Magnetic Contacts Introduction

Transcription

1 Magnetic Contacts Introduction Elmdene offer an extensive range of high quality magnetic contacts for intruder and access control systems. Including the CPNI Approved 3 EN3-RSA and High Security VS303. Key product features are outlined below. Terminal Contacts ironmental II Surface and flush versions available Supplied fitted with resistors of your choice for FSL systems Can be used in double pole systems (please check product specification) Quality spring action micro switch provides reliable tamper protection Can be configured for single or multiple doors d Contacts ironmental III Surface and flush versions available Supplied fitted with resistors of your choice for FSL systems Potted providing life-long protection against the ingress of moisture 4 wire contacts are suitable for double pole systems 6 wire contacts include internal resistors for use in FSL systems as well as double pole systems Can be configured for single or multiple doors Integral Resistors Where contacts are supplied with integral resistors, a colour code is used to make it easy for you to match them to your chosen control panel. Just add the relevant colour code to the end of the part number eg QST-RD or 6RSC-GN. Resistors Colour Code Control Panels 4k7/k Red RD ADE, Bosch, Castle, Dycon, Menvier, Pyronix, Scantronic, Texecom 1k/1k Green GN Honeywell, Galaxy 8k/8k Blue BL Guardall 4k7/4k7 Grey GY Aritech, HKC, Siemens 6k8/4k7 Purple PU GardTec k/k Yellow YL Europlex 5k6/5k6 Orange OR DSC k/10k Brown BRN Texecom Veritas

2 Contacts 1 & Flush 1 & Flush QF-5 1 / Terminal 16 Flange Body diameter Depth 36 x Elmdene has an extensive range of high quality flush magnetic contacts providing a choice of both cabled or terminal contacts within these ranges. QFT RFT II Terminal N/A x x Flush mouting FSL and Double Pole Screw & pin fixing options Available in white or brown IP43 and IP67 rated versions 6QFC 6FM B 100cm 0 36 x x M III d PD666: EN :006 EN :008 F Contact us for details N/A 7.5 BP 18 8 MDP 0 8 x 38 1

3 Contacts Surface Plastic Surface, Plastic QST / Terminal 0 70 x 17 x 15 Range of high quality, ABS surface magnetic contacts available as cabled or terminal devices. MST x 19 x 19 LST II Terminal N/A x 5 x 5 For full product specifications, please visit the Elmdene website. Surface mounting Available in white or brown FSL and double pole Ideal for single or multiple doors IP43 and IP67 rated versions PD666:010 EN :006 EN :008 NfaP (SHD) SHD 1 61 x 3 x 13.5 SHD x 3 x 13.5 S x 14 x 8.5 Contact SL III d us for 0 70 x 17 x 15 details PHD x 0 x 1 Not sure which Contact to use? Use our simple product selector to find out: Visit: /downloads 3

4 Contacts Surface Metal Surface, Metal VHDA / Terminal II Terminal N/A x 5 x 5 A wide range of metal surface contacts. SM Contact us for details x 16 x 9.5 For full product specifications, HD 80 x 19 x 1.5 please visit the Elmdene website. 5 Surface mounting FSL and double pole Ideal for single or multiple doors IP43 and IP67 rated versions HD-SO 80 x 3 x 45 RSC III d 175 x 5 x cm 55 RSA 150 x 40 x 14 RSM x 5 x 15 PD666:010 EN :006 EN :008 RSL x 40 x 15 4

5 Contacts 3 3 EN3-QFC Mounting Flush 13 Flange 36 x.5 Body dia 0 depth 15 EN3-QSC x 17 x 15 Elmdene offer a range of 3 surface and flush mounted contacts. All units are cabled with a 1m flying lead. 3 III 100cm EN3-LSC Surface 7 93 x 5 x 5 For full product specifications, please visit the Elmdene website. FSL and double pole IP67 rated Immune to magnetic interference (RSA model has detection) Spacers available for use when contacts are mounted on ferrous metal surfaces EN3-RSA CPNI Approved * see also high security range PD66:010 EN :006 EN :008 CPNI ref EN3-RSA - Contact CPNI for details x 40 x 14 Elmdene s EN3 3 Magnetic Contacts provide compliance to EN :008 primarily through Magnetic Immunity, as opposed to Magnetic Detection. This ensures our Contacts are: Simple to install Reliable and consistent in operation Do not generate random magnetic detection/tamper faults Genuinely compliant ensuring the integrity of your systems 5

6 s Contacts High Security High Security FMBR Mounting Flange 57 x 3 Body dia 5 Depth Flush 5 This range is designed for high security applications. VS105 50cm Flange 98.5 x x 10 x For full product specifications, please visit the Elmdene website. HSI 7 39 x 0 x 9 HDBR 80 x 19 x 1.5 Ideal for single or multiple doors d IP67 rated Detection of magnetic field interference Active/passive tamper (model dependent) III 17 HDBR-SO 80 x 3 x 45 Surface VS 100cm 175 x 5 x VS x 38 x 19 PD666:010 EN :006 EN :008 CPNI ref VS303 - Contact CPNI for details VS303 CPNI Approved x 38 x 19 6