Description. Model Number. Revision. Notes AC / DC PSU 25HK-AJ-120A200-DH
|
|
|
- Eustace Neal
- 5 years ago
- Views:
Transcription
1 Product Specification Document Description AC / DC PSU Model Number 25HK-AJ-120A200-DH Revision A1 Notes - N
2 CUSTOMER MODEL NO REV DATE A PART NO 25HK-AJ-120A200-DH REV DESCRIPTION HKSC (A1) 變更 :1. 白內盒左上角加印 :Label 1: P/N: 25HK-AJ-120A200-DH Label 2: RoHS (adding the printing on the box) 2. 銘板增加 CUL Mark (Add the CUL Mark on the label) REMARKS 何寶玲 SAFETY APPROVAL: ENGINEER APPROVAL: ELECTRICAL STRUCTURAL 張偉松 歐陽建瓊 胡鵬 Page QR- 1 of 工 9-26A
3 1. INTRODUCTION 2. INPUT REQUIREMENTS 3. OUTPUT REQUIREMENTS 4. EFFICIENCY 6.HOLD UP TIME 7.TURN ON TIME CONTENTS 8.TEMPERATURE COEFFICIENT 9. DIELECTRIC STRENGTH (Hi-Pot) TEST 10. INSULATION RESISTANCE 11. PROTECTION 12. ENVIRONMENTAL CONDITIONS 15. SAFETY 1 5. LINE REGULATION 13. EMI/ EMC 14. RELIABILITY AND QUALITY CONTROL 16. OVERALL DRAWING 17. PACKING 18. MARKING Page 2 of 9
4 1.0 INTRODUCTION This document specifies a switching power supply with a output of +12V, and electronic process. The switching power supply will provide power for technology equipments including electrical business equipment.the adaptor meets the requirement of lead free and RoHS. 2.0 INPUT REQUIREMENTS 2.1 Input Voltage Range: 100(-10%)VAC to 240(+10%)VAC 2.2 Input Frequency Range: 47 Hz to 63 Hz 2.3 Input In-rush Current: 2.4 Input Power Consumption at no-load : 0.3W Max 3.0 OUTPUT REQUIREMENTS 60A Max 2.5 Input Current: 0.8A Max 3.1 Output Voltage: 3.2 Output Regulation: 3.3 Output Load Range: +12V V 2.0A 3.4 Output Ripple & Noise: 200mV bandwidth with 10UF/50V capacitance and 104/50V ceramic capacitor. 4.0 EFFICIENCY: of 25/50/75/100% loads 115&230VAC input 5.0 LINE REGULATION: ±2% maximum 6.0 HOLD UP TIME: 10ms Min at 110VAC full load. 7.0 TURN UP TIME: 2S Max at 110VAC full load. Page 3 of 9
5 8.0 TEMPERATURE COEFFICIENT: 0.05%/ C 9.0 DIELECTRIC STRENGTH (Hi-Pot) TEST 9.1 Primary to Secondary :AC 3000 Vrms,4mA,1minute for type test, 2 second for production test INSULATION RESISTANCE Primary to secondary: 50M OHM to 500VDC PROTECTION 11.1 Input Protection The switching power supply has a 2 Amps current fuse to protect itself Output Protection Output Current: Overload conditions shall decrease the output voltage. Removal of an output overload shall provide automatic recovery for the output voltage Short Circuit Protection: Auto Recovery. Page 4 of 9
6 12.0 ENVIRONMENTAL CONDITIONS The switching power supply can withstand the following environmental conditions: 12.1 Storage Temperature:-20 ~ +70 Relative Humidity: 10% ~ 95% 12.2 Operation 13.0 EMI / EMC Temperature:0 C~40 C Relative Humidity: 10%~95% The switching power supply has approved by the following standards: FCC PART 15B AS/NZS 55022/55024 J55022(H22) (1)EN55022(EN EN ) (2)EN55024(IEC IEC IEC IEC IEC IEC ) 14.0 RELIABILITY AND QUALITY CONTROL 14.1 Burn-in 14.2 MTBF When the operation is compling with this specification, the switching power supply's MTBF will be 50,000 hours at 25 centigrade degrees SAFETY The burn-in test will be performed at least 2 hours at 40 centigrade degrees under full load condition. The switching power supply has approved by the following safety standards: UL nd Edition, CSA C22.2 NO , 2nd Edition EN60950: 2006+A11 BS EN :2006 AS/NZS :2003+A1+A2+A3 Page 5 of 9
7 16. OVERALL DRAWING UNIT: mm 30±1 46±1 80±1 Non-strengthen ribs 35-J 不加強筋 Safety Marking 鐵粉芯 ferrite core φ14.5*30.5 AWG18 ULSPT ±1 30.5±1 1800±30 strengthen ribs 加強筋 Fork/kink 音叉帶溝 Ø5.5±0.1 Ø2.1±0.1 30±10 12±0.5 Page 6 of 9
8 17. PACKING 17.1 Inner Box UNIT: mm BOX( Normal BOX Corrugated BOX) Length: 100 Width: 50 Height: 48 Label: 1 Label: 2 印刷于此 Label: HK-AJ-120A200-DH Label: 2 24 RoHS 6 6 Height Open Side Length Width Material:A 卡 400 磅 (0.53t)White NOTICE: Its probably different from the white box of the sample and the figure dimension. The white box is used to pack during product. Page 7 of 9
9 17. PACKING 17.2 Carton UNIT: mm MODEL: N.W.: G.W.: Q'TY: 100PCS 100V~120V 200V~240V 100V~240V 100V~120V 200V~240V 100V~240V (Transverse Plane) 260 Page 8 of 9
10 18. MARKING 200# CPC 合成紙 + 上光 NAME-PLATE:WHITE CHARACTERS BLACK BACKGROUND. LASER PRINTING ON THE PLASTIC CASING. UNIT: mm M M Y Y C month year made in China by Hon-kwang R I.T.E. POWER SUPPLY MODEL: HK-AJ-120A200-DH INPUT: V 50/60Hz 0.8A OUTPUT: 12V 0015/5060Ⅱ 2.0A P E S 入力 : 100V 50/60Hz 0.8A 53VA 出力 :12V 2.0A JET 輸入事業者 2 60YM E N136 SGS/ TUVRheinland Group BS EN LPS MADE IN CHINA MMYYC Page 9 of 9
1200±30 12±0.5 52±1 99±1. Description. Model Number. Revision. Notes AC / DC PSU 25HK-AB-050A400-D5-1 CUSTOMER APPROVED SIGNATURES
Product Specification Document Description AC / DC PSU Model Number 25HK-AB-050A400-D5-1 Revision A1 Notes - 99±1 52±1 1200±30 15±1 28±1 30±10 12±0.5 AWG#16 UL1185 CUSTOMER APPROVED SIGNATURES VENDOR APPROVED
鳳冠電機股份有限公司. Description. Model Number. Revision. Notes. Ext. PSU 25HK-AB-120A250-CP CUSTOMER APPROVED SIGNATURES VENDOR APPROVED SIGNATURES 田青松
A 46 Product Specification Document Description Ext. PSU Model Number 25HK-AB-120A250-CP Revision A1 Notes - CUSTOMER APPROVED SIGNATURES VENDOR APPROVED SIGNATURES 經理 工程師 繪圖員 2013.06.07 2013.06.07 2013.06.07
鳳冠電機股份有限公司. Description. Model Number. Revision. Notes. Ext. PSU 25HK-AB-240A125-CP-1 CUSTOMER APPROVED SIGNATURES VENDOR APPROVED SIGNATURES 田青松
Product Specification Document Description Ext. PSU Model Number 25HK-AB-240A125-CP-1 Revision A1 Notes - CUSTOMER APPROVED SIGNATURES VENDOR APPROVED SIGNATURES 經理 工程師 繪圖員 2013.06.07 2013.06.07 2013.06.07
Description. Model Number. Revision. Notes CUSTOMER APPROVED SIGNATURES VENDOR APPROVED SIGNATURES. Ext. PSU 25HK-AJ-090A266-DH
Product Specification Document Description Ext. PSU Model Number 25HK-AJ-090A266-DH Revision A2 Notes - CUSTOMER APPROVED SIGNATURES VENDOR APPROVED SIGNATURES 2014.03.01 2014.03.01 2014.03.01 DESCRIPTION
SPECIFICATION FOR APPROVAL
SPECIFICATION FOR APPROVAL CUSTOMER: DESCRIPTION: MODEL NO: PART NO: DESIGNED NO: 161216-1217 DATE: DEC.30th.2016 CUSTOMER APPROVED SIGNATURES VENDOR APPROVED SIGNATURES 經理 田青松 課長 歐陽建瓊 繪圖員 羅珍珍 SPECIFICATION
Description. Model Number. Revision. Notes. Ext. PSU 25HK-AB-050A400-CP CUSTOMER APPROVED SIGNATURES VENDOR APPROVED SIGNATURES 工程師 繪圖員
Product Specification Document Description Ext. PSU Model Number 25HK-AB-050A400-CP Revision A3 Notes - e a CUSTOMER APPROVED SIGNATURES VENDOR APPROVED SIGNATURES 經理 2013.06.13 田青松 工程師 2013.06.13 歐陽建瓊
SPECIFICATION Page 1 of 8 MODEL NO: S15AC CUSTOMER P/N: DESCRIPTION: SWITCHING ADAPTOR ISSUED DATE:
SPECIFICATION Page 1 of 8 MODEL NO: S15AC12012501 CUSTOMER P/N: 252833 DESCRIPTION: SWITCHING ADAPTOR ISSUED DATE: 2013.10.11 REVISION: 1-3 TABLE OF CONTENTS 1.0 INPUT REQUIREMENTS 2.0 OUTPUT REQUIREMENTS
PRODUCT SPECIFICATION File: EA-A0601HE-12 Model: SSA-0601HE-12 Date: Apr. 17, 2015
SWITCHING POWER SUPPLY Rev.: A0(+12V/5A) Page: 1 of 5 1.0 Introductions: 2 2.0 AC Input Characteristics: 2 2.1 Input Voltage Rating:. 2 2.2 Input Voltage Range: 2 2.3 Input Frequency: 2 2.4 AC Inrush current:
SPECIFICATION Page 1 of 8 MODEL NO: S08AA CUSTOMER P/N: DESCRIPTION: SWITCHING ADAPTOR ISSUED DATE:
SPECIFICATION Page 1 of 8 MODEL NO: S08AA05005001 CUSTOMER P/N: 252701 DESCRIPTION: SWITCHING ADAPTOR ISSUED DATE: 2011.11.15 REVISION: 1-3 TABLE OF CONTENTS 1.0 INPUT REQUIREMENTS 2.0 OUTPUT REQUIREMENTS
Specification For 90 Watts Adapter Power Supply Model No: ADB002 Customer ID: 000G Revision: 4.0
Specification For 90 Watts Adapter Power Supply Model No: ADB002 Customer ID: 000G Revision: 4.0 Prepared By: Terry Liou Approved By: Jacky Chi PAGE 1 E. C. List 1.0 Original 2.0 Modify 8.3 Weight 3.0
REVISION HISTORY REV DESCRIPTION SALES RFS DATE A INITIAL RELEASE MS /20/2011 B UPDATE LABEL: CHANGE CQC PSE NAME TO COGNEX K.K.
