of harder jackets > Spring-loaded cable brace firmly secures cable to the blade for controlled cutting action > Comfort and ergonomic design for ease of use and storage > Long life blade design > Blade depth can be regulated by simply turning the blade housing > Blade housing is PTFE coated, for smooth,low effort stripping > Made in U.K. > Length: 5.43 in. (138 mm) > Weight: 3.5 oz (100 g) > Part #: > Replacement blade: CB231 (Part #: 37150) RCS Round Cable Strippers > Designed for fast, safe, and precise jacket removal of PE, PVC, rubber, and other jackets > Fiber Optic cables - excellent tool for precise jacket stripping of fiber optic multi-fiber cables > For larger diameter cables: 0.75 to 1.58 in. (19 to 40 mm) > Rotary cut to a longitudinal cut along the cable length for end stripping > Spiral cut for end stripping and mid-span stripping > Spiral cutting features provides easier removal of harder jackets > Spring-loaded cable brace firmly secures cable to the blade for controlled cutting action > Comfort and ergonomic design for ease of use and storage > Long life blade design > Blade depth can be regulated by simply turning the blade housing > Blade housing is PTFE coated, for smooth,low effort stripping > Made in U.K. > Length: 6.02 in. (153 mm) > Weight: 3.84 oz (110 g) > Part #: > Replacement blade: CB231 (Part # 37150) 100

33 MK02/MK02M - Cable Strippers > Cable stripper for outer jackets & insulations from 0.18 to 1.12 in. (4.5 to 28.5 mm) O.D. > Stripping action is both circumferential, then longitudinal for removal of insulation section at the end or mid span of wires > Note: Does not provide a Sprial Cutting feature > Adjustable depth up to 0.12 in. (3 mm) cutting depth > Spherical blade for softer insulation is standard; chisel point blade for harder coverings is optional > Solid construction for rugged applications > Made in China > Stripping Capacity 0.18 to 1.12 in. (4.5 to 28.5 mm) O.D. > Weight: 4.2 oz (120 g) > Dimensions: 5.3 x 1.6 x 0.6 in. (135 x 40 x 15 mm) MK02 > MK02 has handy spring-loaded hook ripping blade at base of tool to facilitate insulation removal > MK02 Part #: MK02M > MK02M the same as the MK02 without the spring-loaded hook ripping blade >MK02M Part #: Both > Replacement Blades for MK02 & MK02M: Spherical cutting blade (set of 5) Part # Chisel point blade (set of 5) - Part #

34 Electrical MK04 - Cable Jacket Stripper > Cable stripper for outer jackets & insulation on large diameter cables > Cable Size Range in O.D in. to 2.36 in. (20 to 52 mm) > Heavy duty construction for industrial environments > Rotary cut to a longitudinal cut along the cable length for end stripping > Spiral cut for end stripping > Spiral cut for mid-span stripping > Spiral cutting feature provides easier removal of soft jackets and on larger cables > Adjustable blade up to 0.20 inches (5 mm) cutting depth > Blade depth setting can be locked to assure consistent repetitive operations > Roller support of cable for smooth stripping action > Wheel blade applications available contact Customer Service for sizes and applications > Made in China > Replacement Fixed Blade Assembly: Part#: > Replacement Fixed Blade Cartridges (FC2) Part #: for larger O.D. cable & (FC3) Part #: for smaller O.D. cable > Weight: 1.5 lbs (680 g) > Size: 3.7 x 1.7 (head) x 9.8 in. (95 x 42 x250 mm) > Part #: MK01DA Outer Jacket Cable Stripper > Designed for precision cable stripping of a variety of insulation types including rubber, PVC, nylon and cotton > Wire Size: 0.31 in. ti 1.5 in (8 mm to 33 mm) > Adjustable blade depth up to 4.5 mm (0.18 in.) > Blade depth setting can be locked to assure consistent repetitive operations > Adjustable hook head allows for variation in blade force for harder materials > Stripping action is circumferential, longitudinal and spiral for removal of jacket and insulation > Made in China > Replacement Blade: Part #: > Weight: 159 g (5.6 oz) > Length: 163 mm (6.4 in.) closed > Part #:

35 721/821/921 - Multi-Wire Strippers/Cutters > AWG/mm wire sizes embossed/pad printed on tool > Cushion grips for comfort > Serrated plier-type nose for wire pulls and loops > Handle lock mechanism for compact and protective storage for ease of use with pouch > Wire looping / bending holes conveniently located > Automatic return spring for ease of use and speed > Compact and lightweight with narrow nose design > Black oxide finish for extra corrosion protection > All cutting surfaces are precision formed, hardened, tempered and ground, assuring clean, accurate strips > Made in China > Length: 6.25 in. (159 mm) > Weight: 3.8 oz (107.7 g) Model # Part # Sizes mm/awg mm AWG mm AWG mm AWG

36 103-S Electrical Adjustable Wire Stripper/Cutter With cam adjustment > Strips and cuts insulated wire sizes from #22 AWG (0.65 mm) to #10 AWG (2.6 mm) > Cam adjusts easily to fit wire size > Pressure is against the cam not on the set screw > Opening spring and closing lock feature > Ideal for all applications > Ground and unground versions available > Soft plastic coated handles > Made in Taiwan > Length: in. ( mm) > Weight: 2.5 oz (71 g) > Model 103-S Part #: > Model 103-S Part #: Ground Cutting Surface Adjustable Wire Stripper Cutter > Strips and cuts insulated wire sizes from #22 AWG (0.65 mm) to #10 AWG (2.6 mm) > Effective for stripping / scoring fiber optic jackets and buffer tubing > Stop screw adjusts easily to fit wire size > Ground and unground cutting surface versions available > Soft plastic coated handles > Made in Taiwan > Length: in. ( mm) > Weight: 2.5 oz (71 g) > Also available with opening spring and closing lock feature (Model #101-S) > Model 100 Part #: > Model 100 Part #: Ground Cutting Surface > Model 101-S Part #: > Model 101-S Part #: Ground Cutting Surface 104

37 111-TAS - Thumb Adjustable Wire Stripper/Cutter > Effective for stripping & cutting insulated wire sizes from #22 AWG (0.65 mm) to #10 AWG (2.6 mm) > Scalloped handles ergonomically designed for ease of use and optimum operator comfort > Patented mechanism allows for full range adjustment > Finger operated stop, adjusts easily for manual adjustment of jaws without additional tools > Unique spring mechanism holds the jaws and stripping surfaces in a normally open position, permitting ease of operation in repetitive stripping applications > Once set, the operating pressure is encapsulated between the cam and pivoting tool arm, allowing for maximum operator leverage > All cutting surfaces are precision formed, hardened, tempered and ground assuring clean smooth strips > Made in China > Length: 5.4 in. (137 mm) > Weight: 2.2 oz (62 g) > Part #:

38 Electrical PS 1 Self-Adjusting Wire Stripper > Designed to handle PVC insulated small crosssectional wires up to 1.5 mm 2 (0.062 in.) > Lightweight and compact size ideal for small applications > Allows for precise work with less fatigue > Automatic, self-adjusting stripping action over entire range > Built-in strip stop for consistent strip lengths > Built-in cutter for wire end trimming > Supplied with interchangeable gripping pads to suit different types of insulation > Made in China > Weight: 76 g (2.7 oz) > Dimensions: 155 x 80 x 14 mm (6.1 x 3.1 x 0.6 in.) > Part #: > Replacement Gripping Pads (set of 3): Part #: Application Wire Size Range mm 2 Wire Size Range O.D. Appox. AWG Wire Size Wire Stripping up to 1.5 up to Stranded Solid Wire Cutting up to 1.5 up to Stranded Solid PS 2 Self-Adjusting Wire Stripper > Ideal for production line and electronic / electrical maintenance applications > Comfortable fatigue free shape > Fully self-adjusting with built-in wire cutter, adjustable length stop and variable gripping power > Strips wire without damage to conductor > Robust glassfiber reinforced nylon body with hardened and tempered steel moving component parts insures a long, maintenance free life > Made in China > Weight: 150 g (5.3 oz) > Dimensions: 180 x 70 x 18 mm (7.1 x 2.8 x 0.7 in.) > Part #: Application Wire Size Range mm 2 Wire Size Range O.D. Appox. AWG Wire Size Wire Stripping 0.08 to 6.00 up to Stranded & Solid Wire Cutting Up to 6.00 stranded Copper up to Stranded & Solid 106

