M115 PART NUMBERING Hall Effect Only. For special configurations, please call for assistance

Transcription

1 P-Q Controls, Inc. Doc. No: part_numbering_115 P: Dolphin Road Rev: B Date: F: Bristol, CT, Author: DAB Page: 1 of 1 M115 PART NUMBERING Hall Effect Only. For special configurations, please call for assistance M115 SL 15 F MODEL M115 Single Axis Joystick CENTER LOCK SL (Slide Lock) NL (No Lock) DL (Defeated Lock) Defeated lock may be removed in-field Ordering NL or DL may increase lead time GRIP STYLE 05 = 1-AXIS, NO HANDGRIP 15 = 1-AXIS, BALL KNOB 28 = 1-AXIS, RSG GRIP (ROCKER LEFT, RIGHT) 29 = 1-AXIS, RSG GRIP (ROCKER PUSH-BUTTON) 30 = 1-AXIS, RSTG ROCKER GRIP 31 = 1-AXIS, RSTG ROCKER GRIP WITH SIDE PUSH-BUTTON 32 = 1-AXIS, RSTG NO ROCKER, TRIGGER ONLY 33 = 1-AXIS, RSTG NO ROCKER, TRIGGER & SIDE PUSH-BUTTON 35 = 1-AXIS, RSTG NO ROCKER, TRIGGER & TOP PUSH-BUTTON 38 = 1-AXIS, TRS GRIP 39 = 1-AXIS, RSTG, NO RCKR, TRIGGER, TOP&SIDE BTTN TOGGLE 41 = 1-AXIS, RSTG, NO RCKR, TRIGGER & BUTTON TOGGLE 43 = 1-AXIS, MSG, 3 TOGGLE SWITCHES 44 = 1-AXIS, MSG, 4 TOGGLE SWITCHES 45 = 2-AXIS, MSG, 4 PUSH-BUTTONS TWIST 46 = 1-AXIS, MSG, 6 PUSH-BUTTONS 47 = 2-AXIS, MSG, 6 PUSH-BUTTONS TWIST 48 = 1-AXIS, MSG, 3 PUSH-BUTTONS 49 = 1-AXIS, MSG, 4 PUSH-BUTTONS 50 = 1-AXIS, TRS, NO ROCKER SWITCHES (PLASTIC CAP) 51 = 2-AXIS, MSG, 6 TOGGLE SWITCHES 52 = 1-AXIS, MSG, 4 TOGGLE & 2 PUSH BUTTON SWITCHES 53 = 1-AXIS, PISTOL, TRIGGER, PUSH-BUTTON ON TOP 54 = 2-AXIS, PISTOL, TWIST, TRIGGER WITH PUSH BUTTON ON TOP 57 = 2-AXIS, PISTOL, TRIGGER, SWTCH ROCKER & PRPRTNL TWIST 58 = 1-AXIS, MFHG, HALL TRIGGER 59 = 2-AXIS, PISTOL, TRIGGER, PROPORTIONAL TWIST 61 = 2-AXIS, PISTOL, TRIGGER, PROPORTIONAL ROCKER 62 = 1-AXIS, PISTOL, TRIGGER & SWITCHED ROCKER 63 = 1-AXIS, PISTOL, TRIGGER, PUSH-BUTTON ON CAP 64 = 2-AXIS, ERGO, TRIGGER & PROPORTIONAL ROCKER 65 = 1-AXIS, PISTOL, TRIGGER & SWTCH RCKR, 2 PSH-BTTNS (L) 66 = 2-AXIS, PISTOL, TRIGGER & PRPRTNL RCKR, 2 PSH-BTTNS (L/R) 67 = 1-AXIS, PISTOL, TRIGGER & SWTCH SEP COMMONS, RCKR, 2 PSH-BTTNS (L) etc Not all options are listed. Please call for further assistance. INTEGRATED VALVE DRIVER 504 Valve Drive Board For valves without integrated electronics. 504 is pre-programmed to customers valve [1] Must use Electrical Option 58 ELECTRICAL OPTION MECHANICAL OPTION S (Spring to center) F (Friction hold) FD (Friction hold w/ center detent) ELECTRICAL OPTIONS 56 = 10-30VDC, 2.5V NTRL ± 1.5V, 1.5 AMP DIR. AUX OUT 57 = 10-30VDC, 2.5V NTRL ± 1.25V, 1.5 AMP DIR. AUX OUT 58 = 5VDC, ± 30%, NO DIRECTIONAL AUX OUT 59 = 5VDC, ± 40%, NO DIRECTIONAL AUX OUT 60 = 18-60VDC, SEVCON, 1.5 AMP DIR. AUX OUT 61 = 10-30VDC, 2.5V NTRL ± 2.0V, 1.5 AMP DIR AUX OUT 62 = 10-30VDC, DANFOSS 63 = 10-30VDC, 0.0V NTRL V, 1.5 AMP DIR AUX OUT 64 = 10-30VDC, 2.5V NTRL ± 1.5V, 1.5 AMP 50% DIR. AUX OUT 65 = 18-60VDC, PWR PAK SVCN, 0.2 AMP SINK DIR. AUX OUT 67 = 10-30VDC, 0.0V NTRL + 5.0V, 1.5 AMP DIR AUX OUT 68 = 10-30VDC, 2.5V NTRL ± 2.0V, 1.5 AMP 50% DIR. AUX OUT 69 = 5VDC, ± 10%, NO DIRECTIONAL AUX OUT 70 = 5VDC, ± 25%, NO DIRECTIONAL AUX OUT 71 = 10-30VDC, 4-20mADC (4mADC NTRL, 20mADC ends) 1.5 AMP DIR. AUX OUT 72 = 10-30VDC, 4-20mADC (12mADC NEUT, 4 and 20mADC ends) 1.5 AMP DIR. AUX OUT 73 = SPLIT SUPPLY INPUT (0vdc NEUT, POS. VS & NEG. ENDS) 15mAMP DIR. AUX OUT If you do not see your option listed, please call for assistance. Valve Drive Board may be required to control hydraulic valve [1] (sold separately) For more details of electrical options, please see pages 4-5 of Datasheet M115. [1] For systems with hydraulic valves, please fill out our Valve Verification Form at; Property of P-Q Controls, Inc.

2 Overview: The Model 115 provides a weather-resistant, heavyduty mechanism to convert operators manual commands into electrical output over and extended life. What makes the Model 115 unique is its low profile below-panel mounting design, which saves space in an already compact package. The aluminum frame resists deformation due to extreme temperature changes, and allows our valve drive boards to be mounted on the side for added convenience. The simple design of the 115 provides a sturdy foundation, while offering a wide array of mechanical and electrical options. A choice of several other hand grip styles are also available. MECHANICS: Like all of our joysticks, the Model 115 uses thick-walled glass-reinforced nylon components, which provides an extremely high tensile strength, with excellent resistance to corrosion and wear. A helical compression spring centering mechanism has been opted for in place of torsion springs, which compensates for wear and eliminates the center-stop of a torsion spring-centering lever. The.375 inch diameter shaft is made of a special relief annealed seamless steel tubing that has been hardened and treated to resist corrosion. The shaft pivot is an oversized.75 inch diameter oil-impregnated bronze bushing, which further adds rigidity to the mechanism, making the Model 115 among the most durable control in its class. ELECTRONICS: The Model 115 of course uses Hall Effect sensors as a standard (potentiometric and switched outputs are also available), which eliminates any contact between moving electrical parts while further improving overall precision. Silicone dipping and potting further protects the electronics from direct exposure to the environmental corrosives. Key Advantages: Contactless Hall Effect Technology Below-Panel Mounted, Low Profile Design Robust, Over-Engineered Weather- Resistant Construction Friction Options Available EMI & RFI resistant Other available models: Please see our web site for more information on our product line ( Specifications: Shown with Ball Knob Electrical: Input: 5 VDC or VDC Contactless Hall Effect (see electrical options page for other options) Output: Max (+) Travel: 4.0 V DC Max (-) Travel: 1.0 V DC Centered: 2.5 VDC Output Impedance: 220 OHMS All inputs & outputs fully protected. Other outputs: (see page 2 for other options available) Mechanical: Travel: Bidirectional ± 30 Unidirectional + 60 Operating Force*: Light spring: 1.73 lb Standard spring: 3.92 lb Heavy spring: 4.88 lb * Force values are based on a 4.38 Moment Arm Friction and neutral detent available; friction drag approximately 3 lbs force. Environmental: Temperature: - 40 to 85 C (-40 to 185 F) Weather Resistance: Control is weather tight when mounted to panel using gasket supplied. Electronics are epoxy potted or silicone dipped. Material is UV protected.

3 MODEL 115 PART NUMBERING (Hall Effect Only) For special configurations, please call for assistance 115 SL 15 F 56 Model: 115 Single Axis Joystick Center Lock: SL (Slide Lock) NL (No Lock) DL (Defeated Lock) Defeated lock may be removed infield Ordering NL or DL may increase lead time Grip Style: 05 = 1-AXIS, NO HANDGRIP 15 = 1-AXIS, BALL KNOB 28 = 1-AXIS, RSG GRIP (ROCKER LEFT, RIGHT) 29 = 1-AXIS, RSG GRIP (ROCKER PUSH-BUTTON) 30 = 1-AXIS, RSTG ROCKER GRIP 31 = 1-AXIS, RSTG ROCKER GRIP WITH SIDE PUSH-BUTTON 32 = 1-AXIS, RSTG NO ROCKER, TRIGGER ONLY 33 = 1-AXIS, RSTG NO ROCKER, TRIGGER & SIDE PUSH-BUTTON 35 = 1-AXIS, RSTG NO ROCKER, TRIGGER & TOP PUSH-BUTTON 38 = 1-AXIS, TRS GRIP 39 = 1-AXIS, RSTG, NO RCKR, TRIGGER, TOP&SIDE BTTN TOGGLE 41 = 1-AXIS, RSTG, NO RCKR, TRIGGER & BUTTON TOGGLE 43 = 1-AXIS, MSG, 3 TOGGLE SWITCHES 44 = 1-AXIS, MSG, 4 TOGGLE SWITCHES 45 = 2-AXIS, MSG, 4 PUSH-BUTTONS TWIST 46 = 1-AXIS, MSG, 6 PUSH-BUTTONS 47 = 2-AXIS, MSG, 6 PUSH-BUTTONS TWIST 48 = 1-AXIS, MSG, 3 PUSH-BUTTONS 49 = 1-AXIS, MSG, 4 PUSH-BUTTONS 50 = 1-AXIS, TRS, NO ROCKER SWITCHES (PLASTIC CAP) 51 = 2-AXIS, MSG, 6 TOGGLE SWITCHES 52 = 1-AXIS, MSG, 4 TOGGLE & 2 PUSH BUTTON SWITCHES 53 = 1-AXIS, PISTOL, TRIGGER, PUSH-BUTTON ON TOP 54 = 2-AXIS, PISTOL, TWIST, TRIGGER WITH PUSH BUTTON ON TOP 57 = 2-AXIS, PISTOL, TRIGGER, SWTCH ROCKER & PRPRTNL TWIST 58 = 1-AXIS, MFHG, HALL TRIGGER 59 = 2-AXIS, PISTOL, TRIGGER, PROPORTIONAL TWIST 61 = 2-AXIS, PISTOL, TRIGGER, PROPORTIONAL ROCKER 62 = 1-AXIS, PISTOL, TRIGGER & SWITCHED ROCKER 63 = 1-AXIS, PISTOL, TRIGGER, PUSH-BUTTON ON CAP 64 = 2-AXIS, ERGO, TRIGGER & PROPORTIONAL ROCKER 65 = 1-AXIS, PISTOL, TRIGGER & SWTCH RCKR, 2 PSH-BTTNS (L) 66 = 2-AXIS, PISTOL, TRIGGER & PRPRTNL RCKR, 2 PSH-BTTNS (L/R) 67 = 1-AXIS, PISTOL, TRIGGER & SWTCH SEP COMMONS, RCKR, 2 PSH-BTTNS (L) etc Not all options are listed. Please call for further assistance. Electrical Option Mechanical Option: S (Spring to center) F (Friction hold) FD (Friction hold w/ center detent) Electrical Options: 56 = 10-30VDC, 2.5V NTRL ± 1.5V, 1.5 AMP DIR. AUX OUT 57 = 10-30VDC, 2.5V NTRL ± 1.25V, 1.5 AMP DIR. AUX OUT 58 = 5VDC, ± 30%, NO DIRECTIONAL AUX OUT 59 = 5VDC, ± 40%, NO DIRECTIONAL AUX OUT 60 = 18-60VDC, SEVCON, 1.5 AMP DIR. AUX OUT 61 = 10-30VDC, 2.5V NTRL ± 2.0V, 1.5 AMP DIR AUX OUT 62 = 10-30VDC, DANFOSS 63 = 10-30VDC, 0.0V NTRL V, 1.5 AMP DIR AUX OUT 64 = 10-30VDC, 2.5V NTRL ± 1.5V, 1.5 AMP 50% DIR. AUX OUT 65 = 18-60VDC, PWR PAK SVCN, 0.2 AMP SINK DIR. AUX OUT 67 = 10-30VDC, 0.0V NTRL + 5.0V, 1.5 AMP DIR AUX OUT 68 = 10-30VDC, 2.5V NTRL ± 2.0V, 1.5 AMP 50% DIR. AUX OUT 69 = 5VDC, ± 10%, NO DIRECTIONAL AUX OUT 70 = 5VDC, ± 25%, NO DIRECTIONAL AUX OUT 71 = 10-30VDC, 4-20mADC (4mADC NTRL, 20mADC ends) 1.5 AMP DIR. AUX OUT 72 = 10-30VDC, 4-20mADC (12mADC NEUT, 4 and 20mADC ends) 1.5 AMP DIR. AUX OUT 73 = SPLIT SUPPLY INPUT (0vdc NEUT, POS. VS & NEG. ENDS) 15mAMP DIR. AUX OUT If you do not see your option listed, please call for assistance. Valve Drive Board may be required to control most hydraulic valves (sold separately)

4

5

6

7 P-Q Controls, Inc. Doc. No: M504_JoystickConnection.DOC Phone (860) Dolphin Road Rev: - Date: Fax (860) Bristol, CT, Author: HGK Page: 1 of 1 M504 Connections to Single Axis Joystick Output termination styles and markings may change from model to model. Shown below is the standard connections for M100, M115 & M120 bi-directional joysticks. Signal Cable must be shielded. Connect shield to the GND terminal of the Model 504 board. Single Point Chassis Ground recommended. PT- 180 Ω + Battery GND SIG 500 Ω 2 WATTS PT+ CW 180 Ω Property of P-Q Controls, Inc.

8

9