2013 North America Training Courses Gas Chromatographs Process Gas Analysis Liquid Instruments. Rosemount Analytical Educational Services

Transcription

1 2013 North America Training Courses Liquid Instruments Rosemount Analytical Educational Services

2 ROSEMOUNT ANALYTICAL Emerson Process Management is committed to providing our customers an exceptional level of education that spans every aspect of our Rosemount Analytical product portfolio. We work hard to ensure that our academic deliverables are as applicable to your everyday job functions and responsibilities as possible. With a wide selection of sensors, analyzers, gas chromatographs, and other measurement and analysis technologies, Rosemount Analytical helps customers streamline process performance with innovative improvements that increase throughput, minimize energy usage, maximize asset life, and take advantage of continuous online diagnostics for amazing results. Visualize analytical training that reduces your work load by providing a complete understanding of installation, configuration, calibration, maintenance, and troubleshooting techniques. Analyze your process streams faster and more accurately than you ever thought possible because your team is highly knowledgeable and well prepared to run your analytical equipment. Optimize your analytical installations for increased accuracy and throughput, precise measurement, reduced costs, and predictive maintenance through the development of your own team of in-house experts. Your toughest analytical challenges need a Rosemount Analytical solution. Whether your goal is to reduce maintenance costs, maximize up-time, or improve process quality, Rosemount Analytical offers training on our full range of products, including: 1500XA, 700XA, Model 500, and Model 700 X-STREAM, X-STREAM Enhanced, MLT, NGA, BINOS, & HYDROS process gas analyzers Oxymitter, CCO 5500, OPM 3000/4000, and World Class 3000 combustion analyzers Model 6081P and 6081C wireless ph/orp and Conductivity analyzers Model 56, 1056, and 1057 four-wire instruments Model 1066 and 5081 transmitters 2

3 SureService Customized Training Programs Maximize your investment in training through a customized SureService training package. Our training experts will work with you to identify a comprehensive training program that uses a combination of classroom training and on-site demonstration that covers your entire scope of Rosemount Analytical products. With SureService, you can customize a training program that best prepares your team of engineers, operators, and technicians to service and maintain your Rosemount Analytical equipment. Standard Training Modules Rosemount Analytical offers 25 training classes to ensure you get the most out of your new analytical equipment. Courses consist of hands-on sessions and one-on-one time with instructors. These workshops are the quickest and most economical way to learn critical skills to help you operate your Rosemount Analytical equipment. Customized Training Modules We also offer customized courses at your site or at either of our three training facilities in the United States (Houston, Texas, Irvine, California, or Solon, Ohio). Customized courses will be limited to your personnel, and will be taught by a factory-trained and certified Emerson Field Service Engineer with years of experience working on analytical equipment. Each customized course will be tailored in terms of content, application focus, and duration to best fit your specific needs. Maximize Cost Savings Through our Platinum, Gold, or Silver SureService Training Programs Rosemount Analytical offers Platinum, Gold, and Silver SureService training contracts that enable our customers to enjoy significant cost savings over list prices. Platinum SureService Training Package For maximum cost savings, select our Platinum SureService training package, which enables you to select seven courses for up to 10 students per course for a single, fixed contract fee. The Platinum SureService training package is ideal for customers with a broad scope of Rosemount Analytical products in their plants. Gold SureService Training Package Our Gold SureService training package is ideal for customers with a moderate scope of Rosemount Analytical products in their plants. With the Gold SureService training package, you can select up to five courses for up to 10 students per course for a single, fixed contract fee. Silver SureService Training Package For customers requiring training on a single Rosemount Analytical product, the Silver SureService training package may be a good option. The Silver SureService training package enables you to select three courses for up to 10 students per course for a single, fixed contract fee. 3

