FO Trunk Cable. FO Trunk Cable
|
|
- Francine Melinda Morton
- 5 years ago
- Views:
Transcription
1 5 FO Trunk Cable FO Trunk Cable u 2 to 144 fibers u Various cable types u PC and APC polish u Tuned connectors u Gradations as desired u Up to IP67 u etc. 104
2 05 FO Trunk Cable Contents FO Trunk Cable Page FODH/1-Distribution System 106 FODH/2-Distribution System 107 FODH/E-Distribution System 108 FOCT-Distribution System 109 MTP -Cable and Connector Systems 110 Service Reel 111 Trunk cable FO FO- Trunk Cable 105
3 FODH / 1 Fiber Optic Trunk Cable / Variant 1 The robust FO distribution system for industry and outdoor applications: corresponds to IP44 degree of protection and is optionally waterproof up to IP67 for manual and mechanical pulling with tractive forces up to 500 N features cast aluminium distributor head with step-resistant, watertight corrugated cable tube which protects the assembly and also assists in pulling cable and as a buffer against jerky tensile loads protective hose is screwed onto distributor head yet not attached to the fibers Advantages: Mounting in a housing opening Stepped whip length: 5cm each All common types of connectors like LC, SC, ST, FC or E2000 Avaible in PC or APC polish All types avaible with Kevlar reinforced 1.8mm Fan-outs or with 0.9mm Fan-outs FR-LSOH Kevlar reinforced colored Fan-outs: Fiber typical OS2: yellow; OM2: black; OM3: aqua; OM4: violet; Each with colored rings according to IEC60304 Colored 0.9mm Fan-outs according to IEC60304 Special designs according to customer specifications possible Dimensions and mounting data for SC, ST, FC, E2000, LC connectors: Fibers Length of splitter 90 mm 101 mm 140 mm 140 mm Ø Splitter 25 mm 33 mm 56 mm 56 mm Ø Protective hose 33 mm 43 mm 56 mm 65 mm Connector lengths* shortest fan-out 550 mm 550 mm 550 mm 550 mm longest fan-out (for max. number of fibers) 800 mm 1300 mm 1700 mm 1700 mm * for standard length gradation of 50 mm, ensuring the most compact design possible. Special assemblies per customer specifications are available. Dimensions are approximate figures. OM4 OM3 OS2 106
4 FODH / 2 Fiber Optic Trunk Cable / Variant 2 The FO distribution system for the widest variety of installations. The system is robust and known for its ease of installation: simply feed in the cable, open the red clip, remove the hose and connect the plug. Done! robust design handles the widest variety of installation environments IP20 features aluminum distributor head up to 144 fibers protective hose disconnects via red attachment clip, which can be removed in seconds fan-outs are impervious to dust and are housed in non-bendable corrugated hose which also assists in feeding in cable and acts as a buffer against jerky tensile loads Advantages: Mounting in a housing opening Stepped whip length: 5cm each All common types of connectors like LC, SC, ST, FC or E2000 Avaible in PC or APC polish All types avaible with Kevlar reinforced 1.8mm Fan-outs or with 0.9mm Fan-outs FR-LSOH Kevlar reinforced colored Fan-outs: Fiber typical OS2: yellow; OM2: black; OM3: aqua; OM4: violet; Each with colored rings according to IEC60304 Colored 0.9mm Fan-outs according to IEC60304 Special designs according to customer specifications possible FODH/2 can be installed in the FODH component rack (special stepped 1.8m Fan-out) in subrack (page 162) by using the FODH slot module (page 164). Dimensions and installation data for FO connectors: Fibers Length of splitter 64 mm 64 mm 64 mm Ø Red clip 36 mm 42 mm 50 mm Ø Protective hose 28.5 mm 35 mm 42 mm Connector lengths* shortest fan-out 550 mm 550 mm 550 mm longest fan-out (for max. number of fibers) * for standard length gradation of 50 mm, ensuring the most compact design possible. Special assemblies per customer specifications are available. Dimensions are approximate figures. 800 mm 1400 mm 1700 mm OM4 OM3 OS2 Trunk cable FO 107
