DIGITAL LASER SENSOR. User friendly, high precision Digital Laser Sensor SERIES mm in. Easy 1 Installation.

Transcription

1 LS SERIES DIGITAL LASER SENSOR Multi-voltage User friendly, high precision Digital Laser Sensor Conforming to EMC Directive Conforming to FDA regulations Easy Installation We designed types of sensor heads approximately the same size as general purpose photoelectric sensors with identical mounting method. (Long sensing range spot reflective / Long sensing range line reflective / Coaxial retroreflective types) A line width of approx. 00mm (typical) at a 000mm sensing range Long sensing range line reflective type: LS-H Long sensing range spot reflective type: LS-H A spot diameter of approx. mm at a 000mm sensing range Coaxial retroreflective type: LS-H9 Sensing range up to 7000mm Identical shape and mounting General purpose photoelectric sensor CX-00 series Thinnest in the industry. mm 0. in menglish warning label is also attached. Industry standard mounting pitch. mm.000 in

2 . Industry standard mounting pitch The mounting pitch for all types of sensor heads is. mm.000 in, the same industry standard as the CX-00 series general purpose photoelectric sensors. The mounting brackets can be used as is even when replacing general purpose sensors with laser sensors.. Assorted mounting brackets available Because their mounting is compatible with general purpose photoelectric sensors, the mounting brackets for the general purpose photoelectric sensors as well as the universal sensor mounting stand can be used. MS-CX- MS-CX- MS-CX- MS-CX- MS-AJ MS-AJ-A Swivel: 60 rotation 0 mm.906 in approx. Elevation angle: Easy Adjustment Spot size adjustment made simple. The spot size can be adjusted according to the object. Easy adjustment while viewing the spot. Laser emission indicator Operation indicator Spot-size adjuster Highly reliable metal volume built-in allowing multiple revolutions for easy adjustment. Spot-size adjuster (multiple turn). Spot size adjustment possible (LS-H, LS-H) The long sensing range spot reflective type and long sensing range line reflective type have a built-in spot-size adjuster that enables spot size adjustment according to the object for optimal setting.. Easy and accurate adjustments (LS-H, LS-H) A spot-size adjuster is built into the back of the sensor head allowing the user to adjust the sensor easily while viewing the spot. The adjuster is adjustable with a screwdriver to avoid accidents during maintenance or any other time the sensors are handled.

3 Easy Operation Uses MODE NAVI, highly praised in the FX-00 series digital fiber sensors. Along with a dual display screen showing the incident light intensity and threshold value simultaneously, they offer both multi-functionality and superior operability. 0 mm 0.9 in thickness Threshold value setting display Green LED, digits (Max. display: 9999) Current incident light intensity display Red LED, digits (Max. display: 9999) Large jog switch Large MODE key New Advanced sensor with Visible Indicator. Easy setting, dual display Equipped with large -digit digital displays. While checking the current incident light intensity (red display), the optimal threshold value (green display) can be set easily.. Maximum display of 9999 Equipped with large -digit digital displays. While checking the current incident light intensity (red display), the optimal threshold value (green display) can be set easily.. Easy to view guide display Setting items understood at a glance. RUN TEACH L/D RUN Sensing mode. The current incident light intensity is shown in the red digital display. MODE indicators TIMER CUST PRO TIMER Various timer operations settable. RUN TEACH L/D TEACH Teaching mode. TIMER CUST PRO CUST Select functions used most often and store. Refer to p.8. RUN TEACH L/D L/D This mode allows the selection of output operation as either Light-ON or Dark- TIMER CUST PRO PRO Set advanced settings.

