MF-MSMF Series - PTC Resettable Fuses

Transcription

1 *RoHS & AE OMPLIANT Features n ompliant with AE-Q00 Rev-- Stress Test Qualification for Passive omponents in Automotive Applications n 00 % electrically compatible with all previous generations of 8 SMT devices n ompatible with Pb and Pb-free solder reflow profiles n RoHS compliant* and halogen free** n Surface mount packaging for automated assembly n Agency recognition: n Standard 453 mm (8 mils) footprint n Patents pending MF-MSMF Series - PT Resettable Fuses Electrical haracteristics Model Environmental haracteristics V max. Volts I max. Amps I hold I trip Resistance Amperes at 3 Ohms at 3 Amperes at 3 Max. Time To Trip Seconds at 3 Operating Temperature to +85 Passive Aging , 000 hours... ±5 % typical resistance change Humidity Aging , 85 % R.H. 000 hours... ±5 % typical resistance change Thermal Shock to -40, 0 times... ±0 % typical resistance change Solvent Resistance... MIL-STD-0, Method 5... No change Vibration... MIL-STD-883, Method 007.,... No change ondition A Moisture Sensitivity Level (MSL)... Level ESD lassification - HBM... lass 6 Tripped Power Dissipation Watts at 3 Hold Trip R Min. R Max. Typ. MF-MSMF MF-MSMF MF-MSMF MF-MSMF00/ MF-MSMF MF-MSMF MF-MSMF050/30X MF-MSMF050/40X*** MF-MSMF MF-MSMF075/ MF-MSMF MF-MSMF0/ MF-MSMF0/4X MF-MSMF MF-MSMF MF-MSMF50/ MF-MSMF50/4X MF-MSMF MF-MSMF MF-MSMF50/6X*** MF-MSMF ***TUV approval pending. Test Procedures And Requirements For Model MF-MSMF Series Test Test onditions Accept/Reject riteria Visual/Mech... Verify dimensions and materials... Per MF physical description Resistance... In still 3... Rmin R Rmax Time to Trip... At specified current, Vmax, 3... T max. time to trip (seconds) Hold urrent min. at Ihold... No trip Trip ycle Life... Vmax, Imax, 00 cycles... No arcing or burning Trip Endurance... Vmax, 48 hours... No arcing or burning Solderability... ANSI/J-STD % min. coverage UL File Number... E Follow link to Online ertificates Directory, then enter UL File No. E74545, or click here TÜV ertificate Number... R Follow link to other certificates, enter File No. 0573, or click here *RoHS Directive 00/95/E Jan. 7, 003 including annex and RoHS Recast 0/65/EU June 8, 0. **Bourns is using the definition that appears to be the prevalent definition used as the industry standard at this time. The Bourns definition of halogen-free is: Bromine (Br) content: 900 ppm; hlorine (l) content: 900 ppm; Total Br + l content: 500 ppm.

