BOURNS THYRISTOR SURGE PROTECTOR PRODUCTS SMB (DO-214AA)

Transcription

1 BOURNS THYRISTOR SURGE PROTECTOR PRODUCTS PACKAGE MECHANICAL INFORMATION SMB (DO-214AA) Package Outline Dimensions This surface mount two terminal package consists of a circuit mounted on a lead frame and encapsulated within a plastic compound. The compound is designed to withstand normal soldering temperatures with no deformation and circuit performance characteristics will remain stable when operated in most high humidity conditions. Terminals require no additional cleaning or processing when used in soldered assembly. SMB (DO-214AA) Package ( ) ( ) Index Mark (if needed) ( ) ( ) ( ) ( ) ( ) ( ) DIMENSIONS ARE : MD-SMB-001-a WARNING Cancer and Reproductive Harm - Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at

2 SMB (DO-214AA) Tape Dimensions SMB (DO-214AA) Package Single-Sprocket Tape ( ) ( ) 1.50 DIA. (.059) DIA. MIN ( ) ( ) 0.40 (.016) ( ) ( ) 8.20 (.323) Direction of Feed ( ) Index Mark (if needed) Carrier Tape Embossment 0 MIN. Cover Tape 4.50 (.177) 20 Maximum component rotation Typical component cavity center line DIMENSIONS ARE : Typical component center line NOTES: A. The clearance between the component and the cavity must be within 0.05 mm (.002 in) MIN. to 0.65 mm (.026 in) so that the component cannot rotate more than 20 within the determined cavity. MD-SMB-002-a B. Taped devices are supplied on a reel of the following dimensions:- Reel diameter: 330 mm ±3.0 mm (12.99 in ±.118 in) Reel hub diameter: 75 mm (2.95 in) MIN. Reel axial hole: 13.0 mm ±0.5 mm (.512 in ±.020 in) C devices are on a reel.

3 SMB (DO-214AA) Recommended Printed Wiring Land Pattern Dimensions SMB (DO-214AA) Land Pattern 2.54 (.100) 2.40 (.095) DIMENSIONS ARE: 2.16 (.085) MD-SMB-003-a

4 Bourns Sales Offices Region Phone Fax The Americas: (after 7/17/04) Europe: +41(0) (0) Asia-Pacific: Technical Assistance Region Phone Fax The Americas: (after 7/17/04) Europe: +41(0) (0) Asia-Pacific: Bourns products are available through an extensive network of manufacturer s representatives, agents and distributors. To obtain technical applications assistance, a quotation, or to place an order, contact a Bourns representative in your area. Reliable Electronic Solu tions Bourns is a registered trademark of Bourns, Inc. in the U.S. and other countries. COPYRIGHT 2004, BOURNS, INC. LITHO IN U.S.A. e 04/04/TSP0324

5 Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns products manufactured by or on behalf of Bourns, Inc. and Unless otherwise expressly indicated in writing, Bourns products and data sheets relating thereto are subject to change and complete before placing orders for Bourns products. The characteristics and parameters of a Bourns product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns product with other components the actual performance of the Bourns product as meeting the requirements of a particular industry of Bourns products are responsible for ensuring compliance with safety-related requirements and standards applicable to Bourns on a case-by-case basis, use of any Bourns Bourns standard products that are suitable for use in aircraft standard the user s sole risk. custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns standard products shall also apply to such Bourns custom products. Users shall not sell, transfer, export or re-export any Bourns Bourns products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns products may not, without bilingual versions are available at: Web Page: PDF: