Distinctive Characteristics
|
|
- Charity Mosley
- 5 years ago
- Views:
Transcription
1 Distinctive Characteristics vailable in flat frame and bracketed PC mounting types. Over-center actuator block and plunger design gives crisp actuation with clear indication of circuit status; this design also diminishes sparking and increases operating life. Guide interlocked with actuator block prevents window locking and maintains correct plunger alignment to assure contact stability. ntijamming design protects contacts from damage due to excessive downward force on the actuator. High internal barriers between poles and insulating sheet between case and actuator block give added protection to contacts. Specially composed silver alloy contacts for power applications or gold contacts for logic level applications give high contact reliability. Prominent external insulating barriers increase insulation resistance and dielectric strength. Epoxy sealed terminals prevent entry of flux, solvents, and other contaminants. Clinching of frame to case well above base and terminals provides,00v dielectric strength. ctual Size Nihon Kaiheiki Phone Fax
2 General Specifications Electrical Capacity (Resistive Load) Power Level (code V C 0V C Logic Level (code G): 0.V 8V C/DC maximum (pplicable Range 0.m ~ 0mV ~ 8V) Logic/Power Level (code ): Combines W & G ratings Note: Find additional explanation of dual rating & operating range in Supplement section. Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Contact Timing: Total Travel: Materials & Finishes ctuator: Frame: Dust Cover: Case: Movable Contacts: Stationary Contacts: Terminals: Environmental Data Operating Temp Range: Humidity: Vibration: Shock: 0 milliohms maximum for silver; 0 milliohms maximum for gold,000 megohms 00V DC,000V C minimum between contacts for minute minimum;,00v C minimum between contacts & case for minute minimum 00,000 operations minimum,000 operations minimum for silver; 0,000 operations minimum for gold Nonshorting (break-before-make) On-None-On circuit.087 (.mm); all other circuits.8 (.mm) Glass fiber reinforced polyester Stainless steel for panel & PCB mount; phosphor bronze with tin plating for bracket mount Phosphor bronze with nickel plating Glass fiber reinforced diallyl phthalate resin (UL9V-0) Silver alloy (code W); copper with gold plating (code G); or silver alloy with gold plating (code ) Silver capped copper with silver plating (code W); copper with gold plating (code G); or silver alloy with gold plating (code ) Copper or brass with silver or gold plating 0 C through +8 C ( F through +8 F) 90 ~ 9% humidity for 9 0 C (0 F) 0 ~ Hz with peak-to-peak amplitude of.mm traversing the frequency range & returning in minute; right angled directions for hours 0G (90m/s ) acceleration (tested in right angled directions, with shocks in each direction) Processing Soldering: Cleaning: Wave Soldering recommended (PC Mount). See Profile in Supplement section. Manual Soldering: See Profile in Supplement section. These devices are not process sealed. Hand clean locally using alcohol based solution. Standards & Certifications Flammability Standards: UL9V-0 rated case UL Recognized: ll Single & Double Throw models recognized V C 0V C; UL File No. WOYR.E; add /U to end of part number to order UL mark on switch. C-UL Recognized: ll Single & Double Throw models recognized V C 0V C; R UL File No. WOYR8.E; add /C-UL to end of part number to order C-UL mark on switch. CS Certified: ll Double Throw & Throw models certified V 0V C, & 0.V 8V DC; CS File No ; add /C to end of part number to order CS mark on switch. Nihon Kaiheiki Phone Fax
3 TYPICL SWITCH ORDERING EXMPLE MS S G 0 POLES TERMINLS SPDT DPDT SPT CIRCUITS NE F N S MOUNTING Panel Mount (Terminal 0 only) PCB Mount (Terminal 0 only) Bracket Mount (Terminals, 0, & 0 only) 0 Solder Lug 0 Straight PC Straight with Bracket 0 Right ngle PC 0 Vertical PC OFF 0 CTCT MTERILS & RTINGS B CTUTORS (.8mm) Wide for Single or. (8.mm) Wide for W G Silver; V C 0V C Gold; Rated 0.V 8V C/DC max. Gold over Silver; V C & 0.V 8V C/DC max. IMPORTNT: Switches are supplied without UL, C-UL & CS markings unless specified. Specific models & ratings are noted on General Specifications page. DESCRIPTI FOR TYPICL ORDERING EXMPLE MSSG0 (.8mm) Wide ctuator SPDT -NE- Circuit Gold Contacts with 0.V Rating Right ngle PC Terminals with Support Bracket Nihon Kaiheiki Phone Fax
