HDL KNX/EIB Koduautomaatika Hinnakiri 2015
|
|
- Joella Stanley
- 5 years ago
- Views:
Transcription
1 HDL KNX/EIB Koduautomaatika Hinnakiri 0 (A) Lighting & Dimming Control Modules Jan 0 S/N Picture Brief Description Model Number BUS Power Dimension (mm) CH 6A High Power Switch Actuator,DIN-Rail Mount,0VAC (0/60Hz) 6A per Channel, fully HDL-M/R.6. ma 7*90*66 8CH 6A High Power Switch Actuator,DIN-Rail Mount,0VAC (0/60Hz) 6A per Channel, fully HDL-M/R8.6. ma *90*66 99 CH 6A High Power Switch Actuator,DIN-Rail Mount,0VAC (0/60Hz) 6A per Channel, fully HDL-M/R.6. ma 6*90*66 6CH 6A High Power Switch Actuator,DIN-Rail Mount, 0VAC (0/60Hz) 6A per Channel, fully HDL-M/R6.6. ma 88*90*66 90 CH 0A High Power Switch Actuator, DIN-Rail Mount,0VAC (0/60Hz) 0A per Channel, fully HDL-M/R.0. ma 7*90* CH 0A High Power Switch Actuator, DIN-Rail Mount,0VAC (0/60Hz) 0A per Channel, fully HDL-M/R8.0. ma *90*66 7 CH 0A High Power Switch Actuator, DIN-Rail Mount,0VAC (0/60Hz) 0A per Channel, fully HDL-M/R.0. ma 6*90*66 8 6CH 0A High Power Switch Actuator, DIN-Rail Mount,0VAC (0/60Hz) 0A per Channel, fully HDL-M/R6.0. ma 88*90* CH 6A LE and TE Dimming Actuator, DIN-Rail Mount,0V/0V AC (0/60Hz) Leading edge and Trailing Edge Technology Dimmers complying with European safety standards and KNX association protocol. Short circuit protection, over load protection,over Heat protection HDL-M/D0. ma *90* CH A LE and TE Dimming Actuator, DIN-Rail Mount,0V/0V AC (0/60Hz) Leading edge and Trailing Edge Technology Dimmers complying with European safety standards and KNX association protocol. Short circuit protection, over load protection,over Heat protection HDL-M/D0. ma 6*90*66 7
2 S/N Picture Brief Description Model Number BUS Power Dimension (mm) 6CH A LE and TE Dimming Actuator, DIN-Rail Mount,0V/0V AC (0/60Hz) Leading edge and Trailing Edge Technology Dimmers complying with European safety standards and KNX association protocol. Short circuit protection, over load protection,over Heat protection HDL-M/D06. ma 6*90*66 0 CH 6A Leading Edge Dimming Actuator, DIN-Rail Mount,0V/0VAC (0/60Hz) channel 6A per Channel, Overheat and overload protection, fuse for each channel on the top of module HDL-M/DL0. ma *90*66 0 CH A Leading Edge Dimming Actuator, DIN-Rail Mount,0V/0VAC (0/60Hz) channel A per Channel, Overheat and overload protection, fuse for each channel on the top of module HDL-M/DL0. ma *90* CH A Leading Edge Dimming Actuator, DIN-Rail Mount,0V/0VAC (0/60Hz) 6channel A per Channel, Overheat and overload protection, fuse for each channel on the top of module HDL-M/DL06. ma *90* DALI Master Actuator, can connect up to 6 DALI devices for address assignment and management.also can be real-time to detect the device fault, such as DALI fault,lamp fault,ballast fault. for each channel and group, support Switch ON/OFF,Relative dimming, Absolute dimming,bit and byte statues response function. 6Channel 0A Ballast Dimming Actuator, DIN-Rail Mount,0-0VAC(0/60Hz), 6channel 0A, the output of MAX 0A be switched on and off on each output channel, also can be manually switch, control types include both input and output, so absorption and output type ballast can be connected to this module HDL-M/DALI. ma 7*90*66 60 HDL-M/DA6.0. ma *90*66 70 (B) Motorizated Modules / HVAC Modules Channel 0A Curtain Actuator: DIN-Rail Mount,0V/0VAC(0/60Hz) channel 0A per Channel, fully abide by europe safety standandard for the internal use of 0A high current magnetic, Relay inside HDL-M/W0.0. ma 7*90*66 Channel 0A Curtain Actuator: DIN-Rail Mount,0V/0VAC(0/60Hz) channel 0A per Channel, fully abide by europe safety standandard for the internal use of 0A high current magnetic, 8 Relay inside HDL-M/W0.0. ma *90* Channel 0A Curtain Actuator: DIN-Rail Mount,0V/0VAC(0/60Hz) 6channel 0A per Channel, fully abide by europe safety standandard for the internal use of 0A high current magnetic, Relay inside HDL-M/W06.0. ma 6*90*66 9 FCU Actuator, DIN-Rail Mount,0VAC(0/60Hz) channel 0A Relay output, channels 0-0V output, High, Medium and Low Fan speed, Comfortable, Standby, Night, Frost/Heat protection mode, 7 independent channel for floor heating control HDL-M/FCU0.0. 0mA 7*90*66. Meter Digital Thermometer for Floor Heating Module, one wire bus for all of sensor, simple installation, metal shell with epoxy resin packaging protect sensor, allow to be putted to any of application for measure temperature TS/C.0 / 7,