REVISION HISTORY REV DESCRIPTION SALES RFS DATE A INITIAL RELEASE MS 20784 4/20/2011 B UPDATE LABEL: CHANGE CQC PSE NAME TO COGNEX K.K. MS 4/27/2011 APPROVED HM HM Customer Approval of Specification: Please
PRODUCT SPECIFICATION File:SSA Model : SSA Rev:A2 Date: Nov. 29, 2010
Page: 1 of 4 1.0 Introductions: 2 2.0 Input Characteristics: 2 2.1 Input Voltage Rating:. 2 2.2 Input Voltage Range: 2 2.3 Input Frequency: 2 2.4 Inrush current: 2 2.5 Input current: 2 2.6 Leakage current:
KUANTECH (SHEN ZHEN) COMPANY LIMITED KSAFD W1UK
1 GENERAL... 2 1.1 Description... 2 2 INPUT REQUIREMENTS... 2 2.1 Input Conditions... 2 2.2 AC Inrush Current... 2 3 OUTPUT REQUIREMENTS... 2 4 MECHANICAL... 3 4.1 Enclosure And Layout... 3 4.2 Input and
ENGINEERING SPECIFICATION 90 WATT POWER SUPPLY PART NUMBER PA P1
ENGINEERING SPECIFICATION 90 WATT POWER SUPPLY PART NUMBER PA-1900-32P1 EFFECTIVE DATE : Nov. 26, 2012 MODEL: PA-1900-32P1 SPECIFICATION REV :B PAGE 1 OF 13 REV. ITEM DESCRIPTIONS OF CHANGE CHANGED REF.
CUSTOMER SPECIFICATION FOR APPROVAL AC/DC ADAPTOR
CUSTOMER SPECIFICATION FOR APPROVAL AC/DC ADAPTOR CUSTOMER SPEC:INPUT:100-240V AC 50/60Hz OUTPUT: 6.0VDC 2500mA CUSTOMER DWG./PART NO. Ktec PART NO. (LEAD FREE) SAMPLE NO: S32086 REV.: C ISSUE DATE: 2008-10-07
ENGINEERING SPECIFICATION SHEET SPEC. Revision History
SPEC. Revision History Revision Change Information Date No. Description Current version 2010/08/01 1 New revision Initial 2011-1-25 2 Fuse is changed T4.0A 2.0 2011-4-1 3 Add AC adapter external dimension
AC-DC POWER SUPPLY UNIVERSAL INPUT, DESK TOP, WATTS MEDICAL APPLICATIONS MUI310-A Series
AC-DC POWER SUPPLY UNIVERSAL INPUT, DESK TOP, 230-310 WATTS MEDICAL APPLICATIONS MUI310-A Series 2MOPP Medical FEATURES Universal Input Range 4000Vac Input/Output Isolation 2 X MOPP Class l Protection
120 WATT FLEX ATX TYPE WITH ACTIVE PFC
120 WATT FLEX ATX TYPE WITH ACTIVE PFC FXA120-W-F SERIES GENERAL SPECIFICATION This specification describes the performance characteristics of a grounded, with active PFC function, single phase, 120 watts,
ENGINEERING SPECIFICATION. 40W AC Adaptor. Part Number: PA W1
Engineering Specification ENGINEERING SPECIFICATION 40W AC Adaptor Part Number: PA-1400-26W1 Approval By: A Anson Hsu 2013.04.29 SHEET 1 of 10 Revision History Engineering Specification REV.X01, 2012.07.24
RoHS APPROVAL SHEET 15V/2.0A SERIES NO. (M04) EA1030CU CUSTOMER CUSTOMER P/N DESCRIPTION EDAC MODEL DATE REVISION 0 APPROVED DESIGN PREPARE
APPROVAL SHEET CUSTOMER CUSTOMER P/N DESCRIPTION EDAC MODEL 15V/2.0A SERIES NO. (M04) EA1030CU DATE 2013-04-01 REVISION 0 APPROVED DESIGN PREPARE RoHS CONCLUSION APPROVED CONDITON CUSTOMER S APP D SIGNATURE:
APPROVED SIGNATURES/ 客户确认. Manufacturer/ 制造商
SPECIFICATION FOR APPROVAL AC/DC ADAPTOR CUSTOMER SPEC:INPUT: 100-240V AC 50/60Hz OUTPUT: 5.0VDC 2500mA CUSTOMER DWG./PART NO. PART NO. SW3088 VI SAMPLE NO: S77717 REV.: A ISSUE DATE: 2015-10-14 PRODUCT
ENGINEERING SPECIFICATION SHEET. Table of Contents 1 SCOPE ELECTRICAL SPECIFICATION...5
Table of Contents 1 SCOPE...5 2 ELECTRICAL SPECIFICATION...5 2.1 INPUT REQUIREMENT... 5 2.1.1 Input voltage range... 5 2.1.2 Input frequency range... 5 2.1.3 AC inrush current... 5 2.1.4 Input current...
