PD-Series General Specifications

Size: px

Start display at page:

Download "PD-Series General Specifications"

Amice Fitzgerald
5 years ago
Views:

PD-Series General Specifications SmartGuard is an equipment ground fault protection device that combines hydraulic/magnetic circuit breaker and overload and short circuit protection and ground fault

1 PD-Series General Specifications SmartGuard is an equipment ground fault protection device that combines hydraulic/magnetic circuit breaker and overload and short circuit protection and ground fault protection. This breaker senses and guards against faults to ground using a state of the art integrated circuit. This technology detects faults and when a fault occurs, the breaker trips and an LED illuminates. The LED gives a clear indication that the trip occurred as a result of leakage. This protection helps prevent serious equipment damage and fire. Agency Certifications UL Recognized UL Standard 1077 UL Standard 943 Component Recognition Program as Equipment Leakage Circuit nterrupter and, Protectors, Supplementary (FTTJ2, File E177510). Tested as Ground Fault Circuit nterrupters for Equipment Protection. CSA Certified TUV Certified Component Equipment Leakage Current nterrupter with Supplementary Protector, under Class C22.2,No. 144-M91, Fle LR EC and appendix B: Circuit Breakers incorporating Residual Current Protection. Complies with waveform requirements of EC , Type A. Electrical Table A: Lists UL Recognized & CSA Certified configurations and performance capabilities as a Component Supplementary Protector. PD-SERES TABLE A: COMPENT SUPPLEMENTARY PROTECTOR & CURRENT NTERRUPTER NTERRUPTNG LEAKAGE VOLTAGE CURRENT RATNG CAPACTY (AMPS) CURRENT FULL GENERAL UL / CSA MUST - CRCUT MAX PURPOSE WTHOUT RATNG CFGURAT RATNG FREQUENCY PHASE AMPS AMPS BACKUP FUSE (MLLAMPS) 120/208 50/ SERES 120/208 50/ / Y 50/ Table B: Lists TUV Certified configurations and performance capabilities as a Circuit breaker incorporating residual current protection. PD-SERES TABLE B: CRCUT BREAKER WTH RESDUAL CURRENT PROTECT CURRENT LEAKAGE VOLTAGE NTERRUPTNG CAPACTY (AMPS) RATNG CURRENT FULL MUST - ULTMATE S/C SERVCE S/C RESDUAL S/C CRCUT MAX RATNG BREAKNG BREAKNG MAKE/BREAK CFGURAT RATNG FREQUENCY PHASE AMPS (MLLAMPS) CAPACTY (lcu) CAPACTY (lcs) CURRENT (l m) / mA SERES / mA /60 3 -Y mA / mA

2 PD-Series Equipment Leakage General Specifications Electrical Mechanical Maximum Voltage AC, 480 WYE/277 VAC, 50/60 Hz Standard Current Ratings 1.00, 2.50, 5.00, 7.50, 10.0, 15.0, 20.0, 25.0, 30.0, 35.0, 40.0 & 50.0 amps. For other ratings, consult factory. nsulation Resistance Minimum of VDC. Dielectric Strength 1960 VAC, 60 Hz for one minute between all electrically isolated terminals. Resistance, mpedance from Line to Load Terminal (Values Based on Series Trip Circuit O H M S AMPERE RATNG Leakage To Ground 100 CURRENT TOLERANCE (AMPS) (%) ± 15% ± 25% ± 35% Endurance Trip Free Physical 10,000 -OFF 6 per minute; with rated current and voltage. All SmartGuard equipment leakeage circuit breakers will trip on overload or leakage to ground, even when actuator is forcibly held in the Number of Poles 2, 3 & 4 Length (included switched or unswitched neutral) 4.2 inches ( mm) Width 2-pole: 3.0 inches (76.2 mm) 3-pole: 3.75 inches (95.3 mm) 4-pole: 4.5 inches (114.3 mm) Depth 2.5inches (63.5mm). Weight: 2-pole 16.0 oz. (453.6 gm) 3-pole: 21.4 oz. (606.7 gm) 4-pole: 26.9 oz. (762.6 gm) Standard Colors Housing - gray; - black, red, or white Mounting Front Panel or Standard 35mm Symmetrical DN Rail (35 x 7.5 or 35 x 15mm per DN EN5002). Termination Box Lug Standard Must Trip Leakage Current Ratings 7, 10, 15, 30, 50 & 100 milliamps. For other ratings, consult factory. Trip Time 300 ms 100%, 40ms 500% of must trip leakage current. Test Button On breaker face above actuator. Leakage Trip ndicator Red LED on breaker face above Environmental Operating Temperature +10 C to +50 C 102

3 PD 1 Series PD-Series Equipment Leakage Ordering Scheme R B B 1 A 1 2 Voltage/ Poles 3 Circuit 4 Frequency & Delay 5 Current Rating 6 7 Equipment Terminal Leakage - Trip Current 8 9 Color 1 C 10 Mounting 11 Agency Approval 1 SERES PD 2 SYSTEM VOLTAGE/S 1 System Voltage Poles A 120VAC 1Ø One plus unswitched neutral B 120/240 VAC 1Ø Two C 120/208 VAC 1Ø, Two plus unswitched neutral 120/240 VAC 1Ø D 120/208 VAC 1Ø, Two plus switched neutral 120/240 VAC 1Ø E 208/240 VAC 3Ø Three F 208/240 VAC 3Ø Three plus unswitched neutral G 208/240 VAC 3Ø Three plus switched neutral P 480Y VAC 3Ø Three Q 480Y VAC 3Ø Three plus unswitched neutral R 480Y VAC 3Ø Three plus switched neutral 6 EQUPMENT LEAKAGE - CURRENT (milliamps) 2 B 7 D 15 F 50 C 10 E 30 G TERMNAL 1 Front Connected Box Lug with Pressure Plate 8 ACTUATOR A Handle B Handle. with handleguard 9 ACTUATOR COLOR & LEGEND 4 Color Marking: Marking Color: Color: -O -OFF Dual White A B 1 Black Black C D 2 White Red E F 3 White 3 CRCUT B Series Trip (Current) 4 FREQUENCY & DELAY 20 50/60Hz nstantaneous 22 50/60Hz Short 5 CURRENT RATNG (AMPERES) /60Hz Medium 26 50/60Hz Long MOUNTNG 3 1 Threaded nsert 6-32 x inches 2 Threaded nsert SO M3 x 6.5 mm 11 AGENCY APPROVAL C UL Recognized & CSACertified U TUV Certified 1 Units with a switched or unswitched neutral connection are the same size as a unit with an additional breaker pole (e.g. a 2-pole unit with a switched or unswitched neutral is the same physical size as a 3-pole unit.) Switched neutral poles contain the same overcurrent protection as the other poles. 2 The leakage currents shown will cause the breaker to trip (must-trip current). The musthold current is 67% of the must-trip current. 3 All breakers are front panel mountable using screw size shown. Breakers may also be mounted on either 35mm x 7.5mm or 35mm x 15mm symmetrical DN rail. 4 TUV certifed units must have -O or Dual legends. 103

4 PD-Series Circuit & Terminal Diagrams CRCUT SCHEMATCS 1- CRCUT PDA 3- CRCUTS PDE & PDP PED DUE TO P1(L) PED DUE TO 2- CRCUTS PDB P2(L) P1 PDF & PDQ (WTH UNSWTCHED NEUTRAL) PED DUE TO PED DUE TO PDC (WTH UNSWTCHED NEUTRAL) PDG & PDR (WTH SWTCHED NEUTRAL) PED DUE TO PED DUE TO PDD (WTH SWTCHED NEUTRAL) PED DUE TO DENTFCAT SCHEME.920 [23.37] 1(L1) 2(L2) 3(L3) [38.10] [114.30] OFF O BOX TYPE WRE CNECTORS WTH PRESSURE PLATE 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.015 [.38] unless otherwise specified. 104

5 PD-Series Form & Fit Drawings [63.50] [57.40] 6-32 [M3] THREAD x.195 [4.95] DEEP (2 PLACES PER ).265 [6.73].650 [16.51] [106.68] [106.68] PDA & PDB [88.90] [35.69] [52.37] [76.20].790 [20.10] PED DUE TO EARTH LEAKAGE.375 [9.53].750 [19.05] PDC & PDD.644 [16.36] PDE &PDP BUTT [95.25].150 [3.81].550 [13.96] PDF, PDG PDQ & PDR [30.86] OPTAL HANDLE GUARD [114.30].649 [16.48] [38.35] STANDARD 35mm SYMMETRCAL DN RAL (35 x 7.5 OR 35 x 15mm PER DN EN50022) [57.40] [52.37] [28.58].156 DA [Ø3.96] 4 PLCS. PANEL CUT-OUT DETAL ASSEMBLY SCREW DRVER REMOVAL 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.010 [.25] unless otherwise specified. 105

Products :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers

Products :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers Hydraulic/Magnetic Circuit Breaker B-Series B-Series PDF elibrary The B-Series hydraulic/magnetic circuit breakers are compact and