5 FODH / E Fiber Optic Trunk Cable / Variant E The FO distribution system for smaller installations and narrow feeds. This Eco variant is based on a plastic distribution head and is the slimmest and lightest in the EasyLan product range. for small installation environments IP20 plastic distribution head up to 24 fibers maximum diameter of 28.5 mm fan-outs fed in buckle-free corrugated hose Advantages: Mounting in a housing opening Stepped whip length: 5cm each All common types of connectors like LC, SC, ST, FC or E2000 Avaible in PC or APC polish All types avaible with Kevlar reinforced 1.8mm Fan-outs or with 0.9mm Fan-outs FR-LSOH Kevlar reinforced colored Fan-outs: Fiber typical OS2: yellow; OM2: black; OM3: aqua; OM4: violet; Each with colored rings according to IEC60304 Colored 0.9mm Fan-outs according to IEC60304 Special designs according to customer specifications possible FODH/2 can be installed in the FODH component rack (special stepped 1.8m Fan-out) in subrack (page 162) by using the FODH slot module (page 164). Dimensions and installation data for FO connectors: Fibers 2 24 Length of splitter Ø Splitter Ø Protective hose Connector lengths* shortest fan-out longest fan-out (for max. number of fibers) 69 mm 26.1 mm 28.5 mm 550 mm 1100 mm * for standard length gradation of 50 mm, ensuring the most compact design possible. Special assemblies per customer specifications are available. Dimensions are approximate figures. OM4 OM3 OS2 108
6 FOCT Distribution System Connectors assembled directly onto the cores, offering the following advantages: ease of follow-on handling, slim build and cost-effective. The pre-assembled cores can be quickly and securely connected with couplings, eliminating the need for splicing and on-site assembly. As with all our FO trunks, the manufacturing process is carried out under laboratory conditions using cutting-edge technology. PC and APC polish, plus tuned connectors Connectors: SC, ST, FC, E2000, LS, etc. Break-out or mini break-out cable Extra-slim build Pre-assembled with all major connector types One-side / dual-side assembly Graduated fibers Up to 24 fibers Fiber To The Desk Fitted with transparent protective hose, depending on version Environmentally friendly transport packaging Additional labeling upon request (e.g. floor, room number etc.) Optimal system packaging ensures safe transport. The roll can be left in the packaging during subsequent wiring efforts - simply open the perforated lid on the side of the box and use the box to assist in unrolling cable. Upon request, trunk cables can be sorted per your specifications and packaged on a pallet. Trunk cable FO 109
7 MPO Cable The MPO cables have been specially designed for the high demands placed on packing density, making reversible and space-saving FO cabling possible in data centers. The various fiber quality levels are designated by different colored plugs. Properties: 4, 8, 12 or 24 fibers Spring-loaded ferrules PushPull locking PC and APC polish Additional lettering on request (e.g. room number etc.) Application: Data center Plug & Play fiber optic installation Backbone cabling Description Multimode Multimode Singlemode MTP Multifiber connector type MTP Elite PC 0 MTP Elite PC 0 MTP Elite APC 8 Color MTP housing turquoise magenta yellow I L insertion loss typ db / max db typ db / max db typ db / max db R L return loss typ. > 35 db / min. 25 db typ. > 35 db / min. 25 db typ. > 65 db / min. 55 db Polarity Method A / B / C Method A / B / C Method A / C Color single plug housing turquoise magenta Blue (LC) / green (LC APC) Norm IEC IEC IEC Temperature range ( C) -40 to to to +80 Mating cycles
8 Service Reel No company should be without a service reel to handle emergency situations and to bridge potential outages in the event of service work, maintenance and repair efforts. We offer you various configurations: from small hand rolls to convenient trolleys. A high-quality Fiber Optic Distribution Head (FODH) with graduated connector lengths is assembled on the roll-out side. Prior to installation, the connectors are protected from external influences in a waterproof (IP67) installation hose which protects against excessive pulling and lateral pressure. The internal cable end is connected to adapters and is assembled in a dust-impervious, bumpresistant housing (IP50). High-quality materials and the EasyLan distribution system ensure long service life. Custom solutions are developed according to your specifications. Range of Application: Construction of replacement connection in the event that FOC links fail due to damage. Here, the reel is brought to the network distribution cabinet and the cable is drawn to the opposite end using the installation box. Active components are connected via FO adapter cables. In general, installation is possible in any logistics and manufacturing environment in which FO has been laid in ducts. Trunk cable FO 111