4 Course Description & Registration Information Course Description Contact Information & Registration Training Courses are offered in a classroom setting at each of our three Analytical Training Centers in the United States. Customized courses can be arranged off-site in the field or at client s office locations. Our certified instructors will work with you to determine your unique learning objectives and develop a training program tailored to the specific needs of your engineers, technicians, and operting staff. To request a training quote, contact your local Account Manager or speak directly to: Our instructors can use your equipment or have our demo equipment shiped to your site to conduct the class. All classroom materials and manuals are provided by the instructor. Classes are performed on site by a highly qualified field service engineer using your equipment. Our field service engineers will walk your team through installation, startup, and maintenance procedures. This is a great way for plant personnel to learn through experience to configure, commission, and perform calibrations on their online instrumentation under the guidance of a certified field service expert. Class duration is dependent on the analyzer and measurements being covered. B.J. Freeman Bj.Freeman@Emerson.com T To register for a training course, contact: Ana Morgan Ana.Morgan@Emerson.com T For custom course information, contact: Michael Saiphoo Michael.Saiphoo@Emerson.com T Analytical Course Schedule February Product Course # - Description R Operation and Maintenance of 700XA Service Rates Dates $ 2,600 Feb. 4 to 8 Feb. 4 to 8 R Operation and Maintenance of 1500XA $ 2,600 R Advanced 700XA $ 2,900 Feb. 11 to 15 Feb. 11 to 15 R Advanced 1500XA $ 2,900 April / May Product Course # - Description R Operation and Maintenance of 700XA Service Rates Dates $ 2,600 Apr. 1 to 5 Apr. 1 to 5 R Operation and Maintenance of 1500XA $ 2,600 R Advanced 700XA $ 2,900 Apr. 8 to 12 Apr. 8 to 12 R Advanced 1500XA $ 2,900 R Operation and Maintenance of Model 500 $ 2,600 R Advanced Process Model 500 and Model 700 is per student with a maximum of 10 students per class (**) is per day, with up to 7 students per class 4 $ 2,900 Apr. 29 to May 2 May 6 to 10

5 2013 Analytical Course Schedule July / August Product Course # - Description Service Rates Dates Jul. 29 to Aug. 2 Jul. 29 to Aug. 2 R Operations and Maintenance of 700XA $ 2,600 R Operations and Maintenance of 1500XA $ 2,600 Aug. 5 to 9 Aug. 5 to 9 R Advanced 700XA $ 2,900 R Advanced 1500XA $ 2,900 October / November Product Course # - Description Service Rates R Operations and Maintenance of Model 500 $ 1,950 R Advanced Process Model 500 and Model 700 $ 2,900 Dates Oct. 7 to 11 Oct. 14 to 18 Oct. 28 to Nov.1 Oct. 28 to Nov. 1 R Operations and Maintenance of 700XA $ 2,600 R Operations and Maintenance of 1500XA $ 2,600 Nov. 4 to 8 Nov. 4 to 8 R Advanced 700XA $ 2,900 R Advanced 1500XA $ 2,900 Upon Request Product Course # - Description Service Rates Dates R Introduction to Model 500 and Model 500 Gas Chromatoraphs $ 1,950 R Introduction to 700XA and 1500XA $ 1,950 R Operation and Maintenance of Model 700 $ 2,600 R Advanced Model 700 $ 2, C Chemiluminiscence Analyzers $ 2,850 (**) $ 2,850 (**) (**) Hydrocarbon Analyzers NGA 2000 Process Gas Analyzers $ 2, MLT Process Gas Analyzers $ 2,850 (**) (**) BINOS/OXYNOS/HYDROS Analyzers $ 2, Oxygen Flue Gas Analyzer Maintenance, Including Oxymitter and World Class 3000 $ 2,850 (**) Continuous Emissions Monitoring Systems (CEMS) $ 2,850 (**) CCO 5500 CO Analyzer Maintenance $ 2,850 (**) (**) OPM 3000/ Opacity Monitor Maintenance $ 2, Online Safety Training for Process Gas Analyzers $ 2,850 (**) Liquid Instruments 2200 CEUs:. 7 - General ph, Conductivity, and ORP Theory $ 700 Liquid Instruments 2201 CEUs:. 7 - Amperometric Measurement Theory: Chlorine, Dissolved Oxygen, and Ozone $ 700 Liquid Instruments 2202/2202V CEUs:. 2 - Two-Wire Instrumentation Models 1066 and Model 5081 Transmitters $ 2,100 Liquid Instruments 2203/2203V CEUs:. 2 - Wireless Instrumentation Models 6081P and 6081C $ 2,100 Liquid Instruments 2204/2204V CEUs:. 2 - Four-Wire Instrumentation Models 56, 1056, or 1057 $ 2,100 Liquid Instruments 2205/2205V CEUs:. 7 - Customer-specific Measurement Theory $ 2,100 is per student with a maximum of 10 students per class (**) is per day, with up to 7 students per class 5