4 . switches enabling simple operation Only two switches, the large MODE key and the large jog switch, are required for operation. Pressing the switch selects or cancels the operating mode Moving the switch from side to side allows items to be selected Pressing the switch then confirms the selected setting. Superior maintainability 6. Wiring and space saving Both the sensor head and power supply / output cables use one-touch connectors. The quick-connection cables enable reductions in wiring (connector type). The connections and man-hours for the relay terminal setup can be reduced and valuable space saved. Also, can be connected in a side-by-side with FX- 00 series fiber sensors. Fiber sensor FX-00 series m 6.6 ft (Length can be reduced onsite) m.8 ft, m 6.6 ft and m 6.0 ft cables available

5 Easy High Performance Handy functions used onsite made simple. New recommendation. Accurately sensing the minutest variations (M.G.S. function) When sensing at close range or when the target objects are transparent or minute, adjust the sensor receiving sensitivity to one of levels for the optimal setting. In addition, changing the receiving sensitivity will not effect the response time. Receiving sensitivity: High Receiving sensitivity: Medium Receiving sensitivity:low The sensitivity can be changed without changing the response time.. new modes enabling variegated sensing Hysteresis mode New recommendation Window comparator mode New recommendation NG: Under range OK NG: Over range By adjusting the hysteresis, convexo-concave parts of uneven objects can be cancelled enabling more stable sensing. The sensor judges any object as outside the range established by two set threshold values. independent output modes Differential sensing mode Incident light intensity To left OK To right ON OUT OFF ON OUT OFF Variegated control possible by combining outputs. This is optimal for meander detection. Only the drastic changes of received light are detected for accurate edge sensing of glass or other objects. Optimal for positioning. 6

6 . MODE NAVI customized function Settings can be easily changed by selecting most frequently used response time, M.G.S. function, data bank load, emission halt function and D-CODE values and storing them in the CUSTOM mode. CUSTOM mode Response time M.G.S. function Data bank load Emission halt function D-CODE. Equipped with handy, easy to use functions Emission halt function External teaching function New recommendation Using the emission halt function, the laser beam can be stopped in such instances as when a spot appears within the visual range of an image processor by external input. Interference prevention function Teaching from an external input outside the device can be achieved even for laser sensors installed into the device. Setting conditions viewed at a glance (D-CODE) <Code setting example> L-ON 80!s Hysteresis: standard ON-delay Hysteresis mode The automatic interference prevention function protects against interference between up to sensors. This is effective when the laser sensors are mounted close together with FX-0 fiber sensors. The amplifier setting is shown as an 8-digit code. Handy for remote indications and follow-ups. 7

7 ORDER GUIDE Sensor heads Type Appearance Model No. Conforming standards Sensing range : U-LG : STD : FAST : H-SP Coaxial retroreflective LS-H9 LS-H9F IEC / JIS FDA (Note ) 0. to 7 m 0.8 to.966 ft (Note ) 0. to m 0.8 to 6.0 ft (Note ) 0. to m 0.8 to 9.8 ft (Note ) 0. to m 0.8 to 9.8 ft (Note ) Diffuse reflective Long sensing range spot reflective Long sensing range line reflective LS-H LS-HF LS-H (Note ) LS-HF (Note ) IEC / JIS FDA (Note ) IEC / JIS FDA (Note ) 0 to,000 mm.8 to 9.70 in 0 to 00 mm.8 to 9.68 in 0 to 00 mm.8 to.8 in 0 to 00 mm.8 to.8 in 0 to,000 mm.8 to 9.70 in 0 to 00 mm.8 to 9.68 in 0 to 00 mm.8 to.8 in 0 to 00 mm.8 to.8 in NOTE: Mounting bracket is not supplied with the sensor head. Please select from the range of optional sensor head mounting brackets. Notes: ) This product complies with CFR 00.0 and 00. Laser Notice No. 0, dated July 6, 00, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration). For details, refer to the Laser Notice No. 0. Notes: ) The sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0. m 0.8 ft away. ) LS-H is the set model No. for LS-HM long sensing range spot reflective type sensor head combined with the LS-MR lens attachment for line reflective. Amplifiers Type Appearance Model No. Output Connection method Connector type LS-0 LS-0P NPN open-collector transistor two outputs PNP open-collector transistor two outputs Use quick-connection cable (optional)(note) Cable type LS-0-C LS-0P-C NPN open-collector transistor two outputs PNP open-collector transistor two outputs m 6.6 ft cabtyre cable included Cable outer diameter: ".7 mm "0.6 in Note: Quick-connection cable is not supplied wih the connector type amplifier. Please order it separately. Amplifiers Quick-connection cable is not supplied with the connector type amplifier. Please order it separately. Type Appearance Model No. Description CN-7-C Length: m.8 ft Main cable CN-7-C Length: m 6.6 ft 0. mm -core cabtyre cable, with connector on one end Cable outer diameter: " mm "0.8 in CN-7-C Length: m 6.0 ft CN-7-C Length: m.8 ft Sub cable CN-7-C Length: m 6.6 ft 0. mm -core cabtyre cable, with connector on one end Cable outer diameter: " mm "0.8 in CN-7-C Length: m 6.0 ft 8

