GP-X SERIES Conforming to EMC Directive

Transcription

1 High Speed High Accuracy Eddy Current Type Digital Displacement Sensor GP-X SERIES Conforming to EMC Directive 25!s &.2%F.S. High-speed sampling and high resolution. The new choice for even more variegated data collection and processing.

2 The unique sensing technology developed by our SUNX team has made possible an ultra-high speed minute displacement measurement function, essential for high-precision processes, that boasts the highest resolution in the industry. We ve realized a 25 s (4, times / sec.) ultra high sampling speed With a 25!s ultra high sampling speed, the GP-X series won t miss even high speed work displacements. These devices boast a.7 % F.S. / C temperature characteristics By combining the sensor head with the controller, we ve realized.7 % F.S. / C. They are highly resistant to ambient temperature changes enabling stable micro-displacement measurements. They possess a.2 % F.S. resolution for highly accurate measurement With the industry s highest resolution,.2 % F.S. (Note), they can perform high-accuracy measurements of micro-displacements. (Average number of samples: 64) Note: GP-XC3SE and GP-XC5SE Resolution:.4 %F.S. They perform with a.3 %F.S. linearity for stainless steel and iron Because they perform with a.3 % F.S. linearity, they can be used for sensing stainless steel and iron enabling precise measurements not affected by the work s material. Specifications corresponding to each material (stainless steel, iron, aluminum) has already been inputted in the controller enabling the easy selection of the setting that is most suitable for the particular material used. Output value Optimal correction of the output feature Aluminum Stainless steel Distance Before correction Iron Output value Distance After correction 1

3 A total of 6 types of sensor head 6 types of sensor heads from the ultra compact "3.8 mm ".15 in cylindrical type to the long range sensing "22 mm ".866 in / M12 screw type are available. GP-X22KL Sensing range : to 1 mm to.394 in Appearance : "22 mm / M12 ".866 in GP-X12ML Sensing range : to 5 mm to.197 in Appearance : M12 NPN output type, PNP output type DIN 48 mm 1.89 in size GP-X1M Sensing range : to 2 mm to.79 in Appearance : M1 GP-X3SE Sensing range : to.8 mm to.31 in Appearance : "3.8 mm ".15 in GP-X5SE Sensing range : to 1 mm to.39 in Appearance : "5.4 mm ".213 in GP-X8S Sensing range : to 2 mm to.79 in Appearance : "8 mm ".315 in s with superior workability and maintainability Replacement of sensor heads possible As a result of damage or other mishap rendering maintenance necessary, you can replace only the sensor head leaving the controller as it is. One-touch connector hook up The sensor head and the controller connection is a simple one-touch connector type. extensions possible Between the sensor head and the controller, a GP-XCCJ7 extension cable (optional) can be used up to a 1 m ft total length. One-touch connector Extension Cable GP-XCCJ7 : 7 m ft Sensor cable : 3 m ft Total length : 1 m ft 2

4 The SUNX sensor design policy has realized controllers that are easy to use on-site. Panel mounting type Compact type DIN 48 mm 1.89 in size Out of setting range (upper threshold) Sensing values within setting range Out of setting range (lower threshold) The 5-digit, dual, 2-color digital display offers great visibility If the measurement results fall within the setting range (GO), they will appear on the lower digital display in green. If they are out of range (HI, LO), they will be displayed in the upper digital in orange. The display position and color change allows for accurate visibility even for momentary changes. Simple setting mode Manual mode Sensing values Setting value verifiable even in sensing mode Upper threshold value Digital input display enabling easy setting Its dual digital display enables numerical setting while verifying setting items for each mode. Even when sensing, it enables the verification of the main settings. Average number of samples setting value Lower threshold value 3

5

6 Various functions made available through the use of RS-232C standard interfaces. Exclusive RS-232C cable (Accessory for the intelligent monitor GP-XAiM) Cable length : 3 m ft [PC side connector : D-SUB (9 pins)] Link cable for controller communication unit (optional) SL-F Cable length : 15 mm 5.96 in, 25 mm in, 1, mm in communication unit GP-XCOM The RS-232C communication connector is standard equipment It is capable of various controls such as saving measurement data to PC and the controller s inputted settings and loading stored memory. Connector for RS-232C communication 5

7 Sensor A and sensor B can be linked together and measurement can be calculated (a b) to detect difference in object. object Sensor B Sensor A b (a b) a (a b) : difference in object Intelligent monitor (GP-XAiM) optimal for collecting and analyzing measurement data. (Exclusive RC-232C cable is attached) An intelligent monitor capable of the settings for each measurement conditions and waveform display monitoring. It can perform waveform monitoring, which could until now only be done by the oscilloscope, as well as the simple loading and saving onto a PC of settings for each condition and function. Enables sensors data comparisons and calculations 3-value judgment output for calculating measurement data conformity and calculation results between 2 interconnected controllers is rendered possible. The calculation function equipment renders digital panel controllers unnecessary. Datalink between sensors possible The controller communication unit GP-XCOM (optional) can be linked to up to 8 controllers and load via just one RS-232C cable each controller settings and measurement data to a PC. Maximum of eight controllers communication unit Link cable Data sent to a PC via the RS-232C 6

8 GP-X ORDER GUIDE Type Non-threaded type sensor head Threaded type sensor head " OPTIONS Appearance (mm in) s "3.8 ".15 "5.4 " "8 " M1 M M to.8 mm to.31 in Sensing range to 1 mm to.39 in to 2 mm to.79 in to 2 mm to.79 in to 5 mm to.197 in to 1 mm to.394 in Set Model No. ( model No.) GP-XC3SE (GP-X3SE) (Note) GP-XC3SE-P (GP-X3SE) (Note) GP-XC5SE (GP-X5SE) (Note) GP-XC5SE-P (GP-X5SE) (Note) GP-XC8S (GP-X8S) GP-XC8S-P (GP-X8S) GP-XC1M (GP-X1M) GP-XC1M-P (GP-X1M) GP-XC12ML (GP-X12ML) GP-XC12ML-P (GP-X12ML) GP-XC22KL (GP-X22KL) GP-XC22KL-P (GP-X22KL) Comparative output NPN open-collector PNP open-collector NPN open-collector PNP open-collector NPN open-collector PNP open-collector NPN open-collector PNP open-collector NPN open-collector PNP open-collector NPN open-collector PNP open-collector Note: High resolution types (GP-XC3S, GP-XC5S:.2 % F.S., average number of samples: 64) are available. These products correspond to the Export Trade Administration Act of Japan. Shipping them outside Japan requires special permission from the Japanese government regarding stipulations in Foreign Exchange and Foreign Trade Law. Please contact our office for details. Designation BCD output unit Model No. GP-XBCD Description This unit outputs measurement values in BCD data format at a high speed. Sampling frequency : 2 khz Cable with connector on one end for BCD output unit GP-XBCC3 Length: 3 m ft Cable for BCD data output unit. 26-core cable with connector on one end communication unit GP-XCOM Up to 8 controllers can be linked. Link cable for controller communication unit SL-F15 SL-F25 SL-F1 Length: 15 mm 5.96 in Length: 25 mm in Length: 1, mm in This cable links the controller communication units. Select as per the cable length. Intelligent monitor GP-XAiM Monitoring settings for each measurement condition and measurement waveforms is enabled by way of a PC. One exclusive RS-232C cable (3 m ft length) is attached. Extension cable for sensor head GP-XCCJ7 BCD output unit Cable with connector on one end for BCD output unit Length: 7 m ft communication unit Link cable for controller communication unit This cable with connector is for extensions between the sensor head and controller. Intelligent monitor GP-XAiM Extension cable for sensor head GP-XCCJ7 7 BCD output unit GP-XBCD Cable with connector on one end for BCD output unit GP-XBCC3 Link cable for controller communication unit SL-F communication unit GP-XCOM

9 GP-X SPECIFICATIONS s Item Sensing range (Note 1) Standard sensing object Pollution degree Protection Non-threaded type Threaded type Type For.8 mm.31 in sensing For 1 mm.39 in sensing For 2 mm.79 in sensing For 2 mm.79 in sensing For 5 mm.197 in sensing For 1 mm.394 in sensing Model No. Temperature characteristics (Note 2) Environmental resistance Material Cable Ambient temperature Ambient humidity Voltage withstandability Insulation resistance Vibration resistance Shock resistance Enclosure Cable protector Sensing Part Cable extension Weight (Note 4) Accessories GP-X3SE to.8 mm to.31 in GP-X5SE to 1 mm to.39 in GP-X8S to 2 mm to.79 in GP-X1M to 2 mm to.79 in GP-X12ML to 5 mm to.197 in GP-X22KL to 1 mm to.394 in Stainless steel (SUS34) / Iron sheet [Cold rolled carbon steel (SPCC)] 6 6 t 1 mm t.39 in.7 % F.S./ C or less 3 (Industrial environment) IP67 (IEC), IP67g (JEM) 1 to 55 C 14 to 131 F, Storage: 2 to 7 C 4 to 158 F 35 to 85 % RH, Storage: 35 to 85 % RH 25 V AC for one min. between all supply terminals connected together and enclosure 2 MΩ, or more, with 25 V DC megger between all supply terminals connected together and enclosure 1 to 15 Hz frequency,.75 mm.3 in amplitude in X, Y and Z directions for two hours each 5 m/s 2 acceleration (5 G approx.) in X, Y and Z directions for five times each Stainless steel (SUS33) High frequency coaxial cable with connector, 3 m ft long (Note 3) Extension up to total 1 m ft is possible with the optional cable 4 g approx. 4 g approx. 4 g approx. PP Brass (Nickel plated) ABS PAR ABS PA 5 g approx. 45 g approx. 8 g approx. Nut: 2 pcs., Toothed lock washer: 1 pc. Notes: 1) The sensing range is specified for the standard sensing object. 2) This value represents 2 to 6 % of the maximum sensing distance when combining the sensor head and the controller. 3) For the flexible cable type, please contact our office. 4) The given weight of the threaded type sensor head is the value including the weight of the nuts and the toothed lock washer. 8

10 GP-X SPECIFICATIONS s Item Supply voltage Current consumption Resolution (Note 1) Type Set model No. Sampling frequency Linearity (Note 1) Temperature characteristics (Note 2) Analog voltage output Response time Comparative outputs (HI, GO, LO) Utilization category Output number Output operation NPN output GP-XC 24 V DC 1 % Ripple P-P 1 % or less 15 ma or less PNP output GP-XC -P GP-XC3SE / GP-XC5SE:.4 % F.S. (64 times average processing) GP-XC8S / GP-XC1M / GP-XC12ML / GP-XC22KL:.2 % F.S. (64 times average processing) 4 khz (25!s) Within.3 % F.S..7 % F.S./ C or less Output voltage: 5 to 5 V (Note 3), Output impedance: 1 Ω approx. 75!s (maximum speed) NPN open-collector Maximum sink current: 1 ma Applied voltage: 3 V DC or less (between comparative output and V) Residual voltage: 1.6 V or less (at 1 ma sink current).4 V or less (at 16 ma sink current) DC-12 or DC-13 HI / GO / LO 3 value output PNP open-collector Maximum source current: 1 ma Applied voltage: 3 V DC or less (between comparative output and V) Residual voltage: 1.6 V or less (at 1 ma source current).4 V or less (at 16 ma source current) HI : ON when measured value the upper limit value GO: ON when upper limit value j measured value j lower limit value LO : ON when lower limit value measured value External input Short-circuit protection Serial I/O Zero-set setting method MODE HI GO LO TIMING Upper line digital display part Lower line digital display part Pollution degree Ambient temperature Ambient humidity EMC Vibration resistance Shock resistance Material Weight Accessory Indicators Environmental resistance Photocoupler input Input current: 9 ma or less Operating voltage: ON voltage V or more (between 24 V and input) OFF voltage 4 V or less (between 24 V and input) Input impedance: 5 kω approx. Incorporated Photocoupler input Input current: 9 ma or less Operating voltage: ON voltage V or more (between V and input) OFF voltage 4 V or less (between V and input) Input impedance: 5 kω approx. RS-232C Push button setting / External input setting Orange LED (lights up when in mode status) Orange LED (lights up when the upper limit value is exceeded) Green LED (lights up when within the upper and lower limit values) Orange LED (lights up when less than the lower limit value) Green LED (lights up as per the external or internal trigger timing) 5 digit orange LED (display of numerical values out of upper and lower limit values) 5 digit green LED (display of numerical values within the upper and lower limit values) 3 (Industrial environment) to 5 C 32 to 122 F (No dew condensation), Storage: to 5 C 32 to 122 F 35 to 85 % RH, Storage: 35 to 85 % RH EN , EN to 55 Hz frequency,.75 mm.3 in amplitude in X, Y and Z directions for two hours each 1 m/s 2 acceleration (1 G approx.) in X, Y and Z directions for five times each Enclosure: Polycarbonate 12 g approx. ATA4811 (controller mounting frame): 1 set Notes: 1) This value is obtained at a constant 25 C 77 F. 2) This value represents 2 to 6 % of the maximum sensing distance when combining the sensor head and the controller. 3) Adjusted to a to 5 V factory setting. 9 BCD output unit Current consumption Output 5 digits BCD, Polarity indication, VALID Hold input Material Weight Model No. ( ) Accessory GP-XBCD 2 ma or less N-channel MOSFET open drain Maximum sink current: 5 ma Applied voltage: 3 V DC or less (between output and GND) Residual voltage: 1 V or less (at 5 ma sink current) Non-voltage contact or NPN open-collector input Low: to 1 V High: Open Enclosure: ABS 3 g approx. Mounting bracket [Stainless steel (SUS34)]: 1 pc. Note: Connects to the control device with GP-XBCC3 cable with connector on one end for BCD output unit (3 m ft cable length, optional). communication unit Model No. GP-XCOM Current consumption Material Weight Accessory 5 ma or less Enclosure: ABS 2 g approx. Mounting bracket [Stainless steel (SUS34)]: 1 pc. Note: Each GP-XCOM is connected using a link cable for controller communication units (SL-F, optional). When GP-XCOM is used, controllers cannot communicate if their software versions are not compatible (Ver. 1.6 or earlier version with Ver 2. or later version). Check the software version and use the correct combination.

11 GP-X I/O CIRCUIT AND WIRING DIAGRAMS NPN output type controller PNP output type controller I/O circuit diagram Terminal No. I/O circuit diagram Terminal No. Main circuit Tr6 Tr5 ZD6 Tr4 ZD5 D1 V 18 Comparative output LO Load ZD1 Tr1 1 Load ZD2 Comparative 1mA max. 2 output GO Tr2 Load ZD3 Tr3 Comparative output HI 1mA max. 3 Load ZD4 Alarm output 1mA max. 5 Load Strobe output 1mA max. 6 1 ma max. 7 Interference Used for interference prevention output prevention function. 4 Output COM. V 47 Ω 47 Ω 9 Analog voltage output ( 5 to 5 V) (Note) 8 For analog output GND 24 V 5 kω Zero-set input 1 24 V 5 kω Memory selection input V 5 kω Memory selection input V 5 kω Timing input V DC 1 % Main circuit D1 V 18 4 Output COM. 1mA max. Tr1 ZD1 1 Comparative output LO 1mA max. Tr2 2 ZD2 Comparative output GO 1mA max. Load 24V DC Tr3 1% 3 ZD3 Comparative output HI 1mA max. Load Tr4 ZD4 5 Alarm output 1mA max. Load Tr5 ZD5 6 Strobe output Load Interference prevention output Load Used for interference Tr6 7 ZD6 prevention function. V 47 Ω 47 Ω 9 Analog voltage output ( 5 to 5 V) (Note) 8 For analog output GND Input COM. ( 24 V) 13 m1 m1 m1 m2 m1 5 kω Zero-set input 1 5 kω Memory selection input kω Memory selection input V 5 kω Reset input 15 5 kω Timing input V Interference prevention input 5 kω Used for interference 16 prevention function. Input COM. 13 ( V) m1 m2 m1 m1 m1 Internal circuit Users circuit Note: Devices connected to the analog voltage output must have an input impedance set at 1 MΩ or more. m1 m2 Symbols D1: Reverse supply polarity protection diode ZD1 to ZD6: Surge absorption zener diode Tr1 to Tr6: NPN output Non-voltage contact or NPN open-collector Zero-set input, reset input, memory selection input Low ( to 4 V) : Effective High ( V or open) : Ineffective NPN open-collector or m1 m2 5 kω Reset input 15 5 kω Interference 16 prevention input Used for interference prevention function. Internal circuit Users circuit Note: Devices connected to the analog voltage output must have an input impedance set at 1 MΩ or more. Symbols D1: Reverse supply polarity protection diode ZD1 to ZD6: Surge absorption zener diode Tr1 to Tr6: PNP output Non-voltage contact or PNP open-collector Zero-set input, reset input, memory selection input Low ( V or open) : Ineffective High ( V to 24 V) : Effective PNP open-collector or Timing input Low ( to 4 V): Effective High ( V or open): Ineffective Memory selection input Memory No Memory selection 1 High Low High Low Memory selection 2 High High Low Low Timing input Low ( V or open): Ineffective High ( to 24 V): Effective Memory selection input Memory No Memory selection 1 Low High Low High Memory selection 2 Low Low High High 1

12 GP-X I/O CIRCUIT AND WIRING DIAGRAMS Terminal arrangement ABCDEFGH Connector for RS-232C communication Connector for sensor head connection Terminal No Description Comparative output LO Comparative output GO Comparative output HI Output COM. Terminal No. A B C 5 Alarm output D Strobe output Interference prevention output For analog output GND Analog output E F G H Zero-set input Description Memory selection input 1 Memory selection input 2 Input COM. Timing input Reset input Interference prevention input V V BCD output unit Connector pin position and cable color Connector Cable pin No. Sheath color ID mark A B C D E F G H I J K L Orange Orange Gray Gray White White Yellow Yellow Pink Pink Orange Orange Gray Gray White White Yellow Yellow Pink Pink Orange Orange Red: 1 Black: 1 Red: 1 Black: 1 Red: 1 Black: 1 Red: 1 Black: 1 Red: 1 Black: 1 Red: 2 Black: 2 Red: 2 Black: 2 Red: 2 Black: 2 Red: 2 Black: 2 Red: 2 Black: 2 Red: 3 Black: 3 M N O Gray Gray White White Red: 3 Black: 3 Red: 3 Black: 3 Signal A B C D A1 B1 C1 D1 A2 B2 C2 D2 A3 B3 C3 D3 A4 B4 C4 D4 POLE VALID HOLD GND GND Note: The shield wire is connected externally at V Description Measurement value to the 1 digit Measurement value to the 1 1 digit Measurement value to the 1 2 digit Measurement value to the 1 3 digit Measurement value to the 1 4 digit Polarity signal output VALID output Hold input Ground Ground Not connected Measurement value BCD output High (OFF):, Low (ON): Low (ON) when the data output is enabled This input is to maintain the external data output. The data output is maintained during low (ON). Not used Connector for controller connection Connector for BCD output 11

13 GP-X PRECAUTIONS FOR PROPER USE Conditions in use for CE conformity This sensor is a CE conformity product complying with EMC Directive. The harmonized standard with regard to immunity that applies to this product is EN and the following conditions must be met to conform to that standard. Conditions The controller should be connected less than 1 m ft from the power supply. The signal line to connect with the controller should be less than 3 m ft. A ferrite clamp must be mounted within 1 mm.394 in from connector fitted onto the GP-XBCC3 cable with connector on one end for BCD output units. The EN that previously applied to the products for conforming to EMC Directive was replaced by EN starting April 1st. 22. Linearity in case of disc-shaped or cylindrical objects In case the sensing object is disc-shaped or cylindrical, the linearity varies with the sensing object size. In the event the sensing object is larger than the sizes indicated in the table below, the linearity specification (within.3 % F.S.) is satisfied by performing zero-adjustment and span adjustment when in contact using the scaling function. GP-X3SE GP-X5SE GP-X8S GP-X1M GP-X12ML GP-X22KL <In case of disc> This product is not a safety sensor. Its use is not intended or designed to protect life and prevent body injury or property damage from dangerous parts of machinery. It is a normal object detection sensor. The sensor head and the controller are adjusted in order to conform to the default specification linearity. In the event of replacing sensor heads, input the sensor head s characteristic code and conduct 3-point correction (calibration). Should you use an extension cable, turn the sensor head cable length selection switch located on the back of the controller to 3 m + 7 m ft ft. Then reintroduce the power supply and conduct 3-point correction (calibration). Iron disc Mounting with set screw ( Disc diameter " (mm in) " mm in t : 1 mm.39 in ( t Cylinder diameter " (mm in) <In case of cylinder> Iron cylinder " (mm in)? # : 135 mm in Mounting sensor head The tightening torque should be under the value given below. Make sure to use an M3 or smaller set screw having a cup-point. Set screw (M3 or less) (Cup-point) A Model No. A (mm in) Tightening torque GP-X3SE 4 to to.63.1 N m or less GP-X5SE.44 N m or less 5 to to.63 GP-X8S.58 N m or less Mounting with nut <GP-X1M> B F E <GP-X12ML> Distance from surrounding metal <GP-X22KL> GP-X1M or more 9.8 N m or less GP-X12ML or more 2 N m or less GP-X22KL or more (Note 1) 2 N m or less Notes: 1) Without nut. If a nut is installed, the dimension will be 23.5 mm or more. 2) Mount such that the nuts do not protrude from the threaded portion. <Embedding of the sensor head in metal> Since the analog output may change if the sensor head is completely embedded in metal, keep the minimum distance specified in the table below. C Attached toothed lock washer D Mounting plate Mounting plate Mounting plate Metal Mutual interference <Face to face mounting> <Parallel mounting> Correction coefficient Metal Stainless steel (SUS34), Iron Aluminum B Model No. B (mm in) Tightening torque As metal around the sensor may affect the sensing performance, pay attention to the following points. GP-X3SE GP-X5SE GP-X8S GP-X1M GP-X12ML GP-X22KL Attached toothed lock washer GP-X3SE GP-X5SE GP-X8S C (mm in) "1 ".394 "18 ".79 "14 ".551 "5 "1.969 "5 "1.969 GP-X1M GP-X12ML GP-X22KL 1 D (mm in) If several sensor heads are mounted close together, some specifications may not be satisfied. Therefore, proceed with the interference prevention function enabled. The interference prevention function eliminates interference among sensors by alternating sensor oscillations. Contact our office for details about time charts etc. If not using the interference prevention function, leave a distance more than the values given below. E (mm in) F (mm in) GP-X3SE GP-X5SE GP-X8S GP-X1M GP-X12ML GP-X22KL Sensing range The sensing range is specified for the standard sensing object [stainless steel (SUS34) / iron [Cold rolled carbon steel (SPCC)], 6 6 t 1 mm t.39 in]. For sensing metals other than the standard sensing objects, use the correction coefficient stated below as a guideline. Verify with the actual sensor before using..5 approx. B Attached toothed lock washer 12

14 GP-X PRECAUTIONS FOR PROPER USE Connection of sensor head and controller Make sure that the power supply is off while connecting the sensor head to the controller. Connection Hold the sensor head s connector by the outer ring and insert it into the connector provided on the controller for sensor head connection. Insert till you hear a click sound. Mounting controller Use the attached controller mounting frame (ATA4811) and mount the controller onto the panel by fastening the frame s screws. mounting frame (ATA4811) Removing Connector for sensor head connection Connector outer ring When removing, hold the connector outer ring and pull it straight out. Cable extension for sensor head When using a sensor head extension cable, turn the sensor head cable length selection switch side to the controller s sensor head connector to 3 m 7 m ft ft with the power supply is off. After switching, reintroduce the power supply. Connector for sensor head connection cable length selection switch UP side : Standard (3 m ft) extension (7 m ft) DOWN side : Standard (3 m ft) (factory shipment setting) The coaxial connector for the extension cable is connected to the V power supply. If installing to a metal plate or similar, insulate the connector from the surrounding metal. Refer to the DIMENSIONS (P.14) for the panel cut-out dimension. The mountable panel thickness is 1 to 5 mm.39 to.197 in. However, if using a controller communication unit or BCD output unit, make the panel thickness between 1 and 2.5 mm.39 and.98 in. Wiring Make sure that the power supply is off while wiring. Take care that wrong wiring will damage the sensor head or the controller. Verify that the supply voltage variation is within the rating. If power is supplied from a commercial switching regulator, ensure that the frame ground (F.G.) terminal of the power supply is connected to an actual ground. In case noise generating equipment (switching regulator, inverter motor, etc.) is used in the vicinity of the sensor head or the controller, connect the frame ground (F.G.) terminal of the equipment to an actual ground. Do not run the wires together with high-voltage lines or power lines or put them in the same raceway. This can cause malfunction due to induction. Make sure to use an isolation transformer for the power supply. It an auto-transformer (single winding transformer) is used, this product or the power supply may get damaged. In case a surge is generated in the used power supply, connect a surge absorber to the supply and absorb the surge. The analog voltage output does not incorporate a short-circuit protection circuit. Do not directly connect a power supply or a capacitive load. Make sure that stress by forcible bend or pulling is not applied directly to the sensor cable joint. If using separate power supplies for multiple controllers, use the same V or V supply for all. Others Do not use during the initial transient time (2 sec. approx.) after the power supply is switched on. This sensor is suitable for indoor use only. Avoid dust, dirt, and steam. Take care that the product does not come in direct contact with water, oil, grease, or organic solvents, such as, thinner, etc. DIMENSIONS (Unit: mm in) The CAD data in the dimensions can be downloaded from the SUNX website: GP-X3SE GP-X5SE.669 "2.5 ".98 high frequency coaxial cable, 3 m ft long Coaxial connector for controller connection.669 (6.2) (.244) "2.5 ".98 high frequency coaxial cable, 3 m ft long Coaxial connector for controller connection "3.8 ".15 () (.669) (25.7) (1.12) ("6.4) (".252) "5.4 ".213 () (.669) (25.7) (1.12) ("6.4) (".252) 13

15 GP-X DIMENSIONS (Unit: mm in) The CAD data in the dimensions can be downloaded from the SUNX website: GP-X8S "8 " (6.2) (.244) "2.5 ".98 high frequency coaxial cable, 3 m ft long Coaxial connector for controller connection () (.669) (25.7) (1.12) ("6.4) (".252) GP-X1M "18 " (6.2) (.244) "2.5 ".98 high frequency coaxial cable, 3 m ft long mating coaxial connector () M1 1 (.669) Nut (25.7) (1.12) Toothed lock washer (internal tooth) ("6.4) (".252) GP-X12ML (6.2) (.244) "2.5 ".98 high frequency coaxial cable, 3 m ft long Coaxial connector for controller connection GP-X22KL (6.2) (.244) "2.5 ".98 high frequency coaxial cable, 3 m ft long Coaxial connector for controller connection.669 "21 ".827 "1.1 " () M (.669) (25.7) Nut (1.12) Toothed lock washer (internal tooth) ("6.4) (".252) "22 " (25.7) (1.12) M Nut Toothed lock washer (internal tooth) (".252) "21 ".827 Diameter of toothed lock washer ("6.4) ( ) Comparative output operation indicators (Orange / Green / Orange) 5-digit, dual numerical display (Orange / Green) Timing indicator (Green) (16.7) (.657) Terminal block GP-X series SHIFT key Zero-set key MODE indicator (Orange) MODE key ENTER key UP key DOWN key Connector for RS-232C cable length selection switch Coaxial connector for sensor head connection Panel cut-out dimensions <When BCD output unit / controller communication unit not mounted> When mounted in series A (48 n 2.5).6 A (1.89 n.98).24 <When BCD output unit / controller communication unit mounted> Minimum A Minimum Note: The panel thickness should be 1 to 5 mm.39 to.197 in. Minimum 1.98 Note: The panel thickness should be 1 to 2.5 mm.39 to.98 in. 14

16 DIMENSIONS (Unit: mm in) The CAD data in the dimensions can be downloaded from the SUNX website: GP-XBCD BCD output unit (Optional) Assembly dimensions with controller Connector for controller connection Connector for BCD output Mounting frame Mounting bracket BCD output unit (8.5) (.335) Panel thickness 1 to to.98 (74.6) (2.937) (27.8) (1.94) Connector for BCD output (68) (2.677) (68) (2.677) Cable with connector for BCD output unit GP-XCOM communication unit (optional) Assembly dimensions with controller Connector for communication Connector for controller connection Terminator switch Mounting frame Mounting bracket Communication unit Terminator switch (8.5) (.335) Panel thickness 1 to to.98 (74.6) (2.937) Communication cable Connector for communication (68) (2.677) (68) (2.677) All information is subject to change without prior notice. SUNX Limited Ushiyama-cho, Kasugai-shi, Aichi, , Japan Phone: +81-() FAX: +81-() Overseas Sales Dept. Phone: +81-() FAX: +81-() Printed on 1% recycled paper PRINTED IN JAPAN No. CE-GPX-7 May, 23