6 GAS CHROMATOGRAPHS COURSE DESCRIPTIONS Rosemount Analytical SureService training programs offer standard and customized courses to ensure you get the most out of your gas chromatographs. Courses consist of small classes with hands-on sessions and one-on-one time with instructors. These workshops are the quickest, most economical way to learn critical skills to help you operate your Rosemount Analytical products. 6 Course R4100 Introduction to Model 500 and Model 700 Course R4105 Introduction to 700XA and 1500XA This three-day course gives students a basic understanding of how a gas chromatograph works, emphasizing chromatograph fundamentals and basic theory. All necessary equipment and handouts will be provided. Basic computer skills required. This three-day course gives students a basic understanding of how the 700XA and 1500XA gas chromatographs work in Process Applications. This course emphasizes chromatograph fundamentals and basic theory. All necessary equipment and handouts will be provided. Review basic chromatography principles and their application to gas measurement Understanding basic chemistry Flow configuration, carrier, and calibration Gas systems Understanding basic sample systems Working with basic chromatography hardware Setting Timed Events, Retention Times, and Response Factors Understaning data calculations and control parameters Identifying problems using chromatographs Identifying gas components Reviewing chromatography principles Understanding chemistry, flow configuration, carrier, and gas systems Working with basic analyzer hardware Setting Timed Events, Retention Times, and Response Factors Understanding data calculations and control parameters Reading chromatograms Identifying gas components Calibrating gas chromatographs Reviewing basic software operation $ 1,950/class/student $ 1,950/class/student Upon request at our Houston, TX office. Call or visit our website for additional information. Upon request at our Houston, TX office. Call or visit our website for additional information. Classes typically start at 1 pm on Monday and end at 12 pm on Wednesday to accommodate travel. Classes typically start at 1 pm on Monday and end at 12 pm on Wednesday to accommodate travel.

7 Course R4210 Operation & Maintenance of Model 500 Course R4212 Operation & Maintenance of Model 700 This course is appropriate for those interested in learning how to operate and repair a Model 500 GC. Participants must have worked with a chromatograph for at least six months or completed the Introduction to Model 500 and Model 700 course. (Course R4100) This course is appropriate for those interested in learning how to operate and repair a Model 700 GC. Participants must have worked with a chromatograph for at least six months or completed the Introduction to Model 500 and Model 700 course. (Course R4100) Prerequisites Introduction to Model 500 and Model Course R4100 or equivalent knowledge Prerequisites Introduction to Model 500 and Model Course R4100 or equivalent knowledge Understanding gas chromatography Using the basic chromatography system in Understanding carrier and calibration gas systems Installing and operating MON2000 software Applying Chromatograph Integration techniques and Post-Analysis Calculations Using the chromatograph to identify problems Setting Timed Events, Retention Times, and Checking Response Factors Starting up a gas chromatograph Troubleshooting the 2350A Controller User Directory Outputs Conducting preventative maintenance Communicating with other devices Reviewing spare parts recommendations Understanding gas chromatography Using the basic chromatography system in Understanding carrier and calibration gas systems Installing and operating MON2000 software Applying Chromatograph Integration techniques and Post-Analysis Calculations Using the chromatograph to identify problems Setting Timed Events, Retention Times, and Checking Response Factors Starting up a gas chromatograph Conducting preventative maintenance Communicating with other devices Reviewing spare parts recommendations $ 2,600/class/student 4/29, 10/7 Also available upon request at our Houston, TX office. Call or visit our website for more information. Course typically lasts five days. Classes start at 1 pm on Monday and end at 12 pm on Friday to accommodate travel. $ 2,600/class/student Upon request at our Houston, TX office. Call or visit our website for additional information. Course typically lasts five days. Classes start at 1 pm on Monday and end at 12 pm on Friday to accommodate travel. To Register for a Rosemount Analytical Training Course, please contact: Ana Morgan Ana.Morgan@Emerson.com T Space is limited and reserved on a first-come first-serve basis. Please register as early as possible 7

8 GAS CHROMATOGRAPHS COURSE DESCRIPTIONS 8 Course R4213 Operation & Maintenance of 700XA Course R4214 Operation & Maintenance of 1500XA This course is appropriate for those interested in learning how to operate and repair a 700XA GC. Participants must have worked with a chromatograph for at least six months or completed the Introduction to 700XA and 1500XA course. (Course R4105) This course is appropriate for those interested in learning how to operate and repair a 1500XA GC. Participants must have worked with a chromatograph for at least six months or completed the Introduction to 700XA and 1500XA course. (Course R4105) Prerequisites Introduction to - Course R4105 or equivalent knowledge Prerequisites Introduction to - Course R4105 or equivalent knowledge Understanding gas chromatography Using the basic chromatography system in Process Gas Analysis Understanding carrier and calibration gas systems Installing and operating MON2020 software Applying Chromatograph Integration techniques and Post-Analysis Calculations Using the chromatograph to identify problems Setting Timed Events, Retention Times, and Checking Response Factors Starting up a gas chromatograph Conducting preventative maintenance Communicating with other devices Reviewing spare parts recommendations Understanding gas chromatography Using the basic chromatography system in Process Gas Analysis Understanding Carrier and Calibration gas systems Installing and operating MON2020 software Applying Chromatograph Integration techniques and Post-Analysis Calculations Using the chromatograph to identify problems Setting Timed Events, Retention Times, and Checking Response Factors Starting up a gas chromatograph Conducting preventative maintenance Communicating with other devices Reviewing spare parts recommendations $ 2,600/class/student $ 2,600/class/student 2/4, 4/1, 7/29, 10/28 Also available upon request at our Houston, TX office. 2/4, 4/1, 7/29, 10/28 Also available upon request at our Houston, TX office. Classes typically start at 1 pm on Monday and end at 12 pm on Friday to accommodate travel. Classes typically start at 1 pm on Monday and end at 12 pm on Friday to accommodate travel.

9 Course R4311 Advanced Process Model 500 and Model 700 Course R4315 Advanced 700XA This course is most valuable to those with three years of chromatography experience. Participants should develop an advanced understanding of gas chromatograph operation, troubleshooting, and maintenance. Training will be customized based on the specific application information that the students provide. The experience instructor will look closely at the student-provided data and offer further insight to participants. This course equips students with a full understanding of many advanced techniques used in process gas chromatography. An experienced instructor and focused material enable students to troubleshoot a variety of field issues. Prerequisites Introduction to Model 500 and Model Course R4100 or equivalent knowledge. Setting Valve Timing Troubleshooting Hardware Understanding mixture adjustments for FID/FPD Setting timed events Reviewing liquid sample injection Reviewing sample system techniques Performing calibration and accuracy checks Start-up and overhauling the GC Understanding chromatograph flow configurations Overhauling valves Reviewing thermal conductivity, Flame Ionization and Flame Photometric Detectors Understanding Sample, Carrier, Calibration gas systems Installing and Using MON2000 software for integration and calibration Setting Timed Events, Retention Times, and Checking Response Factors Understanding Start-Up procedures Setting Valve-Timing and Flows with different flow configurations Check for proper separation and analyzis Troubleshooting the GC Configuring reporting details and control outputs Conducting preventative maintenance Communicating to other devices Reviewing spare parts recommendations Prerequisites Operation & Maintenance of 700XA - Course R4213 $ 2,900/class/student 2/11, 4/8, 8/5, 11/4 Also available upon request at our Houston, TX office. Classes typically start at 1 pm on Monday and end at 12 pm on Friday to accommodate travel. $ 2,900/class/student 5/6, 10/14 Also available upon request at our Houston, TX office. Call or visit our website. Product Family To Register for a Rosemount Analytical Training Course, please contact: Ana Morgan Ana.Morgan@Emerson.com T Space is limited and reserved on a first-come first-serve basis. Please register as early as possible 9

10 GAS CHROMATOGRAPHS COURSE DESCRIPTIONS Course R4316 Advanced 1500XA Gas Chromatograph Course R4330 Advanced Model 700 Gas Chromatograph This course equips students with a full understanding of many advanced techniques used in process gas chromatography. An experienced instructor and focused material enable students to troubleshoot a variety of field issues. This course equips students with a full understanding of advanced techniques used in process gas chromatography. An experienced instructor and focused material enable students to troubleshoot a variety of field issues. Prerequisites Operation & Maintenance of 700XA - Course R4213 Prerequisites Operation & Maintenance of 700XA - Course R4213 Setting valve timing Troubleshooting hardware Understanding mixture adjustments fod FID/FPD Setting times events Reviewing liquid sample injection Reviewing sample system techniques Performing Calibration and Accuracy Checks Recovering GC after analysis interruption Start-up and overhauling the GC Setting valve timing Troubleshooting hardware Understanding mixture adjustments for FID/FPD Setting timed events Reviewing liquid sample injection Reviewing sample system techniques Performing Calibration and Accuracy Checks Recovering GC after analysis interruption Start-up and overhauling the GC $ 2,900/class/student $ 2,900/class/student 2/11, 4/8, 8/5, 11/4 Also available upon request at our Houston, TX office. Upon request at our Houston, TX office. Call or visit our website for additional information. Classes typically start at 1 pm on Monday and end at 12 pm on Friday to accommodate travel. 10 Classes typically start at 1 pm on Monday and end at 12 pm on Wednesday to accommodate travel.

11 PROCESS GAS ANALYSIS COURSE DESCRIPTIONS With a wide selection of sensors, analyzers, gas chromatographs, and other measurement and analysis technologies, Rosemount Analytical helps customers streamline process performance with innovative improvements that increase throughput, minimize energy usage, maximize asset life and take advantage of continuous online diagnostics for amazing results. Course C Chemiluminescence Analyzer This one-day course uses lectures and hands-on service training to instruct how to install and maintain the Rosemount Analytical Model 951C chemiluminescence analyzer. Students will: Identify subassemblies and explain their functionality Explain the principles of operation Perform calibration and testing Properly install and troubleshoot the analyzer 951C and Principles of Operation Test equipment selection Bench Testing the 951C Calibrating the 951C Chemiluminescence Analyzer Installation and Start-up Troubleshooting and Maintenance $ 2,850 per day (up to 7 students per class) Upon request at our Solon, OH office. Course A Hydrocarbon Analyzer This one-day course uses lectures and hands-on service training to instruct how to install and maintain the Rosemount Analytical Model 400A hydrocarbon analyzer. Students will: Identify subassemblies and explain their functionality Explain the principles of operation Perform calibration and testing Properly install and troubleshoot the analyzer 400A and Principles of Operation Test equipment selection Bench Testing the 400A Calibrating the 400A Hydrocarbon Analyzer Installation and Start-up Troubleshooting and Maintenance $ 2,850 per day (up to 7 students per class) Upon request at our Solon, OH office. To Register for a Rosemount Analytical Training Course, please contact: Ana Morgan Ana.Morgan@Emerson.com T Space is limited and reserved on a first-come first-serve basis. Please register as early as possible 11

12 PROCESS GAS ANALYSIS COURSE DESCRIPTIONS Course 2107 NGA 2000 Process Gas Analyzers Course 2110 MLT Process Gas Analyzers This course consists of a one-day class per selected analyzer: NGA Platform NGA CLD NGA WCLD NGA FID NGA HFID This three-day course uses lectures and hands-on service training to provide instruction on MLT analyzers, platforms, and other menu structures. This course will teach the student how to install, maintain, and troubleshoot the MLT series of analyzers. Application and selection will be briefly covered, including the hazardous area requirements. Lectures and hands-on service training are provided on how to install, maintain, and troubleshoot the NGA series of analyzers. Students will: Identify modules and their functionality Understand the basic theory of operation Set up software variables for proper calibration and operation Use the software diagnostics to troubleshoot problems Students who complete this course will: Identify individual modules and their functionality Understand the basic theory of operation of each module Set up the software variables for proper calibration and operation Understand and properly use software diagnostics NGA NGA as a System NGA Testing NGA Startup and Installation $ 2,850 per day (up to 7 students per class) of MLT Theory of Operation Installation Configuration and Calibration Maintenance and Troubleshooting $ 2,850 per day (up to 7 students per class) Upon request at our Solon, OH office. Upon request at our Solon, OH office. MLT Process Gas Analyzers 12