SPECIFICATION 全漢企業股份有限公司 R&D CHECK APPROVED REV. JOGE 01. FSP Technology Co.,Ltd. 台灣桃園市建國東路 22 號 TEL: FAX:
全漢企業股份有限公司 FSP Technology Co.,Ltd. 台灣桃園市建國東路 22 號 NO.22,jianguo E,Rd.,Taoyuan City, Taiwan,R.O.C. TEL:+886-3-375-9888 FAX:+886-3-375-6966 SPECIFICATION FSP 045-1S35-05 R&D CHECK APPROVED REV. JOGE 01 1
APPROVED SIGNATURES/ 客户确认. Manufacturer/ 制造商
SPECIFICATION FOR APPROVAL AC/DC ADAPTOR CUSTOMER SPEC:INPUT: 100-240V AC 50/60Hz OUTPUT: 15VDC 1000mA CUSTOMER DWG./PART NO. PART NO. SW3115 VI SAMPLE NO: REV.: A ISSUE DATE: 2015-12-22 PRODUCT NO: Unit
12W AC/DC interchangeable Adapter MU012-HA Series
FEATURES Universal input Voltage: 90-264VAC, 50/60Hz DoE Level VI efficiency Over voltage, Over current, Short circuit protection Fully enclosed plastic case AC plug interchangeable Small wall-mounted
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. PAGE :sheet 1 of 9 Item No. page 0 General 1 Input Requirements 2 2 Output
SPECIFICATION FOR APPROVAL AC/DC ADAPTOR
CUSTOMER SPECIFICATION FOR APPROVAL AC/DC ADAPTOR CUSTOMER SPEC:INPUT: 100-240V AC 50/60Hz OUTPUT: 5VDC 3000mA CUSTOMER DWG./PART NO. PART NO. KSAS0180500300VU(ROHS) SAMPLE NO: S79570 REV.: A ISSUE DATE:
5W AC/DC interchangeable Adapter MU005-HA Series
FEATURES Universal input Voltage: 90-264VAC, 50/60Hz DoE Level VI efficiency Over voltage, Over current, Short circuit protection Fully enclosed plastic case AC plug interchangeable Small wall-mounted
PRODUCT SPECIFICATION
Part Name: 91.50012.H01 Model No: HPC-500-H12S Document Version: A0 PRODUCT SPECIFICATION Release Date: 2010/6/30 Approved by : Checked by : Prepared by : HIGH POWER ELECTRONIC CO., LTD SIRFA International
Lite-On Power ChungHo Controlled. Do Not Copy.
Specification Model No: PB-1120-8SA1 Description: 12V 12W single output AC adapter Revision: A Issued Date: Mar. 13, 2013 Customer Part No.: 90, Chien I Rd, Chung Ho city, Taipei Hsien 235, Taiwan Tel:
3.3V & 5V max 150W, total output max 300W
SDX-300-24 300W, 24V Input DC-DC for ATX System 150 x 1 x 86 mm 5.90 x 5.51 x 3.39 inch Features: * Input and output isolation * Soft start function, low inrush current * Input over voltage and under voltage
APPROVED SIGNATURES/ 客户确认. Manufacturer/ 制造商
SPECIFICATION FOR APPROVAL AC/DC ADAPTOR CUSTOMER SPEC:INPUT: 100-240V AC 50/60Hz OUTPUT:12VDC 5000mA CUSTOMER DWG./PART NO. SW3101F-C2 PART NO. SW3101F C2 (PAHS+REACH+ROHS) SAMPLE NO: S83636 REV.: A ISSUE
電氣規格書 ESD NA
電氣規格書 ESD-00000321 FSP018-DHUN3 9NA0184200 SPEC/ Released Date:2018/04/27-04:27:59 TPS Elektronik GmbH * Senefelder Str. 8 * 41066 Mönchengladbach www.tps-elektronik.de * office@tps-elektronik.de * +49(0)21
ENGINEERING SPECIFICATION. 65W AC Adaptor. Part Number: PA P1
ENGINEERING SPECIFICATION 65W AC Adaptor Part Number: PA-1650-90P1 EFFECTIVE DATE: May 28, 2013 Customer Rev. Written By Approval By LITE-ON Technology Corp. PEGETRON X01 William Hsu SHEET 1 of 9 Revision
SPECIFICATION ESD FSP012-DWEA2 / 9NA Released Date:2012/10/05-16:57:28
SPECIFICATION ESD09084873 FSP012-DWEA2 / 9NA0121300 Released Date:2012/10/05-16:57:28 1/7 禁止翻印外洩 ESD09084873-R4.pdf 發行時間 :2012/10/5 Electrical Specification Revision History: Rev Description Date 1.0 SPEC
SPECIFICATIONS: PSAK650
FEATURES RoHS Compliant Power OK Signal (Power Good, Logic low) Intelligent LED Indicators Remote On/Off and Remote Sense Function High Efficiency up to 91% Forced Current Sharing at Parallel Operation
Model No. ( Single Output ) ATC-3.3S ATC-5S ATC-12S ATC-15S ATC-24S Max Output Wattage (W) 10W 10W 10W 10W 10W VAC or VDC
KEY FEATURES Switching Power Module for PCB Mountable Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Output Low Ripple and Noise Screw Terminal For Optional CE, UL,
CPCI - 6U - AC - 600W
Electrical Specification for: CPCI - 6U - AC - 600W Telkoor Part Number: 900-6115-0000 SCALE RELEASE DATE 13/12/08 SHEET 1 OF 7 REVISION HISTORY Rev Level Rev Date Change Made Reason for Change Effective