4 POLES & CIRCUITS Pole Model Slide Position Connected Terminals Throw & Schematics Left Center Right Left Center Right Note: Terminal numbers are not actually on the switch. SP MS MS NE OFF - OPEN - SPDT (COM) DP MS MS NE OFF - - OPEN - - DPDT (COM) For Throw (-On) Connected Terminals & Schematics Pole Model Left Center Right Connection The SPT model utilizes a double pole base. SP MS0 Connection Connection Connection (in) (in) (in) (out) (out) (out) (out) (out) (out) (out) (out) (out) connections must be made during field installation. Conn (out) (out) (out) Common (in) CTUTORS (.8mm) Wide for (.8mm) Wide for B. (8.mm) Wide for Only (8.). CTCT MTERILS & RTINGS W Silver over Silver Power V C 0V C G Gold over Brass or Copper Logic Level 0.V 8V C/DC maximum Gold over Silver Note: Complete explanation of operating range in Supplement section. Power Level or Logic V C or 0.V 8V C/DC maximum Note: This dual rated option is suitable when two or more identical switches are used in logic and in power circuits within the same application. See Supplement section for complete explanation of dual rating and operating range. Nihon Kaiheiki Phone Fax
5 MOUNTING TYPES & TERMINLS F Panel Mount (Combines with Solder Lug Terminal 0 only) Dimension =.8 (.8mm) for on-none-on.9 (8.mm) for on-off-on & on-on-on Maximum Panel Thickness:.97 (.0mm) (.) Dia Typ.09 (.9). (7.).90 SP or DP with (.8mm) ctuator (9.0). (.) Dia Typ.09 (7.).90 DP only with. (8.mm) ctuator N Straight PC Mount (Combines with Straight PC Terminal 0 only) S Support Bracket Mount (For Terminals, 0, & 0) Maximum Panel Thickness: For Straight PC with Bracket Terminal :.97 (.0mm) For ngle Mount Terminals 0 & 0:.77 (.mm) 0 Solder Lug 0 Straight PC Straight PC with Bracket Epoxy Seal (.0) (.).0 Thk = (0.8).0 (.0).7 (.0) Epoxy Seal (.).0.89 (.7).0 Thk = (0.8) Right ngle PC Vertical PC TYPICL SWITCH DIMENSIS Solder Lug Terminals (.) R Typ (7.).90 (9.).77 Sq (.) x (.0) Typ.0 x.0 (.7) (.).0 (.).0 (.).0 (0.).0 (.). (.) (.0) MSFW0 Solder Lug Terminals (.) R Typ (7.).90 (9.).77 (.) R Typ (7.).90 (9.).77 (.) x (.0) Typ.0 x.0 (.0) Typ (.7) (.).0 (.).0 (8.). (.).0 (0.).0 (7.).99 (.) (.).9.00 MSBFW0 Nihon Kaiheiki Phone Fax
6 TYPICL SWITCH DIMENSIS Straight PC Terminals (.).0 Sq (.).0 (.)..89 (.).0.0 (.7).00 (.7).0 (.8) Dia Typ.07 MSNG0 Straight PC Terminals.0 (.7) Typ.0 (.7).89 (8.). (.).0 (7.) (.).0.89 (.).9.00 (.8) Dia Typ.07 MSBNG0 Straight PC Terminals with Bracket.89.0 (.). (.) Typ (.) Typ.0.0 (.8). (.7) (7.9) Typ. (.).0 (.).0 (.7). (.). (0.).0 (7.) (.7).0 (.8) Dia Typ.07 (.) Dia Typ MSSG Straight PC Terminals with Bracket (8.) (.). (.) Typ (.) Typ.0 (.) Typ.09 (0.).09 (0.).09 (.).0 (.7). (.)..0 (0.).0 (.8). (.7) Typ.0.89 (.9).9 (.7).00 C L (7.9) Typ. (.8) Dia Typ.07 (.) Dia Typ MSBSG Nihon Kaiheiki Phone Fax
7 Right ngle PC Terminals TYPICL SWITCH DIMENSIS Sq (.).0 (.8) (.). (.7) (.).0 (.8) Dia Typ.07 (9.).7.0 (.).0 (.7). (.) (9.).7 (.7) (.) Typ.0 (.) Dia Typ MSSG0 Right ngle PC Terminals (8.). (.).0 (.). (.)..00 (.7) (.).9 (.8) Dia Typ.07 (.8) (.7).0 (.).0.0 (.).0 (.7). (.) (.7) (.7) Typ.00 (.8).0 (.) Dia Typ (.) Typ.0 MSBSG0 Vertical PC Terminals (.) Typ (.).7 Sq (.).0 (.).09 (0.).0 (0.).00 (.9).70.0 (.8) Typ (.7).0 (.).0 (.7) (.7) (.8) Dia Typ.07 (.8) Typ (0.).00 (.) Typ.7 (.) Dia Typ MSSG0 Vertical PC Terminals (8.). (.).0 (.9).70 (.).9 (.7).00 (.8) Dia Typ (.8) Typ (.) Typ (.).7 (.) Typ (.).7 (.).09 (0.).0 (.7).0 (.8) Typ (.7).0.89 (.7) Typ.00 (.7) (.) Typ.7 (.) Dia Typ MSBSG0 Nihon Kaiheiki Phone Fax
General Specifications
Miniature Rockers Slides Rotaries Programmable Illuminated P Pushbuttons eneral Specifications Electrical Capacity (Resistive Load) Power Level (silver): Logic Level (gold): Logic/Power Level (gold over
More informationGeneral Specifications
Series M00 Tipped Toggles Toggles Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers General Specifications Electrical Capacity
