Welcome to the Cummins Fleet Service Training Program.

Transcription

1 Welcome to the Cummins Fleet Service Training Program. Prior to receiving this training program, your training manager should have provided you with an ID number. If you have not received an ID number, please contact your training manager before proceeding. Please insert the first CD-ROM of the certification program you wish to take. You may store your student records on any local hard drive or on a removable device such as a flash drive or memory stick. Insert your removable device prior to beginning, if you wish to use it.

2 Upon entering the Cummins Fleet Training for the first time, you will be asked to provide identification information. A Shop Code may also be used for the Shop Location field. Click SUBMIT after you have filled in all of the fields and selected a drive to store your student file. *Remember where you chose to store your student file.

3 If Cummins Fleet Training finds student files on the computer you are using, you will be shown a list of those file. If your ID is listed, select it. If your ID is not listed, select NEW USER. Selecting NEW USER will take you to the screen where you will be asked to provide identification information. (Previous page of this document)

4 You will be asked to verify the name and ID you selected. Click YES if the information is correct. Click NO if the information is not correct and you will be taken to the previous screen. If the ID is correct but the name is not, please contact your training manager.

5 The certification that is on the CD in your CD drive is shown at the top part of the screen in blue. If this is not the program that you want to view, insert the first CD of the certification that you do want to view into your CD drive and click READ CD. In the middle of the screen is a list of certifications that have been added to your student file. If the certification that you want to view is not in the list and is in blue above it, click the ADD button to add it to your student file. When the certification that you want to view is in your list, click on it. It will appear below the list in blue along with your completion status for that certification. Click GO to proceed to the certification.

6 When you enter a course within the certification, the Program Guide will be displayed. To begin viewing the course, click on a topic within the Program Guide. A green dot in the Program Guide will indicate the last topic you viewed. A red dot in the Program Guide indicates a topic missed in the assessments. A flashing arrow in the Program Guide indicates that no topic has been viewed in the course yet. The Course Number will be displayed in the top tool bar.

7 Click the BACK, Replay, Play/Pause and NEXT buttons to navigate the course. Click the Glossary, Help and PDF buttons for further information. Click the red arrow to view the Program guide. The bottom bar contains information about the course.

8 Most courses have an assessment following them. Clicking on the answer will highlight the answer. Click NEXT when you are satisfied with your answer.

9 At the end of an assessment, you will be given a list of topics for the questions that you missed, if you missed any. Clicking NEXT will take you back to the course to review the topics listed. All topics missed must be viewed in order to retake the assessment. You must answer all of the questions in the assessment to continue to the next course.

10 Upon completing the certification, you will be given the option of printing a certificate of completion for the certification. Shown below the certificate is the location of the file that you need to give to your training manager.

11 After the certification is complete, you will then be allowed to view any course within the certification. Click the course you want to view then click GO.