PROFESSIONAL AUDIO AND MEDIA APPLICATIONS
|
|
- Buck Gallagher
- 5 years ago
- Views:
Transcription
1 FIBER OPTIC TRANSPORT SYSTEM FOR PROFESSIONAL AUDIO AND MEDIA APPLICATIONS
2 LightViper Components VIS-1832 The VIS-1832 is the normally used as the head end (stage) device. It is intended for applications where analog mic/line level inputs will be used. It contains (32) analog inputs on Neutrik Combo connectors. Each input contains a mic pre-amp, each with a 3 position gain switch and individual LED clip indicators which begin to illuminate at 3dB before clipping. There are (4) +48v phantom power on/off switches that activate phantom power in groups of (8). There are (8) analog line level outputs (returns) on XLR connectors. The VIS-1832 contains a primary transmit (Tx) and receive (Rx) pair of fiber optic connectors. An additional (2) splits (transmit only) can be added as an option. The VIS-1832 will operate at 48k or 96k. It comes standard with fiber connectors, with other connector types optional. It also contains a control port. This TTL data port is used to connect LightViper accessory devices such as the DMX4 (DMX lighting control) & MD-3 (RS-232/MIDI/RS422), allowing these data types to be transported on the same fiber as the audio returns. The VIS-1832 is convection cooled and can also be rack mounted using the VER-1832 rack mount kit. The VIS-1832 operates at 90VAC - 250VAC via a Neutrik PowerCon connector. See part numbering key on pg. 7 VIS-4832 The VIS-4832 is normally used as the head end (stage) device. It is intended for applications where AES3 digital inputs will be used such as in transporting the digital outputs of other manufacturers remote mic pre-amps. It can also be used for transporting the outputs of a digital console when used in a drive snake application. The VIS-4832 contains ( ) AES inputs and (8) analog OR (8) AES digital outputs, all on DB-25 connectors. The VIS-4832 contains a primary transmit (Tx) and receive (Rx) pair of fiber optic connectors. An additional (2) splits (Transmit only) can be added as an option. It comes standard with fiber connectors, with other connector types optional. The VIS-4832 will operate at 48k or 96k. It also contains a control port. This TTL data port is used to connect LightViper accessory devices such as the DMX4 (DMX lighting control) & MD-3 (RS-232/MIDI/RS422), allowing these data types to be transported on the same fiber as the audio returns. This port is also used to transport Yamaha control data to the Yamaha AD8HR mic preamps using the DGL-422 dongle. The VIS-4832 is convection cooled and operates at 90VAC - 250VAC via a standard IEC connector. See part numbering key on pg. 7 VIM-1832 The VIM-1832 is normally used as the tail end when connected to a VIS-1832 or VIS This unit contains (32) analog AND (32) AES digital outputs, and (8) analog OR (8) digital inputs, all on DB-25 connectors. The VIM-1832 contains a primary transmit (Tx) and receive (Rx) pair of fiber optic connectors. The VIM-1832 will operate at 48k or 96k. It comes standard with fiber connectors, with other connector types optional. This unit contains the system clock which can be switched to operate at 48k or 96k. There is an external clock input, allowing the VIM-1832 to slave to an external clock, as well as word clock & super clock output, all on BNC connectors. The VIM-1832 contains a control port. This TTL data port is used to connect LightViper accessory devices such as the DMX4 (DMX lighting control) & MD-3 (RS-232/MIDI/RS422), allowing these data types to be transported on the same fiber as the audio returns. The VIM-1832 is fan cooled and operates at 90VAC - 250VAC via a standard IEC connector. See part numbering key on pg. 7
3 LightViper Components VIM-1032 The VIM-1032 is used on the tail end of the optional system splits, to feed a monitor console, broadcast truck, or recording system. The VIM-1032 is exactly the same as the VIM-1832 with two exceptions - the VIM-1032 does not have inputs and cannot be a clock master in the system. This unit has (32) outputs and (0) inputs. See part numbering key on pg. 7 VIM-1808/0808 The VIM-1808 / 0808 combination is an 8x8 fiber optic transport system. Both units are identical except the 1808 contains both the internal clock as well as a clock in connection while the 0808 does not. There are (8) analog line level inputs OR (8) AES digital inputs, and (8) analog line level outputs AND (8) AES digital outputs, all on DB25 connectors. The VIM-1808 & VIM-0808 contain a primary transmit (Tx) and return (Rx) pair of fiber optic connectors. These devices come standard with fiber connectors, with other connector types optional. The VIM-1808 contains the system clock which can be switched to operate at 48k or 96k. There is an external clock input on the VIM-1808, allowing it to slave to an external clock. There are word clock & super clock outputs on both units, all on BNC connectors. The VIM-1808/0808 both contain a control port. This TTL data port is used to connect LightViper accessory devices such as DMX4 (DMX lighting control) & MD-3 (RS-232/MIDI/RS422), allowing these data types to be transported on the same fiber as the audio returns. The VIM-1808 & VIM-0808 are fan cooled and operate at 90VAC - 250VAC via a standard IEC connector. See part numbering key on pg. 7 EF-2 The EF-2 is a two channel Ethernet to fiber converter. These devices are used in pairs with one converting Ethernet to fiber, and the other converting fiber back to Ethernet. The EF-2 will accept (2) independent channels of 10/100 Ethernet (In/Out) on (2) Neutrik EtherCon connectors, and (2) fiber optic connections (In/Out) via (2) pairs of connectors, with other types of fiber optic connectors available. It converts the Ethernet signals into two (2) fiber optic transmit/receive pairs on one end, and converts the fiber optic transmit/receive pairs back to Ethernet on the other end. There is a choice of three operating configurations - standard Ethernet using Transmit (TX) and Receive (RX) pairs; two (2) channels of single direction Ethernet (TX-only) - or a combination of both modes. The EF-2 ignores packet structure and data content, thus facilitating transparent use with AVIOM s Pro16 Monitor Mixing System, CobraNet EtherSound or any Physical Layer Ethernet. The EF-2 is convection cooled and operates at 90VAC 250VAC via standard IEC connector. The EF-2 can also be DC powered with a 9-18 VDC supply using the provided DC power connectors.
4 LightViper Components VIM-MY32 Card Series Fiber-Optic YGDAI cards for Yamaha digital consoles The MY32 YGDAI Cards enable users of Yamaha digital consoles and devices containing YGDAI card slots to interface with LightViper VIS-1832 & VIS-4832 devices via direct digital fiber-optic input to the console, yielding a completely digital fiber optic link. VIM-MY32M This master card provides (16) inputs (sends from stage) to the console, and (8) outputs (returns to stage). The VIM-MY32M can be fit with, ST, Neutrik Duo, Neutrik Quad or TAC4 fiber optic connectors. For systems containing more than (32) input channels, the master card contains (2) fiber optic pass thru connectors, allowing channels to be connected via fiber to a second master card. The VIM-MY32M contains a 48k master clock, and can either send clock to the console and distribute it to the rest of the system (master), or accept external clock from the console and distribute it to the rest of the system (slave). The VIM-MY32 cards operate only at 48k. VIM-MY32S This slave card is connected to the master card via a Neutrik MiniCon cable. There are no fiber optic connectors on the VIM-MY32S. By using a combination of VIM-MY32M (master) and VIM-MY32S (slave) cards you can achieve a variety of configurations as follows: (1) VIM-MY32 master - 16x8 system using (1) card slot (1) Master and (1) Slave card - 32x8 system using (2) card slots (2) Masters and (1) Slave card - 48x16 system utilizing (3) card slots (2) Masters and (2) Slave cards - 64x16 system using (4) card slots The VIM-MY32 cards distribute word clock throughout the system (similar to using the LightViper VIM-1832) and can transport Yamaha RS422 control (with DGL-422 dongles or a 9 pin to 9 pin control cable) to remotely control Yamaha AD8HR microphone preamps on stage when paired with a LightViper VIS The VIM-MY32 cards can also transport DMX lighting control (using a pair of DMX4 units). RS422 control for a Yamaha LS9 is provided on the back plane of the MY32 card itself as there is no control output connector on an LS9. A toggle switch on the slave card chooses whether the RJ45, 9 pin, or internal control connection (LS9) is active. See part numbering key on pg. 7 VIM-2032 The VIM-2032 has been designed for applications where VIM-MY32 cards are being used. There can be situations where a VIM-MY32M master card is used without a mating slave card due to a lack of card slots. The VIM-2032 acts as a slave card that provides (32) channels of analog AND (32) channels of digital output, enabling the user to gain access to (32) channels of output. This includes channels that would have been on the mating slave card channels PLUS a (16) channel split of the channel 1-16 inputs coming into the master card. One application would be to use outputs of the VIM-2032 and input these into the XLR mic inputs of the Yamaha console, thereby gaining the ability to retrieve all possible channel inputs available on the console even with a lack of available card slots. The VIM-2032 contains a single fiber thru connector (transmit only) allowing all data coming into the device to be output on fiber and transported to another location. The VIM-2032 can operate at 48k only. The VIM-2032 must be connected to a system containing a VIM-MY32M YGDAI card which provides clock to the system. There are word clock and super clock outputs on BNC connectors and a Neutrik MiniCon connector used for connecting the VIM-2032 to a VIM-MY32M master card. The control connection is a TTL data port which appears on an EtherCon connector. It allows LightViper accessory devices such as the DMX4 (DMX lighting control) or MD3 (RS422/232/MIDI) to be connected to the unit,, as well as Yamaha RS422 control using the DGL-422 dongle connecting the D9 on the console to the EtherCon connector. See part numbering key on pg. 7
5 Accessories DMX4 Lighting Control Multiplexer The DMX4 lighting control multiplexer consists of two units; the DMX4i input unit and the DMX4o output unit. These devices allow the transport of (4) universes of DMX lighting control, or (3) universes plus Yamaha RS422 control from FOH to stage on the same fiber as the (8) audio returns. No additional fiber is required to add DMX4 units to your system. Each unit contains (4) 3-pin XLR and (4) 5-pin XLR inputs / outputs, a 9 pin connector for Yamaha RS422 control. Neutrik EtherCon connectors on both the front and rear panel provide the interface with LightViper VIS-1832, VIS-4832 or VIM-1808/0808 devices. Power for the DMX4i and DMX4o is derived from the LightViper device to they are connected to. There are EtherCon connectors on the front and rear panel wired in parallel, so you can choose either connector to connect your system depending on what is most convenient given your rack configuration. These units are normally sold in pairs, one DMX4i and one DMX4o. MD-3 The MD-3 is a multiple control interface device for translating RS-422, RS-232 or MIDI control signals through the TTL control port on LightViper Series 32 devices, allowing these data types to be transported on the same fiber as the audio returns. The MD-3 has (3) three connectors on its front panel: RS-422, MIDI, and RS-232. The rear panel contains (3) three RJ45 connectors and a single switch. The switch is used to determine whether MIDI is being sent or received. The MD-3 derives power via the connection between the RJ-45 control connector on the LightViper device and the RJ-45 connector on the MD-3. The MD-3 is used in pairs with one MD-3 required at each end of the system.
