Cisco TelePresence, Deploying and provisioning video endpoints

Transcription

1 1

2 Cisco TelePresence, Deploying and provisioning video endpoints Session ID -

3 Abstract Over the course of the last years we have observed that many of our enterprise customer video deployments are becoming more pervasive. The requirement for being able to more easily deploy, provision and manage a larger number of TelePresence endpoints is more important than ever. This 90 minute session is aimed at video architects and administrators who will learn more about deploying large number of video endpoints. During the session we will offer a technical overview of how TelePresence endpoints are deployed on an enterprise network. We will also provide you with the latest knowledge on how to provision and manage TelePresence endpoints on CUCM and on VCS/TMS. Different solution on how to manage your TelePresence endpoints are also covered in this session. 3

4 Agenda Deploying TelePresence endpoints on an enterprise network Provision TelePresence endpoints on CUCM Provision TelePresence endpoints on VCS/TMS Manage your TelePresence endpoints

5 Introduction TelePresence Architecture Overview Campus Call Control Conferencing Scheduling And Management Monitoring Recording and Streaming Endpoints External Connections Branch Endpoints Conferencing WAN Global B2B Inter- Network Internet Mobile Office 5

6 Introduction TelePresence Architecture Overview Campus Call Control Conferencing Scheduling And Management Monitoring Recording and Streaming Endpoints External Connections Branch Endpoints Conferencing WAN Global B2B Inter- Network Internet Mobile Office 6

7 Cisco Live TelePresence Sessions Schedule Session ID Title Time BRKEVT-2805 BRKEVT-2800 BRKEVT-2801 BRKEVT-2807 BRKEVT-2809 BRKEVT-2806 Introduction to the internals of EX-Series Personal TelePresence systems and C-series codecs Overview of Cisco TelePresence Solution and Deployments Cisco TelePresence: best practices for call control integration Enterprise Video Network Performance Analysis with Medianet Cisco TelePresence Conductor Simple, Natural conferencing Troubleshooting Network Impairments in Enterprise TelePresence Deployments Monday Monday Monday Tuesday Tuesday Wednesday BRKEVT-2319 Business to Business Video Wednesday BRKEVT-2808 Developing Integrations with Cisco Video Solutions Thursday

8 Agenda Deploying TelePresence endpoints on an enterprise network Provision TelePresence endpoints on CUCM Provision TelePresence endpoints on VCS/TMS Manage your TelePresence endpoints

9 Deploying TelePresence Endpoints Different Call Control Models CUCM based call control VCS based call control CUCM and VCS integrated call control 9

10 Deploying TelePresence Endpoints Unified Call Control Roadmap Video Applications Unified Call Control Expressway Firewall Traversal B2B and Remote Worker Advanced Enterprise Conferencing Services Distributed Conferencing Services SIP grooming IP PBX Trunking (video) 3rd Party/H.323 Video Endpoints 10

11 Deploying TelePresence Endpoints CUCM Based Call Control CTS/TX TS MCU CTS/TX E20 System SW version CUCM E20 TE (1) EX, C series TC5 8.6(1) EX/SX/MX-Series CTMS MX, SX TC5 8.6(2) TX9x00 CTS (1) C-Series TX CTS (5) TX CTS (2) MCU (1) SIP H.323 TelePresence Server (1) 11

12 Deploying TelePresence Endpoints VCS Based Call Control VCS Control VCS Expressway Internet MCU MXP TS E20 Jabber Video E20 EX/SX/MX-Series Jabber Video MXP EX/SX/MX-Series C-Series SIP H

13 Deploying TelePresence Endpoints CUCM and VCS Integrated Call Control Customer now have choices where they can deploy endpoints UC endpoints UC Manager VCS Control VCS Expressway CTS/TX Internet E20 E20 Jabber Video E20 EX/SX/MX-Series Jabber Video EX/SX/MX-Series SIP H.323 C-Series EX/SX/MX-Series TelePresence and UC endpoints on the same UCM cluster E20, EX, MX, SX and C-Series endpoints can now be deployed natively on UC Manager Any-to-any native interoperability between all endpoints UCM-VCS SIP Trunking enhancements for maximum interoperability C-Series 13

14 Quality of Service The Basics Classification: Mark the packets with a specific priority denoting a requirement for class of service from the network Trust Boundary: Define and enforce a trust boundary at the network edge Scheduling: Assign packets to one of multiple queues (based on classification) for expedited treatment through the network Provisioning: Consider required bandwidth for all applications Resource Control: Enforce provisioned limits and policies to protect quality for all media streams PSTN IP WAN Campus Branch Office 14

15 Quality of Service Cisco Medianet DiffServ QoS Recommendations (RFC 4594-Based) Application Per-Hop Admission Queuing & Application Class Behavior Control Dropping Examples VoIP Telephony EF Required Priority Queue (PQ) Cisco IP Phones (G.711, G.729) Broadcast Video CS5 Required (Optional) PQ Cisco IP Video Surveillance / Cisco Enterprise TV Realtime Interactive CS4 Required (Optional) PQ Cisco TelePresence Multimedia Conferencing AF4 Required BW Queue + DSCP WRED CUPC, 9971, E20 Multimedia Streaming AF3 Recommended BW Queue + DSCP WRED Cisco Digital Media System (VoDs) Network Control CS6 BW Queue EIGRP, OSPF, BGP, HSRP, IKE Call-Signaling CS3 BW Queue SCCP, SIP, H.323 Ops / Admin / Mgmt. (OAM) CS2 BW Queue SNMP, SSH, Syslog Transactional Data AF2 BW Queue + DSCP WRED ERP Apps, CRM Apps, Database Apps Bulk Data AF1 BW Queue + DSCP WRED , FTP, Backup Apps, Content Distribution Best Effort DF Default Queue + RED Default Class Scavenger CS1 Min BW Queue (Deferential) YouTube, itunes, BitTorent, Xbox Live 15

16 Quality of Service DiffServ Classification on Cisco Telepresence Endpoints Endpoints on UCM get their QoS values from the SEP[MAC_addr].cnf.xml config file they download from UCM. The endpoints then parse that XML and update their QoS parameters appropriately. For systems provisioned by VCS/TMS the QoS parameters are included in the provisioning XML message they get back from the VCS. You can check QoS setting on the system s web interface. 16

17 Trust Boundary Quality of Service Establishing Trust Boundaries Access-Edge Switches Conditionally Trusted Endpoints Examples: Cisco IP Phones + PC, Telepresence Endpoints (CTS/C/EX/MX/SX) Trusted Endpoints Example: Software-protected PC with centrally-administered QoS markings Untrusted Endpoints Example: user PC 17

18 Quality of Service Conditional Trust Operation Example: EX-Series Telepresence Endpoint (TC5 release) Trust Boundary Successful Condition Met (i.e. CDP negotiation successful) Trust is Dynamically Extended to Telepresence Endpoint 1 2 PC Traffic: CoS 0 & DSCP 0 (Tagged packets are blocked) 3 TelePresence Endpoint: Voice + Video CoS 4 & DSCP CS4 Call-Signaling CoS 3 & DSCP CS3 4 CoS-to-DSCP Map: CoS 4 DSCP CS4 (32) CoS 3 DSCP CS3 (24) CoS 0 DSCP 0 18

19 Cisco Discovery Protocol (CDP) Benefits for IP-based Video Endpoints CDP provides numerous automation benefits for network administrators deploying IPbased video endpoints on their networks. Some of the most applicable benefits for IPbased video endpoints are: Automatic VLAN discovery QoS trust boundary Location awareness Ethernet Mismatch detection 19

20 Cisco Discovery Protocol CDP and Auxiliary VLANs Prior to CDP, MX/EX/C-series endpoints supported 802.1Q, but had to be manually configured Tagged (with VLAN ID specified) Untagged Default = Untagged CDP introduced for EX, MX, SX and C-Series in release TC5.0 Auto (use CDP) Automatically enabled when CUCM provisioning mode is selected Manual (equivalent to Tagged in previous releases) User must manually set the VLAN ID. If VLAN ID is received from CDP the ID received from CDP will take precedence over the manually configured value Off (equivalent to Untagged in previous releases) Ignores VLAN ID received from CDP Default = Off to preserve existing behavior for installed base customers upgrading to TC5.0 20

21 Agenda Deploying TelePresence endpoints on an enterprise network Provision TelePresence endpoints on CUCM Provision TelePresence endpoints on VCS/TMS Manage your TelePresence endpoints

22 Provision TelePresence Endpoints on CUCM MX/EX/SX/C-series Upon bootup from factory default state (VLAN mode = Off by default) 1. Do an untagged DHCP request, receive an address in the Data VLAN 2. Prompt the user for language choice and provisioning mode 3. If CUCM mode selected, set VLAN mode = Auto, restart network stack, and do a tagged DHCP request (with option 150) to receive a new address in the Aux VLAN 4. Look for DHCP Option 150 in Aux VLAN DHCP Offer. If present, proceed to step 5, otherwise prompt user for CUCM Provisioning address 5. Download configuration and firmware from UCM via HTTP port 6970, upgrade firmware and reboot if necessary, and proceed to register with UC Manager 22

23 Provision TelePresence Endpoints on CUCM CTS Series Cisco 7975G IP Phone TelePresence Primary Codec Access-Edge Switch Cisco Unified CallManager Cisco TelePresence Manager LAN / WAN 802.3af CDP DHCP TFTP SIP CDP CDP DHCP HTTP on port 6970 Shared Line SIP XML XML No 802.1Q VLAN tag Tagged with 802.1Q ID of Voice VLAN 23

24 Provision TelePresence Endpoints on CUCM CTS Series with Touch 12 Cisco Touch 12 TelePresence Primary Codec Access-Edge Switch Cisco Unified CallManager Cisco TelePresence Manager LAN / WAN CDP DHCP HTTP on port 6970 SIP XML Pairing with the Codec No 802.1Q VLAN tag Tagged with 802.1Q ID of Voice VLAN 24

25 Provision TelePresence Endpoints on CUCM CUCM Configuration CTS and introduced in UCM 8.5(1) Also back ported to 7.1(5) and 8.0(3) E20 introduced in UCM 8.5(1) Additional enhancements in 8.6(1) and 8.6(2) EX and C-Series introduced in UCM 8.6(1) MX200 and Profile 42 (C40) introduced in 8.6(2), and also available in latest 8.6(1) device pack MX300 and SX20 introduced in latest 8.6(2) device pack 25

26 Provision TelePresence Endpoints on CUCM CUCM Configuration TX 9000 and 9200 Supported in CUCM 8.5.1, and 9.0. TX and Supported in CUCM 7.1.5, 8.0.3, 8.5.1, 8.6.1, and

27 Provision TelePresence Endpoints on CUCM Functionality Supported / Not Supported Perspective: E20, EX, SX, MX and C-Series endpoints registered to UC Manager Functionality Status For Your Reference Networking & QoS Provisioning Registration Directories Cisco Discovery Protocol Auxiliary VLANs DSCP and 802.1p as per UCM service parameters Discard 802.1Q/p tagged frames received on PC port DHCP Option 150 Automatic configuration and firmware downloads Auto-Registration SIP TLS (part of the TE/TC6.0 release) Primary UCM node x Secondary/Tertiary UCM nodes Register using E.164 (Directory Number) Register using Alpha-numeric URI (Supported in UCM 9.0) Corporate Directory Personal Favorites / Speed dials x Personal Directory x TMS-style hierarchical phone books 27

28 Provision TelePresence Endpoints on CUCM Functionality Supported / Not Supported Perspective: E20, EX, SX, MX and C-Series endpoints registered to UC Manager Functionality Calling features Status Alpha-numeric URI dialing +, * and # character dialing Hold / Resume Transfer Call Forwarding Music on hold BFCP (presentation sharing). Requires CUCM 8.6 For Your Reference Encryption Conferencing One Button To Push (OBTP) When registered to UCM (part of the TE/TC6.0 release) Multisite (embedded) Multiway (when registered to UCM) (part of the TE/TC6.0 release) Multiway (when registered to VCS) EX, C-Series and MX200 x E20 Using CTS-Manager Using TMS On Touch 8 On OSD UI 28

29 Provision TelePresence Endpoints on CUCM Functionality Supported / Not Supported Perspective: E20, EX, SX, MX and C-Series endpoints registered to UC Manager Functionality Status For Your Reference Contact Center CTI Monitoring of device availability CTI Remote Call Control (remote-cc) (Supported in the TE6.0) Shared Line Appearances (E20 and TE6.0) Holde / Resume cbarge Unified Mobility Hand-off from mobile to desk x Hand-off from desk to mobile (It is planned to be supported in a future TE release CY13?) 29

30 Provision TelePresence Endpoints on CUCM Endpoint Supported The following endpoints can now be auto provisioned by CUCM TelePresence Endpoint category EX/MX/C-Series Based Endpoints (all run same TC software) + E20 (running TE software) CTS + TX Endpoints TelePresence Endpoint platform E20 EX60, EX90 MX200, MX300 SX20 C20, C40, C60, C90 Profile 42 Profile 52 Profile 65 CTS CTS CTS 1100 CTS CTS CTS 3010 CTS 3210 TX TX TX 9000 TX 9200 For Your Reference 30

31 Agenda Deploying TelePresence endpoints on an enterprise network Provision TelePresence endpoints on CUCM Provision TelePresence endpoints on VCS/TMS Manage your TelePresence endpoints

32 Provision TelePresence Endpoints on VCS/TMS Different Deployment Models Traditional TMS Deployment Proven TMS solution used and deployed by customers globally. Devices register to VCS control and to TMS server. VCS Control TMS Large Scale Provisioning Distributed architecture Devices register only to VCS Necessary to deploy large number of endpoints TMS Agent Deployment VCS Control w/tms agent Americas VCS Control w/tms agent TMS Application: Small scale, room based solution EMEA VCS Control w/tms agent Application: Large scale, personal video solution APAC 32

33 Provision TelePresence Endpoints on VCS/TMS With TMS Agent VCS w/ TMS Agent TMS TMS Agent Phone Books Provisioning Data CDR s System Status Regular and systematic intelligence updates between TMS Agent and TMS Server Endpoint registers to VCS for Call Control Endpoint receives provisioning and management messages from TMS Agent 33

34 Provision TelePresence Endpoints on VCS/TMS TMS Agent Legacy Mode Provisioning model using TMS Agent Legacy Mode in VCS 7.0 Large scale provisioning limitations from increased connections per node and bandwidth constraints Current Provisioning Model Increased connections and bandwidth limitations per node Cisco TMS 13.1 Core TMS Example: 28 bi-directional connections for 8 Nodes TMS Agent Legacy Result Cisco VCS X7.0 Cisco VCS X7.0 Core VCS TMS Agent Services Legacy2.0 FindMe Interface Core VCS TMS Agent Services Legacy2.0 FindMe Interface 34

35 Provision TelePresence Endpoints on VCS/TMS TMS Agent Services 2.0 Provisioning models leverages TMS Agent Services 2.0 in X7.1 and TMS 13.2 Redesigned architecture supports deployments up to 100,000 users and devices New Provisioning Model Cisco TMS 13.2 Core TMS TMS Agent Services 2.0 Centralized FindMe Interface Reduced connections per cluster with better bandwidth availability Example: 15 bi-directional connections per VCS Cluster Cisco VCS X7.1 Cisco VCS X7.1 Result Core VCS TMS Agent Services 2.0 Core VCS TMS Agent Services

36 Provision TelePresence Endpoints on VCS/TMS Provisioning Inside and Outside The Enterprise Firewall Network Administrator at head-office Create new users Configures policies Assign device templates and phone books Home Firewall Mobile Users Home-based Users TMS LDAP Directory Remote Office Firewall Remote Office Users VCS Control VCS Expressway Corporate Firewall DMZ Corporate Firewall Local Office Users 36

37 Provision TelePresence Endpoints on VCS/TMS TelePresence Endpoint Configuration Run the setup wizard Choose VCS as Provisioning Mode Enter Username, Password, Domain and External Manager 37

38 Provision TelePresence Endpoints on VCS/TMS Provisioning Signaling Flow Endpoint VCS w/ TMS Agent TMS SUBSCRIBE 401 Unauthorized SUBSCRIBE w/digest The Message Body of the NOTIFY message contains the provisioning configuration 200 OK NOTIFY 200 OK REGISTER 200 OK Regular and systematic intelligence updates between TMS Agent and TMS Server Register with the server provided in the NOTIFY (can be a different VCS than the provisioning VCS) 38

39 Provision TelePresence Endpoints on VCS/TMS Creating Users Create a folder structure to organize the users Add users manually Importing users from AD or LDAP 39

40 Provision TelePresence Endpoints on VCS/TMS Configuration Settings A configuration template can contain any settings, from any system categories, but the setting is only applied to systems that fall under the system category the setting belongs to. 40

41 Provision TelePresence Endpoints on VCS/TMS Device Templates Upload new Configuration Templates 41

42 Provision TelePresence Endpoints on VCS/TMS Provisioning of External Endpoints Endpoint VCS E VCS C w/ TMS Agent TMS SUBSCRIBE 401 Unauthorized SUBSCRIBE w/digest 200 OK NOTIFY 200 OK SUBSCRIBE 401 Unauthorized SUBSCRIBE w/digest 200 OK NOTIFY 200 OK Regular and systematic intelligence updates between TMS Agent and TMS Server REGISTER 200 OK Register with the server provided in the NOTIFY (in this case the VCS Expressway) 42

43 Provision TelePresence Endpoints on VCS/TMS Devices Supported Range of devices across E-Series, EX-Series, MX-Series, and Cisco Jabber Video for TelePresence 43

44 Provision TelePresence Endpoints on VCS/TMS Requirements and Considerations for TMS Agent Services 2.0 TelePresence endpoints Endpoint Software version VCS version TMS version Jabber video (Movi) Version 4.3 or later X E20 TE or later X EX60 TC 5.1 or later X EX90 TC 5.1 or later X MX200 TC 5.1 or later X MX300 TC 5.1 or later X Please note that there is a dependency between the TMS and VCS software version for TMS Agent. Check the TMS and VCS software release notes for details. The XML provisioning files required by TMS must be uploaded to TMS for the different TelePresence endpoints. 44

45 Provision TelePresence Endpoints on VCS/TMS Current Limitations The following endpoints can not be auto provisioned by VCS/TMS TelePresence Endpoint category EX/MX/C-Series Based Endpoints (all run same TC software) CTS Endpoints TelePresence Endpoint platform C20, C40, C60, C90 SX20 Profile 42 Profile 52 Profile 65 CTS CTS CTS 1100 CTS CTS CTS 3010 CTS 3210 TX TX TX 9000 TX

46 Agenda Deploying TelePresence endpoints on an enterprise network Provision TelePresence endpoints on CUCM Provision TelePresence endpoints on VCS/TMS Manage your TelePresence endpoints

47 Manage your TelePresence endpoints Scheduling and management features and functionality 47

48 Manage your TelePresence endpoints Management platform capabilities Platform Provisioning Basic monitoring Scheduling TMS CTS-Manager Unified CM 48

49 Managing your TelePresence endpoints using TMS Endpoint support prior to TMS 13.2 TMS supports scheduling and management of E20 and EX/MX/SX/C-series endpoints when they are registered to VCS. TMS 13.1 can now schedule and monitor CTS endpoints registered to UCM. A conference is booked in the usual manner. When you select your participants, the following connection methods apply: CTS to CTS (direct TIP connection). CTS to SIP or H.323 systems will connect using a Cisco TelePresence Server. CTS to multiple systems will connect using a Cisco TelePresence Server. TMS is also the only platform that natively supports scheduling and management of MXP series and T series endpoints and it is a required component for Movi deployments. In addition TMS can manage a range of 3 rd party endpoints. (see TMS Product Support Document for details). 49

50 Managing your TelePresence endpoints using TMS Endpoint support added in TMS 13.2 Improving the scheduling experience for CUCM registered devices One Button to Push for C/EX/MX/SX devices when using CUCM for call control. Supporting native point-to-point calling across the portfolio Direct point-to-point calls supported in scheduling between CTS and C/EX/MX/SX devices (no TelePresence server required!). 50

51 Managing your TelePresence endpoints using TMS TMS support for CTS endpoints TMS release 13.1 adds support for scheduling CTS endpoints. CUCM 8.5 or later is required. TMS will log into CUCM with admin credentials and return all registered CTS systems in CUCM. CTS or later is required for TMS management. When a CTS system is added to TMS, TMS can provide the following functions: OBTP with TelePresence Server Schedule P2P calls Read system information Monitor response status and call status Dial out from endpoint 51

52 Managing your TelePresence endpoints using TMS TMS One Button to Push OBTP is available on the Cisco Touch 8, Touch 12, 797x IP phones and OSD with remote control. Pre CTS release 1.8, all CTS multipoint meetings will only be scheduled on TelePresence Server. In CTS release 1.8 and running TMS13.2, MCU or TelePresence Server can be multipoint device. EX/MX/SX/C-Series on TC5 can use OBTP for TelePresence Server or MCU. Registration to VCS is required for OBTP on TC5 EX/MX/SX/C-Series endpoints prior to TMS TC5 on VCS or CUCM CTS 1.8 CTS or later TC5 on VCS or CUCM 52

53 Managing your TelePresence endpoints using TMS TMS different call launch options When TMS is used as scheduling and management platform, customers can choose between several different call launch options. From a CTS perspective, the Automatic Connect is a new experience. CTS endpoints configured for meetings with Automatic Connect will display meeting on UI, but user will not be able to launch call. CTS will be dialed to from multipoint device at meeting start. 53

54 Managing your TelePresence endpoints using TMS Call launch options Conference type support for TelePresence endpoints using TMS. CTS series endpoints EX/MX/SX/C-series endpoints, registered to CUCM* EX/MX/SX/C-series endpoints, registered to VCS MXP series, T series endpoints *Supported from TMS version OBTP Automatic Connect 54

55 Managing your TelePresence endpoints using TMS Directory and phone book support TMS is the central source for administrating phone books. To populate phone books you need to configure phonebook sources. TMS support several source types including: Cisco TMS endpoints Active Directory H.350 directories Manual lists There are two types of phone books: Local phone book, entries inserted through the touch panel/remote control on the endpoint. Accessed via the Favorites or My Contacts tab on the endpoint s user interface. Corporate phone book, retrieved from the phone book server. In most cases the corporate phone book extracts information from Active Directory or H.350 Directory. It allows for a hierarchy of phonebooks and multiple phone numbers on every entry. 55

56 Managing your TelePresence endpoints using CTS-Man Endpoint support CTS-Man 1.8 now supports monitoring and OBTP conference scheduling of CTS series and EX/MX/SX/C-series endpoints registered to UCM or VCS. CTS-Manager also provides the ability to schedule conferences that include endpoints other than CTS series and EX/C series endpoints when TelePresence Server or other transcoding devices are used. However, these endpoints are considered video conferencing endpoints, and they do not get an OBTP entry. These endpoints will need to manually dial-in, or be dialed out from the conferencing platform. 56

57 Managing your TelePresence endpoints using CTS-Man Simplified management for EX/MX/SX/C series EX/MX/SX/C Series endpoints are treated the same as CTS endpoints in the Admin GUI, except for provisioning. EX/MX/SX/C Series endpoint status displayed in CTS-Manager. 57

58 Managing your TelePresence endpoints using CTS-Man Provisioning of EX/MX/C series - Auto discovery Auto discovery is available for EX/MX/C series endpoint if registered to CUCM. CUCM 8.6(1) minimum and device pack is required or use manual method till 8.6(2) qualified. 8.6(2) has new endpoints. This option must be enabled in CUCM phone configuration EX90 automatically discovered CUCM address is displayed 58

59 Managing your TelePresence endpoints using CTS-Man Provisioning of EX/MX/C series - Manual provisioning Must manually add endpoints that are not registered to CUCM on version 8.6(1). The endpoint must use static IP. Phone number is automatically detected 59

60 Managing your TelePresence endpoints using CTS-Man Directory and phone book support CTS systems, E20 and EX/MX/C-series endpoints registered to CUCM: Corporate Directory Allows a user to look up a phone number for co-workers in the company directory. To support this feature, you must configure corporate directories. Personal Favorites / Speed dials Allows phone numbers to be readily accessed using the number buttons, or stored under favorites. x Personal Directory x Allows a user to store a set of personal numbers. This is supported on IP phones but not on TelePresence endpoints. x TMS-style hierarchical phone books 60

61 Deploying TelePresence endpoints Unified call control roadmap Video Applications Unified Call Control Expressway Firewall Traversal B2B and Remote Worker Advanced Enterprise Conferencing Services Distributed Conferencing Services SIP grooming IP PBX Trunking (video) 3rd Party/H.323 Video Endpoints 61

62 Provision TelePresence endpoints on CUCM Perspective when registering E20, EX/MX/SX/C-series to UCM Remaining Gaps Register endpoints to VCS when these features are required Encryption (Will be addressed in the TE6.0/TC6.0 release in 1HCY2012) Ad hoc conferencing Add Participant and Join features (Will be addressed in the TE6.0/TC6.0 release in 1HCY2012) Alpha-numeric URI registration (Will be addressed in the UCM 9.0 release in 1HCY2012) H.323 registration (No plans to support on UCM. Continue to use VCS for H.323 endpoints) IPv6 (planned for UCM 9.5 release in 1HCY2013) Registering through VCS Expressway (Teleworker) (use Cisco 800 series IOS router Virtual Office solution for endpoints on UCM) Movi support on UCM (Movi PVE in Jabber release planned for 1HCY2012) 62

63 Key Takeaways The Key Takeaways of this presentation are: CUCM will be the Call Control platform moving forward. Adding more and more enhanced video functionalities to the CUCM. Still utilize VCS for B2B communications and firewall traversal as well as other advanced video functions. VCS still important for H.323 and 3 rd party endpoint registration Focus on TMS as next-generation scheduling/management solution. We have added support for CTS endpoints and continue to develop TMS to eventually take over all scheduling and management for Cisco TelePresence deployments. 63

64 Q&A

65 Complete Your Online Session Evaluation Give us your feedback and you could win fabulous prizes. Winners announced daily. Receive 20 Passport points for each session evaluation you complete. Complete your session evaluation online now (open a browser through our wireless network to access our portal) or visit one of the Internet stations throughout the Convention Center. Don t forget to activate your Cisco Live Virtual account for access to all session material, communities, and on-demand and live activities throughout the year. Activate your account at the Cisco booth in the World of Solutions or visit

66 Final Thoughts Get hands-on experience with the Walk-in Labs located in World of Solutions, booth 1042 Come see demos of many key solutions and products in the main Cisco booth 2924 Visit after the event for updated PDFs, ondemand session videos, networking, and more! Follow Cisco Live! using social media: Facebook: Twitter: LinkedIn Group: 66

67