LS-500 SERIES. Digital Laser Sensor Amplifier-separated. Industry s smallest* Industry s smallest* + Stainless steel (SUS) enclosure
|
|
- Alvin Alexander
- 5 years ago
- Views:
Transcription
1 PHOTO PHOTO MEASURE ITY separated Digital Laser Sensor -separated SERIES Related Information General terms and conditions... F-7 SC-GU... P.985~ About laser beam... P.99~ Industry s smallest* panasonic.net/id/pidsx/global Industry s smallest* + Stainless steel (SUS) enclosure Stainless steel (SUS) body Featuring stainless steel (SUS) enclosure that won t break when bumped during installation or maintenance. One-point M6 installation The LS-H0 features an easy-to-install design. M6 Actual size 0 mm.8 in Body: Stainless steel (SUS) Operation indicator (receiver only) Industry s smallest* + IP67 Waterproof IP67 Featuring waterproof IP67 to allow use in the presence of large amounts of water or dust. Simple positioning Check the optimal receiving location at a glance while watching the red spot on the beam axis adjustment screen. * Smallest amplifier-separated type laser sensor head as of September 0 based on research conducted by our company Sensor selection guide... P.~ Glossary of terms / General precautions... P.55~ / P.58~ Conforming to EMC Directive diagnosis Self-diagnosis Light intensity monitor This product is classified as a Class Laser Product in IEC / JIS standards and in FDA* regulations. Do not look at the laser beam through optical system such as a lens. Interference prevention Conforming to FDA regulations PNP output type available Automatic sensitivity setting * Smallest amplifier-separated type laser sensor head as of September 0 based on research conducted by our company sensing range (In STD amplifier response time mode) ø ø * This product complies with CFR 00.0 and 00. Laser Notice No. 50, dated June, 007, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration). Beam-emitting part ø. ø0.09 Test input ø.5 ø , ø5 ø Unit: mm in Timer LS-H0 * Smallest amplifier-separated type laser sensor head as of September 0 based on research conducted by our company LS-H0 Two-point installation The thru-beam type LS-H0 features the same form factor as the EX-L00 series ultra-compact laser sensor with built-in amplifier, and it can be used as an EX-L00 series with a digital indicator. It also delivers the same bend quality as the EX-L00 series. Installation pitch mm 0.5 in sensing range (In STD amplifier response time mode) The LS-H0 delivers sufficient sensing range for use with 50 mm 7.77 in wafers. LS-H0 EX-L / EX-L Same installation pitch as the EX-L00 series
2 Digital Laser Sensor SERIES APPLICATIONS Lead frame position detection Wafer inclination detection IC float detection PHOTO PHOTO Detection of workpieces through a workbench Detection of gaskets in caps Detection of the top of DVDs, substrate, etc. MEASURE Gasket ITY Industry s smallest* + Thinnest profile * Smallest amplifier-separated type laser sensor head as of September 0 based on research conducted by our company Featuring a 60% smaller design (by volume) than previous coaxial reflective models, our smallest unit is smaller in every dimension at just W8 H D8 mm W0.5 H0.906 D0.709 in (excluding indicators). LS-H0 8mm in mm in 8mm 0.5 in Coaxial design By using a laser with high linearity in a coaxial design, the LS-H0 is able to deliver stable sensing in confined spaces as well as simple installation. Reflective surface Emitting element Reflective photoelectric sensor Laser light Sensing object Reflected light Emitting part Receiving part Coaxial design Receiving lens Receiving element Coaxial principle Receiving part Small, long-range spot Easy-to-see operation indicator The LS-H0 produces a spot with a diameter of mm in at a sensing range of up to 00 mm.8 in (in STD amplifier response time mode). The LS-H0 s operation indicator is visible from all directions. 00 mm.8 in ø mm ø0.079 in separated
3 Digital Laser Sensor SERIES Industry s smallest* + Horizontal symmetry * Smallest amplifier-separated type laser sensor head as of September 0 based on research conducted by our company LS-H90 Horizontal symmetry Featuring a simple system design process thanks to a light source that is placed in the center of the sensor head and a coaxial design. PHOTO PHOTO Industry s smallest* and thinnest design The LS-H90 is even thinner than previous models, measuring just W8 H (excluding indicators) D8 mm W0.5 H0.906 D0.709 in. 8 mm 0.5 in mm 0.57 in Sensing range of 0 mm to m 0.9 in to.8 ft (In STD amplifier response time mode) The LS-H90 supports close-range sensing 0 mm 0.9 in MEASURE ITY * Smallest amplifier-separated type laser sensor head as of September 0 based on research conducted by our company Among industry s fastest response times* 60 μs * -separated type laser sensor amplifiers as of September 0 based on research conducted by our company LS-50 Engineered for maximum compatibility with fiber sensors in every aspect of its design, from form factor to operability, the series delivers an environment that makes it easy to choose a laser sensor. FX-500 series fiber sensor series laser sensor separated Maximum compatibility with fiber sensors The series features the same operation, menu displays, and form factor as the FX-500 series for increased compatibility with fiber sensors. Detection of beam axis misalignment Dual outputs (self-diagnosis output) The series can detect any reduction in incident light intensity, for example due to the accumulation of dirt such as dust, and issue an alarm. Sensing output can be set as self-diagnosis output. When you teach the threshold for sensing output, sensing output is set accordingly, allowing you to shift the threshold by a previously set margin. Stable sensing over the long term The s threshold-tracking function helps maintain stable sensing over the long term and reduce maintenance man-hours. The incident light intensity can be checked and the threshold automatically reset at a user-selected interval to track changes in light intensity due to environmental changes (such as dust, etc.) over extended periods of time. Logic operations The s ability to perform three logic operations (AND, OR, and XOR) on a standalone basis eliminates the need for a dedicated controller, cuts down on wiring, and lowers costs. This functionality can also be combined with the FX-500 series. Data bank Eight sets of amplifier settings can be stored in the unit s built-in memory. The ability to save and load settings reduces workload when changing the setup in a multimodel production environment.