Ripple & Noise (max) (See Note 2) 5V output: 100mVp-p; 12V - 27V outputs: 150mVp-p; 48V output: 200mVp-p
FEATURES 3 Year Warranty 100% Full Load Burn-In Tested Universal AC Input / Full Range Built-In Remote Sense Function Built-In Remote ON/OFF Control Current Sharing up to 2000W (3+1) Forced Air Cooling
VER05 Series. xxx Series. 5 Watt. AC-DC Power Supplies. Models & Ratings. Input. Output
5 Watt xxx Series Energy Efficiency Level VI Barrel Jack & USB Versions Interchangeable Mains Connectors Included Universal Input Output Voltages from 5.0 V to 12.0 V Class II Construction Low Cost B R
Series MPM-815H 150W PFC MEDICAL ATX POWER SUPPLY
50W PFC MEDICAL ATX POWER SUPPLY FEATURES +5V Stand-by and Remote ON/OFF U, 50W convection cooled with ATX Input Active PFC for medical purpose Power good / Power fail signal Thermal protection EN 6060-,
VP ELECTRONIQUE MASSY - Tel
KEY FEATURES Switching Power Module for PCB Mountable Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Output Low Ripple and Noise Screw Terminal For Optional CE, UL,
Output Amps Model Number Output Voltage (max), (Note 2) Load Reg (max) Ripple & Noise pk-pk Efficiency typ.
Universal 90-264VAC Input High Efficiency Improved EMI Performance 3000VAC Isolation Single, Dual and Triple Outputs Full Safety Approvals As Small as 2.36 W x 3.41 L x 0.93 H (Single Output) Output Amps
7.5 Watt AC-DC Switch Power Supply
MAIN FEATURES: 7.5W Small Compact Size - PCB Mount Single Output - Regulated Output Range : 3.3VDC - 24VDC Input Range : 85VAC - 265VAC/47-63Hz Or 120VDC - 370VDC Very Low Standby Power Consumption < 0.15W
SPECIFICATION. SFX Form Factor. SST-ST45SF 450W Switching Power Supply Active PFC Circuit Full Range Input. SFX Form Factor
SPECIFICATION SFX Form Factor SST-ST45SF 450W Switching Power Supply Active PFC Circuit Full Range Input.GENERAL DESCRIPTION AND SCOPE This is the specification of Model SST-ST45SF; AC-line powered switching
Industrial Power Supplies
, Features For industrial, office and residential applications Ultracompact plastic housing Connection by spring clamp terminals or detachable screw terminal block Reliable snap-on mounting on DIN-rails
COMPUTER TECHNOLOGY CO., LTD. For Approval
PAGE :sheet 1 of 9 For Approval Page: 1-9 Date:2006/08/16 Rev: V1.0 Product: POWER SUPPLY Customer: Papouch MODEL No : SYS1196-0605-W2E PART No : SYS1196-0605 (RoHS) B.P/N : Check By: Cynthia 8/16/2006
GT-A81051-XXYY SERIES 5W
1. ELECTRICAL SPECIFICATIONS: INPUT VOLTAGE: INPUT CURRENT: INPUT FREQUENCY: U= 100-240 VAC; N= 100-120 VAC; E = 180-264VAC < 0.2 A RMS AT 90 VAC INPUT 47-63 HZ OUTPUT VOLTAGE / CURRENT: NORTH AMERICAN
SYSTIUM MODEL 526EX UATX
SYSTIUM MODEL 526EX UATX CONVERTIBLE MICRO-TOWER/DESKTOP The Systium Model 526EX is a small form factor uatx compliant convertible Micro-Tower/Desktop. The unique, long life design allows for the operation
12-15VDC (12V±5%) 24-28VDC (24V±5%)
Features Description Universal AC input (85-264VAC) Long 7 year warranty Protections: SCP, OVP, OCP, OTP 1% full load burn-in test DC OK indicator LED with relay contacts cooling by free air convection,
ABL1REM24100 regulated SMPS - single phase V input - 24 V output W
Characteristics regulated SMPS - single phase - 100..240 V input - 24 V output - 240 W Complementary Input voltage limits Network frequency limits Inrush current Main Range of product Product or component
SPECIFICATION. For SWITCHING POWER SUPPLY M/N: MPD-F113-V
SPECIFICTION For SWITCHING POWER SUPPLY M/N: MPD-F113-V Revision History REV. Oct. 1 st 2012 REV. Dec. 6 th 2012 REV. Jun. 4 th 2013 REV. Nov. 25 th 2015 Established Revised EMS performance and added mechanical
Series MPM-X12Y 120W PFC MEDICAL POWER ADAPTER
FEATURES 120W medical adapter with active PFC Green power CEC/Energy star group complied Designed to meet medical standard type BF rated Conductive EMI meets CISPR/FCC class B Wall mount mechanical construction
SPECIFICATION M/N: MPD-F For SWITCHING POWER SUPPLY. Revision History
SPECIFICTION For SWITCHING POWER SUPPLY M/N: MPD-F3- Revision History REV. Jan. 7 th 200 REV. Mar. 4 th 200 REV. Mar. 7 th 200 REV. Mar. 28 th 20 REV. Nov. 25 th 20 REV. Jul. 5 th 202 REV. Jun. 4 th 203
SAM Listed LED Optimized Drivers. Environmental. Electrical Specifications at 25 O C E Output Current. Voltage Accuracy
Model: LD40W480 UL SAM Series Drive Mode: Constant Voltage Technology: PFC Off-Line Switch Mode Power: 40W Max. Voltages: 1VDC or 4VDC Currents: 418mA - 3330mA Environmental 1. Operating temperature: Tc
LFWLP350 SERIES 350 Watt Open Frame Power Supply Measures: 5.00 x 3.00 x 1.00
Features 5 x 3 x 1 Inches Form factor 350 Watts with Forced Air Cooling & 200 Watts Convection Cooling Efficiencies upto 94% -40 to 70 degree operating temperature* 12V / 0.5A Fan Output, Thermal Shut-Down
Table of Contents. 1 General 1.1 Scope
Table of Contents 1 General 1.1 Scope 2 Input Characteristics 2.1 Input Voltage 2.2 Input Frequency 2.3 Max. Input AC Current 2.4 Inrush Current 2.5 Efficiency 3 Output characteristics 3.1 Nominal Operation
SAM Listed LED Optimized Drivers. Environmental. Electrical Specifications at 25 O C E Output Current. Voltage Accuracy
17 Watt s Model: LD UL SAM Series Drive Mode: Constant Voltage Technology: PFC Off-Line Switch Mode Power: Max. Voltages: 1VDC or 4VDC Currents: 175mA - 1400mA Environmental 1. Operating temperature: Tc
REVISION HISTORY Rev Level Rev Date Change Made Reason for Change Effective Approved By A 13/12/08 Specification Release 13/12/08 S. Sadot A1 13/02/09
Electrical Specification for: CPCI - 6U - DC - 600W Telkoor Part Number: 900-6113-0000 SCALE RELEASE DATE 13/12/08 SHEET 1 OF 7 REVISION HISTORY Rev Level Rev Date Change Made Reason for Change Effective
500Watts Medical Single Output
FEATURES Medical 60601-1 3 rd Edition approved U-Channel, End fan and Top fan types available Optional high efficiency OR-ing FET diode Current share function 2 year warranty ELECTRICAL SPECIFICATIONS
Universal input VAC <250mW No load power consumption -25 C to +80 C Operating temperature, with derating
Features Universal input VAC
Power Factor Model Number Voltage Voltage
LED Driver EUV040SxxxPS 20101014 D Features High Efficiency (Up to 87%) Active Power Factor Correction (Typical 0.92) Constant Output Current Lightning Protection Waterproof (IP66) Dimming Control AllRound
Enclosed Power Supplies
, 15 150 Watt Features Very compact metal cased power supplies High operating temperature up to 70 C Low no load power consumption
ENGINEERING CHANGE REQUEST
ENGINEERING CHANGE REQUEST CUSTOMER: KYSAN PART NAME: SWITCHING ADAPTOR MODEL NO.: DESIGNED NO.: MTR-08395 TYPE 五级能效 REV B 根据客户要求升级六级能效 DATE:Jun-3-2016 APPROVED SIGNATURES Mitra Electronics Co.,Ltd Drawn
efo Series Wide range AC/DC Single Output 1000W Rugged Power Supply Electrical Specification for: Telkoor Part Number:
Electrical Specification for: efo1000-124 Series Wide range AC/DC Single Output 1000W Rugged Power Supply Telkoor Part Number: 900-1124-1000 GENERAL SCALE RELEASE DATE 05/08/2012 SHEET 1 OF 6 Rev Level
ADAPTER SERIES SST-AD60-C
ADAPTER SERIES SST-AD60-C Compact, intelligent multi-voltage 60W USB Type-C adapter Maximum 60W 3A fast charging for USB Type-C equipped laptops, tablets, and mobile phones Intelligent detection and auto
Universal input VAC <150mW No load power consumption
Features Regulated Converter Description Universal input 85-64VAC
Over voltage protection: Output shutdown Weight: 73g
AC/DC Power Supply Single Output The BW-series is an open frame board with an optional cover. Simplified circuit design enabled cost optimisation and miniaturization. Safety design is applied to UL, CUL
12-15VDC (12V±5%) 24-28VDC (24V±5%)
Features DIN Rail Description Universal AC input (85-264VAC) Long 7 year warranty Protections: SCP, OVP, OCP, OTP 1% full load burn-in test DC OK indicator LED with relay contacts cooling by free air convection,
Parameter Condition Min. Typ. Max. Internal Input Filter 115VAC 230VAC 115VAC 230VAC. No load Power Consumption
Features Regulated Converter Universal input VAC 3W PCB mount package
CPCI - 6U - DC - 350W
Electrical Specification for: CPCI - 6U - DC - 350W Telkoor Part Number: 900-6001-0000 Approvals Name Date Written by: S. Sadot 13/3/08 Engineering: M. Heller 13/3/08 Sales & Marketing: B. Steinfeld 13/3/08
FEATURES. Nominal Output Voltage and Current
5W, AC-DC converter FEATURES 85-264V Universal AC or wide 100-370V DC Input Operating ambient temperature range: -40 to +85 High I/O isolation test voltage of up to 4000VAC Regulated output, Low ripple
ABP GROUP LIMITED SPECIFICATION FOR APPROVAL. Eckstein GmbH SAW GD. Manufacture Please check and confirm the specification
ABP GROUP LIMITED SPECIFICATION FOR APPROVAL Eckstein GmbH CUSTOMER PART NO PART NO: SAW15-051-2500GD DESCRIPTION 15W EU Power Adapter DATE 2017.03.01 Manufacture Please check and confirm the specification
ABL1REM24025 regulated SMPS - single phase V input - 24 V output - 60 W
Characteristics regulated SMPS - single phase - 100..240 V input - 24 V output - 60 W Main Range of product Product or component type Power supply type Rated power in W Input voltage Output voltage Power
CPS Industrial Power Supply
CPS Industrial Power Supply Power Supply Specification Model Number: FSAK C Series Industrial quality, 1U high, multiple output power supply AC Input: full range, active PFC. DC Output: 6 configurable,
RM22TG. Product data sheet Characteristics. three-phase control relay Vac, 2 C/O. Main. Complementary. Network number of phases
Characteristics three-phase control relay 183 528Vac, 2 C/O Main Range of product Product or component type Relay type Network number of phases Relay name Relay monitored parameters Time delay type Switching
Efficiency (1) 110Vac 220Vac
LED Driver EUC050SxxxDT 20110110 F Features Description The EUC050SxxxDT Series operate from a 90 ~ 30ac input range. These units will provide up to a 4200 ma of output current and a maximum output voltage
Efficiency (1) 110Vac 220Vac
LED Driver EUC025SxxxDS 20110110 G Features High Efficiency (Up to 84%) Active Power Factor Correction (Typical 0.92) Constant Output Current Waterproof (IP66) Dimming Control AllRound Protection: OVP,
Series Specifications Ta= 25 C, nom. Vin, full load and after warm-up unless otherwise stated) Parameter Condition Min. Typ. Max.
Features Regulated Converter Universal input VAC 4W PCB mount package
Packaging (5) Protection (3) Isolation Voltage (4)
Features Regulated Converters Regulated output with internal linear regulator Isolated.5W power in SMD package Up to 2kVDC isolation Industry standard pinout -4 C to + C operating temperature IEC/EN/UL62368-1
Electrical Specifications VAC/390 VDC, Universal (Derate from 100% at 100V AC to 90% at 90V AC)
WLP350 Industrial Features 5 x 3 x 1 Inches Form factor 350 Watts with Forced Air Cooling & 200 Watts Convection Cooling Efficiencies upto 94% -40 to 70 degree operating temperature* 12V / 0.5A Fan Output,
RM35LM33MW liquid level control relay RM35-L V AC/DC
Characteristics liquid level control relay RM35-L - 24..240 V AC/DC Complementary reset time maximum switching voltage Main range of product product or component type relay type relay name relay monitored
RM35JA32MR Current control relay 0.15A 15A, 2 C/O
Characteristics Current control relay 0.15A 15A, 2 C/O Main Range of product Product or component type Relay type Relay name Relay monitored parameters Time delay type Switching capacity in VA Measurement
Series AMEPR60C-AZ up to 5A AC-DC / DC-DC LED Driver / Converter
Click on Series name for product info on aimtec.com Series AMEPRC-AZ Models Single output Model Max Output Power (W) 1 FEATURES: Output Voltage Range (V) 3 Output Current 3 AMEPRC-120AZ 36-0 - 1.20 AMEPRC-361AZ
Standards VDE: EN60950; UL1950; C-UL: CSA C22.2 No.234; IEC950; VDE0805
AC/DC Power Supply Multi-output Wide range input for world-wide use (85 264 Vac). This series is a 3ch output model. Features Wide input voltage range: 85-264Vac 110-370Vdc High efficiency & reliability
