Mounting. possibilities. Transmitter optics. 8-pole fem. connector Binder Series 712 (PLC) Connecting cable: cab-las8/sps or cab-las8/sps-w
|
|
|
- Neal White
- 5 years ago
- Views:
Transcription
1 L-LAS Series L-LAS-TB-50 - Laser line sensor, 1 mw, class 2 laser product - Visible laser line (red light 670 nm), 50 mm light curtain - Measuring range typ. 48 mm - Resolution typ. 30 μm - Integrated polarisation filter / interference filter - CCD line detector with 768 pixels - External teach button and potentiometer for tolerance setting - RS232 and Windows user interface - 1 digital input, 2 digital outputs - 1 analog output ( V or mA) - Switching state indication via 3 LEDs (1x green, 2x red) - Multifunctional LED (yellow) Design Product name: L-LAS-TB-50-T (Transmitter) L-LAS-TB-50-R (Receiver) L-LAS-TB-50-R-4/20 (Receiver mA ) L-LAS-TB-50-HD-T (Transmitter HD) L-LAS-TB-50-HD-R (Receiver HD) L-LAS-TB-50-HD-R-4/20 (Receiver HD mA) (incl. Windows software L-LAS-TB-Scope) possibilities Accessories: Traverse L-LAS-TB-L... ( plate, cf. page 6) L-LAS-TB-50-T L-LAS-TB-50-HD-T HD = High Distance version for working distance mm 4/20 = Analog output mA possibilites L-LAS-TB-50-R L-LAS-TB-50-HD-R Transmitter optics possibilities Teach button for set point teaching Potentiometer for tolerance setting LED yellow for adjustment (multifunctional) possibilities Sturdy aluminum housing, anodised in blue LED red (-): Measured value < lower tolerance threshold LED green: Measured value within tolerance window LED red (+): Measured value > upper tolerance threshold 4-pole fem. conn. Binder Series 707 (RS232) cab-las4/pc or cab-las4/pc-w 8-pole fem. connector Binder Series 712 (PLC) cab-las8/sps or cab-las8/sps-w 3-pole fem. connector Binder Series 712 (connection to transmitter) cab-las3-male
2 Technical Data Model L-LAS-TB-50 L-LAS-TB-HD-50 Working distance < 500 mm 500 mm mm Measuring range typ. 48 mm Resolution Laser Optical filter Analog output Digital output (OUT0, OUT1) Digital Voltage input (IN0) supply Sensitivity setting Laser Current power correction consumption typ. 30 μm Semiconductor laser, 670 nm, DC-operation, 1 mw max. opt. power, laser cass 2 acc. to DIN EN The use of these laser sensors therefore requires no additional protective measures. Interference filter, red light filter RG630, polarisation filter optionally with type V L-LAS-TB-...-4/20: Current output mA pnp bright-switching (pnp n.c.)/npn dark-switching (npn n.o.) or pnp dark-switching (pnp n.o.)/npn bright-switching (npn n.c.), adjustable under Windows, 100 ma, short-circuit-proof Input voltage +Ub/0V, with protective circuit +12VDC VDC under Windows via PC Dynamic/static mode adjustable under Windows via PC typ. 200 ma Enclosure rating Electronics: IP54, optics: IP67 Operating Storage Housing temperature range temperature range material Housing dimensions Type of connectors of receiver -10 C C -20 C C Aluminum, anodized in blue Transmitter: LxWxH approx. 125 mm x 105 mm x 30 mm (without connectors) Receiver: LxWxH approx. 75 mm x 105 mm x 30 mm (without connectors) 8-pin female connector type Binder Series 712 (PLC/Power) 4-pin M5 female connector Typ Binder Series 707 (PC/RS232) 3-pin female connector Binder Series 712 (connection to the transmitter) T ype of connector of transmitter 3-pin female connector Binder Series 712 (connection to the receiver) Teach button LED indication Teach button at the housing for set point value teaching LED red (+) : Measured value > upper tolerance threshold LED green : Measured value lies within tolerance window LED red (-) : Measured value < lower tolerance threshold LED yellow: Multifunctional E MC test acc. to IEC Scan frequency Max. switching current max. 300 Hz / 1.2 khz 100 ma, short-circuit-proof I nterface RS232, parameterisable under Windows Connecting cables Connection to PC: cab-las4/pc or cab-las4/pc-w (max. length 15 m) Connection to PLC: cab-las8/sps or cab-las8/sps-w (max. length 25 m) Connection of transmitter and receiver: cab-las3-male (max. length 15 m) O utput polarity Bright-/dark-switching, adjustable under Windows
