Configure a Switch. LAN Switching and Wireless Chapter 2. Version Cisco Systems, Inc. All rights reserved.
|
|
|
- Domenic Parrish
- 6 years ago
- Views:
Transcription
1 Configure a Switch LAN Switching and Wireless Chapter 2 Version Cisco Systems, Inc. All rights reserved. Cisco Public 1
2 Objectives Summarize the operation of Ethernet as defined for 100/1000 Mbps LANs in the IEEE standard. Explain the functions that enable a switch to forward Ethernet frames in a LAN. Configure a switch for operation in a network designed to support voice, video, and data transmissions. Configure basic security on a switch that will operate in a network designed to support voice, video, and data transmissions Cisco Systems, Inc. All rights reserved. Cisco Public 2
3 Summarize the operation of Ethernet as defined for 100/1000 Mbps LANs in the IEEE standard Describe the key elements of Ethernet/802.3 networks 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 3
4 Summarize the operation of Ethernet as defined for 100/1000 Mbps LANs in the IEEE standard Describe the design considerations for Ethernet/802.3 networks 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 4
5 Summarize the operation of Ethernet as defined for 100/1000 Mbps LANs in the IEEE standard Describe the LAN design considerations to reduce network latency 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 5
6 Explain the Functions that Enable a Switch to Forward Ethernet Frames in a LAN Describe the switch forwarding methods 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 6
7 Explain the Functions that Enable a Switch to Forward Ethernet Frames in a LAN Explain symmetric and asymmetric Switching 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 7
8 Explain the Functions that Enable a Switch to Forward Ethernet Frames in a LAN Describe how memory buffering works 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 8
9 Explain the Functions that Enable a Switch to Forward Ethernet Frames in a LAN Compare Layer 2 with Layer 3 switching 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 9
10 Configure a Switch for Operation in a Network Describe the Cisco IOS commands used to navigate the command-line 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 10
11 Configure a Switch for Operation in a Network Describe the Cisco IOS help facilities 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 11
12 Configure a Switch for Operation in a Network Describe the Cisco IOS commands used to access the command history 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 12
13 Configure a Switch for Operation in a Network Describe the boot sequence of a Cisco switch 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 13
14 Configure a Switch for Operation in a Network Describe how to prepare the switch to be configured 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 14
15 Configure a Switch for Operation in a Network Describe how to perform a basic switch configuration 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 15
16 Configure a Switch for Operation in a Network Describe how to verify the Cisco IOS configuration using the Show command 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 16
17 Configure a Switch for Operation in a Network Describe how to manage the Cisco IOS configuration files 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 17
18 Configure Basic Security on a Switch Describe the Cisco IOS commands used to configure password options 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 18
19 Configure Basic Security on a Switch Describe the Cisco IOS commands used to configure a login banner 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 19
20 Configure Basic Security on a Switch Describe the how to configure Telnet and SSH on a switch 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 20
21 Configure Basic Security on a Switch Describe the key switch security attacks. The description should include, MAC address flooding, spoofing attacks, CDP attacks, and Telnet attacks 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 21
22 Configure Basic Security on a Switch Describe how network security tools are used to improve network security 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 22