8 ORDER GUIDE End Plates End plates are not supplied with the amplifier. Please order separately when the amplifiers are mounted in cascade. Type Model No. Description MS-DIN-E When cascading multiple amplifiers, or when it moves depending on the way it is installed on a DIN rail, these end plates clamp amplifiers into place on both sides. Make sure to use end plates when cascading multiple amplifiers together. Two pcs. per set End Plates RF-0 (Reflector) CN-EP (Connector for amplifier) LS-MR (Lens attachment for line reflective) pcs. per set (Note) Note: One is attached to each sensor head according to standard. Material: Lens... Norbornene resin Mounting part... POM OPTIONS Designation Model No. MS-CX- Foot angled mounting bracket Description Sensor head mounting bracket MS-CX- Two M (length mm 0.7 in) MS-CX- Two M (length mm 0.7 in) Sensor head mounting bracket MS-CX- MS-CX- Foot biangled mounting bracket Flat mounting possible to avoid obstructions caused by the height of the sensor. Back angled mounting bracket Universal sensor mounting stand (Note) MS-CX- MS-AJ MS-AJ MS-AJ-A MS-AJ-A Protective mounting bracket Protects sensors preventing beam axis displacement due to shocks. Horizontal mounting type Vertical mounting type Horizontal mounting type Vertical mounting type Basic assembly Lateral arm assembly MS-CX- Two M (length mm 0.7 in) MS-CX- Two M (length mm 0.7 in) Amplifier mounting bracket Fiber amplifier protective seal Reflector MS-DIN- FX-MB RF-0 Mounting bracket for amplifier 0 sets of communication window seals and connector seal Communication window seal: It prevents malfunction due to transmission signal from another amplifier, as well as, prevents effect on another amplifier. Connector seal: It prevents contact of any metal, etc., with the pins of the quick-connection cable. Compact reflector Sensing range: 0. to 7 m 0.8 to.966 ft Amplifier mounting bracket MS-DIN- Fiber amplifier protective seal FX-MB Communication window seal Connector seal Universal sensor mounting stand MS-AJ MS-AJ-A Swivel: 60 rotation Elevation angle: Height adjustment: 0 mm.906 in approx. Mounting hole for M6 screw With the lateral arm, the sensor can sense from above a 60 Angle adjustment: Swivel: 60 rotation Mounting hole for M6 screw MS-AJ Elevation angle: Swivel: 60 rotation Height adjustment: 0 mm.906 in approx. Mounting hole for M6 screw MS-AJ-A With the lateral arm, the sensor can sense from above a 60 Angle adjustment: Swivel: 60 rotation Mounting hole for M6 screw Reflector RF-0 mm 0.7 in mm 0.7 in mm 0.9 in 9