4 Digital Laser Sensor SERIES ORDER GUIDE Sensor heads Thru-beam type Type Cylindrical Square Coaxial reflective type Coaxial retroreflective type Appearance LS-H0 LS-H0 LS-H0 LS-H90 Sensing range : HYPR : U-LG : LONG : STD : ST : H-SP 750 mm 9.58 in 600 mm.6 in 50 mm 7.77 in 00 mm.8 in 00 mm 7.87 in 50 mm in 0.0 to.5 m 0.0 to 8.0 ft 0.0 to m 0.0 to 6.56 ft 0.0 to.5m 0.0 to.9 ft 0.0 to m 0.0 to.8 ft 0.0 to m 0.0 to.8 ft 0.0 to m 0.0 to.8 ft 5 m 6.0 ft cable length type 5 m 6.0 ft cable length types (Standard: m 6.56 ft) are available. When ordering this type, add -C5 at the end of the model number. LS-H0-C5 LS-H0-C5 LS-H0-C5 LS-H90-C5 Package without reflector The LS-H90 is also available without a reflector (RF-0). When ordering this type, add -Y at the end of the model number. ITY LS-H90-Y s Type Appearance Output Connection method Connector type LS-50 LS-50P NPN open-collector transistor two outputs PNP open-collector transistor two outputs Use quick-connection cable (-core) (optional) Cable type With external input LS-50-C LS-50P-C NPN open-collector transistor two outputs PNP open-collector transistor two outputs m 6.56 ft cabtyre cable (6-core) included Cable outer diameter: ø mm ø0.57 in Quick-connection cables Quick-connection cable is not supplied with the connector type amplifier. Please order it separately. Type Appearance Description separated Main cable (-core) CN-7-C CN-7-C Length: Length: m 6.56 ft 0. mm -core cabtyre cable, with connector on one end Cable outer diameter: ø. mm ø0.0 in CN-7-C5 Length: 5 m 6.0 ft Sub cable (-core) CN-7-C CN-7-C CN-7-C5 Length: Length: m 6.56 ft Length: 5 m 6.0 ft 0. mm -core cabtyre cable, with connector on one end Cable outer diameter: ø. mm ø0.0 in Up to 5 sub cables can be connected to main cable. Connector Type Appearance Description Connector for amplifier CN-EP Connector included with sensor head Use for maintenance, for example when another connector is damaged. Five pcs. per set
5 5 Digital Laser Sensor SERIES ORDER GUIDE End plates End plates are not supplied with the amplifier. Please order them separately when the amplifiers are mounted in cascade. separated ITY Appearance Description MS-DIN-E Accessories MS-LS- (Sensor head mounting bracket) For LS-H0 / LS-H90 Foot angled mounting Back angled mounting Material: Stainless steel (SUS0) Two M (length mm 0.7 in) screws with washers [stainless steel (SUS)] are attached. When cascading multiple amplifiers, or when it moves depending on the way it is installed on a DIN rail, these end plates clamp amplifiers into place on both sides. Make sure to use end plates when cascading multiple amplifiers together. Two pcs. per set RF-0 (Reflector) MS-EXL- (Mounting plate for thru-beam type) mm 0.5 in t 0.8 mm t 0.0 in 8. mm 0. in Mounting plate MS-EXL- (Accessory) Material: Stainless steel (SUS) M screw (Purchase separately.) Designation Description Sensor head mounting bracket mounting bracket protective seal Reflector Reflective tape MS-EXL- MS-EXL- MS-EXL-5 MS-DIN- FX-MB RF-0 RF- RF- Sensor head mounting bracket MS-EXL- MS-EXL- Material: Stainless steel (SUS0) Two M (length mm 0.55 in) screws with washers [stainless steel (SUS0)] are attached. Fineadjustment through ± For LS-H0 (square side sensing type) Foot angled mounting bracket For LS-H0 (square side sensing type) Universal sensor mounting bracket For LS-H0 (square side sensing type) Back angled mounting bracket Mounting bracket for amplifier 0 sets of communication window seals and connector seal Communication window seal: It prevents malfunction due to transmission signal from another amplifier, as well as, prevents effect on another amplifier. Connector seal: It prevents contact of any metal, etc., with the pins of the quick-connection cable. For coaxial retroreflective type Compact reflector For coaxial retroreflective type Size: t 0. mm t 0.06 in For coaxial retroreflective type Size: t 0. mm t 0.06 in Rotate through 60 Move vertically 5 mm 0.59 in Material: Die-cast zinc alloy MS-EXL-5 Two M (length mm 0.55 in) screws with washers [stainless steel (SUS)], one M (length 0 mm 0.9 in) hexagon-socket-head bolt [stainless steel (SUS)], and one M hexagon nut [stainless steel (SUS)] are attached. Reflector RF-0 mm 0.57 in Material: Stainless steel (SUS) Two M (length mm 0.55 in) screws with washers [stainless steel (SUS)] are attached. mm 0.7 in mm 0.95 in Sensing range: 0.0 to m 0.0 to.8 ft Sensing range: Same as the RF-0. Reflective tape RF- 0. mm 0.06 in RF- 9. mm 0.6 in 7.8 mm.09 in 5. mm 0.99 in 0. mm 0.06 in 9. mm 0.6 in mounting bracket MS-DIN- protective seal FX-MB Communication window seal Connector seal
6 Digital Laser Sensor SERIES 6 SPECIFICATIONS Sensor heads Type Item Applicable amplifiers Sensing range (Note,) H SP ST STD LONG U LG HYPR Spot size Thru-beam type Coaxial reflective Cylindrical Square type LS-H0 LS-H0 LS-H0 LS-50(P), LS-50(P)-C (Note ) 50 mm in 00 mm 7.87 in 00 mm.8 in 50 mm 7.77 in 600 mm.6 in 750 mm 9.58 in ø5 mm ø0.97 in approx. or less at a distance from the emitter of ø5 mm ø0.97 in approx. or less at a distance from the emitter of ø mm ø0.079 in approx. or less at a distance from the sensor head of 00 mm.8 in Coaxial retroreflective type LS-H to m 0.0 to.8 ft 0.0 to m 0.0 to.8 ft 0.0 to m 0.0 to.8 ft 0.0 to.5 m 0.0 to.9 ft 0.0 to m 0.0 to 6.56 ft 0.0 to.5 m 0.0 to 8.0 ft ø6 mm ø0.6 in approx. or less at a distance from the sensor head of Sensing object Operation indicator Protection Opaque, translucent, or transparent object (Note 5) Orange LED (lights up when the amplifier output is ON) IP0 (IEC) IP67 (IEC) IP0 (IEC) IP0 (IEC) Environmental resistance Ambient temperature Ambient humidity Ambient illuminance Voltage withstandability Insulation resistance Vibration resistance 0 to +55 C + to + F (No dew condensation or icing allowed), Storage: 0 to +70 C to +58 F 5 to 85 % RH, Storage: 5 to 85 % RH Incandescent light:,000 lx at the light-receiving face,000 V AC for one min. between all supply terminals connected together and enclosure 0 MΩ, or more, with 50 V DC megger between all supply terminals connected together and enclosure 0 to 500 Hz frequency,.5 mm in amplitude in X, Y and Z directions for two hours each ITY Emitting element Material Cable Shock resistance Type Peak emission wavelength Laser class Max. output mw Enclosure: Stainless steel (SUS0) Cover: Polycarbonate 00 m/s acceleration (0 G approx.) in X, Y and Z directions for three times each Enclosure: PBT Cover: Acrylic 0.09 mm -core shielded cable, m 6.56 ft long (Note 7) Red semiconductor laser diode 660 nm 0.06 mil Class (IEC / FDA / JIS) (Note 6) mw mw mw Enclosure: PBT, Indicator cover: Polycarbonate Beam-emitting / receiving surfaces: Glass 0.5 mm, -core two parallel shielded cables, m 6.56 ft long (Note 7) Weight Net weight: 50 g approx. Gross weight: 75 g approx. Net weight: 50 g approx. Gross weight: 70 g approx. Net weight: 50 g approx. Gross weight: 80 g approx. Net weight: 50 g approx. Gross weight: 85 g approx. Accessories M6 screw: pcs. Toothed lock washer: pcs. MS-EXL- (Mounting plate): pcs. MS-LS- (Mounting bracket): pc. MS-LS- (Mounting bracket): pc. RF-0 (Refrector): pc. Notes: ) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of + C +7. F. ) When using the thru-beam type LS-H0 or LS-H0, do not set the receiving light sensitivity (gctl) of the applicable series amplifier to level or less. This is because there is a possibility of sensing becoming unstable. ) The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (00 00 mm in) as the object. ) The sensing ranges for coaxial retroreflective type sensors are values for the RF-0 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.0 m 0.0 ft away. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicable series amplifiers, leave an adequate safety margin when setting the threshold. 5) Make sure to confirm detection with an actual sensor before use. 6) This product complies with CFR 00.0 and 00. Laser Notice No. 50, dated June, 007, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration). For details, refer to the Laser Notice No ) Cable cannot be extended. separated