3 Dimensions L-LAS-TB-50-T L-LAS-TB-50-HD-T (Transmitter) L-LAS-TB-50-R L-LAS-TB-50-HD-R (Receiver) All dimensions in mm
4 Connector Assignment Connection L-LAS-TB-50-R (L-LAS-TB-50-HD-R) to PLC: 8-pole female connector Binder Series 712 Pin: Color: Assignment: 1 white 0V (GND) 2 brown +24VDC 3 green IN0 4 yellow IN1 (not connected) 5 grey OUT0 6 pink OUT1 7 blue 0V (GND) 8 red ANA ( V) in case of -4/20: ANA ( mA) Connection L-LAS-TB-50-R (L-LAS-TB-50-HD-R) to PC: 4-pole female connector Binder Series 707: Pin: Assignment: 1 n.c. 2 0V (GND) 3 RxD 4 TxD cab-las4/pc or cab-las4/pc-w (angle type 90 ) cab-las8/sps or cab-las8/sps-w (angle type 90 ) Picture: cab-las8/sps (length max. 25 m, outer jacket: PUR) Picture: cab-las4/pc (length max. 15 m, outer jacket: PUR) Connection transmitter/receiver: 3-pole female connector Binder Series 712 Pin: Assignment: 1 +5VDC 2 0V (GND) 3 I-CONTROL (0V... +5V) cab-las3-male Picture: cab-las3-male (length max. 15 m, outer jacket: PUR) Laser Warning The laser line sensors of L-LAS Series comply with laser class 2 according to EN The use of these laser transmitters therefore requires no additional protective measures. The laser line sensors of L-LAS Series are supplied with a laser warning label. LASER RADIATION DO NOT STARE INTO THE BEAM CLASS II LASER PRODUCT
5 Parameterization Windows software L-LAS-TB-Scope: The L-LAS-TB sensor can be easily parameterised with the Windows user interface. For this purpose the sensor is connected to the PC with the serial interface cable cab-las4/pc. When parameterisation is finished, the PC can be disconnected again. Windows user interface: In the case of line sensors with 512, 256, or 128 pixels the parameters related to the pixels will be adapted correspondingly! With the help of the L-LAS-TB-Scope software the following settings can be made at the sensor: - Setting of laser power and type of automatic power correction - Polarity of digital outputs - Different evaluation modes - Start of the teach process by software button - Setting of tolerance ranges for monitoring the measured value Furthermore, various numerical and graphical measured quantities can be visualized with the L-LAS-TB-Scope software. For example, the raw data of the CCD line sensor can be displayed graphically and numerically.
6 LED Display LED yellow Voltage indication (multifunctional indication) TEACH/RESET button for set point teaching (input IN1) Potentiometer for tolerance setting LED red (+) Measuring value > upper tolerance threshold LED green Measuring value within tolerance window LED rot (-) Measuring value < lower tolerance threshold Accessories plate for L-LAS-TB-50-T (L-LAS-TB-50-HD-T) and L-LAS-TB-50-R (L-LAS-TB-50-HD-R): (please order separately) Traverse L-LAS-TB-L100 (transmitter/receiver distance 100 mm) Traverse L-LAS-TB-L200 (transmitter/receiver distance 200 mm) Traverse L-LAS-TB-L300 (transmitter/receiver distance 300 mm) Traverse L-LAS-TB-L400 (transmitter/receiver distance 400 mm) Traverse L-LAS-TB-L500 (transmitter/receiver distance 500 mm) L-LAS-TB-50-T (Transmitter) Distance e.g.: 100 mm L-LAS-TB-50-R (Receiver) Traverse L-LAS-TB-L100 ( plate)
L-LAS Series. L-LAS-TB-F-8x1-30/40 L-LAS-TB-F-1x8-30/40. Design. L-LAS Series Laser Line Sensors. Product name:
L-LAS Series L-LAS-TB-F-8x1-30/40 L-LAS-TB-F-1x8-30/40 - Laser line sensor, 1 mw, class 2 laser product - Visible laser line (red light 670 nm), typ. 9.5 mm x 1.5 mm - Measuring range typ. 8 mm - Resolution
L-LAS Series L-LAS-LT-55. Design. L-LAS Series Laser Line Sensors. Product name: L-LAS-LT-55 (incl. Windows - software L-LAS-LT-Scope)
L-LAS Series - Visible laser spot (red), class 2 laser product - Reference distance 55 mm - Measuring range typ. 10 mm, resolution typ. 0,01 mm - Integrated interference filter / red light filter - CCD
Mounting holes. Transmitter optics. 8-pol. fem. conn. Binder Series 712 (connection to PLC) Connecting cable: cab-las4/pc or cab-4/usb or cab-4/eth
L-LAS Series L-LAS-TB-50-CL - Line laser
(threaded M5) 7-pole fem. connector Binder Series 712 (connection Master/Slave) Connecting cable: cab-las7-male not necessary for single system!