9 SPECIFICATIONS Sensor heads Item Applicable amplifiers Sensing range Operation indicator Laser emission indicator Spot-size adjuster Ambient temperature Ambient humidity Emitting element Material 0 Model No. U-LG mode STD mode FAST mode H-SP mode Type Coaxial retroreflective LS-H9 Long sensing range spot reflective LS-H Diffuse reflective Long sensing range line reflective LS-H (Note ) LS-H9F LS-HF LS-HF (Note ) LS-00 series 0. to 7 m 0.8 to.966 ft 0 to,000 mm.8 to 9.70 in 0. to m 0.8 to 6.0 ft 0 to 00 mm.8 to 9.68 in 0. to m 0.8 to 9.8 ft 0 to 00 mm.8 to.8 in Orange LED (lights up when the amplifier output is ON) Green LED (lights up during laser emission) Multi-turn adjuster 0 to C (No dew condensation or icing allowed), Storage: 0 to70 C to 8 % RH, Storage: to 8 % RH Red semiconductor laser, Class (IEC / FDA / JIS)(Max. output: mw, peak emission wavelength: 6 nm 0.06 mil) Enclosure: PBT (Polybutylene terephthalate)(mounting part: PEI), Lens cover: Acrylic 0 to,000 mm.8 to 9.70 in 0 to 00 mm.8 to 9.68 in 0 to 00 mm.8 to.8 in Cable 0. mm, single core two parallel shielded cables, m 6.6 ft long (Connector for amplifier attached)(note ) Weight 0 g approx. 0 g approx. 0 g approx. Accessories IEC / JIS standards conforming type FDA standards conforming type (Note ) RF-0 (Reflector): pc. Warning label: pcs. (English pc. and Japanese pc.) [FDA conforming type: pc. (Based on IEC)] Warning label: pcs. (English pc. and Japanese pc.) [FDA conforming type: pc. (Based on IEC)] LS-MR (Lens attachment for line reflective): pc. Warning label: pcs. (English pc. and Japanese pc.) [FDA conforming type: pc. (Based on IEC)] Notes: ) FDA approved devices based on Laser Notice No. 0. ) LS-H is the set model No. for LS-H long distance spot reflective type sensor head combined with the LS-MR lens attachment for line reflective. LS-H is indicated for the actual product. ) Cable cannot be extended. Amplifiers Type NPN output Item PNP output Supply voltage Model No. Power consumption Output (Output, Output ) Connector type Cable type LS-0 LS-0-C LS-0P LS-0P-C to V DC0 % Ripple P-P 0 % or less Normal operation: 90 mw or less (Current consumption 0 ma or less at V supply voltage) ECO mode: 780 mw or less (Current consumption ma or less at V supply voltage) <NPN output type> NPN open-collector transistor Maximum sink current: 00 ma (Note ) Applied voltage: 0 V DC or less (between output and 0 V) Residual voltage:. V or less [at 00 ma (Note ) sink current] <PNP output type> PNP open-collector transistor Maximum source current: 00 ma (Note ) Applied voltage: 0 V DC or less (between output and V) Residual voltage:. V or less [at 00 ma (Note ) source current] Output operation Selectable either Light-ON or Dark-ON, with jog switch Short-circuit protection Incorporated Response time 80!s or less (H-SP), 0!s or less (FAST), 00!s or less (STD), ms or less (U-LG) selectable with jog switch <NPN output type> NPN non-contact input Signal condition High: V to V DC or open, Low: 0 to V DC (sink current 0. ma) External input Input impedance: 0 k approx. Laser emission halt ( <PNP output type> Full-auto teaching / Limit teaching ) PNP non-contact input Signal condition High: V to V DC (source current ma or less), Low: 0 to 0.6 V DC or open Input impedance: 0 k approx. Digital display digit (green) digit (red) LED display Normal mode: -level teaching / Limit teaching / Full auto teaching / Manual adjustment Sensitivity setting Window comparator mode: Teaching (-level, -level, -level) / Manual adjustment Hysteresis mode: Teaching (-level, -level, -level) / Manual adjustment Differential mode: -level settings Fine sensitivity adjustment function Incorporated Timer function Incorporated with variable ON-delay / OFF-delay / ONE SHOT timer, switchable either effective or ineffective. (Timer period: ms to 9,999 ms approx.) Automatic interference prevention function Incorporated [Up to four sets of sensor heads can be mounted close together (However, disabled when in H-SP mode)] Ambient temperature 0 to C (If to 7 units are mounted close together: 0 to0 C, if 8 to 6 units are mounted close together: 0 to C) (No dew condensation or icing allowed), Storage: 0 to70 C Ambient humidity to 8 % RH, Storage: to 8 % RH Material Enclosure: Heat-resistant ABS, Transparent cover: Polycarbonate, Push button switch: Acrylic, Jog switch: ABS Cable (Note ) 0. mm -core cabtyre cable, m 6.6 ft long Cable extension Extension up to total 00 m 8.08 ft is possible with 0. mm, or more, cable. Weight g approx. 6 g approx. Notes: ) 0 ma if to 8 connector type amplifiers are connected in cascade, and ma if 9 to 6 connector type amplifiers are connected in cascade. ) The cable is not supplied as an accessory for connector type LS-0(P). Be sure to use the optional quick-connection cables given below. Main cable (-core): CN-7-C (cable length m.8 ft), CN-7-C (cable length m 6.6 ft), CN-7-C (cable length m 6.0 ft) Sub cable (-core): CN-7-C (cable length m.8 ft), CN-7-C (cable length m 6.6 ft), CN-7-C (cable length m 6.0 ft)