More informationGeneral Specifications
Series M00 Tipped Toggles Toggles Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers General Specifications Electrical Capacity
More informationGeneral Specifications
Series Process Sealed Subminiature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers General Specifications Electrical Capacity
More informationDistinctive Characteristics
Distinctive Characteristics Subminiature size (/ size of Series M switches) saves space on PC boards. Specifically developed for logic-level applications. Totally sealed body construction prevents contact
More informationGeneral Specifications
Series M2 Process Sealed Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks eneral Specifications Electrical
More informationGeneral Specifications
Series M Slides Rotaries Programmable Illuminated P Pushbuttons eneral Specifications Electrical Capacity (Resistive Load) Power Level (silver): A @ 5V AC or A @ 50V AC; 4A @ 0V DC (On-On circuit) & A
More information0.4VA Logic Level Straight, Right Angle & Vertical PC. Extended & Piano Actuated DIP Slides 24V DC Straight PC
Contents Slides AS Series... 0.VA Logic Level Straight, Right Angle & Vertical PC CS Series... 0 A Power Level Straight PC PCB Mount FS Series... igh Frequency 90Mz to Gz Straight PC JS0, JS0 Series...
More informationGeneral Specifications
Series M00 Tipped Rockers & Paddles Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks General Specifications Electrical
More informationDistinctive Characteristics
Distinctive Characteristics Top or side actuation permits flexible board design. Compact dimensions and low profile allow high density mounting and close stacking of PC boards. Crisp actuation positively
More informationGeneral Specifications
Series General Specifications Electrical Capacity (Resistive Load) Low/Logic Level: m @ V DC maximum for Standard Operating Force models m @ V DC maximum for igh Operating Force models Other Ratings Standard
More informationContents Rockers. A Series... B4 Process Sealed 0.4VA Logic Level Straight, Right Angle, & Vertical PC
Contents Rockers Toggles Rockers Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons A Series... 4 Process Sealed 0.4VA Logic Level Straight,
More informationGeneral Specifications
Series M Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks eneral Specifications Electrical Capacity
More informationDistinctive Characteristics
Distinctive Characteristics Low Profile Pushbuttons Series UB Bright, full face, or spot illumination with red, amber, or green single-element LEDs (an integral part of the switch), plus square or rectangular
More information6mm 3VA DC Power Level or 0.4VA Logic Level Straight PC PCB Mount. 6mm SMT 3VA DC Power Level & 0.4VA Logic Level Gull Wing Terminals Upright Mount
Contents Tactiles C Series... mm Process Sealed m Low/Logic Level PC Mount C Series...8 mm SMT Process Sealed m Low/Logic Level Gull Wing Terminals Upright Mount HP Series... mm V DC Power Level or.v Logic
More informationDistinctive Characteristics
Distinctive Characteristics Top or side actuation permits fl exible board design. Compact dimensions and low profile allow high density mounting and close stacking of PC boards. Crisp actuation positively
More informationStandard Size Rotaries Series HS TS PS
Standard Size Rotaries Series HS TS PS GENERAL SPECIFICATIONS Electrical Capacity Resistive Load: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical
More informationStandard Size Rotaries Series HS TS PS
Standard Size Rotaries Series HS TS PS GENERAL SPECIFICATIONS Electrical Capacity Resistive Load: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical
More informationGeneral Specifications
Series GT Process Sealed Ultra-Miniature SMT Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers General Specifications Electrical
More informationGeneral Specifications
Series SK General Specifications Electrical Capacity (Resistive Load) Power Level (silver): A @ 5V AC for low & medium security; A @ 50V AC for low security Other Ratings Contact Resistance: Insulation
More informationDistinctive Characteristics
Ultra-Miniature SMT Slides Series SS3 Distinctive Characteristics Compact dimensions and low profile allow high density mounting and close stacking of PC boards. Crisp actuation positively indicates circuit
More informationGeneral Specifications
Series CW Miniature Power Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks General Specifications CWS CWS CWT
More informationDistinctive Characteristics
Low Profile Process Sealed Tactiles Series J Distinctive Characteristics Special bracket for right angle mounting provides added design variations. igher operating force type provides more pronounced operating
More informationGeneral Specifications
Series BB Process Sealed Subminiature Antistatic Pushbuttons General Specifications Electrical apacity (Resistive Load) Logic Level: 0.VA maximum @ 8V A/D maximum (Applicable Range 0.mA ~ 0.A @ 0mV ~ 8V)
More informationGeneral Specifications
Slides Rotaries Programmable Illuminated P Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level: 5A @ 25/250V AC or 5A @ 30V DC Other Ratings Contact Resistance: 0 milliohms
More informationDistinctive Characteristics
Distinctive Characteristics Ultra-miniature size allows high density mounting, and extremely light weight of 0. gram makes these switches ideal for handheld equipment. Totally sealed body construction
More informationGeneral Specifications
Series F Ultra-Thin Process Sealed Tactiles General Specifications Electrical Capacity (Resistive Load) Low/Logic Level: m @ V DC Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength:
More informationDistinctive Characteristics
Distinctive Characteristics Industry s first molded rocker with TV rating. Designed to handle large inrush current. JWM models certified for TV-5 rating and JWL models for TV-8 rating. Special 5A @ 7V
More informationDistinctive Characteristics
Distinctive Characteristics Low Profile Pushbuttons Series UB Bright or super bright LEDs (an integral part of the switch) of red, amber, green, blue, or white, in full face or spot illumination plus square
More informationStandard Size Rotaries Series HS TS PS
Standard Size Rotaries Series HS TS PS GENERAL SPECIFICATIONS Electrical Capacity Resistive Load: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical
More informationCK Series...F3 16mm & 19mm High Security 3A Power Level Solder Lug Bushing Mount
Contents Keylocks Toggles A Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers CK Series... 6mm & 9mm High Security A Power Level
More informationGeneral Specifications
General Specifications Electrical apacity (Resistive Load) Low/Logic Level: m @ V D Other Ratings ontact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal
More informationGeneral Specifications
Miniature Rockers Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators eneral Specifications lectrical Capacity (Resistive Load) Power Level (silver): Logic Level (gold):
More informationDistinctive Characteristics
Distinctive Characteristics Full face, bright LED illumination in choice of red, green, and amber for visible status indication. 9-amp or 6-amp electrical capacity in compact body. Interior shield prevents
More informationGeneral Specifications
Ultra-Miniature Slides General Specifications Electrical Capacity (Resistive Load) ower Level (silver): 0.A @ 0V DC Logic Level (gold): 0.VA maximum @ 8V AC/DC maximum (Applicable Range 0.mA ~ 0.A @ 0mV
More informationGeneral Specifications
Series NP01 Subminiature Smooth ctuation Pushbuttons General Specifications Electrical Capacity (Resistive Load) Logic Level: 0.4V maximum @ 28V C/C maximum (pplicable Range 0.1m ~ 0.1 @ 20mV ~ 28V) Other
More informationTYPICAL SWITCH ORDERING EXAMPLE BARRIER TYPES. R No Barrier B With Barrier CAP COLORS. A Black B Ivory. Red. H Gray INSCRIPTION ORIENTATION
TYPICAL SWITC ORDERING EXAMPLE JW L R C A M L RATINGS TV5 Rated 0A @ 5/50V AC TV8 Rated 6A @ 5/50V AC ARRIER TYPES R No arrier With arrier OUSING COLORS A lack POLES SPST SPDT * DPST DPDT * DPST must have
More informationProcess Sealed Rotaries
New Product N-0 NR0 Series Process Sealed Rotaries Subminiature Rotaries with Positive, Distinctive Detent 07-07-7 Series NR0 Subminiature Process Sealed Rotaries General Specifications Electrical apacity