13 Course 2113 BINOS/OXYNOS/HYDROS Analyzers This three-day course familiarizes the student with the non-dispersive infrared, electrochemical oxygen, paramagnetic oxygen, and thermal conductivity measurement techniques used in the BINOS, OXYNOS, and HYDROS gas analyzers. Maintenance and troubleshooting are covered in detail. Typical applications and startup procedures are also discussed. Objectives Theory & Installation Troubleshooting Maintenance $ 2,850 per day (up to 7 students per class) Upon request at our Solon, OH office. Course 2153 Oxygen Flue Gas Analyzer Maintenance, Including Oxymitter and World Class 3000 This one-day course covers the service requirements for oxygen analyzers in general and the installation, operation, calibration, and maintenance of the World Class 3000 and Oxymitter. Combustion Requirements Methods of Oxygen Analysis Typical Uses of Oxygen Analysis Combustion Efficiency Zirconia (ZrO2) Oxygen Analysis Theory of Operation Oxygen Analyzer - Installation - Hardware - Maintenance - Troubleshooting - HART Communications $ 2,850 per day (up to 7 students per class) Upon request at our Solon, OH office. Oxymitter To Register for a Rosemount Analytical Training Course, please contact: Ana Morgan Ana.Morgan@Emerson.com T Space is limited and reserved on a first-come first-serve basis. Please register as early as possible 13

14 PROCESS GAS ANALYSIS COURSE DESCRIPTIONS Course 2157 Continuous Emissions Monitoring Systems (CEMS) Course 2168 CCO 5500 CO Analyzer Maintenance This course is for instrument technicians responsible for the maintenance of continuous emissions monitoring systems. It covers the basic fundamentals and theory of operation, installation, calibration, and maintenance of continuous emissions monitoring system. This one-day course covers the theory, application, and operation of the CCO Infrared absorption spectroscopy is defined and explained as a measurement technique. Focusing on applications, the instrument is reviewed and the students are taught to install and maintain the analyzer. Environmental Requirement Process Applications Theory of Operation Sample System Instrument - Installation and Troubleshooting - Hardware and Maintenance $ 2,850 per day (up to 7 students per class) On site only. Offered upon request at our Solon, OH office. Students will: Understand the basic theory of operation Learn to install and start up the analyzer, including calibration Use the software diagnostics to troubleshoot problems of the CCO 5500 Carbon Monoxide Analyzer Theory of Operation and Appropriate Applications Installation, Configuration, and Calibration Troubleshooting and Maintenance $ 2,850 per day (up to 7 students per class) Offered upon request at our Solon, OH office. 14

15 Course 2171 Course 2169 OPM 3000/ Opacity Monitor Online Safety Training for Process Gas Analyzers Maintenance This one-day course is a combination of laboratory instruction, lecture, and hands-on service training, combined with the objective of teaching the theory and operation of the opacity monitor. Product application will be reviewed. Correct selection of equipment, installation, and startup are critical and will be covered in detail. Operational diagnostics and maintenance are explored with the goal of allowing the student to recognize and correct any issues promptly. EPA certification and quarterly audits will be discussed, but planning will be site-specific. This fully customized course provides students with a strong understanding of gas analyzer best practices as they relate to the safe operation and maintenance of the specific model(s) of Rosemount Analytical gas analyzers found in their plants, including the NGA2000, MLT, Binos, CLD, X-STREAM, and X-STREAM Enhanced. The instructor focuses on the specific analyzers that are applicable to the students specific needs. This course emphasizes safe handling of Rosemount Analytical analyzers. All necessary equipment and handouts will be provided. of the Opacity Monitor Theory of Operation Installation and Startup Troubleshooting and Maintenance Audit and Reporting Requirements Analyzer overview, including hardware and construction Software functionality Physical Ppincipals of IR and UV Photometric Measurements and Oxygen Paramagnetic Measurements of the electronics Replacement of Physical Components Testing and Troubleshooting Spare Parts Mechanical Assembly/Disassembly Sample Handling System Method, Theory, and Troubleshooting Site-specific Applications $ 2,850 per day (up to 7 students per class) Offered upon request at our Solon, OH office. $ 2,850 per day (up to 7 students) Location & Start Dates: On site only. Offered upon request at our Solon, OH office. To Register for a Rosemount Analytical Training Course, please contact: Ana Morgan Ana.Morgan@Emerson.com T Space is limited and reserved on a first-come first-serve basis. Please register as early as possible 15

