EKS 42 Mega / EKS 50 Mega

Transcription

1 EKS 4 Mega / EKS 5 Mega Access Control System Description The system consists of a central unit, the EKS Mega, and several MegaBeans which are connected to it within a fixture, COPPanel, or similar. It manages up to 55 transponder identifiers. For each authorized transponder any combination of connected control devices (MegaBean button) can be activated. EKS 4 Mega central unit Optionally the reading procedure of a transponder can be signalised optically with the EKS Mega. Acoustic signals confirm all actions, especially operation of controlling devices if no valid transponder was detected. Assembly is possible both during fixture production as well as retrofit for existing installations of any manufacturer, as long as the electrical requirements (voltage range, current consumption of ) are met. The application profile can be changed easily and quickly on site. It is also possible to delete lost transponders from the system without any additional hardware. EKS 5 Mega central unit permissible output current of the system V... 3 V DC smoothed max. A Temperature range 5 C... 5 C max. 55 transponder identifiers MegaBean switching module 5. Electronic Key Switches EKS 4 / EKS 5 I. 8. I. 8.7

2 EKS 4 Mega / EKS 5 Mega Transponder ISOCard Transponders with key function are available in four variants: ISOCard KeyCard key ring pendant KeyTag key ring pendant BlueTag key ring pendant StrongTag All four variants have identical functions. KeyTag Every transponder (electronic key) is a unique specimen with a nonrecurring and unchangeable identifier. Particular transponders can be deleted from the memory of the EKS Mega. Additional transponders can be stored into the EKS Mega on site. The EKS Mega can memorize up to 55 different transponder identifiers. BlueTag StrongTag As a rule, the EKS Mega is being delivered ready for installation, i. e. the enclosed transponders are stored in the memory of the EKS Mega and the desired configuration is set. By means of the optionally available special function cards ProgrammingCard ResetCard DeleteCard the configuration of the EKS Mega can be modified. Customized designs available on request. 5.3

3 EKS 4 Mega Style MT 8 Q, Style MT 8 R Central unit Fixing welding studs M3 x Faceplate thickness mm... 3 mm Connection technology.1 mm² AWG mm² ribbon cable EKS 4 Mega Style MT 8 Q Operating current Recall light / permanent illumination U = V... 3 V DC smoothed 4 V max. ma with maximum permanent illumination 4 V max. 8 ma switching voltage = max. V DC / 5 V AC switching capacity = max. 3 W LED Please order fixing accessories separately. EKS 4 Mega Style MT 8 R 4 75 Temperature range 5 C... 5 C and permanent illumination can be individually set at three different luminosity levels: dark, medium, bright max. 55 transponder identifiers Transponder technology type read only 4 Bit, 4 Bit Data frequency 15 khz possible identifiers 1.1 x 1¹² detection time approx.. s welding stud M3 x welding stud M3 x Cutout C1 1 1 relay C R ø neutral

4 EKS 4 Mega Style MT 4 Central unit Fixing clip fixing Faceplate thickness mm... 3 mm Connection technology.1 mm² AWG mm² ribbon cable Operating current Recall light / permanent illumination U = V... 3 V DC smoothed 4 V max. ma with maximum permanent illumination 4 V max. 8 ma switching voltage = max. V DC / 5 V AC switching capacity = max. 3 W LED 4 75 Temperature range 5 C... 5 C and permanent illumination can be individually set at three different luminosity levels: dark, medium, bright max. 55 transponder identifiers Transponder technology type read only 4 Bit, 4 Bit Data frequency 15 khz possible identifiers 1.1 x 1¹² detection time approx.. s 8 34 Cutout C1 1 1 relay C R neutral 5.5

5 EKS 4 Mega Style RT 4, Style RT 4 wg Central unit Fixing clip fixing Faceplate thickness mm... 3 mm Connection technology.1 mm² AWG mm² ribbon cable EKS 4 Mega Style RT 4 Operating current Recall light / permanent illumination U = V... 3 V DC smoothed 4 V max. ma with maximum permanent illumination 4 V max. 8 ma switching voltage = max. V DC / 5 V AC switching capacity = max. 3 W LED Compliance Style RT 4 wg CLASS EKS 4 Mega Style RT 4 wg 4 75 Temperature range 5 C... 5 C and permanent illumination can be individually set at three different luminosity levels dark, medium, bright max. 55 transponder identifiers Transponder technology type read only 4 Bit, 4 Bit Data frequency 15 khz possible identifiers 1.1 x 1¹² detection time approx.. s Style RT 4 Style RT 4 wg retaining clamp Cutout C1 1 1 relay C.5.1 ø neutral

6 EKS 4 Mega Style EB 4 Central unit PSILO N Fixing clip fixing Faceplate thickness mm... 3 mm Connection technology.1 mm² AWG mm² ribbon cable Operating current Recall light / permanent illumination U = V... 3 V DC smoothed 4 V max. ma with maximum permanent illumination 4 V max. 8 ma switching voltage = max. V DC / 5 V AC switching capacity = max. 3 W LED 4 75 Temperature range 5 C... 5 C and permanent illumination can be individually set at three different luminosity levels dark, medium, bright max. 55 transponder identifiers Transponder technology type read only 4 Bit, 4 Bit Data frequency 15 khz possible identifiers 1.1 x 1¹² detection time approx.. s Cutout C1 1 1 relay C neutral 5.7

7 EKS 4 Mega VP Central unit, vandalresistant When mounted behind a stainless steel faceplate there is no need for a cutout for the EKS 4 Mega in the faceplate. The reader unit will be fixed at the rear of the faceplate by means of welding studs and the reading area will be marked on the front of the faceplate in any way. This variant is advantageous for example in connection with large push buttons or nonschaefer products to be independent from the design. With no access from the front the device is furthermore safe from manipulation, thus save from vandalism, water and dust. Compliance EKS 4 Mega VP 8171 CLASS 817 Please order fixing accessories separately Fixinf welding studs M3 x Faceplate thickness st. steel, mm Connection technology.1 mm² AWG mm² ribbon cable operating current U = V... 3 V DC smoothed 4 V max. 4 ma 4 V max. ma Temperature range 5 C... 5 C switching voltage = max. V DC / 5 V AC switching capacity = max. 3 W max. 55 transponder identifiers Transponder technology type read only 4 Bit, 4 Bit Data frequency 15 khz possible identifiers 1.1 x 1¹² detection time approx.. s welding stud M3 x 3.5 C1 1 1 relay C 5.8

8 EKS 5 Mega Central unit Fixing Faceplate thickness spacer nut... 1 mm, up to mm with spacer, as from mm without spacer Connection technology.1 mm² AWG mm² ribbon cable EKS 5 Q Mega Operating current Recall light / permanent illumination U = V... 3 V DC smoothed 4 V max. ma with maximum permanent illumination 4 V max. 8 ma switching voltage = max. V DC / 5 V AC switching capacity = max. 3 W LED option: compliance 8171 CLASS CLASS 817 Please order fixing accessories separately. EKS 5 R Mega 3 75 Temperature range 5 C... 5 C and permanent illumination can be individually set at three different luminosity levels dark, medium, bright max. 55 transponder identifiers Transponder technology type read only 4 Bit, 4 Bit Data frequency 15 khz possible identifiers 1.1 x 1¹² detection time approx.. s Cutout 4.1 C1 1 1 relay C R ø ø 54. Material code I. 4.3 neutral 5.9

9 MegaBeans Switching modules Fixing adhesive bond between fixing plate and faceplate Connection technology.1 mm²... AWG 8 1. mm² ribbon cable 3 MegaBean switching module common anode Variants 3wire technology, common anode 3wire technology, common cathode 4wire technology, common anode 4wire technology, common cathode U = V... 3 V DC smoothed standby current = max. 8 ma operating current = max. ma for button and controller Housing colour common anode red common cathode blue MegaBean switching module common cathode 8 19 MegaBean MegaBean fixing plate 8 5.1

10 EKS Mega / MegaBeans s 3wire technology Wiring Diagrams 3Draht, common anode 4wire technology Wiring Diagrams 4Draht, common anode V... 3 V DC V... 3 V DC controller call controller call 1 ribbon cable (MicroMatch) controller controller call controller 1 controller call 1 ribbon cable (MicroMatch) C C1 C C1 Wiring Diagrams 3Draht, common cathodee Wiring Diagrams 4Draht, common cathode... 3 V DC V... 3 V DC V controller call controller call 1 ribbon cable (MicroMatch) controller controller call controller 1 controller call 1 ribbon cable (MicroMatch) C C1 C C1 5.11

11 EKS Mega / MegaBeans Mounting / Installation EKS Mega and MegaBeans are mounted at the rear of the faceplate. Depending on the Style, the central unit is fixed by means of welding studs or by clip fixing and the fixing plates of the switching modules MegaBean are fixed to the faceplate by an adhesive bond. Via a pole ribbon cable with MicroMatch type connectors the EKS Mega is connected with the MegaBeans. These connectors fit any way. Each button, which is meant to be included in the access control system, needs an own MegaBean. The MegaBeans are connected between button and controller. Thus it is also possible to retrofit existing fixtures. installation with singlerow fixtures installation with doublerow fixtures MegaBean with fixing plate and ribbon cable 5.1