6 Accessories Fiber Connector Panel Options VPL Panels These 1U panels allow mounting of various tactical & non-tactical fiber optic connectors, as well as many other types of connectors. See part numbering key on pg. 7 Flush-Mount Wall Box Option VBZ-1832 The VBZ-1832 is an optional flush mount wall box version of the VIS-1832.The VBZ-1832 consists of a steel back box with adjustable mounting brackets. The VIS-1832 is mounted on a panel that is fit to the back box. The VBZ-1832 back box contains a single gang AC junction box with knock outs for connecting conduit for the AC run. There are also knock outs in the back box for connecting conduit housing the install fiber. An fiber connector bracket is supplied that attaches to the back box. Custom Works Fiberplex can accommodate many custom requests. We can fit units with single mode optics rather than multi-mode (standard on 1832, 4832 and 1808/0808 systems). We can fashion stainless steel chassis and provide conformal coating of circuit boards for harsh salt water environments. We can provide custom cable lengths and configurations, or a variety of connector types. If you have custom needs or unique applications, please call us to see what we can do for you.
7 Ordering Information These part numbering keys allow specification and ordering of the correct part numbers. Part numbers vary depending on the type of optics, whether the device has splits or not, and the type of fiber optic or other connectors needed. VIS S - O2 Mechanical Package VIS = Floor Box VRK = Rack Mount (5U) VBZ = Flush Wall Mount VIM S - O2 VIM S - O2 Hole Position VPL B E P Rack Spaces Holes (3 or 6) Connector 0 = Blank 1 = 2 Connectors 2 = 4 Connectors 3 = 2 ST Connectors 4 = 4 ST Connectors 5 = Neutrik OpticalCon Duo 6 = Neutrik OpticalCon Quad 7 = TAC4-JR- 8 = TAC4-JR-ST E = Neutrik Ethercon P= Neutrik Powercon M = XLR Male F = XLR Female B = BNC VIS S - O2 VIM S - O2 EF2 - S - VIM-MY32S Slave Card (no options) VIM-MY32M - S - O2 FC- V M2 LL Length (meters) Packaging 0 = No Reel 1 = Plastic Reel 2 = REL-380 (up to 100m Tactical) 3 = REL-R460 (up to 150m Tactical) 4 = Pulling Eye Fiber Channels Connector Type C = None, Blunt End L= SC T= ST S = SC F = FC A=TAC (4, 6 or 12 ch only) (select 1 connector per end) M1 = 62.5/125μm Multimode (OM1) M2 = 50/125μm Multimode (OM2) M3 = 50/125μm Multimode (OM3) S1 = 9/125μm Singlemode (OS1) Jacket Type V = PVC, Installation P= Plenum, Installation T=Tactical NOTE: Not all combinations are valid VIM S - O2 VIM S - O2
8 Made in the USA by Fiberplex Technologies L
LightViper Components
Fiber Optic Transport System For Professional Audio And Media Applications The Global Leader In Secure Digital Communications LightViper Components VRK-1832 The rack-mounted VRK-1832 is normally used as
More informationUSER MANUAL VIS 1832/VIM fiberplex.com Phantom Power. Clip. Made in the USA. Primary S1-S8. Phantom Power.
VRK-8 Made in the USA S S S S4 S5 Primary S-S8 S9 S S S S S9-S6 S7 S8 S9 S S S7-S4 S5 S S7 S8 S9 S5-S R Sync R R TECHNOLOGIES, LLC fiberplex.com.64. USER MANUAL VIS 8/VIM 8 R4 R5 Warning for Your Protection.
More informationAUDIO DISTRIBUTION & NETWORKING
AUDIO DISTRIBUTION & NETWORKING AUDIO DISTRIBUTION & NETWORKING AVIOM S PRO64 SERIES With an unprecedented combination of flexibility, simplicity, and performance, the Pro64 Series from Aviom makes high
More informationSnake / E Snake 2 (ES2)
Snake / E Snake 2 (ES2) Send E Snake and ES2 Directly Into Digital Consoles... and control E Snake's mic preamps directly from Yamaha digital console control surfaces that have remote HA capability! The
More informationVersion 1.1b December AVB32-ES User s Manual AuviTran
AVB32-ES USER S MANUAL Version 1.1b December 2005 AVB32-ES User s Manual AuviTran 2005 1 TABLE OF CONTENTS 1- WELCOME!... 3 2- ELECTRICAL AND ELECTRONIC INTERFERENCES RISKS... 3 3- LIMITATION OF LIABILITY...
More informationSYNAPSE. High Channel Density Networked Audio Interfaces AES67. Common Features DM 1. D32 o. D32 i. Product Family Overview. Applications.
High Channel Density Networked Audio Interfaces Product Family Overview Product The Synapse product family adds high performance, high channel density analog and digital audio connectivity, monitoring
More informationUSER GUIDE 1 of 26 STAGEGRID 4000 User Guide rev.01 abr-18
USER GUIDE 1 of 26 STAGEGRID 4000 User Guide rev.01 abr-18 SUMÁRIO About... 2 STAGEGRID 4000... 2 SoundGrid... 3 System Requirements... 3 Hardware... 4 Package Contents... 4 Rack Installation... 5 Setups...
More informationStuder D21m. I/O System Components. Condensed Information
Studer D21m I/O System Components Condensed Information 2 The D21m I/O System The D21m I/O system provides very cost-effective inputs and outputs with maximum flexibility while maintaining the well-known
More informationInstall AV Catalog. Effective Q Attero Tech, LLC.