10 SPECIFICATIONS I/O CIRCUIT AND WIRING DIAGRAMS NPN output type I/O circuit diagram Sensor circuit Terminal No. of connector type Color code of cable type / quick-connection cable Tr V Tr D ZD (Brown) V (Note ) (Black) Output (White) Output 00mA max. (Note ) 00mA max. (Note ) ZD (Pink) External input (Note ) (Blue) 0 V (Note ) m to V DC 0 % Internal circuit Users circuit Notes: ) The quick-connection sub cable does not have V (brown) and 0 V (blue). The power is supplied from the connector of the main cable. ) Connector type LS-0(P) does not incorporate the external input. ) 0 ma max. if to 8 connector type amplifiers are connected in cascade, and ma max. if 9 to 6 connector type amplifiers are connected in cascade. m Non-voltage contact or NPN open-collector transistor or High: V tov, or open Low : 0 to V (source current: 0. ma or less) Wiring diagram Brown (Note ) Black White Blue (Note ) Notes: ) The quick-connection sub cable does not have brown lead wire and blue lead wire. The power is supplied from the connector of the main cable. ) The quick-connection cable does not have pink lead wire. Terminal layout of connector type V Output 0 V Terminal No. Output Color code of cable type / quick-connection cable Pink (Note ) mconnector for amplifier (CN-EP) pin position to V DC 0 % Symbols... D: Reverse supply polarity protection diode ZD, ZD: Surge absorption zener diode Tr, Tr : NPN output transistor Terminal No. Connection cable Conductor core wire: Brown Cable color: Gray Shield wire Conductor core wire: Yellow Cable color: Black Shield wire Amplifiers PNP output type I/O circuit diagram Sensor circuit Terminal No. of connector type 0 V Tr Tr D ZD Color code of cable type / quick-connection cable (Brown) V (Note ) (Pink) External input (Note ) m ZD 00 ma max. (Note ) (Black) Output 00 ma max. (Note ) (White) Output (Blue) 0 V (Note ) to V DC 0 % Internal circuit Users circuit Notes: ) The quick-connection sub cable does not have V (brown) and 0 V (blue). The power is supplied from the connector of the main cable. ) Connector type LS-0(P) does not incorporate the external input. ) 0 ma max. if to 8 connector type amplifiers are connected in cascade, and ma max. if 9 to 6 connector type amplifiers are connected in cascade. m Non-voltage contact or PNP open-collector transistor High: V tov or (sink current: ma or less) Low : 0 to0.6 V, or open Wiring diagram Brown (Note ) Pink (Note ) Black White Blue (Note ) to V DC 0 % Notes: ) The quick-connection sub cable does not have brown lead wire and blue lead wire. The power is supplied from the connector of the main cable. ) The quick-connection cable does not have pink lead wire. Terminal layout of connector type V Output 0 V Terminal No. Output Color code of cable type / quick-connection cable mconnector for amplifier (CN-EP) pin position Symbols... D: Reverse supply polarity protection diode ZD, ZD: Surge absorption zener diode Tr, Tr : PNP output transistor Terminal No. Connection cable Conductor core wire: Brown Cable color: Gray Shield wire Conductor core wire: Yellow Cable color: Black Shield wire

11 PRECAUTIONS FOR PROPER USE This catalog is a guide to select a suitable product. Be sure to read the instruction manual attached to the product prior to its use. Sensor head The tightening torque should be 0. Nm or less. This product is not a safety sensor. Its use is not intended or designed to protect life and prevent body injury or property damage from dangerous parts of machinery. It is a normal object detection sensor. M (length mm 0.7 in) screw with washers Sensor head mounting bracket (optional) Cautions for laser beams These products are class laser in compliance with IEC / FDA / JIS standards. To reduce the risk of danger, do not look directly at the laser beam or view it through an optical system. The right appears on labels adhered to the product. Handle this sensor as per the instruction on the labels. [In addition, both English and Japanese warning labels are included. (IEC / JIS conforming! type)] The English warning label based on FDA standards is pasted on the FDA standards conforming type. [In addition, English warning label (based on IEC) is included.] The safety standard IEC 608- specifies the use of laser beam products. Please read it carefully before using the laser beam sensor. Part description (Amplifier) Select indicator (Yellow) Output operation indicator (Orange) Laser emission indicator (Green) LASER ON MODE indicator / RUN (Green) MODE indicator / TEACH (Yellow) OUT L/D Select indicator (Yellow) Output operation indicator (Orange) MODE indicator / L/D ON (Yellow) TIMER CUST PRO MODE indicator / TIMER (Yellow) MODE indicator / CUSTOM (Yellow) PUSH MODE CANCEL MODE key MODE indicator / PRO (Yellow) Jog switch Digital display (Green, Red) When placing the sensor head horizontally or vertically, the reflector must also be positioned horizontally or vertically as shown in Fig. below. If the sensor head is placed horizontally or vertically but the mirror is tilted as shown in Fig. below, the reflection amount will decrease, which may cause unstable detection. Fig. Proper positioning When placing the sensor head horizontally or vertically, the reflector shall also be positioned horizontally or vertically. <Correct> Fig. Improper positioning When placing the reflector tilted even when the sensor head is positioned horizontally or vertically. Spot-size adjuster (Only for LS-H, LS-H) The diffuse reflective type LS-H and LS-H incorporate the spot-size adjuster to adjust the size of spot size. Spot-size adjuster Mounting Amplifier Description Turn the spot-size adjuster clockwise or counterclockwise to adjust the spot size at your desired detecting distance. However, if the adjuster is over turned, it may be damaged. <How to mount the amplifier> ) Fit the rear part of the mounting section of the amplifier on a mm.78 in width DIN rail. ) Press down the rear part of the mounting section of the unit on the mm.78 in width DIN rail and fit the front part of the mounting section to the DIN rail. <How to remove the amplifier> ) Push the amplifier forward. ) Lift up the front part of the amplifier to remove it. Note: Take care that if the front part is lifted without pushing the amplifier forward, the hook on the rear portion of the mounting section is likely to break. <How to mount the sensor head> ) Insert the sensor head connector into the inlet until it clicks. ) Fit the cover to the connector. mm.78 in width DIN rail Cover Sensor head connector <Incorrect> Lens attachment for line reflective type (LS-MR) The lens attachment for line reflective type LS-MR mounted in the long sensing range line reflective type LS-H is removable. When LS-H is used without LS-MR, it will provide the equivalent performance to the long sensing range spot reflective type LS-H. In addition, the optional LS-MR can be attached to LS-H to obtain the performance equivalent to LS-H. Keep the lens from dust, dirt, water, oil, grease, etc. Do not apply any excessive force to LS-MR. Such force may cause damage. Removing method ) Insert a screwdriver into the fixing slot located at the top of sensor head. ) Tilt the screwdriver inserted in Step to remove LS-MR. Mounting method )The size of upper fixing hook of LS-MR is not same as lower fixing hook. After confirming upper and lower fixing hooks, insert LS-MR upper fixing hook into the fixing slot at the top of sensor Fixing slot head and then insert LS-MR lower fixing hook into the fixing slot at the bottom of sensor head. )After mounting, check that LS-MR is properly fixed to the sensor head. Lens attachment for line reflective type LS-MR Fixing hooks Fixing slot