7 7 Digital Laser Sensor SERIES SPECIFICATIONS separated ITY s Item Supply voltage Power consumption Sensing outputs (Sensing output, ) (Note ) Sensing output setting Response time External input (Note ) External input function Timer functions Type NPN output PNP output Output operation Short-circuit protection Sensing output Sensing output (Note ) Monitor current output Sensing output operation indicator Laser emission indicator Output select indicator Digital display Incident light indication range Sensitivity setting Logical operation Connector type Cable type LS-50 LS-50-C LS-50P LS-50P-C +0 to V DC 5 % Ripple P-P 0 % or less Normal operation:,00 mw or less (Current consumption 50 ma or less at V supply voltage,cable type: excluding monitor current output) ECO mode: 980 mw or less (Current consumption 0 ma or less at V supply voltage,cable type: excluding monitor current output) <NPN output type> NPN open-collector transistor Maximum sink current: 50 ma (Note ) Applied voltage: 0 V DC or less (between output and 0 V) Residual voltage: V or less (at max. sink current) <PNP output type> PNP open-collector transistor Maximum source current: 50 ma (Note ) Applied voltage: 0 V DC or less (between output and +V) Residual voltage: V or less (at max. source current) Selectable either Light-ON or Dark-ON Incorporated Normal mode, differential mode, hysteresis mode, window comparator mode, selectable Normal mode, differential mode, hysteresis mode, self-diagnostic output mode, selectable H-SP: 60 μs or less, ST: 50 μs or less, STD: 50 μs or less, LONG: 500 μs or less, U-LG: 5 ms or less, HYPR: ms or less, selectable Output current: Approx. to 0 ma (H-SP, ST, STD: at 0 to,000 indication) Response time: ms or less Zero point: ma ± % F.S. Span: 6 ma ± 5 % F.S. Linearity: ± % F.S. resistance: 0 to 50 Ω <NPN output type> NPN non-contact input Signal condition High: +8 V to +V DC or open, Low: 0 to + V DC (source current 0.5 ma or less) Input impedance: 0 kω approx. Normal mode, differential mode, hysteresis mode, self-diagnostic output mode, answer-back output mode, selectable <PNP output type> PNP non-contact input Signal condition High: + V to +V DC (sink current.0 ma or less), Low: 0 to +0.6 V DC or open Input impedance: 0 kω approx. Laser emission halt / teaching (full-auto teaching, limit teaching, point teaching) / logic operation setting / copy lock / display adjustment / data bank load / data bank save, selectable Orange LED (lights up when sensing output or sensing output is ON) Green LED (lights up during laser emission) Yellow LED (lights up when output is selected) 8-digit 7-segment digital display (-digit green LED + -digit red LED), MODE indicator (Yellow LED): L/D, CUST, PRO H-SP / ST / STD: 0 to,000, LONG / U-LG / HYPR: 0 to 9,999 -level teaching / limit teaching / full auto teaching / manual adjustment Between sensing output and calculation target: Disabled / AND / OR / XOR, selectable Calculation target: Sensing output / adjacent upstream amplifier (sensing output ) / external input, selectable <Sensing output > OFF-delay timer, ON-delay timer, ONE-SHOT timer, ON / OFF-delay timer, ON-delay / ONE-SHOT timer, switchable either effective of ineffective, with variable timer period <Sensing output > OFF-delay timer, ON-delay timer, ONE-SHOT timer, switchable either effective of ineffective, with variable timer period Timer period Interference prevention function Environmental resistance Ambient temperature Ambient humidity Voltage withstandability Insulation resistance Vibration resistance Shock resistance Material Protection Cable Cable extension Weight Accessory Timer range ms : 0.5 ms approx., to 9,999 ms approx., in approx. ms intervals Timer range sec : 0.5 sec. approx., to sec. approx., in approx. sec. intervals Timer range /0 ms : 0.05 ms approx., 0. to ms approx., in approx. 0. ms intervals, Set separately for each output. Incorporated (Note ) 0 to +55 C + to + F (If to 7 units are mounted close together, 0 to +50 C + to + F; if 8 to 6 units (cable type: 8 to units) are mounted close together, 0 to +5 C + to + F) (No dew condensation or icing allowed), Storage: 0 to +70 C to +58 F 5 to 85 % RH, Storage: 5 to 85 % RH,000 V AC for one min. between all supply terminals connected together and enclosure 0 MΩ, or more, with 50 V DC megger between all supply terminals connected together and enclosure 0 to 50 Hz frequency, 0.75 mm 0.00 in (max. 0 G) amplitude in X, Y and Z directions for two hours each 98 m/s acceleration (0 G approx.) in X, Y and Z directions for five times each Enclosure: Polycarbonate, Cover: Polycarbonate, Switch: Polyacetal IP0 (IEC) 0. mm 6-core cabtyre cable, m 6.56 ft long Extension up to total 00 m 8.08 ft is possible with 0. mm, or more, cable. Net weight: 5 g approx., Gross weight: 55 g approx. Net weight: 75 g approx., Gross weight: 0 g approx. FX-MB ( protective seal): set Notes: ) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of + C +7. F. ) 5 ma if 5 or more amplifier are connected in cascade (excluding cable extension). ) Number of units that can be mounted close together: 0 for H-SP; for ST; for STD, LONG, U-LG, or HYPR ) Select either sensing output or external input as the connector type.
8 Digital Laser Sensor SERIES 8 I/O CIRCUIT AND WIRING DIAGRAMS I/O circuit diagrams NPN output type Connector type Terminal No. of connector type Sensor circuit Tr +. V Tr ZD 0 kω D D D ZD D Color code of quick-connection cable (Brown) +V (Note ) (Black) Sensing output + (White) Sensing output / external input * to V DC +0 5 % Cable type +. V 0 kω Sensor circuit Tr Tr ZD D D D D ZD Color code (Brown) +V 6 (Pink) External input + to V DC (Black) Sensing output +0 5 % (White) Sensing output (Blue) 0 V (Blue) 0 V (Note ) (Gray) Monitor output 5 Internal circuit Users circuit Notes: ) The quick-connection sub cable does not have +V (brown) and 0 V (blue). The power is supplied from the connector of the main cable. ) Wiring when sensing output is selected is shown with solid lines. Wiring when external input is selected is shown with broken lines. Symbols... D, D, D, D: Reverse supply polarity protection diode ZD, ZD: Surge absorption zener diode Tr, Tr : NPN output transistor PNP output type Connector type Terminal No. of connector type Color code of quick-connection cable D (Brown) +V (Note ) Sensor circuit 0V Tr Tr 0 kω D * ZD ZD (White) Sensing output / D external input D (Black) Sensing output (Blue) 0 V (Note ) Internal circuit Users circuit Notes: ) The quick-connection sub cable does not have +V (brown) and 0 V (blue). The power is supplied from the connector of the main cable. ) Wiring when sensing output is selected is shown with solid lines. Wiring when external input is selected is shown with broken lines. Wiring diagrams NPN output type Notes: ) The quick-connection sub cable does not have brown lead wire and blue lead wire. The power is supplied from the connector of the main cable. ) The quick-connection cable does not have gray or pink lead wires. Terminal layout of connector type +V Terminal No. Output 0V Output + + Color code of cable type / quick-connection cable Brown (Note ) Pink Black White Blue (Note ) Gray Symbols... D, D, D, D: Reverse supply polarity protection diode ZD, ZD: Surge absorption zener diode Tr, Tr : PNP output transistor to V DC +0 5 % to V DC +0 5 % * Cable type Sensor circuit D Tr Tr 0V Internal circuit Color code (Brown) +V ZD ZD D (Black) Sensing output + D (White) Sensing output 0 kω 6 (Pink) External input D (Blue) 0 V 5 (Gray) Monitor output to V DC +0 5 % Internal circuit Users circuit * Non-voltage contact or PNP open-collector transistor External input or High: + V to +V (sink current: ma or less) Low : 0 to +0.6 V, or open Light emission halts and teaching occurs when at High. PNP output type Users circuit Non-voltage contact or NPN open-collector transistor External input or High: +8 V to +V, or open Low: 0 to + V (source current: 0.5 ma or less) Light emission halts and teaching occurs when at Low. Color code of cable type / quick-connection cable Brown (Note ) Black White + to V DC Pink +0 5 % Blue (Note ) Gray Notes: ) The quick-connection sub cable does not have brown lead wire and blue lead wire. The power is supplied from the connector of the main cable. ) The quick-connection cable does not have gray or pink lead wires. * Connector for amplifier (CN-EP) pin position Terminal No. Connection cable Purple White Shield Shield 5 5 Black 6 6 Pink ITY separated
