to alter products designs s, dimensions or info to im mprove

Transcription

1 the products quality.headquarters, with express exclusion of any other court. Matrix Evo

2 the products quality.headquarters, with express exclusion of any other court. Matrix Evo Matrix Evo is a key-cutting machine that provides top quality performance and precision in duplicating dimple keys with flat or inclined cuts, laser type keys and Fichet keys. Matrix Evo is designed and produced entirely to CE Mark European Standards. Fichet is a Registered Trademark. The Fichet type key is cut with a special adapter provided with the machine.

3 the products quality.headquarters, with express exclusion of any other court. Innovative design Ergonomic finishes and design, top quality materials. Precise Tolerances to hundredths in cutting results (+/-0,03 mm). Silent Silent* during duplication phases. *reduced noise rating

4 the products quality.headquarters, with express exclusion of any other court. Tilting clamps (0 +/- 45 ) with three seats dedicated to optimum positioning of different types of keys. Interchangeable clamps plates included

5 the products quality.headquarters, with express exclusion of any other court. Matrix Evo Standard Clamps Dimple keys with flat or inclined cuts Cisa, Bricard, Abus Laser type keys HU66 type keys Fichet dimple type keys type keys Cisa, Bricard, Abus and Fichet are Registered Trademarks.

6 the products quality.headquarters, with express exclusion of any other court. Micrometric ring for tracer point regulation.

7 the products quality.headquarters, with express exclusion of any other court. Innovative display key pad to facilitate calibration operations. Electromechanical calibration system. Tool Calibration control ON Lamp switch alignment switch Tracer point-key Cutter-key Blue LED for machine live contact contact

8 the products quality.headquarters, with express exclusion of any other court. Wide safety shield designed to provide the Operator with maximum protection. Rollbar rest for the left hand: provides the Operator with ideal working conditions.

9 the products quality.headquarters, with express exclusion of any other court. Lever for controlling the movements of the vertical axis (Z axis): provided with a push button to activate an incorporated micro-switch for greater Operator safety, speed and efficiency. Lever release and motor ON button

10 the products quality.headquarters, with express exclusion of any other court. LED illumination with manual on-off system. Lamp switch

11 the products quality.headquarters, with express exclusion of any other court. Easily accessed useful area incorporated for accessories and keys.

12 the products quality.headquarters, with express exclusion of any other court. Capacious pull-out unit for accessories, incorporated in the machine in an ideal position. New types of cutters and tracer points made possible by a new alloy composition, innovative design and coloured ID collar to distinguish tracer point and cutter *. * Patent pending

13 Technical Data Power supply 230V - 50Hz: 0,75 Amp Watt 100V/120V - 50/60Hz: 2,3 Amp Watt 470 mm m (18,52 ) Cutter motor Cutters Tool speed Movements Clamps Runs Illumination Dimensions Mass Single phase 1 speed 230V 50/60 Hz - 100V/120V 50/60Hz Super speed steel 6000 rpm (super speed steel) On 3 axis by ball guides Tilting with interchangeable plates X axis: 40 mm (1.57 ) Y axis: 50 mm (1.97 ) Z axis: 30 mm (1.18 ) LED lamp Width: 310 mm (12.20 ) (with max. lever encumbrance: 400 mm ) Depth: 400 mm (15.75 ) Height: 470 mm (18.50 ) 24,6 Kg (54.23 lbs) Cop pyright by Silca S.p.A A All Rights Reserved In compliance with current regulations relating to industrial property, we hereby state that the trade-marks or trade names mentioned in this document are the exclusive property of authorized manufacturers of locks and users. Said trade-marks or trade names are nominated only for the purposes of information so that any lock for which our keys are made can be rapidly identified. This document is reserved exclusively for professional key cutters who use Silca products. / All information and illustrations in this document are for guidance only. Silca reserves the right, dimensions or info to i the products quality. The contents of this document are fully protected by Copyright and may not be copied or reproduced in any form, without written permission from Silca S.p.A. Any controversy shall be settled by the Courts of Justice where the company has its headquarters, with express exclusion of any other court.