3 (C) User Interface Bus Power S/N Picture Brief Description Model Number Dimension (mm) Consumpti DLP Series Panel Smart DLP Wall Panel EU, with LCD, IR Receiver(Optional), Temp. sensor, Support 7 languages, 6 pages to control as needed: three Pages for Lighting and Swtich, one page for AC, one page for HVAC and the last for Floor Heating(PID control for heating), Could work with M/IRAC. for IR Control, and work with M/FCU0. For HAVC and Floor Heating control HDL-M/DLP0.-8 7mA 86*86*0 70 iflex Series Panel iflex Series Folder Smart Wall Panel EU,with LED Back lighting, and Engraving HDL-M/P0.-8 0mA 86*86*0 9 iflex Series Folder Smart Wall Panel EU,with LED Back lighting, and Engraving HDL-M/P0.-8 0mA 86*86*0 0 iflex Series Folder Smart Wall Panel EU,with LED Back lighting, and Engraving HDL-M/P0.-8 0mA 86*86*0 iflex Series Folder Smart Wall Panel EU,with LED Back lighting, and Engraving HDL-M/P0.-8 0mA 86*86*0 0 itouch Series Panel itouch Series Button Smart Touch Panel EU, with LED Back lighting(rgb Color HDL-M/TBP.-8 ma 86*86*0 8 itouch Series Button Smart Touch Panel EU, with LED Back lighting(rgb Color HDL-M/TBP.-8 ma 86*86*0 9 itouch Series Button Smart Touch Panel EU, with LED Back lighting(rgb Color HDL-M/TBP.-8 ma 86*86*0 0 itouch Series Button Smart Touch Panel EU, with LED Back lighting(rgb Color HDL-M/TBP.-8 ma 86*86*0 ialluminium Series Panel ialluminium Series Button Smart Wall Panel, with LED Back lighting, and Engraving, Auto Lock Option function, IR Remote Control, Toggle, Dim, and double click macro function. (Standard Plate is aluminum but optional ) HDL-M/P0. 0mA 7*0*9
4 ialluminium Series Button Smart Wall Panel, with LED Back lighting, and Engraving, Auto Lock Option function, IR Remote Control, Toggle, Dim, and double click macro function. (Standard Plate is aluminum but optional ) HDL-M/P0. 0mA 7*0*9 ialluminium Series 8 Button Smart Wall Panel, with LED Back lighting, and Engraving, Auto Lock Option function, IR Remote Control, Toggle, Dim, and double click macro function. (Standard Plate is aluminum but optional ) HDL-M/P0. 0mA 7*0*9 7 Panel Power Interface and Accessories Panel Power Interface EU, Univeral for DLP Series, iflex Series,iTouch Series and HDL-MSPU0.8 Wall Mount Ultrasonic & PIR Sensor HDL-M/PCI. 0mA 86*86*0 6 Panel Power Interface for ialluminium Series HDL-M/PCI. 0mA 7*0*0 6 HDL Metal Facial Plate for New Gerneration Keypad, for new DLP, button Keypad HDL Metal Facial Plate / 86*86*0. HDL Glass Facial Plate for New Gerneration Keypad, for new DLP, button Keypad and Touch Panel HDL Glass Facial Plate / 86*86*0. 6 HDL Protection Plate, for new DLP, button Keypad and Touch Panel HDL Protection Plate / 86*86*6. ichrome Series Panel Bigger Button Smart Wall Panel EU, For Lighting Control, Curtain Control, support bit, four bit, one byte, two byte, four byte control, etc.built-in mini infrared receiver HDL-M/P0.-8 0mA 86*86* 7 Bigger Button Smart Wall Panel EU, For Lighting Control, Curtain Control, support bit, four bit, one byte, two byte, four byte control, etc.built-in mini infrared receiver HDL-M/P0.-8 0mA 86*86* 90 (D) Sensor S/N Bus Power Picture Brief Description Model Number Dimension (mm) Consumpti Ceiling Mount Motion and Lux Sensor, includes independent logic blocks and combined logic block. The logic condition can be AND OR logic input conditions can be the condition of motion sensor, Lux, external conditions. According to different application requirements, the sensor can be configured as the master-slave mode or single mode HDL-M/IS0. 0mA 6*6*8 Ceiling Mount Ultrasonic Sensor, includes independent logic blocks and combined logic block. The logic condition can be AND OR logic input conditions, can be the condition of ultrasonic sensor, Lux, external conditions.according to different application requirements, the sensor can be configured as the master-slave mode or single mode. HDL-M/US0. 0mA 6*6*8 0
5 Motion and LUX Sensor Embedded with function of Temperature detecting, LUX detecting, Master & Slave control, Logic control etc. It has the function for sending of variety data points, can be used to control many different types of KNX devices. HDL-M/HS0.-B 0mA 80*80*8 Wall Mount Ultrasonic & Infrared Motion sensor, Embedded with function of with Ultrasonic Sensor, temperature Sensor, LUX and PIR, integrated with Logic,Have to work with HDL-MPCI. HDL-M/HSIU0. ma 86*86* 0 (E) Power Supply 960mA Power Supply Module, DIN-Rail Mount 0-0VAC(0/60Hz) fully compliant with europe safety standandard and protocol, can output maximum 960mA Current to EIB BUS, Overload and Short-Circuit Protection, with Reset Button HDL--M/P960. / *90*66 0 (F) Dry Contact and IR Emitter Zone Dry Contact Module, it includes a channel signal input and a channel signal output, the input channel can receive the signal from the temperature sensor and from dry contact sensor, it offers an output DC0-0V dimming signal or drive the LED status channel HDL-M/S0. ma 9** 0 8 Zone Dry Contact Module, With dry contact input, it has work modes: sensors controller and logical controller. HDL-M/S08. ma 9** 7 Zone Dry Contact Module, it includes a channel signal input,dry contact type can be set Mechanical switch or Electronic switch. HDL-M/S. 6mA 7*90*6 7. Meter Temperature Probe, Analog sensor, work with HDL-M/S0. Zone Dry Contact Module for temperature collection TTS/APR.0 / / Infrared Emitter, Supports channel infrared interfaces, totally can store up to 60 infrared codes, The control modes are ON/OFF control, Temperature control, Cooling/Heating, Fan speed control, Swing control etc. HDL-M/IRAC. ma 9** 6 Infrared Emission Probe, to work with HDL-M/IRAC. Infrared Emitter Infrared Emission Probe / 7 Infrared Code Learner, USB Pluggable, IR learning/ Programming Kit. Comes with Software driver, for Pro installers and Integrators SB-IR-Learn.0 / 98*70*8 (G) System Interface/Converter HDL KNX IP Rounter, It can be used as line or backbone coupler and provides a data connection between the upper KNX net/ip line (main line or backbone) and the lower TP KNX bus line (sub line). It also provides with the tunnelling protocol a connection point for ETS to enable commissioning and monitoring. HDL-M/IPRT. 90mA 70*90*6 66