39 MK 1F/D - Wire Strippers > Designed for high volume, production environments > Strips 0.25 mm 2 to 2.5 mm 2 PVC insulated wires > Wire Size Range: Up to 0.1 in. (0.25 to 2.5 mm 2) > AWG Wire Size: Stranded or Solid: Up to 14 AWG > Die cast aluminum frame and pressed steel linkages offer a rugged design for production and field use > Automatic, self-adjusting stripping action over entire range > Additional flexibility to adjust for tough or soft insulations, with builtin adjustment dial > Built in strip stop for consistent strip lengths > Made in China > Weight: 240 g (8.5 oz) > Dimensions: 165 x 64 x 16 mm (6.5 x 2.5 x 0.6 in. ) > Part #: > Replacement Stripping Jaw Assembly: Part #: NN - Wire Strippers > The premier precision wire stripper for removing insulation from solid or stranded wire without nicking or scratching the conductor > Nominal conductor diameter range from.0050 to.044 in. > Tool hole diameter range from.008 to.054 in > Tool handle is stamped with identifying hole diameter > Length: in. ( mm) > Weight: 2.5 oz (71 g) > See tables for part number 107

40 Electrical Ordering Guide for NN Wire Strippers Note: NN Wire Strippers replace the No Nik Strippers that are no longer available. AWG Wire Construction Nominal Conductor Diameter in. Nominal Conductor Diameter mm Tool Hole Diameter New Tool Model # New Tool Part # Old Tool Model # Old Tool Part # Old Tool Color Solid NN044W NN Dark Brown Stranded NN054W NN Clear NN034W NN Pink Solid NN037W NN Grey Stranded.035 Solid.0253 Strandad.028 Solid.0201 Stranded.022 Solid.0159 Stranded NN037W NN Grey NN044W NN Dark Brown NN028W NN Black NN031W NN Tan NN031W NN Tan NN034W NN Pink NN023W NN Maroon NN025W NN Light Green NN025W NN Light Green NN028W NN Black NN018W NN Yellow NN021W NN Royal Blue NN021W NN Royal Blue NN023W NN Maroon 108

41 Ordering Guide for NN Wire Strippers Note: NN Wire Strippers replace the No Nik Strippers that are no longer available. AWG Wire Construction Nominal Conductor Diameter in. Nominal Conductor Diameter mm Tool Hole Diameter New Tool Model # New Tool Part # Old Tool Model # Old Tool Part # Old Tool Color Solid Strandad.014 Solid Stranded.011 Solid Strandad.009 Solid NN014W NN Dark Green NN016W NN Orange NN016W NN Orange NN018W NN Yellow NN012W NN White NN014W NN Dark Green NN014W NN Dark Green NN016W NN Orange NN010W NN Light Blue NN012W NN White NN010W NN Light Blue NN012W NN White NN008W NN Red NN010W NN Light Blue Stranded NN010W NN Light Blue 36 Solid NN008W NN Red Stranded NN008W NN Red 109

42 Electrical 60 - Utility Cutter > Cuts stranded wire from #22 AWG (.65 mm) to #12 AWG (2.3 mm) > Utility cutter for plastic, wire and other materials > Perfect for plastic cuffs > Spring mechanism opens tool permitting ease of operation in repetitive functions > All cutting surfaces are precision formed, hardened, tempered and ground > Closing lock feature > Soft plastic coated handles > Made in Taiwan > Length: in. ( mm) > Weight: 2.5 oz (71 g) > Part #: Rural C Line Wire Slitter & Stripper > Heads matched to wire diameter > Used by major telephone installers > Slitting and stripping blades are replaceable > Tools are self-closing for safety > Soft plastic coated handles > Length: 7 in. ( mm) > Weight: 9.5 oz (269 g) Model Part # Wire Diameter Replacement (in.) (mm) Blade GA SL BL (Slitting Blade) 205ST BL (Stripping Blade) GA SL BL (Slitting Blade) 205ST BL (Stripping Blade) * Made in Korea Replacement Blade Part # 80235* *

43 305 - Figure 8 Aerial Self Support Duct Slitting > Messenger removal and jacket slitting tools for round figure-8 aerial duct > Heads matched to messenger sizes > Self closing for safety > Locking latch on MJ and MW tools provides easier slitting action > Replaceable blades > Plastic Grips on handles > Length: 6.5 in. (165 mm) > Weight: 9.0 oz (255 g) Model # Part # Duct Mfr Nominal Duct Maximum Messenger Replacement Blade Blade Part # Messenger Size - mm Covering O.D. - in. 305 AN BL WEB-B BL MW-P Pyramid Hook MW-D Duraline Hook Models for Messenger Jacket Slitting (Slits Messenger Jacket for Removal) Model # Part # Duct Mfr Nominal Duct Maximum Messenger Replacement Blade Blade Part # Messenger Size - mm Covering O.D. - in MJ-P Pyramid MJ MJ-AD Duraline, Amco MJ