L-LAS Series L-LAS-LT-1000-HS (High Speed) - Line laser
L-LAS Series. L-LAS-TB-F-6x1-40/40-CL L-LAS-TB-F-1x6-40/40-CL. Design. L-LAS Series Laser Line Sensors. Product name:
L-LAS Series L-LAS-TB-F-6x1-40/40-CL L-LAS-TB-F-1x6-40/40-CL - Line laser
Sturdy aluminium housing, aodized in black. LED red (-): Measuring value < lower tolerance threshold
L-LAS Series L-LAS-LT-85-RA-CL (Reduced Amplification) - Operates in an angle of total reflection - Suitable für high-glossy objects (e.g. glass) - Line laser
Mounting possibilities (threaded M5)
L-LAS Series L-LAS-LT-55-RA-HS (High Speed) - Operates in an angle of total reflection (distance measurement) - Suitable for high-glossy objects (e.g. glass) - Line laser
L-LAS Series L-LAS-CAM-256 L-LAS-CAM-256-SL L-LAS-CAM-512 L-LAS-CAM-512-SL L-LAS-CAM-1024 L-LAS-CAM-1024-SL. Design. L-LAS-CAM Series Line Cameras
L-LAS Series L-LAS-CAM-256 L-LAS-CAM-256-SL L-LAS-CAM-512 L-LAS-CAM-512-SL L-LAS-CAM-1024 L-LAS-CAM-1024-SL - Various CCD line detectors available - Several high-precise objectives to choose from - Various
4/20: Analog output mA (instead of V) Sturdy aluminium housing, anodized in blue. 7-pole fem. connector.
A-LAS Series A-LAS-CON1 A-LAS-CON1-4/20 - Electronic control unit for control of max. two A-LAS sensors - 100%-check of objects (tolerance band check) - Object positioning and thickness control (in μm
A-LAS Series A-LAS-CON1-FIO A-LAS-CON1-FIO-4/20. Design. A-LAS Series Analog Laser Light Barriers. Accessories: (p. 9-14) Product name:
A-LAS Series A-LAS-CON1-FIO A-LAS-CON1-FIO-4/20 - For control of max. two optical fibers (transmitted light or reflected light) - 100%-check of objects (tolerance band check) - Object positioning and thickness
Data Sheet SI-JET3-CON5 + SI-JET3-FK-200/100-H. 5-pole fem. connector. Binder 712. Connecting cable:
SI-JET Series SI-JET3-CON5 SI-JET3-FK-200/100-H By way of the three red light beams, the SI-JET Spray Jet Monitoring System monitors the density and the symmetry around the opening angle of the spray jet.
SPECTRO Series SPECTRO-2-FIO-(IR2/IR)/(IR3/IR) Design. SPECTRO-2 Series 2-Channel Sensor Systems. Accessories: (p. 8-11) Product name:
SPECTRO Series SPECTRO-2-FIO-(IR2/IR)/(IR3/IR) - Detection of the water content of various materials - Transmitter channel 0: IR-LED (950nm) / Receiver channel 0: IR (900nm... 1700nm) Transmitter channel
LCC Series LCC-130-MA. Design. LCC Series Laser Copy Counters. Product name: Accessories: LCC-130-MA (incl. Windows PC Software SI-LCC-MA-Scope)
LCC Series LCC-130-MA - Insensitive to outside light due to interference filter and modulated laser light - Visible laser spot (red light 670 nm) - Parameterisable via integrated switches and RS232 - RS232
5-pole fem. connector. Binder 712 Connecting cable: cab-las5/pc or cab-las5/usb or SI-RS232/Ethernet-5. 3x potentiometer for
SI-JET Series SI-JET2-CON2 SI-JET2-D20 By way of the three red light beams, the SI-JET Spray Jet Monitoring System monitors the density and the symmetry around the opening angle of the spray jet. With
SPECTRO Series SPECTRO-3-FIO-JR. Design. SPECTRO-3 Series True Color Sensors. Accessories: (cf. p ) Product name:
SPECTRO Series - Big working range: typ. mm... 5 mm (depends on the fiber optics used and attachment optics) - Big assortment of fiber optics available (reflected light or transmitted light operation)
We Bring Light into the Dark. Reliable Differentiation also of Dark Colors.