6 HDL KNX USB Interface, DIN-Rail Mount, with USB Conector galvanically isolated from KNX Bus that establish a bidirectional data connection between PC and KNX BUS, Enable addressing, setting parameters, visualzation, protocolin and diagnoisis of the bus devices, HDL-M/USB. 0mA 70*90*6 0 HDL KNX Line Coupler, DIN-Rail Mount, to be used as coupler and Repeater(to amplify the signal), if as a line coupler, it can be linked with other line or backbone line, a separate power supply include a choke is required for each new line and each line will be electrically isolated, the line coupler can filter telegrams and permit pass or black them to other adjaccent lines HDL-M/LCR. 0mA 70*90*6 9 KNX-EIB and HDL-BUS Interface Converter, DIN-Rail Mount, BUS Enabled, -way Bridge Converter, to Give full -way communication and make HDL-BUS as Family Member within the KNX-EIB Environment SB-DN-EIB ma 7*90*66 9 DMX Recorder Module, DIN-Rail Mount, Input signal: DMX, HDL NET DMX, ArtNet DMX, Output Singal: DMX, HDL NET DMX, ArtNet DMX, This module can be used for control devices built in DMX Protocol such as LED Color changer, Move head and Laser Light HDL-M/DMX. ma 7*90* Master/Slave Timer Controller This timer controller is embedded with RTC, can run real time itself, can used as master timer and slave timer. HDL-M/TM0. 0mA *90*66 0 (H) KNX Cable KNX/EIB and HDL-BUS Cable, cores(red,black,white,yellow),aluminum foil shielding,ground line, Copper wire diameter:0.8mm, Twisted pair: x Twisted pair(red and black,white and yellow), 00meter each reel HD-Cable / / 7 6
GeniusHome.co. A- Relay Switch Controller (Light, Motor, FCU) S/N Picture Brief Description User ($) A2 Relay 12ch 10A with FCU function 286
A- Relay Switch Controller (Light, Motor, FCU) S/N Picture Brief Description User ($) Relay 8ch 16A witch mechanical latching A1 267 green relay A2 Relay 12ch 10A with FCU function 286 A3 RCU 8 Relay switch
More informationVIVATEQ Export Price List EPL effective
Content KNX Switch and Dimming Actuators Page 2 KNX Motorizated Module / HVAC Modules Page 4 KNX Dry Contact and IR Emitter Page 5 KNX Sensors Page 6 KNX DLP Series Panels Page 7 KNX iflex Series Panels
More informationColour Touch Panel 3.5
Guangzhou Video-star Electronics Industrial Co., Ltd K-BUS R Colour Touch Panel 3.5 User manual-ver. 1.2 CHTF-35/01.1 CHTF-35/01.2.21 CHTF-35/01.2.22 CHTF-35/01.2.24 KNX/EIB Intelligent Installation Systems
More informationeelecta & new products
eelecta & new products Home and Building Evolution Eelectron - Via Magenta 77/22, I-20017 Rho (MI), Italy Eric Ducros eric.ducros@eelectron.com +39 02.9316681 www.eelectron.com info@eelectron.com www.eelectron.com
More informationOperating Instructions. DALI-Gateway
Operating Instructions 1. Safety instructions Electrical equipment must be installed and fitted by qualified electricians only. Failure to observe the instructions may cause damage to the device and result
More information1 Safety instructions. 2 Device components. 3 Function. IC00P01DAL - DALI gateway. DALI gateway. Operating instructions
DALI gateway Operating instructions 1 Safety instructions Electrical equipment may only be installed and fitted by electrically skilled persons. Serious injuries, fire or property damage possible. Please
More informationControl unit for lux control, MDRC Type: SL/S 50.1, GH Q R0001
SK 0012 B 98 The control unit is a DIN rail mounted device for insertion in the distribution board. It is used to control digitally dimmable electronic ballast devices or transformers via the EIB. In a
More informationLighting control for commercial buildings
[ INTELLIGENT SOLUTIONS ] Products and systems Lighting control for commercial buildings For management of different functions in a simultaneous and integrated way, via a BUS line Cost saving thanks to
More informationTebis application software
5 Tebis application software SXB322AU V 1.x 2 inputs / 2-output module LED SXB344AU V 1.x 4 inputs / 4-output module LED Product reference Product designation TXB322AU TXB344AU Embedded module: 2 inputs
More information4 CHANNEL UNIVERSAL DIMMING ACTUATOR
4 CHANNEL UNIVERSAL DIMMING ACTUATOR USER MANUAL Tel.: 943627988 E-mail: knx@dinuy.com Web: www.dinuy.com General Description - 4 Channel universal modular dimming actuator for leading and trailing edge
More informationINTRODUCTION Busch-SmartTouch KNX. The 7 SmartTouch
INTRODUCTION The 7 SmartTouch Motivation and objectives - your smart display for the smart buildings of today. A smart display with many integrated applications for smart buildings, like KNX controls and
More informationElectrical devices may only be mounted and connected by electrically skilled persons.
DALI gateway TW Art. No. : 2099REGHE Operating instructions 1 Safety instructions Electrical devices may only be mounted and connected by electrically skilled persons. Serious injuries, fire or property
More informationSemi flush-mounted room temperature controllers with LCD
s 3 077 RDD310 RDE410 Semi flush-mounted room temperature controllers with LCD For heating systems RDD310 RDE410 RDD310 and RDE410 features: Operating voltage AC 230 V 2-position control with On / Off
More informationRVL470. Heating controller. G2522en. Installation Instructions. 1 Installation. 2 Commissioning Wall mounting DIN rail mounting
G2522en Heating controller Installation Instructions RVL470 1 Installation 1.1 Place of installation In a dry room, e.g. the boiler room Mounting choices: In a control panel (on the inner wall or on a
More informationRXM39.1. PL-Link IO Block. Desigo TRA. Use with PXC3 series room automation station
s 3 836 3836P01 Desigo TRA PL-Link IO Block Use with PXC3 series room automation station RXM39.1 The PL-Link IO Block contains the inputs and outputs controlled by a room automation station via PL-Link.
More informationThe output variables can be force-controlled from a coordinating control system.
Produktname: 4-channel analog actuator Bauform: rail-mounted device Artikel-Nr.: 1022 00 ETS-Suchpfad: Gira Giersiepen / Output / Analog output 4fach / Analog actuator 4fach Scope of application: The analog
More informationProduct and functional description
Product and functional description Connection example The universal dimmer main module N 528/31 is an installation device for DIN-rail mounting, with N-system dimensions. It is designed for lighting control,
More informationInstallation and User Guide
D5 Installation and User Guide 8-Channel DALI Controller (478) Introduction The 478 is for controlling DALI ballasts, drivers and load interface units (except for the 490 Blinds Controller). Do not connect
More informationSemi flush-mounted room temperature controllers with LCD
s 3 077 RDD310 RDE410 Semi flush-mounted room temperature controllers with LCD For heating systems RDD310 RDE410 RDD310 and RDE410 features: Operating voltage AC 230 V 2-position control with On / Off
More informationSemi Flush-mount Room Temperature Controllers with LCD
3 076 RDF300, RDF300.02, RDF340 RDF400.01 Semi Flush-mount Room Temperature Controllers with LCD for 2-pipe, 2-pipe with el. heater and 4-pipe fan coil units for use with compressors in DX type equipment
More informationChorus Home Automation KNX - Easy BUS
Chorus KNX - Easy BUS KNX Easy protocol BUS system, according to EN50090 European Standard for Home Automation. Simplified programming that does not require a PC. Portable solution, thanks to the wireless
More informationSMARTHOME BUS THE BEST CHOICE FOR HOME AUTOMATION
1 SMARTHOME BUS THE BEST CHOICE FOR HOME AUTOMATION CONTENTS 2 Introduction to SmartGroup What is S-bus? Smarthome solutions Lighting control HVAC control Control Panels IR remote control Sensors Smart
More informationYou, in an homy and environmental world
You, in an homy and environmental world www.eelectron.com Building and Home Evolution 24/03/11 1 What s this? www.eelectron.com Building and Home Evolution 24/03/11 2 NOT A SWITCH You, in an homy and environmental
More information1-channel shutter actuator 6A UP Installation Instructions
2-channel switching actuator 6A UP 1-chan. universal dimming actuator 210 W 1-channel switching actuator 16A UP Order no.: 1047 00 Order no.: 1057 00 Order no.: 1058 00 Order no.: 1059 00 System rmation
More informationEIB/KNX ENO Radio bus interface (32-channel)
EIB/KNX ENO Radio bus interface (32-channel) Interface between EnOcean and EIB/KNX, on-wall mounting (Quelle: EIBMARKT GmbH, Reference No.: N000406) Page 1 Application EIB/KNX ENO Radio bus interface acts
More informationSmart Home BUS (S-BUS) Home Automation System Simplified Specification Prepared By SMART-GROUP Inc. R&D Department USA - July
Smart Home BUS (S-BUS) Home Automation System Simplified Specification 2011-2012 Prepared By SMART-GROUP Inc. R&D Department USA - July - 2011 1 I- Introduction: This Document is constructed to assist
More informationApplication description
Manufacturer Berker Motion detector Application description KNX motion detector module comfort 1.10m KNX motion detector module comfort 2.20m ETS KNX motion detector module comfort 1.10m ETS KNX motion
More informationLine Coupler, MDRC LK/S 3.1, GH Q R0001
, GH Q605 0067 000 The coupler can be used as a line The coupler is installed in the distribution board on the data rail of the coupler or a backbone coupler. CDC 07 0 F000 As a line coupler, it links
More informationABB i-bus KNX DALI Light Controller, 8-fold, MDRC DLR/S M, 2CDG110101R0011
Technical data 2CDC507101D0202 ABB i-bus KNX Product description The ABB i-bus KNX DALI Light Controller DLR/S 8.16.1M is a KNX modular installation device (MDRC) in ProM design for installation in the
More informationSWISS GARDE 360 HOKUSPOKUS KNX/KLR APPLICATION DESCRIPTION
SWISS GARDE 360 HOKUSPOKUS KNX/KLR APPLICATION DESCRIPTION MODEL TYPE NO. SG HOKUSPOKUS KNX/KLR 25010 Program version 2.7 2012 M. Züblin AG Neue Winterthurerstrasse 30, 8304 Wallisellen, Switzerland The
More informationIntesisBox KNX - AIRZONE
IntesisBox KNX - AIRZONE Gateway for the integration of Airzone InnoBUS into KNX systems. Full integration of Airzone InnoBUS air conditioning with KNX control systems. CS CS KNX EIB Bus IntesisBox RS485
More informationRCF-230CAD. Communicating room controller for fan-coil applications with two analogue V DC outputs
revision 01 2015 RCF-230CAD Communicating room controller for fan-coil applications with two analogue 0...10 V DC outputs RCF-230CAD intended to control heating and/or cooling in 2- or 4-pipe installations.
More informationTemperature controller Ducted systems
2 725 Temperature controller Ducted systems Standard model without zoning functions RRV851 Multifunctional controller used for central control of ducted HVAC systems in combination with a QAX850 master
More informationKNX DALI Gateway Plus - User Manual
KNX DALI Gateway Plus - User Manual Item No.: LC-013-064 1. Product Description The KNX DALI gateway Plus is the interface between the KNX installation and the DALI lighting system. It allows up to 64
More informationFANCOIL CONTROLLER UNIT TC17B01KNX. Product Handbook
FANCOIL CONTROLLER UNIT TC17B01KNX Product Handbook Product: TC17B01KNX Description: FANCOIL CONTROLLER UNIT Document Version: 1.2 Date: 09/09/2016 1/37 INDEX 1. General Introduction... 4 2. Product and
More informationControl4 DIN Rail Lighting
Control4 DIN Rail Lighting Life s Better When Everything Works Together Want to change the moods and atmosphere in each room of the house? Using conventional lights, energy saving lights, LEDs and want
More informationGVS K-BUS R KNX/EIB Push Button Sensor Contents 1. Summary
Guangzhou Video-star Electronics Industrial Co., Ltd K-BUS R Push Button Sensor User manual-ver. 1.1 CHKP-01/01.1.xx CHKP-02/01.1.xx CHKP-03/01.1.xx KNX/EIB Intelligent Installation Systems GVS K-BUS R
More informationKNX function and configuration
2 KNX function and configuration Introduction A presence detector monitors the detection zone for occupancy, and causes one or more actions to be executed when a person enters the detection area. In their
More informationapplication sheet RAKO CONTROLS WIRED RAK OVERVIEW
WDA-600 application sheet Introduction When installing a wired system dimmers are typically housed in RAK boxes with either 8 modular cards (RAK8) or 4 fixed type controls (RAK4). These are typically mounted
More informationGlass sensors 35. Supplementary products 39
Understatement is an art, and the makes it perfect. Up to eight functions are concealed under a pure surface that is practically flush with the wall, and can be custom-labelled on request. A single touch
More informationPRODUCTS: CONTROLLERS
PRODUCTS: CONTROLLERS 2009/US Impact Lighting Inc. All rights reserved. Impact Lighting Inc. Reserves the right to change specifications without notice. 118 CONTROLLERS 2 BUTTON MODE CHANGING RGB CONTROLLER
More informationOperating and mounting instructions
General Usage IPAS DALI Gateways bring together the crossfunctional KNX installation bus and the lighting control specific DALI-Bus (IEC 60929). Lights with cost-effective, digital DALI ECGs can therefore
More informationRCF-230CD. Communicating room thermostat for fan-coil applications with on/off outputs
revision 11 2013 RCF-230CD Communicating room thermostat for fan-coil applications with on/off outputs RCF-230CD intended to control heating and/or cooling in 2- or 4-pipe installations. Setpoint and fan
More informationDALI Professional Controller-4. Control unit Operating instructions
LI Professional Controller-4 Control unit Operating instructions Contents Safety... 4 General instructions 4 Safety instructions 4 Description... 5 Purpose and application 5 Configuration 5 Design 5 Connections
More informationManual and application description 4 channel 0-10V dimmer V2.0
1 Manual and application description 4 channel 0-10V dimmer V2.0 2 1. Device description 1.1 General 0-10V dimmer is used for proportional control of 4 electronic ballasts with 1-10 V signal. There are
More informationSupplementary operating instructions for your air curtain system Controller TMC 500
Supplementary operating instructions for your air curtain system Controller TMC 500 (Translation of the original) Serial number: Year: Please quote this number when contacting customer service! Date 08.04.2016
More informationPush-buttons 18. Light scenes push-buttons 21. Push-buttons with thermostat 22. Labelling ields 24
A wide array of alternative materials and colours have been added to the convenient variety of KNX functionality of the. Frameless KNX push-button with full-material rockers (glass, stainless steel and
More informationiridium for HDL-BUS Pro
iridium for HDL-BUS Pro Fast Start: Connection Setting Manual for HDL-BUS Pro (Smart-Bus) equipment Review of iridium Software Package for HDL-BUS Pro: The iridium software package includes several components
More information3RG7 Opto-BERO Photoelectric Proximity Switches
K 80 Sensing range 2 m (energetic sensor) Diffuse sensors Modulated infrared light DC or AC/DC M 12 plug or moulded plastic joint IP 67 ON-delay, OFF-delay, pulse shaping Timer 0.01 s to 10 s Enabling
More informationHDL KNX / EIB-BUS HDL KNX / EIB BUS M/HS05.1. (Intelligent Installation Systems) Product Manual. Contents
HDL KNX / EIB-BUS (Intelligent Installation Systems) Product Manual Contents 1-General... 3 1.1-Product Function... 3 2- Hardware... 4 2.1 Technical data... 4 2.2 Dimension drawings... 6 2.3 Wiring diagram...
More informationMaster room unit for RRV controllers
2 722 Master room unit for RRV controllers 2 wire bus connection QAX850 Multifunctional, digital room unit for installer and end-user interface with RRV controllers. Use Use Application Room unit in combination
More informationJUMO ecotrans ph 03 Microprocessor transmitter/ switching device for ph/redox voltage and temperature
Page 1/7 JUMO ecotrans 03 Microprocessor transmitter/ switching device for /Redox voltage and temperature with a 2-line LCD for mounting on a 35 mm DIN rail Brief description Depending on the configuration,
More informationSTANDALONE INTERFACE USB-DMX DIN V 1.6.1
STANDALONE INTERFACE USB-DMX DIN V 1.6.1 SUMMARY Hardware Technical Specifications... 3 Dimension of the interface... 4 Front face... 4 Top face... 4 General pinout and device's connector... 5 External
More informationR-ION Topologies R-ION TOPOLOGIES DOCUMENT. Rev H (Apr 2018)
R-ION TOPOLOGIES DOCUMENT Rev H (Apr 2018) Basic user-interface only with connecton to local controller or supervisory system (models RS2-W / RS-W) Bacnet MSTP (models RS2-S / RS-S) Modbus RTU (models
More informationECL Comfort V a.c. and 24 V a.c.
Data sheet ECL Comfort 200 230 V a.c. and 24 V a.c. Application The ECL Comfort 200 electronic controller is pre-programmed for a variety of different applications. Each application has its own card describing
More informationK-BUS R. Dimming Actuators. User manual-ver. 4 KA/D KA/D KA/D KA/D 04.T1.1 ADTV-04/16.1 KA/D 04.L1.1 ADLD-04/
Guangzhou Video-star Electronics Industrial Co., Ltd K-BUS R Dimming Actuators User manual-ver. 4 KA/D 0103.1 KA/D 0203.1 KA/D 0403.1 KA/D 04.T1.1 ADTV-04/16.1 KA/D 04.L1.1 ADLD-04/03.1...... KNX/EIB Intelligent
More informationVARIA VARIA 826 S WH KNX VARIA 826 S BK KNX D GB F I E NL. Installation and operating instructions Room thermostat VARIA 826 S KNX
307031 VARIA VARIA 826 S WH KNX VARIA 826 S BK KNX 8269210 8269211 GB Installation and operating instructions Room thermostat D GB F I E NL VARIA 826 S KNX Contents Basic safety instructions 3 Display
More informationMain Controller with Gateway EL-M01
S M A R T f o r y o u r h o m e P r o d u c t c a t a l o g u e 1 CONTROLLERS 2 Main Controller with Gateway EL-M01 ON BUS NET STATUS DIMM EXPAND 1 1 2 3 4 www.entia.si MAIN Main Controller w/ GW UTP NET
More informationInstallation Instructions
Dual EIB bus coupler Order no.: 1246 651, 1246 661, 1246 671 rmation The Gira SmartSensor is a product of the Instabus KNX/EIB System and complies with KNX/EIBA directives. The functions of the device
More informationPassion for KNX innovation
Passion for KNX innovation Touch-MyDesign 2 ZVI-TMDP4 ZN1AC-UPFRCR (122.7 x 90.2 x 12 mm.) Touch-MyDesign is a KNX switch with capacitive buttons that satisfies the design requirements of any building
More informationRoom controller LS 990 / LS plus Stainless Steel / Aluminium
Room controller LS 990 / LS plus Stainless Steel / Aluminium 1 RCDES 2021 RCDES 2022 RCDES 2023 RCDES 2024 RCDES 2044 2 Ref.-No. KNX room controller display ETS-product family: Heating, ventilation, A/C
More informationOT EASY 60 II. LED control unit Operating instructions
II LED control unit Operating instructions Contents Safety... 4 General instructions 4 Safety instructions 4 Intended use 4 Description... 5 Function and application 5 Function 5 Important definitions
More informationDELTA style 6/1. 6/6 Introduction. 6/7 Frames. 6/8 Switches and pushbuttons. 6/14 Socket outlets. 6/16 International plug-and-socket devices
/ Introduction /7 Frames /8 Switches and pushbuttons /14 Socket outlets /1 International plug-and-socket devices /17 Shutter/blind controls /21 Lighting controls /24 Motion detectors /2 Room temperature
More informationTechnical Documentation Intensity
Intensity Status: Draft Firmware Version : v1.4 Hardware Version : Intensity Snr. 140505 / 140203 Order Number: INTXXX Technical Details: Power Supply Maximum Power Consumption Bus Power Consumption Fan-In
More informationArteor TM Radio/ZigBee
Arteor TM Radio/ZigBee n Switches and dimmers maximum loads at 230 V For values at 0 V, please halve values Leading edge Trailing edge Cat.Nos. Incandescent lamp Halogen lamp ELV halogen with ferromagnetic
More informationRCF-230CAD. Room controller with communication for fancoil applications with two analogue V DC outputs
revision 04 2016 RCF-230CAD Room controller with communication for fancoil applications with two analogue 0...10 V DC outputs Intended to control heating and/or cooling in 2- or 4-pipe installations. Setpoint
More informationProduct documentation
Product documentation Universal push-button module with integrated BCU, 1-gang Universal push-button module with integrated BCU, 2-gang Universal push-button module with integrated BCU, 3-gang Universal
More informationProgrammable Automation Controller Sensors and I/O modules com
Programmable Automation Controller Sensors and I/O modules com RoHS Compliant Technical specifications 1 Linux Inside 2 3 4 5 Comes with fully Open Source Debian Linux-based software ARM Cortex A7 core
More informationGateway configuration manual IP - KNX EK-BE1-TP
IP - KNX EK-BE1-TP Index Scope of the document... 3 1 Product description... 3 1.1 Main functions... 4 1.2 Technical data... 4 1.3 Supply... 5 1.4 System requirements for configuration software... 5 1.5
More informationKNX SYSTEM INSTALLATION AND CONFIGURATION GUIDE
KNX SYSTEM INSTALLATION AND CONFIGURATION GUIDE Contents 4 INTRODUCTION TO THE KNX OFFER 4 Composition 6 KNX standard architecture 7 Wiring rules 8 IP structure 9 ETS software 10 DEVICE PRESENTATION AND
More informationSeries SD-3PB Digital THERMOSTAT + TIMER
SD-3PB Thermostat and Interval Timer in one Unit. This microcomputer based controller consists of two sections: The Digital Timer and Digital Thermostat, working together to control the power switched
More informationINDEX PRESENCE DETECTOR AND BRIGHTNESS SENSOR INFRARED TRANSMITTER/RECEIVER & DECODER. PLC LOGO! and COMMUNICATION MODULE
INDEX INTRODUCTION SINGLE PHASE POWER UNIT DL 20T70 POWER SUPPLY DL 20T7 PUSH BUTTON INTERFACE DL 20T72 DOUBLE PUSH BUTTON DL 20T74 SMOKE DETECTOR DL 20T75 TEMPERATURE CONTROLLER DL 20T76 PRESENCE DETECTOR
More informationProduct and functional description
Product and functional description Connection example The universal dimmer submodule N 528/41 is an installation device for DIN-rail mounting, with N-system dimensions. It is designed for lighting control,
More informationSECTION DIGITAL LIGHTING CONTROLS
SECTION 26 09 25 PART 1 - GENERAL 1.1 SUMMARY A. Work included: 1. General Performance 2. Digital Wall or Ceiling Mounted Occupancy Sensor System 3. Digital Wall Switches 4. Handheld Remote Controls 5.
More informationFCU-MULTI Modbus Fan Coil Unit Controller
Product Sheet CT2.61 Controller Type FCU-MULTI FCU-MULTI Modbus Fan Coil Unit Controller FCU-MULTI is completely stand-alone operating room controller designed for room heating, cooling, ventilation, lighting
More informationLDALI ME204-U, LDALI ME201 U
Functions BACnet/ Controller L ME204-U, L ME201 U BACnet CEA 709 Modbus OPC Datasheet #89021219 L WEB, L STUDIO L Controllers are multifunctional devices combining constant light con trol, sunblind control
More informationSee instructions to download and install the latest version of LinkBoxLON and the user's manual at
Safety Instructions WARNING Follow carefully this safety and installation instructions. Improper work may lead to serious harmful for your health and also may damage seriously the IntesisBox and/or any
More informationScreenLine Accessories MB model
ScreenLine Accessories MB model ST2121 Control Module 1 group of blinds (PC configuration) control (Potential separated) Individually configurable via Configuration Utility (PC) DIN rail mounting Dim.:
More informationVBAR 270. User Manual. Version 1.2
VBAR 270 User Manual Version 1.2 VBAR 270 User Manual Page 1of 19 Introduction Thank you for purchasing VBAR 270. VBAR 270 is a LED light fixture for professional use. Using the RGB color mixing technology
More informationR-150 DMX Light Source
R-150 DMX Light Source Instruction Menu Thank You for purchasing the R-150 DMX LIGHT SOURCE. Please read carefully the instruction menu before using the R-150 DMX LIGHT SOURCE. If you have any questions
More informationIntesisBox. KNX - Mitsubishi Electric G50. Gateway for integration of Mitsubishi Electric City Multi air conditioners into KNX control systems.
IntesisBox KNX - Mitsubishi Electric G50 Gateway for integration of Mitsubishi Electric City Multi air conditioners into KNX control systems. Integrate Mitsubishi Electric City Multi Air Conditioning systems
More informationUser Manual HDL ON.
User Manual HDL ON www.hdlautomation.com INDEX 1 Overview... 3 1.1 General Information... 3 1.2 System Connection... 3 2 System Configuration... 3 2.1 Register Account... 4 2.2 Add Area and Binding MAC...
More informationUser Manual. Logic Timer Module. SB-DN-Logic960.
Logic Timer Module www.hdlautomation.com Document updates: Version Date Description V1.0 2015.01.26 Finish new document INDEX 1. Overview...1 1.1 General Information...1 1.1.1 Description...1 1.1.2 Mounting...
More informationHow to choose the correct Mount Kelvin central unit
Installation guide Outside world Property Wirepas mesh Mount Kelvin app Internet connection Ethernet DALI 3rd party integrations Mount Kelvin cloud Mount Kelvin central unit Voice control EnOcean wireless
More informationclarity 3 Programmable Controller
clarity 3 Programmable Controller BACnet General Purpose Controllers (B-AAC) DESCRIPTION Taco Clarity 3 FPC series controllers are designed to control building systems and HVAC equipment. The integrated
More informationEXOcompact. Freely programmable controller
flik plats revision 0 710 12 2005 EXOcompact Freely programmable controller A small and compact controller in three different I/O sizes and with different kinds of communication, with or without internal
More informationBrief description. Type overview
echnical data sheet VAV-Compact D3 VAV-Compact controller with integrated pressure sensor, VAV controller and damper actuator for pressure-independent VAV and CAV applications in the comfort zone Control:
More informationWebinar KNX Sensors commercial Buildings
JUNE 2017 Webinar KNX Sensors commercial Buildings BU EPBP GPG Building Automation Carolina Bachenheimer-Schaefer, Thorsten Reibel, Jürgen Schilder & Ilija Zivadinovic Global Application and Solution Team
More informationApplication program: description and examples
F a n C o i l U n i t C o n t r o l l e r F a n C o i l 4 9 5 5 1 Application program: description and examples Woertz AG Electrotechnical accessories, installation systems Hofackerstrasse 47, P.O. Box
More informationIntesisBox KNX - BACnet/IP Client
IntesisBox KNX - BACnet/IP Client Gateway for integration of BACnet/IP devices into KNX control systems. Integrate Daikin VRV Air Conditioners into your KNX system. Daikin VRV system must be equipped with
More informationTX-I/O Product Range. Description. Technical Specification Sheet Document No February 20, 2018
Technical Specification Sheet Document No. 149-476 February 20, 2018 TX-I/O Product Range TX-I/O is a range of I/O modules, with associated power and communication modules, for use within the APOGEE Automation
More informationDimmers - Clipsal by Schneider Electric
13/12/2017 Dimmers - Clipsal by Schneider Electric Dimmers Intelligent and comprehensive dimming solutions for a wide variety of control requirements. The ranges available share an innovative modular design
More informationapplication software
application software application software RF input product Electrical / Mechanical characteristics: see product user manual Product reference Product designation TP device RF devices 8565 52 xx 8565 62
More informationIPassan Installation guide
IPassan Installation guide 1 Content 1 Overview... 3 1.1 Features... 3 1.2 Hardware... 3 1.2.1 s... 3 1.2.2 Extra modules... 5 1.3 IPassan manager... 7 2 Installation... 7 2.1... 8 2.1.1 Power supply...
More informationIntegration Note OVERVIEW AND SUPPORTED FEATURES
Manufacturer: Model Number(s): KNX Climate (Various) Minimum Core Module g! 5.4 Version: g! 6.2 Minimum for Fan Coil Climate Modes Document Revision Date: 10/8/2015 OVERVIEW AND SUPPORTED FEATURES Integration
More informationCommunicative controller for VAV systems
FCR015 Communicative controller for VAV systems Summary FCR015 is a communicative controller for heating and cooling panels and a VAV (variable air volume) damper. It measures temperature and CO 2 concentration
More informationCompact UV wash featuring ultra wide coverage and high-output COB LED
Compact UV wash featuring ultra wide coverage and high-output COB LED 2 15 TABLE OF CONTENTS SAFETY / GENERAL INSTRUCTIONS INTRODUCTION Features Specifications OVERVIEW Front view Rear view DIMENSIONS
More informationApplication description. Motion detector KNX- BCU
Application description Motion detector KNX-BCU Electrical/mechanical data: see the operating instructions for the product Order number Product designation Application programme TP product Radio product
More informationProvolt 0-10V Dimming Room Controllers (PRC)
(PRC) Easy-to-Install Self-Contained Lighting Control Solution Light Pipe DESCRIPTION The Leviton exclusive Provolt Room Controllers (PRC) offer high performance, code compliant, advanced room configuration
More informationHeating Circuit Controller
2 705 Synco 900 Heating Circuit Controller RRV912 RF-controlled heating circuit controller for up to 2 heating circuits RF communication based on KNX standard (868 MHz, bidirectional) Connection facility
More information