Cisco Exam Questions & Answers

Transcription

1 Cisco Exam Questions & Answers Number: Passing Score: 800 Time Limit: 120 min File Version: Exam Code: Exam Name: Cisco Connected Grid (Engineer) Knowledge Verification

2 Exact-Exams QUESTION 1 Which of the following models supports Power over Ethernet? A. CGS TC B. CGS S-8PC C. All CGS models D. None of the model supports POE /Reference: : QUESTION 2 Which of the following is not a supported PDI Help Desk function? A. design and configuration support B. technical product question C. implementation questions and support D. On site support E. RFP review Correct Answer: D

3 /Reference: : QUESTION 3 Which function is available on the Cisco Series 2500 Connected Grid Switch? A. EnergyWise B. inputs and outputs for alarms C. GRWIC modules D. StackWise /Reference: :

4 QUESTION 4 How many power supply slots are available on each Cisco CGR 2010 chassis? A. 1 slot B. 4 slots C. 2 slots D. No slots because all power is integrated over IP. Correct Answer: C /Reference: : QUESTION 5 What is the correct time delay for a critical GOOSE Type-1 message? A. There is no specific time delay requirement. B. Fewer than 10 ms

5 C. Less than 4 to 7 s D. Less than 3 to 10ms Correct Answer: D /Reference: : QUESTION 6 Which solution will allow remote engineering support for trouble or fault analysis? A. remote engineering access (VPN) B. network security C. physical access control D. network security /Reference: : QUESTION 7

6 Which two can use the Smart Grid PDI Help Desk? (Choose two.) A. everyone B. anyone with a CCO ID C. trained connect grid partners internal Cisco sales team members D. all Gold partners Correct Answer: CD /Reference: : QUESTION 8 Which one of these matches current Cisco Connected Grid solution applications? A. Retail B. Colocation facility C. Branch office D. Data Center E. Utility substation, intelligent energy infrastructure, distributed generation, integrated renewable energy and Oil/Gas Correct Answer: E /Reference: : QUESTION 9 What is the correct warranty coverage on Cisco Connected Grid products? A. 90 days B. 5 years C. 1 years D. 3 years E. 10 years /Reference: : QUESTION 10 What version of Cisco Configuration Professional support CGR and CGS products? A. version 2.0 or higher B. version 2.3 or higher C. version 2.0 or lower

7 /Reference: References: QUESTION 11 How many types of licenses are available for the Cisco CGR 2010? A. 5 licenses B. 4 licenses C. 3 licenses D. 2 licenses /Reference: : QUESTION 12 How many types of SMARTnet services are available for CGS and CGR products? A. 3 types B. 6 types

8 C. 5 types D. 2 types E. 4 types /Reference: : QUESTION 13 By 2015, how big is the Smart Grid market estimated to be (Pike Research estimate}? A. 500 Billion Dollars B. 200 Billion Dollars C. 400 Billion Dollars D. 300 Billion Dollars E. 100 Billion Dollars /Reference: : The answer to this question can be find in the Cisco Training material, module 1, second slide, available through the Partner education connection. QUESTION 14 What is the benefit of phasor measurement unit data? A. Workstations clock sync B. improves grid stability C. Time tag on all event /Reference: :

9 QUESTION 15 Which option is NOT one of the business drivers behind trends in the Global Energy Market? A. Cost of doing business B. Aging infrastructure and workforce C. Changing Grid Architecture D. Global warming E. New Consumer Interaction Model Correct Answer: E /Reference: : QUESTION 16 How long did Cisco test the CGR 2010 at 85'C? A. fewer than 20 hours B. 60 hours C. more than 20 hours D. more than 100 hours Correct Answer: D /Reference: :

10 QUESTION 17 Which two data flows are used with Substation Automation with GOOSE? A. IED RTU and IED MU B. IED IED and IED RTU C. IEDMU and IED IED D. IED HMI and IED IED /Reference: : QUESTION 18 Which of the following is the best way to open a TAC case? A. through the local account team B. using the U.S. Postal Service C. by fax D. using cisco.com Correct Answer: D /Reference: : QUESTION 19 How many types of power supply are available for CGS and CGR products? A. 1type B. 2 types C. 3 types D. 4 types /Reference: : QUESTION 20 What is Cisco's overall vision in the Smart Grid market? A. To design and architect governmental policies which can be integrated into the power grid. B. To design and architect Intelligent Electronic Devices which can be integrated into the power grid. C. To design and architect end-to-end solutions which can be integrated into the power grid. D. To design and architect point products which can be integrated into the power grid. E. To design and architect video cameras, which can be integrated into the power grid.

11 /Reference: : QUESTION 21 Which statement is correct concerning Goose messaging? A. K provides Type-1 messages at a 3- to 10-second delay. B. It uses of cost-effective, well-known protocols (Ethernet and IP). C. It is a proprietary protocol. D. ft has no data monitoring. /Reference: : QUESTION 22 Which section of NERC-CIP specifies physical security requirements? A. section 3 B. section 7 C. section 6 D. section 4 E. section 5 Correct Answer: C /Reference: : QUESTION 23 Which of these is part of mission critical substation? A. fault detection and restoration B. physical security alarm C. physical access (deny access) D. workstation /Reference: : QUESTION 24 Which product is included in the Cisco Smart Grid product offerings?

12 A. ISR 2900 Series and Catalyst 2960 B. All existing Cisco products C. Connected Grid Router CGR 2010 and Connected Grid Switch CGS 2520 D. Smart Grid 3000 ruggedized switching platform Correct Answer: C /Reference: : QUESTION 25 What is the function of security event data processed in real time for incident response and threat management? A. Cisco Physical Access Manager Client B. Video Surveillance Operation Manager C. Security Information Management D. Security Event Management Correct Answer: C /Reference: : QUESTION 26 Which of these is a grouping of elements that are part of the Cisco Substation Automation solution? A. data center and customer call centers B. customer call centers, electrical auto recharging, home energy management C. protection and control, grid monitoring, multi service communications networks D. multi service communications networks E. protection and control, auto meter reading, data analysis Correct Answer: C /Reference: : QUESTION 27 Which feature is supported by Cisco License Manager3.0? A. no role-based access B. ability to handle up to 500,000 devices C. free test license D. PDI helpdesk

13 /Reference: : QUESTION 28 What are features controlled on the Cisco CGR 2010? A. PAK license B. license soft key C. ISO image D. hardware key /Reference: : QUESTION 29 What are the two different types of console ports available? (Choose two.) A. Network B. USB C. RJ45 D. Firewall

14 C /Reference: : QUESTION 30 How many types of smart port macros are available for the Cisco CGS 2500? A. 1 type B. 2 types C. 3 types D. 4 types /Reference: : QUESTION 31 Why is IEC important within the energy / utility industry? A. the latest Cisco product for connected grid security B. define industry standard for design of electrical substations

15 C. a law recently passed in the United States D. a new routing protocol for electricity /Reference: : QUESTION 32 Refer to the exhibit. What does "ESP" represent? A. electronic substation protocol B. external substation protection C. electronic security perimeter D. external security perimeter Correct Answer: C /Reference: :

16 QUESTION 33 Which trend is driving the move toward Smart Grid? A. increases in supply, which requires the integration of distributed generation sources B. increasing carbon footprint C. compliance with regulations involving government funding and rules D. reduced demand, which causes an increase in demand and peak load Correct Answer: C /Reference: : QUESTION 34 Information available for MODBUS? A. system ID B. port 5TP state C. system name

17 /Reference: : QUESTION 35 What GRWIC module is available for CGR2010? A. Cable modem module B. LMR module C. one- and two-port Tl/El modules D. VMSS module E wireless module Correct Answer: C /Reference: : QUESTION 36 What will happen when only one power supply is ordered for each CGS or CGR? A. A warning label reminds the user to order a blank cover. B. A blank cover will be shipped with the unit. C. The user will be reminded to order an additional power supply. D. Nothing will happen. E. The order will not be processed. /Reference: : QUESTION 37 Which Cisco IOS software packages are not supported on the Cisco CGR 2010? A. UC packages B. IP Base C. Advanced Security D. Advanced IP Services /Reference: : QUESTION 38 Which statement about the CGR2010 is correct?

18 A. The cooling system and the hard drive have moving parts. B. Only the cooling system has moving parts. C. Only the hard drive has moving parts. D. There are no CGR 2010 components that have moving parts. Correct Answer: D /Reference: : html QUESTION 39 Hat is the most common deployment network requirement for precise timing distribution? A. broadband and fiber B. integration with LDAP C. segmentation (isolation of critical data) D. GPS clock at substation with IRIG-B Correct Answer: D /Reference: : QUESTION 40 Which of these is a network requirement for remote workforce management? A. user authentication B. physical access control C. Cisco Telepresence D. Cisco Unified Communications Manager Express /Reference: :

19 QUESTION 41 Cisco recommends that you always start to populate the Cisco CGR 2010 from which slot? A. Slot 0 B. Slotl C. Slot 2 D. Slot 3 /Reference: : QUESTION 42 Why is the blank cover needed when there is only one power supply in use? A. Blank covers are required by the NERC/CIP Standards Committee. The system can only support one power supply. B. To maintain the correct ventilation and environmental rating for the system. C. To ensure that the equipment has a uniform color appearance. /Reference: :

20