More informationGeneral Specifications
Half-Inch Diameter Process Sealed Rotaries Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles eneral Specifications Electrical
More informationGeneral Specifications
eries J0 & J0 Ultra-Miniature lide & Piano DIP General pecifications Electrical Capacity (Resistive Load) witching Rating: ma @ V DC Nonswitching Rating: 0.A @ 0V DC Other Ratings Contact Resistance: Insulation
More informationSwitches Unlimited Contact: Fax: GENERAL SPECIFICATIONS
Series HS TS PS 00--0 Fax: --0 Electrical Capacity Resistive Load: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Indexing: Contact Timing:
More informationGeneral Specifications
Series CW Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks General Specifications CWS CWS Electrical Capacity Power Level:
More informationMedium Capacity Standard Size Toggles Series S
GENERAL SPECIFICATIONS FOR S ~ S9 (Resistive & Inductive Load) Power Level: Shown in the following tables Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life:
More informationGeneral Specifications
Series NP01 Subminiature Smooth ctuation Pushbuttons General Specifications Electrical Capacity (Resistive Load) Logic Level: 0.4V maximum @ 28V C/C maximum (pplicable Range 0.1m ~ 0.1 @ 20mV ~ 28V) Other
More informationDistinctive Characteristics
istinctive haracteristics Low profile body of MRF model accommodates space limitations required for P mounting. For the MR and MRK bushing mount models, the range of behind panel body depths is. to. (.mm
More informationDistinctive Characteristics
Tilt Switch Series DS Distinctive Characteristics DSA Environmentally friendly, contains no mercury. High contact reliability due to sealed body. The switch is triggered when tilted beyond ±10 of the horizontal.
More informationGeneral Specifications
Series Illuminated Low Profile Process Sealed Tactiles Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles General Specifications
More informationGeneral Specifications
Series ND mm Process Sealed SMT DIP otaries eneral Specifications Electrical apacity (esistive Load) Switching ating: ma @ 5V D Nonswitching ating: ma @ 5V D Other atings ontact esistance: Insulation esistance:
More information日本轻触开关 jf- 带灯轻触开关 - 轻触开关规格贴片轻触开关英文说明书 pdf 防水轻触开关 x 无声轻触开关 x 带灯轻触开 Tactiles Contents S eries... mm Process Sealed m or m Low/Logic Level Straight or Ri
Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 日本轻触开关 jf- 带灯轻触开关 - 轻触开关规格贴片轻触开关英文说明书 pdf 防水轻触开关 x 无声轻触开关 x 带灯轻触开 Contents
More informationSeries 47A: Miniature Rocker and Paddle Switches
SERIES 7A Miniature and Paddle Switches FEATURES Save Space and Weight,, PDT and PDT Circuitry Choice of Actuators and Terminations UL Recoginized DIP Switches S In inches (and millimeters) SP SP SP SP
More informationSeries 47A: Miniature Rocker and Paddle
Series 47A: Miniature Rocker and Paddle SERIES 47A Miniature Rocker and Paddle Switches FEATURES Save Space and Weight,, PDT and 4PDT Circuitry Choice of Actuators and Terminations UL Recoginized S in
More informationGENERAL SPECIFICATIONS FOR S1 ~ S29
Medium Capacity Standard Size GENERL SPECIFICTIONS FOR S ~ S9 (Resistive & Inductive Load) Power Level: Shown in the following tables 800--087 Fax: 78-7-70 Other Ratings Contact Resistance: Insulation
More information8 Series Pushbutton Switches
8 Series Pushbutton Switches Features. Contacts Silver or gold-plated contacts.. Epoxy resin case UL94V-0 self-extinguishing epoxy. 3. Actuator style Over 30 actuator variations. 4. Insulation between
More informationRockers Contents M S eries... Snap-in Mount A Power Level & 0.VA Logic Level Solder Lug, Quick Connect, Straight PC, & Wirewrap M S eries... 7 rackete
Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons 日本 NKK 官网的英文船型开关说明书 Contents Rockers A S eries... Process Sealed 0.VA Logic Level Straight, Right Angle, & Vertical PC
More informationAZ420 MINIATURE GENERAL PURPOSE RELAY
MINIATURE GENERAL PURPOSE RELAY FEATURES Rugged construction for high reliability Life expectancy greater than 100 million operations DC coils to 11 V Power consumption as low as 2 mw per pole available
