RClamp0502B. Ultra-Low Capacitance TVS for ESD and CDE Protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics
|
|
- Scott Cameron
- 5 years ago
- Views:
Transcription
1 - RailClamp Description RailClamps are ultra low capacitance TS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage caused by ESD (electrostatic discharge), CDE (Cable Discharge Events), and EFT (electrical fast transients). The RClamp TM 0502B has a typical capacitance of only 0.50pF (pin to 2). This means it can be used on circuits operating in excess of GHz without signal attenuation. They may be used to meet the ESD immunity requirements of IEC , Level 4 (±5k air, ±8k contact discharge). Each device can be configured to protect bidirectional line or two unidirectional lines. These devices are in a small SC-75 (SOT-52) package and feature a lead-free, matte tin finish. They are compatible with both lead free and SnPb assembly techniques. They are designed for use in applications where board space is at a premium. The combination of small size, low capacitance, and high level of ESD protection makes them a flexible solution for applications such as HDMI, MDDI, antenna circuits, Automatic Test Equipment, USB 2.0, and Infiniband circuits. Dimensions RClamp0502B Ultra-Low Capacitance TS for ESD and CDE Protection Features Transient protection for high-speed data lines to IEC (ESD) ±5k (air), ±8k (contact) IEC (EFT) 40A (5/50ns) Designed to replace polymer TS Protects up to two I/O lines Ultra-Low capacitance (<pf) No insertion loss to >.0GHz Low profile (<mm) Low leakage current and clamping voltage Low operating voltage: 5.0 Solid-state silicon-avalanche technology Mechanical Characteristics SC-75 (SOT-52) package Lead Finish: Matte Tin RoHS/WEEE Compliant Molding compound flammability rating: UL 94-0 Marking: P5 Packaging: Tape and Reel per EIA 48 Applications High-Definition Multimedia Interface (HDMI) Mobile Display Digital Interface (MDDI) RF/Antenna Circuits USB 2.0 & Firewire Ports GaAs Photodetector Protection HBT Power Amp Protection Infiniband Transceiver Protection Schematic & PIN Configuration BSC BSC 0.75 Revision 04/05/2005 Nominal Dimensions (mm) SC-75 L (Top iew)
2 Absolute Maximum Rating Rating Symbol alue Units Peak Peak Pulse Power (tp = 8/20µs) Pulse Current (tp = 8/20µs) P pk 25 Watts I PP 5 A ESD per IEC (Air) ESD per IEC (Contact) ESD 5 8 k Operating Temperature T J -55 to +25 C Storage Temperature T STG 55 to C Electrical Characteristics (T=25 o C) Parameter Symbol Conditions Minimum Typical Maximum Units Reverse Stand-Off oltage WM R Pin or Pin 2 to Pin and Between Pins and 2 5 Reverse Breakdown oltage B I t = ma Pin or Pin 2 to Pin and Between Pins and 2 R 6 Reverse Leakage Current I R RWM = 5, T=25 C Pin or Pin 2 to Pin and Between Pins and 2 Clamping oltage C I PP = A, tp = 8/20µ s Pin to Pin 2 Clamping oltage C I PP = 5A, tp = 8/20µ s Pin or Pin 2 to Pin Clamping oltage C I PP = 5A, tp = 8/20µ s Pin to Pin 2 Junction Capacitance C R = 0, f = j Pin to Pin 2 Junction Capacitance C R = 0, f = j Pin or Pin 2 to Pin µ A pf.2 pf 2005 Semtech Corp. 2
3 Typical Characteristics Non-Repetitive Peak Pulse Power vs. Pulse Time Power Derating Curve Peak Pulse Power - P PP (kw) Pulse Duration - tp (µs) % of Rated Power or IPP Ambient Temperature - T A ( o C) 25 Clamping oltage vs. Peak Pulse Current Pin to Pin 2 Clamping oltage vs. Peak Pulse Current Pin or Pin 2 to Pin 20 8 Clamping oltage - C () Waveform Parameters: tr = 8µs td = 20µs Clamping oltage - C () Waveform Parameters: tr = 8µs td = 20µs Peak Pulse Current - I PP (A) Peak Pulse Current - I PP (A) Normalized Capacitance vs. Reverse oltage Pin or Pin 2 to Pin Normalized Capacitance vs. Reverse oltage Pin to Pin f = NormalizedCapacitance - C j f = Reverse oltage - R () Normalized Capacitance - C j Reverse oltage - R () 2005 Semtech Corp.
4 Typical Characteristics Insertion Loss S2 (Pin to Pin 2) Insertion Loss S2 (Pin or Pin 2 to Pin ) CH S2 LOG 6 db / REF 0 db CH S2 LOG 6 db / REF 0 db :.040 db 900 : db 900 2: db.8 GHz 2:.0200 db.8 GHz : db 2.5 GHz : db 2.5 GHz 0 db 2 0 db 2-6 db -6 db -2 db -2 db -8 db -8 db -24 db -24 db -0 db -0 db -6 db 0 00 GHz GHz -6 db 0 00 GHz GHz START. 00 STOP ESD Response (4k Contact per IEC ) START. 00 STOP ESD Response (8k Contact per IEC ) Analog Crosstalk CH S2 LOG 20 db / REF 0 db START. 00 STOP Semtech Corp. 4
5 Applications Information Device Connection Options Figure. Pin Configuration This device is optimized for protection of line operating in excess of GHz. It may also be used to protect two lines operating in excess of 2.0GHz. The device is connected as follows: Protection for one line with <pf capacitance can be achieved by connecting one data line to either pin or pin 2 with the other pin connected to ground. Pin is not connected. The connection to ground should be made directly to a ground plane. The path length should also be kept as short as possible to minimize parasitic inductance. Protection of two lines is achieved by connecting data lines at pins & 2. Pin is connected to ground. The connection to ground should be made directly to a ground plane. The path length should also be kept as short as possible to minimize parasitic inductance. Matte Tin Lead Finish Matte tin has become the industry standard lead-free replacement for SnPb lead finishes. A matte tin finish is composed of 00% tin solder with large grains. Since the solder volume on the leads is small compared to the solder paste volume that is placed on the land pattern of the PCB, the reflow profile will be determined by the requirements of the solder paste. Therefore, these devices are compatible with both lead-free and SnPb assembly techniques. In addition, unlike other lead-free compositions, matte tin does not have any added alloys that can cause degradation of the solder joint Semtech Corp. 5
6 Applications Information The HDMI Compliance Test Specification (CTS) requires sink (receiver) ports maintain a differential impedance of 00 Ohms +/- 5%. The measurement is taken using a Time Domain Reflectometry (TDR) method that utilizes a pulse with a risetime <= 200ps. ESD protection devices have an inherent junction capacitance. Even a small amount of added capacitance on an HDMI port will cause the impedance of the differential pair to drop. As such, some form of compensation to the layout will be required to bring the differential pairs back within the required 00 Ohm +/- 5% range. The higher the added capacitance, the more extreme the modifications will need to be. If the added capacitance is too high, compensation may not even be possible. The RClamp0502B presents <pf capacitance between the pairs while being rated to handle >8k ESD contact discharges (>5k air discharge) as outlined in IEC As such, it is possible to make minor adjustments to the board layout parameters to compensate for the added capacitance of the RClamp0502B. Figure 2 shows how to implement the RClamp0502B in an HDMI application (transmitter and receiver). Figure shows impedance test results using a Semtech evaluation board with layout compensation. As shown, the device meets the HDMI CTS impedance requirements. A B A B X-axis (nsec) Y-axis (Ohm) Figure - TDR Measurement using Semtech Evaluation Board HDMI Transmitter HDMI Display Figure 2 - HDMI Schematic 2005 Semtech Corp. 6
7 Applications Information - Spice Model RClamp0502B Spice Model Table - RClamp0502B Spice Parameters Parameter IS B J RS IB CJO TT U nit D (TS) D2 (TS) Amp 4.4E-4 4.4E-4 olt olt Ohm Farad.8E- 2.8E- 2 Amp.0E-.0E- sec 2.54E E- 9 M N --.. EG e Semtech Corp. 7
8 Outline Drawing -SC-75 (SOT-52) A D e 2 e B E E bxn bbb C A B DIMENSIONS INCHES MILLIMETERS DIM MIN NOM MAX MIN NOM MAX A A A b c D E E e.09 BSC.00 BSC e.020 BSC 0.50 BSC L (.009) (0.22) N aaa bbb A A2 A aaa C SEATING PLANE C H SEE DETAIL A SEATING PLANE C L 0 c SIDE IEW DETAIL A NOTES:. CONTROLLING DIMENSIONS ARE IN MILLIMETERS (ANGLES IN DEGREES). 2. DATUMS -A- AND -B- TO BE DETERMINED AT DATUM PLANE -H-. DIMENSIONS "E" AND "D" DO NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. Land Pattern -SC-75 (SOT-52) X Z C G Y Y DIMENSIONS DIM INCHES MILLIMETERS C (.055) (.40) P p G X Y Z p P NOTES:. THIS LAND PATTERN IS FOR REFERENCE PURPOSES ONLY CONSULT YOUR MANUFACTURING GROUP TO ENSURE YOUR COMPANY'S MANUFACTURING GUIDELINES ARE MET Semtech Corp. 8
9 Marking Ordering Information Part Number Lead Finish Qty per Reel Reel Size P 5 RClamp0502B.TCT Pb Free,000 7 Inch RailClamp and RClamp are registered marks of Semtech Corporation Tape and Reel Specification Device Orientation in Tape Tape Width B, (Max) D D (MIN) E F K (MAX) P P0 P 2 T(MAX) W 8 mm 4.2 mm (.65) mm mm ( ).0 mm (.09).750±.0 mm (.069±.004).5±0.05 mm (.8±.002) 2.4 mm (.094) 4.0±0. mm (.57±.00-4) 4.0±0. mm (.57±.00-4) 2.0±0.05mm (.079±.002) 0.4 mm (.06) 8. mm (.2±.02) Contact Information Semtech Corporation Protection Products Division 200 Flynn Rd., Camarillo, CA 902 Phone: (805)498-2 FAX (805) Semtech Corp. 9
RClamp1502B. Ultra-Low Capacitance TVS for ESD and CDE Protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics
- RailClamp Description RailClamps are ultra low capacitance TS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are
More informationRClamp0504S RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
More informationRClamp0502A RailClamp Low Capacitance TVS Array
- RailClamp Description The RailClamp series consists of ultra low capacitance TS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
More informationRClamp0504F RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
More informationRClamp0504FA RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamp low capacitance TVS array designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
More informationRClamp2504P & RClamp3304P RailClamp 2.5V & 3.3V TVS Arrays
- RailClamp Description RailClamp is a low capacitance TS array designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
More informationRClamp0521PA. Ultra-Low Capacitance 1-Line ESD protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics
- RailClamp Description RailClamp TS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
More informationSDC36C. TVS Diode Array for Proximity Switch Input Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Description The is a highsurge transient voltage suppressor (TS) optimized for protection of sensitive digital sensors used in proximity switches and industrial control applications. The protects the components
More informationRClamp0582B. Low Capacitance RClamp ESD and EOS Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
RClamp582B Low Capacitance RClamp ESD and EOS Protection PROTECTION PRODUCTS Description The RClamp 582B transient voltage suppressor is specifically designed to protect sensitive components which are
More informationSMS Volt TVS Array For ESD and Latch-Up Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Description The SMS series of TS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD, lightning, and other voltage-induced transient events. Each device will protect
More informationRClamp0522P RClamp0524P
PROTECTION PRODUCTS - RailClamp Description RailClamps are ultra low capacitance TVS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
More informationRClamp0501T. Low Capacitance 1-Line ESD protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics.
- RailClamp Description RailClamp TS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
More informationSDC15. TVS Diode Array for ESD Protection of 12V Data and Power Lines. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The transient voltage suppressor (TVS) is designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD), electrical
More informationRClamp0551P. Ultra-Low Capacitance 1-Line, 5V ESD protection. PRELIMINARY Features. PROTECTION PRODUCTS - RailClamp Description
- RailClamp Description RailClamp TS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
More informationRClamp0504PA RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamp TVS diodes are specifically designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage caused by ESD (electrostatic
More informationRClamp7528T. Ultra Low Capacitance TVS Array. PRELIMINARY Features. PROTECTION PRODUCTS - RailClamp Description. Mechanical Characteristics
- RailClamp Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
More informationLCDA15C-6. Low Capacitance TVS Diode Array For Multi-mode Tranciever Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The LCDA15C6 has been specifically designed to protect sensitive components which are connected to data and transmission lines from over voltages caused by electrostatic discharge (ESD), electrical
More informationRClamp0524PA RClamp0522P
PROTECTION PRODUCTS - RailClamp Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed
More informationSMDA05C-7 THRU SMDA24C-7
Description The SMDAxxC-7 series of transient voltage suppressors are designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge
More informationFeatures. Applications
- MicroClamp Description The µclamp TM series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD. It is designed to replace multilayer varistors (MLVs) in portable
More informationuclamp0801t Low Profile μclamp 1-Line ESD protection PROTECTION PRODUCTS - MicroClamp Description Features Mechanical Characteristics Applications
- MicroClamp Description The μclamp series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD. It is designed to replace multilayer varistors (MLVs) in portable
More informationRClamp3374N. High Power TVS for Ethernet Interfaces. PRELIMINARY Features
PROTECTION PRODUCTS - RailClamp Description RailClamp TS diodes are specifically designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage
More informationRClamp TM 0504M RailClamp Low Capacitance TVS Diode Array PRELIMINARY Features
Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The RClamp series has been specifically designed to protect sensitive components which are connected
More informationRClamp7522T. Ultra Low Capacitance TVS Array PRELIMINARY
- RailClamp Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
More informationRClamp7524T. Low Capacitance RClamp 4-Line ESD Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Low Capacitance RClamp 4-Line ESD Protection PROTECTION PRODUCTS Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series
More informationRClamp0554S RailClamp Low Capacitance TVS Diode Array
- RailClamp Description RailClamp is a low capacitance TVS array designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
More informationRClamp3328P. Low Capacitance RClamp. 8-Line Protection PRELIMINARY
PROTECTION PRODUCTS - RailClamp Description The RClamp provides low voltage ESD protection for high-speed ports. It features a high maximum ESD withstand voltage of ±25kV contact and ±3kV air discharge
More informationRClamp3331ZA. Ultra Small RailClamp 1-Line, 3.3V ESD Protection
- RailClamp Description RailClamp TVS diodes are ultra low capacitance devices designed to protect sensitive electronics from damage or latch-up due to ESD, EFT, and EOS. They are designed for use on high
More informationRClamp0582N RailClamp Low Capacitance TVS Diode Array
- Raillamp Description Raillamp TS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
More informationSRV05-4 RailClamp Low Capacitance TVS Diode Array
Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The SR series has been specifically designed to protect sensitive components which are connected to data
More informationSMDA05C THRU SMDA24C. Bidirectional TVS Array for Protection of Four Lines. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The SMDxxC series of TS arrays are designed to provide bidirectional protection for sensitive electronics from damage or latchup due to ESD, lightning and other voltageinduced transient events.
More informationFeatures. Applications
Description are surge rated diode arrays designed to protect high speed data interfaces. The SR series has been specifically designed to protect sensitive components which are connected to data and transmission
More informationuclamp2512t Lightning and ESD Protection for Gigabit Ethernet Interfaces PROTECTION PRODUCTS - MicroClamp Description Features
- MicroClamp Description The μclamp 5T TVS diode is specifically designed to meet the performance requirements of Gigabit Ethernet interfaces. They are designed to protect sensitive PHY chips from damage
More informationRClamp5011ZA. Ultra Small RClamp 1-Line, 5V ESD Protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics
- RailClamp Description RClamp TVS diodes are designed to protect sensitive electronics from damage or latch-up due to ESD. They are designed to replace 21 size multilayer varistors (MLVs) in portable
More informationTClamp1202P. Low Capacitance TClamp Surge Protection for 12V Interfaces. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
TClamp122P Low Capacitance TClamp Surge Protection for 12V Interfaces PROTECTION PRODUCTS Description TClamp 122P provides dedicated surge and ESD protection for RS-485 and other 12V lines in industrial
More informationUM5204EEBF. Quad Channel Low Capacitance ESD Protection Array UM5204EEAF SC70-6/SC88/SOT363 UM5204EECF TSOP-6/SOT23-6. General Description
Quad Channel Low Capacitance ESD Protection Array UM5204EEAF SC70-6/SC88/SOT363 UM5204EEBF SC89-6/SOT563/SOT666 UM5204EECF TSOP-6/SOT23-6 General Description are surge rated diode arrays designed to protect
More informationUM5304EEBF. Quad Channel Low Capacitance ESD Protection Array UM5304EEAF SC70-6/SC88/SOT363 UM5304EECF TSOP-6/SOT23-6. General Description
Quad Channel Low Capacitance ESD Protection Array UM5304EEAF SC70-6/SC88/SOT363 UM5304EEBF SC89-6/SOT563/SOT666 UM5304EECF TSOP-6/SOT23-6 General Description UM5304EEXF are surge rated diode arrays designed
More informationSM05G. Low Capacitance Quad Line ESD Protection Diode Arry SM05/G SOT23-3. General Description. Rev.02 Nov.
Low Capacitance Quad Line ESD Protection Diode Arry SOT23-3 General Description The of transient voltage suppressors (TVS) are designed to protect components which are connected to data and transmission
More informationUM5204EECE. Quad Channel Low Capacitance ESD Protection Array. General Description. Rev.03 Dec /6
Quad Channel Low Capacitance ESD Protection Array TSOP-/SOT3- General Description is surge rated diode arrays designed to protect high speed data interfaces. This series has been specifically designed
More informationHigh Power µclamp 3.3V ESD & Surge Protection
High Power µclamp 3.3V ESD & Surge Protection PROTECTION PRODUCTS Description µclamp TVS diodes are designed to protect sensitive electronics from damage or latch-up due to EOS, lightning, CDE, and ESD.
More informationRClamp3324T PRELIMINARY. PROTECTION PRODUCTS Absolute Maximum Rating. Electrical Characteristics (T=25 o C Unless Otherwise Specified) I PP V R
- RailClamp Description The RClamp 3324T provides ESD protection for USB3., HDMI.3/.4, and other high-speed ports. It features a high maximum ESD withstand voltage of ±25kV contact and ±3kV air discharge
More informationTVS/ESD Arrays. RLST23AxxxV Series. Circuit Protection System ELECTRONICS
ELECTRONICS TVS/ESD Arrays RLST23AxxxV Series TVS/ESD Arrays - RLST23AxxxV Series Features 350 Watts peak pulse power (tp = 8/20μs) Two devices protect two high-speed line pairs Low leakage current Low
More informationSRV05-4L. Ultra Low Capacitance Array for ESD Protection. Features. Description. Main applications. Protection solution to meet. Ordering Information
Ultra Low Capacitance Array for ESD Protection Description The provides a typical line to line capacitance of 0.80pF and low insertion loss up to 3GHz providing greater signal integrity making it ideally
More informationSTF701. T-Filter with TVS Diode Array For EMI Filtering and ESD Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The STF701 is a low pass T-filter with integrated TVS diodes. It is designed to provide bi-directional filtering of unwanted EMI/RFI signals and electrostatic discharge (ESD) protection in
More informationuclamp0511z Ultra Small μclamp 1-Line ESD protection PROTECTION PRODUCTS - Z-Pak TM Description Features Mechanical Characteristics Applications
- Z-Pak TM Description μclamp TVS diodes are designed to protect sensitive electronics from damage or latch-up due to ESD. It is designed to replace 020 size multilayer varistors (MLVs) in portable applications
More informationPESDR0554S2. 4-Line Low Capacitance TVS Diode Array. Mechanical Characteristics. Description. Applications. Features. Ordering Information
4-Line Low Capacitance TVS Diode Array Description The is a low capacitance TVS array, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making
More informationWE05R. Features. Transient Voltage Suppressor IEC COMPATIBILITY (EN ) SOT-143 (Top View) Document: W , Rev: A
Document: W0005, Rev: A Transient Voltage Suppressor Features 00Watts Peak Power per Line (tp = 8/0μs) Protects two I/O lines Low operating voltage: 5V Ultra Low capacitance(
More informationRClamp3346P. Low Capacitance RClamp 6-Line ESD Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Low Capacitance RClamp 6-Line ESD Protection PROTECTION PRODUCTS Description The RClamp provides ESD protection for highspeed data interfaces. It features a high maximum ESD withstand voltage of ±17kV
More informationWS05R. Features SOT-143. Transient Voltage Suppressor IEC COMPATIBILITY (EN ) Pin 4. Pin 3. Pin 2. Pin 1 SOT-143 (Top View)
Document: W, Rev: C Transient Voltage Suppressor Features 5 Watts Peak Power per Line (tp = 8/μs) Protects two I/O lines Low operating voltage: 5V Ultra Low capacitance(
More information0504A PESDR0504S2. 4-Line Low Capacitance TVS Diode Array. Mechanical Characteristics. Description. Applications. Features. Marking Information
4-Line Low Capacitance TVS Diode Array Description The is a low capacitance TVS array, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making
More informationRClamp3324P. Low Capacitance RailClamp 4-Line Surge and ESD Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Low Capacitance RailClamp 4-Line Surge and ESD Protection PROTECTION PRODUCTS Description RailClamp provides ESD protection for highspeed data interfaces. It features a high maximum ESD withstand voltage
More informationEClamp2410P. ESD Protection Device for T-Flash/MicroSD Interfaces PRELIMINARY. PROTECTION PRODUCTS - EMIClamp TM Description.
- EMIClamp TM Description The EClamp TM 240P is a combination EMI fi lter and line termination device with integrated TVS diodes for use on Multimedia Card interfaces. This state-of-the-art device utilizes
More information0534S PESDR0534S2. 4-Line Low Capacitance TVS Diode Array. Mechanical Characteristics. Description. Applications. Features. Marking Information
4-Line Low Capacitance TVS Diode Array Description The is a low capacitance TVS arrays, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making
More informationRClamp0532T. Low Capacitance RailClamp 2-Line Surge and ESD Protection for Ethernet Interfaces. PROTECTION PRODUCTS Description.
PROTECTION PRODUCTS Description RClamp 53T is a high performance TVS array designed to protect two differential lines from overvoltage events caused by ESD, lightning, CDE (Cable Discharge Events) and
More informationEClamp2422N. ESD/EMI Protection for Audio Interfaces PRELIMINARY
PROTETION PRODUTS - EMIlamp TM Description The Elamp TM 2422N is a (-L-) low pass filter array with integrated TVS diodes. It is designed to suppress unwanted EMI/RFI signals and provide electrostatic
More informationSingle Line ESD Protection Diode Array
General Description Single Line ESD Protection Diode Array SOD523 The ESD protection diode is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers,
More informationPSLC03 - PSLC24C. 350 watt low capacitance tvs array. applications
350 watt low capacitance tvs array Description The PSLC and PSLCxxC Series of devices are low capacitance TVS arrays available in a SOT-3 package. These devices are designed to protect Ethernet data I/O
More informationESDA6V8UF. Description: Specification Features: Applications. Mechanical Characteristics. Order information. Transil array for data protection
ESDA6V8UF Transil array for data protection http://www.willsemi.com Description: The ESDA6V8UF is 4-channel very low capacitance ESD transient voltage suppressor which provides a very high level of protection
More informationDATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER UDD32CXXL01 series
Product specification November 05, 2018 V.0 DATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER series RoHS compliant & Halogen free 2 Electrostatic Discharged Protection Devices
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description Brightking s SDT23CXXL02 series are designed to protect sensitive electronics from damage or latch-up due to ESD and other voltage
More informationEClamp2455P. ESD/EMI Protection for SIM Card PRELIMINARY. PROTECTION PRODUCTS - EMIClamp TM Description. Features. Mechanical Characteristics
- EMIlamp TM Description The Elamp TM 2455P is combination EMI filter and line termination device with integrated TVS diodes for use on SIM ard interfaces on cellular phones and other portable electronics.
More informationSLVU WATT ULTRA LOW CAPACITANCE TVS ARRAY PIN CONFIGURATION
600 WATT ULTRA LOW CAPACITANCE TVS ARRAY Description The is a low voltage, low leakage current and ultra low capacitance TVS device designed for EOS and ESD protection of low voltage circuits commonly
More informationPSLC03 - PSLC24C. 350 watt low capacitance tvs array. applications
350 watt low capacitance tvs array Description The PSLC and PSLCxxC Series of devices are low capacitance TVS arrays available in a SOT-3 package. These devices are designed to protect Ethernet data I/O
More informationAOZ8900. Ultra-Low Capacitance TVS Diode Array PRELIMINARY. Features. General Description. Applications. Typical Application
Ultra-Low Capacitance TS Diode Array General Description The is a transient voltage suppressor array designed to protect high speed data lines from Electro Static Discharge (ESD) and lightning. This device
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description Brightking s SET23AXXL02 series of transient voltage suppressor (TVS) are designed to protect components which are connected to
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description Brightking s component is surge rated diode array designed to protect high speed data line interfaces. It has been specifically
More informationCitrusCom CS0806U. Features. Applications. Mechanical Characteristics. Description. Circuit Diagram. Pin Configuration
Features Transient protection for high-speed data lines IEC 1000--2 (ESD) ±1kV (Air) ±8kV (Contact) IEC 1000-- (EFT) 0A (/0 ns) Cable Discharge Event (CDE) Small package (2.9mm 2.8mm 1.mm) Protects four
More informationCitrusCom CS0801S. Applications. Features. Mechanical Characteristics. Description. Circuit Diagram. Pin Configuration
Features Transient protection for high-speed data lines IEC 61000-4-2 (ESD) ±15kV (Air) ±8kV (Contact) IEC 61000-4-4 (EFT) 40A (5/50 ns) Cable Discharge Event (CDE) Package optimized for high-speed lines
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description The series of is designed to protect power port and the chip Vbus interfaces. It has been specifically designed to protect sensitive
More informationPLC497 ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SOT-23 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is an ultra low capacitance steering diode/tvs array. Designed for protection against Electrostatic Discharge (ESD), Electrical Fast Transients
More informationPSOT03LC - PSOT36LC 500 WATT ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION SOT-23 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
500 WATT ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The PSOTxxLC series are ultra low capacitance transient voltage suppressor (TVS) arrays, designed for power or data line applications that provide protection
More informationSFC05-4 ChipClamp ΤΜ Flip Chip TVS Diode Array PRELIMINARY Features
Description The SFC05-4 is a quad flip chip TVS array. They are state-of-the-art devices that utilize solid-state siliconavalanche technology for superior clamping performance and DC electrical characteristics.
More informationµclamp3321za Ultra Small µclamp 1-Line, 3.3V ESD Protection PROTECTION PRODUCTS - µclamp Description Features Mechanical Characteristics Applications
- µclamp Description µclamp TVS diodes are designed to protect sensitive electronics from damage or latc-up due to ESD. Tey are designed to replace 1 size multilayer varistors (MLVs) in portable applications
More informationWE05R. Features. Transient Voltage Suppressor IEC COMPATIBILITY (EN ) Pin 4. Pin 3. Pin 2. Pin 1 SOT-143 (Top View) Document: W , Rev: B
Document: W5, Rev: B Transient Voltage Suppressor Features Watts Peak Power per Line (tp = 8/μs) Protects two I/O lines Low operating voltage: 5V Ultra Low capacitance(
More informationPLCDA03C-6 - PLCDA15C-6
5 WATT MULTI-LINE LOW CAPACITANCE TVS ARRAY Description The PLCDAxxC-6 Series are low capacitance multi-line transient voltage suppressor arrays that provides board level protection for standard TTL and
More informationApplications. Keypads Side Keys,LCD Displays IEC (ESD) immunity test Air discharge: ±30kV Contact discharge: ±30kV
1-Line Low Capacitance Bi-directional TVS Diode Description The is a bi-directional TVS diode, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage,
More informationCP05 - CP24C MULTI-LINE TVS ARRAY PIN CONFIGURATIONS
MULTI-LINE TVS ARRAY Description The CPxx and CPxxC series are subminiature monolithic TVS suppressor arrays designed for the protection of sensitive IC components from the damaging effects of Electrostatic
More informationUM5075/5079 Single Line ESD Protection Diode Array UM5075 SOD523 UM5079 DFN General Description Applications Features
General Description Single Line ESD Protection Diode Array UM5075 SOD523 UM5079 DFN2 1.0 0.6 The ESD protection diode is designed to replace multilayer varistors (MLVs) in portable applications such as
More informationPLC WATT ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION SO-8 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
00 WATT ULTRA LOW CAPACITAE TVS ARRAY DESCRIPTION The is an ultra low capacitance TVS array that provides two lines of protection. This device protects high-frequency applications such as voice and data
More informationSRV05-4. ultra low capacitance steering diode/tvs array. Description. sot-23-6 package. applications
ultra low capacitance steering diode/tvs array Description The is a dual USB port protection array that features ultra low capacitance. This device can be used in applications such as video cards, SMART
More informationPSR3.3. ultra low capacitance steering diode/tvs array. Description. applications
ultra low capacitance steering diode/tvs array Description The is an ultra low capacitance (typically 1.5pF), transient voltage/steering diode suppressor array. This device provides circuit protection
More informationST0561D4. 1-Line Bi-directional TVS Diode. Description. Mechanical Characteristics. Applications. Features. Ordering Information
-Line Bi-directional TVS Diode Description The ST56D4 is a bi-directional TVS diode, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making this
More informationPLR ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SC-89 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is an ultra low capacitance (0.7pF Max. I/O to I/O) steering diode and TVS array combo. This device provides circuit protection for interfaces
More informationUESD6V8L1F. Low Capacitance Single Line ESD Protection Diode Array UESD6V8L1F DFN General Description
Low Capacitance Single Line ESD Protection Diode Array DFN2 1.0 0.6 General Description The ESD protection diode is designed to replace multilayer varistors (MLVs) in portable applications such as cell
More informationAZ H Transient Voltage Suppressing Device For ESD/Transient Protection. Features. Circuit Diagram / Pin Configuration. Applications.
Features ESD Protection for Line with Bi-directional. Provide ESD protection for the protected line to IEC 6000-4- (ESD) ±0kV (air), ±kv (contact) IEC 6000-4-4 (EFT) 40A (5/50ns) IEC 6000-4-5 (Lightning)
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description is surge rated diode arrays designed to protect high speed data interfaces. It has been specifically designed to protect sensitive
More informationAQ24CANFD 200W TVS Diode Array
AQ24CANFD 200W TVS Diode Array RoHS Pb GREEN Description The AQ24CANFD is designed to protect automotive Controller Area Network (CAN lines from damage due to electrostatic discharge (ESD, electrical fast
More informationL05ESDL5V0D3-2 SOT-323. STAND-OFF VOLTAGE Volts POWER DISSIPATION - 50 WATTS ESD PROTECTION DEVICE
LITE-ON SEMICONDUCTOR ESD PROTECTION DEVICE STAND-OFF VOLTAGE - 5.0 Volts POWER DISSIPATION - 50 WATTS GENERAL DESCRIPTION The is low capacitance TVS arrays designed to protect high speed data interfaces.
More informationAOZ8101. Ultra-Low Capacitance TVS Diode Array. General Description. Features. Applications. Typical Application
Ultra-Low Capacitance TS Diode Array General Description The AOZ8101 is a transient voltage suppressor array designed to protect high speed data lines from Electro Static Discharge (ESD) and lightning.
More information500 W, Bidirectional Low Capacitance TVS Array
Available 500 W, Bidirectional Low Capacitance TVS Array DESCRIPTION This Transient Voltage Suppressor (TVS) is assembled in a QFN-143 package which has the same pinout and footprint as the SOT-143 package.
More informationTVS/ESD Arrays. RLST23A712C Series. Circuit Protection System ELECTRONICS
ELECTRONICS TVS/ESD Arrays RLST23A712C Series TVS/ESD Arrays - RLST23A712C Series Features 400 Watts Peak Pulse Power per Line (tp = 8/20μs) Protects two +12V to -7V lines Low Leakage Current Low operating
More informationSRV05-4A. Green Products. Description. Features. China - Germany - Korea - Singapore - United States - smc-diodes.
Description The SRV05-4A is a low capacitance TVS (Transient Voltage Suppressor) array designed to protect sensitive semiconductor components from electrical overstress when interfaced to high-speed data
More informationSP pF SOT23-6L 4 Channels Diode Array
SP319.3pF SOT23-6L 4 Channels Diode Array RoHS Pb GREEN Description 4 5 6 3 2 1 SP312-3UTG Pinout *Pins 6, 7, 9, 1 are not internally connected but should be connected to the trace. 6 7 8 9 1 5 4 3 2 1
More informationAZ H Transient Voltage Suppressing Device For ESD/Transient Protection. Features. Circuit Diagram / Pin Configuration. Applications.
Features ESD Protection for 1 Line with Bi-directional. Provide ESD protection for the protected line to IEC 61000-4- (ESD) ±16kV (air), ±16kV (contact) IEC 61000-4-4 (EFT) 50A (5/50ns) IEC 61000-4-5 (Lightning)
More informationSP2574NUTG 2.5V 40A Diode Array
TVS Diode Arrays (SPA Diodes 2.5V 40A Diode Array RoHS Pb GREEN Description The is a low-capacitance, TVS Diode Array designed to provide protection against ESD (electrostatic discharge, CDE (cable discharge
More informationLCD05C - LCD24C HIGH POWERED MULTI-LINE TVS ARRAY DESCRIPTION 16 PIN DIP PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
HIGH POWERED MULTI-LINE TVS ARRAY DESCRIPTION The LCD Series are high powered multi-line TVS arrays available in a 16 pin DIP package. This series is designed to protect high-speed applications from the
More informationPSM WATT TVS ARRAY - ASYMMETRICAL DATA LINE PROTECTOR PIN CONFIGURATION
600 WATT TVS ARRAY - ASYMMETRICAL DATA LINE PROTECTOR Description The is an asymmetrical transient voltage suppressor (TVS) array, designed specifically for RS-485 applications. This device provides protection
More informationSRV05-4 ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SOT-23-6 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is a dual USB port protection array that features ultra low capacitance. This device can be used in applications such as video cards, SMART
More informationAOZ8234. Four-line TVS Diode
AOZ8 Four-line TS Diode General Description The AOZ8 is a transient voltage suppressor diode array designed to protect data lines from high transient conditions and ESD. This state-of-the-art device utilizes
More informationDSL03-24T ULTRA LOW CAPACITANCE STEERING DIODE/THYRISTOR ARRAY DESCRIPTION SOT-23-6 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
ULTRA LOW CAPACITANCE STEERING DIODE/THYRISTOR ARRAY DESCRIPTION The provides ESD, EFT and surge protection for high-speed data interfaces. The 24V thyristor array, steering diode combination device meets
More information