Solid State Relays and Timers Family

Transcription

1 Solid State Relays and Timers Family Vehicle Control Modules Waytek Stock No. Volt Rating Amp Rating Notes Dual Input Relay Activating either Input A or Input B sets output Dual inputs Latching Relay Activating either Input A or Input B alternately latches output Dual inputs Dual inputs On-Delay Timer Relay Output is set a time delay after either Input A or Input B is activated. Output is reset after the input is deactivated Seconds. Dual inputs Seconds. Dual inputs Minutes. Dual inputs Minutes. Dual inputs Minutes. Dual inputs Off-Delay Timer Relay Output is set when either Input A or Input B is activated. Output is reset a time delay after the input is deactivated Seconds. Dual inputs Seconds. Dual inputs Minutes. Dual inputs Minutes. Dual inputs Minutes. Dual inputs One-Shot Timer Relay When either Input A or Input B is activated, output is set for a time delay. Output will be timed on regardless of length of input activation Seconds. Dual inputs Seconds. Dual inputs Minutes. Dual inputs Minutes. Dual inputs Minutes. Dual inputs Flasher Relays When Input is activated the dual outputs alternately flash at 75 flashes per minute at 50% duty cycle (dual) Input is ground actuated Application Generally used on trucks, buses, coaches, agricultural equipment, recreational equipment, specialty vehicles, marine and construction equipment. Features Typical VCM Timer Relay Operating temperature is -40 C to +85 C High quality solid state relays Relays have outputs rated at 15 amps. Most modules have dual inputs. Input A is +12 volt actuated; Input B is grounded actuated. Durable sealed metal case. Panel-mount bracket integral to case. Time delay settings are set with single turn screw driver adjustment. Wiring connections are standard automotive 1/4 inch female terminals. Power outputs provide over current fault shut down protection. Operating voltage is 8 to 16 Vdc. Circuitry Dimensions

2 75532 Dual Input Relay

3 75533 Latching Relay

4 75534 Latching Relay Features Circuitry Single amp output Module has two inputs, one actuated by a transition to +24 volts (Input A) and one actuated by a transition to ground (Input B). The two inputs operate as a logical Exclusive OR so that either input can cause the output to latch (or unlatch). Output will toggle to the opposite state when +24 volts is applied to Input A while Input B is open, or when ground is applied to Input B when Input A is open. To toggle the module s output, a control input signal must be applied for at least 250 milliseconds with its counterpart input before the module will recognize another toggle control input. When +24 volts is first applied to its power terminal (86) the module will initialize in the output-off state. The output is rated at amps and provides over current and short circuit shut down protection.

5 On-Delay Timer Relay On-Delay Timer Relay Output is set a time delay after either Input A or Input B is activated. Output is reset after the input is deactivated Seconds. Dual inputs Seconds. Dual inputs Minutes. Dual inputs Minutes. Dual inputs Minutes. Dual inputs Updated 7/06/2010 8/01/2010

6 Off-Delay Timer Relay Off-Delay Timer Relay Output is set when either Input A or Input B is activated. Output is reset a time delay after the input is deactivated Seconds. Dual inputs Seconds. Dual inputs Minutes. Dual inputs Minutes. Dual inputs Minutes. Dual inputs

7 One-Shot Timer Relay One-Shot Timer Relay When either Input A or Input B is activated, output is set for a time delay. Output will be timed on regardless of length of input activation Seconds. Dual inputs Seconds. Dual inputs Minutes. Dual inputs Minutes. Dual inputs Minutes. Dual inputs

8 Flasher Relay Flasher Relays When Input is activated the dual outputs alternately flash at 75 flashes per minute at 50% duty cycle (dual) Input is ground actuated