More informationD2VW. Sealed Miniature Basic Switch. Ordering Information Model Number Legend D2VW- -
Sealed Miniature Basic Switch Sealed Miniature Basic Switch Conforms to IP67 (Molded Lead Wire Type Only) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to water
More informationL Series Miniature Slide Switches
Features/Benefits Positive detent Enclosed housing Maintained and momentary functions PC and panel mounting RoHS compliant Typical Applications Communications equipment Lighting devices Models Available
More informationQuick-connect terminals (#110)
Sealed Subminiature Basic Switch D2SW-P Sealed Basic Switch with Simplified Construction, Mounting Compatible with SS and D2SW Series. Sealed to IEC IP67. Switch rating of 2 at 250 VC possible with a single-leaf
More informationOrdering Information. Snap Action Switch V. Model Number Legend V General Purpose Snap Action Switch. Snap Action Switch V 121
Snap ction Switch V General Purpose Snap ction Switch Industry standard design with switching currents of 10 to 21 Widely used for applications where long life expectancy and high reliability is required.
More informationPUSH BUTTON SWITCHES(Momentary)
PUSH BUTTON SWITCHES(Momentary) Series - 7 DESCRIPTION Integral Series7 Push Button Switches is a unique design wherein the operative portion is separate from the Switch Element.The Basic Switch Series
More informationELUM TM Series Right Angle Illuminated Latching Pushbutton
LED FREE COMPTIBLE OPTION ELUM TM Series Right ngle Illuminated Latching Features/Benefits SPDT (N.O. & N.C.) Low height above PCB Reliable self-cleaning contact Surface-mount or thru-hole PCB Standard
More informationSELECTOR SWITCH TYPE 01
DT SHEET SELECTOR SWITCH TYPE 0 MIN FETURES COMPCT, UP TO POSITIONS '000 switching cycles with up to Ncm switching torque Gold plated contacts: micron Robust metal bushing and shaft Operating temperature:
More information16 g SS-01GL-FD SS-01GL-F SS-01GL-FT 50 g SS-01GLD SS-01GLD1 SS-01GLD2 SS-01GL SS-01GLT Simulated roller lever
Snap Action Switch SS Subminiature Snap Action Switch Economical, subminiature snap action switch offers long service life (30 million operations minimum) All models are free from overtravel restrictions,
More informationActuator Terminal Model
Sealed Snap ction Switch D2VW Watertight Miniature Snap ction Switch High-quality watertight, high-precision miniature Snap ction switch. Switch Body meets IP67 requirements Use of epoxy resin assures
More informationCommercial MATE-N-LOK Connectors
MP Commercial MTE-N-LOK Connectors Product Facts Fully polarized nylon housings Easy cavity identification Locking devices are integral part of design. Connector halves will hold together under severe
More informationD2F. Ultra Subminiature Basic Switch with plenty of terminal variations. Model Number Legend. Ultra Subminiature Basic Switch
Ultra Subminiature Basic Switch with plenty of terminal variations Incorporating a snapping mechanism made with two highly precise split springs that ensures long durability. Using insertion molded terminals
More informationTerminals Solder terminals Quick-connect. PCB terminals terminals (#110) 3 A Pin plunger SS-3GP SS-3GPT SS-3GPD SS-3GPB
Subminiature Basic Switch SS-P SS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept Insert molded base and improved case-to-base seal provides enhanced resistance to
More informationSPECIFICATION FOR APPROVAL
PART NO.: XMG-9771-AE51131-246 Xmultiple MARKETING GROUP R&D GROUP QA GROUP ISSUED BY CHECKED BY QA INSPECTION Gino De Xu Long CUSTOMER: SAMPLE Q TY: CUSTOMER CUSTOMER APPROVAL: APPROVAL CONCESSIONARY
More informationSPECIFICATION FOR APPROVAL
PART NO.: XMV-9768-DD611A0-006 Xmultiple MARKETING GROUP R&D GROUP QA GROUP ISSUED BY CHECKED BY QA INSPECTION Gino De XuLong CUSTOMER: SAMPLE Q TY: CUSTOMER CUSTOMER APPROVAL: APPROVAL CONCESSIONARY REJECTED
More information8 Series. Toggle Switches. Introduction. Applications. Features of 8 Series Toggles
8 Series Toggle Switches Introduction The 8 Series Toggles is Copal Electronics' highreliability miniature switch product offering. This product line meets and exceeds all basic international switch standards.
More informationDUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability
BOARD/WIRE-TO-BOARD CONNECTORS DUBOX SHUNTS FEATURES & BENEFITS Dual-beam contacts for added reliability Slotted cutout in low profile housing simplifies electrical testing Side-by-side and end-to-end
More informationPin plunger D2JW-011 D2JW-011-MD. Short hinge lever D2JW-01K1A1 D2JW-01K1A1-MD. Hinge lever D2JW-01K11 D2JW-01K11-MD
Sealed Snap ction Switch DJW Immersion-Proof Subminiature Snap ction Switch Ultra-small and highly sealed Water-tight housing conforming to IEC IP67 Wide range of operating temperature from -40 to 85 C
More informationIntroduction to High Current Card Edge Connectors
Introduction to High Current Card Edge Connectors Product Facts Contacts on.100 [2.54] Centerlines Selective gold plating of contacts for high performance at low cost Flow solder applications Glass-filled
More informationMechanical data Number of Contacts 8 or 16. Card extraction force. Electrical data Insulation resistance Contact resistance max. Card detection switch
1136 ITT - CCM Catalog 11/20/00 12:27 PM Page 8 CCM01 MK I CCM01 MK I connectors have fixed contacts and a blade card detection switch (not sealed). These connectors are intended for applications where
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationTF2. Sealed. Miniature. SPST Maximum Current SPST, SPDT SPDT. 15 Amps. 10 Amps J-26 J-20 ZMS ZMB. Sealed. Standard Precision Poles/Throws SPDT SPDT
Product Selection Guide Series TF TFS TF2 TM LC LC LCS Switch Type Poles/Throws Miniature SPST, SPDT Sealed Miniature SPDT Sealed Miniature SPDT Miniature SPST, SPDT Subminiature Precision SPST, SPDT Subminiature
More informationMini-Universal MATE-N-LOK 2 Connectors
MP Mini-Universal MTE-N-LOK 2 Product Facts One molded piece, secondary locking plug and cap housing assemblies Three-point stabilization to provide better terminal position Fully polarized to provide
More informationXC5. DIN-style Twin-contact Connectors. Expanding the DIN Concept. Materials and Finish. Ratings and Characteristics
DIN-style Twin-contact Connectors Expanding the DIN Concept Mates with DIN connectors. Ideal for automated soldering because the Connectors sit on top of the board. Mounting dimensions of the DIN Style-1
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationMiniature Basic Switch
Miniature Basic Switch Reliable and Safe Basic Switch Self-cleaning contacts. Best-seller Switches with switching currents of 10 to 21 A. Can be used for shutting down current in doors. Widely used for
More informationElectrical Components Catalog Universal MATE-N-LOK Connector System
Introduction Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation
More informationConstruction. Mechanical data Number of Contacts 6, 8 or 16. Electrical data Insulation resistance Contact resistance max. Switch contact resistance
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 45 CCM04 MKII The CCM04 without card guidance is used where space is at a premium and the card guidance can be built around the connector (rather than provided
More informationIntroduction. The information pages provide standard data common to all D-subminiature connectors. These include:
Connectors Information Introduction The D-subminiature is one of the most popular styles of connectors in the I/O category. It is used in computer, telecom, datacom, medical, and test instrumentation applications
More informationSERIES FEATURE MAX RATING MECHANICAL LIFE APPROVALS CIRCUITRY. B1 Ultra Small 2A 100,000 N/A SPST, SPDT
SWITCH SELECTION GUIDE Basic Switches SERIES FEATURE MAX RATING MECHANICAL LIFE APPROVALS CIRCUITRY (Resistive) B1 Ultra Small 2A 100,000 N/A SPST, SPDT B1-5 Levers 2A 1,000,000 N/A SPST, SPDT B2 Subminiature
More information2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin)
NEW 2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin) DF59 Series Floating Structure in Three xial Directions (Board-to-Board Structure) X
More informationQUICKIE SHROUDED HEADERS LOW PROFILE
BOARD/WIRE-TO-BOARD CONNECTORS QUICKIE SHROUDED HEADERS LOW PROFILE FEATURES & BENEFITS Recessed pins assure proper alignment and eliminate damage during mating End windows for latching with IDC receptacle
More information1mm Pitch Double Rows Low Profile Wire-to-Board Connectors
mm Pitch Double Rows Low Profile Wire-to-Board Connectors DF series Features. Contact Pitch mm contact pitch allows reliable solder and cable termination.. Reliable electrical connection wipe Effective
More informationHIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM. US Patent # 6,299,492 B1 2. POWER, RIGHT ANGLE EARLY 3. POWER, RIGHT ANGLE EARLY
HIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM US Patent # 6,299,492 B1 The HOTMATE board to board interconnection system provides a unique method of transferring hot pluggable power requirements within
More informationD2SW-3L1HS D2SW-01L1HS
Sealed Snap Action Switch D2SW Watertight Miniature Snap Action Switch High-quality watertight miniature Snap Action switch. Switch Body meets IP67 (IEC 529) requirements Monoblock construction assures
More informationDistributed by: www.jameco.com -800-8-44 The content and copyrights of the attached material are the property of its owner. Pin and Socket Mini-Universal MTE-N-LOK Product Facts Compact, durable housings
More informationMULTI ROTARY SWITCH MR50
MAIN FEATURES 1 / 2 " SELECTOR SWITCH Dimensions Ø ½ (12.7 mm) Switching mode: Shorting or non-shorting 10, 12 and 16 selector switch positions Switching torque up to 6 Ncm Gold plated contacts Rugged
More informationPRODUCT SPECIFICATION CUSTOM CONFIGURABLE MODULAR POWER DOCK CONNECTOR SYSTEM
1.0 SCOPE This Product Specification covers the custom configurable modular printed circuit board (PCB) Dock Connector System with gold plating. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMBER(S)
More informationseries Subminiature snap-action switches
Rocker switches Product features Small, efficient snap-action switches up to 10 (1.) A 20 V AC or 10.1 A 12-20 V AC 1/4 HP Lateral approach from both directions possible due to mushroom-shaped actuator
More informationSERIES TL 3200 SWITCHES
TACT 3200 TACT SMT, LED - 4.5mm x 6.8mm 30,000 cycles 500mΩ 100MΩ min. 160 +75/-30 grams Operating Temperature: -25 C to 85 C 0.25mm +0.2/-0.1mm Dual LED, SMT Design Ultra miniature design (only 4.5mm
More informationModular FLATPAQ. provided, and Elcon will provide samples, typically within one week.
Modular FLATPAQ Modular FLATPAQ connectors provide custom solutions to hot pluggable AC and DC power needs in a board-to-board format. By using off-the-shelf modular components, power and signal modules,
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationThe con ectors serve low durability cycle applications
Power Connectors & Interconnection Systems Introduction to High Current Card Edge Connectors Product Facts Contacts on.100 [2.54] Centerlines Selective gold plating of contacts for high performance at
More informationSS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept
Subminiature Basic Switch SS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept One-piece terminal construction to keep out flux. A single leaf movable spring construction.
More informationPGA / BGA / PLCC SOCKETS
PGA / BGA / PLCC SOCKETS QUICK SELECTOR CHART PGA / BGA / PLCC PGA BGA PLCC GRID 2.54 mm INTERSTITIAL 1.27 mm 1.27 mm 1 mm SOCKETS Solder tail 156 161 165 SEE PAGE 173 Surface mount 156 161 165 166 169
More informationCENTIGRID SURFACE MOUNT COMMERCIAL RELAYS
CENTIGRID SURFACE MOUNT COMMERCIAL RELAYS DPDT SERIES S114 SERIES DESIGNATION RELAY TYPE S114 S114D S114DD DPDT basic relay DPDT relay with internal diode for coil transient suppression DPDT relay with
More information