Advantys STB Application Note

Transcription

1 How to use Advantys STB with a Micrologix DeviceNet scanner 1

2 STB MicroLogix SDN (DeviceNet scanner) 2

3 By using the Advantys configuration software it is very simple to export a configuration specific Island node into RSNetWorx for use with Rockwell masters.the complexity of the island does not matter,whether you have CANext devices such as drives or valve blocks,regular island extensions or HMI words the configured exported file contains all the data with the proper transmission type already chosen. This makes integration a simple export (out of the Advantys Configuration Software) followed by a simple 1 file import (into RSNetWorx) there by saving lots of commissioning and configuration time and effort. 3

4 For this example we used the following Advantys STB hardware 1. NDN2212 Devicenet NIM 2. PDT vdc 3. STBDDI channel discrete input 4. STBDDO channel discrete output 5. STBART channel RTD input 6. STBACO channel 4-20mA output 7. XMP100 termination plate 8. XBE2100 CANext connected via CAN open to the ATV31 VFD 4

5 After assembling the modules in the Advantys Configuration software and performing a successful build, we can now export this configuration as a single file to be placed into RSNetWorx (this same export can be used with other manufacturers masters as well as the Sycon configuration software) Under the edit tab you find the export utility with the name of the Island file you are going to export (in this case the Island is named integration ) 5

6 Now choose a path to export the EDS file to. Some Masters have character limits on the title of an EDS so you can choose to use a short file descriptor Click the ok button and your configuration specific file will export to your designated path 6

7 Start the RSNetworx for Devicenet software 7

8 From the tools bar Choose EDS wizard 8

9 From RS Networx choose The EDS Wizard and register The exported node specific EDS file from the Advantys Configuration software 9

10 Register the EDS as a single File. Browse for the path and Click next 10

11 Here you can change The icon or use defaults 11

12 This will place the node specific EDS file of our sample island into The Communication Adapters Sub folder in the catalog section 12

13 This will check the file for errors Before registering 13

14 From RSNetWorx choose your Scanner Module. In this case we will choose the 1769-SDN for the Micrologix 1500 PLC. The steps that follow would be similar for any other Rockwell Master chosen. 14

15 Now choose the imported EDS file. We know that This configuration had 18 Bytes of input and 10 bytes Of output data 15

16 Double click on the Scanner module And add the Advantys node to the Scan list and you are done 16

17 Here is the output data from our node in word format Above.(The numeration corresponds to the address Of the Advantys modules on the backplane,32 Being the ATV31) 17

18 Here is our input data form our node in word format (the numeration corresponds to the module location on the Advantys backplane,s is for Devicenet status word And 32 is the ATV31) 18

19 Now with your network connected we can go online and download the configuration to the scanner. Your node is ready for use in the PLC program or for online commissioning. 19