JULIET JTAG Unlimited Tester Product Overview

Transcription

1 Product Overview Complete JTAG / Boundary Scan Tester in a desktop system for prototyping and production with integrated system electronics Exchangeable adaptor for the easy use of probes or real connectors Controlled by external PC or laptop via USB 2.0 or LAN Allows the execution of Boundary Scan Tests, In-System Programming of Flash / PLD / MCU, and functional emulation tests (VarioTAP ) JULIET is a professional JTAG / Boundary Scan Tester suitable for production. It combines the complete system electronics together with the adaptation of the UUT via an exchangeable adaptor in a compact system. The JULIET testers are based on standard components like SYSTEM CASCON, ScanBooster, and SCANFLEX, hence they are compatible to systems already used in development, and flexibly upgradable. A total of six different JULIET versions cover all possible production applications, from simple test execution to complete repair station with graphical failure visualisation, and make the system ideal for fast prototyping and low volume production.

2 JTAG/Boundary Scan JULIET JTAG Unlimited Tester The JULIET Concept Board clamp Exchangeable adaptor Control elements Basic housing JULIET was developed primarily for test and programming of JTAG/Boundary Scan boards in prototyping and small batches in production. The compact device consists of the following components: Exchangeable adaptor with a maximum of 600 pins (UUT adaptation) Board clamp allows a maximum of 300 pins from top Control elements for system control All-purpose basic device with integrated test electronics external control PC (not included) Base Standard UUT voltage JULIET version Banks/gang test 2/- / Digital I/O channels Programmable VIO 1.8/2.5/3.3 V 1.8/2.5/3.3 V Analog I/O channels 16,8 32/ Opto I/O channels RS232/RS85 interface TCK (max.) TAPs Control interface 8/ 50 MHz 2 USB 2.0 USB 2.0/LAN Controller architecture SCANBOOSTER SCANFLEX Software architecture SYSTEM CASCON SYSTEM CASCON ext. I/O ext. I/O & SFX-I/O Upgradeability Graphical development tools in SYSTEM CASCON /2 16 MHz Optical pass/fail display for the test results Acknowledgment keys for interactive test processes Active UUT display Start/stop buttons Versatile Applications The integrated hardware and software enable versatile applications: UUT current draw verification Test of I/O connectors, DIMM sockets, IEEE peripherals, bus interfaces and nonscannable formwork components Source and measurement of analog voltage Programming of high-speed Flash, PLDs and MCUs Processor Emulation Test (VarioTAP)* Chip-Embedded Instrumentation (ChipVORX)* Custom dynamic IP based tests* *available only in Standard version Status display and interactive control panel Simple access to pin signals while debugging VarioTAP or ChipVORX utilization requires corresponding IP models. Assembly Integration Following options are available for seamless production process integration: Integration into Manufacturing Execution Systems (MES) Complete adaptation (fixtures and test programs) Custom GUI development Integration of external devices into the testing process Upgrade with additional system options Link to repair systems and data servers Pin fault report (JULIET Failure Diagnostics System) Fault location display (JULIET Repair Diagnostics System) Software extension as development station Example of a custom exchangeable adaptor Autorisierter Distributor: GÖPEL electronic GmbH Göschwitzer Straße 58 / 60 D Jena Tel.: Fax: sales@goepel.com ISO 9001 zertifiziert BST-J-F / E / Web: sales@goepel.co.uk sales@goepelusa.com sales@goepel.asia sales@goepel.fr sales@goepel.in

3 Product Overview: JULIET Systems Product Description PN JULIET-Base/RTS JULIET-Base/FDS JULIET-Base/DRS JULIET-Standard/RTS JULIET-Standard/FDS JULIET-Standard/DRS as Run Time Station (USB 2.0 controlled) incl. 96 digital I/Os, 16 channels analog in, 8 channels analog out, x RS232 interface, 2 x RS85 interface, 8 channel opto I/O, 2 TAPs, 16 MHz TCK (max.), as Failure Diagnostics Station (USB 2.0 controlled) incl. 96 digital I/Os, 16 channels analog in, 8 channels analog out, x RS232 interface, 2 x RS85 interface, 8 channel opto I/O, 2 TAPs, 16 MHz TCK (max.), all pin failure diagnostics processors (PFD) as Debug and Repair Station (USB 2.0 controlled) incl. 96 digital I/Os, 16 channels analog in, 8 channels analog out, x RS232 interface, 2 x RS85 interface, 8 channel opto I/O, 2 TAPs, 16 MHz TCK (max.), all pin failure diagnostics processors (PFD) all ScanAssist tools ScanVision Layout as Run Time Station (USB 2.0 or LAN controlled) incl. CASCON GALAXY-TS/Run Time Edition as Failure Diagnostics Station (USB 2.0 or LAN controlled) incl. CASCON GALAXY-TS/Failure Diagnostics Edition as Debug and Repair Station (USB 2.0 or LAN controlled) incl. CASCON GALAXY-TS/Debug and Repair Edition (with all ScanAssist Tools and ScanVision Layout) JLT-010 JLT-011 JLT-012 JLT-020 JLT-021 JLT-022

4 Product Overview: JULIET System Options Product Description PN Bare cassette Bare Exchange Cassette without nails, wires, spacers (UUT moving plate), pilot bolts and push fingers ready for UUT adaptation incl. upper push down plate (plexi-glass) JLT-000 Proto cassette Special Exchange Cassette with SFX/Board Grabber-L (P/N SUF-010) on top for connecting prototypes for probes or via edge connectors enables access to all tester signals (TAP channels, I/O channels, power supply channels) BG/Access Kit/5-(x) or BG/Access Kit/10-(x) necessary (not included) JLT-002 Self-test adaptor Standard Exchange Cassette for Self-Test of all JULIET Resources incl. JULIET fixture container JLT-00 Universal cassette Standard Exchange Cassette with Connectors to Access all JULIET Resources incl. JULIET fixture container JLT-005 Cover lift Pneumatically Operated Cover Opener enables automatic lift of the cover after end of test procedure controlled by system software option needs to be ordered together with the JULIET system later upgrade not possible JLT-100 Cover lock Label printer Pneumatically Operated Pin Mechanics for cover locking during the active test procedure locking mechanics controlled by system software or manually protects the system against damages due to cover release while in active test state option needs to be ordered together with the JULIET system later upgrade not possible USB Controlled Label Printer directly connectable to the rear site of JULIET JLT-101 JLT-006 Bar code reader USB Controlled Bar Code Reader directly connectable to the rear site of JULIET JLT-003 Fixture container Universal Transport Container and storage enclosure for JULIET test fixtures incl. top cover with locking hooks, sticker case, internal ESD body and additional shift lock 600 mm x 00 mm x 236 mm JLT-007 Wear parts kit Collection of Wear Parts for JULIET incl. 50 x spring probe for signals, 20 x FM spring probe for power, spring hinge left, spring hinge right, gas spring 50 mm (lift 100 N) JLT-008 Repair box Complete Tool Box incl. spare parts (CION Module/FXT8), wear parts (50 x spring probe for signals, 20 x FM spring probe for power, spring hinge left, spring hinge right, gas spring 50 mm (lift 100 N)) and a full set of assembly tools JLT-009 Machine Maintenance Contract (MMC) One Year Machine Support Contract mandatory for first year incl. software maintenance contract (SMC) and advanced hardware maintenance with fast repair/exchange service (8 h) and full application support JLT-MMC

5 Additional Information We offer additional literature for the following topics: Embedded System Access (ESA) JTAG/Boundary Scan Application JTAG/Boundary Scan Software JTAG/Boundary Scan Hardware JTAG/Boundary Scan Integration Special background information, as technology introduction, is available for the following processes and methods: Boundary Scan (IEEE119.x) ChipVORX (Chip Embedded Instruments) VarioTAP (Processor Emulation Test) In addition, our product portfolio for beginners and advanced users includes entire hardware/software bundles as complete solutions for JTAG/Boundary Scan. PicoTAP Designer Studio SCANBOOSTER Designer Studio SCANFLEX Designer Studio