Dante Product Group und32 32 Channel Break Out Interface 32 unique output channels from a Dante network Individual volume control on each output (controlled from front panel or via software over the network)
More informationPRELIMINARY DATA SHEET AM 1 AUTOMIXER SHIPS APRIL 2010
PRELIMINARY DATA SHEET SHIPS APRIL 00 AM MIC INPUTS 4 MIC AUX AUX SOURCE PHONES AUX AUX MICS AM G OL G OL G OL LOCATE General Description The Rane AM is part gain-sharing automatic mic mixer, part manual
More informationPHB-200M/PHB x 100/1000Base-T to 20x100/1000Base-X SFP Patching Hub
SFP Patching Hub PHB-200M/PHB-200 20x 100/1000Base-T to 20x100/1000Base-X SFP Patching Hub PHB-200M is a 20-channel Managed SFP patching hub that converts copper 100/1000Base-TX to SFPs working at 100Mbps
More informationFull HD 1920x1200 DVI USB Matrix Extender over IP
Full HD 1920x1200 DVI USB Matrix Extender over IP IP-controlled matrix switching 1920x1200 DVI USB extension Model No. : DSE-1025 DSE-1025 is the state-of-the-art Over-IP DVI USB Matrix Extender which
More informationAPS SCALE SERIES DIMENSIONS
APS SCALE SERIES DIMENSIONS 4300 Section page 4 Model APS4300 Recommended Column/Base Combinations 14 Atlas Column 20 Atlas Column 30 Atlas Column Atlas Scale Series Dimensions: 4300 OPTIONS 4300 Section
More informationSystem Interface Unit SIU-100/100T
System Interface Unit /100T Since its introduction, the Digital Mixer has opened up an entirely new set of opportunities for affordable PA and sound-recording applications. Recognizing the ever-increasing
More informationLA-RAK II TOURING RACK
LA-RAK II TOURING RACK Signal/Network/Power distribution Usable worldwide (90V-265V, 50/60 Hz) Three LA12X for maximum flexibility and power Flyable with engineered 9U frame Electric/mechanic compatibility
More informationPHB-200M PHB x 100/1000Base-T to 20x 100/1000Base-X FE/GbE Media Converter Concentrator
Media Converter Concentrator PHB-200M PHB-200 20x 100/1000Base-T to 20x 100/1000Base-X FE/GbE Media Converter Concentrator PHB-200M is a 20-channel Managed Media Converter that converts copper 100/1000Base-TX
More informationPHB-200M PHB x 100/1000Base-T to 20x 100/1000Base-X
SFP Patching Hub PHB-200M PHB-200 20x 100/1000Base-T to 20x 100/1000Base-X SFP Patching Hub PHB-200M is a 20-channel Managed SFP patching hub that converts copper 100/1000Base-TX to SFPs working at 100Mbps
More informationHD-3500 Series. HD Video, Audio, Data & Tally/GPIO Channels FEATURES
FEATURES w w 1 SDI, up to 3Gbs Supports SMPTE -424M -259M -292M -310M Ethernet EQ s and re-clocks w w 4 analog audio or 2 (AES to Base) Two 4-wires for intercom 3 data (RS232, 422, 485) 4 GPIO 1 1, 2 or
More informationCisco Prisma II Platform
Cisco Prisma II Platform In optical transmission systems, the network platform forms the foundation of the product family. The Cisco Prisma II platform provides network operators with the unique features
More informationSeparate Video from Audio and Peripheral Data
VelocityKVM Thinklogical s VelocityKVM systems offer best-in-class fiber optic performance with advanced video, audio and peripheral capabilities. VelocityKVM extenders offer 6.25Gbps bandwidth, to achieve
More informationSEL-2414 Transformer Monitor
SEL-2414 Transformer Monitor SEL-2414 Base Unit Vertical Chassis Front Panel Large LCD Display 4 Programmable Pushbuttons w/leds 7 Programmable LEDs Operator Control Interface EIA-232 Port Processor and
More informationOverview. Features. Technical Data Sheet 1 / 6. Mixing Console MG10. MG10 is a versatile mixer suitable for a wide range of users and applications.
Overview MG10 is a versatile mixer suitable for a wide range of users and applications. Rear Panel Features Input channels: 10 Line Inputs (4 mono, 3 stereo), 4 Mic Inputs with 48V phantom power and HPH
More informationModel 204 Announcer s Console Featuring Dante Technology
Model 204 Announcer s Console Featuring Dante Technology Key Features Dante audio-over-ethernet technology Digital audio and direct-microphone outputs One main and one talkback output channel Highly-flexible
More informationHDx TDM Record/Playback Option Guide
HDx TDM Record/Playback Option Guide Version 1.0 for D-Show Digidesign 2001 Junipero Serra Boulevard Daly City, CA 94014-3886 USA tel: 650 731 6300 fax: 650 731 6399 Technical Support (USA) tel: 650 731
More informationOverview. Features. Technical Data Sheet 1 / 6. Mixing Console AG03
Overview AG03 is a multi-purpose mixer with USB audio interface, especially optimized for webcasting. Rear Panel Features Input channels: 3 Line Inputs (1 mono, 1 stereo), 1 Mic Inputs with 48V phantom
More informationOverview. Features. Technical Data Sheet 1 / 6. Mixing Console AG06
Overview AG6 is a multi-purpose mixer with USB audio interface, especially optimized for webcasting. Rear Panel Features Input channels: 6 Line Inputs (2 mono, 2 stereo), 2 Mic Inputs with 48V phantom
More informationACU-M Quick Start Guide
Purpose Congratulations on your purchase of the JPS Interoperability Solutions ACU-M. The purpose of the ACU-M Quick Start Guide is to provide a quick reference for configuration and operation of the ACU-M.
