Maintenance protocol circuit breaker
|
|
- May Lyons
- 5 years ago
- Views:
Transcription
1 Maintenance protocol circuit breaker / KP (Exemplary illustration) - Circuit breaker / KP Document no.: Revision: A EN GB
2 Original operation manual This document is updated regularly. Always use the current version of the document. You can find the current version of the document on the Woodward website: Document history Woodward document revisions The first released version of a document has the revision acronym A. All further revisions are identified alphabetically from B to Z. After the revision Z, AA, AB, AC etc. follow. General corrections Date Version Modification carried out by Product specific corrections Date Version Modification carried out by
3 Table of contents Table of contents Data sheet... 4 Annual maintenance inspections... 5 Maintenance inspections every 2 years or after 100 cycles)... 6 Maintenance inspections every 5 years... 7 Declaration DOCUMENT - TD MAINTENANCE PROTOCOL - ACB - ENGLISH 3 / 10
4 Data sheet Type Circuit breaker serial number Woodward serial number Location Switching cycles Fig. 1 Front view - circuit breaker 1 Switching cycle counter 16 Name plate with circuit breaker serial number 18 Name plate with Woodward serial number 4 / DOCUMENT - TD MAINTENANCE PROTOCOL - ACB - ENGLISH
5 Annual maintenance inspections General state checked yes no remark Mechanism checked Switching contact chambers (arc chambers and main contacts) checked Auxiliary contacts checked Over current relay checked Device locking (mechanical interlocking and Profalux padlocking system) checked DOCUMENT - TD MAINTENANCE PROTOCOL - ACB - ENGLISH 5 / 10
6 Maintenance inspections every 2 years or after 100 cycles) Mechanism checked yes no remark Switching contact chambers (arc chambers and main contacts) checked Auxiliary contacts checked Over current relay checked Power connections (L1, L2 and L3) checked 6 / DOCUMENT - TD MAINTENANCE PROTOCOL - ACB - ENGLISH
7 Maintenance inspections every 5 years Housing checked yes no remark Power connections (L1, L2 and L3) checked DOCUMENT - TD MAINTENANCE PROTOCOL - ACB - ENGLISH 7 / 10
8 Declaration The technician declares by means of his signature that he has serviced the CONCYCLE circuit breaker properly according to the maintenance instructions. The technician declares further that all deficiencies on the circuit breaker were remedied and that operation of the circuit breaker can be restarted without danger for people or the machine. Operation of the circuit breaker has been restarted. Operation of the circuit breaker has not been restarted. Remarks Date: Name: Signature 8 / DOCUMENT - TD MAINTENANCE PROTOCOL - ACB - ENGLISH
9 (is edited by Woodward) Receipt confirmation Maintenance accepted. Date: Company stamp A proper and accepted maintenance extends the contractually agreed warranty. Maintenance not accepted because DOCUMENT - TD MAINTENANCE PROTOCOL - ACB - ENGLISH 9 / 10
10 Woodward Kempen GmbH Krefelder Weg KEMPEN (GERMANY) P.O. Box KEMPEN (GERMANY) Phone: Internet Sales Phone: Telefax: Service Phone: /398 Telefax: We are interested in your opinion and ideas about this documentation. Please send any feedback to: Please enter the document number: DOCUMENT - TD MAINTENANCE PROTOCOL - ACB - ENGLISH Woodward reserves the right to modify and update any part of this publication at any time. All information provided by Woodward has been checked for correctness to the best of our knowledge. However, Woodward is not liable for the contents if Woodward does not give an explicit warranty. Woodward. All rights reserved at Woodward. March 2016
Maintenance protocol CW1251LD-C02 / CW1331LD-C02 / CW1211LD-C04. - MP1 Frequency converter EN GB. Document no.: Revision: A
Maintenance protocol CW1251LD-C02 / CW1331LD-C02 / CW1211LD-C04 (Exemplary illustration) - MP1 Frequency converter Document no.: 9943-1992 Revision: A EN GB Original operation manual This document is updated
More informationMRT1 Test Unit. Manual MRT1 (Revision A)
MRT1 Test Unit Manual MRT1 (Revision A) Woodward Manual MRT1 GB Woodward Governor Company reserves the right to update any portion of this publication at any time. Information provided by Woodward Governor
More informationMRU4 Profibus DP HighPROTEC. Data point list. Manual DOK-TD-MRU4PDE
MRU4 Profibus DP HighPROTEC Data point list Manual DOK-TD-MRU4PDE Table of Contents Table of Contents TABLE OF CONTENTS... 2 PROFIBUS... 3 Configuration... 3 DATA POINT LISTS... 4 Signals... 4 Measuring
More informationMRA1 Trip circuit supervision. Manual MRA1 (Revision A)
MRA1 Trip circuit supervision Manual MRA1 (Revision A) Woodward Manual MRA1 GB Woodward Governor Company reserves the right to update any portion of this publication at any time. Information provided by
More informationMRI4 Profibus DP HighPROTEC. Data point list. Manual DOK-TD-MRI4PDE
MRI4 Profibus DP HighPROTEC Data point list Manual DOK-TD-MRI4PDE Table of Contents Table of Contents TABLE OF CONTENTS... 2 PROFIBUS... 3 Configuration... 3 DATA POINT LISTS... 4 Signals... 4 Measuring
More informationXU1-E Earth fault voltage relay. (August 1996) Manual XU1-E (Revision New)
XU1-E Earth fault voltage relay (August 1996) Manual XU1-E (Revision New) Woodward Manual XU1-E GB Woodward Governor Company reserves the right to update any portion of this publication at any time. Information
More informationXG2 Generator-/Mains Monitor. Manual XG2 (Revision A)
XG2 Generator-/Mains Monitor Manual XG2 (Revision A) Woodward Manual XG2 GB Woodward Governor Company reserves the right to update any portion of this publication at any time. Information provided by Woodward
More informationXE2 DC current relay for loss of excitation protection. Manual XE2 (Revision A)
XE2 DC current relay for loss of excitation protection Manual XE2 (Revision A) Woodward Manual XE2 GB Woodward Governor Company reserves the right to update any portion of this publication at any time.
More informationWoodward USB WIC1-PC3. WI-Soft2 Parameterisation and Diagnosis Software. (Revision A)
USB WIC1-PC3 WI-Soft2 Parameterisation and Diagnosis Software (Revision A) Manual WIB1 EN Contents 1. Foreword... 3 2. Usage area of WI-Soft2... 4 3. Installation/Uninstallation... 5 3.1 Hardware and software
More informationXU1-DC DC voltage relay. (June 1998) Manual XU1-DC (Revision New)
XU1-DC DC voltage relay (June 1998) Manual XU1-DC (Revision New) Woodward Manual XU1-DC GB Woodward Governor Company reserves the right to update any portion of this publication at any time. Information
More informationMRM4 Profibus DP HighPROTEC. Data point list. Manual DOK-TD-MRM4PDE
MRM4 Profibus DP HighPROTEC Data point list Manual DOK-TD-MRM4PDE Table of Contents Table of Contents TABLE OF CONTENTS... 2 PROFIBUS... 3 Configuration... 3 DATA POINT LISTS... 4 Signals... 4 Measuring
More informationMCA4 Profibus DP HighPROTEC. Data point list. Manual DOK-TD-MCA4PDE
MCA4 Profibus DP HighPROTEC Data point list Manual DOK-TD-MCA4PDE Table of Contents Table of Contents TABLE OF CONTENTS... 2 PROFIBUS... 3 Configuration... 3 DATA POINT LISTS... 4 Signals... 4 Measuring
More informationIRI1-ES Sensitive Earth Fault Current Relay. Manual IRI1-ES (Revision A)
IRI1-ES Sensitive Earth Fault Current Relay Manual IRI1-ES (Revision A) Woodward Manual IRI1-ES GB Woodward Governor Company reserves the right to update any portion of this publication at any time. Information
More informationMRA4 Profibus DP HighPROTEC. Data point list. Manual DOK-TD-MRA4PDE
MRA4 DP HighPROTEC Data point list Manual DOK-TD-MRA4PDE Table of Contents Table of Contents TABLE OF CONTENTS... 2 PROFIBUS... 3 Configuration... 3 DATA POINT LISTS... 4 Signals... 4 Measuring values...
More informationFunctional safety manual RB223
SD00011R/09/EN/13.13 71238251 Products Solutions Services Functional safety manual RB223 Passive barrier Application Galvanic isolation of active 0/4 to 20 ma signals from transmitters, valves and adjusters,
More informationNotice For all work on the devices, you must observe the ESD regulations.
Installation of the cable for the contactor checkback signal Supplement/description Description A cable for the contactor checkback signal is used to monitor pre-charging and bypass contactors mainly in
More informationBMF400 Input/output module
BMF400 Input/output module Input/output module with six universal inputs/outputs and four floating relay outputs for function extensions of the BMR bus module controller. Issue date: December 6, 2006 Subject
More informationElectronic Temperature Controller. Instruction Manual Version
Electronic Temperature Controller 701 Instruction Manual Version 1.00.01 Dear Customer, we have made up this operating manual in such a way that all necessary information about the product can be found
More informationOriginal operating instructions Safety relay with relay outputs with and without delay G1502S / / 2016
Original operating instructions Safety relay with relay outputs with and without delay UK G50S 803638 / 00 0 / 06 Contents Preliminary note...4. Symbols used...4 Safety instructions...5 3 Items supplied...6
More informationCONFIGURABLE SAFETY RELAYS
CONFIGURABLE SAFETY RELAYS The cycle control function of the configurable MSI allows efficient semi-automatic processes Special features Single or double-cycle operation with 0 s / 0 min time monitoring
More informationPSR UC/ESAM4/3X1/1X2/B
Safety relay for emergency stop and safety door monitoring Data sheet 105318_en_02 PHOENIX CONTACT 2014-06-13 1 Description The safety relay can be used in safety circuits according to EN 60240-1 and IEC
More informationMEDIUM VOLTAGE PRODUCTS. UniSec Air-insulated medium voltage secondary distribution switchgear Informed choice for safety
MEDIUM VOLTAGE PRODUCTS UniSec Air-insulated medium voltage secondary distribution switchgear Informed choice for safety 2 UNISEC AIR-INSULATED MEDIUM VOLTAGE SECONDARY DISTRIBUTION SWITCHGEAR Operator
More informationSR101A. User Information for SR101A. Correct Use
Correct Use is the low-cost emergency stop safety relay with which machines and systems can be safely switched off by disconnecting the power supply. Internal fault monitoring takes place during restarting
More informationABB i-bus KNX Weather Unit, 1-fold, MDRC WZ/S , 2CDG110184R0011
Technical Data 2CDC504091D0201 ABB i-bus KNX Product description The Weather Unit WZ/S 1.3.1.2 is used - primarily in residential applications - to record weather data. The Weather Sensor WES/A 3.1 is
More informationMSI-RM2 Safety Relays
MSI-RM2 Safety Relays EN 2010/11-603021 We reserve the right to make technical changes SAFE IMPLEMENTATION AND OPERATION Original operating instructions Relay module for Optoelectronic Protective Devices
More informationConext CL-60 Inverter Firmware Upgrade Process
Conext CL-60 Inverter Firmware Upgrade Process http://solar.schneider-electric.com 976-0380-01-01/B August 2017 Application Note EXCLUSION FOR DOCUMENTATION UNLESS SPECIFICALLY AGREED TO IN WRITING, SELLER
More informationSR103AM. User Information for SR103AM. Correct Use
Correct Use The is a universal emergency stop safety switching device with three safe relay outputs that can quickly and safely stop the moving parts of a machine or system in case of danger. Applications
More informationHohenstein Laboratories GmbH & Co. KG Schloss Hohenstein Boennigheim Germany
Certification Body Products Hohenstein Laboratories GmbH & Co. KG Schloss Hohenstein 74357 Boennigheim Germany File: APPLICATION for award of the GS safety mark for a HuPF assessment (for products) for
More informationMRP2-S3 Apparent Power Relay. Manual MRP2-S3 (Revision A)
MRP2-S3 Apparent Power Relay Manual MRP2-S3 (Revision A) Woodward Manual MRP2-S3 GB Woodward Governor Company reserves the right to update any portion of this publication at any time. Information provided
More informationFigure 1: Device components
, switch function, push-button function Art.-No.: 240-31 Operating instructions 1 Safety instructions Electrical equipment may only be installed and fitted by electrically skilled persons. Failure to observe
More informationLVDT Test Device. Product Manual (Revision B) Original Instructions. Testing and Calibration of LVDT Feedback Devices on PG Governors
Product Manual 55036 (Revision B) Original Instructions Testing and Calibration of LVDT Feedback Devices on PG Governors Operation Manual DEFINITIONS This is the safety alert symbol. It is used to alert
More informationOriginal operating instructions Safety relay with relay outputs G1501S / / 2016
Original operating instructions Safety relay with relay outputs G50S UK 8023637 / 00 02 / 206 Contents Preliminary note...4. Symbols used...4 2 Safety instructions...5 3 Items supplied...6 4 Functions
More informationABB i-bus KNX Analogue Input, 4-fold, MDRC AE/S , 2CDG110190R0011
Technical Data 2CDC504084D0201 ABB i-bus KNX Product description The device is used to record analogue data. Four conventional sensors can be connected to the device. The connection to the bus is established
More informationPSR DC/ESP4/2X1/1X2
PSR-...- 24DC/ESP4/2X1/1X2 Safety relay for emergency stop and safety door monitoring Data sheet 100516_en_05 PHOENIX CONTACT 2013-11-21 1 Description The safety relay can be used for emergency stop and
More informationMedium Voltage Service Course Description Training Course CZ045 Operation and maintenance of UniGear ZS1 with VD4 and REF 620
Medium Voltage Service Course Description Training Course CZ045 Operation and maintenance of UniGear ZS1 with VD4 and REF 620 Course Modules Course ID Course Venue Brno,Czech Republic Course Duration CZ045
More informationAS-i Safety Relay Output Module with Diagnostic Slave
AS-i Safety Relay Output Module with Diagnostic Slave User Manual Revision date: 2013-01-30...supports the requirements for AS-i Safety up to SIL3 Subject to modifications without notice. Generally, this
More informationOperating Instructions
Innovative by tradition. Operating Instructions Control Unit SG-RSV 239 Version 1 1003986 SG-RSV 239/24 24 V= 1005372 SG-RSV 239/36 36 V= 1003271 SG-RSV 239 50-150 V= Mayser GmbH & Co. KG Örlinger Straße
More informationBN1-400 Mains decoupling relay. (February 2000) Manual BN1-400 (Revision New)
BN1-400 Mains decoupling relay (February 2000) Manual BN1-400 (Revision New) Woodward Manual BN1-400 GB Woodward Governor Company reserves the right to update any portion of this publication at any time.
More informationpicture 1: Device components
Tronic rotary dimmer with soft-lock Order-No. : 2874 Operation- and Assembly Instructions 1 Safety instructions Electrical equipment may only be installed and fitted by electrically skilled persons. Failure
More informationRev Operating Instructions Busch-Dimmer. Potentiometer U-101
1473-1-7906 Rev. 01 17.12.2012 Operating Instructions Busch-Dimmer Potentiometer 2112-101 2112 U-101 Busch-Dimmer 1 Safety... 3 2 Intended use... 3 3 Environment... 3 4 Technical data... 4 5 Setup and
More informationConext EasyConfig Tool
Conext EasyConfig Tool Owner s Guide 975-0796-01-01 Revision A 05-2018 http://solar.schneider-electric.com Copyright 2018 Schneider Electric. All Rights Reserved. All trademarks are owned by Schneider
More informationLarge Frame IEC Contactors
Large Frame IEC Contactors Bulletin 100-E PUBLIC Copyright 2017 Rockwell Automation, Inc. All Rights Reserved. 1 Changing Applications for Contactors There are fewer and fewer traditional large motor starting
More informationABB i-bus KNX Analogue Actuator, 4-fold, MDRC, 0-10 V, 0-20 ma AA/S 4.1.2, 2CDG110202R0011
Technical Data 2CDC505168D0201 ABB i-bus KNX Product description The Analogue Actuator converts telegrams received via KNX into analog output signals. The device has four outputs. The analog outputs can
More informationRVDT Setup and Polarity Checking Tool for EG Governors. Product Manual (Revision B) Original Instructions T87444
Product Manual 01504 (Revision B) Original Instructions RVDT Setup and Polarity Checking Tool for EG Governors T87444 Operation and Calibration Manual General Precautions Read this entire manual and all
More informationUser Manual Software for DSL Digital Speed Switch
User Manual Software for DSL Digital Speed Switch Software version from 0.9.9 Max-Dohrn-Str. 2+4 D-10589 Berlin Phone +49 (0)30 690 03-0 Fax +49 (0)30 690 03-104 info@baumerhuebner.com www.baumer.com Contents
More informationExplosion-Protected Arc-Fault Protection ExAFCI Arc-Fault Circuit Interrupter
Installation, Operation & Maintenance Sheet Explosion-Protected Arc-Fault Protection ExAFCI Arc-Fault Circuit Interrupter > Contents 1 Contents 1 Contents...2 2 General Information...2 2.1 Manufacturer...2
More informationWiring Instructions for Replacement of 2301A Load Sharing and Speed Controls with 2301D Load Sharing and Speed Controls
Application Note 51242 (Revision NEW) Original Instructions Wiring Instructions for Replacement of 2301A Load Sharing and Speed Controls with 2301D Load Sharing and Speed Controls General Precautions Read
More informationOperating Instructions. Control Units for Belt Drives EBF-05
Operating Instructions Control Units for Belt Drives EBF-05 BA Rhein-Nadel Automation GmbH Rhein - Nadel Automation GmbH 1 Contents 1 Technical Data 1.1 Functional description... 3 1.2 EC Conformity...
More informationR70 Ethernet to CAN interface Manual (1.4 EN)
R70 Ethernet to CAN interface Manual (1.4 EN) General information R70 Ethernet to CAN interface Manual Version 1.4 EN, 04/2009, DOC01816 Copyright 2009 by d&b audiotechnik GmbH; all rights reserved. d&b
More informationAS-Interface Safety at Work
2 rue René Laennec 51500 Taissy France Fax: 03 26 85 19 08, Tel : 03 26 82 49 29 E-mail:hvssystem@hvssystem.com Site web : www.hvssystem.com AS-Interface Safety at Work SAFETY AT WORK PRODUCT INFORMATION
More informationPower supply. Phases: 3. Short-circuit capacity 10 ka AGS
5113003 Power supply Voltage: 400 V AC Phases: 3 Frequency: 50 Hz Current: 6 A Short-circuit capacity 10 ka AGS CE marking location The CE marking is located on the outside of the door, in the upper left
More informationGateway Computer Keyboard KB-0532 AC 5V / 200 ma China. how a keyboard works. As it turns out, there are many different types of keyboards that can
Jaxon Castro 9/28/17 Queen Creek High School Robotics Team 8235S Name Model No. Power Manufactured Gateway Computer Keyboard KB-0532 AC 5V / 200 ma China Some Research: Doing research prior to the deconstruction
More informationEnglish. Operating manual. Universal transmitter UT125. Save for later reference. Companies / brands of GHM
English Operating manual Universal transmitter UT125 Companies / brands of GHM www.ghm-messtechnik.de Save for later reference. Table of contents page 1. Intended use (areas of application)... 3 1.1 Safety
More informationMSI Safety Relays compact and versatile
MSI Safety Relays compact and versatile PRODUCT INFORMATION MSI the Safety Relay family from Leuze electronic. Always the right link between safety device and machine. Regardless of whether you need simpler
More informationSCADA Protocol Configuration Tool Manual SCADAP-1.0-EN-MAN
SCADA Protocol Configuration Tool Manual SCADAP-1.0-EN-MAN SCADAPTER Version: 1.0 English Original document Revision: - (Build 41128) 2019 Manual (original) Woodward Kempen GmbH Krefelder Weg 47 D 47906
More informationLENGTH-ANGLE-RADIUS-LOAD INDICATING SYSTEM
www.patamerica.com PAT America, Inc. LENGTH-ANGLE-RADIUS-LOAD INDICATING SYSTEM EI65/0005 OPERATOR S MANUAL P/N 056-065-190-005, Rev. C, 6/15/00 Operator s Manual EI65 / 0005 NOTICE The information in
More informationElectrical devices may only be mounted and connected by electrically skilled persons.
DALI gateway TW Art. No. : 2099REGHE Operating instructions 1 Safety instructions Electrical devices may only be mounted and connected by electrically skilled persons. Serious injuries, fire or property
More informationApplication Note (Revision NEW) Original Instructions. Upgrading DRFDs to SPCs
Application Note 51322 (Revision NEW) Original Instructions General Precautions Read this entire manual and all other publications pertaining to the work to be performed before installing, operating, or
More informationDPM Active Harmonic Filter Quick Start Instructions
DPM Active Harmonic Filter Quick Start Instructions These instructions will guide you through installing, testing your installation, and starting up your DPM. For additional information please refer to
More informationASM1, ASM1E, ASM2E. AS-i Safety Monitor. Subject to change without prior notice. Technische Änderungen vorbehalten /02
ASM1, ASM1E, ASM2E AS-i Safety Monitor 50101229-2009/02 Technische Änderungen vorbehalten Subject to change without prior notice Information on the use of the connecting and operating instructions These
More informationSPA-ZC 200/SPA-ZC 202 IEC /SPA-gateway Modules. Installation Manual
Issued: 29.03.2001 Version: A/29.03.2001 Checked: M.K. Approved: We reserve the right to change data without prior notice. Contents: 1. Safety information...4 2. Introduction...5 2.1. Contents of delivery...5
More informationSafety Technique. SAFEMASTER C Multifunction Safety Module BH 5910
Safety Technique SAFEMASTER C Multifunction Safety Module BH 59 47 Block Diagram A+ A S S S4 S S S S4 S S S S4 S S4 S4 S44 S4 PTC Galvanic separation Monitoring logic Monitoring logic Galvanic separation
More informationTechnical Manual. cctalk USB Hub CCT 910
Technical Manual cctalk USB Hub CCT 910 - - June 2010 wh Münzprüfer Berlin GmbH Teltower Damm 276 D - 14167 Berlin Technical Manual CCT 910 wh Münzprüfer Berlin GmbH, Germany Content 1. CCT 910 Overview...4
More informationData Reporter. Installation-Operation E rev.f
Installation-Operation Data Reporter 309867E rev.f Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. Part No. 246085 Records actual temperature,
More informationActuating drive with spring return DSFY/16 Modulated actuating drive with spring return
ctuating drive with spring return DSFY/16 Modulated actuating drive with spring return Issue date: Feb. 27, 2006 Subject to change Contents Page Information about the device description... 2 Qualified
More informationAllen-Bradley Drives
Overview/Product Selection Bulletin IEC Industrial Safety Relay Positively Guided/Mechanically Linked as Per IEC 947-5-1 Annex L Third Party Certification By SUVA Red Cover and Mechanically Linked Contact
More informationTap Manager TM100. Operating Instructions
Tap Manager TM100 Operating Instructions 2 Contents Contents 1 General... 5 1.1 Safety instructions... 5 1.2 Application... 5 2 Design... 6 2.1 Controls... 6 2.1.1 Scroll keys in display field... 6 2.1.2
More informationPTB 01 ATEX Example / Beispiel / Exemple. Type Operating Instructions
Device with II 2G EX i approval Geräte mit II 2G EX i Zulassung Appareils avec mode de protection II 2G EX i Example / Beispiel / Exemple Type 6106 Operating Instructions Bedienungsanleitung Manuel d utilisation
More informationSECTION 16 LED DIAGNOSTIC FEATURES: EXPANSION UNITS: SCR-31P-i. SCR-73-i. SEU-31-i. SCR-31-42TD-i. SEU-31TD-i
SECTION 16 VIPER Safety Relays Type: SCR-i (with added diagnostics) SAFETY RELAY FUNCTION: IDEM s VIPER SCR-i range of Safety Relays have been designed in accordance with EN60204-1 for safety circuits
More informationMRP2 - Directional Power Relay. Manual MRP2 (Revision B)
MRP2 - Directional Power Relay Manual MRP2 (Revision B) Woodward Manual MRP2 GB Woodward Governor Company reserves the right to update any portion of this publication at any time. Information provided
More informationSafe monitoring relays
monitor for safe standstill monitoring Approvals Block diagram Unit features Positive-guided relay outputs: 2 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous LED indicator
More informationProduct and functional description
Product and functional description The RS 520/23 shutter / blind actuator is a KNX device with one relay output. The device is installed in an AP 118 Control Module Box or an AP 641 Room Control Box. The
More informationADDENDUM NO. 1 ITB-DOT BAT. You are hereby notified that the above referenced Invitation to Bid (ITB) is modified as shown below:
ADDENDUM NO. 1 ITB-DOT-15-16-5002-BAT To: All Prospective Proposers From: Ashley Henning District Five Contractual Services Date: March 25, 2016 RE: ITB-DOT-15-16-5002-BAT ITS Battery Installation You
More informationNW08 to NW63 fixed circuit breakers Circuit breakers
fixed circuit breakers Circuit breakers DB404362.eps DB404363.eps A Masterpact fixed circuit breaker is described by 4 catalogue numbers corresponding to: b the basic circuit breaker b a control unit b
More informationTSXPAY262 Preventa safety module - 24 V DC - standard format - < 5 W
Characteristics Preventa safety module - 24 V DC - standard format - < 5 W Main Range of product Product or component type Complementary [Us] rated supply voltage Supply voltage limits Activation threshold
More informationPortable Hard Drive USB 2.0 User Guide
Portable Hard Drive USB 2.0 User Guide English Contents Introduction 3 Connecting Portable Hard Drive 3 Storing and Transferring Data 4 Disconnecting Portable Hard Drive 5 Technical Support 6 Limited Warranty
More informationAssembly and Operating Instructions Door Control
S10 GB Assembly and Operating Instructions Door Control Important information for: Fitters Electricians Users Please forward accordingly! These instructions must be kept for future reference. Assembly
More informationConverter SINAMICS G150. Type 6SL37102G
Tests carried out on drives This documentation pertains to LV Umrichter E11 F72 F76 F79 L45 L50 L57 L68 M54 U11 Reference Manual Converter SINAMICS G150 Type 6SL37102G Edition 02/2019 www.siemens.com/drives
More informationDocument C0. Use for:
Date: July 27, 2015 Document C0 Use for: Connection of Electric Generation that will operate with an Open Transition (Category 1) between the Ameren System and the Generator or operate with a Synchronized
More informationMicroNet TMR Control System
Product Specification 03363 (Rev. C) MicroNet TMR Control System Applications The MicroNet TMR (triple modular redundant) controller is a state-of-the-art digital control platform designed to reliably
More informationH Series PLC. ! : Indicates Compulsion. EH-150 Analog input module EH-AXH8M Instruction manual. Safety precautions DANGER CAUTION COMPULSION
H Series PLC EH-150 Analog input module EH-AXH8M Instruction manual Thank you for purchasing a Hitachi Programmable Logic Controller. To operate it safely, please read this instruction manual and all the
More informationPoint Level Transmitters. Pointek CLS200 (Standard) Functional Safety Manual 02/2015. Milltronics
Point Level Transmitters Pointek CLS200 (Standard) Functional Safety Manual 02/2015 Milltronics Introduction 1 General safety instructions 2 Pointek Level Instruments Device-specific safety instructions
More informationCircuit Breakers, Type CTI 25M, CTI 45MB, CTI 100
MAKING MODERN LIVING POSSIBLE Data sheet Circuit Breakers, Type CTI 25M, CTI 45MB, CTI 100 Circuit breakers for short circuit and overload protection of motor applications cover together with the circuit
More informationABB i-bus KNX Fan Coil Actuator, PWM, MDRC FCA/S , 2CDG110195R0011
Technical data 2CDC508136D0202 ABB i-bus KNX Product description The device is a modular installation device (MDRC) in Pro M design. It is intended for installation in distribution boards on 35 mm mounting
More informationMedium-Voltage Drive SINAMICS SM150. Type 6SL3845. Tests carried out on drives This documentation pertains to SM150 wassergekühlt G20 F03 F72 F79 F76
Tests carried out on drives This documentation pertains to SM150 wassergekühlt G20 F03 F72 F79 F76 Reference Manual Medium-Voltage Drive SINAMICS SM150 Type 6SL3845 Edition 02/2019 www.siemens.com/drives
More informationPHOENIX CONTACT Pin. SUBCON-PLUS M ARCNET, MULTI/MININET (B&R), SYSTEM 2003 (B&R), P-NET SUCONET K1, K2 (EATON/Moeller),
