The Quality Connection. Perfect fiber optic network

Transcription

1 The Quality Connection Perfect fiber optic network

2 The Quality Connection LEONI The Quality Connection LEONI NBG Fiber Optics GmbH is an internationally recognised systems supplier offering customer-oriented solutions especially for the passive infrastructure of fiber optic telecommunications networks. Our Company was founded in 1996 in Gmünd, Austria, by experts experienced in this field of fiber optic technology, and has since then been continually expanded. Since 2006, the Company has belonged to the LEONI Group, which is among world s largest and most successful manufacturers of wires, cables and wiring systems. LEONI NBG Fiber Optics GmbH now has a team of expert staff who are devoted to one subject above all: FTTH fiber to the home. Our day-to-day tasks include conceptualising and planning project-specific system solutions. The fiber optic components required for this are future-assured, easy and time-saving to handle as well as geared and developed most precisely to what the project needs. Our major advantage lies in the comprehensive experience of numerous projects successfully executed both in the domestic and international markets and from which our customers have, without exception, benefited.

3 The Quality Connection 3 Content Page LEONI The Quality Connection LEONI to the Home 4 Pigtails Patchcords Adaptors 6 Couplers WDM Attenuators 18 Modular Cable System 22 Handhole L 32 Street Cabinet 36 Fiber Optic Cable 42 Rack System A Shelves 48 Rack System 1 56 Rack System 3 66 Closures 72 Distribution Boxes 84 Termination Boxes 92 Cable Stores 116 Accessories 122 Tools 128 Assembly & Service 134 Product overview 136 The latest from LEONI 138

4 4 LEONI to the Home LEONI to the Home reaching out an experienced hand Access Node (or POP) 1 Our customers benefit from LEONI s unique all-in support, which begins in the acceptance and definition phase of each project. A project management team provides the customer with feasibility and design studies on the architecture, the business model and execution phase of the network. Based on these planning results, the customer has a list of components and installation steps required, which form the basis for selection of suppliers as well as RFI Request for Information and RFQ Request for Quotation. During the planning and execution phases, which represent the next steps of a projects, a project and construction management team as well as the highly experienced installation teams will provide the support. They offer the customer services such as project and construction management, monitoring of the infrastructure installation such laying and connecting empty tube systems, blowing in of the fiber optic cables and fiber units, splicing of the fibers, installation of the ODF (Optical Distribution Frame), the connecting, branching off, division and customer connection boxes, commissioning of the active equipment as well as measuring and documenting the fiber optic network route, which can be built according to the customer s specific requirements. 1 Rack System 3

5 LEONI to the Home 5 Customer Premises Equipment 6 Fiber Concentration Point Internal Cabling Customer Premises Equipment 2 Feeder Cabling, Distribution Cabling, Drop Cabling 4 Customer Branch Off-Closure 2 3 Installation and Service Team Modular Cable Fiber Optic Cable Street Cabinet Handhole Closures Splice Management Closures Tube Management Distribution Boxes Termination Boxes Termination Boxes

6 6 Pigtails Patchcords Adaptors Pigtails Patchcords Adaptors Pigtails Patchcords Adaptors Fiber optic cords, duplex cables, breakout cables and adaptors are used to create patch connections for fiber optics. To ensure that these connections have low insertion loss and high return loss, the components must be manufactured and finished with great care and precision. When assembling fiber optic connectors, the polishing processes must be monitored very closely to ensure that high surface quality is achieved. This ensures that the connections will function reliably, even after frequent use. Fiber optic cords, duplex cable, breakout cables and adaptors have been tested and approved by well-known network operators in the domestic and foreign markets. Features n low insertion loss n high return loss n high surface quality n maximum reliability

7 Pigtails Patchcords Adaptors 7 SM connectors Applies to all SM connectors: 9/125 µm singlemode fiber zirconia ferrule UPC polishing average values measured against master connector; FC/PC: Insertion loss IL 0.08 db Return loss RL > 52 db (UPC) RL > 70 db (8 APC) insertion loss minimised by adjusting FC/PC, E2000 and E2000HRL type connector MM connectors Applies to all MM connectors: 50/125 µm or 62.5/125 µm multimode fiber zirconia ferrule PC polishing average values measured against master connector ST: Insertion loss IL < 0.15 db 900 µm semi-tight glass fibers Glass fiber (Ø 125 µm) with a primary coating (Ø 250 µm) and a semi-tight secondary coating (Ø 900 µm) around it. This results in high resistance to kinking, small bending radii and good stripping characteristics of the cord (min. 1 m in one go). Description 900 µm semi-tight fiber optic cords are singlemode or multimode glass fibers with an acrylic primary coating (directly on the Ø 125 µm fiber), which are inserted in a jelly-filled, single fiber loose buffer. This buffer has a diameter of 900 µm. The desired fiber optic connector is attached to the pigtail at the factory. The finished 900 µm semi-tight fiber optic cords are spliced directly to the optical fibers of the cable. Application 900μm semi-tight fiber optic cords are used only to attach a connector to cable ends, which means pigtails are suitable only for use inside splice boxes. They are not used to make patch connections (in cable ducts or cabinets). Specifications: diameter: 900 µm colour of buffer tube: singlemode 9/125 µm multimode 50/125 µm multimode 62.5/125 µm min. bending radius: 30 mm max. tensile load: 5 N yellow orange white

8 8 Pigtails Patchcords Adaptors Simplex fiber optic cord Simplex fiber optic cord is a 900 μm semi-tight fiber optic cord with a non-metallic strain relief (aramid threads) and an LSZH outer jacket of 1.8, 2.4 and 3.0 mm diameter around it. Outer jacket Fixed core or semi-loose full core Strain relief elements Application Assembly Due to their mechanical stability, Simplex fiber optic cords can be installed in cabinets, boxes, closures and, with some restrictions, in cable ducts. But they must not be pulled or blown in. Simplex cords assembled at both ends are used to make patch connections in closures and cabinets. LEONI will fit the desired connector to one or both ends of the Simplex cord simplex cords assembled at one end may be spliced directly to the fiber optic cable Specifications: diameter: 1.8 / 2.4 / 3.0 mm strain relief: aramid threads jacket colour: SM 9/125 µm yellow MM 50/125 µm orange/blue MM 62.5/125 µm grey/orange min. bending radius: 30 mm max. tensile load: 100 N 1.8 and 2.4 mm 135 N 3.0 mm Duplex fiber optic cable Two simplex fiber optic cords that are surrounded by a common outer jacket. Outer jacket Single jacket Fixed core or semi-loose full core Strain relief elements Application Assembly Due to their mechanical stability, duplex fiber optic cords can be installed in cabinets, boxes, closures and, with some restrictions, in cable ducts. But they must not be pulled or blown in. Duplex cables are used to make patch connections in boxes, closures and cabinets. LEONI will attach the desired fiber optic connectors at both ends of duplex cables Specifications: dimensions (h x w): 3.0 x 6.0 mm strain relief: aramid threads jacket colour: SM 9/125 µm yellow MM 50/125 µm orange/blue MM 62.5/125 µm grey/orange min. bending radius: 30 mm max. tensile load: 300 N

9 Pigtails Patchcords Adaptors 9 Breakout Cable 2, 4 or 8 simplex fiber optic cords of 2.1 mm diameter that are surrounded by a common outer jacket. Breakout cable with 8 fibers additionally has a central support element. Application Breakout cables are used to make patch connections with 2 to 8 fibers. Outer jacket Single jacket Fixed core or semi-loose full core Strain relief elements Due to their construction (simplex cord + common outer jacket) breakout cables can be pulled up to approx. 50 m. In this case the fitted connectors must be protected with a pull protector per cable end. Specifications: jacket colour: SM 9/125 µm yellow MM 50/125 µm orange/blue MM 62.5/125 µm grey/orange No. of fibers nom. cable dia max. weight min. bending radius max. tensile force max. crush resistance max. crush resistance, short term (N/cm) max. fire load Pre-connected fiber Units 2 or 4 fiber units with connectors fitted to one end. Application Pre-connected fiber units can be blown in directly and without splices from A to B. Assembly LEONI will fit the desired connector to one end of the pre-connected fiber unit Specifications: Fiber to the Home/Customer/Desk Reduction of splice and access points Enhanced Performance Fiber Unit (EPFU) with 2 and 4 fibers singlemode G652 and G655, multimode 50/125 and 62.5/125 special coating (low frictional resistance)

10 10 Pigtails Patchcords Adaptors FC/PC Connector Brief description locks with coupling ring metal casing with zirconia ferrule 100 % adjustment and testing on optical power meter tuned for minimum insertion loss IEC 874 compliant colour of boot: black (others on request) Specifications SM and MM insertion loss SM: IL < 0.08 db average (to reference connector) IL < 0.20 db max. (to reference connector) return loss SM: > 52 db (SM) UPC polishing for cord diameter of 0.9 mm and 2.8 to 3 mm FC/APC Connector Brief description locks with coupling ring metal casing with zirconia ferrule IEC 874 compliant colour of boot: green Specifications SM 8 angled polishing insertion loss: IL < 0.20 db average (to reference connector) IL < 0.30 db max. (to reference connector) return loss SM: > 70 db for cord diameter of 0.9 mm and 2.8 to 3 mm ST Connector Brief description bayonet lock metal casing with zirconia ferrule IEC 874 compliant colour of boot: black Specifications SM and MM insertion loss SM: IL < 0.20 db average (to reference connector) IL < 0.30 db max. (to reference connector) return loss SM: > 52 db for cord diameter of 0.9 mm and 2.8 to 3 mm

11 Pigtails Patchcords Adaptors 11 SC Connector Brief description automatic lock in adaptor unlocks by pulling on casing plastic casing with zirconia ferrule can be used as duplex connector with duplex clip IEC 874 compliant colour of casing/boot: SM blue, MM beige Specifications SM and MM insertion loss SM: IL < 0.15 db average (to reference connector) IL < 0.25 db max. (to reference connector) return loss SM: > 52 db (SM) for cord diameter of 0.9 mm and 2.8 to 3 mm SC/APC Connector Brief description automatic lock in adaptor unlocks by pulling on casing plastic casing with zirconia ferrule can be used as duplex connector with duplex clip IEC 874 compliant colour of casing/boot: green Specifications SM and MM insertion loss SM: IL < 0.20 db average (to reference connector) IL < 0.30 db max. (to reference connector) return loss SM: > 70 db (SM) UPC polishing for cord diameter of 0.9 mm and 2.8 to 3 mm E2000 Connector Brief description locks with locking lever plastic casing with zirconia ferrule automatic dust protection flap and laser protection tuned for minimum insertion loss colour of casing/boot: blue Specifications SM and MM insertion loss SM: IL < 0.15 db average (to reference connector) IL < 0.25 db max. (to reference connector) return loss SM: > 52 db for cord diameter of 0.9 mm and 2.8 to 3 mm

12 12 Pigtails Patchcords Adaptors E2000 Connector Brief description locks with locking lever plastic housing with zirconia ferrule automatic dust protection flap and laser protection tuned for minimum insertion loss colour of housing/boot: green Specifications SM insertion loss: IL < 0.15 db average (to reference connector) IL < 0.25 db max. (to reference connector) return loss SM: > 70 db / HRL High Return Loss UPC polishing for cord diameter of 0.9 mm and 2.8 to 3 mm LC Connector Brief description locks with locking lever plastic housing with zirconia ferrule can be used as duplex connector with duplex clip IEC 874 compliant colour of housing/boot: SM blue, MM beige Specifications SM and MM insertion loss: IL < 0.15 db average (to reference connector) IL < 0.25 db max. (to reference connector) return loss SM: > 52 db for cord diameter of 0.9 mm and 2.8 to 3 mm

13 Pigtails Patchcords Adaptors 13 Order Code PP XX XX XX XX XX XXXX 00 FU MB BO FC Type Enhanced Performance Fiber Unit Mini Breakout Cable Breakout Cable Fiber Cord Overall length Example m Connector end (no Connector = 00) RL quality SC FC E2000 ST LC Number of fibers 01 1 fiber 02 2 fibers 04 4 fibers 08 8 fibers AA 40 db (PC) C0 F0 E0 S0 L0 50 db (UPC) C1 F1 E1 S1 L1 60 db (APC 8 ) C2 F2 H2 L2 60 db (APC 9 ) C3 F3 H3 L4 0.9 mm; PVC: semi-tight; SM 9/125; yellow Cable type CONNECTOR START (no Connector = 00) RL quality SC FC E2000 ST LC 40 db (PC) C0 F0 E0 S0 L0 50 db (UPC) C1 F1 E1 S1 L1 60 db (APC 8 ) C2 F2 H2 L2 60 db (APC 9 ) C3 F3 H3 L3 Note: Other connector types (MTRJ, MU, etc.) and other cable diameters (1.8 mm simplex, zip cord duplex) or other fiber types (dispersion shifted, low water - peak fibet, OM3 fiber, etc.) are available on request. For breakout cables a connector protector should be ordered for each end. If the breakout cable needs to be pulled, a pull protector (already assembled) should be ordered for the corresponding cable end. See the section on Accessories for other items and tools (from page 122). AB AC BA BB BC CA CB CC DA DB DC OA OB OC 0.9 mm; PVC: semi-tight; OM2, MM 50/125; orange 0.9 mm; PVC: semi-tight; MM 62.5/125; grey 3.0 mm; LSZH: semi-tight; SM 9/125; yellow 3.0 mm; LSZH: semi-tight; OM2, MM 50/125; orange 3.0 mm; LSZH: semi-tight; MM 62.5/125; grey 2.4 mm; LSZH: semi-tight; SM 9/125; yellow 2.4 mm; LSZH: semi-tight; OM2, MM 50/125; orange 2.4 mm; LSZH: semi-tight; MM 62.5/125; grey 2.0 mm; LSZH: semi-tight; SM 9/125; yellow 2.0 mm; LSZH: semi-tight; OM2, MM 50/125; orange 2.0 mm; LSZH: semi-tight; MM 62.5/125; grey 3 x 6 mm; Duplex Figure 0; PVC: semi-tight; SM 9/125; yellow 3 x 6 mm; Duplex Figure 0; PVC: semi-tight; OM2, MM 50/125; orange 3 x 6 mm; Duplex Figure 0; PVC: semi-tight; MM 62.5/125; grey

14 14 Pigtails Patchcords Adaptors FC Adaptor Square Flange Type Brief description SM (zirconia sleeve) or MM (phosphor/bronze sleeve) insertion loss typ. IL SM < 0.10 db IL MM < 0.20 db flange mount IEC 874 compliant SM PPAD SMF001 F1MEF 000 MM PPAD MMF001 F2MEF 000 FC Adaptor D-Hole Type Brief description SM (zirconia sleeve) or MM (phosphor/bronze sleeve) insertion loss typ. IL SM < 0.10 db IL MM < 0.20 db D-hole type IEC 874 compliant SM PPAD SMD001 F1MEF 000 MM PPAD MMD001 F2MEF 000 FC/APC Adaptor Square Flange Type Brief description SM (zirconia sleeve) metal adaptor insertion loss typ. flange mount IEC 874 compliant IL < 0.10 db SM PPAD SMF001 A1MEA

15 Pigtails Patchcords Adaptors 15 ST Adaptor D-Hole Type Brief description SM (zirconia sleeve) or MM (phosphor/bronze sleeve) insertion loss typ. IL SM < 0.20 db IL MM < 0.30 db metal adaptor D-hole type IEC 874 compliant SM PPAD SMD001 S1MES 000 MM PPAD MMD001 S2MES 000 SC Adaptor Square Flange Type Brief description SM (zirconia sleeve) or MM (phosphor/bronze sleeve) insertion loss typ. IL SM < 0.10 db IL MM < 0.20 db screw or latch attachment plastic housing flange mount housing colour: SM blue MM beige IEC 874 compliant SM PPAD SMFS01 C1BLC 000 MM PPAD MMFS01 C2BEC 000 SC/APC Adaptor Square Flange Type Brief description SM (zirconia sleeve) insertion loss typ. IL < 0.10 db screw or latch attachment plastic housing flange mount housing colour: green IEC 874 compliant SM PPAD SMFS01 B1GRB

16 16 Pigtails Patchcords Adaptors SC/PC Duplex Adaptor Square Flange Type Brief description dual SC adaptor for 2 x SC connectors or SC duplex connector insertion loss typ. IL SM < 0.10 db IL MM < 0.20 db screw or latch attachment SM or MM plastic housing flange mount housing colour: SM blue MM beige SM PPAD SMFS02 C1BLC 000 MM PPAD MMFS02 C2BEC 000 E2000 Adaptor Brief description SM plastic housing insertion loss typ. flange mount screw attachment housing colour: blue IL < 0.20 db SM PPAD SMF001 E1BLE 000 E2000APC Adaptor Brief description SM (zirconia sleeve) plastic housing insertion loss typ. flange mount screw attachment housing colour: green IL < 0.20 db SM PPAD SMF001 H1GRH 000

17 Pigtails Patchcords Adaptors 17 E2000APC Adaptor Snap in Type Brief description SM (zirconia sleeve) plastic casing insertion loss typ. latch attachment casing colour: green IL < 0.20 db SM PPAD SMS001 H1GRH 000 LC Duplex Adaptor Square Flange Type Brief description dual LC adaptor for 2 x LC connectors or LC duplex connector insertion loss typ. IL SM < 0.10 db IL MM < 0.20 db screw or latch attachment SM or MM plastic casing flange mount casing colour: SM blue MM beige SM PPAD SMFS02 L1BLL 000 MM PPAD MMFS02 L2BEL 000