12 DIMENSIONS (Unit: mm in) LS-H9(F) Sensor head LS-H(F) Sensor head Operation indicator (Orange) Operation indicator (Orange) LS-H(F) 0.97 Beamreceiving part 0.8 Beamemitting part Beam emitting / receiving part -M thru-hole threads ". 0.07, single core two parallel shielded cables. (.9 ) M thru-hole threads ". 0.07, single core two parallel shielded cables Sensor head Laser emission indicator (Green),000 ( ) Operation indicator (Orange) Laser emission indicator (Green) , ( ) ( 0.7) CN-EP Spot-size adjuster CN-EP Beamreceiving part LS-0 LS-0P. Beamemitting part -M thru-hole threads ". 0.07, single core two parallel shielded cables Select indicator (Yellow) Select indicator (Yellow) Laser emission indicator (Green) Output operation indicator (Orange) Output operation indicator (Orange) Amplifier Digital display (Green, Red) 7.9 Communication window Laser emission indicator (Green) ,000 ( ) Spot-size adjuster MODE key Jog switch CN-EP Suitable for mm.78 in width DIN rail LS-0-C LS-0P-C Select indicator (Yellow) Select indicator (Yellow) Laser emission indicator (Green) Output operation indicator (Orange) Output operation indicator (Orange) Amplifier Digital display (Green, Red) 0.7 Jog switch MODE key MS-DIN-E End plate (Optional) M (length 8 mm in) pan head screws M square nut Suitable for mm.78 in width DIN rail 7.9 Communication window " cable, m 6.6 ft long.0 "8 0. " Material: Polycarbonate 0.7 RF-0 Reflector (Accessory for LS-H9) RF-0 Reflector (Optional) Material: Acrylic (Reflector) 0.8 -" ABS (Base) 0.9 mounting holes. 0.6 Material: Acrylic (Reflector) ABS (Base) -" mounting holes

13 DIMENSIONS (Unit: mm in) MS-DIN ".8 " ". "0.6 holes. 0.6 Amplifier mounting bracket (Optional) Material: Cold rolled carbon steel (SPCC) (Uni-chrome plated) t t MS-CX- Material: Stainless steel (SUS0) Two M (length mm 0.7 in) t. t 0.07 Sensor head mounting bracket (Optional) R0 R R R ". "0.0 holes MS-CX- Sensor head mounting bracket (Optional) MS-CX- Sensor head mounting bracket (Optional).8 0. t. t Material: Stainless steel (SUS0) Two M (length mm 0.7 in) R R0.98 R0 R ". "0.0 holes R R R R t. t Material: Stainless steel (SUS0) Two M (length mm 0.7 in) MS-CX- Sensor head mounting bracket (Optional) "6 "0 ".7 ".969 Material: Stainless steel (SUS0) Two M (length mm 0.7 in) R7. R R R7. t. R R0.9 t