9 9 PHOTO PHOTO Digital Laser Sensor PRECAUTIONS FOR PROPER Refer to p.58~ for general precautions and p.99~ for information about laser beam. This catalog is a guide to select a suitable product. Be sure to read the instruction manual attached to the product prior to its use. Never use this product as a sensing device for personnel protection. In case of using sensing devices for personnel protection, use products which meet regulations and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country. SERIES These products are Class laser in compliance with IEC, JIS and FDA* regulations. To reduce the risk of danger, do not look directly at the laser beam or view it through an optical system. A label with instructions as found at the below is affixed to the product. Handle this sensor as per the instruction on the labels. MEASURE ITY * This product complies with CFR 00.0 and 00. Laser Notice No. 50, dated June, 007, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration). Safety standards for laser beam products A laser beam can harm human being s eyes, skin, etc., because of its high energy density. IEC has classified laser products according to the degree of hazard and the stipulated safety requirements. LS-H is classified as Class laser. Classification by IEC Class separated <How to mount the amplifier> () Fit the rear part of the mounting section of the amplifier on a 5 mm 5 mm.78 in.78 in width DIN rail. width DIN rail () Press down the rear part of the mounting section of the unit on the 5 mm.78 in width DIN rail and fit the front part of the mounting section to the DIN rail. <How to remove the amplifier> Description Lasers that are safe under reasonably foreseeable conditions of operation, including the use of optical instruments for intrabeam viewing. Safe use of laser products For the purpose of preventing users from suffering injuries by laser products, IEC (Safety of laser products). Kindly check the standards before use. (Refer to About laser beam.) Part description () Sensing output selection indicator (Yellow) Sensing output selection indicator (Yellow) Laser emission indicator (Green) Sensing output operation indicator (Orange) Sensing output operation indicator (Orange) UP key Teaching Threshold value fine adjustment Select setting items Note: B e careful. If the front part is lifted without pushing the amplifier forward, the hook on the rear portion of the mounting section is likely to break. <How to mount the sensor head> () I nsert the sensor head connector into the inlet until it clicks. () Fit the cover to the connector. Connector cover mm 0.7 in MODE indicator: L / D (Yellow) MODE indicator: CUST (Yellow) MODE indicator: PRO (Yellow) Attached toothed lock washer Mounting plate LS-H0 Metal plate MS-EXL- (Accessory) mm 0.5 in In case mounting this product, use a metal plate MS-EXL- (accessory). The tightening torque should be 0.5 N m or less with M screws. t 0.8 mm t 0.0 in 8. mm 0. in M screw (Purchase separately) In case using the dedicated sensor head mounting bracket MS-EXL- (optional) when mounting this product, the metal plate MS-EXL- (accessory) is required depending on the mounting direction. Mount as the diagram below indicates. <Not requiring the metal plate> DOWN key Teaching Threshold value fine adjustment Select setting items MODE key Select Modes Cancel during setting Press down for sec. or more: Switch the sensing output /. M6 The tightening torque should be 0.98 N m or less. LS-H0, LS-H90 Digital display (Green / Red) Sensor head side connector LS-H0 Metal plate Accessory for MS-EXL- SET key Teaching Confirm setting contents Sensor head Classification () Push the amplifier forward. () L ift up the front part of the amplifier to remove it. Cautions for laser beams Mounting <Requiring the metal plate> Sensor head mounting bracket MS-EXL- (Optional) Metal plate MS-EXL- (Accessory) M (length: mm 0.55 in) screw with washer Accessory for MS-EXL- mm Sensor head The tightening torque 0.55 in Metal plate mounting bracket Accessory for should be 0.5 N m or MS-LS- MS-LS- (Optional) less. When placing the sensor head horizontally or 9 mm 0.78 in M (length: mm 0.7 in) screw vertically, the reflector with washer must also be positioned Accessory for MS-LS- horizontally or vertically as shown in Fig. below. If the sensor head is placed horizontally or vertically but the reflector is tilted as shown in Fig. below, the reflection amount will decrease, which may cause unstable detection.
10 Digital Laser Sensor SERIES 50 PRECAUTIONS FOR PROPER Fig. Proper positioning When placing the sensor head horizontally or vertically, the reflector shall also be positioned horizontally or vertically. <Correct> Fig. Improper positioning When placing the reflector tilted even when the sensor head is positioned horizontally or vertically. <Incorrect> DIMENSIONS (Unit mm in) Refer to p.58~ for general precautions and p.99~ for information about laser beam. Wiring Make sure that the power supply is off while wiring. Verify that the supply voltage variation is within the rating. Take care that if a voltage exceeding the rated range is applied, or if an AC power supply is directly connected, the sensor may get burnt or damaged. If power is supplied from a commercial switching regulator, ensure that the frame ground (F.G.) terminal of the power supply is connected to an actual ground. Make sure to use the optional quick-connection cable for the connection of the amplifier [connector type LS-50(P)]. Extension up to total 00 m 8.08 ft is possible with 0. mm, or more, cable. However, in order to reduce noise, make the wiring as short as possible. Set the supply voltage after considering the voltage drop caused by the cable s resistance. When adding units, wiring length must not exceed 50 m 6.0 ft (for 5 to 8 amplifiers) or 0 m ft (for 9 to 6 amplifiers). Others Do not use during the initial transient time (0.5 sec. approx.) after the power supply is switched on. Because the sensitivity is higher in U-LG and HYPER modes than in other modes, it can be more easily affected by extraneous noise. Check the operating environment before use. The CAD data in the dimensions can be downloaded from our website. ITY LS-50 LS-50P LS-50-C LS-50P-C Sensing output selection indicator (Yellow) Sensing output selection indicator (Yellow) Laser emission indicator (Green) Sensing output operation indicator (Orange) Sensing output operation indicator (Orange) Digital display (Red, Green) Setting key MODE key Sensing output selection indicator (Yellow) Sensing output selection indicator (Yellow) Laser emission indicator (Green) Sensing output operation indicator (Orange) Sensing output operation indicator (Orange) Digital display (Red, Green) Setting key MODE key Suitable for 5 mm.78 in width DIN rail Communication window ( ) R. R Communication window Suitable for 5 mm.78 in width DIN rail ( ) R. R ø ø0.57 in 6-core cable, m 6.56 ft long separated CN-7-C CN-7-C CN-7-C5 Main cable (Optional) CN-7-C CN-7-C CN-7-C5 Sub cable (Optional) Length (L) CN-7-C Length (mm in), L Length (L) CN-7-C Length (mm in), L CN-7-C, CN-7-C5 5, ø. ø0.0 cable CN-7-C, CN-7-C5 5, ø. ø0.0 cable
11 5 Digital Laser Sensor SERIES DIMENSIONS (Unit mm in) The CAD data in the dimensions can be downloaded from our website. LS-H0 Sensor head LS-H0 Sensor head Beam axis Note: Not incorporated on the emitter. M Operation indicator (Orange) (Note) ø. ø0.6 mouting holes Note: Not incorporated on the emitter Operation indicator (Orange) (Note) Beam axis ITY LS-H0 LS-H90 Sensor head RF Operation indicator (Orange) -ø. ø Reflector (Accessory for LS-H90 ) -ø. ø0.6 mounting holes MS-DIN-E Material: Polycarbonate RF M (length 8 mm in) pan head screw 0.57 Suitable for 5 mm.78 in width DIN rail M square nut ø. ø0.6. mounting holes 0.6 End plate (Optional) Reflector (Optional) separated Material: Acrylic (Reflector) ABS (Base) RF- RF- Reflective tape (Optional) Material: Acrylic (Reflector) ABS (Base) MS-DIN- mounting bracket (Optional) B A Adhesive tape RF- RF- A B ø.8 ø ø. ø0.6 holes 7.06 Material: Cold rolled carbon steel (SPCC) (Uni-chrome plated) t t 0.09
12 Digital Laser Sensor SERIES 5 DIMENSIONS (Unit mm in) The CAD data in the dimensions can be downloaded from our website. MS-LS- Sensor head mounting bracket (Accessory for LS-H0, LS-H90 ) MS-EXL- Sensor head mounting bracket for LS-H0 (Optional) R.6 t. R0.99 t ø. ø R.6 R0.99 -M R.5 R0.059 t. t Foot angled mounting bracket R R0.5 t. t t.5 t M Assembly dimensions Mounting drawing with the receiver of LS-H Beamreceiving part R R t..0 t 0.07 separated t 0.8 t Material: Stainless steel (SUS0) Note: Screws are not attached. Purchase separately. Assembly dimensions Mounting drawing with the emitter of LS-H0 Note: Without using the mounting plate, beam misalignment may occur. Rear mounting bracket ø.05 ø Beamemitting part R R t. t Material: Stainless steel (SUS0) Two M (length mm 0.55 in) screws with washers [stainless steel (SUS0)] are attached. MS-EXL- Mounting plate (Accessory for LS-H0 ) MS-EXL-5 Sensor head mounting bracket for LS-H0 (Optional) M t.5 t Material: Stainless steel (SUS0) Two M (length mm 0.55 in) screws with washers [stainless steel (SUS0)] are attached. ITY MS-EXL- Universal sensor mounting bracket ø8.5 ø ø8.5 ø0.5 -hexagon nut seats ø. ø0.6 mounting holes Material: Die-cast zinc alloy Two M (length mm 0.55 in) screws with washers, one M (length 0 mm 0.9 in) hexagon socket-head bolt [stainless steel (SUS)], and one M hexagon nut [stainless steel (SUS)] are attached t.5 t ø. ø0.0 thru-hole M Sensor head mounting bracket for LS-H0 (Optional) Assembly dimensions Mounting drawing with the receiver of LS-H Beamreceiving part ø8.5 ø ø. ø0.6 mounting holes (Note) Note: This is the adjustable range of the movable part.
LS-500 SERIES. Digital Laser Sensor Amplifier-separated. Industry s smallest* Industry s smallest* + Stainless steel (SUS) enclosure
0 PHOTO PHOTO MEASURE separated Digital Laser Sensor -separated SERIES Related Information General terms and conditions... F- SC-GU... P.97~ About laser beam... P.59~ Industry s smallest* panasonic.net/id/pidsx/global
More informationDIGITAL LASER SENSOR. User friendly, high precision Digital Laser Sensor SERIES mm in. Easy 1 Installation.
LS SERIES DIGITAL LASER SENSOR Multi-voltage User friendly, high precision Digital Laser Sensor Conforming to EMC Directive Conforming to FDA regulations Easy Installation We designed types of sensor heads
More informationThe World s in Compactness. * Among photoelectric sensors with built-in amplifier, as of June 2015 (survey by our company)
Amplifier Built-in Ultra-minute Photoelectric Sensor EX-Z SERIES Conforming to EMC Directive Recognition No. 1 The World s in Compactness * Among photoelectric sensors with built-in amplifier, as of June
More informationAmplifi er-separated. A line width of approx. 240 mm in (typical) at a 1,000 mm in sensing distance
Digital Laser Sensor SERIES Related Information Amplifi er-separated General terms and conditions... P. Sensor selection guide...p.~ / P.~ Glossary of terms / General precautions... P.98 ~ / P.986 ~ About
More informationOptimum sensing capability for LCD manufacturing
SENSORS FOR Glass Substrate Detection Sensor Amplifier-separated FX-301-F FT-F9 FD-F7 EX-F70/F60 HD-T1 M FD-L3 Reliable detection of glass substrates Its unique optical system enables detection of transparent
More informationNo. 1. The World s in Compactness. Amplifier Built-in Ultra-minute Photoelectric Sensor EX-Z SERIES panasonic.net/id/pidsx/global
Ultra-minute Photoelectric Sensor EX-Z SERIES Conforming to EMC Directive No. 1 The World s in Compactness * Among photoelectric sensors with built-in amplifier, as of June 215 (survey by our company)
More informationGA-311 GH SERIES. Compact Inductive Proximity Sensor Amplifier-separated. High-speed response and excellent workability. IP67G sensor head variations
875 PHOTO PHOTO IT FOW PARTICUAR Compact Inductive Proximity Sensor -separated GA- SERIES General terms and conditions... F-7 Related Information Glossary of terms... P.482~ Sensor selection guide... P.80~
More informationGA-311 GH SERIES. Compact Inductive Proximity Sensor Amplifier-separated. High-speed response and excellent workability
82 PHOTO PHOTO Compact Inductive Proximity Sensor -separated GA- SERIES General terms and conditions... F-7 Related Information Glossary of terms... P.86~ Sensor selection guide... P.757~ General precautions...
More informationSERIES. FX-311 realizes the ultimate in ease-of-operation. Its operation enables easy and full use of latest technology.
FX-11 SERIES FX-11 realizes the ultimate in ease-of-operation. Its operation enables easy and full use of latest technology. Presenting a product which satisfies professionals using volume control. Besides
More informationA line width of approx. 240 mm in (typical) at a 1,000 mm in sensing distance
6 FIBER PHOTO MICRO PHOTO AREA LIGHT CURTAINS PRESSURE / FLOW INDUCTIVE PROXIMITY PARTICULAR USE SENSOR SIMPLE UNITS MEASUREMENT STATIC CONTROL DEVICES ENDOSCOPE MARKERS PLC / TERMINALS HUMAN INTERFACES
More informationpanasonic.net/id/pidsx/global CCD The sensor can be used for various applications with its binary data output with four different sensing modes.
1123 PHOTO PHOTO PARTICUR Type Edge Sensor SERIES Related Information General terms and conditions... F-3 About laser beam... P.1593~ guide... P.1021~ General precautions... P.1595 Conforming to FDA regulations
More informationUltra-compact Laser Collimated Beam Sensor HL-T1 SERIES. Ultra-compact sensor head A high-functionality intelligent controller
1123 Ultra-compact Sensor SERIES Related Information General terms and conditions... F-7 Glossary of terms / General precautions... P.93 / P.01 Sensor selection guide... P.1055~ About laser beam... P.99~
More informationEF-S1 SERIES. Continuously check invisible static electricity in lines. Constantly check static in lines!
1215 PHOTO PHOTO SAFETY USE SERIES Related Information General terms and conditions... F- General precautions... P.1595 guide... P.1155~ MEASUREMENT panasonic.net/id/pidsx/global Continuously check invisible
More informationPM2 SERIES. Convergent Reflective Micro Photoelectric Sensor. Convergent reflection sensing ensures stable detection
3 Micro Photoelectric PM SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.~ Amplifier Built-in selection guide... P.7~ General precautions... P.8~ PHOTO PHOTO Conforming
More informationAdjustable Range Reflective Photoelectric Sensor Amplifier Built-in
36 FIBER PHOTO MICRO PHOTO AREA LIGHT CURTAINS PRESSURE / FLOW INUCTIVE PROXIMITY PARTICULAR USE SENSOR SIMPLE UNITS MEASUREMENT STATIC CONTROL EVICES ENOSCOPE MARKERS Adjustable Range Reflective Photoelectric
More informationPM2 SERIES. Convergent Reflective Micro Photoelectric Sensor. Convergent reflection sensing ensures stable detection
PHOTO PHOTO Micro Photoelectric PM SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.9~ Amplifier Built-in guide... P.393~ General precautions... P.~ Certified MEASURE
More informationNPN open-collector transistor (Judgment output) Current / voltage output (Linear output)
Ultra-compact Sensor SERIES 144 ORDER GUIDE s Type Appearance Model No. Output NPN output HL-AC1 NPN open-collector transistor (Judgment output) Current / voltage output (Linear output) PNP output HL-AC1P
More informationUltra-small U-shaped Micro Photoelectric Sensor. Extremely small size enables space saving!! 12 mm in
1 Ultra-small Micro Photoelectric PM- SERIES Related Information General terms and conditions... F-17 Glossary of terms / General precautions... P.19~ / P.10 Amplifier Built-in selection guide... P.1~
More informationPM-24 SERIES. Ultra-small U-shaped Micro Photoelectric Sensor. Extremely small size enables space saving!! ( ) Equipped with two independent outputs
19 Ultra-small Micro Photoelectric Sensor PM- SERIES Related Information General terms and conditions...p.1 Glossary of terms / General precautions...p.98~ / P.98~ Amplifier Built-in Sensor selection guide...p.11~
More informationSuitable for detecting transparent films or transparent bottles
Ultrasonic Sensor Suitable for detecting transparent films or transparent bottles Reliable detection of transparent objects The sensor reliably detects transparent films or transparent objects. Only 16
More informationUltra-compact Laser Collimated Beam Sensor HL-T1 SERIES. Ultra-compact sensor head A high-functionality intelligent controller
887 Ultra-compact Beam Sensor SERIES Related Information General terms and conditions... P.1 Sensor selection guide...p.11~ / P.833~ Glossary of terms / General precautions... P.1019 / P.1027 About laser
More informationLong sensing range of 500 mm in (HL-T1005A, HL-T1010A) and 2 m ft (HL-T1001A) are available. Adoption of a Class 1 laser
MEASUREMENT SENSORS SERIES Ultra-compact Laser Collimated Beam Sensor LA LA- LM1 LH- HL-C1 The industry s smallest sensor head A high-ality intelligent controller Conforming to EMC Directive The industry
More informationOne step ahead in performance and mounting ease
95 Micro Photoelectric Amplifier Built-in PM-5 SERIES PM-45 SERIES PM-5 SERIES General terms and conditions... F- guide... P.9~ Related Information Glossary of terms / General precautions...p.1549~ / P.155~
More informationNA1-5. Ultra-slim Body 25mm Beam Pitch Area Sensor. Even a Slim Hand Is Detected by the 25mm Pitch Beam Curtain AREA SENSORS.
Ultra-slim Body 2mm Pitch Area Sensor mm Thick: /2 of Conventional Model It fits into a small space, without obstructing normal operation. Clearly Visible Job Indicator Both the emitter and the receiver
More informationColor Detection Fiber Sensor FZ-10 SERIES. Reliable and precise color discrimination. Red, green and blue LEDs. Easy set up
79 Color Sensor FZ- SERIES FIBER PHOTO MICRO PHOTO AREA LIGHT CURTAINS Related Information General terms and conditions... F-17 Glossary of terms... P.1359~ Sensor selection guide...p.31~ General precautions
More informationHead-separated Dual Display Digital Pressure Sensor DPC-L100 SERIES DPH-L100 SERIES. High-precision detection of fluid and air pressure
689 PHOTO PHOTO Dual Display Digital Pressure Sensor DPC-L100 SERIES SERIES General terms and conditions... F-17 Sensor selection guide... P.661~ Related Information Glossary of terms... P.1373~ General
More informationSERIES. Ultra-compact Photoelectric Sensor. Long sensing range
EX- SERIES Ultra-compact Photoelectric Amplifier Built-in Miniature-sized and still mountable with M3 screws Conforming to EMC Directive U Recognition (Excluding m cable length type) Miniaturization by
More informationPM2 SERIES. Convergent Reflective Micro Photoelectric Sensor. Convergent reflection sensing ensures stable detection
3 Micro Photoelectric PM SERIES Related Information General terms and conditions...p. Glossary of terms...p.983~ selection guide...p.~ / P.9~ General precautions...p.98~ Amplifier Built-in PHOTO PHOTO
More informationThe dual display means that the current value and the threshold value, it makes direct setting of threshold value
735 Dual Display Digital Pressure Sensor DPC-L100 SERIES SERIES General terms and conditions... F-3 guide... P.699~ Related Information Glossary of terms... P.1563~ General precautions... P.1566 For Liquid
More informationConnector Built-in U-shaped Micro Photoelectric Sensor. Approximately 60 % of previous model Detachable
44 Connector Built-in Micro Photoelectric SERIES Related Information General terms and conditions... F-1 Glossary of terms... P.1~ selection guide... P.441~ General precautions... P.140 Amplifier Built-in
More informationLong sensing range. 2 m ft. Retroreflective type. 200 mm in. Diffuse reflective type. 160 mm in
PHOTOEECTRIC SENSORS EX- SERIES Ultra-compact Photoelectric PNP output ight intensity type available monitor CX-4 EX-3 Miniature-sized and still mountable with M3 screws EX- EX- Conforming to EMC Directive
More informationUltra-slim Body Picking Sensor NA1-PK5 SERIES NA1-5 SERIES. Even a slim hand is detectable by the 25 mm in pitch beam area sensor
487 FIBER PHOTO MICRO PHOTO AREA IGHT CURTAINS PRESSURE / FOW INDUCTIVE PROXIMITY PARTICUAR USE SENSOR SIMPE UNITS MEASUREMENT STATIC CONTRO DEVICES ENDOSCOPE MARKERS Ultra-slim Body Picking Sensor NA-PK5
More informationUltra-compact Laser Collimated Beam Sensor HL-T1 SERIES. Ultra-compact sensor head A high-functionality intelligent controller
1041 Ultra-compact Sensor SERIES Related Information General terms and conditions... F-17 Glossary of terms / General precautions... P.1397 / P.05 Sensor selection guide... P.963~ About laser beam... P.03~
More informationCylindrical Compact Inductive Proximity Sensor Amplifier Built-in. panasonic.net/id/pidsx/global
8 PHOTO PHOTO MEASURE Cylindrical Compact Inductive Proximity SERIES Related Information General terms and conditions... F- Glossary of terms... P.576~ panasonic.net/id/pidsx/global guide... P.78~ General
More informationGL SERIES. Compact & Low Price Inductive Proximity Sensor. Wide variety, high performance in surprisingly small body at low cost.
811 Compact & ow Price Inductive Proximity Sensor SERIES Related Information General terms and conditions... F-3 Glossary of terms...p.176~ guide... P.781~ General precautions... P.179~ PHOTO PHOTO MEASURE
More informationGX SERIES. Cylindrical Compact Inductive Proximity Sensor Amplifier Built-in. Robust enclosure and flexible cable types are also available
8 Cylindrical Compact Inductive Proximity SERIES Related Information General terms and conditions... F-7 Glossary of terms... P.86~ selection guide... P.757~ General precautions... P.05 PHOTO PHOTO Conforming
More informationSERIES Amplifier Built-in Miniature-size Photoelectric Sensor
PHOTOEECTRIC SENSORS SERIES Amplifier Built-in Miniature-size Photoelectric EQ- Amplifier Built-in Micro-size Type RX -4 EQ- Marked Conforming to EMC Directive (Excluding -DS/DM) RX-S Remarkable Sensing
More informationHigh-speed sampling and high resolution. The new choice for even more variegated data collection and processing.
1105 PHOTO PHOTO High Speed High Accuracy Eddy Current Type Digital Sensor SERIES Related Information General terms and conditions... F-7 Glossary of terms... P.1493 Sensor selection guide... P.1055~ General
More informationPM2 SERIES. Convergent Reflective Micro Photoelectric Sensor. Convergent reflection sensing ensures stable detection. Hardly affected by background
PHOTO PHOTO USE MEASUREMENT STATIC CONTROL Micro Photoelectric SERIES Related Information General terms and conditions... F- Glossary of terms... P.39~ selection guide... P.~ General precautions... P.0
More informationHigh-speed sampling and high resolution. The new choice for even more variegated data collection and processing.
1105 High Speed High Accuracy Eddy Current Type Digital Sensor SERIES Related Information General terms and conditions... F-7 Glossary of terms... P.1493 Sensor selection guide... P.1055~ General precautions...
More informationEX-30SERIES. Threaded Miniature Photoelectric Sensor. The next-generation New Form series. A new alternative to fiber sensors. M4(Reflective type: M6)
EX-3SERIES Threaded Miniature Photoelectric The next-generation New Form series. A new alternative to fiber sensors. Marked Conforming to EMC Directive The EX-3 series have a radically new form which has
More informationPlug-in unit extension block One sensor extension block allows four plug-in units to be added. Power cable for sensors. Snap-connector inputs
1 Sensor Block for SC Quick connection of 16 sensors Set of 16 inputs directly hooked up to PLC Up to 16 sensors can be connected on one main block followed by three extension blocks (or one snapconnector
More informationFrom ultra-thin lead frames to iron sheets... Double feed detection of various metal sheets
1147 Detector SERIES Related Information General terms and conditions... F-7 General precautions...p.151 PHOTO PHOTO MEASURE ITY From ultra-thin lead frames to iron sheets... Double feed detection of various
More informationFrom ultra-thin lead frames to iron sheets... Double feed detection of various metal sheets
1135 Detector SERIES Related Information General terms and conditions... F-3 General precautions...p.1595 PHOTO PHOTO MEASURE From ultra-thin lead frames to iron sheets... Double feed detection of various
More informationHigh-speed sampling and high resolution. The new choice for even more variegated data collection and processing.
1023 PHOTO PHOTO High Speed High Accuracy Eddy Current Type Digital Sensor SERIES Related Information General terms and conditions... F- Glossary of terms... P.1397 Sensor selection guide... P.967~ General
More information187 HG-C SERIES panasonic.net/id/pidsx/global Reliable detection in repeatability 10 μm mil Overwhelmingly stable
187 PHOTO PHOTO MEASURE CMOS Type Micro Laser Distance Sensor SERIES Related Information General terms and conditions... F-3 Glossary of terms / General precautions.p.1549~ / P.1552~ guide... P.169~ About
More informationCompact Inductive Proximity Sensor
SERIES Compact Inductive Proximity Sensor Amplifier Built-in High functionality together with robust housing and flexible cable Miniature is an amplifier built-in inductive proximity sensor having a diameter
More informationConvergent Reflective Micro Photoelectric Sensor
EQ- VF NX PM MS-AJ RT- PX- CY PHOTOELECTRIC SENSORS Mounting Stand Amplifier Built-in SERIES Convergent Reflective Micro Photoelectric Stable detection by convergent reflective mode Stable detection characteristics
More informationU-shaped Type/Convergent Reflective Type. onlinecomponents.com
PHOTOELECTRIC SENSOR SERIES U-shaped Type/Convergent Reflective Type SS-A SU-7/SH VF NX MS-AJ RT- PX- EX CY Amplifier-separated Type Multi-voltage Type Amplifier Built-in Type Mounting Stand Stable Detection
More informationE3S-A. Built-in Amplifier Photoelectric Sensor (Medium Size) Ordering Information. Built-in Amplifier Photoelectric Sensors. Horizontal. 7 m.