Opt-X Enterprise Fiber Trunk Cables
APPLICATION Factory-terminated and tested fiber trunk cables connect central patching locations to zones or pods. Available terminated with both modular (MTP ) and discrete connectors, these trunks are
More informationOur Most Important Connection is with You. OSIS SECTION 7. OSIS Series
SECTION 7 OSIS OSIS Series Contents Introduction : One Step Interconnect Solution...7-3 Applications...7-3 International Standard Documents Compliance...7-3 Features and Benefits...7-3 Characteristics
More informationCONTENTS. Introduction Characteristics Product range. Pages
R2CT TM Series R2CT CONTENTS R2CT TM Pages Introduction... 9-4 Characteristics...9-5 Product range R2CT TM standard plug kit...9-6 R2CT TM mini short plug kit... 9-7 R2CT TM standard receptacle...9-8 R2CT
More informationMTP Multi Lite Trunk Assemblies
MTP Multi Lite Trunk Assemblies MTP Multi-Lite Trunk assemblies are a neat solution for providing up to four MTP -MTP links within a compact, high density ruggedised cable. The cable construction consists
More informationOSIS by Radiall One Step Interconnection Solution
FIBER OPTIC AND MULTISIGNAL APPLICATIONS OSIS by Radiall One Step Interconnection Solution Introduction The easiest outdoor interconnection solution: in only one click! To meet the requirements of telecommunication
More informationData Center & Cloud Computing Infrastruture Solutions DATASHEET. MTP/MPO-LC Breakout Cable Aseemblies High Density Cabling System
Data Center & Cloud Computing Infrastruture Solutions DATASHEET MTP/MPO-LC Breakout Cable Aseemblies High Density Cabling System REV.2.0 2018 MTP/MPO Breakout Cable 01 Description MTP/MPO breakout assemblies
More informationPlug & Play Universal Systems
100G Ready performance Maximum skew of 0.75 ns Product is assured to work in parallel optic applications for Ethernet, Fibre Channel and InfiniBand MTP /LC Duplex Module TRAINING SPLICE EQUIPMENT High-density
More informationEDGE Solutions Trunk Cable, SMF-28 Ultra OS2, MTP to MTP, 12 fibres
EDGE MTP trunks are preterminated cables with 12 -fibre MTP connectors or LC duplex connectors on either side. The trunks build up the major skeleton of the passive network infrastructure, and thanks to
More information1 : LC/PC 0 : None S : Simplex 09 : 0.9mm G : Green W : White. A : LC/APC S : SM D : Duplex 20 : 2.0mm L : Blue. M : MM 30 : 3.
LC Connector The LC connector was the first small form factor connector on the market. The use of a high performance 1.25 mm ferrule gives the connector extremely high performance characteristics. The
More informationLX.5 (SFOC 1.25) High packing density. High performance. High reliability. High safety. High flexibility
Today, packing density is more important than ever. The LX.5- connector, based on the proven 1.25 mm ferrule technology, is the only standardized small form factor connector combining high packing density,
More informationLX3 High Density LGX 1U Patch Panel
LX3 High Density LGX 1U Patch Panel An innovative 1U, 19 rack mountable patch panel, designed for use in high density applications. It offers management of up to 144 fibres using MTP optical cassette modules
More informationDIGITUS Fiber Optic Splice Box, 1U, basic housing, color grey (RAL 7035) or black (RAL 9005)
DIGITUS Fiber Optic Splice Box, 1U, Basic Housing Basic housing for splice box assembly Sturdy housing Sliding Available in colors grey and black Abstract DIGITUS Fiber Optic Splice Box, 1U, basic housing,
More informationPlug & Play Universal Harness, SMF-28 Ultra Single-mode (OS2)
Plug & Play Universal Systems Harnesses have a pinned (male) MTP connector on one end that connects to a Plug & Play Universal Systems trunk or extender trunk, while the other end is equipped with single
More informationProduct information 19" 1U UniRack2 24xLC-Duplex G.652.D, PC, ceramic, C/2 R819330
Product information 19" 1U UniRack2 24xLC-Duplex G.652.D, PC, ceramic, C/2 R819330 1 Pcs. 19" 1U slide-in unit, splice tray plate with 2 splice trays radius 40 mm, fastening material, labeling strips and
More informationPretium EDGE Solutions Trunk Cable, OM3, Low-Loss, MTP to MTP, 24 fibres
Corning LANscape Pretium EDGE (Evolved-Density, Growth -Enabled) solutions are high -density preterminated optical cabling systems that simplify installation and improve performance in data centre environments.
More informationHDCi LX3 High Density 4U Patch Panel
HDCi LX3 High Density 4U Patch Panel An innovative 4U, 19 rack mountable patch panel, designed for use in high density applications. It offers management of up to 576 fibres using MTP optical cassette
More informationPlug & Play Universal Systems
Corning Cable Systems Plug & Play Universal Systems create a fiber optic tip-to-tip solution for data centers and storage area networks (SANs) consisting of housings, modules, panels, harnesses, trunks
More informationHDCi LX3 High Density 1U Patch Panel
HDCi LX3 High Density 1U Patch Panel An innovative 1U, 19 rack mountable patch panel, designed for use in high density applications. It offers management of up to 144 fibres using MTP optical cassette
More informationProCliCk Pre-Polished ConneCtors
ProCliCk Pre-Polished ConneCtors Termination Insert fiber and activate clamp in one simple motion. Precision Low Loss, High Yield Pre-Polished Connector Terminate in Less than 60 Seconds CSI, Drawings
More informationEDGE Solutions Trunk Cable, OM4, Low- Loss, MTP to MTP, 12 fibres
EDGE MTP trunks are preterminated cables with 12 -fibre MTP connectors or LC duplex connectors on either side. The trunks build up the major skeleton of the passive network infrastructure, and thanks to
More information8Fiber Optic Distribution Systems
8Fiber Optic Distribution Systems 144 08 Fiber Optic Distribution Systems Contents FO Patch Panel / Splice Housing (fixed installation) Page FO patch panel fixed OVB 19" 1U 146 FO splice housing fixed
More informationData Center & Cloud Computing Infrastructure Solutions DATASHEET. MTP/MPO-LC/SC Cassette High-density Pre-terminated Modular Cassette System
Data Center & Cloud Computing Infrastructure Solutions DATASHEET MTP/MPO-LC/SC Cassette High-density Pre-terminated Modular Cassette System REV.1.0 2018 MTP MPO Cassette 01 Description FS.COM Fiber Optic
More informationProduct information 19" 1U UniRack 24xLC-Duplex OM4, PC, ceramic, Bm/3 R816749
Product information 19" 1U UniRack 24xLC-Duplex OM4, PC, ceramic, Bm/3 R816749 1 Pcs. Front panel with staggered arrangement of adapters. 19" 1U slide-in unit, splice tray plate with 2 splice trays radius
More informationDIAMOND Fiber Optic Components
DIAMOND Fiber Optic Components CABLE ASSEMBLIES AND ADAPTERS E-2000 Simplex PC/APC MULTIMODE PC Constant innovation in the field of fiber optics has created demand for products with ever increasing performance
More informationMTP Outdoor Cabling System
The AFL MTPE (MTP Elite) Low Loss outdoor cabling system offers a market leading, low loss, fast and efficient connection system for underground (UG) and outside plant applications. These assemblies offer
More informationOutstanding MTP cabling efficiency for your data center PreCONNECT OCTO: Less fibers, more performance. OPTICAL SOLUTIONS & INFRASTRUCTURE
Outstanding MTP cabling efficiency for your data center : Less fibers, more performance. OPTICAL SOLUTIONS & INFRASTRUCTURE Digitalization is confronting organizations and companies with significant challenges,
More informationAccelerating Light STAR. Data Center High Density Connectivity Solution
Accelerating Light STAR Data Center High Density Connectivity Solution STAR High Density Connectivity Solution STAR is a cost-effective modular solution that harnesses ultra-high density pre-terminated
More informationFAS-NET MPO Solution. Benefits of FAS-NET MPO Fiber Optic Solution:
Stable and Reliable Data Communication Solutions from Infinique Infinique has designed and developed quality product with affordable pricing for communication infrastructure solutions. This position has
More informationDIAMOND Fiber Optic Components
DIAMOND Fiber Optic Components E-2 Compact & Duplex CABLE ASSEMBLIES AND ADAPTES SINGLE MODE PC/APC MULTIMODE PC The E-2 COMPACT and DUPLEX combine the optical and mechanical performances of the E-2 simplex
More informationEDGE8 MTP Trunk Cable
The EDGE8 trunks utilise 8 -fibre push/pull optical connectors that are pinned on both ends of the cable. The trunks are shipped with strain -relief clips that allow for tool -less installation in EDGE8
More informationThe OpDAT Wall Distributor is a distributor for universal use in floor cabling or as a building distribution point in the equipment room.
Product information Page 1/10 Illustration splice VIK closed Product description Properties: Wall-mount housing with two lockable swing doors, two different locks to separate network and building cabling.
More informationLC Connector. A High Density Fiber Optic Network Solution. Paul Kolesar Lucent Technologies, Bell Laboratories
A High Density Fiber Optic Network Solution Paul Kolesar Lucent Technologies, Bell Laboratories IEEE 802.3z Gigabit Ethernet March, 1997 Outline Design Background and Goals Product Family Overview Features
More informationPretium EDGE HD Solutions A LANscape Pretium Solutions Product
Pretium EDGE HD Solutions for Enterprise Data Centers and Storage Area Networks Corning Pretium EDGE HD solutions create a fiber optic tip-to-tip solution for data centers and storage area networks (SANs)
More informationPRE-TERMINATED SOLUTION GUIDE
PRE-TERMINATED SOLUTION GUIDE About A global leader in fiber optic technology, AFL Hyperscale brings together over 70 years of design and manufacturing expertise to create next generation, end to end
More informationEC Series LC Connectors
EC Series LC Connectors Amphenol s data communications EC Series fiber optic LC small form factor (SFF) connectors utilize the familiar RJ-45 latching mechanism. The LC connector is almost half the size
More informationFMT4S. High Density Connectivity Solution
FMT4S High Density Connectivity Solution 2 FMT4S Solution Illustration FMT4S Optical Distribution Frame (ODF) FMT4S series is an advanced ODF series offering premium quality Data Center connectivity solution.