We Bring Light into the Dark. Reliable Differentiation also of Dark Colors. Color Control and Color Measurement SPECTRO-3-CL / -JR / -ANA Series True Color Sensors SPECTRO-3-CL Series / SPECTRO-3-JR Series
More Precision. optocontrol // Optical precision micrometers
More Precision optocontrol // Optical precision micrometers 8 Optical online micrometer optocontrol 12 Measuring range 28mm Resolution typ. 2µm Repeatibility typ. 4µm Analog Analog output 0... 10VDC Serial
MMS/MFS Series. Laser Line Sensors. Characteristics. MMS/MFS Series Laser Line Sensors. Functional principle of the sensor
MMS/MFS Series Laser Line Sensors MMS/MFS Series Laser Line Sensors Line sensors are applied where precise positioning is required or where the dimensions of an object have to be determined with high accuracy,
SPECTRO Series SPECTRO-3-FIO-SLE. Design. SPECTRO-3 Series True Color Sensors. Accessories: (p ) Product name:
SPECTRO Series - Big working range: typ. 1 mm... 500 mm (depends on the fiber optics used and attachment optics) - Big assortment of fiber optics available (reflected light or transmitted light operation)
SPECTRO Series SPECTRO-3-FIO-SLE. Design. SPECTRO-3 Series True Color Sensors. Accessories: (p ) Product name:
SPECTRO Series - Big working range: typ. 1 mm... 500 mm (depends on the fiber optics used and attachment optics) - Big assortment of fiber optics available (reflected light or transmitted light operation)
Instruction Manual. optocontrol
Instruction Manual -28 Non-contact laser micrometer MICRO-EPSILON Eltrotec GmbH Heinkelstraße 2 73066 Uhingen / Germany Tel. +49 (0) 7161 / 98872-300 Fax +49 (0) 7161 / 98872-303 eltrotec@micro-epsilon.de
Accessories. cab-5/eth-500. Design. Accessories RS232/Ethernet Adapter. Product name: cab-5/eth-500 incl. software SensorFinder
Accessories This network adapter converts standard RS232 signals of the sensor and provides an interface to a LAN network. The RS232 interface can be operated up to 115200 baud. - Auto-MDI-X able, supports
More Precision. colorsensor // Colour Sensors, LED Analyzers
More Precision colorsensor // Colour Sensors, LED Analyzers 30 Colour sensors for special surfaces colorsensor OT-3-LU - Colour sensor for fluorescent objects - 31 colours can be saved - UV illumination
More Precision. colorsensor // Color sensors, LED Analyzers
More Precision colorsensor // Color sensors, LED Analyzers 30 Color sensors for special surfaces colorsensor OT-3-LD - Color sensor for large distances - 31 colors can be saved - Coaxial lens for large
RS485 (S85- -Y13) Display (S85- -Y13) Setting push-buttons (S85- -Y03) Power supply Vdc 24 V +/- 20% PNP NPN Output Push pull
LASER distance sensor for precise measurement up to 20 m with a millimeter of resolution and repeatability through the Time of Flight technique Time of Flight technology Class 2 visible red LASER for an
More Precision. optocontrol // Optical precision micrometers
More Precision optocontrol // Optical precision micrometers 2 Optical micrometers for high precision applications optocontrol High accuracy and measuring rate Resolution from 0.1μm Measurement objects
Optical distance sensors. Dimensioned drawing
Optical distance sensors Dimensioned drawing en 03-2012/11 50110829 120 1400mm 18-30 V DC We reserve the right to make changes DS_ODS96BMV61400S12_en_50110829.fm Reflection-independent distance information
Retro-reflective photoelectric sensors. Dimensioned drawing. Receiver Transmitter Optical axis LED yellow 90 turning connector. Electrical connection
IPRK 8 Retro-reflective photoelectric sensors Dimensioned drawing 0.05 8m A 2 LS A²LS - active suppression of extraneous light Integrated AS-i slave M12 turning connector or cable connection Visible red
More Precision. optocontrol // Optical precision micrometers
More Precision optocontrol // Optical precision micrometers 2 Optical micrometers for high precision applications optocontrol High accuracy and measuring rate Resolution from 0.1μm Measurement objects
PRODUCT INFORMATION. G6 Global Sensor. Beyond the standard Global sensor the economic way to business class
PRODUCT INFORATION G6 Global Sensor Beyond the standard Global sensor the economic way to business class GTB6 Background suppression photoelectric sensor Sensing distance 25 mm Photoelectric proximity
optical sensors through-beam, retro-reflective, dif. reflection sensors 3000 transmitter with test input robust metal housing
design 12 x 12 x 64mm 12 x 12 x 69mm 12 x 12 x 74mm operating distance retro-reflective sensor operating distance diffuse reflection sensor sensing range up to 6.0m up to 4.0m up to 1.2m metal housing
LVX Control Unit. Features:
Date 2013-02-28 Control Unit Features: Most parameters can be defined as required for your interfaces. You decide which information is output and how. Fast cycle times, just a few µs/beam. Maximum beam-count
Basic Series 18 mm Diameter Cylindrical Sensors