More information16x16 Modular Matrix Switch VM1600
16x16 Modular Matrix Switch The Modular Matrix Switch offers advanced access and real-time control of multiple local and remote A/V input devices and displays from a single chassis. The allows users to
More informationInstall AV Catalog. Effective Q Attero Tech, LLC.
Dante Product Group und32 32 Channel Break Out Interface 32 unique output channels from a Dante network Individual volume control on each output (controlled from front panel or via software over the network)
More information32 x 32 Modular Matrix Switch
32 x 32 Modular Matrix Switch The Modular Matrix Switch offers advanced access and real-time control of multiple local and remote A/V input devices and displays from a single chassis. The allows users
More informationIP-3000 Series. IP Network Public Address System. Monitoring and setting can be done easily by logging-in to control GUI via browser.
IP-3000 Series www.toa.com.hk IP Network Public Address System Monitoring and setting can be done easily by logging-in to control GUI via browser IP-3000 Series IP Network Public Address System Description
More informationAffordable Networked AV. text PRODUCT CATALOG Installed AV. Attero Tech, LLC 1315 Directors Row Fort Wayne, IN (260)
PRODUCT CATALOG 2013 Installed AV Attero Tech, LLC 1315 Directors Row Fort Wayne, IN 46808 (260) 496-9668 www.atterotech.com Issued July 2013 Dante Attero Tech und32 32-Channel Breakout Interface The und32
More informationCisco ONS CL Shelf Assembly Hardware
CHAPTER 1 This chapter provides a description of Cisco ONS 15310-CL shelf hardware. Instructions for installing equipment are provided in the Cisco ONS 15310-CL and Cisco ONS 15310-MA Procedure Guide.
More informationQuick-Start Installation Guide
Quick-Start Installation Guide OMNIA VOLT (HD-PRO VERSION) THANK YOU FOR purchasing the OMNIA VOLT. We have made this Omnia processor easy to set up and configure. This quick-start guide will take you
More informationPower Quality and Recording Field Upgrade Available SEL-734, Standard Power Quality, 32 MB Memory SEL-734P, Advanced Power Quality, 128 MB Memory*
SEL-734 Advanced Metering System with ANSI and IEC Class 0.2 Accuracy Standard with: ANSI Type 2 Optical Port, 2 Rear EIA-232 Ports, ACSELERATOR QuickSet SEL-5030 Software, Modbus RTU Communications Protocol,
More informationINSTALLATION INSTRUCTIONS. ACB-100 Audio Control Board. This document describes the installation procedure for the ACB-100 Audio Control Board.
INSTALLATION INSTRUCTIONS MicroComm DXI -00 Audio Control Board. Intent & Scope This document describes the installation procedure for the -00 Audio Control Board. 2. Description The -00 Audio Control
More informationFeatures and Benefits. Certifications
EDS-P206A Series 6-port unmanaged Ethernet switches with 4 IEEE 802.3af/at PoE+ ports Features and Benefits IEEE 802.3af/at compliant PoE and Ethernet combo ports Up to 30 W output per PoE port 12/24/48
More informationDigital Mixing Consoles
digital mixing consoles Digital Mixing Consoles Because of the modular nature of Vi2/4/6 consoles it is always possible to make custom configurations for these 3 models. Please contact us for a personalised
More informationMACH100 19" Industrial Workgroup Rack-Mount Switches
MACH100 19" Industrial Workgroup Rack-Mount Switches Fast Ethernet Uplink Ports, Gigabit Ethernet Uplink Ports, and 10 Gigabit Uplink Ports The MACH100 series of switches are offered in versions with 8,
More informationUSB Interface. Power Supply. Manual Raise/Lower Operators. Communications Port (Port 1) Communications Port (Port 2)
SEL-2431 Single-Phase Voltage Regulator Control, Two 120 Vac Voltage Inputs, Eight Contact Inputs (Two 120 Vac Programmable, Four 12 Vdc Self-Whetted Programmable, and Two Dedicated), Seven Contact Outputs
More informationSEL-2411 Programmable Automation Controller
SEL-2411 Programmable Automation Controller - Chassis - Processor and Communications Board - Front Panel - EIA-232 Port - LCD Display - IRIG-B Time Code - Operator Control Interface - Power Supply with
More informationNew Products. January A 1U rackmount unit for mixing & monitoring up to 24 x AoIP streams into headphones, speaker and analogue outputs.
New Products January 2018 AES67 12 x 2 Channel Mix Monitor A 1U rackmount unit for mixing & monitoring up to 24 x AoIP streams into headphones, speaker and analogue outputs. AVN-PXH12 12 x 2 Channel Mixer
More information16x16 Modular Matrix Switch VM1600A
16x16 Modular Matrix Switch The Modular Matrix Switch offers advanced access and real-time control of multiple local and remote A/V input devices and displays from a single chassis. The allows users to
More informationWireless DMX Control. Show Performer DMX Controller. Stage Desk 48 DMX Controller
Wireless DMX Control SRC-260 Each unit is a transmitter and receiver based on its Dip settings. Connect a DMX 512 standard controller to the SRC-260 and set another SRC-260 set in receivers mode down range
More informationFOMi-40 Fiber Optic Modem with Remote Management
Data Sheet FOMi-40 Provides a secure and long-range data link of up to 100 km (62 mi) Selectable data rates from 56 to 2048 kbps Multimode or single mode operation Extended transmission range up to 100
More informationFMUX1001 Modularized 16E1/T1 + 4x GbE Managed Fiber Multiplexer FMUX101 Modularized 16E1/T1 + 4x FE Managed Fiber Multiplexer
Modularized 16E1/T1 Managed Multiplexer FMUX01 Modularized 16E1/T1 + 4x GbE Managed FMUX1 Modularized 16E1/T1 + 4x FE Managed The FMUX01/FMUX1 is a 1U, 19" rack mountable, PDH fiber optic multiplexer that
More informationINDUSTRIAL POE SWITCH
STEP X - Name of Step QUICK START GUIDE LIE1014A, LIE1080A, LIE1082A INDUSTRIAL POE SWITCH 24/7 TECHNICAL SUPPORT AT 877.877.2269 OR VISIT BLACKBOX.COM STEP 1 - Hardware Description LIE1014A LIE1080A TABLE
More informationLIGHTING & POWER PRODUCT GUIDE HAND SOLDERED SINCE DMX - MULTI PIN - POWER DISTRIBUTION - EXTENSION CORDS
HAND SOLDERED SINCE 1981. LIGHTING & POWER DMX - MULTI PIN - POWER DISTRIBUTION - EXTENSION CORDS PRODUCT GUIDE 1-800-346-3462 WWW.CBICABLES.COM 6152 COUNTY SEAT ROAD ORISKANY NY 13424 DMX DMX CABLES Offered
More informationMG12XU Overview Features Technical Data Sheet
Overview MG12XU is a versatile mixer suitable for a wide range of users and applications. Rear Panel Features Input channels: 12 Line Inputs (4 mono, 4 stereo), 6 Mic Inputs with 48V phantom power and
More informationOmnia VOCO 8. Powerful, networked mic processing for your entire facility.
Omnia VOCO 8 Powerful, networked mic processing for your entire facility. Quick Start Setup Guide For part numbers: 2001-00396-000, 2001-00421-000, 2001-00422-000, 2001-00423-000 ATTENTION! This quick
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS MicroComm DXI. Intent & Scope This document describes the installation procedure for the IMS-30 Intercom Master Station and the MAI-420 or MAI-20 Master Audio Interface. The earliest
More informationPrisma II Platform. Optoelectronics
Optoelectronics Prisma II Platform Description In optical transmission systems, the network platform forms the foundation of the product family. The Prisma II platform provides network operators with the
More informationA360 DESIGN GUIDE. This design reference provides guidance on designing Aviom personal mixing systems with the new A360.
A360 DESIGN GUIDE Aviom s new A360 Personal Mixer brings a number of major advances in personal mixing for performing and recording musicians. For more than a decade, Aviom has set the standard for personal
More informationFlexibility and Expansion. Option Cards, I/O Solutions, and Accessories for Soundcraft Si Series consoles
Flexibility and Expansion Option Cards, I/O Solutions, and Accessories for Soundcraft Si Series consoles Stageboxes COST-EFFECTIVE EXPANSION OPTIONS FOR SOUNDCRAFT DIGITAL MIXING CONSOLES. MINI STAGEBOX
More informationThe cornerstone of Roland's Audio and Visual Solution
The cornerstone of Roland's Audio and Visual Solution Digital Snakes Personal Mixers Digital Consoles Multi-Channel Recording 48 channels / 18 buses / 8 matrices / 56-bit processing www.rolandsystemsgroup.net
More informationInstall AV Catalog. Effective Q Attero Tech, LLC.
Dante Product Group und32 32 Channel Break Out Interface 32 unique output channels from a Dante network Individual volume control on each output (controlled from front panel or via software over the network)
More informationCS2000 Conference systems
CS2000 Conference systems CS2100 Conference and voting system The CS2100 conference system enables automatic management of up to a maximum of 100 stations. All the activities can be managed through a CL2100-G
More informationOBIS LX/LS 6-Laser Remote
OBIS LX/LS 6-Laser Remote Laser Remote and Power Supply for up to Six Lasers OBIS LX and OBIS LS laser products come with a variety of accessories to support your application needs. The for OBIS LS and
More informationPRG LIGHTING SYSTEMS NETWORKING GUIDE
WWW.PRG.COM PRG LIGHTING SYSTEMS NETWORKING GUIDE TLE OF CONTENTS Introduction bout This Guide... 1 PRG Lighting Product Documentation... 1 Components V676 Console... 2 V476 Console... 3 Virtuoso Consoles...
More informationArtistic Licence Price List
Artistic Licence Price List 16-Oct-17 Email: Sales@ArtisticLicence.com Studio 1 Spectrum House, 32-34 Gordon House Rd, London NW5 1LP, UK Tel: +44 (0)20 88 63 45 15 Fax: +44 (0)20 84 26 05 51 Order Code
More informationArtistic Licence Price List
Artistic Licence Price List 09-Jan-19 Email: Sales@ArtisticLicence.com The Mould Making Workshop Soby Mews Bovey Tracey, TQ13 9JG Tel: +44 (0)20 88 63 45 15 Order Code Product Description Price Sterling
More informationFeatures and Benefits. Certifications
EDS-P308 Series 8-port unmanaged Ethernet switches with 4 IEEE 802.3af PoE ports Features and Benefits 4 IEEE 802.3af-compliant PoE and Ethernet combo ports Up to 15.4 W output at 48 VDC per PoE port Intelligent
More informationOverview. Features. Technical Data Sheet 1 / 6. Digital Mixing Console TF1
Overview The intuitive TouchFlow Operation interface is optimized for touchpanel control and provides an easy-to-use digital mixing console environment for a broad spectrum of users and uses. The TF1 Digital
More informationChamSys. Inspiring Performance. SnakeSys range
ChamSys Inspiring Performance SnakeSys range SnakeSys network products enable DMX data, media data and control data to be distributed throughout the lighting rig from control consoles to fixtures. SnakeSys
More informationCVH Slot Media Converter Chassis Quick Installation Guide
CVH-2000 14-Slot Media Converter Chassis Quick Installation Guide Ver. 1.2-1305 Table of Contents 1. INTRODUCTION... 1 1.1. FEATURES... 1 1.2. PACKAGE CONTENTS... 1 2. HARDWARE DESCRIPTION... 2 REAL PANEL...