Built-in Amplifier (Medium Size) ES-A CSM_ES-A_DS_E Be sure to read Safety Precautions on page 0. Ordering Information Built-in Amplifier s Red light Infrared light Sensing method Appearance Connection
More informationUltra-compact Laser Collimated Beam Sensor HL-T1 SERIES. Ultra-compact sensor head A high-functionality intelligent controller
1041 FIBER PHOTO MICRO PHOTO AREA LIGHT CURTAINS PRESSURE / FLOW INDUCTIVE PROXIMITY PARTICULAR USE SENSOR SIMPLE UNITS MEASUREMENT STATIC CONTROL DEVICES ENDOSCOPE MARKERS PLC / TERMINALS HUMAN INTERFACES
More informationpanasonic.net/id/pidsx/global Up to 16 I/O devices can be connected at once using MIL connectors
987 PHOTO PHOTO Sensor- Connection System SERIES Related Information General terms and conditions... F-3 LS-500 / LS-400 / DPS-400 / GA-311...P.201~ / P.213~ / P.745~ / P.851~ FX-500 / FX-300 / FX-410
More informationDC 3-wire Cylindrical Inductive Proximity Sensor. Long sensing range
INDUCTIVE SERIES DC 3-wire Cylindrical Inductive Proximity Oil resistant Metal embedding possible Amplifier Built-in GX G-6 High performance and environmental resistance at low price G-8/8U GA-/GH GX GX-U/FU
More informationMini Photoelectric Sensor
Mini Photoelectric Sensor High cost-performance Mini Photoelectric Sensor Saves Installation Space and Wiring Effort and Detects Minute Sensing Objects Pin-point beam (1 to 2-mm dia.) makes it possible
More informationDC 3-wire Cylindrical Inductive Proximity Sensor. Long sensing range
INDUCTIVE SERIES DC 3-wire Cylindrical Inductive Proximity Oil resistant Metal embedding possible Amplifier Built-in GX G-6 High performance and environmental resistance at low price GA-/GH GX GX-U/FU
More informationEven a specular background does not affect the sensing performance if the sensor is located 30mm away from it (when directly opposite).
SERIES Convergent Reflective Micro Photoelectric Convergent Reflection Sensing Ensures Stable Detection Marked Conforming to EMC Directive Stable Detection by Convergent Reflective Mode Stable detection
More informationE3S-A. Built-in Amplifier Photoelectric Sensor (Medium Size) Ordering Information. Built-in Amplifier Photoelectric Sensors. Horizontal. 7 m.
Built-in Amplifier (Medium Size) ES-A Be sure to read Safety Precautions on page 0. Ordering Information Built-in Amplifier s Red light Infrared light Sensing method Appearance Connection method Sensing
More informationHead-separated Dual Display Digital Pressure Sensor DPC-100 SERIES DPH-100 SERIES
753 PHOTO PHOTO Dual Display Digital Pressure Sensor DPC-100 SERIES SERIES General terms and conditions... F-3 guide... P.699~ Related Information Glossary of terms... P.1563~ General precautions... P.1566
More informationThe GL-N12 series is recommended to large volume users for cost reduction. Exclusive mounting bracket. Cost saving. Conventional model.
INDUCTIVE SERIES ow Price Square-shaped Inductive Proximity Wide Variety with Total Cost Reduction! G-6 G-18H/18H Marked Conforming to EMC Directive G-8U Exclusive Mounting Bracket is Needless The series
More informationpanasonic.net/id/pidsx/global
73 PHOTO PHOTO Digital Pressure Sensor For Gas SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.1563~ guide... P.699~ General precautions... P.1566 MEASURE Simple &
More informationpanasonic.net/id/pidsx/global Introducing the new standard in CMOS laser displacement sensors
123 PHOTO PHOTO MEASURE Compact Sensor SERIES Related Information General terms and conditions... F-3 Conforming to FDA regulations Introducing the new standard in CMOS laser displacement sensors This
More informationDC 2-wire Cylindrical Inductive Proximity Sensor
SERIES DC -wire Cylindrical Inductive Proximity -wire type available Oil resistant Metal embedding possible Amplifier Built-in GX G-6 High performance & ease of use G-8/8U GA-/GH GX GX-N G-8H/8H G-N Robust
More informationGX-5SU(B) is just 5.4 mm 0.213in in diameter, the smallest in existing DC two-wire sensors. It saves you space.
DC 2-wire Cylindrical Inductive Proximity SERIES Amplifier Built-in High performance & ease of use Robust in tightening The tightening torque has been improved to approx. four times greater than that of
More informationBGS (at min. setting) BGS (at max. setting)
Compact Photoelectric Sensor with Built-in Amplifier EZ-LS CSM_EZ-LS_DS_E_7_ Distance-settable Sensor Unaffected by Workpiece Color and Background Distance-settable triangulation model unaffected by color.
More informationLow Price Rectangular-shaped Inductive Proximity Sensor. The GL-N12 series is recommended to large volume users for cost reduction.
SERIES ow Price Rectangular-shaped Inductive Proximity PNP output Different freq. type available type available mplifier Built-in Wide variety with total cost reduction! G-10/GH GX GX-N GX-U/FU G-18H/18H
More informationLASER. Laser Displacement Transducer. Series LAH-G1. Key-Features:
LASER Laser Displacement Transducer Series LAH-G1 Key-Features: Content: Technical Data...2 Technical Drawing...3 Electrical Connection...4 Order Code...5 ranges up to 300 mm Resolution up to 0.5 μm Protection
More informationSlim Body Analog Fiber Sensor. Analog output type for diverse applications. Slim size. Analog voltage output. Various uses. Saturation indicator
13 ASER Slim Body Analog Sensor selection guide...p.11~ / P.1~ Related Information General terms and conditions... P.1 Glossary of terms... P.93 ~ General precautions... P.9 ~ PHOTOEECTRIC PHOTOEECTRIC
More informationThe World s Smallest TOF Sensor lineup with analog output type
7 New model TOF type with built-in digital panel series The World s Smallest TOF Sensor lineup with analog output type Analog output type and -control-output type The world s smallest TOF sensor Built-in
More informationHigh-speed sampling and high resolution. The new choice for even more variegated data collection and processing.
867 PHOTO PHOTO High Speed High Accuracy Eddy Current Type Digital Sensor SERIES Related Information General terms and conditions... P.1 Glossary of terms... P.1019 Sensor selection guide... P.11~ / P.833~
More informationPrecise sensing in wide area. Sensing area: mm in Minimum sensing object: "0.1 mm "0.004 in Repeatability: 10!m 0.
MEASUREMENT SENSORS SERIES Laser Collimated Beam Sensor -300 HL-T1 LM LH-0 HL-C1 Safe laser beam This laser collimated beam sensor conforms to the Class 1 laser stipulated in IEC Publication 82 and JIS
More informationHL-T1SERIES. Achieving the Ultimate. The industry s smallest sensor head A high-functionality intelligent controller
ULTRA-COMPACT LASER COLLIMATED BEAM SENSOR Class 1 HL-T1SERIES Conforming to EMC Directive Achieving the Ultimate The industry s smallest sensor head A high-ality intelligent controller Advanced technology
More informationHigh-speed sampling and high resolution. The new choice for even more variegated data collection and processing.
1023 FIBER PHOTO MICRO PHOTO AREA LIGHT CURTAINS PRESSURE / FLOW INDUCTIVE PROXIMITY PARTICULAR USE SENSOR SIMPLE UNITS MEASUREMENT STATIC CONTROL DEVICES ENDOSCOPE MARKERS PLC / TERMINALS HUMAN INTERFACES
More informationLong-distance Photoelectric Sensor with Built-in Amplifier. Connection method Sensing distance. --- Retro-reflective. (500 mm) Terminal block ---
Long-distance Photoelectric Sensor with Built-in Amplifier EG CSM_EG_DS_E_ _ Line of Long-distance Photoelectric Sensors for Large Workpieces Includes Retroreflective Models with Sensing Distance of m
More informationNPN output PNP output Cord connection Cord length: 2 m Through-beam 7 m Light-ON. 2 m. (selectable by wiring) Diffuse reflective 0.
Built-in Amplifier Photoelectric Sensor E3V3 Easy-to-use, Low-cost Photoelectric Sensor Incorporating s that can be clearly seen from a distance. A series of models with an M8 metal junction connector
More informationLaser Collimated Beam Sensor
SERIES Laser Collimated Beam Sensor Class 1 Laser Beam Sensor Safe for Your Eyes Marked Conforming to EMC Directive (Excluding LA-C1) Safe Laser Beam This laser collimated beam sensor conforms to the Class
More informationUltra-compact long-distance detection sensor
364 New model TOF long-range type series Ultra-compact long-distance detection sensor Max. sensing distance of 4.5 m *With white paper (9%) The world s smallest TOF sensor Capable of stable detection even
More informationGP-X SERIES Conforming to EMC Directive
High Speed High Accuracy Eddy Current Type Digital Displacement Sensor GP-X SERIES Conforming to EMC Directive 25!s &.2%F.S. High-speed sampling and high resolution. The new choice for even more variegated
More informationThe GL-N12 series is recommended to large volume users for cost reduction. Exclusive mounting bracket. Cost saving. Conventional model
SERIES ow Price Square-shaped Inductive Proximity Wide Variety with Total Cost Reduction! Marked Conforming to EMC Directive Exclusive Mounting Bracket is Needless The G-N series can be reliably fixed
More informationMiddle-GSeries Embedded Amplifier Photo Sensors
Series Embedded Amplifier Photo Sensors IP 6 water resistance Detects mirror-like materials (mirrors, glossy objects) (polarization reflector type) Switch selectable operation mode Sensitivity adjustment
More informationE3X-NA. Adjuster type standard that is the culmination of true ease and simplicity. Super Manual Fiber Amplifier. Features
Super Manual Fiber Amplifier Adjuster type standard that is the culmination of true ease and simplicity Features Self-explanatory LED bar displays of light levels The previous manual type used the stability
More informationZX-L-N. A Host of Smart Functions Inside a Compact Body with a Full Range of Laser Types. Smart Sensors (Laser Type) Features
/ Length (Laser Type) A Host of Functions Inside a Compact Body with a Full Range of Laser Types The world s smallest and lightest, with 8 reflective types and through-beam types available. Light-intensity
More informationHigh Accuracy Eddy Current Type Displacement Sensor. Linearity 0.5 % F.S.
MEASUREMENT SENSORS SERIES High Accuracy Eddy Current Type Displacement Sensor GP-X LD LA LA-300 HL-T1 LM10 LH-0 HL-C1 Accurate measurement of minute displacements Minute displacement of metallic objects
More informationOrdering Information. Smart Sensors (Inductive Displacement Type) ZX Series. Sensors
Smart Sensors (Inductive Displacement Type) ZX Series Smart Sensors that use the eddy current method are now available. Develop new applications with sub-micron sensing technology.. Ordering Information
More informationOil-resistive, Long-range Photoelectric Sensor with Metal Housing
Oil-resistive, Long-range with Metal Housing ES-C Water- and Oil-resistive with Metal Housing Used for Long-range Sensing Satisfies the water- and oil-resistive requirements and safe enough for use in
More informationBoth Compact and Robust. Safety Light Curtain SF4D SERIES. New Concept. GB Conforming to Compact & Robust panasonic.net/id/pidsx/global
Compact & Robust Type4 PLe SIL3 Safety Light Curtain SF4D SERIES Conforming to OSHA / ANSI Certified GB Conforming to 4584 NRTL certified Certified (Excluding SF4D- -01) New Concept Both Compact and Robust
More informationPhotoelectric Sensor with Built-in Amplifier with New Connector Options E3Z
Photoelectric Sensor with Built-in Amplifier with New Connector Options E3Z Compact Sensor Offers Long Sensing Distance and Superior Noise-Immunity D Photo-IC provides long sensing distance: 15 m and 10
More informationE3Z. The New Standard for Compact, Long-range Photoelectric Sensors Conserves Energy and Natural Resources, One Million Sold Yearly
Compact Photoelectric Sensor with Built-in Amplifier EZ The New Standard for Compact, Long-range Photoelectric Sensors Conserves Energy and Natural Resources, One Million Sold Yearly Long sensing distance
More informationpanasonic.net/id/pidsx/global The control category differs depending on the configuration and wiring of the external circuit.
675 Compact Beam Sensor Type 4 SERIES Related Information General terms and conditions... F-3 General precautions... P.1595 PHOTO PHOTO Certified Listing Conforming to OSHA / ANSI MEASURE Category 4 PLe
More informationHead-separated Digital Pressure Sensor For Gas DP5 SERIES DPH SERIES. High speed response of 1/1,000 sec. High speed response 1 ms
72 Digital Sensor For Gas DP5 SERIES SERIES General terms and conditions... F-17 Related Information Glossary of terms... P.17~ Sensor selection guide... P.661~ General precautions... P.145 PHOTO PHOTO
More informationPhotoelectric Sensors E3F2
Photoelectric Sensors E3F2 Threaded Cylindrical Photoelectric Sensors with Built-in Amplifier for Use as an Optical Proximity Switch M18 DIN-sized cylindrical housing Housing materials: plastic, nickel
More informationAluminum-detecting Proximity Sensor (Separate Amplifier Type)
Aluminum-detecting Proximity Sensor (Separate Amplifier Type) ECY Simple Teaching Function for Simple Adjustment. Easy-to-see Excess Gain Level Indicators. Detects aluminum, copper, and other non-ferrous
More informationRP35 SERIES. Thru-beam Mode (Standard Type) Supply Voltage. Sensing Mode. Connection. Part Number. Output Mode. As: RP35 SERIES.
Thru-beam Mode (Standard Type) Sensing Mode Connection Supply Voltage Output Mode Part Number m Cable RP-TMD-EY9C/ D -3V DC RP-TMN-CY9C3U/ D RP-TMP-CY9C3U/ D m -3V DC Standard Range Sensing Distance m
More informationSA1E: Photoelectric Switches. Polarized Retroreflective Type. Through-beam Type
SAE: Photoelectric Simple, compact design for world-wide usage. Key features of the SAE photoelectric sensor include: Four sensing methods Cable types and M8 connector types available NPN output, PNP output,
More informationLight ON 5m. * Light ON. 2.5m (3m) Light ON. (5m)
All voltage photoelectric sensors Built-in amplifier accepts wide supply voltage range. Slim, space-saving construction measures only x x 7.4 mm. s with long life expectancy and high switching capacity
More informationHigh-speed sensing of
FIBER SENSORS High Speed Digital Sensor PNP output type available Timer ight intensity monitor Automatic sensitivity setting High-speed sensing of 9!s http://www.fiber-sensor.com * U 6C-1 compatible, Passed
More informationE3G. Photoelectric switch with built-in amplifier (long distance) in plastic housing. Features
Photoelectric switch with built-in amplifier (long distance) in plastic housing Retroreflective Models Sensing Distance of 10 m, with polarized light to detect shiny objects. stability monitored ba the
More informationCMOS Laser Sensor with Built-in Amplifier ZX0
New Product CMOS Laser Sensor with Built-in Amplifier ZX0 Stable Detection of Level Differences in the Order of 0.1 mm Dependable detection without being influenced by color, material, or surface conditions.
More informationRemote I/O Unit with Connectors for Light Curtain CC-Link Safety System. panasonic.net/id/pidsx/global
715 LIGHT CURTAINS / USE Remote I/O Unit with Connectors for Light Curtain CC-Link System General terms and conditions... F-7 Related Information... P.703~ SF4B... P.565~ General precautions... P.1501
More informationEE-SPX74/84. Ordering Information. Compact Sensor for High-Density Mounting with Easy Snap-In Connector. H Connector features a built-in safety
Compact for High-Density Mounting with Easy Snap-In Connector H Connector features a built-in safety lock for shock and vibration resistance H replacement made simple without rewiring H Cables can be bent
More informationE3S-GS/VS. Both Red-light Models and Greenlight Models to Detect a Wide Variety of Colors. Small Spot/Mark Sensor with Built-in Amplifier
Small Spot/Mark Sensor with Built-in Amplifier CSM_E3S-GS_VS_DS_E_2_1 Both Red-light Models and Greenlight Models to Detect a Wide Variety of Colors Be sure to read Safety Precautions on page. Ordering
More information