The World s Smallest TOF Sensor lineup with analog output type

Transcription

1 7 New model TOF type with built-in digital panel series The World s Smallest TOF Sensor lineup with analog output type Analog output type and -control-output type The world s smallest TOF sensor Built-in digital display for simple setup FASTUS is a product brand of Optex FA. Related products detection C-R P.4 High-accuracy measurement CD P.464 Level control for lifts Selection table Type Sensing Interface Model Pig tail types are shown in parentheses Analog output Control output A (AM) Measuring of material level in tank TOF. to. m Control output T (TM) For the pig tail type, please order a connector cable. Monitoring of remaining non-woven fabrics Options/Accessories Connector cable Loop control for sheet materials DOL--GM Cable length: m * m and m cables are separately available. *Robot cables are also available.

2 TOF type with built-in digital panel series 7 World s smallest* Size: (W D H) mm Detect from up to. m away. Visualize s with the compact sensor. The FASTUS Series is the world s smallest TOF sensor *. This ultra-compact laser sensor is capable of detecting at s of up to. m. With a built-in digital display, configuring settings is simple. Notably, the Series is most useful with applications requiring height and target control, such as level and position detection and loop control at a manufacturing site. * Optex FA examination performed November 6. BGS TOF-V BGS-V TOF (Time Of Flight) principle The TOF principle measures the time it takes a pulse-emitted laser to hit a target and return, and the measurement is then converted into. With strong resistance to influences from the target s surface conditions, this principle is capable of producing stable detection. Sensor Target Receiver element: High-sensitivity APD stop Light source: laser diode start

3 7 TOF type with built-in digital panel series Features Easy-to-See Digital Display With its ultra-compact size, the Series is equipped with a three-digit, easy-to-see digital display. The display allows users to check the showing numerical values. This digital display also makes threshold adjustments easy. Analog output type RUN button Threshold (+) adjustment button -control-output type RUN button Threshold (+) adjustment / Output (Q) selection button BGS TOF-V SET button Threshold ( ) adjustment / Output (Q) selection button Easy-to-See Indicators and Stability Output The indicators used on the Series allow for easy visibility from any angle. In addition, users are able to switch output to Stability Output. Stability Output turns ON (Central indicator = Green) when detection is stable and turns OFF (Central indicator = Red) when detection is not possible. SET / Output (Q) selection button Threshold ( ) adjustment / Output (Q) selection button BGS-V Indicators visible from any direction Class Light Source The Class laser used in the Series opens the door to long detecting at up to. m without sacrificing eye safety. In addition, the spot is clearly visible, making light axis alignments easy.

4 Specifications TOF type with built-in digital panel series Type Analog output type -control-output type Cable type A T Model * Pig tail type AM TM Sensing *. to. m Light Medium/Wavelength Red semiconductor laser, wavelength: 6 nm source Average output 9 μw or less class Class (IEC/JIS/FDA * ) Spot size *4 ø mm (At a of. m) Sampling period / Response time μs / μs or less (When performing moving average once) Hysteresis % or less Distance adjustment Teaching (Manual adjustment possible after teaching) Indicators Output indicator (Orange), Stability indicator / laser off indicator: (Green) / (Red) / (Off) Output indicator (Orange), Output indicator (Orange), Output indicator / Stability indicator / off indicator: (Orange) / (Green) / (Red) / (Off) Digital display 7-segment, -digit LED display (Display unit: cm) OFF input / Teaching input (Selectable by setting) No. of outputs (Output available by switching external input) Control Stability output Output switchable to stability output (Selectable by setting) output Type Open collector (NPN/PNP selectable by setting), Max. ma / VDC, residual voltage.8 V Max. Output mode Light ON / Dark ON selectable (Output through will be set to same output mode for -control-output type) Analog Current output 4 to ma, impedance: Ω or less output Voltage output to V, Output impedance: Ω or less Not equipped Connection type Cable type: ø4. mm, m cable, Pig tail type: Cable with M -pin connector, mm Protection circuit Reverse connection protection, Overcurrent protection Rating Supply voltage to VDC, including % ripple (p-p) * to VDC, including % ripple (p-p) Current consumption 6 ma or less *6 EMC EMC directive (4//EU) RoHS RoHS directive (/6/EU), China RoHS (Directive ) Safety FDA regulations ( CFR 4. and 4. *7 ) Applicable standards EN / IEC 68- EN / IEC 68- Ambient temperature/humidity to + C (No freezing) / to 8% RH (No condensation) Ambient illuminance Sunlight: 4, lx or less, Fluorescent lamp:, lx or less Vibration resistance to Hz, double amplitude. mm, hours in each of the XY and Z directions Shock resistance m/s ( G), times in each of the XY and Z directions Degree of protection IEC standard, IP67 Material Housing: PC, Front cover: PMMA Weight (Incl. cable) Cable type: 88 g, Pig tail type: 48 g Included accessories Mounting bracket: BEF-WK-9, Mounting screws (M mm) Applicable regulations Environmental resistance * Connector type (M8, 4-pin) also available (Built to order). * For black paper (6% reflectance), gray paper (8% reflectance), and (9% reflectance). * In accordance with the FDA provisions of Notice No., the laser is classified as Class per the IEC 68-:7 and 4 standards. *4 Defined with /e (.%) of the center strength at the maximum detection. The sensor may be affected by light leakage at spot sizes other than the default and when there is a highly reflective object close to the detection area. * For analog output types, use a power supply voltage of. VDC or higher to obtain normal output. *6 Not including control output load current. *7 Excluding differences per Notice No.. Note that specifications are subject to change without prior notice for product improvement purposes. 7 BGS TOF-V BGS-V

5 74 TOF type with built-in digital panel series Dimensions Sensor Cable type of receiver of emitter Display. Pig tail type (Unit: mm) M (Tightening torque:. N m or less) ø4., -wire. mm, m 4 ø4. M -pin connector BGS ø4 Mounting bracket BEF-WK-9: Floor-mounted Wall-mounted TOF-V BGS-V R. -R of receiver of emitter R M of receiver of emitter 7 R R. R Connector cable DOL--GM O-ring M ø. ø8.8 ø. ø L L = Cable section material: PVC Conductor cross-section: -wire. mm

6 I/O circuit diagram Analog output type: With the NPN setting Internal circuit Brown: Black: 4 Gray: White: Blue: TOF type with built-in digital panel series Control output Analog output Analog signal evaluation unit to VDC V 7 Analog output type: With the PNP setting Brown: to VDC Black: 4 Control output BGS Internal circuit Gray: White: Blue: Analog output Analog signal evaluation unit V TOF-V BGS-V Pig tail type pin No. to are connector pin No. 4 to VDC Analog output V 4 Control output Notes When using a switching regulator for the power supply, be sure to ground the frame ground terminal. Wring sensor cables with high-voltage or power supply lines can result in malfunctions due to noise, which can cause damage, make sure to wire separately. Avoid using the transient state while the power is on (approx. ms).

7 76 TOF type with built-in digital panel series I/O circuit diagram -control-output type: With the NPN setting Internal circuit to V Brown: Black: 4 Control output White: Control output Gray: (Control output ) to VDC Switched to output Switched to input Blue: -control-output type: With the PNP setting Brown: V to VDC BGS TOF-V BGS-V Internal circuit Black: 4 Control output White: Control output Gray: (Control output ) Switched to input Switched to output Blue: V Pig tail type pin No. to are connector pin No. 4 to VDC Control output V 4 Control output (Control output ) Notes When using a switching regulator for the power supply, be sure to ground the frame ground terminal. Wring sensor cables with high-voltage or power supply lines can result in malfunctions due to noise, which can cause damage, make sure to wire separately. Avoid using the transient state while the power is on (approx. ms).

8 TOF type with built-in digital panel series 77 Typical characteristic data Operating point Y (mm) Sensing area - White paper m mm mm White paper 9% ( mm) X Y Y Operating point Y (mm) Sensing area - Gray paper m mm mm Gray paper 8% ( mm) X Y Y Operating point Y (mm) Sensing area - Black paper m mm mm Black paper 6% ( mm) X Y Y Optical plane Distance X(m) Distance X(m) Distance X(m) ø4 mm Spot size ø6 mm ø8 mm ø mm ø mm BGS... Hysteresis - Moving average: once 4 4 6%/9% Gray paper/ 8%/9% 9%/9% Hysteresis - Moving average: 4 times 4 4 9%/9% 6%/9% Gray paper/ 8%/9% Hysteresis - Moving average: 6 times 4 4 6%/9% Gray paper/ 8%/9% 9%/9% Hysteresis - Moving average: 64 times 4 4 6%/9% Gray paper/ 8%/9% 9%/9% TOF-V BGS-V Hysteresis - Moving average: 6 times 4 Repeat accuracy - White paper Repeat accuracy - Black paper Material response 4 6%/9% Gray paper/ 8%/9% 9%/9% Repeat accuracy (mm) Moving average Once 4 times 6 times 64 times 6 times Repeat accuracy (mm) Moving average Once 4 times 6 times 64 times 6 times Sensing (m)..... White paper,. m setting White paper,. m setting White paper,. m setting White paper,. m setting White paper Black paper Veneer board Cardboard Black rubber Aluminum