Now available to pre-order from Distech Controls

Transcription

1 In this release: A Leading Solution for Your Internet of Things Building 3 ECLYPSE Connected Equipment Controllers (ECY-303 Series) 5 Supporting Software for ECLYPSE Connected Equipment Controllers (ECY-303 Series) 7 Improved Servicing with IP-Based ECLYPSE Connected Equipment Controller (ECY-303 Series) 9 ECLYPSE Advanced Security 10 ECLYPSE ECY-RS485 Communication Module 11 ECx-Display 13 Now available to pre-order from Distech Controls ECLYPSE Connected Equipment Controller (ECY-303 Series) ECY-RS485 Communication Module ECx-Display Capacity-based upgrades for your ECLYPSE controllers ECLYPSE Capacity-Based Upgrades 15 Choose your field devices: ECLYPSE Connected Equipment Controller (ECY-303 Series) 17 Updated Documentation 18 Ordering information 19 Contact us for more information 19 This communication is intended for Distech Controls Partners only. Content cannot be distributed without explicit permission from Distech Controls. Innovative Solutions for Greener Buildings 2

2 For Your Internet Of Things Building DATA EC-Net EnerVue Data Mobile Apps E t Wi-Fi Adapter IP ENVYSION EC-Net AX ECLYPSE Connected System Controller ECLYPSE Connected Equipment Controller ECLYPSE Connected VAV Controller ECLYPSE Connected Terminal Unit Controller HORYZON Access Control Subnet Subnet Subnet Subnet Subnet Subnet LonWorks Modbus Modbus Smart Room Control: Lighting M-Bus BACnet MS/TP Smart Room Control: Shades/Sunblinds Visualization, Enterprise Software & Apps Switch/Routers Building IT Integration, Multiprotocol / Multi-location & Data Normalization Central Plant & Mechanical Equipment Control Air Handling & Roof Top Units, and Other Equipment Terminal Equipment & Room Control The entire ECLYPSE controller series offers the simultaneous support of wired IP (star or daisy-chain) and Wi-Fi (Access Point, Client, Hotspot, Mesh) connectivity on the same controller The entire ECLYPSE controller series offers the simultaneous support of wired IP (star or daisy-chain) and Wi-Fi (Access Point, Client, Hotspot, Mesh) connectivity on a same controller COMING SOON! EECLYPSE Connected Terminal Unit Controllers With preloaded applications for the control of fan coil, chilled beams, and other terminal equipment, Distech Controls, 2016, all rights reserved. Distech Controls, the Distech Controls logo, Innovative Solutions for Greener Buildings, ECLYPSE, EC-Net AX are trademarks of Distech Controls Inc. LONWORKS, and LONMARK are trademarks of Echelon Corporation; Niagara AX Framework is a trademark of Tridium, Inc.; BACnet is a registered trademark of the American Society of Heating, Refrigerating and Air-Conditioning Engineers. All other trademarks are the property of their respective owners.

3 The ideal combination of inputs and outputs for small AHUs and roof top units: 8 universal inputs 4 x 24VAC triac digital outputs 2 universal outputs 2 field configurable outputs (24VAC triac digital or universal) ECLYPSE Connected Equipment Controllers: ECY-303 Series IP-based small air handling unit and rooftop controller successfully distributes IP connectivity throughout buildings to the terminal equipment level. The ECLYPSE Connected Equipment Controller (ECY-303 series), with embedded ENVYSION Viewer, is an all-in-one controller, combining power supply, server, and a diversified I/O count into a compact design and footprint for easy in-cabinet installation. With an operating range (-40 C to 50 C) suited to installation inside outdoor equipment, this IP-based controller is designed to control small air handling units and rooftop units. Available to pre-order now, shipping May 31, COMING SOON! For simplified installation: Choose wired IP, Wi-Fi, or combine both on a same controller to suit the building s infrastructure, architecture and layouts, minimizing impact on the building envelope while reducing installation costs Two IP ports for IP-wired daisy chaining, with the integrated fail-safe feature allowing for increased redundancy and reliability in your IP-wired daisy chain: in case of power failure to one of the ECLYPSE Connected Equipment Controllers (ECY-303 series) controllers, communication data is still relayed to the following controller on the daisy-chain Supports daisy chaining of up to 4 Allure series communicating sensors, including EC-Smart-Vue, EC-Smart-Air and EC-Smart-Comfort Supports Distech Controls Smart Room Control solution, for a unified, end-to-end solution for the control of HVAC room terminal equipment, lighting, and shades/sunblind ECY-303-M3: up to 3 devices (Modbus RTU and TCP/IP) to cost effectively integrate meters, VFDs and other Modbus devices without additional gateways Detachable terminal blocks for quick and easy wiring With Embedded ENVYSION Viewer: Local hosting of graphics and advanced services including schedules, trend logs and alarms Model Points Universal inputs Universal outputs Triac outputs Field configurable outputs Modbus ENVYSION Viewer ECY No Yes ECY-303-M Up to 3 Yes OR M ECLYPSE Connected Equipment Controller (ECY-303 series) preloaded applications for rooftops units! 5 Innovative Solutions for Greener Buildings 6 (pending)

4 Supporting Software for ECLYPSE Connected Equipment Controllers (ECY-303 Series) How Distech Controls helps you deliver your project on time and under budget: Design & Engineering Installation & Configuration Controller Programming Logic GUI and Commissioning OR Commissioning, Maintenance and Servicing Xpressgfx Points: create your points list and import in EC-gfxProgram Save time from design to commissioning Increase data accuracy in coding, submissions, programming and commissioning Ease the submittal and installation processes Check out our video on Xpressgfx Points! XpressNetwork Utility: discover your ECLYPSE controllers and perform batch operations to settings (Ethernet, Wi-Fi, BACnet, RADIUS Server, Web Interface) for one or more ECLYPSE controllers found on the available IP networks (Wired and/or Wi-Fi) Increase efficiency during network configuration and maintenance Eliminating the need for individual device configuration Check out our video on XpressNetwork Utility!! EC-gfxProgram: build your custom programming sequence starting from your Xpressgfx Points list. Utilize the gfxapplications code libraries and pre-engineered blocs or convert previously created control sequences for ECL LonWorks and ECB BACnet controllers Reduce engineering costs Create your own standard code libraries while leveraging pre-engineered blocs or your previously created sequences Easily troubleshoot your application in real-time through live-debugging and a Watch List to monitor specific process variables and detect errors as they occur Check out our video on EC-gfxProgram! ECLYPSE Connected Equipment Controller (ECY-303 series) with Embedded ENVYSION Viewer Create your GUI with ENVYSION TechStudio Responsive design and one-time development for all devices Utilize ENVYSIONwidgets and ENVYSIONlibrary to create custom-feel dashboards for facility managers and building owners Embedded ENVYSION Viewer for local hosting of systembased graphics, and visualization of schedules, alarms, and trend logs directly from the controller ECLYPSE Connected Equipment Controller (ECY-303 series) with EC-Net AX ECLYPSE Connected Equipment Controller (ECY-303 series) as a BACnet/IP controller as part of your integrated building management solution with EC-Net AX, or to expand the capabilities of an existing EC-Net AX system with IP connectivity Check out our video Getting Started with ENVYSION! mydc Control mobile app: view, edit, and configure operating parameters of an HVAC system; while the colorcoded icons provide at-a-glance indication of alarms and override conditions. Increase onsite commissioning efficiency by up to 20% Provide quality service and improved response time anytime, anywhere Check out our video on the mydc Control app! 7 Innovative Solutions for Greener Buildings 8

5 Create your own Wi-Fi Hotspot and connect directly to your ECLYPSE controller with the mydc Control mobile app for faster commissioning, maintenance, and servicing! Improved Servicing with IP-Based ECLYPSE Connected Equipment Controller (ECY-303 Series)! Extend IP connectivity throughout the building to your small AHUs or rooftop units. Benefit from faster responsiveness when programming, configuring, creating and viewing graphics, and upgrading your system Easily connect to your controller and system via an onsite or offsite IP connection using a PC or mobile device for commissioning, servicing and maintenance Reduce the need for onsite visits and the associated costs of time and travel, and improve your responsiveness to service calls Leverage the option to add in Wi-Fi for servicing ECLYPSE Advanced Security As part of the ECLYPSE Connected IP and Wi-Fi product series, the ECLYPSE Connected Equipment Controller (ECY-303 series) controller was developed with advanced, built-in security features and authentication services for robust IP-based implementation. This includes: Built-in HTTPS server Protected using a WPA2 authentication or WPA2 Enterprise authentication Authorization and access levels Support for authentication through a RADIUS server Built-in support for TLS/SSL Did you know? All ECLYPSE Connected IP and Wi-Fi controllers contain a cryptographic module that is validated to FIPS 140-2, making them FIPS Inside (pending). Read more about the advanced security features of the ECLYPSE Connected IP and Wi-Fi product series in our white paper available on SmartSource. 9 Innovative Solutions for Greener Buildings 10

6 For BACnet MS/TP routing and Modbus RTU integration: Route BACnet MS/TP devices to BACnet/IP Cost effectively connect meters, VFDs and other Modbus devices without additional gateways Simplify installation and commissioning with a single configuration interface Model With Embedded ENVYSION Application Maximum Number of Points Supported Support of BACnet MS/TP Devices Maximum Number of Modbus Devices (RTU or TCP) ECLYPSE ECY-RS485 Communication Module New! The ECY-RS485 Communication Module is now available as part of your ECLYPSE Selection Tool available on SmartSource! Enable the concurrent support of BACnet MS/TP and Modbus devices on your ECLYPSE Connected System Controllers. Now 3 RS-485 ports on the same controller! ECY-S ECY-S1000E-16 ECY-S ECY-S1000E-48 ECY-S MS ECY-S1000E-48-MS ECY-S1000 ECY-S1000E Yes Yes Yes Yes Medium size equipment such as an AHU, small size plant room, rooftop unit Large size equipment such as large plant rooms and large data centers 16 No No Yes Yes The ECY-RS485 communication module provides two additional RS-485 ports and can easily be added to the ECLYPSE Connected System Controller at any time so as to enable the concurrent support of BACnet MS/ TP and Modbus RTU. Combined with the RS-485 port embedded in the ECLYPSE Control, Automation and Connectivity server, it is now possible to have three RS-485 ports on the same controller. Available to pre-order now, shipping May 31, Upgrade and enable the functionality of your ECLYPSE controller s RS-485 ports with our capacity-based upgrade to ECYS MS. 2. Up to 50 BACnet MS/TP devices recommended on each RS-485 port. 3. Up to 32 Modbus RTU devices recommended on each RS-485 port. 4. The ECY-S1000 models support a maximum of 320 points OR up to a maximum of 20 IO modules. Maximum number of Modbus RTU devices supported based on best practices. For examples of product architectures, please refer to the ECLYPSE Solution Guide. 11

7 Preloaded with a visual interface: View, edit, and override values and configure schedule and calendar View Tune PID loops with system response graphing View and acknowledge alarms Set up a list of favorites to rapidly access commonly-used values Perform diagnostics and take corrective actions such as overriding a sensor, pump, fan, or changing a setpoint Test and commission HVAC systems singlehandedly Did you know? The ECx-Display can be used as a handheld tool, making it great for servicing! Simplified installation: Plug & Play connection using a dedicated subnet port Can be DIN rail or panel mounted Option of connecting Allure series communicating sensors and ECx-Display to the same controller with the ECx-Subnet-Adapter Easy-to-use, rugged design: Convenient jog-dial offers quick and easy navigation With an IP-54 Rating, the ECx-Display is dust and splash resistant Black enclosure offered with your choice of a blue or black LEXAN face ECx-Display Streamlined mechanical room display for your ECB series BACnet controllers, ECL series LonWorks controllers, and ECY series ECLYPSE Connected BACnet/IP and Wi-Fi controllers Managers and technicians will benefit from this powerful, user-friendly color backlit LCD display, providing convenient access to important system data in real time. The ECx-Display allows you to view, edit and configure operating parameters of an HVAC system; while color-coded icons provide an at-a-glance indication of alarms and override conditions. Available to pre-order now, shipping May 31, Model Product Number Product description ECx-Display (Blue) ECx-Display (Black) PDIDS-ECXBLU-00 PDIDS-ECXBLK-00 Panel Mount LCD Operator Interface for ECB/ECL-203, 300, 400 & 600 Controllers and ECLYPSE Controllers Series. Color: Blue LEXAN Panel Mount LCD Operator Interface for ECB/ECL-203, 300, 400 & 600 Controllers and ECLYPSE Controllers Series. Color: Black LEXAN 13 Innovative Solutions for Greener Buildings 14

8 For the ECLYPSE Connected System Controller only: Add ENVYSION, a responsive, web-based graphic design and visualization interface Add the support of BACnet MS/TP routing on the controller s enabled port Expand point capacity up to 320 points For the ECLYPSE Connected Equipment Controller (ECY-303 only): Add the support of Modbus: cost effectively integrate meters, VFDs and other Modbus devices ECLYPSE Capacity-Based Upgrades A field-upgradeable solution for every project s budget requirements Distech Controls understands the important of choice when ordering the solutions for your projects. This was at the heart of our decision to offer a variety of ECY-S1000 series server models, for a scaled approach to cost effectively addressing your requirements. However, we understand that both needs and budgets can change with time. That is why Distech Controls is proud to introduce our field-downloadable capacity-based upgrades for the ECLYPSE Connected System Controller and ECLYPSE Connected Equipment Controller (ECY-303 series). Licence upgrades available from customer service starting May 31, For both the ECLYPSE Connected System Controller and ECLYPSE Connected Equipment Controller (ECY-303 series): Upgrade your capacity with no additional hardware: simply enables your upgrade to your existing controller Implement your solution in phases Future-proof your solution through a scalable approach that can be expanded to meet future requirements Product model name ECY-UPG ECY-UPG MS ECY-UPG ECY-UPG ECY-UPG-48-MS-320 ECY-UPG MS ECY-UPG-ENVY Capacity-based Upgrade Upgrade from ECY-S to ECY-S or Upgrade from ECY- S1000E-16 to ECY-S1000E-48 Upgrade from ECY-S to ECY-S MS* or upgrade from ECY-S1000E-16 to ECY-S1000E-48-MS Upgrade from ECY-S to ECY-S1000 or Upgrade from ECY-S1000E-16 to ECY-S1000E Upgrade from ECY-S to ECY-S1000 or Upgrade from ECY-S1000E-48 to ECY-S1000E Upgrade from ECY-S MS to ECY-S1000 or Upgrade from ECY-S1000E-48- MS to ECY-S1000E Upgrade from ECY-S to ECY-S MS or Upgrade from ECY-S1000E-48 to ECY-S1000E-48-MS Add ENVYSION (Studio & Viewer): Upgrade ECY-S to ECY-S1000E-16 Upgrade ECY-S to ECY-S1000E-48 Upgrade ECY-S MS to ECY-S1000E- 48-MS Upgrade ECY-S1000 to ECY-S1000E Features Expand capacity from 16 to 48 points Enable support of 10 Modbus devices Expand capacity from 16 to 48 points Enable support of 10 Modbus devices Enable support of BACnet MS/ TP routing Expand capacity from 16 to 320 points Enable support of 32 Modbus devices Enable support of BACnet MS/ TP routing Expand capacity from 48 to 320 points Enable support of 32 Modbus devices Enable the support of BACnet MS/TP routing Expand capacity from 48 to 320 points Enable support of 32 Modbus devices Enable the support of BACnet MS/TP routing on your controller Enable ENVYSION (Studio & Viewer) responsive, web-based graphic design and visualization interface on your controller ECY-UPG-XX-M3 Upgrade from ECY-303 to ECY-303-M3 Enable the support of Modbus on your controller

9 Choose your field devices: ECLYPSE Connected Equipment Controller (ECY-303 Series) PDCSY-AV-622 Air Velocity Sensor PDCSY-RH-600 Series Duct Temperature, Relative Humidity Sensors IO Modules and Relays Wire & Cable 101/102 Series HVAC Drives PDCSY-ST Series Low Limit Freeze Protection Switches PDCSY-PM-CSX Current & Switches ECLYPSE Wi-Fi Adapter PDCSY-PA-60-x Series Multi-Range Pressure Sensors Damper Actuators PDCSY-TT Sensor Series Duct Temperature Sensors Valves & Actuators PDCSY-GS-CO2 Series Duct/Room CO2 Sensors PDCYS-PS Series Power Supplies

10 Updated Documentation The following is available on your SmartSource, under the Documents section: Document Version Status Datasheets ECLYPSE Connected System Controller 05DI-DSIPCTR-16 Updated ECLYPSE ECY DI-DSIP New! ECLYPSE Solution Guide 05DI-DSECYXX-14 Updated ECx-Display 05DI-DSXDISP-10 New! Hardware Installation Guides ECLYPSE Connected System Controller 05DI-HIIPCTR-16 Updated ECLYPSE ECY DI-HIIP New! ECx-Display 05DI-HIXDISP-10 New! Device Drawings / Visio Stencils ECY-RS485 05DI-VDRS DI-ADRS DI-PDRS New! ECY-303 ECx-Display 05DI-VDIP DI-ADIP DI-PDIP DI-VDXDISP-10 05DI-ADXDISP-10 05DI-PDXDISP-10 New! New! Ordering and pricing information for all products in this release available in your 2016 price list on SmartSource. For more information concerning this product release, please contact your Regional Sales Manager or visit our website at ECLYPSE Series Controllers and Power Supplies Visio Stencils 05DI-VDECYXX-12 - ECY Series. vss Updated Other PICS (ECY-S1000) 05DI-DSIPBBC-11 Updated PICS (ECY-VAV) 05DI-DSIPVAV-10 New! PICS (ECY-303) 05DI-DSIP New! ECLYPSE - Security Features Updated ECLYPSE Selection Tool Updated 18, Distech Controls Inc., All rights reserved.