Diffuse Mode See pages 384-385 Features: Light on/dark on mode determined by wiring Adjustable sensitivity Sensing Ranges: 2 mm, 5 mm Outputs: NPN, PNP Thru-Beam Mode See pages 387-388 Features: Laser
Sensors. Compact: S60 Series. Compact: S60 Series. Multifunction Optoelectronic Sensors
Multifunction Optoelectronic Long operating distance Sensitivity adjustment Independent NO-NC outputs M12 connection with standard NPN or PNP configuration The S60 sensors have a sensitivity adjustment
Energetic diffuse reflection light scanner. Dimensioned drawing
Energetic diffuse reflection light scanner Dimensioned drawing We reserve the right to make changes 93_c3gb.fm Part No. 51 1168 1-3 V DC 5 17mm 1mm Infrared light Background suppression through appropriate
YM24PAH2ABF. Contrast Sensor. LASER Technical Data. Photoelectronic Sensors. Part Number
Contrast Sensor YM24PAH2ABF Part Number High switching frequency Small light spot Time delay can be activated LASER Technical Data Optical Data Range 150 mm Adjustable Range 60...150 mm Switching Hysteresis
Trigger high-speed, retro-reflective sensors for bottles. Dimensioned drawing
Trigger high-speed, retro-reflective sensors for bottles Dimensioned drawing en 01-2013/11 50121192 10-30 V DC 0 3.6m 5 khz We reserve the right to make changes DS_PRK18BFX_en_50121192.fm Trigger high-speed,
3RG7 Opto-BERO Photoelectric Proximity Switches
K 80 Sensing range 2 m (energetic sensor) Diffuse sensors Modulated infrared light DC or AC/DC M 12 plug or moulded plastic joint IP 67 ON-delay, OFF-delay, pulse shaping Timer 0.01 s to 10 s Enabling
MLV41 Series Miniature Sensors
MLV41 Series Miniature Sensors Diffuse Mode with Background Suppression See pages 5-53 Features: Etended sensing range compared to similar housings High insensitivity to target color Sensing Range: 35
Opto Proximity Switches
SIMATIC PXO0 K form Accessories Operating mode Diffuse Retroreflective Thru-beam Sensor for plastic optical fibers Sensing range cm 10 via potentiometer) 0 via potentiometer) 100 via potentiometer) Depends
Manual Software R-LAS-LT-Scope (LT-Scope) V1.1
Manual Software R-LAS-LT-Scope (LT-Scope) V1.1 (PC software for Microsoft Windows 7, 8, 10) for Laser Reflection Sensor R-LAS-LT-110-HD2 This manual describes the installation process of the software for
Inclination sensors 2-dimensional, measuring range up to ±90
Features Size 52 mm MEMS capacitive measuring principle EN13849 compliant firmware E1 compliant design Interface CANopen, SAE J1939, Analog Connection M12 and cable Protection up to IP 69K Optional GIM500R
Incremental encoders Solid shaft with EURO flange B pulses per revolution
Solid shaft with EURO flange B 0 5000 pulses per revolution EIL580 - EURO flange B - OptoPulse Features Size ø58 mm Precise optical sensing Output signal level TTL or HTL EURO flange B Connection axial,
Incremental encoders Solid shaft with clamping or synchro flange pulses per revolution
GI55, GI56 Features Encoder with solid shaft ø mm or ø6 mm Max. 6000 pulses per revolution Optical sensing method Clamping or synchro flange Industrial standard High rotation speed up to 000 rpm Optional
DFP Series Fiber Photoelectric Amplifiers
DFP Series Fiber electric Amplifiers Part Number Compact rectangular plastic DIN-rail mount- DC models available DIN-rail mounting 12-turn potentiometer sensitivity setting with illuminated scale NPN or
Technical Data Photoelectric Sensors
Series M18 Overview of diffuse reflective and retro reflective sensors Type OT, plastic housing RT 1mm fix. 65578194 65572194 65578182 65572181 RT 3mm var. 65578195 65572195 65578183 65572185 RT 5mm var.
Diffuse reflection light scanner with background suppression. Dimensioned drawing
Specifications and description HRTR 3B Standard Dimensioned drawing We reserve the right to make changes DS_HRTR3B_Standard_en_51734.fm en 13-213/3 51734 1-3 V DC 1 khz A 2 LS 5 4mm 2mm with black-white
Phone: Fax: Web: -
PHOTOELECTRIC miniature sensors S3Z SERIES The high operating distances and costeffective price, makes the S3Z series in the miniature format with dimensions and standard fixing affirmed in the market,
Dimensions. Model Number. Electrical connection emitter. Features. Electrical connection receiver. Product information. Pinout OBE12M-R100-S2EP-IO-V31
OBEM-R00-SEP-IO-V Dimensions. 8.7. 7..9. M (x).. ø... 0 9.9 7. 7. Release date: 08-06-08 :0 Date of issue: 08-06-08 80998_eng.xml Model Number OBEM-R00-SEP-IO-V Thru-beam sensor with -pin, M8 x connector
Electrical connection
Energetic reflection light scanner Dimensioned drawing We reserve the right to make changes DS_ET5_en_50121955.fm en 04-2016/10 50121955 10-30 V DC A 2 LS 500 Hz 1 1000mm Energetic reflection light scanner
Distance and Position Sensors
Distance and Position Sensors SENSORS FOR DISTANCE AND POSITION Using various measuring techniques, HYDAC offers different distance and position sensors for a wide array of mobile and stationary applications.