IEC/EN/UL60950 & CE certified, EN55032 Class B
Features Regulated Converter Universal input VAC 4W PCB mount package
(ATX12V) Uninterrupted Switching Power Supply Technical Specification
AUP-X-400-V4 (ATX12V) Uninterrupted Switching Power Supply Technical Specification Part No. REVISION HISTORY VERSION RELEASE DATE NOTES DATE 1. MAR-2011 IMPROVE THE EFFICIENCY NOT LESS THAN 80% AND COMPLAIN
ABL8BBU24200 battery control module V DC - 24 V - 20 A - for regulated SMPS
Characteristics battery control module - 24..28.8 V DC - 24 V - 20 A - for regulated SMPS Main Range of product Product or component type Input voltage Output voltage Maximum output current Phaseo Battery
SPECIFICATIONS. Input Output Agency Approvals 0 ~ 62.5A. toll-free (603)
Technical Data Sheet 750 Watt, 12 Volt, Single Output Power Supply With PFC, Voltage & Current Trim Functions UNIT CODE PS-RSP 750-12 DESCRIPTION 750 Watt 12 Volt, Single Output Power Supply with PFC plus
ABL8MEM12020 regulated SMPS - 1 or 2-phase V AC - 12 V - 2 A
Characteristics regulated SMPS - 1 or 2-phase - 100..240 V AC - 12 V - 2 A Main Range of product Product or component type Power supply type Input voltage Output voltage Rated power in W Input protection
VEL05 Series. xxx Series. 5 Watt. AC-DC Power Supplies. Models & Ratings. Input
5 Watt xxx Series Energy Efficiency Level VI Barrel Jack & USB Versions Fixed Mains Connectors Universal Input Output Voltages from 5.0 V to 12.0 V Class II Construction Low Cost BRAND The VEL05 series
ABL8REM24050 regulated SMPS - 1 or 2-phase V AC - 24 V - 5 A
Characteristics regulated SMPS - 1 or 2-phase - 100..240 V AC - 24 V - 5 A Main Range of product Product or component type Power supply type Input voltage Output voltage Rated power in W Input protection
VEL05 Series. xxx Series. 5 Watt. AC-DC Power Supplies. Models & Ratings. Input
5 Watt xxx Series Energy Efficiency Level VI Barrel Jack & USB Versions Fixed Mains Connectors Universal Input Output Voltages from 5.0 V to 12.0 V Class II Construction Low Cost B R A N D The VEL05 series
ABL8BBU24400 battery control module V DC - 24 V - 40 A - for regulated SMPS
Characteristics battery control module - 24..28.8 V DC - 24 V - 40 A - for regulated SMPS Main Range of product Product or component type Input voltage Output voltage Maximum output current Complementary
Series AMEL10-MJZ 10 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com Models Single output Model Input Voltage (VAC/Hz) FEATURES: Input Voltage (VDC) Max Output wattage (W) Output Voltage (V) Output Current max (A) Maximum
SWITCHING POWER SUPPLY SPECIFICATION TEMPLATE
SWITCHING POWER SUPPLY SPECIFICATION TEMPLATE SWITCHING POWER SUPPLY 1.0 Scope 2.0 Input requirements 2.1 Voltage 2.2 Stead-state current 2.3 Inrush current 3.0 Output requirements 3.1 DC load requirements
Parameter Condition Min. Typ. Max. Internal Input Filter. nom. Vin = 230VDC 115VAC 230VAC 115VAC 230VAC. No load Power Consumption
Features Regulated Converter Universal input VAC 3W PCB mount package
MPM-U653-DCF-B M/N: MPM-U653-DCF-B. 650W Medical AC / DC SPECIFICATION FOR SWITCHING POWER SUPPLY. Revision History
SPECIFICATION FOR SWITCHING POWER SUPPLY M/N: Revision History Version Date Change Items Rev. 1.0 July.21. 2017 Established. Page 1 Models & Ratings FEATURES 650W medical power supply with force air cooling.
EPT W 5V 2.4A ±5% EPT W 7V 1.71A ±5% EPT W 9V 1.5A ±5% EPT W 12V 1.25A ±5% EPT W 15V 1.0A ±5%
15 Watts US DoE Energy efficiency level VI Interchangeable input plugs Class II Single outputs 5 to 48V EN55022 Level B conducted & radiated 5 Year warranty The EPT15 range of wall plug adaptors are compliant
APPROVED SIGNATURES/ 客户确认. Manufacturer/ 制造商
CUSTOMER SPECIFICATION FOR APPROVAL AC/DC ADAPTOR CUSTOMER SPEC:INPUT: 100-240V AC 50/60Hz OUTPUT: 5.0VDC 1000mA CUSTOMER DWG./PART NO. PART NO. (PAHS+REACH+ROHS) SAMPLE NO: S69105 REV.: A ISSUE DATE: