PMMAD Series ULTRA LOW CAPACITANCE MULTI-LINE STEERING DIODE ARRAY DESCRIPTION SO-14 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
|
|
- Phoebe Ray
- 6 years ago
- Views:
Transcription
1 ULTRA LOW CAPACITANCE MULTI-LINE STEERING DIODE ARRAY DESCRIPTION The are a low distortion steering diodes. These devices are intended for use in high frequency analog or digital data I/O ports for protection against Electrostatic Discharge (ESD) and Electrical Fast Transients (EFT). The is connected between rail-to-rail voltage bus or rail-to-ground for clamping and diverting overvoltage transients for the protection of sensitive network interface circuits. This series provides low capacitance, which insures signal integrity up to 900MHz, while complete isolation between adjacent diodes keeps cross-talk to a minimum. The is available in a SO- package and meets the IEC , IEC and IEC requirements. SO- PACKAGE FEATURES Compatible with IEC (ESD): Air - 15kV, Contact - 8kV Compatible with IEC (EFT): 40A - 5/50ns Compatible with IEC (Surge): 4A, 8/0µs - Level (Line- Gnd) & Level 3(Line-Line) 500 Milliwatt Continuous Power Dissipation Low Insertion Loss & Cross-Talk ESD Protection > 5 kilovolts Protects 8 I/O Lines Working Voltage > 50 Volts Low Leakage Current < 0.1µA Ultra Low Capacitance: 5pF per Diode RoHS Compliant REACH Compliant APPLICATIONS High Frequency Data Lines RS-3 & RS-4 Interface Networks Ethernet 10/100 Base T Computer I/O Ports MECHANICAL CHARACTERISTICS Molded JEDEC SO- Package Approximate Weight: 0.15 grams Lead-Free Pure-Tin Plating (Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: C 16mm Tape and Reel Per EIA Standard 481 Flammability Rating UL 94V-0 CIRCUIT DIAGRAM + I/O PORT GND OR (-) R15 5/18 Page 1
2 PIN IDENTIFICATION AND CONFIGURATION 1 PMMAD1103 PMAD Diode Array NC Pins 4, 6, 10 & 13 8 Lines of Protection 8 Diode Common Cathode Array NC Pins 1, 4, 6, 10 & 13 8 Lines of Protection PMMAD PMMAD Diode Common Anode Array NC Pins 1, 4, 6, 10 & 13 8 Lines of Protection 7 Isolated Diode Array (Independent) 7 Lines of Protection R15 5/18 Page
3 TYPICAL DEVICE CHARACTERISTICS 5 C Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS Continuous Power Dissipation P PK 500 Milliwatts Continuous Forward Current (Single Diode) I P 400 ma Repetitive Peak Forward tp = 5µs, F = 50kHz I FRM 700 ma Operating Temperature T A -55 to 150 C Storage Temperature T STG -55 to 150 C PART NUMBER ELECTRICAL CHARACTERISTICS PER 5 C Unless Otherwise Specified REPETITIVE PEAK REVERSE VOLTAGE FORWARD PEAK PULSE CURRENT FORWARD VOLTAGE REVERSE LEAKAGE CURRENT CAPACITANCE (Per 10µA V RRM 8/0µs I FM 100mA V F VOLTS V 40V I R 1MHz C J pf PMMAD PMMAD PMMAD PMMAD I PP - Peak Pulse Current - % of I PP t f FIGURE 1 PULSE WAVE FORM Peak Value I PP e -t t d = t/(i PP /) TEST WAVEFORM PARAMETERS t f = 8µs t d = 0µs t - Time - µs R15 5/18 Page 3
4 SPICE MODEL FIGURE 1 SPICE MODEL I/O V CC+ LCRD LCRD Lg 0.6nH I/O LCRD Lg 0.6nH PMMAD1105 PMMAD1106 PMMAD1109 PMMAD1103 LCRD - Low Capacitance Rectifier Diode Lg - Lead Inductance TABLE 1 - SPICE PARAMETERS PARAMETER UNIT LCRD BV V 00 IBV µa 0.01 C jo pf 3 I S A 1E-13 Vj V 0.6 M N - 1 R S Ohms 0.31 TT s 1E-9 EG ev R15 5/18 Page 4
5 SO- PACKAGE INFORMATION OUTLINE DIMENSIONS -A- MILLIMETERS INCHES DIM MIN MAX MIN MAX A B C B- P + 7 PL (0.5mm) M B M D F G 1.7 BSC 0.05 BSC J K G D C R X P R NOTES 1. -T- = Seating plane and datum surface.. Dimensions A and B are datum. 3. Dimensions A and B do not include mold protrusion. 4. Maximum mold protrusion is (0.380mm) per side. 5. Dimensioning and tolerances per ANSI Y.5M, Dimensions are exclusive of mold flash and metal burrs. -T (0.5mm) M T B S A S PL K J F DIM PAD LAYOUT DIMENSIONS MILLIMETERS INCHES MIN MAX MIN MAX A B A B C D E NOTES 1. Controlling dimension: inches. D C R15 5/18 Page 5
6 TAPE AND REEL P0 10 Pitches Cumulative Tolerance on tape ± 0. t D P E F W K0 B0 A0 P User Direction of Feed REEL DIA. TAPE WIDTH SPECIFICATIONS A0 B0 K0 D E F W P0 P P tmax 178mm (7 ) 16mm 6.70 ± ± ± ± ± ± ± ± ± ± NOTES 1. Dimensions are in millimeters.. Surface mount product is taped and reeled in accordance with EIA Suffix - T7 = 7 Reel - 1,000 pieces per 16mm tape. 4. Suffix - T13 = 13 Reel -,500 pieces per 16mm tape. 5. Bulk product shipped in tubes of 55 pieces per tube. 6. Marking on Part - part number, date code, logo and pin one defined by dot on top of package. BASE PART NUMBER (xx = Voltage) ORDERING INFORMATION LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE QTY PMMADxxxx -LF -T7 1, PMMADxxxx -LF -T13, This device is only available in a Lead-Free configuration R15 5/18 Page 6
7 COMPANY INFORMATION COMPANY PROFILE In business more than 0 years, ProTek Devices is a privately held semiconductor company. The company offers a product line of overvoltage protection and overcurrent protection components. These include transient voltage suppressor array (TVS arrays) avalanche breakdown diode, steering diode TVS array and electronics SMD chip fuses. These components deliver circuit protection in electronic systems from numerous overvoltage and overcurrent events. They include lightning; electrostatic discharge (ESD); nuclear electromagnetic pulses (NEMP); inductive switching; and electromagnetic interference (EMI) / radio frequency interference (RFI). ProTek Devices also offers LED wafer die for ESD protection and related high frequency products. CONTACT US Corporate Headquarters 99 South Fair Lane Tempe, Arizona 858 USA By Telephone General: Sales: & Marketing: Customer Service: Product Technical Support: By Fax General: By Asia Sales: asiasales@protekdevices.com Europe Sales: europesales@protekdevices.com U.S. Sales: ussales@protekdevices.com Distributor Sales: distysales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com ProTek Devices (Asia Pacific) Pte. Ltd. 8 Ubi Road, #06-19 Zervex Singapore Tel: Fax: Web COPYRIGHT ProTek Devices This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory R15 5/18 Page 7
PMAD Series. High Frequency Data Lines RS-232 & RS-422 Interface Networks Ethernet 10/100 Base T Computer I/O Ports
ultra low capacitance multi-line steering diode array Description The are a low distortion steering diodes. These devices are intended for use in high frequency analog or digital data I/O ports for protection
More informationSR70 ULTRA LOW CAPACITANCE STEERING DIODE ARRAY DESCRIPTION SOT-143 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE STEERING DIODE ARRAY DESCRIPTION The is an ultra low capacitance steering diode array. Designed for protection against Electrostatic Discharge (ESD), Electrical Fast Transients (EFT)
More informationPLC WATT ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION SO-8 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
00 WATT ULTRA LOW CAPACITAE TVS ARRAY DESCRIPTION The is an ultra low capacitance TVS array that provides two lines of protection. This device protects high-frequency applications such as voice and data
More informationPESD2CAN CAN BUS ESD PROTECTION DIODE DESCRIPTION SOT-23 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
CAN BUS ESD PROTECTION DIODE DESCRIPTION The is designed to protect Controller Area Network (CAN) bus lines and other industrial applications such as DeviceNet Bus lines from the damaging effects of Electrostatic
More informationUSB208. ultra low capacitance steering diode array. Description. applications
ultra low capacitance steering diode array Description The is an ultra low capacitance steering diode array. This device provides circuit protection for computer interfaces, wireless bus applications and
More informationSRV05-4 ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SOT-23-6 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is a dual USB port protection array that features ultra low capacitance. This device can be used in applications such as video cards, SMART
More informationPLR ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SC-89 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is an ultra low capacitance (0.7pF Max. I/O to I/O) steering diode and TVS array combo. This device provides circuit protection for interfaces
More informationSRV25-4LC ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION DFN-10 PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is a dual USB port protection array that features ultra low capacitance. This device can be used in applications such as video cards, SMART
More informationPLR0521E ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION DFN-2 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The is an ultra low capacitance transient voltage suppressor array, designed to protect computing applications from the damaging effects of Electrostatic Discharge
More informationEBLC05C - EBLC12C ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION SOD-323 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The EBLCxxC Series are ultra low capacitance transient voltage suppressor arrays, designed to protect applications such as portable electronics and SMART phones.
More informationPAM2CAN CAN BUS ESD PROTECTION DIODE DESCRIPTION SOT-23 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
CAN BUS ESD PROTECTION DIODE DESCRIPTION The is designed to protect Controller Area Network (CAN) bus lines and other industrial applications from the damaging effects of Electrostatic Discharge (ESD)
More informationPSM WATT TVS ARRAY - ASYMMETRICAL DATA LINE PROTECTOR PIN CONFIGURATION
600 WATT TVS ARRAY - ASYMMETRICAL DATA LINE PROTECTOR Description The is an asymmetrical transient voltage suppressor (TVS) array, designed specifically for RS-485 applications. This device provides protection
More informationPLR0506LP BOTTOM VIEW ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION DFN-8 PACKAGE FEATURES APPLICATIONS
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is an ultra low capacitance steering diode/tvs array. This device is designed to protect computing applications such as gigabit Ethernet,
More informationPLCDA03C-6 - PLCDA15C-6
5 WATT MULTI-LINE LOW CAPACITANCE TVS ARRAY Description The PLCDAxxC-6 Series are low capacitance multi-line transient voltage suppressor arrays that provides board level protection for standard TTL and
More informationPAM04DF ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION DFN-10 PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is an ultra low capacitance steering diode/tvs array. This device is designed to protect automotive applications. The is available in the
More informationPLR0514LC ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION DFN-10 PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is an ultra low capacitance, 4-channel steering diode/tvs array. This device is designed to protect computing applications such as Gigabit
More informationPSOT03LC - PSOT36LC 500 WATT ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION SOT-23 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
500 WATT ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The PSOTxxLC series are ultra low capacitance transient voltage suppressor (TVS) arrays, designed for power or data line applications that provide protection
More informationPLC497 ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SOT-23 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is an ultra low capacitance steering diode/tvs array. Designed for protection against Electrostatic Discharge (ESD), Electrical Fast Transients
More informationDSL03-24T ULTRA LOW CAPACITANCE STEERING DIODE/THYRISTOR ARRAY DESCRIPTION SOT-23-6 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
ULTRA LOW CAPACITANCE STEERING DIODE/THYRISTOR ARRAY DESCRIPTION The provides ESD, EFT and surge protection for high-speed data interfaces. The 24V thyristor array, steering diode combination device meets
More informationSRV05-4. ultra low capacitance steering diode/tvs array. Description. sot-23-6 package. applications
ultra low capacitance steering diode/tvs array Description The is a dual USB port protection array that features ultra low capacitance. This device can be used in applications such as video cards, SMART
More informationRSB6.8S LOW CAPACITANCE TVS ARRAY DESCRIPTION SC-79 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
LOW CAPACITANCE TVS ARRAY DESCRIPTION The is a low capacitance, transient voltage suppressor designed to protect applications such as wireless telecommunication devices, PCMCIA cards and portable electronics.
More informationGBLC03 - GBLC24C. Ethernet 10/100/1000 Base T SMART Phones Handheld - Wireless Systems USB Interface
ultra LOW CAPACITANCE TVS ARRAY Description The GBLCxx and GBLCxxC Series are ultra low capacitance transient voltage suppressor arrays, designed to protect applications such as portable electronics and
More informationPSLC03 - PSLC24C. 350 watt low capacitance tvs array. applications
350 watt low capacitance tvs array Description The PSLC and PSLCxxC Series of devices are low capacitance TVS arrays available in a SOT-3 package. These devices are designed to protect Ethernet data I/O
More informationPLR0524P ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION DFN-10 PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is an ultra low capacitance steering diode/tvs array. This device is designed to protect computing applications such as gigabit Ethernet,
More informationSLVU WATT ULTRA LOW CAPACITANCE TVS ARRAY PIN CONFIGURATION
600 WATT ULTRA LOW CAPACITANCE TVS ARRAY Description The is a low voltage, low leakage current and ultra low capacitance TVS device designed for EOS and ESD protection of low voltage circuits commonly
More informationLCD05C - LCD24C HIGH POWERED MULTI-LINE TVS ARRAY DESCRIPTION 16 PIN DIP PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
HIGH POWERED MULTI-LINE TVS ARRAY DESCRIPTION The LCD Series are high powered multi-line TVS arrays available in a 16 pin DIP package. This series is designed to protect high-speed applications from the
More informationEM8D-100L EMI FILTER/TVS ARRAY DESCRIPTION DFN-16 PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS CIRCUIT DIAGRAM & PIN CONFIGURATION
EMI FILTER/TVS ARRAY DESCRIPTION The is a DFN-16, 8 line low pass filter array with integrated TVS diodes. The is designed to suppress unwanted EMI/RFI signals and provide ESD protection for high-speed
More informationESD4-DFN LOW CAPACITANCE TVS ARRAY PIN CONFIGURATION
LOW CAPACITANCE TVS ARRAY Description The is a multi-line, low capacitance, 7pF @ 2.5V bias transient voltage suppressor array. This device is designed to protect applications such as wireless telecommunication
More informationPSLC03 - PSLC24C. 350 watt low capacitance tvs array. applications
350 watt low capacitance tvs array Description The PSLC and PSLCxxC Series of devices are low capacitance TVS arrays available in a SOT-3 package. These devices are designed to protect Ethernet data I/O
More informationSMDD3K Series HIGH POWERED DSIP TVS ARRAY DESCRIPTION DSIP PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATIONS
HIGH POWERED DSIP TVS ARRAY DESCRIPTION The are high powered TVS arrays available in a 16 pin Dual SIP package. These devices are designed to protect telecommunications equipment from the damaging effects
More informationGBLC03 - GBLC24C. Ethernet 10/100/1000 Base T SMART Phones Handheld - Wireless Systems USB Interface
ultra LOW CAPACITANCE TVS ARRAY Description The GBLCxx and GBLCxxC Series are ultra low capacitance transient voltage suppressor arrays, designed to protect applications such as portable electronics and
More informationCP05 - CP24C MULTI-LINE TVS ARRAY PIN CONFIGURATIONS
MULTI-LINE TVS ARRAY Description The CPxx and CPxxC series are subminiature monolithic TVS suppressor arrays designed for the protection of sensitive IC components from the damaging effects of Electrostatic
More informationP0201V05 ULTRA LOW CAPACITANCE ESD PROTECTION COMPONENT DESCRIPTION APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE ESD PROTECTION COMPONENT DESCRIPTION The is an ultra low capacitance ESD component designed to protect very high-speed data interfaces. The device has a typical capactiance of only
More informationP0603V24 ULTRA LOW CAPACITANCE ESD PROTECTION COMPONENT DESCRIPTION FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE ESD PROTECTION COMPONENT DESCRIPTION The is an ultra low capacitance ESD component designed to protect very high-speed data interfaces. The device has a typical capactiance of only
More informationPUSB403 ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS
ULTRA LOW APAITANE STEERING DIODE/TVS ARRAY DESRIPTION The is an ultra low capacitance steering diode/tvs array. This device is designed to protect computing applications such as gigabit Ethernet, HDMI,
More informationP0402FC3.3C - P0402FC36C
250W FLIP CHIP TVS ARRAY DESCRIPTION The P0402FCxxC Series Flip Chips employ advanced silicon P/N junction technology for unmatched board-level transient voltage protection against Electrostatic Discharge
More informationPSR3.3. ultra low capacitance steering diode/tvs array. Description. applications
ultra low capacitance steering diode/tvs array Description The is an ultra low capacitance (typically 1.5pF), transient voltage/steering diode suppressor array. This device provides circuit protection
More informationPLRO1206 Series POLYMER PTC DEVICE DESCRIPTION PTC DEVICE APPLICATIONS FEATURES ENVIRONMENTAL SPECIFICATIONS MECHANICAL CHARACTERISTICS
POLYMER PTC DEVICE DESCRIPTION Surface mount PTC devices are the preferred over-current protection method for computer, consumer electronic, portable electronics and automotive applications. These devices
More informationULC0402FC3.3C - ULC0402FC36C
200W LOW CAPACITANCE UNBUMPED FLIP CHIP TVS ARRAY DESCRIPTION The ULC0402FCxxC Series Flip Chips employ advanced silicon P/N junction technology for unmatched board-level transient voltage protection against
More informationULL0402FC05C. Description. Mechanical characteristics PIN CONFIGURATION. SMART Phones Portable Electronics SMART Cards
LOW CAPACITANCE unbumped flip chip tvs array Description The ULLC0402FC05C Flip Chip employs advanced silicon P/N junction technology for unmatched board-level transient voltage protection against Electrostatic
More informationAPPLICATIONS ELECTRICAL SPECIFICATIONS. MAXIMUM FAULT CURRENT (Note 4) I MAX AMPS. MAXIMUM INTERRUPT VOLTAGE (Note 3) V MAX VOLTS
POLYMER PTC DEVICE DESCRIPTION Surface mount PTC devices are the preferred over-current protection method for computer, consumer electronic, portable electronics and automotive applications. These devices
More informationPMPS-E-1206 SERIES POLYMER PTC DEVICE DESCRIPTION PTC DEVICE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
POLYMER PTC DEVICE DESCRIPTION Surface mount PTC devices are the preferred over-current protection method for computer, consumer electronic, portable electronics and automotive applications. These devices
More informationPMPS Description. ptc device. applications
polymer ptc device Description Surface mount PTC devices are the preferred over-current protection method for computer, consumer electronic, portable electronics and automotive applications. These devices
More informationBASIC REFERENCE DATA. Maximum Voltage (RMS) 600 V Temperature Range -40 to +85 C Resistance (25 C) 6-12 Ω ELECTRICAL SPECIFICATIONS
POLYMER PTC THERMISTOR DESCRIPTION Surface mount PTC devices are the preferred over-current protection method for computer, consumer electronic, portable electronics and automotive applications. These
More informationAPPLICATIONS DEVICE SYMBOL BIDIRECTIONAL TABLE 1 - SURGE RATINGS AMPS
THYRISTOR SURGE SUPPRESSOR DESCRIPTION The PP-SM Series are thyristor surge suppression (TSS) devices designed to protect telecommunication equipment against lightning and transients induced by AC power
More informationPLCDA03C-6 thru PLCDA24C-6 LOW CAPACITANCE TVS ARRAY
51-6 -6 LOW APAITANE TVS ARRAY APPLIATIONS Ethernet - 1/1 Base T FireWire SSI Bluetooth & RF IE OMPATIBILITY (EN61-) 61-- (ESD): Air - 15kV, ontact - kv 61-- (EFT): A - 5/5ns 61--5 (Surge): A, /µs - Level
More informationRClamp0504S RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
More informationFeatures. Applications
Description are surge rated diode arrays designed to protect high speed data interfaces. The SR series has been specifically designed to protect sensitive components which are connected to data and transmission
More informationRClamp0504F RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
More informationPESDALC143T5VU Low Capacitance ESD Protector
Low Capacitance ESD Protector Description The is low capacitance transient voltage suppressor for high speed data interface that designed to protect sensitive electronics from damage or latch-up due to
More informationNUP2114 Series, SNUP2114UCMR6T1G Transient Voltage Suppressors Low Capacitance ESD Protection for High Speed Data
NUP2114 Series, SNUP2114UCMR6T1G Transient Voltage Suppressors Low Capacitance ESD Protection for High Speed Data The NUP2114 transient voltage suppressor is designed to protect high speed data lines from
More informationRClamp0502A RailClamp Low Capacitance TVS Array
- RailClamp Description The RailClamp series consists of ultra low capacitance TS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
More informationSRV05-4 RailClamp Low Capacitance TVS Diode Array
Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The SR series has been specifically designed to protect sensitive components which are connected to data
More informationRClamp0504FA RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamp low capacitance TVS array designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
More informationSDC15. TVS Diode Array for ESD Protection of 12V Data and Power Lines. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The transient voltage suppressor (TVS) is designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD), electrical
More informationRClamp2504P & RClamp3304P RailClamp 2.5V & 3.3V TVS Arrays
- RailClamp Description RailClamp is a low capacitance TS array designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description is surge rated diode arrays designed to protect high speed data interfaces. It has been specifically designed to protect sensitive
More informationPTVSLC3D5VB Low Capacitance TVS
Low Capacitance TVS Description The is a low capacitance transient voltage suppressor for high speed data interface that designed to protect sensitive electronics from damage or latch-up due to ESD lightning,
More informationSDC36C. TVS Diode Array for Proximity Switch Input Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Description The is a highsurge transient voltage suppressor (TS) optimized for protection of sensitive digital sensors used in proximity switches and industrial control applications. The protects the components
More informationAQ24CANFD 200W TVS Diode Array
AQ24CANFD 200W TVS Diode Array RoHS Pb GREEN Description The AQ24CANFD is designed to protect automotive Controller Area Network (CAN lines from damage due to electrostatic discharge (ESD, electrical fast
More informationNUP4114UCW1T2G. Transient Voltage Suppressors. ESD Protection Diodes with Low Clamping Voltage
Transient Voltage Suppressors ESD Protection Diodes with Low Clamping Voltage The NUP4114UCW1 transient voltage suppressor is designed to protect high speed data lines from ESD. Ultra low capacitance and
More informationRClamp0504PA RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamp TVS diodes are specifically designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage caused by ESD (electrostatic
More informationRClamp0522P RClamp0524P
PROTECTION PRODUCTS - RailClamp Description RailClamps are ultra low capacitance TVS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
More informationRClamp1502B. Ultra-Low Capacitance TVS for ESD and CDE Protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics
- RailClamp Description RailClamps are ultra low capacitance TS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are
More informationRClamp0582B. Low Capacitance RClamp ESD and EOS Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
RClamp582B Low Capacitance RClamp ESD and EOS Protection PROTECTION PRODUCTS Description The RClamp 582B transient voltage suppressor is specifically designed to protect sensitive components which are
More informationPTVSLC3D24VB Low Capacitance TVS
Description The is a low capacitance transient voltage suppressor for high speed data interface that designed to protect sensitive electronics from damage or latch-up due to ESD lightning, and other voltage
More informationSMDA05C-7 THRU SMDA24C-7
Description The SMDAxxC-7 series of transient voltage suppressors are designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge
More informationPTVSHC2EN10VU Transient Voltage Suppressor
Transient Voltage Suppressor Description The ESD protector is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and PDA s. They feature large
More informationSRV05-4L. Ultra Low Capacitance Array for ESD Protection. Features. Description. Main applications. Protection solution to meet. Ordering Information
Ultra Low Capacitance Array for ESD Protection Description The provides a typical line to line capacitance of 0.80pF and low insertion loss up to 3GHz providing greater signal integrity making it ideally
More informationCDMSP M Surface Mount TVS Diode Array
*RoHS COMPLIANT Features RoHS compliant* Protects four I/O lines Ultra-low capacitance ~.55 pf ESD protection > kv Surge protection Applications High Definition Multimedia Interface (HDMI) Digital Visual
More informationDATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER UDD32CXXL01 series
Product specification November 05, 2018 V.0 DATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER series RoHS compliant & Halogen free 2 Electrostatic Discharged Protection Devices
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description Brightking s component is surge rated diode array designed to protect high speed data line interfaces. It has been specifically
More informationTClamp1202P. Low Capacitance TClamp Surge Protection for 12V Interfaces. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
TClamp122P Low Capacitance TClamp Surge Protection for 12V Interfaces PROTECTION PRODUCTS Description TClamp 122P provides dedicated surge and ESD protection for RS-485 and other 12V lines in industrial
More informationPTVSHC3N7VUL1 Transient Voltage Suppressor
Transient Voltage Suppressor Description The ESD protector is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and PDA s. They feature large
More informationPESDALC10N3V3U Low Capacitance TVS Array
Description The is low capacitance transient voltage suppressor array for high speed data interface that designed to protect sensitive electronics from damage or latch-up due to ESD lightning, and other
More informationuclamp0801t Low Profile μclamp 1-Line ESD protection PROTECTION PRODUCTS - MicroClamp Description Features Mechanical Characteristics Applications
- MicroClamp Description The μclamp series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD. It is designed to replace multilayer varistors (MLVs) in portable
More informationCM1219. Low Capacitance Transient Voltage Suppressors / ESD Protectors
Low Capacitance Transient Voltage Suppressors / ESD Protectors Description The family of devices features transient voltage suppressor arrays that provide a very high level of protection for sensitive
More informationPESDWC23T5VU ESD Protector
ESD Protector Description The is a Transient Voltage Suppressor Arrays that 3 designed to protect components which are connected to data and transmission lines against electrostatic discharge(esd), electrical
More informationRClamp TM 0504M RailClamp Low Capacitance TVS Diode Array PRELIMINARY Features
Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The RClamp series has been specifically designed to protect sensitive components which are connected
More informationPESDSC9D5VU ESD Protector
ESD Protector Description The ESD protector is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and PDA s. They feature large cross-sectional
More informationPESDLC553T5VU Low Capacitance ESD Protector
Description The is a TVS array designed to protect I/O or data lines from the damaging effects of ESD. It is low capacitance transient voltage suppressors for high speed data interface that designed to
More informationMG2040. Transient Voltage Suppressors. Low Capacitance ESD Protection for High Speed Video Interface
Transient Voltage Suppressors Low Capacitance ESD Protection for High Speed Video Interface The MG24 transient voltage suppressor is designed specifically to protect HDMI and Display Port with full functionality
More informationESD5Z2.5T1G Series, SZESD5Z2.5T1G Series. Transient Voltage Suppressors. Micro Packaged Diodes for ESD Protection
ESD5Z2.5T1G Series, SZESD5Z2.5T1G Series Transient Voltage Suppressors Micro Packaged Diodes for ESD Protection The ESD5Z Series is designed to protect voltage sensitive components from ESD and transient
More informationPESDALC10FN5VU Low Capacitance TVS Array
PESDALC1FN5VU Low Capacitance TVS Array Description The PESDALC1FN5VU is low capacitance transient voltage suppressor array for high speed data interface that designed to protect sensitive electronics
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description Brightking s SET23AXXL02 series of transient voltage suppressor (TVS) are designed to protect components which are connected to
More informationPESDLC363T5VU ESD Protector
ESD Protector Description The protects sensitive semiconductor components from damage or upset due to electrostatic discharge (ESD) and other voltage induced transient events. They feature large cross-sectional
More informationLow Capacitance ESD Protection - SP3002 Series. Description. Features I/O 4 I/O 3. Applications
SP3002 Series 0.85pF Diode Array RoHS Pb GREEN Description The SP3002 has ultra low capacitance rail-to-rail diodes with an additional zener diode fabricated in a proprietary silicon avalanche technology
More informationSMS Volt TVS Array For ESD and Latch-Up Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Description The SMS series of TS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD, lightning, and other voltage-induced transient events. Each device will protect
More informationLCDA15C-6. Low Capacitance TVS Diode Array For Multi-mode Tranciever Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The LCDA15C6 has been specifically designed to protect sensitive components which are connected to data and transmission lines from over voltages caused by electrostatic discharge (ESD), electrical
More informationPESDNC523T5VU Low Capacitance ESD Protector
Description The is a TVS array designed to protect I/O or data lines from the damaging effects of ESD. it is low capacitance transient voltage suppressors for high speed data interface that designed to
More informationSP A Discrete Bidirectional TVS Diode
SP1233 2A Discrete Bidirectional TVS Diode RoHS Pb GREEN Description The SP1233 includes TVS diodes fabricated in a proprietary silicon avalanche technology to protect each I/O pin and provide a high level
More informationUSB-OTG BUS-Port ESD Protection for V BUS = 12 V
USB-OTG BUS-Port ESD Protection for V BUS = 12 V 6 5 4 1 2 3 MARKING (example only) 2517 Dot = pin 1 marking XX = date code YY = type code (see table below) 7 2112 XX YY DESIGN SUPPORT TOOLS click logo
More information0534S PESDR0534S2. 4-Line Low Capacitance TVS Diode Array. Mechanical Characteristics. Description. Applications. Features. Marking Information
4-Line Low Capacitance TVS Diode Array Description The is a low capacitance TVS arrays, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making
More informationSP2574NUTG 2.5V 40A Diode Array
TVS Diode Arrays (SPA Diodes 2.5V 40A Diode Array RoHS Pb GREEN Description The is a low-capacitance, TVS Diode Array designed to provide protection against ESD (electrostatic discharge, CDE (cable discharge
More informationESD9X3.3ST5G SERIES. Transient Voltage Suppressors Micro Packaged Diodes for ESD Protection
Transient Voltage Suppressors Micro Packaged Diodes for ESD Protection The ESD9X Series is designed to protect voltage sensitive components from ESD. Excellent clamping capability, low leakage, and fast
More informationRClamp0502B. Ultra-Low Capacitance TVS for ESD and CDE Protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics
- RailClamp Description RailClamps are ultra low capacitance TS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are
More informationL05ESDL5V0D3-2 SOT-323. STAND-OFF VOLTAGE Volts POWER DISSIPATION - 50 WATTS ESD PROTECTION DEVICE
LITE-ON SEMICONDUCTOR ESD PROTECTION DEVICE STAND-OFF VOLTAGE - 5.0 Volts POWER DISSIPATION - 50 WATTS GENERAL DESCRIPTION The is low capacitance TVS arrays designed to protect high speed data interfaces.
More informationWE05R. Features. Transient Voltage Suppressor IEC COMPATIBILITY (EN ) SOT-143 (Top View) Document: W , Rev: A
Document: W0005, Rev: A Transient Voltage Suppressor Features 00Watts Peak Power per Line (tp = 8/0μs) Protects two I/O lines Low operating voltage: 5V Ultra Low capacitance(
More information500 W, Bidirectional Low Capacitance TVS Array
Available 500 W, Bidirectional Low Capacitance TVS Array DESCRIPTION This Transient Voltage Suppressor (TVS) is assembled in a QFN-143 package which has the same pinout and footprint as the SOT-143 package.
More informationNP0080TA Series. Low Capacitance Protector
Low Capacitance Protector The NP series of low voltage/low capacitance overvoltage protection devices protect high speed xdsl line drivers and chipsets from both Lightning Surge and ESD events. The devices
More information