16 LIQUID INSTRUMENTS COURSE DESCRIPTIONS Rosemount Analytical offers the most complete range of analyzers, transmitters, and sensors for continuous online measurement of ph, ORP, conductivity, dissolved oxygen, ozone, chlorine, and turbidity. These products are used extensively in the chemical, food and beverage, power, mineral, petroleum, pharmaceutical, water treatment, and wastewater treatment industries. Course CEUs:.7 General ph, Conductivity, and ORP Theory This one-day course provides a solid theoretical background in ph, conductivity, and ORP measurements. Students will: Understand how each measurement is made Recognize installation/application problems Learn configuration and calibration procedures Implement a maintenance program Troubleshoot problems using diagnostics What is ph/conductivity/orp and How Measurements are Made Physical Process Properties and How They Affect Online Measurements Proper Calibration Techniques Cleaning and Maintenance of a Sensor Choosing Correct Sensor for any Process How to Decipher Diagnostic Readouts ph/conductivity Sensor ph/conductivity/orp Analyzer Formal Classroom Factory Training- $ 700/class/student Upon request at our Irvine, CA office. Also available: On-Site Standard Hands-on Training (8 hrs/day) $ 1,400/day + travel and living expenses On-site Formal Classroom Factory Training (8 hrs/day) - $ 2,100/day + travel and living expenses 16 Course CEUs:.7 Amperometric Measurement Theory: Chlorine, Dissolved Oxygen, and Ozone This one-day course provides insight into the complicated amperometric measurements of chlorine, dissolved oxygen, and ozone. Students will learn the concepts of how amperometric sensors work and how to calibrate each type of measurement. Students will: Differentiate the various species of chlorine Implement a proper maintenance program Use diagnostics to troubleshoot problems Amperometric Measurement Theory Chlorine/Dissolved Oxygen/Ozone Calibration Procedures for Each Measurement Maintenance and Troubleshooting Tips Formal Classroom Factory Training- $ 700/class/student Upon request at our Irvine, CA office. Also available: On-Site Standard Hands-on Training (8 hrs/day) $ 1,400/day + travel and living expenses On-site Formal Classroom Factory Training (8 hrs/day) - $ 2,100/day + travel and living expenses

17 Course 2202/2202V - CEU:.2 Two-Wire Instrumentation Models 1066 and 5081 Transmitters This two-hour class covers the features, benefits, and operation of any Rosemount Analytical Model 5081 or Model 1066 two-wire transmitter. Each transmitter family can measure ph, ORP, contacting conductivity, toroidal conductivity, chlorine, dissolved oxygen, and ozone. Both transmitters have advanced diagnostic capabilities and can communicate via HART or FOUNDATION fieldbus communication protocols. Installation and Application Problems Configuration of Outputs (HART only) Use of Diagnostic Features (if applicable) Sensor Calibration Troubleshooting $ 2,100/day + travel and living expenses Offered upon request at our Irvine, CA office. Also available: Formal Classroom Factory Training (8 hrs/day) - $ 700/class/student On-Site Standard Hands-on Training (8 hrs/day) $ 1,400/day + travel and living expenses Course 2203/2203V - CEUs:.2 Wireless Instrumentation Models 6081P and 6081C This two-hour class covers the features, benefits, and operation of the Rosemount Analytical Model 6081 wireless device. The Model 6081P measures ph and ORP, and is SMART sensor-enabled. The Model 6081C measures contacting conductivity with sensors that have either two-wire or four-wire inputs. Each device communicates back to a 1420 Gateway via Wireless HART communication Connecting the Model 6081 to a Wireless Mesh Network Configuring Update Rates Mesh Network Theory Sensor Calibration Troubleshooting $ 2,100/day + travel and living expenses Offered upon request at our Irvine, CA office. Also available: Formal Classroom Factory Training (8 hrs/day) - $ 700/class/student On-Site Standard Hands-on Training (8 hrs/day) $ 1,400/day + travel and living expenses Model 6081P and 6081C To Register for a Rosemount Analytical Training Course, please contact: Ana Morgan Ana.Morgan@Emerson.com T Space is limited and reserved on a first-come first-serve basis. Please register as early as possible 17

18 LIQUID INSTRUMENTS COURSE DESCRIPTIONS Course 2204/2204V - CEUs:.2 Four-Wire Instrumentation Models 56, 1056, or 1057 Course 2205/2205V - CEUs:.7 Customer-Specific Measurement Theory This two-hour class covers the features, benefits, and operation of the Rosemount Analytical Model 56, 1056, and The Model 56 and 1056 can measure ph/ ORP/ISE, contacting conductivity, toroidal conductivity, chlorine dissolved oxygen, and ozone, and can alsoc measure turbidity in drinking water and flow from a pulse sensor, and can display any 4 20 ma signal input. The Model 1057 can measure ph/orp/ise, or contacting conductivity only. Each instrument has its own available features and menu tree, which will be covered in great detail. This seven-hour class is fully customized to cover the specific measurements that the customer requests. A certified instructor will cover up to four subjects in one day. The four subjects may be measurement or product related. The list of measurements that can be bundled into a tailored training course are ph, ORP, contacting conductivity, toroidal conductivity, turbidity, chlorine, dissolved oxygen, and ozone. Each measurement theory has its own duration, which can be modified to fit your time-frame needs. Select an analyzer class (Course 2204) or transmitter class (Course 2202) to accompany the measurement theories for a wellrounded class. Installation and Application Problems Configuration of Outputs/Alarms Programming of Automated Cleaning Systems (DO/pH) Using diagnostic features (if applicable) Sensor Calibration Troubleshooting $ 2,100/day + travel and living expenses Offered upon request at our Irvine, CA office. Also available: Formal Classroom Factory Training (8 hrs/day) - $ 700/class/student On-Site Standard Hands-on Training (8 hrs/day) $ 1,400/day + travel and living expenses Installation and Application Problems Configuration of Outputs/Alarms Using Diagnostic Features Sensor Calibration and Maintenance Troubleshooting $ 2,100/day + travel and living expenses Offered upon request at our Irvine, CA office. Also available: Formal Classroom Factory Training (8 hrs/day) - $ 700/class/student On-Site Standard Hands-on Training (8 hrs/day) $ 1,400/day + travel and living expenses

19 Types of Training Contact Information & Registration Formal classroom training is performed at the customer s site or at our one of our training facilities in Irvine, California, Houston, Texas, or Solon, Ohio. It typically lasts four to eight hours a day, depending on the measurements covered and instruments selected. Formal classes are designed to expand a student s knowledge, explain how to properly configure the analyzer to meet the plant s monitoring and control needs, how to properly calibrate and care for the sensor, and how to use diagnostic variables to troubleshoot problems and schedule routine maintenance or sensor replacement. To request a training quote, contact your local Account Manager or speak directly to: Remote training is performed at an off-site facility and is offered to our customers as demand dictates. Structured as a formal class, remote training offers both lecture and handson instruction at a location that more effectively meets our customers requirements. B.J. Freeman Bj.Freeman@Emerson.com T To register for a training course, contact: Ana Morgan Ana.Morgan@Emerson.com T For custom course information, contact: Michael Saiphoo Michael.Saiphoo@Emerson.com T

20 2013 North America Training Courses Liquid Instruments Rosemount Analytical Services GAS CHROMATOGRAPH TRAINING CENTER Emerson Process Management Rosemount Analytical West Little York, Suite 200 Houston, TX USA Toll Free T F gc.csc@emerson.com PROCESS & COMBUSTION TRAINING CENTER Emerson Process Management Rosemount Analytical 6565P Davis Industrial Parkway Solon, OH USA Toll Free T F liquid.csc@emerson.com LIQUID ANALYTICAL TRAINING CENTER Emerson Process Management Rosemount Analytical 2400 Barranca Parkway Irvine, CA USA Toll Free T F gas.csc@emerson.com 2013 Emerson Process Management. All rights reserved. The Emerson logo is a trademark and service mark of Emerson Electric Co. Rosemount Analytical is a mark of one of the Emerson Process Management family of companies. All other marks are the property of their respective owners. The contents of this publication are presented for information purposes only, and while effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and conditions, which are available on request. We reserve the right to modify or improve the designs or specifications of our products at any time without notice. SRV_BRO_2013_NATC