HPE 5510HI_5130HI-POE-V146 Release Notes

Transcription

1 HPE 5510HI_5130HI-POE-V146 Notes The information in this document is subject to change without notice. Copyright 2015,2016 Hewlett Packard Enterprise Development LP

2 Contents Version information 1 Version number 1 Version history 1 Hardware and software compatibility matrix 1 Upgrading restrictions and guidelines 2 Hardware feature updates 2 Hardware feature updates in V146 2 Hardware feature updates in V145 2 Software feature and command updates 2 Operation Changes 2 Operation changes in V146 2 Operation changes in V145 3 Restrictions and cautions 3 Open problems and workarounds 3 List of resolved problems 3 Resolved problems in V146 3 Resolved problems in V145 3 Support and other resources 3 Accessing Hewlett Packard Enterprise Support 3 Documents 4 Documentation feedback 4 i

3 List of Tables Table 1 Version history... 1 Table 2 Hardware and software compatibility matrix... 1 ii

4 This document describes the features, restrictions and guidelines, open problems, and workarounds for version 5510_5130HI-POE-V146. Before you use this version in a live network, back up the configuration and test the version to avoid software upgrade affecting your live network. Version information Version number Version number: 146 Note: You can see the version number with the command display poe pse in any view. Please see Note. Version history Table 1 Version history Version number Last version Date type Remarks 5510HI_5130 HI-POE-V HI_5130 HI-POE-V version Fixed bugs 5510HI_5130 HI-POE-V version Hardware and software compatibility matrix Table 2 Hardware and software compatibility matrix Item Specifications Product family 5510HI/5130HI Series HPE G PoE+ 4SFP+ 1-slot HI Switch JH325A HPE G PoE+ 4SFP+ 1-slot HI Switch JH326A Hardware platform HPE G PoE+ 4SFP+ HI 1-slot Switch JH147A HPE G PoE+ 4SFP+ HI 1-slot Switch JH148A Minimum memory requirements 2 GB Minimum Flash requirements 512 M PoE firmware version 146 PoE firmware files 5510HI_5130HI-POE-V146.bin Remarks Display the POE software versions of 5130HI: <HPE>dis poe pse 4 PSE ID : 4 1

5 Slot No. : 1 SSlot No. : 0 PSE Model : LSP8POED PSE Status : Enabled Power Priority : Low Current Power : 0.5 W Average Power : 0.5 W Peak Power : 8.1 W Max Power : W Remaining Guaranteed Power : W PSE CPLD Version : - PSE Software Version : 146 PSE Hardware Version : Legacy PD Detection : Disabled Power Utilization Threshold : 80 PD Power Policy : Disabled PD Disconnect-Detection Mode : DC Note 1 Upgrading restrictions and guidelines Hardware feature updates Hardware feature updates in V146 Hardware feature updates in V145 Software feature and command updates Operation Changes Operation changes in V146 2

6 Operation changes in V145 Restrictions and cautions Open problems and workarounds List of resolved problems Resolved problems in V Symptom: There is low possibility that the PDs lose power from the switch and then boot up again automatically. Condition: The switch supplies power to PDs. Resolved problems in V145 Support and other resources Accessing Hewlett Packard Enterprise Support For live assistance, go to the Contact Hewlett Packard Enterprise Worldwide website: To access documentation and support services, go to the Hewlett Packard Enterprise Support Center website: Information to collect: Technical support registration number (if applicable). Product name, model or version, and serial number. 3

7 Operating system name and version. Firmware version. Error messages. Product-specific reports and logs. Add-on products or components. Third-party products or components. Documents To find related documents, see the Hewlett Packard Enterprise Support Center website at Enter your product name or number and click Go. If necessary, select your product from the resulting list. For a complete list of acronyms and their definitions, see HPE FlexNetwork technology acronyms. Documentation feedback Hewlett Packard Enterprise is committed to providing documentation that meets your needs. To help us improve the documentation, send any errors, suggestions, or comments to Documentation Feedback (docsfeedback@hpe.com). When submitting your feedback, include the document title, part number, edition, and publication date located on the front cover of the document. For online help content, include the product name, product version, help edition, and publication date located on the legal notices page. 4