18 18 Couplers WDM Attenuators Couplers WDM Attenuators

19 Couplers WDM Attenuators 19 Fiber optic couplers Brief description Fiber optic couplers and wavelength division multiplexers are passive components that are used to separate and combine optical signals in fiber optic networks. Signals can be separated or combined according to custom coupling ratios or wavelengths. These devices are manufactured by using the FBT process (fused bionical taper), or the PLC (planar lightwave circuit) process. Application available in various casing styles can be installed in all LEONI splice closures and jointing boxes Features singlemode and multimode low insertion loss high return loss various casing styles high reliability and stability under thermal and mechanical stress FBT (fused bionical taper) technology PLC (planar lightwave circuit) manufactured and tested in compliance with international standards Fiber optic coupler options Standard multimode coupler available for multimode with wide-ranging ratio options (1/99 % up to 50/50 %), Multimode tree coupler Multimode star coupler for 850 nm or 1300 nm multimode options: 1 (2)x4, 1 (2)x8, 1 (2)x16 and 1 (2)x32 options: 4x4, 8x8, 16x16 and 32x32 Standard singlemode coupler available for singlemode with wide-ranging ratio options (1/99 % up to 50/50 %), 1310 nm ±5 nm or 1550 nm ±5 nm Singlemode wideband coupler available for singlemode with wide-ranging ratio options (1/99 % up to 50/50 %), for wavelengths, e.g. of 1310 nm ±40 nm or 1550 nm ±40 nm Dual window singlemode coupler available for singlemode with wide-ranging ratio options (1/99 % up to 50/50 %), Singlemode tree coupler Wideband tree coupler Dual window tree coupler Singlemode star coupler Wideband star coupler Dual window star coupler PLC coupler for 1310 nm ±40 nm and 1550 nm ±40 nm options: 1 (2)x4, 1 (2)x8, 1 (2)x16 and 1 (2)x32, wavelength 1310 nm ±10 nm or 1550 ±10 nm options: 1 (2)x4, 1 (2)x8, 1 (2)x16 and 1 (2)x32, wavelength 1310 nm ±40 nm or 1550 ±40 nm options: 1 (2)x4, 1 (2)x8, 1 (2)x16 and 1 (2)x32, wavelength 1310 nm ±40 nm or 1550 ±40 nm options: 4x4, 8x8, 16x16 and 32x32, wavelength 1310 nm ±10 nm or 1550 ±10 nm options: 4x4, 8x8, 16x16 and 32x32, wavelength 1310 nm ±40 nm or 1550 ±40 nm options: 4x4, 8x8, 16x16 and 32x32, wavelength 1310 nm ±40 nm or 1550 ±40 nm options: 1x3, 1x4, 1x5, 1x6, 1x7, 1x8, 1x12, 1x24 and 1x32, wavelength nm

20 20 Couplers WDM Attenuators Wavelength Division Mulitplexer (WDM) Features singlemode and multimode low insertion loss high return loss various casing styles high reliability and stability under thermal and mechanical stress manufactured and tested in compliance with international standards Please note: specify connec tor type when ordering. Wavelength division multiplexer product options (others on request) Multimode WDM wavelengths 850/1300 nm, available with 50/125 μm and 62.5/125 μm fiber Standard singlemode WDM available combinations: 1310/1550 nm, 1310/1625 nm, 1310/1650 nm, 1521/1561 nm, 1550/1650 nm, 1501/1541 nm, 1511/1551 nm, 1533/1557 nm High isolation singlemode WDM with high channel isolation DWDM wavelengths in accordance with ITU-Standard, up to 128 channels Optical separators For special applications: These enable isolation or filtering of defined optical channels or wavelength ranges Please ask for detailed specifications.

21 Couplers WDM Attenuators 21 Attenuators Brief description Ongoing development of all the components in a network calls for the use of reliable fiber optical attenuators. These passive optical components reduce the optical power transmitted in a fiber optic cable and thereby enable the optical power level to be adjusted to the dynamic range of the receiving devices in LANs, CATV networks, etc. Features easy installation low insertion loss high return loss 1310 nm and/or 1150 nm compact dimensions Optical attenuator product options Attenuator with fixed attenuation (integrated in coupler) Attenuator with fixed attenuation Attenuator with adjustable attenuation a connector/coupler with integrated attenuation; input and output always have the same type of connector integrated in the patch cord with diameters of 250 µm, 900 µm or 3.0 mm integrated in the patch cord; attenuation is adjustable from 1.5 db to approx. 40 db

22 22 Modular Cable System Modular Cable System Modular Cable System This flexible tube system allows the required number of fibers of the needed type to be blown in at any time. The network can thus be expanded in stages, thus also enabling just-in-time installation at lower cost. Upgrading fibers is easy and exchanged fibers or mini cables can be re-used. Typical applications are access networks (last mile) and in-house cabling systems without requiring any sub-distributors, floor distributors or splices from the central to final point. The fiber can be laid directly to the workstation. Features This makes the Modular Cable System the best solution for business parks, city networks, office complexes, hospitals and industrial areas. Depending on the application, the system is available for Direct Buried (DB) installation and Direct Install (DI) in existing ducts and for in-house (LFH) cabling. n future-proof for your network (flexible expansion) n just-in-time installation n lower cost n fiber upgrade possible at any time n various fiber types in one cable n FTTH customer desk LEONI offers various standard distributor and connector systems to connect the individual modular cables: SM or MM fiber units in 2, 4, 8 or 12 fiber configurations SM or MM mini cables in 24, 48, 60 or 72 fiber configurations loose tube cables with up to 1152 fibers The fibers can be blown in up to a length of 1.5 kilometres. n point-to-point installation n reduces splice and distribution points n modular cable with 3, 5 and 10 mm outer dia. n tubes with outer dia. of 32, 40 and 50 mm

23 Modular Cable System 23 Modular Cable MC DI Direct Install The 1, 2, 4, 7, 12, 19 or 24-way modular cable is produced with 1, 2, 4, 7, 12, 19 or 24 micro tubes (3, 5 or 10 mm in diameter). Application for direct installation in fiber optic duct systems not suitable for direct burial Construction ripcord between micro tubes and aluminium layer aluminium layer (150 µm) inside the MDPE sheath UV resistant jacket colour: black Features the inner surface of the tubes provides particularly good gliding properties 1-way 2-way 4-way 7-way 12-way 19-way 24-way Description Outer Ø Weight Min. bend radius Max. pull force Length on drum mm g/m mm kn m MCDI Modular cable 1-way PE 3 mm DI MCDI Modular cable 2-way PE 3 mm DI 9.4 x MCDI Modular cable 4-way PE 3 mm DI MCDI Modular cable 7-way PE 3 mm DI MCDI Modular cable 12-way PE 3 mm DI MCDI Modular cable 19-way PE 3 mm DI MCDI Modular cable 24-way PE 3 mm DI MCDI Modular cable 1-way PE 5 mm DI MCDI Modular cable 2-way PE 5 mm DI 13.5 x MCDI Modular cable 4-way PE 5 mm DI MCDI Modular cable 7-way PE 5 mm DI MCDI Modular cable 12-way PE 5 mm DI MCDI Modular cable 19-way PE 5 mm DI MCDI Modular cable 24-way PE 5 mm DI MCDI Modular cable 1-way PE 10 mm DI * * * * * MCDI Modular cable 2-way PE 10 mm DI * * * * * MCDI Modular cable 4-way PE 10 mm DI * * * * * MCDI Modular cable 5-way PE 10 mm DI * * * * * MCDI Modular cable 7-way PE 10 mm DI * more detail on request

24 24 Modular Cable System Modular Cable MC DB Direct Buried The 1, 2, 4, 7, 12, 19 or 24-way modular cable is produced with 1, 2, 4, 7, 12, 19 or 24 micro tubes (3, 5 or 10 mm in diameter). Application suitable for direct burial Construction tubes surrounded with aluminium layer (150 µm) ripcord between micro tubes and aluminium layer covered with MDPE and HDPE sheath jacket colour: orange Features the inner surface of the tubes provides particularly good gliding properties 1-way 2-way 4-way 7-way 12-way 19-way 24-way Description Outer Ø Weight Min. bend radius Max. pull force Length on drum mm g/m mm kn m MCDB Modular cable 1-way PE 3 mm DB MCDB Modular cable 2-way PE 3 mm DB 13.2 x MCDB Modular cable 4-way PE 3 mm DB MCDB Modular cable 7-way PE 3 mm DB MCDB Modular cable 12-way PE 3 mm DB MCDB Modular cable 19-way PE 3 mm DB MCDB Modular cable 24-way PE 3 mm DB MCDB Modular cable 1-way PE 5 mm DB MCDB Modular cable 2-way PE 5 mm DB 17.2 x MCDB Modular cable 4-way PE 5 mm DB MCDB Modular cable 7-way PE 5 mm DB MCDB Modular cable 12-way PE 5 mm DB MCDB Modular cable 19-way PE 5 mm DB MCDB Modular cable 24-way PE 5 mm DB MCDB Modular cable 1-way PE 10 mm DB MCDB Modular cable 2-way PE 10 mm DB 27.2 x MCDB Modular cable 4-way PE 10 mm DB MCDB Modular cable 5-way PE 10 mm DB * * * * * MCDB Modular cable 7-way PE 10 mm DB * more detail on request 2000

25 Modular Cable System 25 Modular Cable MC DBR Direct Buried Reinforced The 1, 2, 4, 7, 12, 19 or 24-way modular cable is produced with 1, 2, 4, 7, 12, 19 or 24 micro tubes (3, 5 or 10 mm in diameter). Application suitable for direct burial Construction tubes surrounded with aluminium layer (150 µm) ripcord between micro tubes and aluminium layer covered with MDPE and HDPE sheath tensile layer between the sheaths jacket colour: orange Features the inner surface of the tubes provides particularly good gliding properties Tensile layer: This tensile reinforcement reduces the cable s elongation and protects the fibers when the buried cable is raised during digging work 1-way 2-way 4-way 7-way 12-way 19-way 24-way Description Outer Ø Weight Min. bend radius Max. pull force Length on drum mm g/m mm kn m MCDBRR Modular cable 1-way PE 3 mm DBR * * * * * MCDBR Modular cable 2-way PE 3 mm DBR * * * * * MCDBR Modular cable 4-way PE 3 mm DBR * * * * * MCDBR Modular cable 7-way PE 3 mm DBR * * * * * MCDBR Modular cable 12-way PE 3 mm DBR * * * * * MCDBR Modular cable 19-way PE 3 mm DBR * * * * * MCDBR Modular cable 24-way PE 3 mm DBR * * * * * MCDBR Modular cable 1-way PE 5 mm DBR MCDBR Modular cable 2-way PE 5 mm DBR 19.0 x MCDBR Modular cable 4-way PE 5 mm DBR MCDBR Modular cable 7-way PE 5 mm DBR MCDBR Modular cable 12-way PE 5 mm DBR MCDBR Modular cable 19-way PE 5 mm DBR MCDBR Modular cable 24-way PE 5 mm DBR MCDBR Modular cable 1-way PE 10 mm DBR * * * * * MCDBR Modular cable 2-way PE 10 mm DBR 29.0 x * MCDBR Modular cable 4-way PE 10 mm DBR * MCDBR Modular cable 5-way PE 10 mm DBR * MCDBR Modular cable 7-way PE 10 mm DBR * * more detail on request

26 26 Modular Cable System Modular Cable MC LFH Low Fire Hazard The 1, 2, 4, 7, 12, 19 or 24-way modular cable is produced with 1, 2, 4, 7, 12, 19 or 24 halogen-free micro tubes (3, 5 or 10 mm in diameter). Application suited for indoor laying as it is especially fire resistant Construction tubes surrounded by a halogen-free sheath ripcord between micro tubes and sheath jacket colour: white Features the inner surface of the tubes is low friction jacket material is especially fire resistant 1-way 2-way 4-way 7-way 12-way 19-way 24-way Description Outer Ø Weight Min. bend radius Max. pull force Length on drum mm g/m mm kn m MCLFH Modular cable 1-way PE 3 mm LFH MCLFH Modular cable 2-way PE 3 mm LFH 8.2 x MCLFH Modular cable 4-way PE 3 mm LFH MCLFH Modular cable 7-way PE 3 mm LFH MCLFH Modular cable 12-way PE 3 mm LFH MCLFH Modular cable 19-way PE 3 mm LFH MCLFH Modular cable 24-way PE 3 mm LFH MCLFH Modular cable 1-way PE 5 mm LFH * MCLFH Modular cable 2-way PE 5 mm LFH 12.2 x MCLFH Modular cable 4-way PE 5 mm LFH MCLFH Modular cable 7-way PE 5 mm LFH MCLFH Modular cable 12-way PE 5 mm LFH MCLFH Modular cable 19-way PE 5 mm LFH MCLFH Modular cable 24-way PE 5 mm LFH MCLFH Modular cable 1-way PE 10 mm LFH * * * * * MCLFH Modular cable 2-way PE 10 mm LFH * * * * * MCLFH Modular cable 4-way PE 10 mm LFH * * * * * MCLFH Modular cable 5-way PE 10 mm LFH * * * * * MCLFH Modular cable 7-way PE 10 mm LFH * * * * * * more detail on request

27 Modular Cable System 27 Duct (DU) A duct is used as protection for fiber optic cables, modular cables or single tubes; they are inserted by means of air flow boosted by pushing force. Construction material: high-density polyethylene (HDPE) inside groves to extend the insertion distances the duct s length is marked by the meter custom exterior markings are optional available in various colours Features achieves particularly long insertion distances Single Tube (ST) For blowing in mini and micro cables. Single tubes can be inserted in existing tubes, thereby multiplying the capacity of the ducts. Available with various outer and inner diameters. Construction material: HDPE or PE up to 10 colours special versions on request Duct Single tube Features inner surface of the single tubes provides good gliding properties

28 28 Modular Cable System (1) Duct connector (1) Used to connect one duct to another with the same diameter. MCCO STS MCCO STS MCCO STS Duct connector 32/32 mm 40/40 mm 50/50 mm (2) Reduction duct connector (2) Used to connect one duct to another with different diameter. MCCO STS MCCO STS MCCO STS Reduction duct connector 40/32 mm 50/32 mm 50/40 mm Bored duct connector Used to connect two ducts with a handhole. The duct is passed through the connector into the handhole. MCCO SBS MCCO SBS MCCO SBS Bored duct connector 32/32 mm 40/40 mm 50/50 mm Bored reduction duct connector Used to connect two ducts with a handhole. The duct is passed through the connector into the handhole. Suited for ducts with different diameters in the handhole. MCCO SBS MCCO SBS MCCO SBS Bored reduction duct connector 40/32 mm 50/32 mm 50/40 mm

29 Modular Cable System 29 Duct repair kit 01 Used to connect two ducts with the same diameter after blowing a cable in both directions. Kit 01 MCCO RKSD divisible duct Ø 40, PVC, L = 2 m, for uncut cable MCCO RKSD divisible duct Ø 50, PVC, L = 2 m, for uncut cable MCCO RKSC divisible straight connector mm, PVC, 2 pcs MCCO RKSC divisible straight connector mm, PVC, 2 pcs Duct repair kit 02 Used to connect two ducts with the same diameter before blowing a cable in both directions. Duct repair kit 02 MCCO RKP mm duct, divisible MCCO RKP mm duct, divisible MCCO RKP mm duct, divisible Duct plug Used to seal between the duct and the fiber optic cable. This fitting is divided and thus suited for installation on uncut cable. Features exceptionally space saving as it fits inside the duct no tools required for connecting or disconnecting available for various duct and cable diameters as well as duct closure full duct seal if there is no cable in the duct Duct plug Cable outer Ø HDPE duct 32 mm MCSE IPS HDPE duct ID mm mm HDPE duct 40 mm MCSE IPS HDPE duct ID mm mm MCSE IPS HDPE duct ID mm mm MCSE IPS HDPE duct ID mm mm MCSE IPS HDPE duct ID mm mm HDPE duct 50 mm MCSE IPS HDPE duct ID mm mm MCSE IPS HDPE duct ID mm mm MCSE IPS HDPE duct ID mm mm MCSE IPS HDPE duct ID mm mm

30 30 Modular Cable System Straight tube connector Used to connect tubes with the same diameter. MCCO STC MCCO STC MCCO STC Straight tube connector 3 3 mm 5 5 mm mm Reduction duct connector Used to connect tubes that have different diameter. MCCO STC MCCO STC Reduction duct connector 3 5 mm 5 10 mm Gas block tube connector Connectors with rubber seal rings to connect the fiber units to the tubes providing a (lateral) gas tight seal. MCCO GBS MCCO GBS MCCO GBS Gas block tube connector 3 5 mm 5 5 mm mm End tube connectors Used to seal an open tube. They thereby prevent penetration of dirt or water. MCCO ECC MCCO ECC MCCO ECC End tube connectors 3 mm 5 mm 10 mm Clip Used to improve securing of the tubes in the connectors. It is used primarily in direct burial. MCC0 C0C MCC0 C0C MCC0 C0C Clip 3 mm 5 mm 10 mm

31 Modular Cable System 31 Closedown connector Used for blowing in the fiber units in two directions. MCCO CDS MCCO CDS Closedown connector 5 5 mm mm Sealing element Used for sealing unassigned and assigned (cut) ducts up to 0.5 bar. Can also be used or re-used for initially unassigned ducts. MCCO CDS MCCO STS Sealing elements 40 mm duct / 5 x 10 mm tube 50 mm duct / 7 x 10 mm tube Y connector Used (also subsequently) to branch off a cable in an assigned duct at a 45 angle. The Y connector is sand tight. MCCO YCS MCCO YCS MCCO YCS MCCO YCS Y connector 40/40/25 mm duct 40/40/40 mm duct 50/50/25 mm duct 50/50/50 mm duct Modular cable entry kit 01 Used for lateral sealing of cut modular cable (gas and water tight). The kit provides a gas and water-tight seal between the micro tubes. Modular cable entry kit 01 MCSE HSV for Ø mm MCSE HSV for Ø mm MCSE HSV for Ø 8 30 mm Modular cable entry kit 02 Used for lateral sealing of uncut modular cable (gas and water tight). The kit provides a gas and water-tight seal between the micro tubes. Bestell-Nr. Modular cable entry kit 02 MCSE HSV for Ø mm

32 32 Handhole L Handhole L The Handhole L range comprises underground boxes for use in the backbone and access area. Handholes are used to store overlengths of cables, seal the fiber optic cable ducts and house the fiber optic splice boxes. The modular frames of the handhole permit adaptation to any installation height. Each of the module frames has a variety of punch-outs, which can be used as duct entries. The Handhole L covers are standardised and available in various load classes (EN124). This permits installation in pedestrian areas (B125 kn) as well as in vehicle traffic areas (D400 kn) using the same modular handhole. Features n various load classes n modular construction The basic kit includes a standard cast iron cover. A concrete-filled steel cover and a pavable steel cover are also available. The Handhole L cover can be adjusted to the street level using an optional height compensation kit. The modular construction provides the option of uncut branches off cables that are in use. n height-adjustable n drainage system n easy to move by hand n configurable number and position of duct entries n duct entries Ø 110, 50, 40 mm n polycarbonate handhole

33 Handhole L 33 Handhole L Brief description This range serves as underground boxes for use in the backbone and access area. Example Specifications single or multi-section cover for load class B 125 or D 400 galvanized steel frame with elastomer cover coating polycarbonate modular frames frame elements available in different heights polycarbonate base plate Handhole L modular HHLM ABB 00 inside dims: 1165 x 800 x 752 mm (l x w x h) long side entries 5 x Ø 110 mm, 12 x Ø 50 mm concrete-filled steel cover, load class B 125 kn HHLM ABD 00 inside dims: 1165 x 800 x 752 mm (l x w x h) long side entries 5 x Ø 110 mm, 18 x Ø 50 mm concrete-filled steel cover, load class D 400 kn HHLM ABB 00 inside dims: 1165 x 550 x 752 mm (l x w x h) long side entries 5 x Ø 110 mm, 12 x Ø 50 mm concrete-filled steel cover, load class B 125 kn HHLM ABD 00 inside dims: 1165 x 550 x 752 mm (l x w x h) long side entries 5 x Ø 110 mm, 12 x Ø 50 mm concrete-filled steel cover, load class D 400 kn

34 34 Handhole L Additional frame elements for Handhole L without entries Frame element HHLM inside dims 1165 x 800 x 70 mm (l x w x h) without duct entries HHLM inside dims 1165 x 550 x 70 mm (l x w x h) without duct entries Frame element with entries Frame element HHLM B00 00 inside dims 1165 x 800 x 220 mm (l x w x h) on the long and short sides each 5 x Ø 110 mm HHLM B00 00 inside dims 1165 x 550 x 220 mm (l x w x h) on the long and short sides each 3 x Ø 110 mm HHLM A00 00 inside dims 1165 x 800 x 220 mm (l x w x h) on the long side 5 x Ø 110 mm on the short side 18 x Ø 50 mm HHLM A00 00 inside dims 1165 x 550 x 220 mm (l x w x h) on the long side 5 x Ø 110 mm on the short side 12 x Ø 50 mm Height compensation kit for Handhole L HHLA HC Height compensation kit 4 threaded spindles, 1 socket wrench Cover lifter for Handhole L HHLA CL Cover lifter 2 pcs included as standard

35 Handhole L 35 Plug Ø 110 mm Plug Ø 30 mm for Handhole L HHLA G for drill holes in the cover, oval, 18 pcs per cover, for Handhole L HHLA P Plugs Frame connector for drill holes in the cover, round, 12 pcs per cover, for Handhole L HHLA PO for Handhole L HHLA FC Duct adaptor Ø 110 mm Plug Ø 51.5 mm for 2 x Ø 50 mm, for Handhole L HHLA DA for duct adaptor Ø 110 mm for Handhole L HHLA P Reducer Ø 50 mm Hole on duct Ø 40 mm, divisible, for Handhole L More accessories and tools in the Accessories section. HHLA R

36 36 Street Cabinet Street Cabinet The Street Cabinet range is for use as a tube and/or fiber optic cable distribution point in the access area. Strain relief for the tubes, modular cables and standard fiber optic cables is located in the base. The tube management compartment is used to connect, divide and store the modular cable tubes. The same compartment can be used as a point of access to facilitate blowing in (also midpoint blowing) of the fiber units, mini or standard cables. Excess lengths of mini and standard cables are stored in the Street Cabinet and guided directly into the splice management part (closure, termination box). Features In the splice management part, which is connected to the tube management by a flexible hose, fiber units from the modular cables can be spliced with the fibers from mini or standard cables. This therefore enables easy connection of different cable types (network levels). n standalone Street Cabinet system n weatherproof n impact resistant n different sizes available n highly flexible n suitable for outdoor use n storage of cable overlength

37 Street Cabinet 37

38 38 Street Cabinet SC1 Street Cabinet 01 Due to its compact dimensions, weatherproof and impact-resistant casing, Street Cabinet 01 is excellent for outdoor installation. Brief description prepared for installation of a half-cylinder lock can be equipped with a pivoting termination box (TB07, TB06) in which the splice trays are located a strain relief system for tubes and modular cables is located in the base the construction of SC1 guarantees adherence to prescribed bending radii provision for storage of overlenghts of mini and standard cable Specifications dimensions: 1410 x 305 x 230 mm (with base h x w x d) glass fiber reinforced polyester enclosure temperature range: 40 C to +100 C tube management (Ø 3, 5 / 10 mm) mini cable overlength storage easy fitting with hinged TB07 or TB06 bracket (more information from page 92) capacity with Termination Box 07 max. 288 splices Termination Box 06 max. 144 splices Street Cabinet 01 SC1N N dimensions: 950 x 780 x 310 mm (with base h x w x d) 1 mounting rail Application example

39 Street Cabinet 39 SC1 Street Cabinet 05 Due to its compact dimensions, weatherproof and impact-resistant casing, Street Cabinet 05 is excellent for outdoor installation. Brief description prepared for installation of a half-cylinder lock can be equipped with a closure (CL01 CL07) or a termination box (TB07, TB06) in which the splice trays are located (more information from page 92) tube strain relief system located in the base the construction of SC5 guarantees adherence to prescribed bending radii provision for storage of overlenghts of mini and standard cable base must be ordered separately Specifications dimensions (without base h x w x d): 850 x 785 x 320 mm or 1080 x 785 x 320 mm glass fiber reinforced polyester casing temperature range: 40 C to +100 C tube management (Ø 3, 5 / 10 mm) storage of cable overlength tube strain relief in base capacity with closure CL03 max. 576 splices closure CL06 max splices (more information from page 72) Street Cabinet 05 SC5N SC5N dimensions: 950 x 780 x 310 mm (without base h x w x d) with cable overlength storage dimensions: 1080 x 785 x 320 mm (without base h x w x d) with cable overlength storage Application example

40 40 Street Cabinet Plastic Base 05 Used to hold Street Cabinet 05 and secure fiber optic cable tubes coming out of the ground. The front panel can be removed enabling easy securing of the fiber optic cable tubes. Brief description the material always matches that of the Street Cabinet Base 05 is delivered flat-packed Specifications dimensions (h x w x d): 950 x 780 x 310 mm or 1200 x 780 x 310 mm glass fiber reinforced polyester casing temperature range: 40 C to +100 C strain relief Base 05 SC5S N dimensions: 950 x 780 x 310 mm (h x w x d) 1 strain relief rail SC5S H dimensions: 1200 x 780 x 310 mm (h x w x d) 1 strain relief rail Cable clamps to match the strain relief rail on page 124.

41 Street Cabinet 41 Tube Management Kit Used to connect and route the tubes of the modular cable. The kit can also be used as point of blowing (also midpoint blowing) of the fiber units, mini cables or tubes. Tube Management Kit SC1A NT00 00 for Street Cabinet 01 complete back panel SC5A NT00 00 for Street Cabinet 05 complete back panel SC5A NH00 00 for Street Cabinet 05 half back panel Cable clamps to match the strain relief rail on page 124. Base 05 Mounting Plate To improve positioning when setting the base up on the ground. Application a plate is required for Street Cabinet 01 two plates are required for Street Cabinet 05 Base 05 SC0A P x 400 x 60 mm, including nuts and bolts

42 42 Fiber Optic Cable Fiber Optic Cable Fibre units, micro cable and mini cable are basic components of the Modular Cable System. LEONI cables are specially designed to work in conjunction with the micro-tube assemblies for optimum blowing performance. Fiber break-out is facilitated by using specific tooling products. LEONI provides high performance cable products in singlemode and multimode versions. The cables or single tubes are inserted into the ducts with drive wheels and air pressure. Features n enhanced performance fiber unit n micro cable n loose tube mini cable LEONI standard cable types for single or multi-duct assemblies* Fiber unit FU Fiber unit 2, 4, 8, 12 fibers Micro cable MUC Micro cable 2 to 24 fibers Mini cable LTMC Loose tube mini cable 24 to 96 fibers Cable LTC Loose tube cable 4 to 576 fibers * other types or fibers on request n loose tube cable

43 Fiber Optic Cable 43 FU Fiber Unit The external construction of the jacket makes it possible to achieve good blowing-in properties. Jacket Fiber Construction fiber singlemode or jacket colour multimode fibers yellow Specifications Fiber Unit (FU) with 2, 4, 8 and 12 fibers singlemode 9/125 µm, multimode 50/125 and 62.5/12 special coating (low frictional resistance) Description Outer Ø Weight Min. bend radius mm g/m mm m Singlemode 9/125 * fiber unit 2xSM9/ * * fiber unit 4xSM9/ * * fiber unit 8xSM9/ * * fiber unit 12xSM9/ * Multimode 50/125 * fiber unit 2xMM50/ * * fiber unit 4xMM50/ * * fiber unit 8xMM50/ * * fiber unit 12xMM50/ * Multimode 62.5/125 * fiber unit 2xMM62.5/ * * fiber unit 4xMM62.5/ * * fiber unit 8xMM62.5/ * * fiber unit 12xMM62.5/ * * more detail on request Length on drum

44 44 Fiber Optic Cable Micro cable (MUC) The micro cable can be blown into single or multi-duct assemblies from an inner diameter of 3.5 mm. Construction cable core singlemode or multimode strain relief elements jacket material jacket colour fibers gel-filled tubes non-metalic (aramide) polyethylene (HDPE) black inkjet inscription in white LEONI to the home Thermal properties transport and storage 25 C to + 70 C installation 5 C to + 50 C operation 25 C to + 70 C Chemical properties good resistance to oil, petrol, acids and alkaline solutions Behaviour in fire cable is halogen free Specifications No. of fibers Cable Ø Min. duct Ø mm 3.5 mm mm 3.5 mm mm 5.5 mm Description Outer Ø Weight Min. bend radius mm kg/km mm m Singlemode 9/125 * micro cable 2xSM9/ * * micro cable 4xSM9/ * Multimode 50/125 * * * * * * * * * * * * Multimode 62.5/125 * * * * * * * * * * * * * more detail on request Length on drum

45 Fiber Optic Cable 45 LTMC loose tube mini cable Suitable for blowing into tubes from an inside diameter of 8.0 mm. Construction cable core core bundle, gel-filled jacket material jacket colour Ø 1.6 mm with 2 12 optical fibers polyethylene (HDPE) black inkjet inscription in white LEONI to the home Thermal properties transport and storage 25 C to + 70 C installation 5 C to + 50 C operation 25 C to + 70 C Chemical properties good resistance to oil, petrol, acids and alkaline solutions Behaviour in fire cable is halogen free Specifications No. of fibers Cable Ø Min. duct Ø mm 8 mm mm 10 mm Description Outer Ø Weight Min. bend radius mm kg/km mm m Singlemode 9/125 * loose tube mini cable 24xSM9/ * * loose tube mini cable 36xSM9/ * * loose tube mini cable 48xSM9/ * * loose tube mini cable 60xSM9/ * * loose tube mini cable 72xSM9/ * Multimode 50/125 upon request Multimode 62,5/125 upon request * more detail on request Length on drum

46 46 Fiber Optic Cable Loose tube cable (LTC) Suited for blowing into duct systems or direct burial. Special types produced on request. Outer jacket Water-absorbent fleece Loose tube, gel filled Ripcord Strain relief and rodent protection Central strength member Construction cable core core bundle, gel-filled Thermal properties jacket jacket colour PE jacket with inscription black transport and storage 25 C to + 70 C installation 5 C to + 50 C operation 25 C to + 70 C Chemical properties good resistance to oil, petrol, acids and alkaline solutions Behaviour in fire cable is halogen free no corrosive or toxic conflagration gases Description Construction Outer Ø Weight Min. bend radius mm kg/km mm m Singlemode 9/125 * loose tube cable 12xSM9/125 3 x 4 fibers * * loose tube cable 24xSM9/125 6 x 4 fibers * * loose tube cable 48xSM9/125 4 x 12 fibers * * loose tube cable 60xSM9/125 5 x 12 fibers * * loose tube cable 72xSM9/125 6 x 12 fibers * * loose tube cable 96xSM9/125 8 x 12 fibers * * loose tube cable 120xSM9/ x 12 fibers * * * * * loose tube cable 144xSM9/ x 12 fibers * * loose tube cable 192xSM9/ x 12 fibers * * * * * loose tube cable 288xSM9/ x 24 fibers * * loose tube cable 384xSM9/ x 24 fibers * * * * * loose tube cable 432xSM9/ x 24 fibers * * * * * loose tube cable 576xSM9/ x 24 fibers * * more detail on request Length on drum

47 Fiber Optic Cable 47 All cables shown are just an extract from our extensive range of products. Other cables are available on request.

48 48 Rack System A Shelves Rack System A Shelves The range of Rack System A Shelves serves as a cable end closure and distribution box in the access area. It is a front-patch system for switching of FO cables with very thick casing. All Rack System A Shelves are delivered with splice tray cover, matching cable entries und various accessories. The structure of Rack System A Shelves guarantees their compliance with the stipulated bend radii. When ordering please note the different connector types, such as for example FC/PC, ST, SC or E2000. Features Supply from the factory of adaptors and pigtails reduces installation time substantially. The use of management shelves in the division of loose tubes is recommended for processing of high fiber optic cables. Cable shelves are used to store excess patch cord lenghts. n cable end closure n distribution box n high packing density n different height units n detachable n re-transferable n angled cable entries n cable strain relief n easy installation

49 Rack System A Shelves 49 Rack System 1HU Splice/Patch Shelf A Brief description splice/patch shelf for up to 24 fibers rack installation two-sided cable entry optional Specifications powder coated sheet steel RAL 7035 outer dims 19 " 44 x 480 x 278 mm (h x w x d) mm partly detachable 0 60 mm scope for repositioning also available in a short version outer dims 44 x 480 x 240 mm (h x w x d) tension, push and torsion relief capacity: max. 48 splices max. 2 cable entries PG16 (Ø 7 14 mm) max. number of pigtails/adaptors: 24 pcs FC/PC, FC/APC, ST, SC, SC/APC, E2000, E2000HRL A B C D HE (19 ) 2 SU (ETSI) A B C D

50 50 Rack System A Shelves Rack System 2HU Splice/Patch Shelf A Brief description splice/patch shelf for up to 48 fibers rack installation option of cable entries on two sides Specifications powder coated sheet steel RAL 7035 outer dims 19 " 88 x 480 x 278 mm (h x w x d) mm partly detachable 0 60 mm scope for repositioning tension, push and torsion relief capacity: max. 96 splices max. 4 cable entries PG16 (Ø 7 14 mm) max. number of pigtails/adaptors: 48 pcs FC/PC, FC/APC, ST, SC, SC/APC, E2000, E2000HRL A B C D HE (19 ) 4 SU (ETSI) A B C D

51 Rack System A Shelves 51 Rack System 3HU Splice/Patch Shelf A Brief description splice/patch shelf for up to 72 fibers rack installation option of cable entries on three sides Specifications powder coated sheet steel RAL 7035 outer dims 19 " 44 x 480 x 278 mm (h x w x d) mm partly detachable 0 60 mm scope for repositioning tension, push and torsion relief capacity: max. 144 splices max. 6 cable entries PG16 (Ø 7 14 mm) max. number of pigtails/adaptors: 72 pcs FC/PC, FC/APC, ST, SC, SC/APC, E2000, E2000HRL A B C D HE (19 ) 6 SU (ETSI) A B C D

52 52 Rack System A Shelves Rack System 3HU Management Shelf A The Management Shelf enables the division of several fiber optic cables into their loose tubes. Every single loose tube is fed into the Splice/Patch Shelves through flexible tubes. Loose tubes not required are stored in the Management Shelf. The installed Management Shelf is accessible at any time via the folding front panel and the removable cover. Brief description management shelf for unused loose tubes and excess lengths of them rack installation various options for cables and tube glands Specifications powder coated sheet steel RAL 7035 outer dims 19 " x 480 x 278 mm (h x w x d) capacity: max. 3 cable entries PG21 (Ø 9 16 mm) max. 8 entries for 20 mm Ø tubes with tube gland PG11 Rack System 3HU RS0A 3 P 5 0 0M Rack System A, Management Shelf 19", 3 height units, with 4 tube glands PG 11 for Ø 20 mm tube, 2 tube glands PG 21 metal Ø 9 16 mm, 2 m tube Ø 20 mm 301 A B D C 3 HE (19 ) 6 SU (ETSI) A B C D

53 Rack System A Shelves 53 Rack System 1HU Cable Shelf A Rack System 2HU Cable Shelf A Rack System 1HU The Cable Shelf stores the excess lengths of patch cord. Patch cords can be drawn out or drawn in from the front as well as the back through openings with edge support. Brief description cable shelf 19", 1 or 2 height units rack installation Specifications powder coated steel sheet RAL 7035 outer dims (see diagram) mm partly detachable 0 60 mm scope for repositioning Rack System 2HU RS0A 1 P 5 0 0C RS0A 2 P 5 0 0C Rack System A 1 HU Cable shelf 19", 1 height unit 2 HU Cable shelf 19", 2 height units A B A B D C D C Rack System 1HU 278 Rack System 2HU 1 HE (19 ) 2 SU (ETSI) A B C D HE (19 ) 4 SU (ETSI) A B C D

54 54 Rack System A Shelves Instrument base plate Used to cover unused high units in the 19 frame. The instrument base plate with four side angles is designed for higher weights. RSAC IB RSAC IB Instrument base plate 2 height units, ventilated, 2 side angles 2 height units, ventilated, 4 side angles Blind front panels Used to store units in the 19 frame. Blind front panels RSAC BP XX XX = 01, 02, 03, 04, 06 for 1, 2, 3, 4 or 6 height units Cable guidance panel RSAC CP Cable guidance panel incl. 4 rings, 1 height unit Feed-through front panel RSAC TP Feed-through front panel 1 height unit Cable entry angle Please quote the Pg entry angle when ordering. Options of PG16 or PG21. Cable entry angle RS0A AC PG PG16 Ø 7 14 mm 1 height unit RS0A AC PG PG21 Ø 9 16 mm 1 height unit RS0A AC PG PG16 Ø 7 14 mm 2 height units RS0A AC PG PG21 Ø 9 16 mm 2 height units

55 Order Code Splice/Patch Shelf Rack System A Shelves 55 RS0AX P 5 0 XX X X Height 1 1 height unit (1HE) 2 2 height units (2 HE) 3 3 height units (3HE) Number of adaptors and pigtails 0 none A C 12 adaptors / 12 pigtails 24 adaptors / 24 pigtails Patch panel holes 00 none Hole type 0 none holes holes F C E S FC SC E2000 ST Note: The number and type of the splice trays (heatshrink or ANT splice protector), connectors and pigtail cords have to be ordered separately. Standard entries: 1 x PG 16 Ø 7 14 mm per height unit. Special types can be produced on request (MTRJ, MU, LC, MPO,...). See the Accessories section for other items and tools (from page 122).

56 56 Rack System 1 Rack System 1 This innovative, flexible and modular 19" fiber optic management system provides many intelligent detail solutions. The technical conditions in a fiber optic network ensure maximum uptime. The network can be expanded without affecting the fibers in use. The system consists of the following basic components: rack splice/patch shelves management shelves and/or single fiber management. Features n high network uptime n modular construction n innovative 19" fiber optic management system Every single Rack System 1 section is incrementally detachable and, when fully detached, can be fixed and hung. Single loose tubes (Cable Management, Management Shelf) are distributed through flex tubes in the system. Removable patch cord guides, bend radius control and strain relief are included in the system. LEONI offers both single and addable racks. n controlled patch cord management n highly user-friendly n perfect connector protection n high packing density n tool-free handling

57 Rack System 1 57 management shelf 1 splice/patch shelf 1 patch cord clamp radius control splice tray SK2002 pulled-out splice/patch shelf swivel frame connector protection patch cord management rear view

58 58 Rack System 1 Rack System 1 Single rack To accept the individual patch, splice and management components. The single rack consists of a casing (incl. sheet metal doors), a swivel frame and the patch cord management channel. The swivel frame can be fitted left or right, providing optimum use of space. Specifications available in different sizes sheet metal rack, RAL 7035, pre-fitted sheet metal doors front and back metal roof panel 100 mm base with ventilation slits fitting kit for swivel frame patch cord management channel for excess lengths of cable swivel frame, 130 range channel casing with see-through door or metal door excess length guides space to install variable system components channel system cover

59 Rack System 1 59 Rack System 1 Addable rack An addable rack contains an additional cable channel to make cross-rack patching possible, while the special cable duct makes swivelling non-hazardous. This rack also provides all the features of the Rack-System 1 Single Rack. Specifications available in different sizes sheet metal rack, RAL 7035, pre-fitted sheet metal doors front and back metal roof panel 100 mm base with ventilation slits fitting kit for swivel frame patch cord management channel for excess lengths of cable Channel for cross-rack patching cable duct on the hinge channel casing with see-through door or metal door swivel frame, 130 range excess length guides space to install variable system components

60 60 Rack System 1 Rack System 1 Splice/Patch Shelf 1 Brief description for up to 24 fibers flexible cable and tube entry on two sides uncut cable entry points (standard) cable and tube ties provide strain relief option of additional aramide and strength member strain relief Specifications powder coated steel sheet, RAL 7032 outer dims 19" 1HU 44 x 485 x 380 mm (h x w x d) capacity: max. 48 splices max. 4 angled cable inlets max. number of pigtails and adaptors: 24 pcs FC/PC, FC/APC, ST, SC, SC/APC, E2000, E2000HRL cable entry angle with 45 openings angled strain relief cover locking points splice tray Kevlar and strength member strain relief splice tray cover cable clip front cover connector guard base casing adaptor front panel 2-part cord strain relief cord radius control Dims: 485 x 380 x 43.5 side angle

61 Rack System 1 61 Rack System 1 Module mounting shelf Brief description option to fit up to three modules the modules can be drawn out individually to the front or back and locked into place the patch cord guard can be removed with quick-lock/ release mechanism lateral patch cord strain relief and radius control option of additional aramide and strength member strain relief Specifications Module mounting shelf powder coated steel sheet, RAL 7035 outer dims 19 " 1HU 44 x 480 x 375 mm (h x w x d) capacity: max. 3 modules Module powder coated steel sheet, RAL 7035 outer dims 31 x 134 x 250 mm (h x w x d) capacity: max. 24 splices max. 1 cable entry PG11 (Ø 6 9 mm) max. number of pigtails and adaptors: 12 pcs FC/PC, FC/APC, ST, SC, SC/APC, E2000, E2000HRL

62 62 Rack System 1 Rack System 1 Management Shelf 1 Brief description enables division of several fiber optic cables into their loose tubes the individual loose tubes are fed into the Splice/ Patch Shelves through flexible tubes unused loose tubes are stored here, thereby making it possible to extend a system that is in operation option of additional aramide and strength member strain relief Specifications powder coated steel sheet, RAL 7032 outer dims 19 " 2HU 88 x 485 x 380 mm (h x w x d) capacity: max. 4 angled cable entries max. 10 tube entries (flexible Ø 11 mm tube) Rack System 1 RS01 2 P N 0 0M Management box 19", 2 height units 4 tube glands PG 7 for Ø 10 mm tube, 1 feed-through spout, 8 m tube with Ø 10 mm cable entry angle with 45 openings angled strain relief cover locking points Kevlar and strength member strain relief front panel base casing Dims: 485 x 380 x 88 side angle

63 Rack System 1 63 Side panel, 2 pieces Specifications outer dims height 2000 or 2200 mm depth 600 or 800 mm secured on both sides with screws RSAC SP XX00YY XX height 20 = 2000 mm / 22 = 2200 mm YY depth 06 = 600 mm / 08 = 800 mm Roof panel with patch cord management Specifications outer dims width 600 or 800 mm depth 600 or 800 mm with patch cord entries and bend controllers RSAC T0 00XXYY XX width 06 = 600 mm / 08 = 800 mm YY depth 06 = 600 mm / 08 = 800 mm Roof panel with cable entry Specifications powder coated steel sheet, RAL 7032 outer dims width depth with cable entry 600 or 800 mm 600 or 800 mm RSAC T0 00XXYY XX width 06 = 600 mm / 08 = 800 mm YY depth 06 = 600 mm / 08 = 800 mm Cable management mounting kit Specifications powder coated steel sheet, RAL 7032 width 600 mm or 800 mm for fitting distribution boxes to the rack (see the Distribution Boxes section from page 84 for the various types of box) RSAC CM 00XX XX width 06 = 600 mm / 08 = 800 mm

64 64 Rack System 1 Shelves Rack System 1 Patch cord channel with bend controllers RS01 AC PC XX XX height unit 36 = 36 HU, 40 = 40 HU, 45 = 45 HU Rack System 1 Patch cord clamp 19" RS01 AC CC height unit Rack System 1 Entry angel Entry angel RS01 AC PG L 00 2 holes left RS01 AC PG R 00 2 holes right RS01 AC PG L 00 3 holes left RS01 AC PG R 00 3 holes right RS01 AC PG PG 7 tube gland Rack System 1 Radius control RS01 AC RC Radius control 2 19" Rack System 1 Blind module for module mounting shelf RSM0 1 P S

65 Rack System 1 65 Order Code Rack System 1 RS01 XX 08 XX X X AAAA 00 Rack height mm mm Patch cord roof channel 0 not fitted 1 fitted Rack depth mm Patch cord channel 0 not fitted mm Rack height 2000 mm 2200 mm Single rack 40 height units 45 height units Addable rack 34 height units 38 height units L R left side right side Splice/Patch Shelf RS01 X P N 0 XX X X Height 1 1 height unit Number of adaptors and pigtails 0 none 00 none Holes, adaptor plate A C 12 adaptors / 12 pigtails 24 adaptors / 24 pigtails holes holes Hole type 0 none Note: The number and type of the splice trays (heatshrink or ANT splice protector), connectors and pigtail cords have to be ordered separately. F C E S FC SC E2000 ST Special types can be produced on request (MTRJ, MU, LC, MPO,...). You will find further accessories and tools in the Accessories section.

66 66 Rack System 3 Rack System 3 This innovative, flexible and modular 19" fiber optic management system provides many intelligent detail solutions. The technical conditions in an FO network ensure maximum uptime. The network can be expanded without affecting the fibers in use. Features The system consists of the following basic components: distribution boxes for cable management rack to accept the splice/patch shelves splice/patch shelves rack for patch cord management n 19" fiber optic management system for 2160 fiber terminations (per rack) n cable management for standard and mini cables as well as the modular cable system: Ø 3, 5 and 10 mm n splice and patch management 48 fibers /1 HU 72 fibers/1.5 HU 96 fibers/2 HU connector types: FC/PC, SC, E2000 etc. n patch cord length management n highly user-friendly The splice/patch shelves can be swivelled outward and have, depending on the version, an integrated hinged module that locks when swivelled out and is thereby held open. Rack System 3 may be used for a variety of cable solutions: modular cables Here the micro tubes are fed either directly into splice/patch shelves or after reduction to a smaller diameter. standard fiber optic cables or mini cables Here the single loose tubes are fed into the protective conduits and distributed. Bend radius controllers for guiding the patch cords are integrated in both the splice/patch shelf and the patch cord management module. The pivot point of the splice/patch shelves and the positioning of the patch cord management can be left or right. n perfect connector protection n tool-free handling

67 Rack System 3 67 Base rack Rack System 3 The rack serves to accept the splice/patch shelves in the front area and the distribution boxes in the back. The rack consists of the following components: Frame, sheet-metal doors front/rear, roof, base and 19" fixed frame to which the splice/ patch shelves can be fitted. This base rack enables construction, with the corresponding modules, of a rack for cable management and splice/patch shelves or patch cord management. Specifications dimensions (h x w x d) 2200 x 600 x 600 mm (45 HU) sheet metal rack, RAL 7035, pre-fitted sheet metal door front/rear metal roof panel 100 mm base with ventilation slits fitting kit for 19" fixed frame RS AAAA 00

68 68 Rack System 3 Splice/Patch Shelf 3 with swivel module The swivel module makes it possible to achieve high packaging density, i.e. the splice/patch shelf has two separate, easily accessible levels (swivel out and fold up) containing the adaptors, pigtails and splice trays. Brief description for up to 48 fibers With swivel module suitable for standard FO cables, mini cables and modular cables with various diameters (e.g. 3 and 5 mm) Specifications powder coated steel sheet, RAL 7035 outer dims 19 " 1 height unit 44 x 496 x 305 mm (h x w x d) capacity: max. 48 splices max. 4 cable entries, depending on entry, suitable for 1 tube gland or 6 MKS* tubes of 3 mm or 3 MKS* tubes of 5 mm max. number of pigtails and adaptors: FC/PC, FC/APC, ST 48 pcs SC, SC/APC, E2000, E2000HRL 48 pcs * Modular Cable System Splice/Patch Shelf 3 without swivel module Brief description for up to 48 fibers without swivel module suitable for standard FO cables, mini cables and modular cables with various diameters (e.g. 3 and 5 mm) Specifications powder coated steel sheet, RAL 7035 outer dims 19 " 1 height unit 44 x 496 x 305 mm (h x w x d) capacity: max. 48 splices max. 4 cable entries, depending on entry, suitable for 1 tube gland or 6 MKS* tubes of 3 mm or 3 MKS* tubes of 5 mm max. number of pigtails und adaptors: FC/PC, FC/APC, ST 24 pcs SC, SC/APC, E2000, E2000HRL 48 pcs * Modular Cable System

69 Rack System 3 69 Side panel, 2 pieces Specifications Height 2000 or 2200 mm depth 600 mm secured on both sides with screws RSAC SP XX00YY XX height 20 = 2000 mm / 22 = 2200 mm YY depth 06 = 600 mm Roof panel wih patch cord management Specifications outer dims 600 x 600 mm with patch cord entries and bend controllers RSAC T Roof panel with cable entry Specifications outer dims 600 x 600 mm with cable entry RSAC T Cable management mounting kit Specifications width 600 mm for fitting distribution boxes to the rack (see the Distribution Boxes section from page 84 for the various types of box) RSAC CM 00XX XX width 06 = 600 mm Patch cord management set Specifications patch cord management module, 19" RSAC PC with bend radius control to ensure perfect feed of the patch cord in the rack (8 pcs in the front and 5 in the rear)

70 70 Rack System 3 Blind front panels Used to cover unused high units in the 19" frame. Blind front panels RSAC BP XX XX = , 03, 04, 06 for 1, 2, 3, 4 or 6 height units Cable guidance panel RSAC CP Cable guidance panel incl. 4 rings, 1 height unit Feed-through front panel RSAC TP Feed-through front panel 1 height unit

71 Rack System 3 71 Order Code Splice/Patch Shelf RS031 X N 0 XX X X A B C D Type with swivel module, left turn with swivel module, right turn without swivel module, left turn without swivel module, right turn Number of adaptors fitted 0 none C E 24 adaptors 48 adaptors Holes, adaptor plate Hole type 0 none 00 none holes holes F C E S FC SC E2000 ST Note: The number and type of the splice trays (heatshrink or ANT splice protector), connectors and pigtail cords have to be ordered separately. Special types can be produced on request (MTRJ, MU, LC, MPO,...). You will find further accessories and tools in the Accessories section.

72 72 Closures Closures The Closures range is used to easily connect and branch off fiber optic cables in the backbone and access area. The modular construction inside the closure contains a cable strain relief system and enables splice, tube and also tube/splice management. Features n pressure sealed and weather-resistant casing n high packing density What sets the Closures range apart: all closures can be fitted with splice trays for heatshrink or ANT splice protectors a variety of entry kits is available as accessories for cable, mini cable and tubes splice trays covers and accessories are included as standard the construction guarantees adherence to stipulated bending radii for direct burial, handhole, mast or wall mount can be used together with other accessories external strain relief available for mast fitting the oval entry port permits use of uncut cables This product range is particularly suited to outdoor use also under extreme ambient conditions due to its compact dimensions and material properties. n easy installation n for direct burial, handhole, mast or wall mount n entry port for uncut cable

73 Closures 73 CLS 01 Splice Management 01 Designed especially for connecting glass fiber cables. The oval entry port means that the closure is suited for uncut cable and that it can be used as a joint and branch-off closure. Specifications dimensions Ø 145 mm, height 473 mm plastic casing polypropylene, UV resistant pressure tight up to 0.4 bar temperature range 40 C to +100 C capacity max. 6 splice trays (144 splices) max. entries: 1 x oval for uncut cable 2 x Ø mm, 4 x round for cable with Ø mm, as well as mini cables and micro tubes CLS CLS 01 The number and type of splice trays (heatshrink or ANT splice), entry kits and mounting kits must be ordered separately CLS 03 Splice Management 03 Designed especially for connecting high fiber cables. The oval entry port means that the closure is suited for working with uncut cable. Fitting of internal strain relief in the shrink area of the closure facilitates the transfer and distribution of the loose tubes considerably. The hinged attachment of the trays enables easy handling of the cables. It permits its use as a joint or branch-off closure. Specifications dimensions Ø mm, height 483 mm plastic casing polypropylene, UV resistant pressure tight up to 0.4 bar temperature range 40 C to +100 C capacity max. 24 splice trays (576 splices) entries: 1 x oval for uncut cable max. 3 x Ø mm, 6 x round for cable with Ø mm, as well as mini cables and micro tubes CLS CLS 03 The number and type of splice trays (heatshrink or ANT splice), entry kits and mounting kits must be ordered separately.

74 74 Closures CLS 04 Splice Management 04 Designed especially for connecting high fiber cables. The oval entry port and generously sized single fiber loose buffer chamber means that the closure is suited for working with uncut cable. The internal strain relief in the shrink area of the closure facilitates routing and distribution of the loose tubes considerably. It permits its use as a joint or branch-off closure. Specifications dimensions Ø mm, height 483 mm plastic casing polypropylene, UV resistant pressure tight up to 0.4 bar temperature range 40 C to +100 C capacity max. 16 splice trays (384 splices) max. entries: 1 x oval for uncut cable (max. 3 x Ø mm), 6 x for cable with Ø mm, as well as mini cables and micro tubes CLS CLS 04 The number and type of splice trays (heatshrink or ANT splice), entry kits and mounting kits must be ordered separately. CLS 06 Splice Management 06 Designed especially for connecting high fiber cables. The oval entry port and generously sized single fiber loose buffer chamber means that the closure is suited for working with uncut cable. The internal strain relief in the shrink area of the closure facilitates routing and distribution of the loose tubes considerably. The hinged attachment of the trays enables easy handling of the cables. It permits its use as a joint or branch-off closure. Specifications dimensions Ø mm, height 711 mm plastic casing polypropelene, UV resistant pressure tight up to 0.4 bar temperature range 40 C to +100 C capacity max. 48 splice trays (1152 splices) entries: 1 x oval for uncut cable (max. 3 x Ø mm), 6 x for cable with Ø mm, as well as mini cables and micro tubes CLS CLS 06 The number and type of splice trays (heatshrink or ANT splice), entry kits and mounting kits must be ordered separately.

75 Closures 75 CLS 07 Splice Management 07 Designed especially for connecting high fiber cables. The oval entry port and generously sized single fiber loose buffer chamber means that the closure is suited for working with uncut cable. The internal strain relief in the shrink area of the closure facilitates routing and distribution of the loose tubes considerably. It permits its use as a joint or branch-off closure. Specifications dimensions Ø mm, height 711 mm plastic casing polypropylene, UV resistant pressure tight up to 0.4 bar temperature range 40 C to +100 C capacity max. 32 splice trays (768 splices) entries: 1 x oval for uncut cable (max. 3 x Ø mm), 6 x for cable with Ø mm, as well as mini cables and micro tubes CLS CLS 07 The number and type of splice trays (heatshrink or ANT splice), entry kits and mounting kits must be ordered separately. CLT 07 Tube Management 07 Designed especially for connecting MCS tubes. A flexible tube guides the modular cable into the CLT 07. This enables tubes of the modular cable to be connected and routed. They are for use as a point for blowing in the fiber units into the micro tubes (midpoint blowing is also possible). A flexible tube enables connection to a splice management closure (CLS 06). Specifications dimensions Ø mm, height 711 mm plastic casing polypropelene, UV resistant, pressure tight up to 0.4 bar temperature range 40 C to +100 C entries 6 x Ø mm 1 x oval for 3 x Ø mm capacity max. straight connectors (MCS) at 3 mm 96 pcs/at 5 mm 72 pcs/at 10 mm 24 pcs max. gas block connectors (MCS) at 3 mm 72 pcs/at 5 mm 48 pcs/at 10 mm 16 pcs CLT CLT 07

76 76 Closures CLP 08 Splice/Patch Management 08 Specially designed for connecting high density fiber optic cables with the option of patching up to 24 fibers. Plug-in couplers can be attached to the rear of the patch module. The oval entry port and two generously sized single fiber loose buffer chambers mean that the closure is suited for working with uncut cable. Fitting of internal strain relief in the shrink area of the closure facilitates the transfer and distribution of the loose tubes considerably as well as permitting its use a joint or branch-off closure. Specifications dimensions Ø mm, height 711 mm plastic casing polypropylene, UV resistant pressure tight up to 0.4 bar temperature range 40 C to +100 C capacity max. 16 splice trays (384 splices) max. 24 adaptors and pigtails entries: 1 x oval for uncut cable 3 x Ø mm, 6 x for cable with Ø mm, as well as mini cables and micro tubes CLP XXX CLP 08 The number and type of the splice trays (heatshrink or ANT splice), adaptors and pigtails must be specified separately.

77 Closures 77 CLT 45 Tube Management 45 or CLT 45 Tube/Splice Management 45 CLT 45 For use as a joint or branch-off closure for fiber optic cables as well as modular cables (MC). Splices can be stored (e.g. reduction from 12-fiber fiber units to 2-fiber fiber units). Cable clamps are used for securing the cables. Strain relief for aramide and strength member is provided at the cable-clamping end of the splice tray bracket. The construction of the closure guarantees adherence to prescribed bending radii. Application Its robust construction, high impermeability and resistance to environmental influences make it suitable particularly for direct buried installation. CLS 45 Specifications dimensions 673 x 270 x 148 mm plastic casing polypropylene sealing resistant to acids and alkaline solutions pressure tight up to 0.4 bar temperature range 40 C to +100 C entries 4 x Ø mm max. 6 splice trays (144 splices) capacity max. straight connectors (MCs) at 3 mm 72 pcs at 5 mm 48 pcs at 10 mm 16 pcs max. gas block connectors (MCs) at 3 mm 48 pcs at 5 mm 32 pcs at 10 mm 10 pcs Closure Tube/Splice Management 45 CLT 45 AD CLT 45 with 4 entries, Ø mm CLS 45 AD H CLS 45 with 4 entries, Ø mm, with splice tray bracket and splice tray cover The number and type of splice trays (heatshrink or crimp splice), must be specified separately.

78 78 Closures CLT 52 Tube Management 52 For use as a joint or branch-off closure for modular cables (MC). Cable clamps are used for securing the cables. The twin splice tray design means that the closure is suited for working with uncut tubes and cables. The construction of the closure guarantees adherence to prescribed bending radii. Application Its robust construction, high impermeability and resistance to environmental influences make it suitable particularly for direct buried installation. Specifications dimensions 405 x 155 x 125 mm plastic casing polypropylene sealing resistant to acids and alkaline solutions pressure tight up to 0.4 bar temperature range 40 C to +100 C entries 4 x Ø mm window cut option capacity max. straight connectors (MCs) at 3 mm 48 pcs at 5 mm 24 pcs at 10 mm 7 pcs max. gas block connectors (MCs) at 3 mm 36 pcs at 5 mm 18 pcs at 10 mm 5 pcs Closure Tube Management 52 CLT 52 AD CLT 52 with 4 entries, Ø mm Application example

79 Closures 79 CLT 53 Tube Management 53 or CLU 53 Tube/Splice Management 53 For use as a joint or branch-off closure for fiber optic cables as well as modular cables (MC). Splices can be stored (e.g. reduction from 12-fiber fiber units to 2-fiber fiber units). Cable clamps are used for securing the cables. Strain relief for aramide and strength member is provided at the cable-clamping end of the splice tray bracket. The twin splice tray design means that the closure is suited for working with uncut tubes and cables. The construction of the closure guarantees adherence to prescribed bending radii. Application Its robust construction, high impermeability and resistance to environmental influences make it suitable particularly for direct buried installation. CLT 53 CLU 53 Specifications dimensions 450 x 205 x 85 mm plastic casing polypropylene sealing resistant to acids and alkaline solutions pressure tight up to 0.4 bar temperature range 40 C to +100 C entries 4 x Ø mm window cut option max. 4 splice trays (96 splices) capacity max. straight connectors (MCS) at 3 mm 72 pcs at 5 mm 48 pcs at 10 mm 16 pcs max. gas block connectors (MCS) at 3 mm 48 pcs at 5 mm 32 pcs at 10 mm 10 pcs Closure Tube/Splice Management 53 CLT 53 AD CLU 53 AD CLT 53 with 4 entries, Ø mm CLS 53 with 4 entries, Ø mm, with splice tray bracket and splice tray cover The number and type of splice trays (heatshrink or crimp splice) must be specified separately. Application example

80 80 Closures CLT 63 Tube Management 63 For use as a joint or branch-off closure for modular cables (MC). Hose clips and cable ties are used to secure the cables. The twin splice tray design and axial prestressing means that the closure is suited for working with uncut tubes and cables. The construction of the closure guarantees adherence to prescribed bending radii. Application Its especially robust construction, high impermeability and strong resistance to environmental influences make the closure suitable particularly for sewer system installation. Specifications dimensions 500 x 233 x 70 mm casing stainless steel sealing more resistant to acids and alkaline solutions EPDM seal pressure tight up to 0.4 bar temperature range 40 C to +100 C entries 6 x Ø mm window cut option capacity max. straight connectors (MCS) at 3 mm 72 pcs at 5 mm 48 pcs at 10 mm 16 pcs max. gas block connectors (MCs) at 3 mm 48 pcs at 5 mm 32 pcs at 10 mm 10 pcs Closure Tube Management 63 CLT 63 AD CLT 63 with 6 entries, Ø mm Application example

81 Closures 81 Closure MC Tubular Heatshrink Brief description to connect two modular cables for cut cable only for modular cable direct buried (reinforced) the closure can be re-opened/removed Product includes Heatshrink closure, connector protection shield, aluminium cable protection shield, connectors (number and size of the connectors depends on the type of modular cable) CLT MCTHS way closure CLT MCTHS way closure CLT MCTHS way closure CLT MCTHS way closure CLT MCTHS way closure CLT MCTHS way closure CLT MCTHS way closure CLT MCTHS way closure CLT MCTHS way closure CLT MCTHS way closure CLT MCTHS way closure CLT MCTHS way closure CLT MCTHS way closure CLT MCTHS way closure on request 1 to 7-way closure 3 mm MCS 5 mm MCS 10 mm MCS Wrap-around and heatshrink closure Closure MC Wrap-around Heatshrink Brief description to connect two modular cables for cut/uncut cable (repair closure) for modular cable duct install and direct buried (reinforced) the closure can be re-opened/removed Product includes Wrap-around heatshrink closure, connector protection shield, aluminium cable protection shield, connectors (number and size of the connectors depends on the type of modular cable) CLT MCWHS CLT MCWHS CLT MCWHS CLT MCWHS CLT MCWHS CLT MCWHS CLT MCWHS CLT MCWHS on request on request on request 7-way closure 12-way closure 19-way closure 24-way closure 7-way closure 12-way closure 19-way closure 24-way closure 4-way closure 5-way closure 7-way closure 3 mm MCS 5 mm MCS 10 mm MCS

82 82 Closures Basic Mounting Kit Used for mounting the Closures on a wall or as a base component for all other mounting applications. CLAC M 00 for closure size 01 CLAC M 00 for closure sizes Handhole Mounting Kit For mounting closures in a handhole: length 1165 mm. The required Basic Mounting Kit must be ordered separately. CLAC H 00 1-way for closure sizes CLAC H 00 3-way for closure sizes Pole Mounting Kit For fitting closures to a lattice mast. The required Basic Mounting Kit must be ordered separately. CLAC P 00 for closure sizes Street Cabinet Mounting Kit For fitting the closures in a Size 5 Street Cabinet. The required Basic Mounting Kit must be ordered separately. CLAC S 00 for closure sizes External Strain Relief Kit To provide the cable with strain relief outside the closure. You will find the right cable clamps on page 83. CLAC E 00 for closure size 01 CLAC E 00 for closure sizes 03 08

83 Closures 83 Cable Entry Set Cable Entry Set CLAC 01A for closure size 01 Ø mm CLAC 01B for closure size 01 oval 2 x Ø mm CLAC 03A for closure sizes Ø mm CLAC 03B for closure sizes oval 3 x Ø mm CLAC 00C Branching clamp for oval entry 4-Way Port Kit Used to feed four micro cables into a cable entry port. CLAC 03AC for closure sizes Tube/Splice Connection Set Used to connect a splice management closure with a tube management closure or a splice/tube management closure with a modular cable (in a handhole). CLAC 03D Connection Set from splice management sizes to tube management module Street Cabinet size 05 CLAC 03D from tube management sizes to a modular cable in a handhole CLAC 03D from splice management sizes to tube management size 07 Cable Clamps 02 These are used to absorb tension, pressure and torsion impacting on the cable. These clamps are made of aluminium due to the high mechanical demands when absorbing the strain on a OPGW. Cable Clamps 02 CLAC CL Ø 10 mm CLAC CL Ø 12 mm CLAC CL Ø 13.7 mm CLAC CL Ø 14 mm CLAC CL Ø 15 mm CLAC CL Ø 16 mm CLAC CL Ø 17.1 mm CLAC CL Ø 18 mm CLAC CL Ø 20 mm CLAC CL Ø 30 mm

84 84 Distribution Boxes Distribution Boxes Distribution boxes are used as a connection or branch-off box for the Modular Cable System (MCS) or for dividing tubes of fiber optic cables. Features n connecting different modular cables n tube or tube/splice boxes n modular construction n uncut cable entry Our flexible product range provides many options: versions DBU 08 and DBU 09 provide the option to splice fibers with fibers (e.g. converting one 12-fiber unit to six 2-fiber units), to splice fibers on pigtails or to splice fibers on pigtails mounted in a patch panel the tube/splice versions have a higher cover and include the necessary additional materials, such as splice tray holders, splice tray covers and adaptor plate (number and type of splice tray are to be ordered separately heatshrink or ANT splice protector) available with lock on request thanks to their compact measurements and unobtrusive product design, they can be used as wall-mount boxes in public areas the cable entry is available with standard foam rubber and cable tie mounting or with separate accessory sets (cable strain relief clamps, tube glands or entries with PG glands incl. bar for clamps and Kevlar strain relief termination point); please state choice when ordering also available as larger-width versions for 600 mm and 800 mm boxes (DBT46 and DBT49) further information on request. n space-saving n high flexibility n easy installation n unobtrusive design

85 Distribution Boxes 85 DBT 01 Tube Management 01 This distribution box allows you to connect (or divide) a maximum of two 19-way modular cables with a tube diameter of 5 mm. The construction of the box enables uncut processing of cables. Suitable for wall mounting and for installation in cable channels. Application For inside, e.g. for the connection of an outdoor modular cable to an indoor modular cable (at building entry). A wide range of accessories supports various other applications. Specifications dimensions 307 x 65 x 62 mm (l x w x h) casing powder coated steel sheet RAL 7035 protection IP45 number of entries 1 entry per side the number of modular cables per entry can be freely chosen, but the sum of the diameters must be less than 50 mm the tube cannot be bent 180 in the box tube diameter of 3 mm max. 18 pcs gas block connectors max. 28 pcs straight connectors 5 mm max. 12 pcs gas block connectors max. 19 pcs straight connectors 10 mm max. 4 pcs gas block connectors max. 6 pcs straight connectors Tube Management 01 DBT 01S DBT 01 with foam rubber entry 6 pcs cable ties 280 x 4.5 mm wall mounting kit Application examples

86 86 Distribution Boxes DBT 02 Tube Management 02 This distribution box allows you to connect (or divide) a maximum of two 24-way modular cables with a tube diameter of 5 mm. The construction of the box enables uncut processing of cables. Suitable for wall mounting and for installation in cable channels. Application For inside, e.g. for the connection of an outdoor modular cable to an indoor modular cable (at building entry). A wide range of accessories supports various other applications. Specifications dimensions 394 x 95 x 62 mm (l x w x h) casing powder coated steel sheet RAL 7035 protection IP45 number of entries 1 entry per side the number of modular cables per entry can be freely chosen, but the sum of the diameters must be less than 65 mm the tubes cannot be bent 180 in the box tube diameter of 3 mm max. 36 pcs gas block connectors max. 45 pcs straight connectors 5 mm max. 24 pcs gas block connectors max. 30 pcs straight connectors 10 mm max. 8 pcs gas block connectors max. 10 pcs straight connectors Tube Management 02 DBT 02S DBT 02 with foam rubber entry 6 pcs cable ties 280 x 4.5 mm wall mounting kit Application example

87 Distribution Boxes 87 DBT 05 Tube Management 05 This distribution box allows you to connect a maximum of four 19-way modular cables with tubes of a diameter up to 5 mm. The larger width of the box makes a 180 bend of tubes in the box possible. Suitable for wall mounting and for installation in cable channels. Application For inside, e.g. for the connection of an outdoor modular cable to an indoor modular cable (at building entry). A wide range of accessories supports various other applications. Specifications dimensions 307 x 190 x 62 (l x w x h) casing powder coated steel sheet RAL 7035 protection IP45 number of entries 2 per side the number of modular cables per entry can be freely chosen, but the sum of the diameters must be less than 65 mm tube diameter of 3 mm max. 48 pcs gas block connectors max. 54 pcs straight connectors 5 mm max. 30 pcs gas block connectors max. 36 pcs straight connectors 10 mm max. 12 pcs gas block connectors max. 18 pcs straight connectors Tube Management 05 DBT 05S DBT 05 with foam rubber entry 12 pcs cable ties 280 x 4.5 mm wall mounting kit Application example

88 88 Distribution Boxes DBT 06 Tube Management 06 This distribution box allows you to connect a maximum of four 24-way modular cables with tubes of a diameter up to 5 mm. The construction of the box allows you to use uncut cable and to bend the tubes 180º in the box. Suitable for wall mounting and for installation in cable channels. Application For inside, e.g. for the connection of an outdoor modular cable to an indoor modular cable (at building entry). A wide range of accessories supports various other applications. Specifications dimensions 394 x 190 x 62 mm (l x w x h) casing powder coated steel sheet RAL 7035 protection IP45 number of entries 2 per side the number of modular cables per entry can be freely chosen, but the sum of the diameters must be less than 65 mm tube diameter of 3 mm max. 64 pcs gas block connectors max. 72 pcs straight connectors 5 mm max. 48 pcs gas block connectors max. 56 pcs straight connectors 10 mm max. 16 pcs gas block connectors max. 24 pcs straight connectors Tube Management 06 DBT 06S DBT 06 with foam rubber entry 12 pcs cable ties 280 x 4.5 mm wall mounting kit Application example

89 Distribution Boxes 89 DBU 08 Tube/Splice Management 08 This distribution box allows you to connect a maximum of four 19-way modular cables with tubes of a diameter up to 5 mm. The construction of the box allows you to use uncut cable and to bend the tubes 180º in the box. The available splicing capacity allows you to divide or combine fiber units, e.g. a tube with a 5 mm diameter with a 12-fiber unit to 6 tubes with a 5 mm or 3 mm diameter with a 2-fiber unit each. Suitable for wall mounting and for installation in cable channels. Application For inside, e.g. for the connection of an outdoor modular cable to an indoor modular cable (at building entry). A wide range of accessories supports various other applications. Specifications dimensions 307 x 190 x 96 mm (l x w x h) casing powder coated steel sheet RAL 7035 protection IP45 number of entries 2 per side the number of modular cables per entry can be freely chosen, but the sum of the diameters must be less than 65 mm the tubes cannot be bent 180 in the box tube diameter of 3 mm max. 48 pcs gas block connectors max. 54 pcs straight connectors 5 mm max. 30 pcs gas block connectors max. 36 pcs straight connectors 10 mm max. 12 pcs gas block connectors max. 18 pcs straight connectors max. 6 pcs splice trays (144 splices) Tube/Splice Management 08 DBU 08S Application example DBU 08 with foam rubber entry Splice tray holder and cover 12 pcs cable ties 280 x 4.5 mm wall mounting kit The number and type of the splice trays have to be ordered separately (heatshrink or ANT splice protector).

90 90 Distribution Boxes DBU 09 Tube/Splice Management 09 This distribution box allows you to connect a maximum of four 24-way modular cables with tubes of a diameter up to 5 mm. The construction of the box allows you to use uncut cable and to bend the tubes 180º in the box. The available splicing capacity allows you to divide or combine fiber units, e.g. a tube with a 5 mm diameter with a 12-fiber unit to 6 tubes with a 5 mm or 3 mm diameter with a 2-fiber unit each. Suitable for wall mounting and for installation in cable channels. Application For inside, e.g. for the connection of an outdoor modular cable to an indoor modular cable (at building entry). A wide range of accessories supports various other applications. Specifications dimensions 394 x 190 x 96 mm (l x w x h) casing powder coated steel RAL 7035 protection IP45 number of entries 2 per side the number of modular cables per entry can be freely chosen, but the sum of the diameters must be less than 65 mm tube diameter of 3 mm max. 18 pcs gas block connectors max. 28 pcs straight connectors 5 mm max. 12 pcs gas block connectors max. 19 pcs straight connectors 10 mm max. 4 pcs gas block connectors max. 6 pcs straight connectors max. 6 pcs splice trays (144 splices) Tube/Splice Management 09 DBU 09S DBU 09 with foam rubber entry splice tray holder splice tray cover 12 pcs cable ties 280 x 4.5 mm wall mounting kit The number and type of the splice trays have to be ordered separately (heatshrink or ANT splice protector). Application example

91 Distribution Boxes 91 Tube Gland Kit For connecting flexible tube to the distribution boxes and for dividing the individual loose tubes into the different splice boxes. The set includes 2.2 m of tube per entry. Tube Gland Kit DBAC T01 TGS for DBT 01 1 x Ø 20 mm DBAC T02 TGS for DBT and DBU 08, 09 2 x Ø 20 mm DBAC T01 TGS for DBT 01 4 x Ø 13 mm DBAC T02 TGS for DBT and DBU 08, 09 6 x Ø 13 mm DBAC T01 TGS for DBT 01 6 x Ø 10 mm DBAC T02 TGS for DBT and DBU 08, 09 8 x Ø 10 mm Cable Clamp Kit For improved securing of modular cables with a larger diameter. One cable (uncut or cut) is possible per entry. Use tape to compensate for diameter adjustment. Cable Clamp Kit DBAC T01 CSR for DBT 01 Ø mm DBAC T02 CSR for DBT and DBU 08, 09 Ø mm PG Gland Kit Used for connecting fiber optic cables, breakout cables and patch cables to the distribution boxes. The kit includes a Kevlar and strength member bracket. PG Gland Kit DBAC T01 PGG for DBT 01 1 x Ø 9 18 mm DBAC T02 PGG for DBT x Ø 9 18 mm/ and DBU 08, 09 1 x Ø 9 14 mm

92 92 Termination Boxes Termination Boxes Termination boxes are used as splice/patch management boxes in the access area. Features Our flexible product range provides many options: all boxes can be fitted with splice trays for heatshrink or ANT splice protection all termination boxes are delivered with splice tray covers, matching cable entries and various accessories the construction of the termination boxes guarantees adherence to prescribed bending radii available with lock on request thanks to their compact measurements and unobtrusive product design, they can be used as wall-mount boxes in public areas when ordering please state the connector type (e.g. FC/PC, ST, SC, E2000) factory installed combinations of boxes, pigtails and adaptors are available to reduce installation time substantially. n splice/patch management n available as table/wall model n space-saving n fiber to the desk n high flexibility n easy installation

93 Termination Boxes 93 TBP 02 Splice/Patch Management 02 Metallic termination box with a front patch panel for a fiber optic cable with max. 4 fibers. The lateral mounted splice holder guarantees the specified bending radius. The box has a longer cover as a protection for the connectors outside. The TBP 02 will be supplied including the matching cable entries and various accessories. Application especially for fiber to the desk and fiber to the home solutions Specifications dimensions 180 x 77.5 x 31 mm (l x w x h) casing powder coated steel sheet RAL 9002 protection temperature range 40 C to +100 C capacity max. 4 splices max. 4 adaptors max. 1 x PG 13 PVC Splice/Patch Management 02 TBP02 S00 XXX XXX = number and type of adaptor 04C = 4 pcs SC/PC 02F = 2 pcs FC/PC 04E = 4 pcs E S = 2 pcs ST 1 x PG 13 (Ø 6 12 mm), wall mounting kit ACSH 06H splice holder for max. 6 heatshrink splice protectors ACSH 06A splice holder for max. 6 ANT splice protectors The number and type of splice trays (heatshrink or ANT splice protector), adaptors and pigtails have to be ordered separately. Application example

94 94 Termination Boxes TBP K2 Splice/Patch Management K2 Plastic termination box with a front patch panel for a fiber optic cable with max. 2 fibers. The lateral mounted splice holder guarantees the specified bending radius. The box has a longer cover as a protection for the connectors outside. The TBP K2 will be supplied including the matching cable entries and various accessories. Application especially for fiber to the desk and fiber to the home solutions Specifications dimensions 174 x 98 x 28 mm (l x w x h) casing polycarbonate, halogen-free RAL 7035 protection temperature range 40 C to +100 C capacity 2 fusion splices, mechanical splices or fiber unit splitters max. 2 adaptors (e.g. 2 x SC) max. cable diameter 10 mm Splice/Patch Management K2 TBPK2 S00 XXX XXX = number and type of adaptor 02C = 2 pcs SC/PC 02E = 2 pcs E x cable entry set 3 (Ø 3 10 mm), wall mounting kit The number and type of adaptors and pigtails have to be ordered separately.

95 Termination Boxes 95 TBP H1 Splice/Patch Management H1 Metallic termination box with a front patch panel for a fiber optic cable with max. 12 fibers. Cable entry is possible from above or below, straight or diagonally. The TBP H1 will be supplied including the matching cable entries and various accessories. Application especially suitable for mounting on a top-hat rail Specifications dimensions 125 x 34 x mm (l x w x h) casing powder coated steel sheet RAL 7035 protection temperature range 40 C to +100 C max. 1 splice tray (to be ordered separately) capacity max. 12 splices max. 12 pigtails and adaptors max. 2 x PG 11 PVC (Ø 6 9 mm) standard: 1 x PG 11 PVC (Ø 6 9 mm) + 3 x PG 11 blind Splice/Patch Management H1 TBPH1 S00 XXX XXX = number and type of adaptor 06G = 6 pcs SC/PC-Duplex 06T = 6 pcs ST-Duplex 06J = 6 pcs E2000-Duplex 1 x PG 11 (Ø 6 9 mm), 3 x PG 11 blind, kit for mounting on a top-hat rail Application example

96 96 Termination Boxes TBT HA Tube Management HA or TBT HU Tube Management HU Available as on-wall (HA) and as in-wall (HU). The termination box is supplied with diaphragm bushing nipples. The box is lockable. Application home termination box for a Modular Cable System Specifications dimensions 212 x 112 x 64.5 (l x w x h) casing zinc-coated steel sheet with power-coated steel cover RAL 7035 protection temperature range 40 C to +100 C capacity max. 2 MCS single tubes in and out max. 2 pcs gas block tube connectors TBTHA TBTHU Tube Management TBT HA on-wall version with lock and diaphragm bushing nipples TBT HU in-wall version with lock and diaphragm bushing nipples masonry case cable length in the box approx. 190 mm corer cable lock flexible tube

97 Termination Boxes 97 TBP 06 Splice/Patch Management 06 Plastic termination box including a splice tray holder and a patch panel. The box has a cover, which is locked with screws. In the box fiber optic cables can be spliced together or to pigtails. The pigtails can be installed in adaptors in the patch panel. Enclosed adaptors and pigtails guarantee a dust free and easily accessible cable end closure for up to 12 fibers on the patch panel. Cable strain relief is included. Splitters can also be fitted inside. Application for indoor use only Specifications dimensions 254 x 180 x 90 mm (l x w x h) casing polycarbonate, halogen-free RAL 7035 mounting plate/ powder coated steel sheet patch panels RAL 7032 sealing Neoprene protection temperature range 40 C to +100 C max. 2 splice trays (to be ordered separately) capacity max. 48 splices max. 12 pigtails and adaptors max. 2 x PG 16 PVC (Ø 7 14 mm) + 2 x PG 16 PVC (6 x Ø 3 mm) Splice/Patch Management 06 TBP06 S XXX = number and type of adaptor 12C = 12 pcs SC/PC 12F = 12 pcs FC/PC 12E = 12 pcs E S = 12 pcs ST 2 x PG 16 (Ø 7 14 mm), 2 x PG 16 (6 x Ø 3 mm) wall mounting kit The number and type of splice trays (heatshrink or ANT splice protector), adaptors and pigtails have to be ordered separately. Application example

98 98 Termination Boxes TBS 06 Splice Management 06 Plastic termination box including a splice tray holder. The box has a cover, which is locked with screws. The inside consists of a splice tray holder with up to 6 splice trays (144 splices). Cable strain relief is included. Splitters can also be fitted inside. Application the box is integrated mainly into the Street Cabinet 01 for indoor use only Specifications dimensions 254 x 180 x 90 mm (l x w x h) casing polycarbonate, halogen-free RAL 7035 mounting plate powder coated steel sheet RAL 7032 protection sealing Neoprene temperature range 40 C to +100 C max. 6 splice trays (to be ordered separately) capacity max. 144 splices max. 2 x PG 16 PVC (Ø 7 14 mm) + 2 x PG 16 PVC (6 x Ø 3 mm) Splice Management 06 TBS06 S x PG 16 (Ø 7 14 mm) 2 x PG 16 (6 x Ø 3 mm) wall mounting kit The number and type of splice trays (heatshrink or ANT splice protector) have to be ordered separately.

99 Termination Boxes 99 TBP 07 Splice/Patch Management 07 Plastic termination box including a splice tray holder and a patch panel. The box has a cover, which is locked with screws. The interior consists of separate swivel sections (highly user friendly) on which splice and patch connections can be made. Enclosed adaptors and pigtails guarantee a dust free and easily accessible cable end closure for up to 24-fiber FO cables. Cable strain relief is included. Splitters can also be fitted inside. Application for indoor use only Specifications dimensions 254 x 360 x 110 mm (l x w x h) casing polycarbonate, halogen-free RAL 7035 mounting plate/ powder coated steel sheet components RAL 7032 protection sealing Neoprene temperature range 40 C to +100 C max. 6 splice trays (to be ordered separately) capacity max. 144 splices max. 24 pigtails and adaptors max. 2 x PG 16 PVC (Ø 7 14 mm) + 6 x PG 16 PVC (6 x Ø 3 mm) Splice/Patch Management 07 TBP07 S00 XXX XXX = number and type of adaptor 24C 16F 24E 16S = 24 pcs SC/PC = 16 pcs FC/PC = 24 pcs E2000 = 16 pcs ST 2 x PG 16 (Ø 7 14 mm), 6 x PG 16 (6 x Ø 3 mm) wall mounting kit The number and type of splice trays (heatshrink or ANT splice protector), adaptors and pigtails have to be ordered separately.

100 100 Termination Boxes TBS 07 Splice Management 07 Plastic termination box including a splice tray holder. The box has a cover, which is locked with screws. The inside consists of a splice tray holder with up to 12 splice trays (288 splices). Cable strain relief is included. Splitters can also be fitted inside. Application the box is integrated mainly into the Street Cabinet 01 for indoor use only Specifications dimensions 254 x 360 x 110 mm (l x w x h) casing polycarbonate, halogen-free RAL 7035 mounting plate powder coated steel sheet RAL 7032 protection sealing Neoprene temperature range 40 C to +100 C max. 12 splice trays (to be ordered separately) capacity max. 288 splices max. 2 x PG 16 PVC (Ø 7 14 mm) + 6 x PG 16 PVC (6 x Ø 3 mm) Splice Management 07 TBS07 S x PG 16 (Ø 7 14 mm) 6 x PG 16 (6 x Ø 3 mm) wall mounting kit The number and type of splice trays (heatshrink or ANT splice protector) have to be ordered separately. Application example

101 Termination Boxes 101 TBP 16 Splice/Patch Management 16 Plastic termination box including a splice tray holder and a patch panel. The box has a cover, which is locked with screws. In the box fiber optic cables can be spliced together or to pigtails. The pigtails can be installed in adaptors in the patch panel. Enclosed adaptors and pigtails guarantee a dust free and easily accessible cable end closure for up to 24-fiber FO cables. Splitters can also be fitted inside. Application for indoor use only Specifications dimensions 254 x 180 x 110 mm (l x w x h) casing polycarbonate, halogen-free RAL 7035 mounting plate/ powder coated steel sheet patch panel RAL 7032 protection sealing Neoprene temperature range 40 C to +100 C max. 2 splice trays (to be ordered separately) capacity max. 48 splices max. 24 pigtails and adaptors max. 2 x PG 16 PVC (Ø 7 14 mm) + 2 x PG 16 PVC (6 x Ø 3 mm) Splice/Patch Management 16 TBP16 S00 XXX XXX = number and type of adaptor 24C = 24 pcs SC/PC 16F = 16 pcs FC/PC 24E = 24 pcs E S = 16 pcs ST 2 x PG 16 (Ø 7 14 mm), 6 x PG 16 (6 x Ø 3 mm) wall mounting kit The number and type of splice trays (heatshrink or ANT splice protector), adaptors and pigtails have to be ordered separately.

102 102 Termination Boxes TBP 17 Splice/Patch Management 17 Plastic termination box including a splice tray holder and a patch panel. The box has a cover, which is locked with screws. The interior consists of separate swivel sections (highly user friendly) on which splice and patch connections can be made. Enclosed adaptors and pigtails guarantee a dust free and easily accessible cable end closure for up to 48-fiber FO cables. Cable strain relief is included. Splitters can also be fitted inside. Application for indoor use only Specifications dimensions 254 x 360 x 165 mm (l x w x h) casing polycarbonate, halogen-free RAL 7035 mounting plate/ powder coated steel sheet components RAL 7032 protection sealing Neoprene temperature range 40 C to +100 C max. 6 splice trays (to be ordered separately) capacity max. 144 splices max. 48 pigtails and adaptors max. 2 x PG 16 PVC (Ø 7 14 mm) + 2 x PG 16 PVC (6 x Ø 3 mm) Splice/Patch Management 17 TBP17 S00 XXx XXX = number and type of adaptor 48C 42F 48E 42S = 48 pcs SC/PC = 42 pcs FC/PC = 48 pcs E2000 = 42 pcs ST 2 x PG 16 (Ø 7 14 mm), 6 x PG 16 (6 x Ø 3 mm) wall mounting kit The number and type of splice trays (heatshrink or ANT splice protector), adaptors and pigtails have to be ordered separately.

103 Termination Boxes 103 TBP E0 Splice/Patch Management E0 Plastic termination box including a splice tray holder and a patch panel. The box has a cover, which is locked with screws. In the box fiber optic cables can be spliced together or to pigtails. The pigtails are installed in adaptors in an organised fashion. The box guarantees dust free and easily accessible cable end closure for 2 to 4-fiber FO cables. Application for indoor use only Specifications dimensions 130 x 94 x 57 mm (l x w x h) casing polycarbonate, halogen-free RAL 7035 mounting plate/ powder coated steel sheet components RAL 7032 protection sealing Neoprene temperature range 40 C to +100 C max. 1 splice tray holder (to be ordered separately) capacity max. 4 splices max. 4 adaptors max. 1 x PG 11 PVC (6 9 mm) Splice/Patch Management EO TBPE0 S XXX = number and type of adaptor 04C 04F 04E 04S = 4 pcs SC/PC = 4 pcs FC/PC = 4 pcs E2000 = 4 pcs ST ACSH 06H ACSH 06A x PG 11 PVC (6 9), wall mounting kit 1 splice holder for max. 6 heatshrink splice protectors 1 splice holder for max. 6 ANT splice protectors The number and type of splice trays (heatshrink or ANT splice protector), adaptors and pigtails have to be ordered separately. Application example

104 104 Termination Boxes TBP E1 Splice/Patch Management E1 Plastic termination box including a splice tray holder and a patch panel. The box has a cover, which is locked with screws. In the box fiber optic cables can be spliced together or to pigtails. The pigtails are installed in adaptors in an organised fashion. The box guarantees dust free and easily accessible cable end closure for 2 to 8-fiber FO cables. Application for indoor use only Specifications dimensions 260 x 157 x 62 mm (l x w x h) casing ABS, RAL 7035 mounting plate/ powder coated steel sheet patch panel RAL 7032 protection temperature range 40 C to +100 C max. 1 splice tray (to be ordered separately) capacity max. 24 splices max. 8 pigtails and adaptors max. 2 x PG 16 brass (Ø 7 14 mm) and 1 x PG 16 blind standard: 1 x PG 16 PVC (Ø 7 14 mm) + 1 x PG 16 blind Splice/Patch Management E1 TBPE1 S00 XXX XXX = number and type of adaptor 08C 08F 08E 08S = 8 pcs SC/PC = 8 pcs FC/PC = 8 pcs E2000 = 8 pcs ST 11 x PG 16 brass (Ø 7 14 mm) + 1 x PG 16 blind wall mounting kit The number and type of splice trays (heatshrink or ANT splice protector), adaptors and pigtails have to be ordered separately. Application example

105 Termination Boxes 105 TBP E2 Splice/Patch Management E2 Plastic termination box including a splice tray holder and a patch panel. The box has a cover, which is locked with screws. In the box fiber optic cables can be spliced together or to pigtails. The pigtails are installed in adaptors in an organised fashion. The box guarantees dust free and easily accessible cable end closure for 2 to 24-fiber FO cables. Application for indoor use only Specifications dimensions 260 x 290 x 62 mm (l x w x h) casing ABS, RAL 7035 mounting plate/ powder coated steel sheet patch panel RAL 7032 protection temperature range 40 C to +100 C max. 2 splice trays (to be ordered separately) capacity max. 48 splices max. 24 pigtails and adaptors max. 2 x PG 16 brass (Ø 7 14 mm) standard: 1 x PG 16 PVC (Ø 7 14 mm) + 1 x PG 16 blind Splice/Patch Management E2 TBPE2 S00 XXX XXX = number and type of adaptor 24C 24F 24E 24S = 24 pcs SC/PC = 24 pcs FC/PC = 24 pcs E2000 = 24 pcs ST 1 x PG 16 brass (Ø 7 14 mm) + 1 x PG 16 blind wall mounting kit The number and type of splice trays (heatshrink or ANT splice protector), adaptors and pigtails have to be ordered separately. Application example

106 106 Termination Boxes TBP E3 Splice/Patch Management E3 Metallic termination box including a splice tray holder and a patch panel. The box has a cover, which is locked with screws. The interior consists of separate swivel sections (highly user friendly) on which splice and patch connections can be made. Enclosed adaptors and pigtails guarantee a dust free and easily accessible cable end closure for up to 24-fiber FO cables. Cable strain relief is included. Splitters can also be fitted inside. Application for indoor use only Specifications dimensions 456 x 216 x 62 mm (l x w xh) casing aluminium, RAL 7032 mounting plate/ powder coated steel sheet patch panels RAL 7032 protection temperature range 40 C to +100 C max. 6 splice trays (to be ordered separately) capacity max. 48 splices max. 24 pigtails and adaptors max. 6 x PG 16 PVC (Ø 7 14 mm) Splice/Patch Management E3 TBPE3 S00 XXX XXX = number and type of adaptor 24C = 24 pcs SC/PC 16F = 16 pcs FC/PC 24E = 24 pcs E S = 16 pcs ST 2 x PG 16 (Ø 7 14 mm), 4 x PG 16 (6 x Ø 3 mm) wall mounting kit The number and type of splice trays (heatshrink or ANT splice protector), adaptors and pigtails have to be ordered separately. Application example

107 Termination Boxes 107 TBP E7 Patch-Management E7 Plastic termination box including a patch panel. The box has a swivel cover which can be locked. Enclosed adaptors and pigtails guarantee a dust free and easily accessible breakout cable end closure for up to 12 fibers on the patch panel. Special cable glands for breakout cable and patch cords are built in. Application for indoor use only Specifications dimensions 180 x 180 x 90 mm (l x w x h) casing polycarbonate, halogen-free RAL 7035 patch panel powder coated steel sheet RAL 7032 protection sealing Neoprene temperature range 40 C to +100 C max. 1 splice tray holder (to be ordered separately) capacity max. 12 pigtails and adaptors max. 1 x PG 16 brass (Ø 7 14 mm) + 2 x PG 16 PVC (6 x Ø 3 mm) standard: 1 x PG 16 brass (Ø 7 14 mm) + 1 x PG 16 PVC (6 x Ø 3 mm) Splice/Patch Management E7 TBPE7 S XXX = number and type of adaptor 12C = 12 pcs SC/PC 12F = 12 pcs FC/PC 12E = 12 pcs E S = 12 pcs ST 1 x PG 16 brass (Ø 7 14 mm) 1 x PG 16 (6 x Ø 3 mm) wall mounting kit The number and type of adaptors have to be ordered separately.

108 108 Termination Boxes TBP P6 Splice/Patch Management P6 Box-patch system with two lockable swivel covers. Different lock combinations provide option of separate user authorisations. Inner adaptors and pigtails guarantee dust free and user safe cable end and distribution box for up to 6 FO cables. An uncut FO cable entry for up to 144 fibres has been prepared on one side. Application for indoor use only Specifications dimensions 450 x 400 x 150 mm (l x w x h) casing steel sheet, RAL 7035 mounting plate/ powder coated steel sheet patch panels RAL 7035 protection temperature range 40 C to +100 C capacity max. 48 adaptors, SC and E2000 first side 8 splice trays (to be ordered separately) 2 x PG 21 PVC (Ø 9 18 mm) 1 x PG 16 PVC (Ø 6 13 mm) 2 x PG 21 PVC blind 1 x PG 16 PVC blind 1 x oval entry for 2 cables (Ø mm) second side entry for breakout cable with strip brushes wall mounting and other accessories included Splice/Patch Management P6 TBPP6 Z00 XXX XXX = number and type of adaptor 48C = 48 pcs SC/PC 48F = 48 pcs FC/PC 48E = 48 pcs E S = 48 pcs ST (Introduction see above), wall mounting kit The number and type of splice trays (heatshrink or ANT splice protector), adaptors and pigtails have to be ordered separately. Application example

109 Termination Boxes 109 TBP P7 Splice/Patch Management P7 Box-patch system with two lockable swivel covers. Different lock combinations provide option of separate user authorisations. Inner adaptors and pigtails guarantee dust free and user safe cable end and distribution box for up to 6 FO cables. An uncut FO cable entry for up to 144 fibers has been prepared on one side. Application for indoor use only Specifications dimensions 450 x 400 x 150 mm (l x w x h) casing steel sheet, RAL 7035 mounting plate/ powder coated steel sheet patch panels RAL 7035 protection temperature range 40 C to +100 C capacity max. 48 adaptors, SC and E2000 first side 16 splice trays (to be ordered separately) 2 x PG 21 PVC (Ø 9 18 mm) 1 x PG 16 PVC (Ø 6 13 mm) 2 x PG 21 PVC blind 1 x PG 16 PVC blind 1 x oval entry for 2 cables (Ø mm) second side entry for breakout cable with strip brushes wall mounting and other accessories included Splice/Patch Management P7 TBPP7 Z00 XXX XXX = number and type of adaptor 72C = 72 pcs SC/PC 72F = 72 pcs FC/PC 72E = 72 pcs E S = 72 pcs ST (Introduction see above), wall mounting kit The number and type of splice trays (heatshrink or ANT splice protector), adaptors and pigtails have to be ordered separately.

110 110 Termination Boxes TBP P8 Splice/Patch Management P8 Box-patch system with two lockable swivel covers. Different lock combinations provide option of separate user authorisations. Inner adaptors and pigtails guarantee dust free and user safe cable end and distribution box for up to 6 FO cables. An uncut FO cable entry for up to 96 fibers has been prepared on one side. Swivel splice trays improve the ease of installation. Application for indoor use only Specifications dimensions 550 x 330 x 113 mm (l x w x h) casing steel sheet, RAL 7032 mounting plate/ powder coated steel sheet patch panels RAL 7032 protection sealing Neoprene temperature range 40 C to +100 C capacity max. 24 adaptors first side max. 6 splice trays (to be ordered separately) max. 2 x PG 21 PVC (Ø 9 18 mm) second side max. 6 splice trays (to be ordered separately) max. 4 x PG 11 (Ø 6 9 mm + 2 x PG 13 (Ø 6 12 mm) wall mounting and other accessories included Splice/Patch Management P8 TBPP8 Z00 XXX XXX = number and type of adaptor 24C = 24 pcs SC/PC 24F = 24 pcs FC/PC 24E = 24 pcs E S = 24 pcs ST (Introduction see above), wall mounting kit The number and type of splice trays (heatshrink or ANT splice protector), adaptors and pigtails have to be ordered separately.

111 Termination Boxes 111 TBP A2 Splice/Patch Management A2 Plastic termination box with optional lock and swivel door. Cable distribution box for up to 4 cables also available as version for uncut cable processing. The interior consists of separate swivel sections (highly user friendly) on which splice and patch connections can be made. The termination box contains a large-dimensioned store for extra cable pigtail lengths; the cable strain relief system is pre-fitted. Additional splitters can be fitted. Application for installation on walls, cable stores, wood, concrete and lattice masts Specifications dimensions 330 x 200 x 430 mm (l x w x h) casing glass fiber reinforced polyester RAL 7035 mounting plate/ powder coated steel sheet components RAL 7032 protection temperature range 50 ºC to +130 ºC max. 12 splice trays (to be ordered separately) capacity max. 288 splices max. 48 pigtails and adaptors max. 4 x PG 21 PVC (Ø 9 18 mm) available for different mounting kits for installation on walls, cable stores, wood, concrete and lattice masts Splice/Patch Management A2 TBPA2 100 XXX XXX = number and type of adaptor 48C = 48 pcs SC/PC 36F = 36 pcs FC/PC 48E = 48 pcs E S = 36 pcs ST 2 x PG 21 (Ø 9 18 mm), 2 x PG 21 blind wall mounting kit The number and type of splice trays (heatshrink or ANT splice protector), adaptors and pigtails have to be ordered separately. Application example

112 112 Termination Boxes TBP M2 Splice/Patch Management M2 Patch system with quick clamps in a dense aluminium box with 8 slanted cable entries and a cable relief system. Models for uncut cable processing are available. The termination box includes a splice tray compartment, large-dimensioned storage for extra cable pigtail length and single switch patch construction sections. The pigtails can be installed in adaptors in the patch panel. Inside adaptors and pigtails guarantee dust free and easily accessible cable termination. Splitters can also be fitted inside. Application indoors and outdoors with a Street Cabinet Specifications dimensions 630 x 650 x 150 mm (l x w x h) casing aluminium, RAL 7032 splice tray holder/ powder coated steel sheet components RAL 7035 protection temperature range 40 C to +100 C max. 45 splice trays (to be ordered separately) capacity max splices max. 6 swivel patch panels max. 144 pigtails and adaptors max. 4 x PG 21 PVC (Ø 9 18 mm) 4 x PG 16 PVC (Ø 7 14 mm) adaptation set for uncut cable available Splice/Patch Management M2 TBPM2 S00 XXY XX = number of holes 24 = 24 holes 48 = 48 holes 72 = 72 holes 96 = 96 holes C2 = 120 holes C4 = 144 holes Y = adaptor type C = SC/PC F = FC/PC E = E2000 S = ST 4 x PG 21 (Ø 9 18 mm) 4 x PG 16 blind wall mounting kit The number and type of splice trays (heatshrink or ANT splice protector), adaptors and pigtails have to be ordered separately. Application example

113 Termination Boxes 113 Connection Set for TBP 06 / 07 / 17 Used to connect a termination box sized TBP 06, 07 or 17 with tube management (e.g. Street Cabinet 01). TBAC 00D Connection Set 1 x PG 16 tube gland Ø 20 mm tube 24 x Ø 3 mm micro tubes Mounting Kit for Street Cabinet 01 The kit will be used for mounting the termination box TBP 06, 07 or 17 in a Street Cabinet size 01. Mounting Kit TBAC S1 00 for Street Cabinet 01 Mounting Kit for Street Cabinet 05 The kit will be used for mounting the termination box TBP 06, 07 or 17 in a Street Cabinet size 05. Mounting Kit TBAC S5 00 for Street Cabinet 05

114 114 Termination Boxes Installation Angle for TBP E3 For installation of terminal box TBP E3 in a Street Cabinet size 05. The box can thus be extended up to 18 cm from the Street Cabinet. TBAC E AN01 00 Installation Angle for TBP E3 Wall Mounting Kit for TBP A2 For wall mounting of termination box TBP A2. TBAC A W1 00 Wall Mounting Kit for TBP A2 Cable Store Mounting Kit for TBP A2 For mounting termination box TBP A2 on a cable store sizes 01 to 05. TBAC A S1 00 Cable Store Mounting Kit for TB A2

115 Termination Boxes 115 Splice Tray for TBP H1 Splice tray (heatshrink or crimp) for termination box TBP H1. Splice Tray TBAC H100 ST0H Heatshrink splice for TBP H1 TBAC H100 ST0A Crimp splice for TBP H1 Mounting Kit for TBP M2 For mounting a termination box TBP M2 in Street Cabinet 05. TBAC M S5 00 Mounting Kit for TBP M2 Splitter Module for TBP M2 For mounting splitters in termination box TBP M2. TBAC M200 SM Splitter Module for TBP M2

116 116 Cable Store Cable Store The Cable Store range is a hot-galvanised rod iron frame and is designed to store excess FO cable lengths. The winding diameter is compliant with the stipulated bend radius of commercial fiber optic cables. It is best used in cellars, shafts, lofts, transformer stations and wood, concrete and steel masts. Features The cable stores are prepared for direct installation of closures and termination boxes. Since the cable stores are stackable, several extra cable lengths can be stored in a space-saving and orderly fashion. The winding diameter of a fiber optic cable corresponds to approximately 40 times its diameter. n well-organised storage of extra lengths n stackable n for direct inclusion of closures and termination boxes n wall, mast and handhole fitting n suitable for in- and outdoor use

117 Cable Store 117 Application examples Cable store 2, stacked (3 pcs) Cable store 2 with cable Divided cable store 5 with cable (eight loop) Cable store 2 with closure CLS 01 Cable store 2 with termination box TBA 2

118 118 Cable Store Cable Store 1 Especially constructed for optical ground wire and duct cable crossings. Due to the integrated anchor bar, a FO duct can be fastened with clamps. Specifications winding diameter 800 mm dimensions 870 x 910 x 80 mm special versions on request CS WP0A01 00 Cable Store cable diameter max Cable Store 2 Designed especially for storage of excess fiber optic cable lengths. Specifications winding diameter 800 mm dimensions 870 x 870 x 80 mm special versions on request CS WP0A01 00 Cable Store cable diameter max

119 Cable Store 119 Cable Store 3 Designed especially for storage of excess fiber optic cable lengths with high tautness suitability. The excess length is not wrapped up but wound in. Specifications winding diameter 1040 mm dimensions 1250 x 1250 x 80 mm special versions on request CS WP0I01 00 Cable Store cable diameter max Cable Store 4 Designed especially for storage of excess fiber optic cable lengths with high tautness suitability. The excess length is not wrapped up but wound in. Also suitable for larger cable diameters. Specifications winding diameter 1350 mm dimensions 982 x 982 x 80 mm special versions on request CS WP0I01 00 Cable Store cable diameter max

120 120 Cable Store Cable Store 5 Designed especially for storage of excess fiber optic cable lengths. Because it can be divided, it can be installed in handholes and cable floors. The cable store halves can be installed separately. This allows substantially greater extra lengths and storage in a loop of eight (cable torsion compensation). Specifications winding diameter 800 mm dimensions 870 x 870 x 80 mm special versions on request CS WH0A11 00 Cable Store 5 cable diameter max ~ 870 ~ Cable Store M Especially constructed for mini cable over lenghs. Cable Store M enables wellorganised storage of up to 7 mini cables with 20 m excess length each. The integrated cable clamps allows the tubes to be mounted. Specifications dimensions 1105 x 535 x 75 mm special versions on request CS MC H00I01 BE Cable Store M

121 Cable Store 121 Cable Store Mounting Kit For mounting of a cable store on a concrete or wooden mast. CS AC P Cable Store Mounting Kit

122 122 Accessories Accessories

123 Accessories 123 Splice Tray SK2002 Brief description for max. 24 splices with splice protector: heatshrink Ø 2.5 or ANT stackable, tool-free hinging system dimensions 162 x 124 x 6 mm material: polypropylene, black ACST 24H ACST 24A Splice Tray SK pcs, for max. 24 pcs heatshrink splice protectors, 24 pcs cable ties 6 pcs, for max. 24 pcs ANT splice protectors, 24 pcs cable ties Cable Relief 01 for Pigtails Splice Tray Strength Member Kit Brief description used to secure the strength member in the pigtails directly on splice tray SK2002 only necessary for mounting more than 6 pigtails per entry ACST SRP pcs Splice Tray Cover SK2002 Brief description used to cover splice tray SK2002 to protect splices and fibers ACST STC pcs Cable Ties Brief description to secure tubes and pigtails on a splice tray dimensions 71 x 1.8 mm ACST CT pcs

124 124 Accessories Splice Protectors Brief description protects the splice against mechanical and environmental influences available in 45 mm or 60 mm or as ANT splice protection Heatshrink splice protector ACST SP pcs Length 45 mm Ø 2.5 mm ACST SP pcs Length 60 mm Ø 2.5 mm ACST SP00 ANT pcs ANT splice protector Tube Management Set 01 Brief description used to divide the fibers from the loose buffer tubes and to guide them protected into the splice trays Kit 01: 12 pcs fiber splitters protection tube length 7.5 m Ø 2 mm protection tube length 3.5 m Ø 3 mm protection tube length 1.5 m Ø 5 mm ACST SF Cable Clamps 01 Brief description with undetachably single cable protector to secure FO cables and tubes to profile rails for Ø 32 mm, 40 mm and 50 mm ACCC pcs for Ø 32 mm ACCC pcs for Ø 40 mm ACCC pcs für Ø 50 mm

125 Accessories 125 PG Glands Brief description used to guide the FO, breakout and patch cords into the different splice boxes cable pigtails can be guided using a special form PG glands available in plastic or metal models available in various diameters PG Glands Insert Cable glands ACPG PVCE pcs PG 13, plastic Ø 6 12 mm ACPG PVCE pcs PG 16, plastic Ø 6 13 mm ACPG PVCE pcs PG 16, plastic 6 x Ø 3 mm Ø mm ACPG PVCE pcs PG 21, plastic Ø 7 12 mm ACPG PVCE pcs PG 21, plastic Ø 9 18 mm ACPG PVCU pcs PG 16, plastic separable Tube glands Ø mm for uncut cable ACPG PVTS pcs PG 16, plastic Ø 20 mm tube ACPG PVTS pcs PG 16, plastic Ø 7 mm tube ACPG PVTS pcs PG 16, plastic Ø 9 mm tube Flexible Tubes Brief description high strength (crush-proof) used to protect FO cables or their loose buffer tubes with Ø 20 mm also available as split tubes, which provide protection of FO tubes after installation split variable tube gland available ACFT XX00 00 ACFT XX00 00 ACFT XX00 00 ACFT 2000 D000 XX00 00 ACFT XX00 00 ACFT XX00 00 ACFT XX00 00 ACFT XX00 00 ACFT XX00 00 Plastic tube Ø 10 mm Ø 13 mm Ø 20 mm Ø 20 mm, split Ø 29 mm Ø 32 mm Ø 36 mm Ø 40 mm Ø 50 mm XX = length

126 126 Accessories Location Marker Brief description passive elements, which are buried together with FO components with the corresponding location marker tool, the position can be identified quickly depending on the model, the marker works up to a laying depth of 1.8 m or 1.2 m Location Marker ACMA BL colour black for laying depths of up to 1.8 m ACMA GR colour green for laying depths of up to 1.2 m Velcro Roll Brief description used for securing cable pigtails and patch cords length per roll 4.5 m width of 8 mm or 20 mm, depending on version colours available: blue, yellow, green, grey, orange, red, black, white ACTA 0800 XX ACTA 2000 XX Velcro Roll width 8 mm, length 4.5 m width 20 mm, length 4.5 m XX colour: BL = blue, YE = yellow, GR = green, GY = grey, OR = orange, RD = red, BK = black, WH = white Blind Plugs Brief description used to close unused adaptor holes in the patch panels available for different connector types Blind Plugs ACBS FC pcs for FC, ST, ACBS SC pcs for SC, E2000 ACBS SCD pcs for SC-duplex

127 Accessories 127 C-Marker Brief description used for numbering the individual patch cords and cable pigtails consists of 90 markers per number in white or yellow C-Marker ACLS WH Numbers 0-9 white Ø 3 mm ACLS YE Numbers 0-9 yellow Ø 3 mm ACLS WHAZ Numbers A-Z white Ø 3 mm Desiccant Brief description absorbs the closed-in atmospheric humidity in boxes and closures ACDE AL Desiccant 2 pcs

128 128 Tools Tools

129 Tools 129 Fiber Microscope To view the connector surface 200-times magnified. TO FAMI TO FAMI Fiber Microscope E2000 top part as additional accessory Red Light Source Visible laser light source 650 nm to shine through fibers and for fiber identification. TOROLI Tube Cutter Turning tool with adjustable blades (for fiber tubes) up to 3.2 mm Ø. TOROSC Air Tube Cutter For 3 mm, 5 mm and 10 mm diameter tubes. TOROSC Cablefix Cable Jacket Cutter Slits cables in a round, spiral or lengthways, self-turning blade. TOKAFI TOKAFI Cablefix Cable Jacket Cutter Replacement blade for Cablefix

130 130 Tools Kevlar Scissors Strongly cogged version with shock-resistant plastic handles. Length: 145 mm. TOKESC AM25 Cable Jacket Cutter For round cables with diameter 4.5 to 25.0 mm. TOAM TOAM AM25 Cable Jacket Cutter replacement blade for AM25 Lever System Wire Cutter Double joint construction with return spring enables easy cutting of extremely strong wires without exerting high handle pressure. The handles are coated with PVC. TOHESE Separation Instrument for Fibers Suitable for precise separation of all common single optics fibers with a diameter of 125 µm. Simple and quick separation process: Squeeze fiber stretch scratch break with only one press. The durable (approx. 10,000 separations) diamond dividing disc ensures the high quality division of cables. Low susceptibility to interference and dirt; easy to clean. TOTRGE TOTRGE Separation Instrument Replacement Diamond

131 Tools 131 Clauss Fiber Optic Cable Stripper For stripping fibers with Ø µm and cable sheath. Ø 3 mm, comfortable handles, lockable. Length: 165 mm TOSTCL Miller Fiber Optic Cable Stripper For stripping of fibers with Ø 250 µm. Length: 165 mm TOSTMI way Fiber Optic Cable Stripper For stripping fibers with Ø 3.0 / 0.9 / 0.25 mm. TOST3A

132 132 Tools MCS Tube Cutter Tube cutter for MCS cables available in two sizes. TOMKRO TOMKRO Tube Cutter MKS, Ø 6 35 mm MKS, Ø mm Fiber Optic Tube Cutter (lengthways) For all fiber optic tubes of different thickness. Function is similar to a tin opener: the blade is pulled through the tube by means of a lever movement. TOLWLR TOLWLR Fiber Optic Tube Cutter (lengthways) EM-AMX Replacement double blade Fiber Optic Tube Cutter (Crossway Cutter) Tube cutter for diameters from 6 mm to 67 mm with intro burr and replacement cutter wheel. TOLWLR TOLWLR Fiber Optic Tube Cutter (Crossway Cutter) Replacement Cutter Wheel Mini Tube Cutter Mini tube cutter for tube diameters up to 22 mm. TOMIAB

133 Tools 133 Cleaning Kit The kit includes cleaning towels, cleaning swabs and cleaning agent for cleaning FO connectors and adaptors. TORESE Cable Cleaning Towels For cleaning FO cables and loose tubes. ACKRT tin containing 30 tissues Pre-Fiber 500 m or 250 m in portable suitcase. Dimensions: 225 x 200 x 70 mm Other lengths, connector or cable types available on request. PPFC XX X X VF X X XXXX 00 Number of fibers 01 1 fiber 02 2 fibers Length m m Type of connector at both ends 0 not applicable Cable type 0 singlemode 9/125 G652 F C E S FC SC E2000 ST 1 singlemode 9/125 G652d 2 multimode 50/125 OM2 3 multimode 50/125 OM3 4 multimode 62.5/125

134 134 Assembly & Service Assembly & Service Our customers benefit from LEONI NBG Fiber Optics unique all-in support, which begins in the acceptance and definition phase of each project. A project management team provides the customer with feasibility and design studies on the architecture, the business model and execution phase of the network. Based on these planning results, the customer has a list of components and installation steps required, which form the basis for selection of suppliers as well as RFI Request for Information and RFQ Request for Quotation. Our services n all-in support n laying of cables and splicing work n assembly in- and outside Germany (new installation and repairs) n assembly of all types of connectors n in the event of network outages, we analyse the fault and devise easy and economical solutions on site During the planning and execution phases, which represent the next steps of a projects, a project and construction management team as well as the highly experienced installation teams will provide the support. They offer the customer services such as project and construction management, monitoring of the infrastructure installation such laying and connecting empty tube systems, blowing in of the fiber optic cables and fiber units, splicing of the fibers, installation of the ODF (Optical Distribution Frame), the connecting, branching off, division and customer connection boxes, commissioning of the active equipment as well as measuring and documenting the fiber optic network route, which can be built according to the customer s specific requirements. This one-stop shopping systems solution provides customers with the best option, thanks to which projects are supported and realised not only Just in Time (JiT) and Just in Place (JiP), but are also subjected to efficient risk management.

135 Assembly & Service 135 Rapid help on site Our assembly teams operate all over the world and have successfully completed a large number of contracts. This collaboration provides decisive benefits for both sides, i.e. our customers and LEONI. With our extensive know-how, we are able to provide you with rapid and direct assistance. Moreover, we are able to address your specific requests and suggest solutions for them. Conversely, we take on board your comments and suggestions on how to improve our products and implement them rapidly. Our team consists of trained technicians working for you with 3-axle splicing equipment, singlemode and multimode OTDRs, gauging systems and specially equipped assembly vans.

136 136 The Quality Connection Product overview Product name Page Pigtails Patchcords Adaptors 6 SM connectors 7 MM connectors µm semi-tight glass fibers 7 Simplex fiber optic cord 8 Duplex fiber optic cable 8 Breakout Cable 9 Pre-connected fiber units 9 FC/PC Connector 10 FC/APC Connector 10 ST Connector 10 SC Connector 11 SC/APC Connector 11 E2000 Connector 11 E2000 Connector 12 LC Connector 12 Order Code 13 FC Adaptor Square Flange Type 14 FC Adaptor D-Hole Type 14 FC/APC Adaptor Square Flange Type 14 ST Adaptor D-Hole Type 15 SC Adaptor Square Flange Type 15 SC/APC Adaptor Square Flange Type 15 SC/PC Duplex Adaptor Square Flange Type 16 E2000 Adaptor 16 E2000APC Adaptor 16 E2000APC Adaptor Snap in Type 17 LC Duplex Adaptor Square Flange Type 17 Couplers WDM Attenuators 18 Fiber optic couplers 19 Wavelength Division Mulitplexer (WDM) Attenuators 21 Modular Cable System 22 Modular Cable MC DI Direct Install 23 Modular Cable MC DB Direct Buried 24 Modular Cable MC DBR Direct Buried Reinforced Modular Cable MC LFH Low Fire Hazard 26 Duct (DU) 27 Single Tube (ST) Duct connector 28 Reduction duct connector 28 Bored duct connector 28 Bored reduction duct connector 28 Duct repair kit Duct repair kit Duct plug 29 Straight tube connector 30 Reduction duct connector 30 Gas block tube connector 30 End tube connectors 30 Clip 30 Closedown connector 31 Sealing element 31 Y connector 31 Modular cable entry kit Modular cable entry kit Handhole L 32 Handhole L 33 Additional frame elements for Handhole L without entries Frame element with entries 34 Height compensation kit for Handhole L Cover lifter for Handhole L 34 Plug Ø 110 mm 35 Plugs 35 Duct adaptor Ø 110 mm 35 Reducer Ø 50 mm 35 Plug Ø 30 mm 35 Frame connector 35 Plug Ø 51.5 mm 35 Street Cabinet 36 SC1 Street Cabinet SC1 Street Cabinet Plastic Base Tube Management Kit 41 Base 05 Mounting Plate 41 Fiber Optic Cable 42 FU Fiber Unit 43 Micro cable (MUC) LTMC loose tube mini cable 45 Loose tube cable (LTC) 46 Rack System A Shelves 48 Rack System 1HU Splice/Patch Shelf A 49 Rack System 2HU Splice/Patch Shelf A 50 Rack System 3HU Splice/Patch Shelf A 51 Rack System 3HU Management Shelf A 52 Rack System 1HU Cable Shelf A Rack System 2HU Cable Shelf A Instrument base plate 54 Blind front panels 54 Cable guidance panel 54 Feed-through front panel 54 Cable entry angle 54 Order Code Splice/Patch Shelf Rack System 1 56 Rack System 1 Single rack 58 Rack System 1 Addable rack 59 Rack System 1 Splice/Patch Shelf 1 60 Rack System 1 Module mounting shelf 61 Rack System 1 "Management Shelf 1" 62 Side panel, 2 pieces 63 Roof panel with patch cord management 63 Roof panel with cable entry 63 Cable management mounting kit 63 Rack System 1 Patch cord channel with bend controllers Rack System 1 Patch cord clamp 19" Rack System 1 Entry angel Rack System 1 Radius control 64 Rack System 1 Blind module for module mounting shelf Order Code Rack System 1 Splice/Patch Shelf Rack System 3 66 Base rack Rack System 3 67 Splice/Patch Shelf 3 with swivel module

137 The Quality Connection 137 Splice/Patch Shelf 3 without swivel module 68 Side panel, 2 pieces 69 Roof panel wih patch cord management 69 Roof panel with cable entry 69 Cable management mounting kit 69 Patch cord management set 69 Blind front panels 70 Cable guidance panel 70 Feed-through front panel 70 Order Code Splice/Patch Shelf Closures 72 CLS 01 Splice Management CLS 03 Splice Management CLS 04 Splice Management CLS 06 Splice Management CLS 07 Splice Management CLT 07 Tube Management CLP 08 Splice/Patch Management CLT 45 Tube Management 45 or CLT 45 Tube/Splice Management 45 CLT 52 Tube Management CLT 53 Tube Management 53 or CLU 53 Tube/Splice Management 53 CLT 63 Tube Management Closure MC Tubular Heatshrink Wrap-around and heatshrink closure Closure MC Wrap-around Heatshrink Basic Mounting Kit 82 Handhole Mounting Kit 82 Pole Mounting Kit 82 Street Cabinet Mounting Kit 82 External Strain Relief Kit 82 Cable Entry Set 83 4-Way Port Kit 83 Tube/Splice Connection Set 83 Cable Clamps DBU 09 Tube/Splice Management Tube Gland Kit 91 Cable Clamp Kit 91 PG Gland Kit 91 Termination Boxes 92 TBP 02 Splice/Patch Management TBP K2 Splice/Patch Management K2 94 TBP H1 Splice/Patch Management H1 95 TBT HA Tube Management HA or TBT HU Tube Management HU TBP 06 Splice/Patch Management TBS 06 Splice Management TBP 07 Splice/Patch Management TBS 07 Splice Management TBP 16 Splice/Patch Management TBP 17 Splice/Patch Management TBP EO Splice/Patch Management E1 103 TBP EO Splice/Patch Management E1 104 TBP E2 Splice/Patch Management E2 105 TBP E3 Splice/Patch Management E3 106 TBP E7 Patch-Management E7 107 TBP P6 Splice/Patch Management P6 108 TBP P7 Splice/Patch Management P7 109 TBP P8 Splice/Patch Management P8 110 TBP A2 Splice/Patch Management A2 111 TBP M2 Splice/Patch Management M2 112 Connection Set for TBP 06 / 07 / Mounting Kit for Street Cabinet Mounting Kit for Street Cabinet Installation Angle for TBP E3 114 Wall Mounting Kit for TBP A2 114 Cable Store Mounting Kit for TBP A2 114 Splice Tray for TBP H1 115 Mounting Kit for TBP M2 115 Splitter Module for TBP M2 115 Cable Store Accessories 122 Splice Tray SK Cable Relief 01 for Pigtails Splice Tray Strength Member Kit 123 Splice Tray Cover SK Cable ties 123 Splice Protectors 124 Tube Management Set Cable Clamps PG Glands 125 Flexible Tubes 125 Location Marker 126 Velcro Roll 126 Blind Plugs 126 C-Marker 127 Desiccant 127 Tools 128 Fiber Microscope 129 Red Light Source 129 Tube Cutter 129 Air Tube Cutter 129 Cablefix Cable Jacket Cutter 129 Kevlar Scissors 130 AM25 Cable Jacket Cutter 130 Lever System Wire Cutter 130 Separation Instrument for Fibers 130 Clauss Fiber Optic Cable Stripper 131 Miller Fiber Optic Cable Stripper way Fiber Optic Cable Stripper 131 MCS Tube Cutter 132 Fiber Optic Tube Cutter (lengthways) 132 Fiber Optic Tube Cutter (Crossway Cutter) 132 Mini Tube Cutter 132 Cleaning Kit 133 Cable Cleaning Towels 133 Pre-Fiber 133 Distribution Boxes 84 DBT 01 Tube Management DBT 02 Tube Management DBT 05 Tube Management DBT 06 Tube Management DBU 08 Tube Management Cable Store Cable Store Cable Store Cable Store Cable Store Cable Store M 120 Cable Store Mounting Kit 121 Assembly & Service 134 Rapid help on site 135

138 138 The Quality Connection The latest from LEONI Our regularly updated information services such as the LEONI newsletter keep you abreast of recent developments at LEONI and on the market. So that we can tailor our choice of topics even more closely to your requirements and interests, we would be delighted to receive your suggestions and comments. What is more, we will always do our best to fulfil any requests for information you may have. If you want to be kept abreast of developments, simply request our LEONI newsletter by sending an to Furthermore, a visit to our website will always be worthwhile: Issue: September 2008 Technical changes, printing and other errors excepted. Please note: LEONI guarantees that the goods for sale in this catalogue have the agreed specifications at the time the risk is passed on. These specifications are determined exclusively by the specific written agreement concluded between LEONI and the ordering party with regard to the properties, features and performance characteristics of the article for sale. All illustrations and information provided in catalogues, price lists and any other information that has been put at the disposal of the ordering party by LEONI together with all product descriptions are legally binding only if they have been expressly described as such. Under no circumstances is such information to be construed as guarantee of a particular specification of the article for sale. Any such warranted properties must be expressly agreed on in writing. LEONI reserves the right to change the catalogue contents without notice.