Manual / Start-Up Guide Spray Control System. L-LAS-Spray-Control Scope V1.0
Manual / Start-Up Guide Spray Control System with L-LAS-Spray-Control Scope V1.0 (PC software for Microsoft Windows 10, Windows 7) Sensor Instruments GmbH - Schlinding 11 - D-94169 Thurmansbang Tel.: +49
APS4 Inductive Proximity Sensors
APS4 Inductive APS4-S-E-D APS4-S-E2-D APS4-M-E-D APS4-M-E2-D Compact x27 mm plastic DC 4 models available Compact polycarbonate housing; comes with mounting plate High-frequency oscillation type DC 3-wire,
Throughbeam photoelectric sensors. Dimensioned drawing. Electrical connection
Specifications and description Leuze electronic LS 97 Throughbeam photoelectric sensors Dimensioned drawing 9m 1-3 V DC! Throughbeam photoelectric sensor with infrared light or visible red light! Small
Optical distance sensors. Dimensioned drawing
Optical distance sensors Dimensioned drawing We reserve the right to make changes DS_ODS10L1_25M8L_en_50129321.fm en 04-2016/08 50129321 100 25000mm Measurement range up to 25000mm on HighGain foil Analog
Linear Position Transducer HLT 1000-R2
Linear Position Transducer HLT 1000-R2 Description: The sensor works on the principle of magnetostriction. This measuring principle determines with high accuracy the position, distance and/or speed and
F3EM Measuring lightcurtain in robust aluminium housing
Measuring lightcurtain in robust aluminium housing F3EM Measuring lightcurtain in robust aluminium housing The F3EM provides easy to install and set up height and profile measurement. The analog output
LASER SENSOR. Series LAS-T5 and LAS-T. Key-Features:
LASER SENSOR Series LAS-T and LAS-T Key-Features: Content: Technical Data...2 Technical Drawing...3 Teach-In - Diagrams...3 Order Code... measurement ranges from 4 to mm linearity up to ±2 µm resolution
More Precision. colorsensor // Color Sensors, LED Analyzers
More Precision colorsensor // Color Sensors, LED Analyzers 32 Sensor systems for LED tests colorcontrol MFA - Multipoint color recognition system - Optionally with up to 495 channels - Color inspection
Laser diffuse reflection light scanner with background suppression. Dimensioned drawing
Laser diffuse reflection light scanner with background suppression Dimensioned drawing We reserve the right to make changes DS_HRTL46B661_en_50113429_01.fm en 02-2014/06 50113429-01 10-30 V DC A 2 LS 50
SENSORS PHOTOELECTRIC S3Z SERIES MINIATURE SENSOR APPLICATIONS HIGHLIGHTS.
PHOTOELECTRIC MINIATURE SENSOR SENSORS S3Z SERIES The high operating distances and costeffective price, makes the S3Z series in the miniature format with dimensions and standard fixing affirmed in the
Dimensions. Electrical connection
VCS0-K Dimensions Connector 89 Connector 8 6 8 7 6 Connector 8 Connector Light guide connection Electrical connection Release date: 0-09- : Date of issue: 0-0- 8_eng.xml M VCS 0 8 09 Model Number VCS0-K
Diffuse reflection light scanner with background suppression. Dimensioned drawing
Specifications and description HRTR 55 Ex Diffuse reflection light scanner with background suppression Dimensioned drawing en 01-2011/05 50113748 1 khz 5 400mm 200mm with black-white error < 10% 10-30
Rugged metal housing provides exceptional performance in demanding applications. Product description
W- Small photoelectric sensors W Rugged metal housing provides exceptional performance in demanding applications Product description The W- family features a complete range of photoelectric sensors that
Absolute encoders - SSI
Features Encoder multiturn / SSI Optical sensing Resolution: singleturn 14 bit, multiturn 12 bit Compact design Cost-efficient mounting High reliability by self-diagnostics Counting direction input Available
IB080QM65VA3 Part Number
