Apple WELCOME USER: Support

Transcription

1 Apple WELCOME USER:

2

3

4

5 TAP APP STORE TAP SEARCH TAP SEARCH FIELD AND KEY IN THE NAME OR SUBJECT OF THE REQUIRED APP TAP SEARCH CONT. TO STEP 5-7

6 TAP THE REQUIRED APP TAP "GET" AND FOLLOW THE INSTRUCTIONS ON THE SCREEN TO INSTALL THE APP SLIDE YOUR FINGER UPWARDS STARTING FROM THE BOTTOM OF THE SCREEN TO RETURN TO THE HOME SCREEN

7 Apple WELCOME USER:

8

9

10

11 HOW TO STOP YOUR APPLE TV FROM GOING TO SLEEP ON ANY APPLE TV MODEL, GO TO SETTINGS GENERAL SLEEP AFTER AND CHANGE THE DELAY BEFORE SLEEP STARTS FROM ONE HOUR TO NEVER. THIS WILL ENSURE THAT YOUR DEVICE IS AWAKE UNTIL YOU MANUALLY PUT IT TO SLEEP. YOU CAN WAKE THE DEVICE FROM SLEEP BY PRESSING ANY BUTTON ON ITS REMOTE. A SMALL LIGHT ON THE FRONT OF THE APPLE TV WILL GLOW WHEN IT'S ON. NOTE THAT THE APPLE TV SOFTWARE LETS YOU SELECT BETWEEN OTHER BUILT-IN SLEEP DELAYS: 15 MINUTES, 30 MINUTES, ONE HOUR, FIVE HOURS AND TEN HOURS.

12 HOW TO RESTART 4TH GENERATION APPLE TV USING SIRI REMOTE: HOLD DOWN THE MENU AND HOME BUTTONS ON THE SIRI REMOTE, THEN RELEASE WHEN THE LED ON YOUR APPLE TV STARTS FLASHING. FROM THE SETTINGS MENU: GO TO SETTINGS SYSTEM RESTART. HOW TO RESTART 2ND AND 3RD GENERATION APPLE TV USING APPLE REMOTE: HOLD DOWN THE MENU AND DOWN BUTTONS ON YOUR APPLE REMOTE (ALUMINUM OR WHITE) FOR ABOUT SIX SECONDS, THEN RELEASE WHEN THE LED ON YOUR APPLE TV STARTS FLASHING. FROM THE SETTINGS MENU: GO TO SETTINGS GENERAL RESTART. HOW TO PUT 4TH GENERATION APPLE TV INTO SLEEP OR STANDBY MODE USING SIRI REMOTE: PRESS AND HOLD THE HOME BUTTON, THEN SELECT SLEEP. FROM THE SETTINGS MENU: GO TO SETTINGS GENERAL SLEEP NOW.

13 HOW TO PUT 4TH GENERATION APPLE TV INTO SLEEP OR STANDBY MODE USING SIRI REMOTE: PRESS AND HOLD THE HOME BUTTON, THEN SELECT SLEEP. FROM THE SETTINGS MENU: GO TO SETTINGS GENERAL SLEEP NOW. HOW TO PUT 2ND AND 3RD GENERATION APPLE TV INTO SLEEP OR STANDBY MODE USING APPLE REMOTE: GO TO THE HOME SCREEN AND HOLD DOWN PLAY/PAUSE ON YOUR APPLE REMOTE (ALUMINUM OR WHITE) FOR ABOUT FIVE SECONDS. FROM THE SETTINGS MENU: GO TO SETTINGS SLEEP NOW. WAKING FROM SLEEP AND SLEEP SETTINGS YOU CAN ALSO PUT YOUR APPLE TV INTO SLEEP MODE BY SHUTTING OFF YOUR TELEVISION OR RECEIVER. IN ADDITION, R APPLE TV GOES TO SLEEP AFTER A PREDETERMINED PERIOD OF INACTIVITY. TO SET THE DELAY BEFORE SLEEP STARTS, GO TO SETTINGS GENERAL SLEEP AFTER AND CHOOSE HOW OFTEN THE DEVICE SLEEPS: AFTER 15 MINUTES, 30 MINUTES, ONE HOUR, FIVE HOURS, TEN HOURS OR NEVER. TO WAKE THE APPLE TV FROM SLEEP, JUST PRESS ANY BUTTON ON ITS REMOTE. A SMALL LIGHT ON THE FRONT OF THE DEVICE SHOULD GLOW AND WHATEVER WAS LAST VISIBLE SHOULD REAPPEAR ON YOUR TELEVISION SET.

14 HOW TO USE A THIRD-PARTY REMOTE TO CONTROL YOUR APPLE TV Although the Apple TV's remote control looks sleek, it leaves a lot to be desired. The tiny buttons on the awkward-shaped directional pad can make it difficult to browse through itune's library of thousands of movies and TV shows. As you know, you can easily replace the remote with your iphone using Apple's Remote app. But did you know there's another option? You can control your Apple TV with a third-party remote. And it's actually fairly easy to setup If you have a universal remote, like one that came with your TV or cable/satellite box, you can perform these easy steps to program it to run your Apple TV. That way if you ever misplace your Apple remote, you'll have a backup ready to go. Step 1. Turn on your Apple TV, and navigate to Settings > Remotes > Learn Remote Step 2. Select an unused device setting on your universal remote (for example, I used Aux on my Comcast cable remote). Step 3. Click Start on your Apple TV to start the remote learning process. And that's it, that's all there is to it. The software on your ATV will guide you through a few simple button presses that will have your universal remote programmed in no time. Remember, the Apple TV's sensor is infrared, so you'll need to point your remote directly at it for it to work.

15

16

17

18