2 Applications n Overcurrent and overtemperature protection of automotive electronics n Hard disk drives n P motherboards n P peripherals n Point-of-sale (POS) equipment n PMIA cards n USB port protection - USB.0, 3.0 & OTG n HDMI.4 Source protection MF-MSMF Series - PT Resettable Fuses Product Dimensions (see next page for outline drawings) Model MF-MSMF00 MF-MSMF04 MF-MSMF00 MF-MSMF00/60 MF-MSMF030 MF-MSMF050 MF-MSMF050/30X MF-MSMF050/40X MF-MSMF075 MF-MSMF075/4 MF-MSMF0 MF-MSMF0/6 MF-MSMF0/4X MF-MSMF5 MF-MSMF50 MF-MSMF50/ MF-MSMF50/4X MF-MSMF60 MF-MSMF00 MF-MSMF50/6X MF-MSMF60 A B D Min. Max. Min. Max. Min. Max. Min (0.7) (0.86) (0.) (0.34) (0.08) (0.043) (0.0) (0.7) (0.86) (0.) (0.34) (0.08) (0.043) (0.0) (0.7) (0.86) (0.) (0.34) (0.08) (0.043) (0.0) (0.7) (0.86) (0.) (0.34) (0.08) (0.043) (0.0) (0.7) (0.86) (0.) (0.34) (0.08) (0.043) (0.0) (0.7) (0.86) (0.) (0.34) (0.0) (0.033) (0.0) (0.7) (0.86) (0.) (0.34) (0.06) (0.033) (0.0) (0.7) (0.86) (0.) (0.34) (0.06) (0.033) (0.0) (0.7) (0.86) (0.) (0.34) (0.0) (0.033) (0.0) (0.7) (0.86) (0.) (0.34) (0.0) (0.033) (0.0) (0.7) (0.86) (0.) (0.34) (0.08) (0.033) (0.0) (0.7) (0.86) (0.) (0.34) (0.08) (0.033) (0.0) (0.7) (0.90) (0.) (0.34) (0.08) (0.063) (0.0) (0.7) (0.86) (0.) (0.34) (0.0) (0.033) (0.0) (0.7) (0.86) (0.) (0.34) (0.0) (0.033) (0.0) (0.7) (0.86) (0.) (0.34) (0.0) (0.033) (0.0) (0.7) (0.90) (0.) (0.34) (0.08) (0.063) (0.0) (0.7) (0.86) (0.) (0.34) (0.0) (0.033) (0.0) (0.7) (0.86) (0.) (0.34) (0.0) (0.033) (0.0) (0.7) (0.90) (0.) (0.34) (0.08) (0.063) (0.0) (0.7) (0.86) (0.) (0.34) (0.09) (0.033) (0.0) Style Packaging: MF-MSMF00 through MF-MSMF030 = 500 pcs. per reel. MF-MSMF050 through MF-MSMF60 = 000 pcs. per reel. MF-MSMF0/4X, MF-MSMF50/4X & MF-MSMF50/6X = 500 pcs. per reel. DIMENSIONS: MM (INHES)

3 MF-MSMF Series - PT Resettable Fuses Product Dimensions (see previous page for dimensions) Style Top and Bottom View A B Side View Recommended Pad Layout.5 ± 0.05 (.059 ±.00).5 ± 0.05 (.059 ±.00) 3. ± 0. (0.6 ±.004) Terminal material: Electroless Ni under immersion Au Termination pad solderability: Standard Au finish: Meets ANSI/J-STD-00D ategory. D.7 ± 0. (.06 ±.004) Recommended Storage: 40 max./70 % RH max. Style Top View Bottom View Side View Recommended Pad Layout A 8 B.95 ± 0.0 (.4 ±.004) D.68 ± 0.05 (.066 ±.00) 3. ± 0.0 (. ±.004) Typical Time to Trip at 3 00 MF-MSMF00 0 MF-MSMF030 MF-MSMF050/40X MF-MSMF50/ MF-MSMF0/4X MF-MSMF00 The Time to Trip curves represent typical performance of a device in a simulated application environment. Actual performance in specific customer applications may differ from these values due to the influence of other variables. Time to Trip (Seconds) 0. MF-MSMF60 MF-MSMF50/6X 0.0 MF-MSMF60 MF-MSMF50 MF-MSMF5 MF-MSMF04 & MF-MSMF00/60 MF-MSMF0 MF-MSMF075 MF-MSMF00 MF-MSMF0/6 MF-MSMF075/ MF-MSMF050 MF-MSMF050/30X Fault urrent (Amps)

4 MF-MSMF Series - PT Resettable Fuses Thermal Derating hart - Ihold (Amps) Ambient Operating Temperature Model MF-MSMF MF-MSMF MF-MSMF MF-MSMF00/ MF-MSMF MF-MSMF MF-MSMF050/30X MF-MSMF050/40X MF-MSMF MF-MSMF075/ MF-MSMF MF-MSMF0/ MF-MSMF0/4X MF-MSMF MF-MSMF MF-MSMF50/ MF-MSMF50/4X MF-MSMF MF-MSMF MF-MSMF50/6X MF-MSMF Solder Reflow Recommendations Temperature T P T L TS MAX. TS MIN. 5 t s PREHEAT RAMP-UP t p t L RITIAL ZONE TL TO TP RAMP-DOWN Notes: MF-MSMF models cannot be wave soldered or hand soldered. Please contact Bourns for soldering recommendations. All temperatures refer to topside of the package, measured on the package body surface. If reflow temperatures exceed the recommended profile, devices may not meet the published specifications. ompatible with Pb and Pb-free solder reflow profiles. Excess solder may cause a short circuit, especially during hand soldering. Please refer to the Multifuse Polymer PT Soldering Recommendation guidelines. Designed for single solder reflow operations. t 5 * TO PEAK 8 MINS. Time How to Order MF - MSMF 075/4 - Multifuse Product Designator Series MSMF = 453 mm (8 mils) Surface Mount omponent Hold urrent, Ihold (0.0 Amps -.60 Amps) Higher Voltage Option Blank = Standard Voltage /, /6, /4, /30, /40, /60 = Specific Voltage Rated X = Multifuse freexpansion Design MF-MSMF Series Packaging Packaged per EIA = Tape and Reel Typical Part Marking Represents total content. Layout may vary. 5Y BI-WEEKLY DATE ODE: WEEKS = Y YEAR ODE: 5 = 005 PART IDENTIFIATION EXAMPLES: MF-MSMF00 = 0 MF-MSMF050 = 50 MF-MSMF075 & 075/4 = 75 MF-MSMF0 & 0/6 = MF-MSMF50 & 50/ = 5 MF-MSMF00 = 0 8 PART IDENTIFIATION EXAMPLES: MF-MSMF00/60 = MF-MSMF050/30X & /40X = 4 MF-MSMF0/4X = 6 MF-MSMF50/4X = 8 MF-MSMF50/6X = BI-WEEKLY DATE ODE: WEEKS 5-6 = MF-MSMF SERIES, REV. AL, /7 PART IDENTIFIATION Users EXAMPLES: should verify actual device performance in their specific applications. The products described herein and this document are subject to specific disclaimers as set forth on the last page of this document, and at

5 Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns products manufactured by or on behalf of Bourns, Inc. and its affiliates (collectively, Bourns ). Unless otherwise expressly indicated in writing, Bourns products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information before placing orders and should verify that such information is current and complete. The characteristics and parameters of a Bourns product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns product in a user application may vary from the data sheet characteristics and parameters due to a combination of the Bourns product with other components in the user s application or due to the environment of the user application itself. Such characteristics and parameters also can and do vary in different applications and actual performance may vary over time. Users should always verify actual performance of the Bourns product in their specific devices and applications, and make their own independent judgments about how much additional test margin to design in to compensate for differences between laboratory and real world conditions. Unless Bourns has explicitly designated an individual Bourns product as meeting the requirements of a particular industry standard (e.g., ISO/TS 6949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any failure of an individual Bourns product to meet requirements of such industry standard or such particular qualification. Users of Bourns products are responsible for ensuring compliance with safety-related requirements and standards applicable to their applications. Bourns products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any Bourns products in such unauthorized applications is at the user s sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as lass III devices and generally equivalent classifications outside of the United States. Bourns standard products that are designed and tested for use in automotive applications will be described on the applicable data sheets as compliant with the applicable AE-Q standard. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns standard products in an automotive application is not recommended, authorized or intended and will be at the user s sole risk. Bourns standard products are not tested to comply with United States Federal Aviation Administration standards generally or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. Bourns standard products that are designed and tested for use in aircraft or space applications will be described on the applicable data sheets as compliant with the RTA DO-60 standard. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns standard product in an aircraft or space application is not recommended, authorized or intended and will be at the user s sole risk. The use and level of testing applicable to Bourns custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns custom products are specially designed. Absent a written agreement between Bourns and the user regarding the use and level of such testing, the provisions above applicable to Bourns standard products shall also apply to such Bourns custom products. Users shall not sell, transfer, export or re-export any Bourns products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use Bourns products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. Further, Bourns products, technology or technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes, and Bourns products may not, without prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to receive U.S. commodities, software, and technical data. To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability arising out of the application or use of any Bourns standard product, (ii) any and all liability, including, without limitation, special, punitive, consequential or incidental damages, and (iii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability. For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional hinese and Simplified hinese bilingual versions are available at: Web Page: PDF: /8/7