Inductive Proximity Switch with increased Switching Distance IB080QM65VA3 Part Number Technical Data Inductive Data Switching Distance 8 mm Correction Factors V2A/CuZn/Al 0,93/0,40/0,36 quasi-flush A/B/C/D
Inclinometer. 4-20mA and RS232
Inclinometer 4-20mA and RS232 Real size Main Features - Two axis digital inclinometer n - Angle measurement range of +/-5, +/-15 and +/-30, Resolution up to 0.001 - Active linearization and temperaturecompensation
OPT2011. High-performance distance sensor. Operating Instructions
OPT2011 High-performance distance sensor Operating Instructions Status: 15/07/2013 2 Table of Contents 1. Use for Intended Purpose 4 2. Safety Precautions 4 2.1. Safety Precautions 4 2.2. Laser/LED warning
SENSORS SR23. Fork Sensors - SR23. High efficiency fork sensor for booklet and multilayer labels detection APPLICATIONS
Fork Sensors - SR23 SR23 High efficiency fork sensor for booklet and multilayer labels detection Multilayer labels detection Up to 0,5 mm of minimum size labels/gap 5 mm slot width 50 mm slot depth Dynamic
EAM 58 B / C - 63 A / D / E BIT PARALLEL - SSI
EAM 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER MAIN FEATURES Industry standard multiturn absolute encoder for factory automation applications. Optical sensor technology
camera sensor ipf opti-check 1070 fully integrated camera system contour-based recognition
ipf opti-check 1070 53 x 99.5 x 38mm camera sensor operating distance variable C-mount for lenses integrated flash controller short set-up times because of up to 255 check programs with up to 32 feature
More Precision. colorsensor // Colour Sensors, LED Analyzers
More Precision colorsensor // Colour Sensors, LED Analyzers 32 Sensor systems for LED testing colorcontrol MFA - Multiple-point colour testing system - Optionally with up to 20 channels - Colour testing
Dimensions. Model Number. Electrical connection. Features. Pinout. Product information. Indicators/operating means OMT300-R201-IEP-IO-V1
Dimensions. 9.9 6 Model Number 6.7 Ref. 6. 5. 5.8 7 7.7.6 ø. 9 50 78.5 Receiver Emitter M x..7 sensor with -pin, M x connector Electrical connection Features Medium design with versatile mounting options
12 m 8 m 6 m 3 m 300 mm 500 mm 70 mm mm Power supply Vdc Vdc
Miniature Sensors - S1 The universal miniature photoelectric sensor Two threaded front mounting holes Two slotted rear mounting holes Anti-tampering sensor (no adjustment) Standard optic functions and
F3ET Lightcurtain in robust aluminium housing
Lightcurtain in robust aluminium housing FET Lightcurtain in robust aluminium housing The FET lightcurtains provide a reliable area monitoring in a robust housing. The M2 -pin connectors and optical synchronisation
4.8 Expansion Module MAC00-FS1/FS4
.8 Expansion Module MAC00-FS/FS MAC00-FS With M connectors MAC00-FS With D sub connectors TT08GB.8. High speed serial RS8 module MAC00-FS and FS Introduction The MAC00-FS and FS are used for high speed
BVS UR E Ordering code: BVS001H
BVS UR-3-101-E Ordering code: BVS001H Vision sensor BVS-E Universal PNP (2x) 1) Teach reference image, 2) Power, 3) Output 1 active, 4) Output 2 active, 5) Connection with PC, 6) Sharpness Characteristic
Inclination sensors 1-dimensional, measuring range
Features Size 52 mm MEMS capacitive measuring principle EN13849 compliant firmware E1 compliant design Interface CANopen, SAE J1939, Analog Connection M12 and cable Protection up to IP 69K Optional GIM500R
Dimensions. Model Number. Electrical connection. Features. Pinout. Indicators/operating means. Product information OQT150-R100-2EP-IO-V31
Dimensions.5 8.7 5.5.5. M (x)..5 7. 5.. 0 5.9 7. 9.95 Reveiver Emitter ø. Model Number Triangulation sensor (SbR) with -pin, M8 x connector Features Miniature design with versatile mounting options Multi
E3S-A. Built-in Amplifier Photoelectric Sensor (Medium Size) Ordering Information. Built-in Amplifier Photoelectric Sensors. Horizontal. 7 m.