More informationSoundcraft Studer I/O Rack Systems
SOUNDCRAFT A Division of Harman International Industries Ltd CRANBORNE HOUSE CRANBORNE ROAD POTTERS BAR HERTS EN6 3JN UK Soundcraft Studer I/O Rack Systems Contents Version:... 1 Introduction:... 1 Studer
More informationSTANDALONE INTERFACES USB-DMX 512 & 1024 CHANNELS V.1.1
STANDALONE INTERFACES USB-DMX 512 & 1024 CHANNELS V.1.1 SUMMARY Hardware technical specifications... 3 Front Face of the 512 / 1024 channels interfaces... 4 Side Faces of the 512 / 1024 channels interfaces...
More informationMODEL 801R REMOTE CONTROL MICROPHONE PREAMPLIFIER
OWNERS MANUAL MODEL 801R REMOTE CONTROL MICROPHONE PREAMPLIFIER Software version 1.4 PO Box 204 Boulder, CO 80306 tel:303.443.7454 fax: 303.444.4634 http://www.gracedesign.com Revision B January, 2000
More informationModel 5205 Mic/Line to Dante Interface. User Guide
Mic/Line to Dante Interface User Guide Issue 2, August 2017 This User Guide is applicable for serial numbers M5205-00151 and later with application firmware 2.1 and later and Dante firmware 2.2 (Ultimo
More informationICPDAS FSM-510G Series Ethernet Management Switch Quick Start
ICPDAS FSM-510G Series Ethernet Management Switch Quick Start Version 1.0, Dec 2014 Overview The Management Ethernet Switch solutions are designed for supporting standard industrial applications. Managed
More informationSound-over-Ethernet. User Guide. Linked via Cat5 cable Up to 1000m! 11/09
User Guide Linked via Cat5 cable Up to 1000m! 11/09 Overview SONET4: Cat5 Audio Distribution System - 4 in / 4 out The new so.net System has been designed to simplify and speed up installations where multiple
More informationFSM-510G Series Ethernet Management Switch Quick Start Guide
FSM-510G Series Ethernet Management Switch Quick Start Guide Overview The Management Ethernet Switch solutions are designed for supporting standard industrial applications. Managed switches are easily
More informationApogee Quartet. QuickStart Guide
Apogee Quartet QuickStart Guide V1, September, 2012 Contents Overview! 3 Introduction! 3 Package contents! 4 Quartet panel tour! 5 Display and touchpad tour! 7 Connecting to your Mac! 8 Adjusting Input
More informationEther-Lynx User s Guide
Ether-Lynx User s Guide Artistic Licence (UK) Ltd. Revision V1.6 C O N T E N T S Introduction...4 Overview...4 DMX512 Input...4 DMX512 Output...4 Art-Net Ethernet...5 Device Operation...5 Point to Point...5
More informationUsing the Extron CTL208 with SoundStructure
Using the Extron CTL20 with SoundStructure The Extron CTL20 is an button control pad available from Extron Electronics (www.extron.com) that can be programmed to control the SoundStructure device over
More informationDN9680. I/O Interfaces. 8 Port AES50 Extender and Multiplexer with up to 1000 Metre Range
Multiplexes up to 8 AES50 connections into one optical fibre cable or CAT5 cable Extends AES50 connections up to 1,000 m with optical fibre or 100 m with CAT5 cable High channel capacity with 192 bidirectional
More informationCONTROL TECHNOLOGY INC Middlebrook Pike, Knoxville, TN Phone FAX
, Phone 865.584.0440 Product Family: 2500 Series Programmable Controller System 2500-40F Face 40 Terminal Block 2500P-ACP1 Application Coprocessor 2500-ADP1 Analog Wiring Adapter 2500-ADP2-DISC Discrete
More informationTOA ELECTRIC CO., LTD.
Operating Instruction Manual TOA MIXING CONSOLE Model RX-31C TOA ELECTRIC CO., LTD. KOBE, JAPAN Contents General Description...2 Features...2 Front Panel...3 Rear Panel...4 Rack Mounting Instructions...5
More informationN-8000 SERIES IP INTERCOM SYSTEM
N-8000 SERIES IP INTERCOM SYSTEM Cutting-edge TOA technology for greater versatility and improved sound quality IP Network-Compatible Intercom System with Packet Audio Technology The TOA N-8000 Packet
More informationDigital Mixing System D-2000 Series
Digital Mixing System D-2000 Series Integrating high-performance mixing, matrixing and processing functions to meet a wide scope of sound reinforcement applications Expandable all-in-one designs ideal
More informationStrand Lighting Specification
I. SHOWNET ETHERNET SIGNAL DISTRIBUTION 1. The Strand Lighting ShowNet network shall provide data distribution over a TCP/IP ethernet Network. Systems using proprietary formats or formats other than TCP/IP
More informationFORUM IP. Audio, Video and Communications for Broadcasters. Modular Digital Audio Mixing Console
Audio, Video and Communications for Broadcasters FORUM IP Modular Digital Audio Mixing Console TM With DANTE and AES67 AoIP or AES10 MADI Multichannel connectivity Outstanding Features Compact digital
More informationSocapex. Dedicated Solutions for Entertainment. Amphenol.
