Keysight Technologies UXM GSM/GPRS/EGPRS Application Feature Comparison

Transcription

1 Keysight Technologies UXM Application Feature Comparison January 2017 For more information on the options, part numbers, configuring your UXM instrument, upgrades, and licenses, view the Keysight UXM Wireless Test Set Configuration Guide, literature number EN. Fundamentals Fast switch with TD-SCDMA and W-CDMA 1 Yes Supported cells = 1 Yes GPP frequency bands GSM450, GSM480, GSM750, GSM850, PGSM, EGSM, RGSM, TGSM810, DCS, PCS Yes Cell power Yes MS Tx level Yes Multislot class 10 (4 DL, 2 UL, maximum 5 timeslots) Yes Downlink corruption Yes Trigger output on frame, hyperframe, multiframe Yes Dual device parallel RF test in one UXM 2 Yes Dual IP device test in one UXM (e.g. dual-sim) 2 E7515A-D01, FFP-0P1 Internal applications server E7515A-S Wireshark protocol logging and analysis E7515A-L Requires E7529A TD-SCDMA/HSPA and E7523A W-CDMA/HSPA+ test application licenses. 2. Requires one UXM with two TRX sets.

2 02 Keysight UXM Application Feature Comparison Data Throughput PS data connections -FFP-0P Dual transfer mode (DTM) (CS voice + PS data) -FFP-0P One primary PDP context -FFP-0P IPv4 Yes QoS parameters Yes Data connection types (Auto, BLER, ETSI, SRB) Yes DL and UL modulation coding schemes using GMSK and 8PSK (MCS1 to MCS9) Yes EGPRS incremental redundancy Yes Evolved EDGE RTTI Yes Data throughput monitor - IP -FFP-0P Data throughput monitor - OTA Yes

3 03 Keysight UXM Application Feature Comparison Detailed Network Behavior CS voice page/release Yes Calling party number Yes Paging parameters Yes SMS (MO, MT, cell broadcast) Yes Cell ID parameters Yes Cell parameters Yes Timers and counters Yes MS-reported information Yes Call status results Yes Configurable message replies Yes Network identity and time zone (NITZ) Yes MS registration, GPRS attach/detach Yes PLMN and equivalent PLMN (eplmn) Yes

4 04 Keysight UXM Application Feature Comparison Voice and Connectivity GSM voice connection Yes GSM voice echo Yes GSM voice loopback Yes Authentication Yes Encryption A5/1, A5/3, GEA-1, GEA-2, GEA-3 Yes VAMOS type I, II Yes FS, EFS, HS, AFS, AHS, WFS speech channels Yes FACCH, repeated FACCH, repeated SACCH, SDCCH with combined BCH Yes Signaling-only connection Yes Real-time FS and AFS (AMR) vocoder E7535A-MEUv

5 05 Keysight UXM Application Feature Comparison Handovers and InterRAT Mobility TCH band handover Yes TCH ARFCN handover Yes MS Tx level handover Yes Cell reselection with LTE, W-CDMA, TD-SCDMA 1, 2 Yes Cell reselection with LTE, with PDP active 1, 3 -FFP-0H1, -FFP-0P SRVCC from-lte 1, 3, 4 -FFP-0H CSFB-from-LTE 1, 3 -FFP-0H PS-HO LTE > GPRS/EGPRS 1,3 -FFP-0H1, -FFP-0P MS-reported measurements Yes GSM, UTRAN FDD, UTRAN TDD, E-UTRAN neighbor cells and measurement reports Yes BA table Yes Requires one UXM with two TRX sets, or two UXMs, Main with two TRX sets and Auxiliary with at least one TRX set, plus interconnectivity kit E7515A-AC1. For full details see Keysight UXM Wireless Test Set Configuration Guide, literature number EN. 2. Requires E7530A LTE/LTE-A, E7523A W-CDMA/HSPA+, and/or E7529A TD-SCDMA/HSPA test application(s). 3. Requires E7530A LTE/LTE-A test application with E7530A-FFP-0H1 (and E7530A-FFP-0P1 for LTE IP data). 4. Requires Keysight E6966B IMS-SIP server and/or client.

6 06 Keysight UXM Application Feature Comparison Rx and Tx Measurements Bad frame indication (BFI) (GSM) Yes BER (GSM, GPRS, EGPRS SRB) Yes BLER (GPRS, EGPRS, USF) Yes Data throughput monitor Yes EDGE EVM Yes FER (GSM FACCH, repeated SACCH) Yes GMSK phase and frequency error Yes Output RF spectrum (GMSK, EDGE) Yes Power vs. time (GMSK, EDGE) Yes Transmit power Yes

7 07 Keysight UXM Application Feature Comparison Measurements 3GPP TS Phase error and frequency error Yes Transmitter output power and burst timing Yes Output RF spectrum (ORFS) Yes ORFS for MS supporting the R-GSM or ER-GSM frequency band Yes Frequency error and phase error in GPRS multislot configuration Yes Transmitter output power in GPRS multislot configuration Yes ORFS in GPRS multislot configuration Yes Frequency error and modulation accuracy in EGPRS configuration Yes EGPRS transmitter output power Yes ORFS in EGPRS configuration Yes Bad frame indication Partially Reference sensitivity Partially Usable receiver input level range Partially Minimum input level for reference performance (GPRS) Partially Minimum input level for reference performance (EGPRS) Partially EGPRS usable receiver input level range Partially Supported under static conditions. For more information on the options, part numbers, configuring your UXM instrument, upgrades and licenses, view the Keysight UXM Wireless Test Set Configuration Guide, literature number EN. Rev. January 2017