Built-in Amplifier (Medium Size) ES-A Be sure to read Safety Precautions on page 0. Ordering Information Built-in Amplifier s Red light Infrared light Sensing method Appearance Connection method Sensing
ADVANCED ultrasonic sensors with 2 switching outputs. Dimensioned drawing
Dimensioned drawing en 2-214/2 5124879 25 4mm 15 13mm 15-3 V DC We reserve the right to make changes DS_HTU418BX3LT4_en_5124879.fm Largely surface-independent function, ideal for the detection of liquids,
! Protected against mutual interference. ! DIN rail mounting
Fibre optic sensor for glass fibre optics SU15-G/32/82f/95 with -pin, M8 connector! Parameterisation via optical communication link (e.g. optional time increments)! Pre-fault indication and output (dynamic
Online data sheet VTE18-4P4240 V18 CYLINDRICAL PHOTOELECTRIC SENSORS
Online data sheet VTE8-P0 V8 VTE8-P0 V8 A B C D E F Illustration may differ Ordering information Type Part no. VTE8-P0 606 Other models and accessories www.sick.com/v8 H I J K L M N O P Q R S T Detailed
Product description. At a glance. performance in a metal housing coating available Precise autocollimation optics. sensors
-2 Laser Small photoelectric sensors High-performance photoelectric sensor family with laser optics Product description At a glance performance in a metal housing coating available Precise autocollimation
SALES NUMBER NUMBER OF BEAMS PROTECTIVE HEIGHT
SECTION 21 182 Safety Light Curtains Type: SLC-F Finger (14mm) FEATURES: Resolution: 14mm Protective height: 160mm to 1040mm Type 4 according to IEC61496-1 and -2 ORDERING INFORMATION: SALES OF BEAMS PROTECTIVE
Electrical connection
IS 230 Foo & Beverage Inuctive switches Dimensione rawing Part No. 501 11727 20mm 10-30 V DC 100 Hz embee Slim an short cylinrical metal housing M30x1.5 V4A / AISI 316L stainless steel housing ECOLAB teste
LASER. Laser Displacement Transducer. Series LAH-G1. Key-Features:
LASER Laser Displacement Transducer Series LAH-G1 Key-Features: Content: Technical Data...2 Technical Drawing...3 Electrical Connection...4 Order Code...5 ranges up to 300 mm Resolution up to 0.5 μm Protection
2 m cable, 4 wires Connection connector. M8 conn., 4-pole Approximate dimensions (mm)
Miniature Sensors - S1 The universal miniature photoelectric sensor Two threaded front mounting holes Two slotted rear mounting holes Anti-tampering sensor (no adjustment) Standard optic functions and
Series 28 Universal Sensors
Series 8 Universal Sensors Diffuse Mode with Background Suppression See pages 548-553 Features: Sharp sensing range cut-off Choice of infrared, visible red and laser light sources Sensing Range: 400 mm,
Assembly Instructions scancontrol 2700/2750 (500)
Assembly Instructions scancontrol 2700/2750 (500) 1. Warnings Connect the power supply and the display-/output device in accordance with the safety regulations for electrical equipment. The power supply
Dimensions. Model Number. Indicators/operating means. Features. Electrical connection. Product information OQT150-R100-2EP-IO-V31-L
Dimensions 21.5 8.7 5.5 11 1.5.2 M (2x).2.5 7.1 25. 1.2 10 15.9 7. 19.95 Reveiver Emitter ø.2 Model Number Triangulation sensor (SbR) with -pin, M8 x 1 connector Features Miniature design with versatile
C5 Series Stainless Steel Photoelectric
C5 Series Stainless Steel Photoelectric Part Number Sensing Range M5 (5 mm) stainless steel - DC 14 models available Diffuse and through-beam styles Long operating distances Compact stainless steel housing
sensors Miniature Sensors - S100 The universal miniature photoelectric sensor
Miniature Sensors - S1 The universal miniature photoelectric sensor Two threaded front mounting holes Two slotted rear mounting holes Anti-tampering sensor (no adjustment) Standard optic functions and
Luminescence Sensors. The bright idea for fluorescent material
P r o d u c t i n f o r m at i o n Luminescence Sensors The bright idea for fluorescent material Technology Luminescence sensors See the invisible Luminescence sensors detect marks that are only visible
3B Series PRODUCT DESCRIPTION
3B Series PRODUCT DESCRIPTION Contents: 3B Series - overview and advantages Special features of Series 3B Sensor selection table Data sheets All rights reserved, especially the rights of copying and translation.
Incremental Encoder with Hollow Shaft
Incremental Encoder Type RI 36-H n miniature industry encoder for high number of pulses n short mounting length n easy mounting procedure n Application e.g.: - Motors - Machine tools - Packaging Machines
Online data sheet VL18-4P3140 V18 CYLINDRICAL PHOTOELECTRIC SENSORS
Online data sheet VL8-P0 V8 VL8-P0 V8 A B C D E F Illustration may differ Ordering information Type Part no. VL8-P0 605 Other models and accessories www.sick.com/v8 H I J K L M N O P Q R S T Detailed technical
SENSORS. TLμ. Contrast Sensors - TLμ. All registration mark detection applications. Teach-in, Remote settings. Red/green or white LED emission
TLμ All registration mark detection applications Teach-in, Remote settings Red/green or white LED emission Various interchangeable lenses and fiber-optic models Metal housing with orientable optics and
1 open / 1 close, 240 V ac / 2 A. < 70 ma < 65 ma ac 20 Hz 13 Hz dc 72 Hz 25 Hz
Description Operation mode and max sensing range: Diffuse proximity: 0-5 m Background suppression: 0- m Compact rectangular housing (x mm) Cable or rotatable plug connection via potentiometer Switch selectable
MiniAmp. Electronics & Software. Miniature Charge Amplifier. Type 5030A...
Electronics & Software MiniAmp Type 5030A... Miniature Charge Amplifier The MiniAmp Type 5030A is a single channel, industrial charge amplifier, which converts the charge signal from piezoelectric sensors