44 Electrical 925CS - Splicer s Scissors > Multi-purpose service tool > All exterior surfaces and interior blade surfaces double-plated with chrome over nickel to prevent rust and corrosion the ONLY electrician s scissors that offer this full double protection > Every pair totally thru-hardened for years of service. > Use for splicing wire; cutting harness ties, insulation materials, medium gauge wires, and electrical tape; and stripping insulation. > Stripping notches for 19 and 23 gauge wire > Scraper and file on back of blade > Length: 5.25 in (133 mm) > Weight: 3.2 oz (91 g) > Part #: CS - ERGO - Splicer s Scissors > ERGO Scissors have the same quality features as 925CS > Ergonomic design to minimize hand wrist fatigue > Cushioned handle that nests in the palm of your hand for greater cutting leverage > Length: 7.5 in. (190 mm) > Weight: 3.7 oz (110 g) > Part #:

45 CK6 - Splicer s Knife > Tough, coping-style blade > Forged steel > Full-Size, high-dielectric, yellow-cushioned handle > Provided with a protective blade sheath > Length: 6.25 in. (159 mm) > Blade length: in. (41 mm) > Weight: 2.4 oz (68 g) > Part #: CS - Splicer s Scissors > Complete Kit Contains: 1 CSH 96 Holster 1 925CS Splicer s Scissors 1 CK6 Knife > Kit Dimensions: 8.25 x x 1 in. (210 x 54 x 2.54 mm) > Weight: 7.5oz (213 g) > Part #: Model # Part # Description Full Length Length of Cut 925CS Stripping notches 19 & 23 AWG and one blade serrated 925CS-ERGO Same as 925CS except with ERGO handles 5 in. (127mm) 5 in. (127mm) 1.75 in. (44 mm) 1.75 in. (44 mm) CK Slicer s Knife 6.25 in. (159 mm) 925CS Kit One 925CS Scissor, One CK6 Splicer s Knife and One CSH96 Holster 8.5 in. (216 mm) N/A N/A 113

46 Electronics Specialty Scissors 33 1/4 IS4 1/ C > Precision crafted tools > Perfect for military spec work > Used for cutting harnesses, assembling circuit boards, cutting and tieing laces, and trimming wire for terminals > Needle-sharp points for accuracy and delicate trimming in tight places > Hot-forged fine cutlery steel, double-plated with chrome over nickel, tempered and precision ground for the finest performance > IS4 1/4 is a precise instrument with long blades and needlesharp points for stripping shielding, and cutting light wire for shim stock. High leverage for extra cutting power > 33 1/4 is a high leverage scissor with delicate, extra sharp, curved blades > 384 and 385 have the same features, but vary in overall length and length of cut > 554 has snub-nosed, curved blades, and long, strong handles for cutting wire and filament in limited clearance areas > 564C has one blade serrated to prevent slip-out > See table for part numbers Model # Part # Full Length IS4 1/ /4 in. (108 mm) 33 1/4 (Curved Blades) /4 in. (83mm) in. (102 mm) in. (127 mm) 564C (one blade serrated) in. (102 mm) Length of Cut 3/4 in. (19mm) 1/2 in. (13mm) 1-1/4 in. (32 mm) 1-1/2 in. (38 mm) 3/8 in. (10 mm) 114

47 Tweezers AA-SA 5SA 7SA 7C > AA-SA Strong, fine tips. General purpose tweezer popular for assembly line work. Anti-acid/anti-magnetic stainless steel. Brushed satin finish. > 5SA Needle sharp tips. Excellent for die attaching, wire bonding, and handling miniature parts. Anti-acid/antimagnetic stainless steel. Brushed satin finish. > 7SA Extra fine curved tips for working on miniature assemblies. Curved tips allow hand to rest on work surface for support, which means greater accuracy with less fatigue. Antiacid/anti-magnetic stainless steel. Brushed satin finish. > 7C Same design as the 7SA but made of carbon steel. Chrome plated for extra protection. > 231 General purpose assembly tweezer with serrated inside points. Anti-acid/anti-magnetic stainless steel. Brushed satin finish. > 226 Same design and serrated points as the 231 but made of carbon steel. Chrome-plated for added protection > Weight: 7 oz (198 g) Model # Part # Full Length AA-SA /8 in. (124 mm) 5-SA /4 in. (108mm) 7-SA /2 in. (114 mm) 7C /2 in. (114 mm) /4 in. (121 mm) /4 in. (121 mm) 115

