WIRELESS AP/ROUTER USER GUIDE

Transcription

1 WIRELESS /ROUTER USER GUIDE Wireless Access Point 00Mbps

2 Chapter : Installation Diagram. Soluion. Soluion Chapter : Single Device Configuration. Connection Diagram. FAT/FIT Model. Login.4 Configuration Chapter : Copyright Statement Chapter 4: Contact Us

3 Chapter Installation Diagram. Solution Internet POE POWER SUPPLY

4 . Solution Internet AC CORE GATEWAY CORE SWITCH POE SWITCH POE SWITCH Note: Solution (Single Device Setting): Get into the web setting page independently. Solution (Multiple Devices Setting): Do centralized management and local portal by AC core gateway. (POE power supply and other devices are not standard, please refer to the packing list. )

5 Chapter Single Device Configuration. Connection Diagram LAN RESET WAN POE Power Supply (Not Standard) Higher Level Note: Set the LAN port of the device to the computer.. FAT/FIT Model Deployment of Wireless LAN (WLAN) switches is increasing in enterprise networks. These devices, which can be standalone switches or integrated into a blade on an enterprise class switch, are useful for the management and control of WLAN access points. Each can be independently managed as a separate network entity on the network. The access point in such a network is often called a Fat. During the past few years, centralized architectures with ACs and s have gained popularity. Access controller is responsible for configuration, control, and management of several s, which provides network administrators with a structured and hierarchical mode of control for multiple s in the enterprise. The s of are all default as fit mode, if you need to use the alone without AC, you need to adjust the mode from a fit mode to a fat mode. Connect the LAN port to the POE interface of the POE adapter, and the WAN port is connected to the PC. Power on, wait for about 90 seconds, you can see the wifi signal of the device. Short press the reset button (about s), and wait for the device to start again. 4 Set the PC to Enter in the PC browser. P.S. Please press reset button for 5 seconds to restore them to fit mode if you need to use them with an access controller in your future wireless network.

6 . Login When you login at the first time, you need to set a password. The device language has Chinese and to be chosen, and you can set up the language by the top right corner icon. Language Settings 简体中文 Please enter password login.4 Configuration.4. When you get into the setting page, there are three working modes in the : PPPOE, Static IP and Dynamic IP. SWITCH LAN LAN MODEM Router

7 .4. Click mode and set up IP Address and Subnet Mask. The and should be within same network segment as upper network and can t be conflict with from upper network router. After setting, you can visit the device from the that you have set just now by connecting internet with WAN port of the device. Notes: ① In mode, the from the other devices connected to the will be allocated by the upper network router. ② According to the defaulted setting, there is no need to change. If you want to manage the device, just manually set in the computer. WiFi.4G Users Mode: You can set up wireless SSID, password and channel in advanced. After setting, other mobile devices can connect the device SSID to surf the internet. WiFi.4G SSID Users.4G wireless Password Enter or 8- Characters Advanced setting Bandwidth 0MHz Country China Channel auto

8 WiFi.4G Users.4G SSID Mode: Please ensure that WDS in the upper network is enabled. device can set up intranet segment, and then select the wireless SSID signal you need to bridge and input wireless password. The password is the same as your upper network router. 4 Wireless WiFi.4G Refresh Scan Results NO. BSSID SSID Channel 40:A5:EF:84:E6:4 unknown 40:A5:EF:84:DE:64 unknown 40:A5:EF:85:48: unknown 4 00:E0:4C:8:96:D 5 40:A5:EF:84:E6: unknown 6 40:A5:EF:84:DE:6 unknown 7 40:A5:EF:80:97:6 Operation

9 4 Wireless WiFi.4G Scan Bind.4GHz SSID Password scan Enter or 8- Characters ① Select DHCP and the device will automatically receive segment from the upper network. 4 Wireless WiFi.4G Static DHCP Gateway DNS ② Select Static and you need to manually input and ensure that the segment should be the same as the upper network. ( can not be conflict with the upper network device.) 4 Wireless WiFi.4G Static DHCP e.g: xxx.xxx.xxx.xxx e.g: xxx.xxx.xxx.xxx Gateway DNS e.g: e.g:

10 ③ Set up SSID and password for this device and click to finish. 4 Wireless WiFi.4G.4G Wireless SSID Password 4 Wireless WiFi.4G STA SSID.4G SSID Router Mode: There are three ways to surf the internet which are PPPOE, Static and DHCP. SWITCH LAN LAN MODEM Router

11 ① PPPOE: It needs to fill in the account number and password, which are provided by ISP. WiFi.4G PPPoE DHCP Static Max Length 6 characters User Max Length 6 characters Password 49 MTU Max Length 6 characters Service name WiFi.4G WiFi.4G.4G Wireless SSID Password advanced setting Bandwidth 0MHz Country China Channel auto WiFi.4G Router.4G SSID

12 ② Static: It needs to fill in, Subnet Mask, Gateway and DNS, which are provided by ISP. WiFi.4G PPPoE DHCP Static e.g: xxx.xxx.xxx.xxx e.g: xxx.xxx.xxx.xxx Gateway e.g: DNS e.g: WiFi.4G WiFi.4G.4G Wireless SSID Password advanced setting Bandwidth 0MHz Country China Channel auto WiFi.4G Router.4G SSID

13 ③ DHCP: It needs to be allocated IP by the upper network device then you can surf the internet. WiFi.4G PPPoE Gateway DNS DHCP Static WiFi.4G WiFi.4G.4G Wireless SSID Password advanced setting Bandwidth 0MHz Country China Channel auto WiFi.4G Router.4G SSID

14 Chapter Copyright Statement No part of this manual shall be copied, reproduced, transcribed or translated in any form or by any means without the prior written consent of. Product specifications and information mentioned in this manual are for reference. Any updated information shall not be announced. Copyright All Rights Reserved. All statements and information are not constitute any form of guarantee. FS trademark and FS logo belong to.

15 Chapter 4 Contact Us China North America Room 70, Yisibo Software Building, Xinhaiyi, No. Haitian Road, Yuehai Street, Nanshan, District, Shenzhen, China 80 SW 4th Street Bldg W7 Suite H, Renton, WA 98057, United States Tel: Tel: + (877) Hong Kong Germany 0 Tung Chun Commercial Centre, Shanghai Street , Kowloon, HongKong Building 7, NOVA Neufahrn Gewer bepark, Am Gfild7, 8575, Neufahrn bei Freising, Munich Tel: +(85) Tel: +49 (0) Addresses, phone number and fax number also have been listed at Please us at sales@fs.com or call us for assistance. All statements, technical information, and recommendations related to the products here are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. Please contact FS for more information.