More informationPreCONNECT OCTO PRODUCT INFORMATION
PreCONNECT OCTO PRODUCT INFORMATION Applications Infrastructure and IT room cabling within data centers System consists of: Factory assembled OFNR Riser or OFNP Plenum rated n x 8 fiber Microunit Breakout
More informationHIGH DENSITY DATA CENTER CABLING GUIDE. Optics DACs Cables Cable Management Fiber TAPs Media Converters
HIGH DENSITY DATA CENTER CABLING GUIDE Optics DACs Cables Cable Management Fiber TAPs Media Converters PROVIDING MTP CABLING SOLUTIONS FOR THE SMART DATA CENTER. APPROVED NETWORKS SETS THE STANDARD The
More informationPreCONNECT DUODECIM PRODUCT INFORMATION
DUODECIM PRODUCT INFORMATION Applications Infrastructure and IT room cabling within data centers System consists of: Factory assembled FO breakout and loose tube cables, FRNC-LSZH indoor cables, up to
More informationPretium EDGE Solutions Trunk Cable, 50 µm multimode (OM3)
Pretium EDGE 133 Pretium EDGE Solutions Trunk Cable, 50 Pretium EDGE Solutions trunk cables utilize the MTP Connector, a 12 -fiber push/pull optical connector with a footprint similar to the SC simplex
More informationFIBRE ENCLOSURES AND SPLICING ACCESSORIES
F/ F/ Assemblies, 8.0 W W W. S I E M O N. C O M SECTION CONTENTS Rack Mount Interconnect Centre.............. 8. 8. Wall Mount Interconnect Centre...............8. 8.5 F/ Mini Wall Mount Interconnect Centre...............8.5
More informationData sheet OpDAT PA patch panel unequipped for 12xSC-D/LC-Q/ST-D, gray
Illustrations Dimensional drawing Page 1/6 See enlarged drawings at the end of document Product specification 19 inch 1RU fiber optic patch panel with pull-out splice tray / front cover splice tray can
More informationDIAMOND Fiber Optic Components
DIAMOND Fiber Optic Components CABLE ASSEMBLIES AND ADAPTERS MFS & Fan-Out cords PC/APC MULTIMODE PC The Diamond Multiple Fiber System (MFS)combines Diamond`s advanced polishing technology and the flexibility
More informationPreCONNECT BREAKOUT PRODUCT INFORMATION
PreCONNECT BREAKOUT PRODUCT INFORMATION PreCONNECT BREAKOUT Trunk Highly modular SMAP-G2 19 Distribution Panels Classical 19 1 and 2 HU Distribution Panels, fixed installation and telescopic complete pullout
More informationFEATURED PRODUCTS SC & LC MINI BOOTS LC-HD TOP ADAPTER XP-SERIES LC SWITCHABLE UNIBOOT IP-SERIES LC-KEYED FLEX BOOTS PLC-WDM
LC-HD FEATURED PRODUCTS SC & LC MINI BOOTS SC & LC TOP ADAPTER IP-SERIES LC SWITCHABLE UNIBOOT XP-SERIES LC-KEYED SC & LC FLEX BOOTS PLC-WDM LC-HD CONNECTOR LC HD HIGH DENSITY CONNECTOR The SENKO LC-HD,
More informationPlug & Play Universal Low-Loss Systems A LANscape Pretium Solutions Product
Applications Data Center LAN/SAN Enterprise Building Backbone -to-the-desk Description Plug & Play Universal Systems are preterminated optical fiber cabling systems designed to dramatically improve performance
More informationPretium EDGE Solutions Harness, 12 fibres,
Corning Cable Systems LANscape Pretium EDGE (Evolved -Density, Growth -Enabled) Solutions are high density pre -terminated optical cabling systems that simplify installation and improve performance in
More informationOptical Fiber Systems. Optical Fiber. Premise Connectivity Systems S Y S T E M S
Premise Connectivity Systems Optical Fiber S Y S T E M S w w w. s i g n a m a x. c o m High-Density Rack-Mount Optical Fiber Enclosures Rack-Mount Optical Fiber Distribution Enclosures Rack-Mount Optical
More informationC o n n e c t o r s C h a p t e r 183
Connectors Chapter 5 183 Connectors Contents Copper RJ45 FAMILY 700A8 185 LC FAMILY LC Connectors 186 LazrSPEED 189 LC Couplings 190 SC FAMILY SC Connectors 191 SC Connector Clip 192 SC Couplings 193 ST
More informationPretium EDGE Solutions Trunk Cable, OM4, Low-Loss, MTP to MTP, 24 fibres
Corning Cable 143 Pretium EDGE Solutions Trunk Cable, OM4, Corning Cable Systems LANscape Pretium EDGE (Evolved -Density, Growth -Enabled) Solutions are high density pre -terminated optical cabling systems
More informationConnector SPECIFICATION SINGLEMODE MULTIMODE. 126μm +1/-0 Concentricity: 1μm. 127μm 125μm +1/-0 Concentricity: : 1μm
24 LC-UPC Unibody BTW Boot 2.0mm Round Connector Insertion Loss 0.08dB typical UPC 0.10dB typical APC 0.15dB typical 0.04dB typical Super Low Loss 55dB typical UPC 65dB typical APC Durability < 0.2dB typical
More information1U Multi-Function Fibre Enclosure
FEATURES AND SPECIFICATIONS Features and Benefits The is a configurable rack mount unit for storing and terminating incoming fibre cable. The fibre enclosure has been designed to accommodate various termination
More informationUltra High Density Fiber Enclosure
LightStack Ultra High Density Fiber Enclosure As today s high density Data Centers migrate from 10 to 40 and 100 gigabit speeds, they require low loss fiber connectivity to support multiple mated connections
More informationData centre Cabling Product overview. Flexible and future-proof solutions for data centres TRADITION INNOVATION PASSION
Data centre Cabling Product overview Flexible and future-proof solutions for data centres TRADITION INNOVATION PASSION Contents page System solutions from a single source 3 Each solution has its own advantages
More informationODB 54 Optical Distribution Box IP54
Unlimited Possibilities in Fiber Optic Cabling IP54 IP54 LWL FTTx DataVoice ODB 54 Optical Distribution Box IP54 Less Fuss. More Flexibility. Universal Application. Wherever glass fiber connections have
More informationSPEC SHEET. Multimode Patch Cords and Pigtails. Cable types. Description. Features. Fiber types
Multimode Patch Cords and Pigtails SPEC SHEET Description ADC KRONE offers a wide array of multimode fibre optic patch cords featuring Riser and LSZH cables in various diameters. ADC KRONE s multimode
More informationOMEGA MODULAR PATCH PANEL EMPTY ENCLOSURE
OMEGA MODULAR PATCH PANEL EMPTY ENCLOSURE The Omega MPP enclosure is based on a 19" frame, with 4 empty module slots for MPP modules. Highly flexible : any mix between twisted pair and optical fiber modules.
More information1U Multi-Function Fibre Enclosure
FEATURES AND SPECIFICATIONS Features and Benefits The is a configurable rack mount unit for storing and terminating incoming fibre cable. The fibre enclosure has been designed to accommodate various termination
More informationOPTICAL CABLE & CABLE ASSEMBLY
OPTICAL CABLE & CABLE ASSEMBLY FIBER OPTIC INDOOR CABLE MM 50 m (OM2) MULTI LOOSE TUBE CABLE Indoor Thight Buffer LSOH, 4 core NVLINMM2004LSOH MM 62.5 m MM 50 m (OM2) MM 50 m (OM3 550+/ OM4) Direct Burial
More informationTABLE OF CONTENTS INTRODUCTION 2 BOTS 3 CABLES BULKHEADS 15 MOUNTING BRACKETS 19 ACCESSORIES 23 CUSTOM PROJECTS 25. Cable Types 10.
CATALOGUE TABLE OF CONTENTS INTRODUCTION 2 BOTS 3 CABLES Cable Types 10 Cable Adaptors 13 BULKHEADS 15 MOUNTING BRACKETS 19 ACCESSORIES 23 CUSTOM PROJECTS 25 With fibre optics becoming the absolute foundation
More information3M Passive Optical Splitter Shelves and Modules
Communication Markets Division 3M Passive Optical Splitter Shelves and Modules 3M offers a robust portfolio of passive optical fiber splitter products made to enable easy configuration, design, ordering,
More informationFO Field Genuine alternative to splicing
FO Field Genuine alternative to splicing Get more Flexibility Cabling freedom Efficiency Easy mounting Reliability Long-term stability Flexibility. Cabling freedom. Start independently Freedom in fiber
More information02. PushPull CONNECTORS
. CONNECTORS A distributed automation system does not contain any central automated control cabinets. Controls, sensors and actuators are designed for a high degree of protection (IP 65 / IP 67) and are
More informationUltra High Density Fiber Enclosure
SS_LightStack_G.qxp_G 6/15/17 3:56 PM Page 1 LightStack Ultra High Density Fiber Enclosure As today s high density Data Centers migrate from 10 to 40 and 100 gigabit speeds, they require low loss fiber
More informationLC Adapters and Cable Assemblies
LC Adapters and meet the growing demand for small form factor, high-density fiber optic connectivity with simplex, duplex, single-mode and multimode options. LC connectors reduce space requirements by
More informationSM 126μm SM 125.5μm MM 230μm MM 144μm
LC PREMIUM Connector 931, 932 Series LC PREMIUM UNIBODY GR 326 CERTIFIED 900µm MINI Boot CONNECTOR FERRULE TYPE HOUSING BOOT TYPE BOOT COLOR 931 LC Unibody Simplex 153 SM: Premium 125µm 1 SM: Blue B MINI
More informationEthernet cabling. B Ethernet cabling. Ethernet cabling overview B 2. Cabling 4-poles IP 20 B.1 8 IP 65 / IP 67 B Cables B Tools B.
Ethernet cabling Contents Page B Ethernet cabling Ethernet cabling overview B 2 Cabling 4-poles B.1 8 B.1 22 Cables B.1 96 Tools B.1 104 Cabling 8-poles B.2 8 B.2 20 Cables B.2 90 Tools B.2 98 B 1 Profile
More information02. PushPull CONNECTORS
. CONNECTORS A distributed automation system does not contain any central automated control cabinets. Controls, sensors and actuators are designed for a high degree of protection (IP 65 / IP 67) and are
More informationFTTX Fiber Optic Cabinet Packages Priority Electronics USA
Priority Electronics USA Priority Electronics Ltd Application Hoffman FTTX enclosures are designed to protect and manage fiber optic cable for broadband delivery in outdoor applications. Constructed with
More informationLC Connectors and Adapters
, Adapters and Cable Assemblies meet the growing demand for small form factor, high-density fiber optic connectivity with simplex, duplex, singlemode and multimode options LC connectors reduce space requirements
More informationApplications Engineering Notes. The US Conec MTP Multifiber Connector
Applications Engineering Notes Document Title Document Number The US Conec MTP Multifiber Connector AEN-1909 Revision Number Rev 2.0 Effective Date June 1, 2008 1.0 Document Purpose The purpose of this
More informationSiemon PON Fiber Cabling Solutions
Siemon PON Fiber Cabling Solutions WWW.SIEMON.COM 8 Siemon Enterprise PON Fiber Cabling Solution Siemon Enterprise Passive Optical Network (PON) Fiber Cabling Solution improves the modularity, flexibility
More informationSmart and simple cabling solutions. Patchcords & preterminated links Accurate solutions for tailored cabling
Smart and simple cabling solutions Patchcords & preterminated links Accurate solutions for tailored cabling MMC, INNOVATION background for many years Since 1993, Multimedia Connect has been a structured
More informationSPECIFICATION SINGLEMODE MULTIMODE. Premium Connector 0.08dB Typical 0.15dB Typical Standard Connector 0.12db Typical 0.20db Typical Return Loss
12 FC Connector Best used in single mode applications and known for exceptionally accurate positioning, the FC or Fixed Connection Connector is designed for use in unstable environments because of their
More informationCable Entry Easy and secure duct of loose tube or breakout cables at the rear. Marking Numbered ports guarantee clearly arranged patchpanel marking.
iber Optic Assembly Individual sales orders are made ready to splice Just-in-Time in our captive production at shortest time and with delivery on time. We store a wide product bandwidth to shorten delivery
More informationPREMIUM GRADE PATCHCORD / PIGTAIL
01 Go4Fiber provides the broadest choice of patchcords and pigtails to the industry including LC, SC, FC, ST, E2000 with Ultra-polished (UPC), Angle-Polished (APC) or other polish requirement. With our
More informationUniCam High-Performance Connectors, Multimode and Single-Mode
Features and Benefits Broad operating temperature (-40 to +75 C) Utility and flexibility Factory-polished end face Consistent optical performance Fast termination and no consumables Low installation cost
More informationInternal tray pulls out towards the user, providing room to manage the fiber cable behind the fiber adapter panels or cassettes.
JPM427A-R2 1U Pull-Out Fiber Splice Tray Enclosure Internal tray pulls out towards the user, providing room to manage the fiber cable behind the fiber adapter panels or cassettes. Supports up to three
More informationPREMIUM GRADE PATCHCORD / PIGTAIL
01 Go4Fiber provides the broadest choice of patchcords and pigtails to the industry including LC, SC, FC, ST, E2000 with Ultra-polished (UPC), Angle-Polished (APC) or other polish requirement. With our
More informationHeat-Cure Single-Fiber Connectors A LANscape Solutions Product
Applications Field or factory installations requiring high optical performance Cable Assembly House, OEM and Manufacturing Environments Multiple terminations where material cost is the main consideration
More informationRCC45 ➁ Overview / /
RCC45 ➁ Overview 010.2936 More future and modularity Integration of POF and power Guaranteed modularity Long-term investment protection Flexible cabling solution Fast and convenient installation 1 010.2721
More informationExpanded SECURE Connector Product Line Includes MPO and LC Interfaces
Expanded SECURE Connector Product Line Includes MPO and LC Interfaces Ten variants in ten colors offered in two new interfaces Tyco Electronics has expanded its SECURE connector product offering to include
More informationMulti-Fibre Loose Tube Cable Assemblies
Multi-Fibre Cable Assemblies Loose tube multi-fibre pre-terminated assemblies designed and manufactured with a variety of standard optical and connectors. With a core count up to 144 fibres using 900um
More informationOR GN BR SL WT RD BK YW VT RO AQ
New Products 2016 See inside for lots of new products from Excel and contact your local sales representative for price and availability details, or visit our brand new website www.excel-networking.com
More informationPretium EDGE FX Solutions
Pretium EDGE FX Solutions for Enterprise Data Centers and Storage Area Networks Corning Cable Systems Pretium EDGE FX Solutions create a fixed-tray fiber optic tip-to-tip solution for Data Centers and
More informationSC/APC Connector. CATV Active device Telecommunication. Metro Local Area Data processing
Introduction As the industry s leading supplier of single-mode cable assemblies, Optical Fiber offers the most complete line of connectors and factory-terminated cables. From single-fiber jumpers to high
More informationFIBRE OPTIC ENCLOSURES SYDNEY MELBOURNE BRISBANE PERTH JCSTECH.COM.AU
FIBRE OPTIC ENCLOSURES SYDNEY MELBOURNE BRISBANE PERTH JCSTECH.COM.AU FIBREOPTIC RACK MOUNT ENCLOSURE: FIXED The JCS Technologies fixed rack mountable fibreoptic break out enclosure is suitable for patching
More informationFibre optical adapters
Fibre optical adapters DATA SHEET DB4120-E Issue P Page 1 of 8 For connection of fibre optical connectors. Single or multi mode. Adapters for most connector types. SC adapters 23200316 Adapter, SC SPX,
More informationEDGE Solutions Hybrid Trunk, OM4, Low- Loss, MTP to LC Duplex Uniboot, 24 fibres
EDGE MTP trunks are preterminated cables with 12 -fibre MTP connectors or LC duplex connectors on either side. The trunks build up the major skeleton of the passive network infrastructure, and thanks to
More informationHI-DEX is an ultra high-performance, pre-terminated and modular optical fibre cabling system based on MT ferrule connector technology.
APPLICATION HI-DEX is an ultra high-performance, pre-terminated and modular optical fibre cabling system based on MT ferrule connector technology. This product set is designed for installation in the data
More informationSensus High-Density Panels for Aggregation and Breakout
Specifications Chassis Specifications Weight Rack Mounting Slots Dimensions (H/W/D) 4.15 lbs Fits 19, 21 and 23 racks 3 (2 patching modules, 1 management module) 3.45 x 17.44 x 8.67 (8.67 cm x 44.30 cm
More informationWhite Paper. FASTConnect or FUSEConnect Which Should You Choose? ABSTRACT INTRODUCTION. Tom Jeffers, Associate Product Manager, AFL
FASTConnect or FUSEConnect Which Should You Choose? Tom Jeffers, Associate Product Manager, AFL ABSTRACT Field-installable connectors provide a convenient method for terminating fiber optic cable at remote
More informationMTP/MPO Cable Assemblies
MTP/MPO Cable Assemblies MTP cable assemblies are multi-fiber patch cords suitable for high-density back plane and PCB solutions. MTP brand Fan-Out, Interconnect and Trunk cable offer up to 36 times the
More informationSinglemode SC Connector Kits Polymer Crimp Body. Housing Boot. 3.0 mm Jacketed. Simplex Blue Blue. Duplex Blue Blue
One-piece connector body: Fastest assembly Field installable Anaerobic adhesive compatible Compliant with JIS C-5973 Fibre Channel TIA FOCIS-3 Pre-radiused ceramic ferrules For 125 µm cladding diameter
More informationProduct Catalogue. MPO / MTP Solutions
Product Catalogue MPO / Solutions version 2017 Empowering businesses through innovative network solutions. We have been pushing boundaries and providing innovative products and solutions to clients around
More informationDIAMOND Fiber Optic Components
DIAMOND Fiber Optic Components CABLE ASSEMBLIES AND ADAPTERS E-2 Backplane PC/APC MULTIMODE PC Enthusiastic customers using the E-2 TM connector system on their equipment encouraged the development of
More informationLC-QuickRelease Faster, lighter, more compact
LC-QuickRelease Faster, lighter, more compact Get more Efficiency More packing density in the rack Convenience Handling without tools Flexibility Freely selectable configuration Efficiency. More packing
More informationCONNECTOR SOLUTIONS. FASTConnect FUSEConnect Field Master
CONNECTOR SOLUTIONS FASTConnect Provide some of the fastest terminations in the industry Does not require a crimp or special assembly tools Mechanical, true no epoxy/no polish (NENP) connectors FUSEConnect
More informationLightStack. Ultra High Density Plug & Play System PATENT PENDING
LightStack PATENT PENDING Ultra High Density Plug & Play System WWW.SIEMON.COM 8 About LightStack As today s high-density data centers migrate from 10 to 40 and 100 gigabit speeds, they require low-loss
More informationPre-terminated Multi Fibre Cable Assemblies
AFL manufactures a broad range of factory terminated and tested multi-fibre cable assemblies. These assemblies are available in various fibre types and counts, cable constructions and connector options.
More information