48 Electronics AW/AWG - Anti-Wicking Tools AW Series AWG Series > AW Series: Bullet-shaped head grips conductor, supports insulation > AWG Series: L-shaped head affords greater visibility. Works well in tightly confined solder areas > Precision-made from non-fatiguing copper alloy > Fully chrome-plated for extended life and solder-free operation > Heads drilled to precise tolerances for positive conductor contact and maximum thermal conductivity > Insures compliance with military and NASA specifications on inspection requirements of solder connections when used properly > Reverse action automatically grips conductor > Part numbers give correct AWG size wire that tools are made to fit > Meets all specifications for soldering both single and multi-strand wire > Weight: 7 oz (198 g) Model # Part # Full Length Conductor Contact Length Hole Diameter AW in. (127 mm) 1/16 in (1.59 mm) in. ( mm) AW in. (127 mm) 1/16 in (1.59 mm) in. / mm AW in. (127 mm) 1/16 in (1.59 mm) in. / mm AW in. (127 mm) 1/32 in. (.79 mm) in. / mm AW in. (127 mm) 1/32 in. (.79 mm) in. / mm AW in. (127 mm) 1/32 in. (.79 mm) in. / mm AW in. (127 mm) 1/32 in. (.79 mm) in. / mm AWG /2 In. (114 mm) 1/16 in. (1.59 mm) in. / mm AWG /2 In. (114 mm) 1/16 in. (1.59 mm) in. / mm AWG /2 In. (114 mm) 1/16 in. (1.59 mm) in. / mm AWG /2 In. (114 mm) 1/32 in. (.79 mm) in. / mm AWG /2 In. (114 mm) 1/32 in. (.79 mm) in. / mm AWG /2 In. (114 mm) 1/32 in. (.79 mm) in. / mm AWG /2 In. (114 mm) 1/32 in. (.79 mm) in. / mm 116

49 Desoldering Guns DSG MINI AS MIni Antistatic De-soldering Tool DSG PRM De-soldering Tool fitted with micronozzle DSG 587 AS The antistatic version of the DSGPRM VALUVAC 574 AS Black antistatic plastic bodied VAL-U-VAC with PTFE nozzle FLEXIVAC 2006 Black plastic bodied VAL-U-VAC with the flexi nozzle FLEXIVAC position antistatic FLEXIVAC with the flexi nozzel FLEXIVAC 2009 (39466) X X X FLEXIVAC 2006 (39463) X X X VALUVAC 574 AS (39461) X X X DSG AS (39459) X X X DSG 587 AS (39467) X X X Product/Part # DSG PRM 587 (39455) X Body Aluminum Body Plastic Anti-Static Nozzle PTFE Nozzle Silicone Rubber A. Dimensions (mm) B. Dimensions (mm) C. Dimensions (mm) D. Dimensions (mm) E. Dimensions (mm) Weight (g) Spare Nozzles (x5) Neoprene Washers (x10) > Complete range of professional quality desoldering tools for solder removal > Tools feature PTFE or silicon rubber nozzles (see below) > Extraction springs located outside the vacuum chamber to prevent solder sticking and promote long life > Anti-static gun versions feature carbon impregnated tips and polished aluminum bodies to provide conduction from the desoldering point through to the operator (some plastic bodies, see below) > Made in China 117

50 Electronics Softy Ant-Static Disposable Work Mat > Cushioned surface protects delicate assemblies and expensive work surfaces > Make small parts handling easier and quicker > Inexpensive and disposable > Anti-static and free from contamination > Depress easily to give tools a sure grip on parts > Backing is non-slip, even on smooth glass > Will not put carbon into the atmosphere > Can be cleaned with soap and water without affecting their anti-static quality > Available in two sizes of mats or rolls > Surface restivity ohms/sq > Meets DOD-STD-1686 for anti-static material > Meets DOCFF1-70 test for flammability > Made in U.S.A. Model # Part # Size Packaging M11 White in. x 14 in. (279 mm x 356 mm) M14 White in. x 22 in. (356 mm x 559 mm) R22 White in. Width (559 mm) Single Single 180 (55 m) per roll 118

51 RFNP/RFNP-S - Flat Nose Pliers > ESD Safe and ergonomic slip free dual-compound thermoplastic grips for maximum comfort and durability > Smooth wide jaws for fine assembly applications s > Drop-forged, hardened and tempered steel alloy, designed for maximum strength and performance > Pliers are suitable for work on ESD work stations in accordance with IEC surface resistance ohms/sq > Made in Germany > See table for part numbers Model Part # Weight Length RFNP-S Short Nose Pliers RFNP Long Nose Pliers oz (61 g) 5.1 in (130 mm) oz (89 g) 5.7 in (145 mm) 85 - Long Nose Pliers > Perfect for precision assembly work > Ideal for mechanics, technicians and hobbyists > Spring closing action holds parts so they don t slip during assembly > Soft plastic coated handles > Length: 9.25 in. ( mm) > Handle Width: 5.1 in., 130 mm > Tip Width;.25 in. (6.35 mm) > Weight: 77 g, 2.7 oz > Part #:

52 Telecom PDT - Punch Down Tool > This spring-loaded adjustable, automatic impact tool is used for terminating wires on 110/88 or 66 type connecting blocks > Precision hardened and interchangeable blades spread the termination prongs to allow fast and easy insertion of the wire into the contact, providing a tight termination that resists corrosion. The blade finishes the job in the same motion by neatly cutting off excess wire > Accepts a variety of interchangeable blades > No screwdriver is needed to change the blades > The impact of the blade can be adjusted simply by turning a thumb wheel > Convenient storage compartment with a unique locking mechanism provides storage for spare blades > Made in Taiwan > Length: 5.75 in. (146 mm) > Weight: 5.1 oz (145 g) > Part #: > Replacement Blades: 110/88 Part #: 46268: 110/66 Part #: RJC - RJ Crimping Tool > Crimps RJ10, RJ11, RJ12, RJ22 and RJ45 modular connectors (4P, 6P, 8P) > Comfortable and ergonomic plastic grips > Wire cutter and jacket stripper built into tool body > Easy release ratcheting mechanism for ease of assembly > Ratchet mechanism can be released mid-cycle > Made in Taiwan > Length: 7-3/4 in. (197 mm) > Weight: 12 oz (340 g) > Part #: > Replacement Blades: Part #:

53 BTC - BT/RJ Crimping Tool > Crimps British Telecom 630A/631A modular connectors > Crimps RJ11, RJ12 & RJ 45 connectors > Comfortable and ergonomic plastic grips > Wire cutter and jacket stripper built into tool body > Easy release ratcheting mechanism for ease of assembly > Ratchet mechanism can be released mid-cycle > Replacement Blades (package of 2) Part No: > Length: 197 mm (7-3/4 in) > Weight: 340 g (12 oz) > Made in Taiwan > Part #: Smart-Strip - Data Cable Stripper > Versatile and compact tool suitable for all types of standard insulation > Smart-Strip produces an accurate depth of cut to any standard insulated size of wire or cable in the 0.03 to 0.39 in. ( mm) range > Strips UTP & STP data network cable > Detailed depth adjustment mechanism allows the operator to change settings across standard insulations and a variety of delicate and irregular shielded multicore cables > Spring loaded action > Fixed depth version also available > Made in China > Weight: 1.4 oz (40 g) > Dimensions: 3.8 x 0.75 x 1.5 in. (97 x 19 x 38 mm) > Part #:

54 Telecom LDT-UTP - UTP Jacket Trimmer > LDT-UTP is used for stripping the jacket on CAT5, CAT5E and CAT6 UTP/STP cables > Molded blade cassette ensures precise jacket stripping with no nicking/scoring of the twisted pair conductors > Factory pre-set cassette blades require no adjustment by the installer > Note: Tool is not intended for Plenum Series Cable construction > Made of Chinese and American Parts > Engineered in the U.S.A. > Length: 4 in. (102mm) > Weight: 0.8 oz (23g) > Part #: DDT-UTP - UTP Jacket Trimmer > DDT-UTP combo design is used for stripping the jacket on CAT5, CAT5E, CAT6 and the larger O.D. 10G types of UTP/STP cables > Molded blade cassette ensures precise jacket stripping with no nicking/scoring of the twisted pair conductors > Factory pre-set cassette blades require no adjustment by the installer > DDT combo model reduces the number of tools required to prepare various sizes of twisted pair (UTP/STP) cable > Note: Tool is not intended for Plenum Series Cable construction > Made of Chinese and American Parts > Engineered in the U.S.A. > Length: 3.63 in. (92mm) > Weight: 2 oz (57g) > Part #: