i-kon II Electronic Blasting System Product Catalogue North America January, 2014

Transcription

1 i-kon II Electronic Blasting System Product Catalogue North America January, 2014

2 Contents i-kon TM System Hardware 3 i-kon Logger 3 i-kon Blaster i-kon Blaster 2400S 3 i-kon Surface Remote Blasting System (SURBS) 4 i-kon Blaster 2400R 4 i-kon Centralized Electronic Blasting System (CEBS) Remote Blast Box 5 i-kon CEBS Lock Box (LB) 6 i-kon TM Accessories 7 i-kon SHOTPlus -i Software 7 EBS XS880 SERIAL Converter, USB 2.0 TO RS232 7 i-kon II Field Connector MGP5 7 i-kon II CEBS Analogue Lockbox modem spare 7 i-kon Copy Cable 8 i-kon Synchronisation Cable 8 i-kon Download Cable 8 i-kon II Stethoscope Cable 8 i-kon Connection Cable Logger to Blaster 9 i-kon Banana plug to alligator clip test lead 9 i-kon Logger to Splice Cable 9 i-kon Spare RBB cable to phone modem heavy duty 9 i-kon Spare RBB cable to LAN modem 10 i-kon Logger/ i-kon Blaster 400 Charger 10 i-kon Blaster 2400S Charger Typ G 10 i-kon SURBS/B2400R Charger 10 i-kon CEBS RBB Charger 10 i-kon Vehicle Charger for Logger or Blaster EBS Protective Cable End CAP 11 EBS Sling Bag 11 i-kon Logger Nylon Carry Bag (Blue) 11 i-kon Blaster 400 Nylon Carry Bag (Red) 11 i-kon Logger Winter Pouch 12 EBS Carry Bag Straps 12 i-kon EBS CEBS RBB Binding Post Protector Kit 12 EBS Connector Dock 13 i-kon SURBB/Blaster 2400R Antenna 13 i-kon TNC Magnetic Mobile Antenna Base 13 i-kon SURBS Antenna Elbow 13 i-kon CEBS LF Antenna 14 i-kon CEBS LF Antenna 14 i-kon CEBS LF Antenna Magnetic Base 14 i-kon CEBS LF Cable 14 i-kon CEBS LF Cable 15 Dongle and Keys 15 i-kon SURBS Dongle (Black) 15 i-kon RBB Smart Dongle (White) 15 i-kon Lockbox Master Dongle (Green) 15 i-kon Blaster 400 Firing Key 15 i-kon Blaster 2400S Firing Key 16 i-kon Logger Beep Booster 16 i-kon Lockbox/Remote Blast Box Spare Key 16 EBS i-kon /OSEIS equipment binder cap 16 Training Aids 17 i-kon II Dummy Puck 17 i-kon II Product Catalogue North America 2

3 i-kon TM System Hardware i-kon Logger SAP Code: XREL A hand held logging and testing device capable of logging a maximum of 200 i-kon detonators per i-kon Logger. An inherently safe device used on bench to communicate and assign delay times and firing sequences to i-kon detonators. i-kon Logger unit includes: - i-kon Logger charger - i-kon Logger cable - Blue nylon carry bag i-kon Blaster 400 SAP Code: XB400E A hand held device able to provide the voltage and digital signal required to fire up to 400 i-kon detonators via two i-kon Loggers from a safe location. i-kon Blaster 400 unit includes: - i-kon Blaster 400 charger - i-kon Blaster 400 firing key - Red nylon carry bag i-kon Blaster 2400S SAP Code: XB2400S The Blaster 2400S is used to charge, program and control the firing of i-kon detonators. The Blaster 2400S can fire up to 2,400 detonators on 12 Loggers individually and 4,800 detonators when synchronised to another Blaster (2 x Blaster 2400S working together via a master slave system). Not capable of remote firing. i-kon Blaster 2400S unit includes: - i-kon 2400S firing key - i-kon Blaster 2400S charger i-kon II Product Catalogue North America 3

4 i-kon Surface Remote Blasting System (SURBS) SAP Code: XRESURBB (For Canada) XRESURBBUS (For USA) The first component of the i-kon Surface Remote Blasting System (SURBS) which allows the initiation of surface blasts from a safe line of sight location. Also pictured is the i-kon dongle, a feature to enable encrypted communications between i-kon blast control hardware, thus ensuring improved security. The SURBB provides the voltage and digital signal required to fire up to 2400 i-kon detonators via 12 Loggers. i-kon SURBB unit includes: - i-kon SURBS antenna - i-kon SURBS battery charger - i-kon SURBS antenna elbow - i-kon SURBS dongle (black) i-kon Blaster 2400R SAP Code: XREB2400R XREB2400RUS (For Canada) (For USA) The second of the i-kon SURBS components, the Blaster 2400R is the master firing unit used to remotely control the Surface Remote Blast Box (SURBB), capable of firing up to 2400 detonators. i-kon 2400R unit includes: - i-kon SURBS antenna - i-kon SURBS battery charger i-kon II Product Catalogue North America 4

5 i-kon Centralized Electronic Blasting System (CEBS) Remote Blast Box The CEBS consists of Remote Blast Box (RBB) and a Lock Box (LB) together with an i-kon Logger. The system utilizes the mine s existing communication infrastructure (analogue telephone, Leaky Feeder, or WLAN/LAN) to remotely initiate underground blasts from a safe firing point. The RBB provides the voltage and digital signal required to fire up to 2400 i-kon Detonators. i-kon CEBS can be used via: Analogue telephone, Leaky Feeder or LAN/WLAN. Analogue Telephone CEBS System LAN/WLAN CEBS System Analogue Telephone CEBS System SAP Code: XREDCBSR i-kon Remote Blast Box (RBB) unit includes: - i-kon RBB Key - i-kon RBB cable to phone modem - i-kon RBB battery charger - i-kon RBB smart dongle (white) LAN/WLAN CEBS System SAP Code: XREDCBSRLW i-kon Remote Blast Box (RBB) unit includes: - i-kon RBB Key - i-kon RBB cable to LAN modem - i-kon RBB battery charger - i-kon RBB smart dongle (white) - i-kon WLAN antenna Leaky Feeder CEBS System SAP Code: XREDCBSRLFUHFNA (UHF Modem) SAP Code: XREDCBSRLFNA (VHF Modem) i-kon Remote Blast Box (RBB) unit includes: - i-kon RBB Key - i-kon RBB LF Radio modem (internal) - i-kon RBB battery charger - i-kon RBB smart dongle (white) - i-kon Leaky feeder antenna (RBB has a binding post protect, not picture available) Leaky Feeder CEBS System i-kon II Product Catalogue North America 5

6 i-kon CEBS Lock Box (LB) Analogue Telephone CEBS Lock Box System LAN/WLAN CEBS Lock Box System Leaky Feeder CEBS Lock Box System The CEBS Lock Box integrates with a central blasting software package housed on the blast controller s computer to control the CEBS Remote Blast Box. Capability of firing up to 2400 detonators. Communication is via the mines existing communication system, either Analogue, Leaky Feeder or LAN/WLAN. Analogue Telephone CEBS Lock Box System SAP Code: XREDCBSL i-kon CEBS Lockbox unit includes: - i-kon Lock Box key - i-kon Lock Box modem - i-kon Lock Box telephone cable - i-kon Lock Box power cord - i-kon Lock Box communication cable - i-kon Lock Box master dongle (green) LAN/WLAN CEBS Lock Box System SAP Code: XREDCBSLLW i-kon CEBS Lockbox unit includes: - i-kon Lock Box key - i-kon Lock Box power cord - i-kon Lock Box communication cable - i-kon Lock Box master dongle (green) Leaky Feeder CEBS Lock Box System (UHF & VHF) SAP Code: XREDCBSLLFUHF (UHF Modem) SAP Code: XREDCBSLLF (VHF Modem) i-kon CEBS Lockbox unit includes: - i-kon Lock Box key - i-kon Lock Box modem - i-kon Lock Box power cord - i-kon Lock Box communication cable - i-kon Lock Box master dongle (green) CEBS Head End Modem Leaky Feeder (UHF & VHF) SAP Code: XREDCBSHMLFUHFNA (UHF Modem) SAP Code: XREDCBSHMLFNA (VHF Modem)) Includes: - i-kon Head End modem (UHF & VHF) CEBS Head End Modem Leaky Feeder i-kon II Product Catalogue North America 6

7 i-kon TM Accessories i-kon SHOTPlus -i Software SAP Code: XISPLUSI Software link and Product key can be requested via to: SHOTPlus TM -i is a Windows compatible blast initiation sequence program designed exclusively for use with the i-kon Digital Energy Control System. SHOTPlus TM -i, SHOTPlus TM UG and SHOTPlus TM 5 (applications can be downloaded via the Blaster Desk Top) provides a simple and convenient way to design, analyse and optimise i-kon blasts. The highly visual interface makes the program easy to use and provides full Windows functionality. EBS XS880 SERIAL Converter, USB 2.0 TO RS232 SAP Code: XEBSUSB2RS232 Serial (RS232) to USB converter, compatible with: Windows 7 32/64, Vista 32/64 & XP32/64. i-kon II Field Connector MGP5 SAP Code: RICBL A single insulation displacement blue connector to carry signal from the i-kon II detonator to i-kon II duplex harness wire. i-kon II CEBS Analogue Lockbox modem spare SAP Code: XREDCBSM The Kit contains: Modem Cable (connected) i-kon II Product Catalogue North America 7

8 i-kon Copy Cable SAP Code: XCCB Cable is used to copy data contained on one i-kon Logger to another i-kon Logger. Used to set-up frequency synchronization between a Blaster 2400R and a Surface Remote Blasting Box. i-kon Synchronisation Cable SAP Code: XSYNCF Synchronisation cable is used to link two i-kon Blaster 2400S together to fire up to 4,800 i-kon detonators over 24 i-kon Loggers. i-kon Download Cable SAP Code: XDCA 3.25 feet (1 meters), Typ A XDCA6 6 feet (1.83 meters) Cables used for data transfer between the i-kon Logger and Orica SHOTPlus -i program, which downloads reports from i-kon Loggers and Blast Boxes to a computer. i-kon II Stethoscope Cable SAP Code: XSTETHCBLII Allows for quick connection between i-kon & i-kon II Logger and i- kon II harness wire for trouble shooting. i-kon II Product Catalogue North America 8

9 i-kon Connection Cable Logger to Blaster SAP Code: XCONCD Spare connection cable from logger to the blasting equipment. i-kon Banana plug to alligator clip test lead SAP Code: XEBSBPACTL i-kon Logger to Splice Cable SAP Code: XRELSCII i-kon Spare RBB cable to phone modem heavy duty SAP Code: XRBBXCBL i-kon Spare RBB Industrial Phone Cable (3') heavy duty short SAP Code: XRBBXCBLS i-kon II Product Catalogue North America 9

10 i-kon Spare RBB cable to LAN modem SAP Code: XREDCBSRLWCBL i-kon Logger/ i-kon Blaster 400 Charger SAP Code: XCHGRH Charger for i-kon Logger/ i-kon Blaster 400, output 12V DC/1.25A, input V AC. i-kon Blaster 2400S Charger Typ G SAP Code: XCHGRG Charger for i-kon Logger/ i-kon Blaster 2400S, output 12V DC/1.25A, input V AC. i-kon SURBS/B2400R Charger SAP Code: XCHGRSURBB i-kon SURBS charger can be used for SURBB and B2400R, output 15V DC/1.20A, input V AC. i-kon CEBS RBB Charger SAP Code: XCHGRRBB i-kon CEBS charger can be used for RBB, output 15V DC/1.20A, input V AC. i-kon II Product Catalogue North America 10

11 i-kon Vehicle Charger for Logger or Blaster 400 SAP Code: XVCHGR400 i-kon vehicle charger cable to charge i-kon Loggers and Blasters 400 EBS Protective Cable End CAP SAP Code: XEBSPCEC End Cap to protect binding connector for all EBS cables. EBS Sling Bag SAP Code: XREOBAGWP A specially designed Yellow Sling Bag with a side Pocket to assist deployment of the EBS system at the face or on bench. Designed to deploy a single reel of the draw-from-centre harness wire. Side pocket can be used to carry accessories, tools and/or equipment. i-kon Logger Nylon Carry Bag (Blue) SAP Code: XBAGLOG A specially designed carry bag with strap to assist keeping i-kon Logger dry and free from dust and grease. i-kon Blaster 400 Nylon Carry Bag (Red) SAP Code: XBAGB400 A specially designed carry bag with strap to assist keeping i-kon Blaster dry and free from dust and grease. i-kon II Product Catalogue North America 11

12 i-kon Logger Winter Pouch SAP Code: XRELWP A specially designed carry bag with a pocket to insert a heating pad to keep i-kon Logger warm when used in extremely cold conditions. EBS Carry Bag Straps SAP Code: XRESTRAP A spare strap to be used with: i-kon Logger, i-kon Blaster400, OSEIS Tester and shooter bags. i-kon EBS CEBS RBB Binding Post Protector Kit SAP Code: XRBBBPPK Bracket to protect the CEBS RBB binding post. i-kon II Product Catalogue North America 12

13 EBS Connector Dock SAP Code: XILOGIID The EBS Connector Dock is an i-kon accessory that can ONLY be used for i-kon II type connectors. It is a tool for logging the detonator without the need to open the connector (i-kon II connectors only). i-kon SURBB/Blaster 2400R Antenna SAP Code: XSURBSPRANT A spare antenna for i-kon SURBB and i-kon Blaster 2400R. i-kon TNC Magnetic Mobile Antenna Base SAP Code: XRTNCMMAB i-kon Magnetic Antenna Base & 12 (3.6m) cable note: this can be used with either the Blaster 2400R or with the SURBB. Note: antenna is ordered separately. i-kon SURBS Antenna Elbow SAP Code: XSURBSWST An antenna elbow to connect the i-kon SURBB antenna to the side of the blast box. i-kon II Product Catalogue North America 13

14 i-kon CEBS LF Antenna SAP Code: XLFVHFDPTX153 XLFVHFDPTX163 XLFVHFDPTX172 Tx153 Tx163 Tx172 Tx153 TX 153: Transmit frequency range MHz TX 163: Transmit frequency range MHz TX 172: Transmit frequency range MHz A dipole antenna used in the CEBS. Tx163 Tx172 i-kon CEBS LF Antenna SAP Code : XLFSMA A Meglab antenna used in the CEBS. Leaky Feeder Std Metal Antenna attaches to the Magnetic Base below. i-kon CEBS LF Antenna Magnetic Base SAP Code: XLFDPAMB A Meglab antenna Magnetic Base used in the CEBS. Leaky Feeder Antenna Magnetic Base comes with 10 (25.4cm) cable and male BNC connector. i-kon CEBS LF Cable SAP Code: XLFDPCA A Meglab Cable used in the CEBS. Leaky Feeder 5 (12.7cm) Cable with M/M BNC Connector. (From Head End Modem to Head End monitor cabinet) i-kon II Product Catalogue North America 14

15 i-kon CEBS LF Cable SAP Code: XLFDPC A Meglab Cable used in the CEBS. Leaky Feeder 34 (86.36cm) Cable with M/F connector. (From Lock Box Modem to Magnetic Antenna) Dongle and Keys i-kon SURBS Dongle (Black) SAP Code: XSURBS A component of the i-kon SURBS which allows the initiation of surface blasts from a safe line of sight location. Encrypted communications between i-kon blast control hardware, thus ensuring improved security. i-kon RBB Smart Dongle (White) SAP Code: XRBBSPRDGL A component of the i-kon CEBS which allows the initiation of underground blasts from a control location on the surface. A random 32 bit digital key code of the Remote Blast Box is written to the i- kon Smart Dongle every time the Remote Blast Box is restarted. i-kon Lockbox Master Dongle (Green) SAP Code: XCBSSMSTRD A component of the CEBS software package housed on the blast controller s computer to control the CEBS Remote Blast Box. Inserted into i-kon CEBS LockBox at blast time. i-kon Blaster 400 Firing Key SAP Code: XB400DONG Firing key required to activate communications and initiate the blasting sequence when using the Blaster 400. Note: a i-kon Blaster 400 key has a black cap i-kon II Product Catalogue North America 15

16 i-kon Blaster 2400S Firing Key SAP Code: XB2400SKEY Firing key that must be inserted into the i-kon Blaster 2400S to initiate the blasting sequence. It has a white plastic cap as pictured. i-kon Logger Beep Booster SAP Code: XBEEPP1 Amplifies the i-kon Logger s beep for logger confirmation. i-kon Lockbox/Remote Blast Box Spare Key SAP Code: XCEBSKEY Key that must be inserted into the i-kon Remote Blast Box ON/OFF switch and also inserted into the Lockbox Emergency Stop switch. Both are needed to activate communications and initiate the blasting sequence. A set is included for both RBB and Lockbox when purchased. The keys are interchangeable. EBS i-kon /OSEIS equipment binder cap SAP Code: XEBSIOEBC Binder cap to protect the binder Logger & Blaster400 connector. i-kon II Product Catalogue North America 16

17 Training Aids i-kon II Dummy Puck SAP Code: XPUCKDUMMYII (20cm) XPUCKIIHIGH (20cm with High leakage) XPUCKIILOW (20cm with Low leakage) Dummy i-kon II detonator series display used for training purposes. Please note that the images in this catalogue are not to scale. For further information on the full range of Orica s Electronic Blasting Systems please visit our website or contact your local Orica Representative. All information in this brochure is as accurate and up-to-date as possible at the time of publication. Since Orica Group Companies cannot anticipate or control the conditions under which this information and its products may be used, each user should review the information in the specific context of the intended application. The Orica Group Companies will not be responsible for damages of any nature resulting from the use or reliance upon the information. No express or implied warranties are given other than those implied mandatory by law. Orica Australia Pty Ltd The word Orica, the Ring Device and the Orica mark are trademarks of Orica Group Companies. edev, i-kon, and uni tronic are trademarks of Orica Explosives Technology Pty Ltd ACN , 1 Nicholson Street, East Melbourne, Victoria, Australia. i-kon II Product Catalogue North America 17