23 Configure Basic Security on a Switch Describe why you need to secure ports on a switch 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 23
24 Configure Basic Security on a Switch Describe the Cisco IOS commands used to disable unused ports 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 24
25 Summary LAN Design Process that explains how a LAN is to be implemented Factors to consider in LAN design include Collision domains Broadcast domains Network latency LAN segmentation 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 25
26 Summary Switch forwarding methods Store & forward used by Cisco Catalyst switches Cut through 2 types Cut through Fast forwarding 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 26
27 Summary Symmetric switching Switching is conducted between ports that have the same bandwidth Asymmetric switching Switching is conducted between ports that have unlike bandwidth 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 27
28 Summary CISCO IOS CLI includes the following features Built in help Command history/options Switch security Password protection Use of SSH for remote access Port security 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 28
29 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 29
Chapter 2. Switch Concepts and Configuration. Part I
Chapter 2 Switch Concepts and Configuration Part I CCNA3-1 Chapter 2-1 Note for Instructors These presentations are the result of a collaboration among the instructors at St. Clair College in Windsor,
Switches Chapter 2 1
Switches Chapter 2 1 Topics Operation of 100/1000 Mbps Ethernet Switches and how they forward frames Configure a switch Basic security on a switch 2 Semester 3 LAN Design Basic Switch Concepts Wireless
Chapter 5: Ethernet. Introduction to Networks - R&S 6.0. Cisco Networking Academy. Mind Wide Open
Chapter 5: Ethernet Introduction to Networks - R&S 6.0 Cisco Networking Academy Mind Wide Open Chapter 5 - Sections 5.1 Ethernet Protocol Describe the Ethernet MAC address and frame fields 5.2 LAN Switches
Cisco CCNA (ICND1, ICND2) Bootcamp
Cisco CCNA (ICND1, ICND2) Bootcamp Course Duration: 5 Days Course Overview This five-day course covers the essential topics of ICND1 and ICND2 in an intensive Bootcamp format. It teaches students the skills
CCNA. Course Catalog
CCNA Course Catalog 2012-2013 This course is intended for the following audience: Network Administrator Network Engineer Systems Engineer CCNA Exam Candidates Cisco Certified Network Associate (CCNA 640-802)
Interconnecting Cisco Networking Devices Part 1 ( )
Interconnecting Cisco Networking Devices Part 1 (100-101) Exam Description: The 100-101 Interconnecting Cisco Networking Devices Part 1 (ICND1) is a 1.5- hour exam with 50 60 questions. The 100-101 Interconnecting
Switched Ethernet Virtual LANs
Switched Ethernet Virtual LANs Computer Networks Lecture 4 http://goo.gl/pze5o8 Switched Ethernet 2 LAN Switches Behave as bridges (operates in the logical tree topology) Switching is implemented by hardware
Introducing Campus Networks
Cisco Enterprise Architecture Introducing Campus Networks 2003, Cisco Systems, Inc. All rights reserved. 2-1 2003, Cisco Systems, Inc. All rights reserved. BCMSN v2.0 2-2 Campus Data Center Combines switching
Cisco Networking Academy Curriculum - Semester Three Scope and Sequence
Cisco Networking Academy Curriculum - Semester Three Scope and Sequence Course Description: This is the third course in four courses designed to introduce new content and extend previously learned networking
Introduction p. 1 Self-Assessment p. 9 Networking Fundamentals p. 17 Introduction p. 18 Components and Terms p. 18 Topologies p. 18 LAN Technologies
Introduction p. 1 Self-Assessment p. 9 Networking Fundamentals p. 17 Introduction p. 18 Components and Terms p. 18 Topologies p. 18 LAN Technologies p. 19 Ethernet p. 19 WAN Technologies p. 21 Dedicated
Overview. About the Catalyst 2820 and Catalyst 1900 Switches CHAPTER
CHAPTER 1 Overview This chapter describes the Enterprise Edition software features for Catalyst 2820 and Catalyst 1900 switches. It also describes the feature default settings and shows the management
1. Which two statements are true about VLAN implementation? (Choose two.)
CCNA 2 Chapter 3 v5.0 Exam Answers 2015 (100%) 1. Which two statements are true about VLAN implementation? (Choose two.) The size of the collision domain is reduced. The number of required switches in
Bridging and Switching Basics
CHAPTER 4 Bridging and Switching Basics This chapter introduces the technologies employed in devices loosely referred to as bridges and switches. Topics summarized here include general link-layer device
C H A P T E R Overview Cisco Aironet 1400 Series Wireless Bridges Software Configuration Guide OL
CHAPTER 1 Cisco Aironet 1400 Series s (hereafter called bridges) provide building-to-building wireless connectivity. Operating in the 5.8-GHz, UNII-3 band and conforming to the 802.11a standard, the 1400
Interconnecting Cisco Networking Devices Part 1 (ICND1) Course Overview
Interconnecting Cisco Networking Devices Part 1 (ICND1) Course Overview This course will teach students about building a simple network, establishing internet connectivity, managing network device security,
Objective: Select the appropriate media, cables, ports, and connectors to connect switches to other network devices and hosts
Curriculum Name CCENT Study Guide 2 Section 9.2 Troubleshooting Layer 1 and Layer 2 Issues As you work through this troubleshooting section, you can review the material necessary to prepare you to obtain
Chapter 2. Switch Concepts and Configuration. Part II
Chapter 2 Switch Concepts and Configuration Part II CCNA3-1 Chapter 2-2 Switch Concepts and Configuration Configuring Switch Security MAC Address Flooding Passwords Spoofing Attacks Console Security Tools
VLANs Level 3 Unit 9 Computer Networks
VLANs Some Requirements of LANs Need to split up broadcast domains to make good use of bandwidth People in different departments may need to be grouped together for access to servers Security: restrict
CHAPTER 1: VLANS. Routing & Switching
CHAPTER 1: VLANS Routing & Switching CHAPTER 1 1.1 VLAN Segmentation 1.2 VLAN Implementation 1.3 VLAN Security and Design 1.4 Summary CHAPTER 1 : OBJECTIVES Explain the purpose of VLANs in a switched network.
CCNA 1 Chapter 2 v5.0 Exam Answers %
CCNA 1 Chapter 2 v5.0 Exam Answers 2015 100% 1. Which two features are characteristics of flash memory? (Choose two.) Flash provides nonvolatile storage. Flash receives a copy of the IOS from RAM when
Preview Test: cis191_chap1_quiz
3/9/2015 Preview Test: cis191_chap1_quiz 20155229528. Sunyata 98 Courses Organizations Need Help? Prevent Sexual Violence Preview Test: cis191_chap1_quiz Test Information Description Instructions Timed
VLANs. LAN Switching and Wireless Chapter 3. Version Cisco Systems, Inc. All rights reserved. Cisco Public 1
VLANs LAN Switching and Wireless Chapter 3 Version 4.0 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 1 Objectives Explain the role of VLANs in a converged network. Explain the role of trunking
Client QoS Association Settings on the WAP371
Article ID: 5091 Client QoS Association Settings on the WAP371 Objective Client Quality of Service (QoS) Association is used to control the wireless clients connected to the network, and allows you to
COPYRIGHTED MATERIAL. Table of Contents. Assessment Test
10089.book Page xi Monday, July 23, 2007 3:17 PM Introduction Assessment Test xxiii xxxiii Chapter 1 Internetworking 1 Internetworking Basics 4 Internetworking Models 11 The Layered Approach 12 Advantages
Chapter 5 Reading Organizer After completion of this chapter, you should be able to:
Chapter 5 Reading Organizer After completion of this chapter, you should be able to: Describe the operation of the Ethernet sublayers. Identify the major fields of the Ethernet frame. Describe the purpose
CCNA Exploration Network Fundamentals
CCNA Exploration 4.0 1. Network Fundamentals The goal of this course is to introduce you to fundamental networking concepts and technologies. These online course materials will assist you in developing
Hubs. twisted pair. hub. 5: DataLink Layer 5-1
Hubs Hubs are essentially physical-layer repeaters: bits coming from one link go out all other links at the same rate no frame buffering no CSMA/CD at : adapters detect collisions provides net management
CCNA 1 Chapter 2 v5.0 Exam Answers 2013
CCNA 1 Chapter 2 v5.0 Exam Answers 2013 1. Refer to the exhibit. A switch was configured as shown. A ping to the default gateway was issued, but the ping was not successful. Other switches in the same
Exam E1 Copyright 2010 Thaar AL_Taiey
Exam E1 2 Exam E1 E1-1. Which of the following statements is true regarding the internetwork shown in Figure E1-1? (Select all that apply) Figure E1-1 A Sample Internetwork A. The link number 15 uses a
Contents. Table of Contents
Table of Contents Contents 1. Web Interface Configuration... 2 1.1 Login Information... 3 1.2 Saving Configuration Changes... 4 1.3 Status Page... 5 1.4 Log... 6 1.4.1 Log Settings... 6 1.4.2 Syslog...
Chapter 6 Connecting Device
Computer Networks Al-Mustansiryah University Elec. Eng. Department College of Engineering Fourth Year Class Chapter 6 Connecting Device 6.1 Functions of network devices Separating (connecting) networks
Configure Smartport Properties on a Switch through the CLI
Configure Smartport Properties on a Switch through the CLI Objective This article provides instructions on how to configure auto smartport properties on your switch through the CLI. To configure smartports
A. ARPANET was an early packet switched network initially connecting 4 sites (Stanford, UC Santa Barbara, UCLA, and U of Utah).
Volume: 245 Questions Question No: 1 Which of the following statements best describes ARPANET? A. ARPANET was an early packet switched network initially connecting 4 sites (Stanford, UC Santa Barbara,
VLAN Configuration via CLI on 300/500 Series Managed Switches
Article ID: 4986 4986 - VLAN Configuration via CLI on 300/500 Series Managed Switches Objective VLANs allow you to logically segment a LAN into different broadcast domains. In scenarios where sensitive
Introduction to Switched Networks Routing And Switching
Introduction to Switched Networks Routing And Switching 1 Converged Networks Growing Complexity of Networks Our digital world is changing Information must be accessed from anywhere in the world Networks
Catalyst 1900 Series and Catalyst 2820 Series Enterprise Edition Software Configuration Guide
INDEX A allowed list, VLAN 2-28 to 2-29 ATM 2-5 firmware upgrade B-5 to B-7 LANE trunk connections 1-4 module 2-9, 2-13, 2-23 networks 2-5 trunk 2-4, 2-14 B bridge groups 3-15 bridge number 2-10 Bridge
exam. Number: Passing Score: 800 Time Limit: 120 min CISCO Interconnecting Cisco Networking Devices Part 1 (ICND)
100-105.exam Number: 100-105 Passing Score: 800 Time Limit: 120 min CISCO 100-105 Interconnecting Cisco Networking Devices Part 1 (ICND) Exam A QUESTION 1 Which route source code represents the routing
Advanced Network Administration. 1. Course Description Enabling Communication across Networks Secured Communication using Network Devices
Advanced Network Administration 1. Course Description Enabling Communication across Networks Secured Communication using Network Devices 2. Duration 5 Days 3. Purpose This five day course for L-2 Network
Configuring Port-Based Traffic Control
Overview of Port-Based Traffic Control, page 1 Finding Feature Information, page 2 Information About Storm Control, page 2 How to Configure Storm Control, page 4 Information About Protected Ports, page
Semester 1. Cisco I. Introduction to Networks JEOPADY. Chapter 11
Semester 1 Cisco I Introduction to Networks JEOPADY Chapter 11 Network Router Design Modes WAN WAN Router Router Safety Performance Commands ISR Potpourri Encapsulation Services Basics Commands F i n a
Example: Configuring DHCP Snooping, DAI, and MAC Limiting on an EX Series Switch with Access to a DHCP Server Through a Second Switch
Example: Configuring DHCP Snooping, DAI, and MAC Limiting on an EX Series Switch with Access to a DHCP Server Through a Second Switch Requirements You can configure DHCP snooping, dynamic ARP inspection
Contents. Table of Contents
Table of Contents Contents 1. Web Interface Configuration... 2 1.1 Login Information... 2 1.2 Saving Configuration Changes... 3 1.3 Status Page... 4 1.4 Log... 4 1.4.1 Log Settings... 4 1.5 System... 5
Exam : Cisco Certified Network Associate(CCNA) Title : Version : DEMO
Exam : 640-802 Title : Cisco Certified Network Associate(CCNA) Version : DEMO 1.Refer to the exhibit. What could be possible causes for the "Serial0/0 is down" interface status? (Choose two.) A. A Layer
CCNA 1 v5.0 R&S ITN Final Exam 2014
CCNA 1 v5.0 R&S ITN Final Exam 2014 1 Refer to the exhibit. The network administrator enters these commands into the R1 router: R1# copy running-config tftp Address or name of remote host [ ]? When the
More on LANs. Roadmap. CPSC Network Programming. ! Hardware Addressing. !LAN Wiring. ! Extending LANs. ! Local Loop Digital Technologies
CPSC 360 - Network Programming More on LANs Michele Weigle Department of Computer Science Clemson University mweigle@cs.clemson.edu February 28, 2005 http://www.cs.clemson.edu/~mweigle/courses/cpsc360
Actual4Test. Actual4test - actual test exam dumps-pass for IT exams
Actual4Test http://www.actual4test.com Actual4test - actual test exam dumps-pass for IT exams Exam : 100-101 Title : CCNA Interconnecting Cisco Networking Devices 1 (ICND1) Vendor : Cisco Version : DEMO
Chapter 3: VLANs. Routing & Switching
Chapter 3: VLANs Routing & Switching VLAN Definitions A VLAN is a logical partition of a Layer 2 network. VLANs logically group hosts, regardless of physical location. Multiple partitions can be created,
Configuring Ethernet Management Ports
Finding Feature Information, on page 1 Prerequisites for Ethernet Management Ports, on page 1 Information about the Ethernet Management Port, on page 1 How to Configure the Ethernet Management Port, on
Send document comments to
CHAPTER 8 This chapter describes how to configure Telnet and includes the following topics: Information About the Telnet Server, page 8-1 Prerequisites for Telnet, page 8-1 Guidelines and Limitations,
Overview of the ML-Series Card
CHAPTER 1 This chapter provides an overview of the ML-100T-8 card for Cisco ONS 15310-CL and the Cisco ONS 15310-MA. It lists Ethernet and SONET capabilities and Cisco IOS and Cisco Transport Controller
Configuring Ethernet Management Ports
Finding Feature Information, page 1 Prerequisites for Ethernet Management Ports, page 1 Information about the Ethernet Management Port, page 1 How to Configure the Ethernet Management Port, page 4 TFTP
Chapter 11: It s a Network. Introduction to Networking
Chapter 11: It s a Network Introduction to Networking Small Network Topologies Typical Small Network Topology IT Essentials v5.0 2 Device Selection for a Small Network Factors to be considered when selecting
Configuring and Monitoring from the Switch Manager
CHAPTER 3 Configuring and Monitoring from the Switch Manager This chapter explains how to use the switch manager to change the configuration settings and to monitor the switch. This chapter assumes that
Mobile MOUSe ROUTING AND SWITCHING FUNDAMENTALS ONLINE COURSE OUTLINE
Mobile MOUSe ROUTING AND SWITCHING FUNDAMENTALS ONLINE COURSE OUTLINE COURSE TITLE ROUTING AND SWITCHING FUNDAMENTALS COURSE DURATION 16 Hour(s) of Self-Paced Interactive Training COURSE OVERVIEW In the
CCENT ICND Pearson ucertify. Course Outline. CCENT ICND Pearson ucertify. 26 Mar
Course Outline CCENT ICND1 100-105 Pearson ucertify 26 Mar 2019 Contents 1. Course Objective 2. Pre-Assessment 3. Exercises, Quizzes, Flashcards & Glossary Number of Questions 4. Expert Instructor-Led
Building Cisco Multilayer Switched Networks (BCMSN)
Building Cisco Multilayer Switched Networks (BCMSN) Table of Contents Module 1 Defining VLANs Implementing Best Practices for VLAN Topologies Describing Issues in a Poorly Designed Network Grouping Business
LAN design. Chapter 1
LAN design Chapter 1 1 Topics Networks and business needs The 3-level hierarchical network design model Including voice and video over IP in the design Devices at each layer of the hierarchy Cisco switches
Computer Networking. December 2004 CEN CN
Computer Networking CEN CN 1 Layer 2 - Bridge Frame Header Data Bridge Trailer Data Link Layer Physical Layer More complex than repeat, it requires hardware and software Bridges have diminished because
CCNA Routing & Switching
CCNA Routing & Switching 1.0 LAN Switching Technologies 1. VLANs,Trunk, DTP 2. VLANs, Trunks and DTP Configuration 3. Voice Vlan Configuration 4. VTP 5. VTP - Configuration 6. Spanning-tree 7. STP - PVST+
Console Port, Telnet, and SSH Handling
Console Port Overview, on page 1 Connecting Console Cables, on page 1 Installing USB Device Drivers, on page 1 Console Port Handling Overview, on page 2 Telnet and SSH Overview, on page 2 Persistent Telnet,
Interconnecting Cisco Networking Devices Part 1 ICND1
Interconnecting Cisco Networking Devices Part 1 ICND1 Course Length: 5 days Course Delivery: Traditional Classroom Online Live Course Overview Interconnecting Cisco Networking Devices, Part 1 (ICND1) v3.0
CCNA Exam File with Answers. Note: Underlines options are correct answers.
CCNA Exam File with Answers. Note: Underlines options are correct answers. 1. Which of the following are ways to provide login access to a router? (choose all that apply) A. HTTP B. Aux Port /TELNET C.
Top-Down Network Design
Top-Down Network Design Chapter Two Analyzing Technical Goals and Tradeoffs Original slides by Cisco Press & Priscilla Oppenheimer Scalability Availability Performance Accuracy Security Manageability Usability
SEMESTER 2 Chapter 1 Planning and Cabling a Network V 4.0
SEMESTER 2 Chapter 1 Planning and Cabling a Network V 4.0 135 points 1.1.1 What are the common components between a router and other computers? CPU RAM ROM Operating System 1.1.1.2 What does a router connect?
TestOut Routing and Switching Pro - English 6.0.x COURSE OUTLINE. Modified
TestOut Routing and Switching Pro - English 6.0.x COURSE OUTLINE Modified 2017-07-10 TestOut Routing and Switching Pro Outline- English 6.0.x Videos: 133 (15:42:34) Demonstrations: 78 (7:22:19) Simulations:
Configuring Layer 2 Switching
Configuring Layer 2 Switching This chapter describes how to configure Layer 2 switching using Cisco NX-OS. This chapter includes the following sections: Information About Layer 2 Switching, page 1 Licensing
CCNA Layer 2 switching. Revision no.: PPT/2K605/03
CCNA 640-801 Layer 2 switching Revision no.: PPT/2K605/03 What is Switching? It breaks the Collision Domain It takes the packet and forwards to destined port without any modification. Network still remains
Examsheets Questions and Answers
640-802 Examsheets Questions and Answers Number: 640-802 Passing Score: 800 Time Limit: 120 min File Version: 17.6 http://www.gratisexam.com/ 640-802 Questions and Answers Exam Name: Cisco Cisco Certified
Configuring Port-Based Traffic Control
Overview of Port-Based Traffic Control, page 2 Finding Feature Information, page 2 Information About Storm Control, page 2 How to Configure Storm Control, page 4 Finding Feature Information, page 9 Information
Getting Started with the VG248
CHAPTER 2 Before you can configure the telephony features on the VG248 to interact with the analog phones, you must first configure the basic network, SNMP, and password settings. These settings enable
Configuring Secure Shell (SSH)
Prerequisites for Configuring Secure Shell, page 1 Restrictions for Configuring Secure Shell, page 2 Information About Configuring Secure Shell, page 2 How to Configure Secure Shell, page 4 Monitoring
CISCO EXAM QUESTIONS & ANSWERS
CISCO 100-101 EXAM QUESTIONS & ANSWERS Number: 100-101 Passing Score: 800 Time Limit: 120 min File Version: 35.5 http://www.gratisexam.com/ CISCO 100-101 EXAM QUESTIONS & ANSWERS Exam Name: CCNA Interconnecting
CCNA 2014 Performance Based Lab. Course Outline. CCNA 2014 Performance Based Lab Sep 2018
Course Outline CCNA 2014 Performance Based Lab 08 Sep 2018 Contents 1. Course Objective 2. Expert Instructor-Led Training 3. ADA Compliant & JAWS Compatible Platform 4. State of the Art Educator Tools
Chapter 9. Ethernet. Part II
Chapter 9 Ethernet Part II CCNA1-1 Chapter 9-2 Note for Instructors These presentations are the result of a collaboration among the instructors at St. Clair College in Windsor, Ontario. Thanks must go
Using Cisco IOS XE Software
This chapter describes the basics of using the Cisco IOS XE software and includes the following section: Accessing the CLI Using a Router Console, on page 1 Accessing the CLI Using a Router Console Before
CCNA 1 Chapter 5 v5.0 Exam Answers 2013
CCNA 1 Chapter 5 v5.0 Exam Answers 2013 1 2 A host is trying to send a packet to a device on a remote LAN segment, but there are currently no mappings in its ARP cache. How will the device obtain a destination
Lab Using the CLI to Gather Network Device Information Topology
Topology Addressing Table Objectives Device Interface IP Address Subnet Mask Default Gateway R1 G0/1 192.168.1.1 255.255.255.0 N/A Lo0 209.165.200.225 255.255.255.224 N/A S1 VLAN 1 192.168.1.11 255.255.255.0
Numerics INDEX. 2.4-GHz WMIC, contrasted with 4.9-GHz WMIC g 3-6, x authentication 4-13
INDEX Numerics 2.4-GHz WMIC, contrasted with 4.9-GHz WMIC 1-8 802.11g 3-6, 3-9 802.1x authentication 4-13 A AAA server group 4-25 aaa authentication login command 4-24 aaa authorization command 4-27 aaa
PrepAwayExam. High-efficient Exam Materials are the best high pass-rate Exam Dumps
PrepAwayExam http://www.prepawayexam.com/ High-efficient Exam Materials are the best high pass-rate Exam Dumps Exam : 642-618 Title : Deploying Cisco ASA Firewall Solutions (FIREWALL v2.0) Vendors : Cisco
Configuration Example: TACACS Administrator Access to Converged Access Wireless LAN Controllers
Configuration Example: TACACS Administrator Access to Converged Access Wireless LAN Controllers This document provides a configuration example for Terminal Access Controller Access Control System Plus
2. What is a characteristic of a contention-based access method?
CCNA 1 Chapter 5 v5.0 Exam Answers 2015 (100%) 1. Which statement is true about MAC addresses? MAC addresses are implemented by software. A NIC only needs a MAC address if connected to a WAN. The first
Overview. Switch Features CHAPTER
CHAPTER 1 Overview The 2900 XL series switches are workgroup Ethernet switches that supply autosensing 10BaseT or 100BaseT connections on all ports. Expansion slots on Catalyst 2912MF XL and 2924M XL switches
Lab Configuring Switch Security Features Topology
Topology Addressing Table Objectives Device Interface IP Address Subnet Mask Default Gateway R1 G0/1 172.16.99.1 255.255.255.0 N/A S1 VLAN 99 172.16.99.11 255.255.255.0 172.16.99.1 PC-A NIC 172.16.99.3
Smart Install Concepts
CHAPTER 1 Smart Install is a plug-and-play configuration and image-management feature that provides zero-touch deployment for new switches. This means that a customer can ship a switch to a location, place
Course Outline. CCENT ICND Pearson ucertify Network Simulator V4.4.
Course Outline CCENT ICND1 100-105 Pearson ucertify Network 20 Apr 2018 Contents 1. Course Objective 2. Expert Instructor-Led Training 3. ADA Compliant & JAWS Compatible Platform 4. State of the Art Educator
Course Outline. CCENT ICND Pearson ucertify Network Simulator. CCENT ICND Pearson ucertify Network Simulator
Course Outline CCENT ICND1 100-105 Pearson ucertify Network 28 Feb 2019 Contents 1. Course Objective 2. Expert Instructor-Led Training 3. ADA Compliant & JAWS Compatible Platform 4. State of the Art Educator
Configure Global Link Layer Discovery Protocol (LLDP) Settings on a Switch through the Command Line Interface (CLI)
Configure Global Link Layer Discovery Protocol (LLDP) Settings on a Switch through the Command Line Interface (CLI) Objective Link Layer Discovery Protocol (LLDP) Media Endpoint Discovery (MED) provides
Ethernet. Network Fundamentals Chapter Cisco Systems, Inc. All rights reserved. Cisco Public 1
Ethernet Network Fundamentals Chapter 9 1 Objectives Identify the basic characteristics of network media used in Ethernet. Describe the physical and data link features of Ethernet. Describe the function
VLANs. CCNA Exploration Semester 3 Chapter Sep-13
VLANs CCNA Exploration Semester 3 Chapter 3 1 Topics The role of VLANs in a network Trunking VLANs Configure VLANs on switches Troubleshoot common VLAN problems 2 Semester 3 LAN Design Basic Switch Concepts
Semester 3 Switch CLI labs Basic switch management S1 (DTE) net net net net
Lab 2.3.10.2cli Switch port options Semester 3 Switch CLI labs 192.5.5.0 net C 201.100.11.0 net B 199.6.13.0 net 204.204.7.0 ne t D E A 205.7.5.0 net 223.8.151.0 net 210.93. 105.0 net 219.17.100.0 net
Lab 1-2Connecting to a Cisco Router or Switch via Console. Lab 1-6Basic Graphic Network Simulator v3 Configuration
MODULE1 GETTING STARTED WITH YOUR CISCO LAB Lab 1-1Identifying Router Components and Accessories Lab 1-2Connecting to a Cisco Router or Switch via Console Lab 1-3Identifying Router & Switch IOS Software
Managing Your Switches
CHAPTER 3 Managing Your Switches You can use the IOS Release 12.0(5)XP software to manage a single switch, a stack of switches that are managed individually, or a cluster of switches that is managed through
CertifyMe. CertifyMe
CertifyMe Number: 642-176 Passing Score: 800 Time Limit: 120 min File Version: 8.8 http://www.gratisexam.com/ CertifyMe 642-176 Exam A QUESTION 1 Refer to the exhibit. What are the two options available
Full file at
Guide to Networking Essentials, Sixth Edition 2-1 Chapter 2 Network Hardware Essentials At a Glance Instructor s Manual Table of Contents Overview Objectives Tips Quick Quizzes Class Discussion Topics
PrepKing. PrepKing
PrepKing Number: 642-176 Passing Score: 800 Time Limit: 120 min File Version: 9.8 http://www.gratisexam.com/ PrepKing 642-176 Exam A QUESTION 1 Refer to the exhibit. What are the two options available
Virtual University of Pakistan. Describe the Hidden Node and Exposed Node problems in Standard? VUSR. [Larry L. Peterson]
![Virtual University of Pakistan. Describe the Hidden Node and Exposed Node problems in Standard? VUSR. [Larry L. Peterson]](/thumbs/89/99447056.jpg "Virtual University of Pakistan. Describe the Hidden Node and Exposed Node problems in Standard? VUSR. [Larry L. Peterson]")
www..net Solution Assignment No. 2 Question No. 1 Describe the Hidden Node and Exposed Node problems in 802.11 Standard? Hidden Node Problem: Consider the figure below. [Larry L. Peterson] B can exchange
CCM 4300 Lecture 5 Computer Networks, Wireless and Mobile Communications. Dr Shahedur Rahman. Room: T115
CCM 4300 Lecture 5 Computer Networks, Wireless and Mobile Communications Dr Shahedur Rahman s.rahman@mdx.ac.uk Room: T115 1 Recap of Last Session Described the physical layer Analogue and Digital signal
Course Outline. Pearson CISCO: CCENT/CCNA (ICND ) official cert guide.
Course Outline Pearson CISCO: CCENT/CCNA (ICND1 100-105) official 13 May 2018 Contents 1. Course Objective 2. Pre-Assessment 3. Exercises, Quizzes, Flashcards & Glossary Number of Questions 4. Expert Instructor-Led
How to Configure Cisco UC500 Series (Basic Configuration)
How to Configure Cisco UC500 Series (Basic Configuration) Cisco Unified Communication Manager 500 Series can be configured using Cisco Configuration Assistance which comes in CD with UC500 or can be downloaded
INTERNETWORKING NYS CLOTHING REQUIREMENT
INTERNETWORKING NYS PURPOSE To evaluate each contestant s preparation for employment and to recognize outstanding students for excellence and professionalism in the field of intering. CLOTHING REQUIREMENT