Socapex Amphenol Dedicated Solutions for Entertainment www.socapex.com How to order a "Socapex" SOCAPEX 19 pins Black coating - 7 pre-mate earth contacts SL GD EF 419 AR SLX GD EF 419 AR SL D FMD 419 AR
More information5600 Series. 8 and 16-port Serial Device Servers. Features. Internet Readiness for up to 16 Serial Devices
5600 Series 8 and 16-port Features Up to 16 ports supporting RS-22, RS-422, or RS-485 operation Compact desktop model or standard 19-inch rackmount model Auto-detecting 10/100 Mbps Ethernet 15 KV ESD surge
More informationMetropolis ADM MultiService Mux Compact Shelf
Metropolis ADM MultiService Mux Compact Shelf Engineering and Ordering Information Release 5.0 ED8C938-10 Issue 5 13-May-2005 AN55 Copyright 2005 Lucent Technologies All Rights Reserved A A About This
More informationIC-I AND IC-I F GENERAL DESCRIPTION SPECIFICATIONS. Output Impedance: Phones: 60 ohms (Unit is designed for use with ohm phones.
IC-I AND IC-I F GENERAL DESCRIPTION The IC-1 and IC-1 F are single-channel, singleline intercom stations designed for use with dynamic headsets. The IC-1 is a compact, lightweight unit which may be worn
More informationPIX 535. PIX 535 Product Overview CHAPTER
CHAPTER 7 PIX 535 This chapter describes the installation of the PIX 535, and includes the following sections: PIX 535 Product Overview Installing a PIX 535 PIX 535 Feature Licenses Installing Failover
More informationTACTICAL FIBER OPTIC MODEMS U.S. Army and ANSI Standards
This data sheet contains controlled technical data that has been cleared for public release by the U.S. Government under ITAR Exemption 22CFR 125.4(b)(13). TACTICAL FIBER OPTIC MODEMS U.S. Army and ANSI
More informationCompact Mixing Console 52/SX. Digital Broadcast Technology
Series 5 Compact Mixing Console 5/SX www.dhd-audio.com Digital Broadcast Technology 5/SX Features Input page Equalizer page Dynamics page Main page PPMs, clock, stopwatch, phase metering Snapshots page
More informationirbx6gf Features Intelligent 6 Port HSR/PRP Ethernet Switch IEC and IEEE 1613 Compliant
irbx6gf www.is5com.com Intelligent 6 Port HSR/PRP Ethernet Switch IEC 61850 and IEEE 1613 Compliant Features Fully compliant with IEC 62439-3 HSR High-availability Seamless Redundancy Supports 4 x 10/100/1000Base-T(X)
More informationModel 903 Multiplexer Product Guide
Model 903 Multiplexer Product Guide The Focal Model 903 product family provides a rugged video/data multiplexer and fiber optic communication system for Remotely Operated Vehicles (ROVs) and other industrial
More informationPRG SERIES 400 POWER & DATA DISTRIBUTION SYSTEM
SOFTWARE VERSION 5.0 WWW.PRG.COM PRG SERIES 400 POWER & DATA DISTRIBUTION SYSTEM USER MANUAL AutoPar, Bad Boy, Best Boy, Followspot Controller, Mbox, Mini Node, Nocturne, Series 400, ReNEW, Super Node,
More informationOMEGA MODULAR PATCH PANEL EMPTY ENCLOSURE
OMEGA MODULAR PATCH PANEL EMPTY ENCLOSURE The Omega MPP enclosure is based on a 19" frame, with 4 empty module slots for MPP modules. Highly flexible : any mix between twisted pair and optical fiber modules.
More informationPHB-200M PHB x 100/1000Base-T to 20x100/1000Base-X SFP Patching Hub
SFP Patching Hub PHB-200M PHB-200 20x 100/1000Base-T to 20x100/1000Base-X SFP Patching Hub PHB-200M is a 20-channel Managed SFP patching hub that converts copper 100/1000Base-TX to SFPs working at 100Mbps
More informationFO Trunk Cable. FO Trunk Cable
5 FO Trunk Cable www.easylan.de FO Trunk Cable u 2 to 144 fibers u Various cable types u PC and APC polish u Tuned connectors u Gradations as desired u Up to IP67 u etc. 104 05 FO Trunk Cable Contents
More informationProduct Overview CHAPTER
CHAPTER 1 Product Overview The CDDI/FDDI C1400 Concentrator is a member of a family of concentrators that provide Copper Distributed Data Interface/multilevel transmission (CDDI/MLT-3) and single and multimode
More informationV3.1 Supplementary Manual
This supplementary manual explains mainly the functions that have been added or changed in QL5/QL1 firmware V3.1. Use it in conjunction with the QL5/QL1 V3 Owner's Manual and Reference Manual. EN Contents
More informationLoop-O9330 Fiber Optical Mux
Loop-O9330 Fiber Optical Mux Features Up to 16 E1 links and one 100Mbps ethernet link on one fiber Auto Laser Shutdown function is user configurable Supports 10/100M Ethernet Bridge plug-in card (Optional)
More informationCommercial Audio Newsletter touring solutions. The complete package
Commercial Audio Newsletter touring solutions The complete package Expandability Yamaha touring solutions is not a mixer-stagerack connection system. Although there are many reasons to consider a Yamaha
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS MicroComm DXI MAI-425 Master Audio Interface. Intent & Scope This document describes the installation procedure for the MAI-425 Master Audio Interface. The earliest version of
More information