PRODUCT CATALOGUE. Rev A HEXATRONIC.SE
|
|
|
- Leon Fleming
- 6 years ago
- Views:
Transcription
1 PRODUCT CATALOGUE Rev A HEXATRONIC.SE 1
2
3 Contents THE FLEXFIELD CONCEPT...4 RACKS AND SUBRACKS...6 DDF MODULES AND ACCESSORIES...8 ETHERNET MODULES AND ACCESSORIES ODF MODULES AND ACCESSORIES HEXATRONIC.SE 3
4 The FlexField Concept FlexField the most flexible cross connection system Handles coax, pair and opto cables. Meets telecom standard G.703. Handles data Ethernet Cat 6. Built on modules fits small as well as big systems. WIDE VARIETY OF CABLES AND CONNECTORS The module is the basic unit. There are modules to handle a variety of cables and connectors. A LOW COST MIX OF MODULES FOR SMALL OR BIG INSTALLATIONS Modules are hosted in the subrack, with five sizes of subracks available. Different types of modules for different connectors/cables can be mounted in the same subrack. Start with the number of modules needed to partly fill the subrack and then add modules as needed. 4 HEXATRONIC.SE
5 PROBLEM-FREE ACCESS TO ALL CONNECTORS, WITH CABINETS TO THE WALL Due to the patented cable management in the module there is always access to all connections. The cable management creates a built in cable slack that allows the module to always be extracted a minimum of 30 cm from it s original position even at full installation. The fiber optic modules have additional movement they can be extracted 1.5 m. All terminations are accessible from the front. This means that the cabinets can be placed tightly side by side to a wall. 19 AND ETSI RACKS/CABINETS ALL TYPES The subracks have mounting ears adjustable in width and depth. SAFE MAINTENANCE AND QUICK ACCESS There is no stress on the connectors when moving the modules, as the cables are mechanically fixed to the modules. PATCH CORDS ARE WELL PROTECTED Patch cords are strictly managed and well protected. The patch cords from each module enter through their own slot into the cable shelf. The cable shelf has a foldable front, which allows quick access. HEXATRONIC.SE 5
6 Racks & Subracks HIGH DENSITY, SERVICE FRIENDLY PATCH CORD MANAGEMENT Racks Designed for large amounts of patch cords. Patch cord crossing between racks is possible at the top. No need for threading patch cords. All passages are open. Bending radius min. 30 mm is guaranteed. At the top of the rack there is a built in cable duct. This replaces the overhead mounted cable duct. The rack has surface treatment with very good electrical conductivity. The rack has a grounding rail for 10 connections. Subracks The subrack comes in 5 sizes. Number of modules 1 10 pcs, height 1 5u. All subracks give front access to all connection points, which makes this system service friendly. FlexField Rack 2000 Part no Rack with 19 profiles. Height 2050, width 600, depth 400. Inside height 42u. Cable management handles up to 4000 patch cords. No need for threading patch cords. All passages ore open. Bending radius min. 30 mm is guaranteed. Surface treatment with very good electrical conductivity. Grounding rail for 10 connections. When 2 racks are positioned side by side with center distance 800 mm there will be a storage for patch cord overlength. This can handle up to 4 meters overlength. 6 HEXATRONIC.SE
7 FlexField Subrack 200 Part no. 5087/20 Capacity 10 modules. Fits in ETSI and 19 rack/cabinet. Adjustable mounting ears. Distance front rack mounting point 30 alt. 80 mm. Dimensions HxD 199(5u) x 270 mm. Signing strip. FlexField Subrack 45 Part no. 5087/13 Capacity 2 modules. Fits in ETSI and 19 rack/cabinet. Adjustable mounting ears. Distance front rack mounting point 30 alt. 80 mm. Dimensions HxD 44(1u) x 270 mm. Signing strip. FlexField Subrack 133 Part no Capacity 10 modules. Fits in ETSI and 19 rack/cabinet. Adjustable mounting ears. Distance front rack mounting point 30 alt. 80 mm. Dimensions HxD 133(3u) x 195 mm. Possibility to use bending radius limiter. FlexField Wall Mount Box Part no. 5087/30 Capacity 1 module. Dimensions HxWxD: 190x130x45 mm. HEXATRONIC.SE 7
8 DDF Modules & Accessories HIGH PACKING DENSITY, SERVICE FRIENDLY High packing density is easily met. More than 400 coax systems or more than 800 pair cable systems can be installed in one rack/cabinet. Still all connections will be accesible and cross connection work can easily be performed. Transmission Requirements G.703 All signals pass through multi-layer impedance controlled PCB s and connectors of correct impedance. This gives good signal integrity and the transmission requirements in G.703 are met. The SWR budget of your link will not be ruined by FlexField. EMC All PCB s have signal at the inner layers and shielding at the outer layers. The cable shields are terminated at low impedance. This result in low emission and high immunity. EMC-standards like directives 89/336/EEC, 92/331 EEC are fulfilled. Surge Pulse In some telecom applications there is a 500V surge pulse requirement. All FlexField modules fulfill this. They are tested according to IEC HEXATRONIC.SE
9 FlexField Module RJ - IDC Part no. 5100/01 Pair cable, 2 Mbit/s, E1/T1/J1. 8 systems. Front: RJ45/48. Inside: IDC termination, 16 pair. Isolation: mm. Low impedance termination of shield. FlexField Module RJ - IDC Monitor Part no. 5100/27 Pair cable, 2 Mbit/s, E1/T1/J1. 4 systems with monitor ports. Front: RJ45/48, RJ45/48 25dB monitor ports. Inside: IDC termination, 8 pair. Isolation: mm. Low impedance termination of shield. FlexField Module RJ - RJ Part no. 5100/02 Pair cable, 2 Mbit/s, E1/T1/J1. 8 systems. Front: RJ45/48. Inside: RJ45/48. FlexField Module RJ - RJ Monitor Part no. 5100/26 Pair cable, 2 Mbit/s, E1/T1/J1. 4 systems with monitor ports. Front: RJ45/48, RJ45/48 25dB monitor ports. Inside: RJ45/48. HEXATRONIC.SE 9
10 FlexField Module IDC - IDC Part no. 5100/15 Pair cable, 2 Mbit/s, E1/T1/J1. 8 systems. IDC termintion, pair. Isolation: mm. Low impedance termination of shield. FlexField G.703 Pair Cable Monitor Cable Part no. 3408/P100/K100 Suitable for modules 5100/26, 5100/27. To be used when the test instrument has BNC 75Ω interface. Length 2 m. FlexField G.703 Coax Monitor Cable Part no. 3102/200 Suitable for modules 5100/09, 5100/31, 5100/32, 5100/40, 5100/41, 5100/43. To be used when the test instrument has BNC 75Ω interface. Length 2 m. FlexField Module 1,6/5,6-1,6/5,6 Part no. 5100/04 Coax 75Ω Mbit/s, E1/T1/J1/E3/T3/J3/STM-1. Front: 1.6/5.6 Jack. Inside: 1.6/5.6 Jack. 10 HEXATRONIC.SE
11 FlexField Module 1.6/ /5.6 Monitor Part no. 5100/31 Coax 75Ω Mbit/s, E1/T1/J1/E3/T3/J3/STM-1. 4 systems with monitor ports. Front: 1.6/5.6 Jack, M4 Jack 25dB monitor ports. Inside: 1.6/5.6 Jack. FlexField Module M4 - M4 Part no. 5100/06 Coax 75Ω Mbit/s, E1/T1/J1/E3/T3/J3/STM-1. Front: M4 Jack. Inside: M4 Jack. FlexField Module M4 - M4 Monitor Part no. 5100/32 Coax 75Ω Mbit/s, E1/T1/J1/E3/T3/J3/STM-1. 4 systems with monitor ports. Front: M4 Jack, M4 Jack 25dB monitor ports. Inside: M4 Jack. FlexField Module BNC - BNC Part no. 5100/08 Coax 75Ω Mbit/s, E1/T1/J1/E3/T3/J3/STM-1/video. Front: BNC Jack. Inside: BNC Jack. HEXATRONIC.SE 11
12 FlexField Module BNC - BNC Monitor Part no. 5100/09 Coax 75Ω Mbit/s, E1/T1/J1/E3/T3/J3/STM-1/video. 3 systems with monitor ports. Front: BNC Jack, M4 Jack 25dB monitor ports. Inside: BNC Jack. FlexField Module 1.0/ /2.3 Part no. 5100/34 Coax 75Ω Mbit/s, E1/T1/J1/E3/T3/J3/STM-1. Front: 1.0/2.3 Jack. Inside: 1.0/2.3 Jack. FlexField Module 1.0/ /2.3 Monitor Part no. 5100/35 Coax 75Ω Mbit/s, E1/T1/J1/E3/T3/J3/STM-1. 4 systems with monitor ports. Front: 1.0/2.3 Jack, M4 Jack 25 db monitor ports. Inside: 1.0/2.3 Jack. FlexField Module BT43 - BT43 (SMB 75Ω) Part no. 5100/42 Coax 75Ω Mbit/s, E1/T1/J1/E3/T3/J3/STM-1. Front: BT43 Jack. Inside: BT43 Jack. 12 HEXATRONIC.SE
13 FlexField Module BT43 - BT43 Monitor (SMB 75Ω) Part no. 5100/43 Coax 75Ω Mbit/s, E1/T1/J1/E3/T3/J3/STM-1. 4 systems with monitor ports. Front: BT43 Jack, M4 Jack 25dB monitor ports. Inside: BT43 Jack. FlexField Module 1.6/5.6 - IDC Balun Part no. 5100/10 Pair cable coax 75Ω 2 Mbit/s, E1/T1/J1. Front: 1.6/5.6 Jack. Inside: IDC termination, 8 pair. Isolation: mm. Low impedance termination of shield. FlexField Module 1.6/5.6 - IDC Balun Monitor Part no. 5100/41 Pair cable coax 75Ω 2 Mbit/s, E1/T1/J1. Front: 1.6/5.6 Jack, M4 Jack 25 db monitor ports. Inside: IDC termination, 8 pair. Isolation: mm. Low impedance termination of shield. FlexField Module M4 - IDC Balun Part no. 5100/11 Pair cable coax 75Ω 2 Mbit/s, E1/T1/J1. Front: M4 Jack. Inside: IDC termination, 8 pair. Isolation: mm. Low impedance termination of shield. HEXATRONIC.SE 13
14 FlexField Module M4 - IDC Balun Monitor Part no. 5100/40 Pair cable coax 75Ω 2 Mbit/s, E1/T1/J1. Front: M4 Jack, M4 Jack 25 db monitor ports. Inside: IDC termination, 8 pair. Isolation: mm. Low impedance termination of shield. FlexField Module BNC - IDC Balun Part no. 5100/12 Pair cable coax 75Ω 2 Mbit/s, E1/T1/J1. Front: BNC Jack. Inside: IDC termination, 8 pair. Isolation: mm. Low impedance termination of shield. FlexField Module RJ - M4 Balun Part no. 5100/23 Pair cable coax 75Ω 2 Mbit/s, E1/T1/J1. Front: RJ45/48. Inside: M4 Jack. FlexField Module RJ - BNC Balun Part no. 5100/24 Pair cable coax 75Ω 2 Mbit/s, E1/T1/J1. Front: RJ45/48. Inside: BNC Jack. 14 HEXATRONIC.SE
15 FlexField Module RJ - 1,6/5,6 Balun Part no. 5100/25 Pair cable coax 75Ω 2 Mbit/s, E1/T1/J1. Front: RJ45/48. Inside: 1,6/5,6 Jack. HEXATRONIC.SE 15
16 Ethernet Modules & Accessories THE PATCH PANEL High density performance, more than 800 systems in a standard rack. Yet service friendly, the patch cords are strictly organized and all connections will be accesible so crossconnection work can easily be performed. Choose between modules for Cat5e or Cat6, STP or UTP. You may also terminate the fiber optic riser cable and the PABX in the same patch panel. For fiber optics see section ODF. The work area outlet 8 RJ45 for 1 4 workplaces. Choose between modules for Cat5e or Cat6, STP or UTP. DC-current in cable shield In an STP cabling there is always risk for unwanted DC-current in the shield due to varying ground potentials in the building. This causes a current to flow in the cable shields and this may give lower capacity in your network. To avoid this there is a module with built in dc-barrier, 5100/17. FlexField Module RJ - IDC Ethernet STP/UTP Cat5e Part no. 5100/16 Ethernet 10/100 shielded and unshielded twisted pair. 8 systems. Front: RJ45. Inside: IDC termination. Isolation: mm. FlexField Module RJ - RJ Ethernet STP/UTP Cat5e Part no. 5100/02 Ethernet 10/100 shielded and unshielded twisted pair. 8 systems. Front: RJ45. Inside: RJ HEXATRONIC.SE
17 FlexField Module RJ - JDC Ethernet UTP Cat6 Part no. 5100/38 Ethernet 10/100 Gigabit ethernet unshielded twisted pair. 6 systems. Front: RJ45. Inside: IDC termination. Isolation: max 1.27 mm. FlexField Module RJ - IDC Ethernet STP Cat6 Part no. 5100/39 Ethernet 10/100 Gigabit ethernet shielded twisted pair. 6 systems. Front: RJ45. Inside: IDC termination. Isolation: max 1.27 mm. FlexField Module RJ - IDC Ethernet STP Cat6 with DC-barrier Part no. 5100/17 Equipped with DC-barrier to stop flow of DC-current in cable shields. EMC safe design. Ethernet 10/100/Gigabit ethernet shielded twisted pair. Front: RJ45. Inside: IDC termination. Isolation: mm. FlexField Module RJ - IDC Ethernet UTP Cat3 Part no. 5100/36 Telephone signals 64 kbit/s. For termination of PABX. Unshielded twisted pair. 10 lines. Front: RJ45. Inside: IDC termination, 20 pair. Isolation: mm. HEXATRONIC.SE 17
18 ODF Modules & Accessories ODF FOR TRUNK NETWORKS, FIBER TO THE X, LAN Thanks to its modular design FlexField makes an ODF for a variety of applications. The FlexField fiber optic module handles 12 fibers. It holds splices, both single fiber and ribbon fiber and it holds fanouts. Break-out cable and micro ducts also fit. Versions with SC adapters and FC adapters are available. An ODF from twelve to thousands of fibers can be built. Splicing Splices of various sizes are accepted. Defined positions give good overview. Minimum bending radius is guaranteed. 18 HEXATRONIC.SE
19 Cleaning The front with the adapters can be pulled out. This makes it possible to clean the inner connectors. Service Friendly The fibers enter the module through a flexible tube. This is of length 1.5 meter. This gives the benefit that the splicing work can be done with the module conviniently placed on a working bench, out of the cabinet. When inserting the module in the cabinet, the flexible tube is rolled up and stored in the module. Joint The cable is coupled to the flexible tube by a joint. To the left is shown Joint 48, handling a cable with maximum 48 fibers. Break Out Cable There is also a module for cables without splices and having low bending radius being able to be brought directly into the module: break out cable; patch cord cable. No joint is used. HEXATRONIC.SE 19
20 FlexField Module Break Out SC Part no. 5100/136 For cables with connectors: break out cable; patch cord cables. Cable bending radius maximum 45 mm. 12 fibers. SC adapters of SM quality, 6x2. FlexField Module Splicing SC Part no. 5100/296 For splicing of ribbon fiber or single fiber. Length of splice maximum 45 mm. 12 fibers. The cable is connected to this module using joint 48. SC adapters of SM quality, 6x2. FlexField Module splicing SC, Preconnected Part no. 5100/306 For splicing of ribbon fiber or single fiber. Length of splice maximum 45 mm. Preconnected with 12 pcs of pigtails, SM 10/125 UPC. 12 fibers. The cable is connected to this module using joint 48. SC adapters of SM quality, 6x2. FlexField Module Break Out FC/PC Part no. 5100/37 For cables without splices and having low bending radius being able to be brought directly into the module: break out cable; patch cord cable. 8 fibers. FC/PC adapters of SM quality, 8x1. 20 HEXATRONIC.SE
21 FlexField Pigtail SM 10/125 SC/UPC Part no. 4P021000/01/0100 Single fiber 10/125. Length 1 m. Diameter 0.9 mm. Connector SC UPC. FlexField Pigtail MM 50/125 SC Part no. 4P101000/01/0100 Single fiber 50/125. Length 1 m. Diameter 0.9 mm. Connector SC. FlexField Pigtail MM 62.5/125 SC Part no. 4P201000/01/0100 Single fiber 62.5/125. Length 1 m. Diameter 0.9 mm. Connector SC. FlexField Module Patch Cord Storage Shelf Part no. 5100/14 Storage of patch cord overlength. 12x5 m 2 mm cable can be stored. Occupies the space of 2 modules in the sub rack. Dimension W 80 mm. HEXATRONIC.SE 21
22 FlexField Module Patch Cord Storage Bobbin Part no. 5100/19 Storage of excess patch cord. 12x3 m 2 mm cable can be stored. Occupies the space of 1 module in the subrack. Dimension W 40 mm. Bending radius min 30 is mechanically controlled. Bending Radius Limiter 1u Part no pair. Fits in subrack Dimensions H 45 mm (1u). Can be mounted and unmounted with subrack mounted in the rack. Protects patch cords from sharp bending. Quick mounting. Bending Radius Limiter 2u Part no pair. Fits in subrack 133. Dimensions H 88 mm (2u). Can be mounted and unmounted with subrack mounted in the rack. Protects patch cords from sharp bending. Quick mounting. FlexField Joint 48 Part no For joining a cable containing maximum 48 fibers to maximum 4 Modules 5100/296 or 5100/ HEXATRONIC.SE
23
24 Hexatronic Network Solutions Hexatronic Network Solutions is a Swedish based company which focuses on high quality products and solutions within four business areas: Connecting Hardware, Active Networks, Industry and Fiber Optics. With a wealth of experience, extensive knowledge and a great interest in our customers, we develop and manufacture products and solutions with the goal of helping our clients to become more competitive. Our corporate headquarters is in Gothenburg and we have offices in Skellefteå and Stockholm. A part of Hexatronic Group Hexatronic Group specializes in product and system solutions primarily within fiber communications. The Group offers a broad range of products and system solutions with a focus on infrastructure for passive fiber optics. Hexatronic has the stability and resources of a large Group, combined with the flexibility and speed of a small company. Hexatronic is based in Sweden, but operates in a global market. Our customers are companies in the telecommunications industry, such as telecom operators, network owners, distributors and systems integrators. The Groups headquarters are in Sweden with sales offices and subsidiaries in Sweden, Norway, Finland, China, Great Britain, New Zealand and the United States. The Hexatronic share is listed on Nasdaq Stockholm. For more information about Hexatronic Group: Hexatronic Network Solutions, Sofierogatan 3A, SE Göteborg, Sweden Tel +46 (0) info@hexatronic.se linkedin.hexatronicpartners.se twitter.hexatronicpartners.se youtube.hexatronicpartners.se issuu.hexatronicpartners.se facebook.com/hexatronic
OMEGA MODULAR PATCH PANEL EMPTY ENCLOSURE
OMEGA MODULAR PATCH PANEL EMPTY ENCLOSURE The Omega MPP enclosure is based on a 19" frame, with 4 empty module slots for MPP modules. Highly flexible : any mix between twisted pair and optical fiber modules.
Cabling Infrastructure
Introduction Ethernet Banking on Structured Cabling Technology Drivers Classification of Cables Fibre-optic cable Cables in building Cabling Infrastructure Cabling systems address the networking requirements
TRAINING & CERTIFICATION. An Investment in Knowledge Increases Your Competitive Edge
TRAINING & CERTIFICATION An Investment in Knowledge Increases Your Competitive Edge Competence Provider for Realization of Effective and Structured Broadband Projects Operators and network owners are increasing
Cabling Solutions Data Center & Local Area Networks
Cabling Solutions Data Center & Local Area Networks R&M About us. «R&M is a leading provider of cabling solutions for high quality communication networks.» R&M (Reichle & De-Massari AG) has developed and
LiSA ODRF (ETS) features. HUBER+SUHNER Excellence in Connectivity Solutions
LiSA ODRF (ETS) features Central Office Optical Distribution Rack Front-Access Modular ETS rack system width 300/600/900/1200mm hight 2200mm -2- Modular ETS rack system width 300/600/900/1200mm hight 2200mm
FACT OPTICAL DISTRIBUTION FRAME SYSTEM
FACT OPTICAL DISTRIBUTION FRAME SYSTEM Fiber Connectivity for Splice/ Patch and Patch/Patch For almost 30 years, TE Connectivity has led the industry with solutions such as FIST fiber management system,
Responsive Innovative Scalable SOLUTION OVERVIEW
Responsive Innovative Scalable SOLUTION OVERVIEW TOP OF RACK 10/40G AND 25/100G PARALLEL OPTICS SOLUTION Top of Rack (ToR) distribution panel provides a 1U host for eight modules, each designed to hold
with its cables, connectors, Switches, Hubs and topologies
Introduction to LAN www.mycsvtunotes.in with its cables, connectors, Switches, Hubs and topologies LAN Small interconnected computers or workstations within a building or small area up to 10 Kms. Small
Flexibility and High Density
Flexibility and High Density High Density High Durability High Diversity DataVoice Modular Patch Panel HD³ Flexibility and high density for optimum results. Space is expensive, especially in data centres
Fiber Management Systems
FIBER OPTIC PRODUCTS CATALOG OF ALL PRODUCTS WWW..COM Fiber Management Systems Wall Mount Fiber Management System Stand Alone Floor Mount Fiber Rack Mount Fibre Management System Fixed Type ODF Sliding
16 way 19 1½U enclosure with rear cable management tray NPGZM-16-NJ. ½U high front mounting cable management tray
Features: Connects 75 ohm coaxial and 120 ohm twisted pair cabling systems Supports all G.703 data rates up to 34 Mbps Snap-in modules are easy to install and maintain Field expandable and upgradable Various
Tykoflex Splice System
for 9 /ETSI optical fibre racks T YKOFLEX SPLICE SYSTEM Tykoflex Splice System About Tykoflex With telecom and fibre optics technology now being used for a large number of applications such as telephony,
Section 15 Cable Demarcation Enclosure
Cable Demarcation Enclosure: Section 15 Section 15 Cable Demarcation Enclosure Table of Contents Page Cable Demarcation Enclosure...15-2 Cable Demarcation Enclosure Maximum Protection The enclosure is
Uniprise Structured Cabling Solutions Guide
Uniprise Structured Cabling Solutions Guide Exceptional value, proven reliability You re not unrealistic. You re simply looking for a reliable and affordable structured cabling solution; a single portfolio
Cables and Connectors
Module 2 Cables and Connectors Twisted Pair Two wires that carry the data signals (one conductor carries a positive signal; one carries a negative signal). Two wires are twisted to reduce the effects of
Optotec. A high tech company providing passive components & accessories for telecommunications networks. Company Profile Connecting
Optotec A high tech company providing passive components & accessories for telecommunications networks Company Profile 2010 1 Connecting 18 years of experience in fibre optic Who we are? o Founded in 1992
Cat.6/5e UTP Patch Panels with 45 Jack
Cat.6/5e UTP Patch Panels with 45 Jack Index TOOL KITS TOOL WIRING CONNECTORS LAN/DATACOMM INSTRUMENT MISCELLANEOUS POWER TOOLS FIBER OPTICS MAGNIFICATION & Our Cat.6/5e patch panels are used for high
Voice Integration Overview
Voice Integration Overview 010.2936 Intelligent voice integration Highest packing density Modular design Efficient and tool-free connection technique Comprehensive product range Ingenious labelling system
Siemon PON Fiber Cabling Solutions
Siemon PON Fiber Cabling Solutions WWW.SIEMON.COM 8 Siemon Enterprise PON Fiber Cabling Solution Siemon Enterprise Passive Optical Network (PON) Fiber Cabling Solution improves the modularity, flexibility
+91-8048409600 Digamber Telecom http://www.sancharcable.com/ We are a reputed manufacturer and supplier of Telecom Industrial Products & Cables that is working hard from over many years to achieve utmost
9/27/04 cci Cablecom Inc. 1
cci Cablecom Inc. 1 CCI Cablecom Inc. is a privately held, women owned corporation headquartered in Aurora, CO. We manufacture a variety of voice and datacom products. Cable applications Include: Local
Overview of WT&T LED light sources (fiber-coupled and free-space) WT&T Inc. Contact:
Overview of WT&T LED light sources (fiber-coupled and free-space) WT&T Inc. Contact: sales@wttechnology.com 2005-2015 WT&T Inc, all rights reserved Compact, high power, single channel fiber-coupled LED
insilco. intelligent networking. insilco. intelligent networking
insilco intelligent networking 04-07 - 2017 insilco intelligent networking 28-10 - 2016 Contents Intelligent Network Management System 01 Network Scanner 02 Smart Patch Panels 03 Smart Patch Cords, Flat
FMT4S. High Density Connectivity Solution
FMT4S High Density Connectivity Solution 2 FMT4S Solution Illustration FMT4S Optical Distribution Frame (ODF) FMT4S series is an advanced ODF series offering premium quality Data Center connectivity solution.
Cozlink FTTH ODN Products
Cozlink FTTH ODN Products Along with the fast deployment of fiber-to-the-x technology and its application worldwide Cozlink Technology offers an end-to-end infrastructure solution for central office (CO),
TIA/EIA 568A Sub-system HORIZONTAL CABLING
TIA/EIA 568A Sub-system HORIZONTAL CABLING Horizontal Cabling WA 100(120)Ω CAT 3 TP TP 100(120)Ω CAT 5 150Ω STP-A 62.5(50)/125µ FIBER HC/FD WA Horizontal Media Considerations UTP/FTP Consider bandwidth,
3M ID 3000 System. ID 3128 block. Disconnection module. ID 3100 block Wire guide housing
3M ID 3000 System ID 3128 block Disconnection module ID 3100 block Wire guide housing 71 Disconnection element 72 The ID 3000 connection system is the latest generation of insulation displacement connector
OPTICAL CABLE & CABLE ASSEMBLY
OPTICAL CABLE & CABLE ASSEMBLY FIBER OPTIC INDOOR CABLE MM 50 m (OM2) MULTI LOOSE TUBE CABLE Indoor Thight Buffer LSOH, 4 core NVLINMM2004LSOH MM 62.5 m MM 50 m (OM2) MM 50 m (OM3 550+/ OM4) Direct Burial
The following pages contain a guide for the installation
INDEX The goal of this section is to illustrate how Siemon Company products can be used to support some of the most popular and emerging networks on the market. Section Contents 100Base-T....................................
Product information 19" 3U Global Patch Panel 48xRJ45/u, Cat. 6, partly populated R302361
Product information 19" 3U Global Patch Panel 48xRJ45/u, Cat. 6, partly populated R302361 1 Pcs. 19" 3U Global patch panel/u incl. cable tie shelf 12 connection module holders Global/u 3 Global blind covers
Description and Assembly Instructions
Description and Assembly Instructions Modular Industrial Patch Panel Release 01 12/11 Technical Support HAC.Support@Belden.com The naming of copyrighted trademarks in this manual, even when not specially
Ordering Guide for FIST Blue Label Racks (FIST-GR3)
Page 1 of 13 Ordering Guide for FIST Blue Label Racks (FIST-GR3) This document provides assistance with the selection of racks for use in FIST applications. It includes the following sections: 1 Product
The Riser as a Contract Document. Peter Sharp, RCDD
The Riser as a Contract Document Peter Sharp, RCDD IBI Group 1 1 Who am I? Presenter Credentials Electrical Engineer Specialties in communications, electronics and computer sciences, In practice for 40
Metropolis ADM MultiService Mux Compact Shelf
Metropolis ADM MultiService Mux Compact Shelf Engineering and Ordering Information Release 5.0 ED8C938-10 Issue 5 13-May-2005 AN55 Copyright 2005 Lucent Technologies All Rights Reserved A A About This
TELECOMMUNICATION SOLUTIONS
42 44 47 47 50 52 VDI_RACK - STANDARD SOLUTION VDI_RACK - MODULAR CONSTRUCTION ACCESSORIES FIBER OPTIC PATCH CORDS SIGNAL SPLITTERS (PC/ CC/ FO) FOR TELECOM CABINETS S ENCLOSURES AND CABINETS Free online
Fiberoptic G.703 Codir - IEEE C37.94 converter, Technical manual. Technical Manual 90_20_0101_r2.doc
Fiberoptic G.703 Codir - IEEE C37.94 converter, 21-216 Technical manual Technical Manual 90_20_0101_r2.doc About this manual About the contents of this manual The information in this document may be changed
TELECOMMUNICATION SOLUTIONS
42 44 47 47 50 52 VDI_RACK - STANDARD SOLUTION VDI_RACK - MODULAR CONSTRUCTION ACCESSORIES FIBER OPTIC PATCH CORDS SIGNAL SPLITTERS (PC/ CC/ FO) FOR TELECOM CABINETS TELECOMMUNICATIONS ENCLOSURES AND CABINETS
Technical Description
Technical Description R&M FiberModul Version 1.0 Seite 1/11 Contents 1.0 THE CONCEPTION FO 19" 3HE... 3 2.0 THE FIBERMODUL... 4 3.0 THE CONSTRUCTION... 4 4.0 THE MODULAR PRINCIPLE... 5 5.0 DESCRIPTION
BROADBAND NETWORKS. Local Area Networks Private Networks
BROADBAND NETWORKS Local Area Networks Private Networks 1 BROADBAND FOR EVERYONE European countries plan to organize comprehensive broadband connection in every country including low populated and rural
Compact Module. Category 6 UTP Cabling System
Compact Module Suitable for Gigabit Ethernet applications Shallow design requires minimal back-box depth Interchangeable with all other Euro modules and quarter blanks Fits all standard Euro faceplates
5/8-Port Industrial Fast Ethernet Switch ISW-500/ISW-800. User's Manual
5/8-Port Industrial Fast Ethernet Switch ISW-500/ISW-800 User's Manual Trademarks Copyright PLANET Technology Corp. 2006. Contents subject to which revision without prior notice. PLANET is a registered
Field-terminated RJ45 connector with housing. Color housing: gray (RAL 7042). Color termination block: red.
FM45 Connector Cat. 6 A IP20, 4P, TIA 568-A/B, 10x R815651 966704105 10 Stk. 090.7437 / ähnliche Abbildung Instruction manual Field-terminated connector with housing. Color housing: gray (RAL 7042). Color
BGP Support for Ipv6. Switch should have virtualization feature as one or more switch can act as a single Switch or equivalent IP clustering
Minutes of the Pre-Bid Meeting - NATIONAL COMPETITIVE BIDDING FOR THE SUPPLY, Installation and Commissioning of LAN at 9 DH along with 2 ZH F.2 (499)/RHSDP/EPMC/HMIS/ NCB/4881 Dated 09.11.2010 Sl. Description
FO Trunk Cable. FO Trunk Cable
5 FO Trunk Cable www.easylan.de FO Trunk Cable u 2 to 144 fibers u Various cable types u PC and APC polish u Tuned connectors u Gradations as desired u Up to IP67 u etc. 104 05 FO Trunk Cable Contents
FP front panel. Features: Modular design 1U or 2U version Connector panels or brush entry
FP front panel The FP front panel introduces a low cost solution for fiber optic cable termination. The modular design can accept wide range of optical fibers capacity with various connector types. Modular
LC Connector. A High Density Fiber Optic Network Solution. Paul Kolesar Lucent Technologies, Bell Laboratories
A High Density Fiber Optic Network Solution Paul Kolesar Lucent Technologies, Bell Laboratories IEEE 802.3z Gigabit Ethernet March, 1997 Outline Design Background and Goals Product Family Overview Features
DVBus , and Multiplexer and demultiplexer assemblies for video channels USER MANUAL
DVBus 8050-16, 8050-24 and 8050-32 Multiplexer and demultiplexer assemblies for 16-32 video channels USER MANUAL 1. Description DVBus 8050 systems transmit 10-bit digitized video signals over one optical
Cisco ONS CL Shelf Assembly Hardware
CHAPTER 1 This chapter provides a description of Cisco ONS 15310-CL shelf hardware. Instructions for installing equipment are provided in the Cisco ONS 15310-CL and Cisco ONS 15310-MA Procedure Guide.
Patch by Exception Module Jackfield User Manual
ADCP-0-00 Issue, October 99 Patch by Exception Module Jackfield User Manual Content Page TRODUCTION... Revision History.... GENERAL.... DESCRIPTION... A. Functional Description... B. Physical Description....
Data Centre Solutions MPO Connectivity with OM3 or OM4 fibre
Data Centre Solutions MPO Connectivity with OM3 or OM4 fibre With this product line 3M offers state of the art connectivity for data centre cabling. The patented modular construction combines highest port
Introduction to LAN Topologies Cabling. 2000, Cisco Systems, Inc. 3-1
Introduction to LAN Topologies Cabling 2000, Cisco Systems, Inc. 3-1 Objectives Upon completion of this chapter, you will be able to perform the following tasks: Media / Cabling Local Area Network Cabling
FIBRE ENCLOSURES AND SPLICING ACCESSORIES
F/ F/ Assemblies, 8.0 W W W. S I E M O N. C O M SECTION CONTENTS Rack Mount Interconnect Centre.............. 8. 8. Wall Mount Interconnect Centre...............8. 8.5 F/ Mini Wall Mount Interconnect Centre...............8.5
CONEC Industrial Ethernet Circular Sealed RJ45 Connector System consists of a RJ45 Plug Kit, a Receptacle Kit and a Protective Cover Assembly.
Revised Sept-28-2009 Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System Instructions CONEC Industrial Ethernet Circular Sealed RJ45 Connector System consists of a RJ45 Plug Kit, a Kit
Physical Layer V What does the physical layer provide?
SEMESTER 1 Chapter 8 Physical Layer V 4.0 90 Points 8.1.1 What does the physical layer provide? What are the four elements of delivering frames across the media? 8.1.2 What are the three basic forms of
FTTE Revisited for New Technologies
FTTE Revisited for New Technologies A new look into FTTE design to allow great flexibility as well as compliance to the latest 40G and 100G. Gautier Humbert, RCDD, CDCDP Business Development Manager Eastern
SOFIX - A fully shielded front IO solution. Product Presentation
- A fully shielded front IO solution Product Presentation Product Description SOFIX is a front IO interconnection system comprised of R/A headers and cable plugs, suitable for the distribution of power
Case Study Sollentuna Energi: A Broadband Pioneer. Sollentuna Energi: A Broadband Pioneer
2002-12-04 Sollentuna Energi: A Broadband Pioneer June 2002 Sollentuna Energi: A broadband pioneer Sollentuna Kommun provides an attractive environment for several thousands of residents as well as it
Korenix JetNet 3000 Series Industrial Entry-Level Ethernet Rail Switch User s Manual
Korenix JetNet 3000 Series Industrial Entry-Level Ethernet Rail Switch User s Manual Fourth Edition, DEC, 2007 www.korenix.com Korenix JetNet 3000 Series Industrial Entry-Level Ethernet Rail Switch User
FIBER OPTIC HARDWARE STEVE PAULOV
C H A P T E R 7 FIBER OPTIC HARDWARE STEVE PAULOV The main purpose for hardware is to protect and organize splice and termination points. Hardware can be divided into two categories; indoor and outdoor.
3 Chapter Introduction. 3.2 Copper Cable
3 Chapter 3 3.1 Introduction The Network Media is the device that physically carries the data from computer to computer. The three major types of network media are: Copper Cable Fiber-Optic Cable Wireless
Accelerating Light STAR. Data Center High Density Connectivity Solution
Accelerating Light STAR Data Center High Density Connectivity Solution STAR High Density Connectivity Solution STAR is a cost-effective modular solution that harnesses ultra-high density pre-terminated
NZQA unit standard version 3 Page 1 of 5. Demonstrate knowledge for telecommunications premises network cablers
Page 1 of 5 Title Demonstrate knowledge for telecommunications premises network cablers Level 2 Credits 2 Purpose This unit standard is for people installing and maintaining telecommunications cables on
Closet Connector Housings (CCH)
features and benefits Interconnect and crossconnect capability Removable, translucent top covers (1U, 2U, 3U), removable rear cover (4U) Internal and external strain-relief options Accepts panels, modules
Voice Cable & Gel Splices
Voice contents Voice Cable & Gel Splices CW1308 & CW1308B cable 152 CW1128 cable 152 Gel Splices 152 Line Jacks & Modules BT Line Jacks 153 Network Termination Point 153 ADSL Splitter 153 Voice modules
Ethernet 10Base-T Hub EH-500 EH-800A EH Rev. 3.0
Ethernet 10Base-T Hub EH-500 EH-800A EH-1600 Rev. 3.0 Trademarks Copyright PLANET Technology Corp. 1998. PLANET is a registered trademark of PLANET Technology Corp. The information in this manual is subject
800xA Networks. NE801 User Manual. Power and productivity for a better worldtm
800xA Networks NE801 User Manual Power and productivity for a better worldtm 800xA Networks NE801 User Manual NOTICE This document contains information about one or more ABB products and may include a
harting Smart Network Infrastructure Selection Guide
harting Smart Network Infrastructure Selection Guide Selection guide In just a few steps to a complete network With this selection guide you get an easy tool, which supports you in designing your Automation
Quick Start Guide. Gigabit Smart Switch Eco Fanless. Supports http and SNMP interfaces for switch management. LGB2118A LGB2124A
LGB2118A LGB2124A Gigabit Smart Switch Eco Fanless Quick Start Guide Supports http and SNMP interfaces for switch management. Customer Support Information Order toll-free in the U.S.: Call 877-877-BBOX
Traverse System Documentation. Installation and Commissioning Guide
Force10 Networks Inc. Traverse System Documentation Installation and Commissioning Guide Release TR3.2.2 Publication Date: April 2009 Document Number: 800-0002-TR322 Rev. A Copyright 2009 Force10 Networks,
Rack Mount Enclosures. Fibre Optic Rack Mount Enclosure: SLIDING. Features. Application. Technical Specifications. Asia Pacific EMEA Americas
Rack Mount Enclosures Fibre Optic Rack Mount Enclosure: SLIDING OCC s rack mountable sliding fibre optic enclosures support the use of both indoor and outdoor fibre cable types. Suitable for patching or
Peter Sharp RCDD IBI Group
Peter Sharp RCDD IBI Group Who am I? Presenter Credentials Electrical Engineering Consultant Specialties in communications, electronics and computer sciences, In practice for more than 40 years Member
SPOS (Station Point of Sale) 200. SFTP (Station Fare Transaction Processor) 35. CQD (Card Query Device) 35. HCR (Handheld Card Reader) Cradles 120
DESIGN GUIDELINES PRESTO INSTALLATION & CONNECTIVITY PAGE 1 of 4 ELECTRICAL CONNECTIVITY AND WIRING Communications Conduits Conduits designated for Presto equipment data wiring shall be clearly identified
OptiTect Indoor Local Convergence Cabinet, Gen III Series
Features and Benefits Industry-leading cabinet size Significant freight, storage and installation efficiencies Full factory-stubbed cabinets Enables quicker installation and rapid emergency restoration
Prisma II Platform. Optoelectronics
Optoelectronics Prisma II Platform Description In optical transmission systems, the network platform forms the foundation of the product family. The Prisma II platform provides network operators with the
10/100/1000T to Mini-GBIC Industrial Switch Converter 10/100/1000T to 1000SX/LX Industrial Switch Converter. AMG9011G-H (-40 to 75C) User Manual
10/100/1000T to Mini-GBIC Industrial Switch Converter 10/100/1000T to 1000SX/LX Industrial Switch Converter AMG9011G-H (-40 to 75C) User Manual www.amgsystems.com Content Overview...1 Introduction... 1
NZQA registered unit standard version 2 Page 1 of 7. Demonstrate basic knowledge of electronic security data protocols and cabling
Page 1 of 7 Title Demonstrate basic knowledge of electronic security data protocols and cabling Level 3 Credits 15 Purpose This unit standard is for electronic security installers engaged in the installation
MODEL: MDCAT. Lightning Surge Protectors for Electronics Equipment M-RESTER
Lightning Surge Protectors for Electronics Equipment M-RESTER LIHTNIN SURE PROTECTOR FOR ETHERNET (PoE / 10 BASE-T / 100 BASE-TX / 1000 BASE-T) Functions & Features Designed specifically for Ethernet network
Racks. RS3000 Rack. Features and Benefits. Prysmian Part Numbers: See below. Kit Contents. Additional Items Recommended. Prysmian Part Numbers
Racks RS3000 Rack Prysmian Part Numbers: See below The RS3000 Rack is a standard rack with 19 mounting rails, used to accommodate a range of SRS3000 shelves and sub-racks or any other 19 rack mounted products.
8 10/100/1000T Industrial Switch. User Manual MS655208(X)
8 10/100/1000T Industrial Switch User Manual MS655208(X) Content Overview... 1 Introduction... 1 Features... 3 Packing List... 4 Safety Precaution... 4 Hardware Description... 5 Front Panel... 5 Top View...
8-port 10/100TX + 2-Port 10/100/1000T/100/1000 SFP Combo with 8 PoE Injectors Industrial Ethernet Switch User Manual
8-port 10/100TX + 2-Port 10/100/1000T/100/1000 SFP Combo with 8 PoE Injectors Industrial Ethernet Switch User Manual FCC Warning This Equipment has been tested and found to comply with the limits for a
Tarleton State University. Specifications
Tarleton State University Campus Communication Infrastructure Specifications Cabling Standards Summary This document identifies Tarleton State University communication infrastructure standards. The communication
3M Fiber Distribution Units 8400 Series
Communication Markets Division 3M Fiber Distribution Units 400 Series Flexible options to meet growing needs in limited spaces 3M offers a full line of patch panel designs to simplify your cable management
Office of the Chief Information Officer Technical Note: IT-960-TN14 Effective: 05/25/2006 Last Revised: 02/17/2012 Issuing Office: OCIO
Cabling Standards Office of the Chief Information Officer Technical Note: IT-960-TN14 Effective: 05/25/2006 Last Revised: 02/17/2012 Issuing Office: OCIO 1. Purpose CABLING STANDARDS This technical note
RCC45 ➁ Overview / /
RCC45 ➁ Overview 010.2936 More future and modularity Integration of POF and power Guaranteed modularity Long-term investment protection Flexible cabling solution Fast and convenient installation 1 010.2721
Data Products & Accessories
Data Products & Accessories Data Products & Accessories... 83 All warranties are for 1 year only unless otherwise stated. All warranties are for 1 year only unless otherwise stated. 82 Cat 5e Patch Panel
Data Center Optical Distribution Frame Solutions
Data Center Optical Distribution Introduction... 260 Fiber Main Distribution Frame... 262 Fiber Termination Blocks (FTBs)... 265 Sliding Adapter Packs... 272 Data Center Splice Cabinet... 273 Accessories...
New product codes. 1. A 15-year product guarantee covering malfunctioning of all products as stand-alone units.
Established 25 years ago, Telesafe is a Norwegian manufacturer of structured cabling products which has served this particular market for more than 15 years, supplying customers with the best know-how
MODEL: MDCAT. Lightning Surge Protectors for Electronics Equipment M-RESTER
Lightning Surge Protectors for Electronics Equipment M-RESTER LIHTNIN SURE PROTECTOR FOR ETHERNET (PoE / 10 BASE-T / 100 BASE-TX / 1000 BASE-T) Functions & Features Designed specifically for Ethernet network
RJ point five CONNECTOR SYSTEM
RJ point five CONNECTOR SYSTEM Quick Reference Guide TE Connectivity s (TE) next-generation Ethernet link, the RJ point five connector, offers higher density cabling solutions for Original Equipment Manufacturers
Wall-Mountable Connector Housings (WCH)
Features and Benefits Interconnect and cross-connect capabilities Ideal for field splicing and connectorization Accepts CCH cassettes, panels and modules Variety of preterminated and field-installable
Passive network equipment. Catalog
Passive network equipment Catalog 2018 Table of Contents Cabinets, Open Rack, Server Chassis 4 Single section wall mount cabinets 6 Double section wall mount cabinets 8 Free standing cabinets FF01 series
OAsys. 24 Fibre Swing Out Splicing and Patching Shelf. Rack Mounted Products. Features and Benefits. Prysmian Part Numbers: See Table on page 3
Fibre Swing Out Splicing and Patching Shelf Prysmian Part Numbers: See Table on page 3 Picture shows shelf fitted with one FC panel and one SC panel The OAsys Fibre Swing Out Splicing and Patching Shelf
Contents. Structured Cabling Solutions. LAN Cables Patch Cords Connectors Patch Panels... 06
Contents Cat6 Structured Cabling Solutions U/UTP Cabling Solutions Structured Cabling Solutions LAN Cables... 03 Patch Cords... 04 Connectors... 05 Patch Panels... 06 U/FTP Cabling Solutions LAN Cables...
Ha-VIS mcon 3000 Next Generation Introduction and features
Ha-VIS Next Generation Introduction and features Ha-VIS Next Generation es, managed, for mounting onto top-hat mounting rail in control cabinets General Description Features The fully Managed es of the
Cisco Series Gigabit Ethernet Half-Height Line Card
Cisco 10000 Series Gigabit Ethernet Half-Height Line Card Figure 1. Cisco 10000 Series Gigabit Ethernet Half-Height Line Card In order to continue to meet customers increasing needs for modularity and
Fibre Enlosures and Splicing
Fibre Enlosures and Splicing Siemon s fibre enclosures provide feature-rich and easily implemented options for managing critical fibre connectivity. With versions supporting up to 88 fibre ports, Siemon
rfi.com.au FIBRE OPTIC ENCLOSURES AND ACCESSORIES
rfi.com.au FIBRE OPTIC ENCLOSURES AND ACCESSORIES Product Catalogue Oct 2018 Rack Mount Enclosures Rack Mount Enclosures: SLIDING OCC s rack mountable sliding fibre optic enclosures support the use of
UNIVERSITY OF CALICUT (Purchase Division)
No. 12831/PURCHASE-ASST-A1/2013/CU UNIVERSITY OF CALICUT (Purchase Division) Calicut University. P.O., Dated, 07.06.2013. TENDER NOTICE Sealed and competitive tenders are invited for the installation of
Compact Module. Enhanced Category 5 UTP Cabling System
Compact Module Suitable for Gigabit Ethernet applications Shallow design requires minimal back-box depth Interchangeable with other Euro modules and 1 4 blanks Industry standard IDCs Individually QA tested
FL MC 10/100BASE-T/FO-660
Extract from the online catalog FL MC 10/100BASE-T/FO-660 Order No.: 2708193 FO converter, for converting 10/100Base-T to polymer and HCS fiber, (660 nm), SCRJ FO connection (PROFINET standard), rail-mountable,