Fast connector with screw terminal block connection for fieldbus systems Data sheet 00287_en_02 PHOENIX CONTACT 207-04-2 Description The SUBCON-PLUS/... D-SUB series is specifically designed for use in
More informationConext CL-60 EasyConfig Tool
Conext CL-60 EasyConfig Tool Owner s Guide 975-0773-01-01 Revision B 08-2017 http://solar.schneider-electric.com Copyright 2017 Schneider Electric. All Rights Reserved. All trademarks are owned by Schneider
More informationPSR-SCP- 24DC/SDC4/2X1/B PSR-SPP- 24DC/SDC4/2X1/B
PSR-SCP- 24DC/SDC4/2X1/B PSR-SPP- 24DC/SDC4/2X1/B Safety Relay for Emergency Stop and Safety Door Circuits INTERFACE Data Sheet 102858_02_en PHOENIX CONTACT - 12/2006 Description The PSR-...- 24DC/SDC4/2X1/B
More informationPSR-SCP- 24DC/URM4/4X1/2X2/B PSR-SPP- 24DC/URM4/4X1/2X2/B
Safety Relay as a Contact Extension Block INTERFACE Data Sheet PHOENIX CONTACT - 05/2006 Description The PSR-...- 24DC/URM4/4X1/2X2/B safety relay can be used as a contact extension block in safety circuits
More informationE-STOP relays, safety gate monitors
E-STOP relays, safety gate monitors Up to Category 2, EN 954-1 Unit features Positive-guided relay outputs: 2 safety contacts (N/O), instantaneous Connection options for: E-STOP pushbutton Reset button
More informationEnglish. Operating manual. Limit switch GS125. Keep for future reference. Ventures / brands of GHM
English Operating manual Limit switch GS125 Ventures / brands of GHM www.ghm-messtechnik.de Keep for future reference. Table of contents Page 1. Intended use (areas of application)... 3 1.1 Safety signs
More informationUM NVT2001GM and NVT2002DP demo boards. Document information
Rev. 7 March 202 User manual Document information Info Keywords Abstract Content NVT, voltage translator, level translator, level shift, passive voltage translator, passive level translator, passive level
More informationEL731 PROFIBUS INTERFACE
Tel: +1-800-832-3873 E-mail: techline@littelfuse.com www.littelfuse.com/el731 EL731 PROFIBUS INTERFACE Revision 0-A-032816 Copyright 2016 Littelfuse Startco All rights reserved. Document Number: PM-1011-EN
More informationAssembly and operating instructions DULCOMARIN II, N-Module (Power Supply Module without Relay) DXMaN
Assembly and operating instructions DULCOMARIN II, N-Module (Power Supply Module without Relay) DXMaN Please enter the identity code of your device here! DXMa _ Please carefully read these operating instructions
More informationApplications & Tools. Calculation examples for safety functions according to EN ISO SINUMERIK 840D sl
lcover sheet Calculation examples for safety functions according to EN ISO 13849 SINUMERIK 840D sl Calculation examples for safety functions at horizontal axes October 2013 Applications & Tools Answers
More informationAssembly and Operating Instructions. M2 module for BDC-i440 control units
BDC-i440 M2 en Assembly and Operating Instructions M2 module for BDC-i440 control units Important information for: Fitters / Electricians / Users Please forward accordingly! These instructions must be
More informationSSW5/USB. S5-PLC to USB converter cable US US13. User Manual. Edition 2 / / HW1 and higher
SSW5/USB S5-PLC to USB converter cable 700-750-0US13 700-750-1US13 User Manual Edition 2 / 09.03.2009 / HW1 and higher Order number of manual: 900-750-0US13/en Systeme Helmholz GmbH Hannberger Weg 2 D-91091
More informationCFW-09HD LINE DC LINK POWER SUPPLY
CFW-09HD LINE DC LINK POWER SUPPLY CFW-09HD Line Addendum to the CFW-09 Manual Addendum to the CFW-09 Manual CFW-09HD Line I. GENERAL INFORMATION This addendum has information about the CFW-09HD line
More informationABB i-bus KNX Switch Actuator, Current Detection, x-fold, 16/20 A, C-Load, MDRC SA/S x , 2CDG1101xxR0011
Technical Data 2CDC505082D0203 ABB i-bus KNX Product description Switch Actuators SA/S x.16.6.1, 16/20 A are modular installation devices in ProM design for installation in the distribution board. They
More informationAS-i Safety Relay Output Module with Diagnostic Slave
AS-i Safety Relay Output Module with Diagnostic Slave User Manual...supports the requirements for AS-i Safety up to SIL3 Revision date: 2016-03-9 Subject to modifications without notice. Generally, this
More information