This symbol points out hazards that can lead to non-functional configurations, data loss, equipment damage or even personal injury

Transcription

1 PRACTICAL EXERCISE Exercise Exercise number 3 Objective for the basic configuration of the system Target time 10 minutes Release September 2011 Pages 5 This exercise uses the Wizard based for basic configuration of the system. The covers the following items: Set Date and Time Set Storage System Name Change Password Setup Network Environment Writing conventions... 1 Login Quiz... 5 Writing conventions This symbol points out hazards that can lead to non-functional configurations, data loss, equipment damage or even personal injury This symbol followed by smaller text highlights important background information and tips Text output = [Text output] is used to show screen content of a character based display <Date> = "smaller than" and "greater than" signs are used to show variables which are to be replaced by actual values. "Menu Item"= Commands, menu items, names of buttons, options, variables, file names and path names. [Key] = Keyboard input is shown in square brackets.

2 Technology Solutions Page 2 / 5 Login The following assumes that the is connected to the mains and switched on with both POWER and READY LEDs on the front panel lit green. 1) We will login using the default username "root" with password "root". 2) The Storage System Status opens. We choose from the "Easy Setup" menu the option "". 3) The Storage System Status opens. We choose from the "Easy Setup" menu the option "". 4) This brings us to the Start of the Initial Setup, click "Next" to continue.

3 Technology Solutions Page 3 / 5 5) In the Set Date and Time screen we choose the following settings: Date/Time Information: Change date and time if necessary Time zone: <Your Time Zone>. Daylight Saving Time: If you enable the functionality you have two options for entering the start and end dates (in this exercise "by day of the week" is chosen) NTP Service: NTP disabled (an NTP server can be used for time synchronization) 6) Click on "Next" to continue and click "OK" 7) In the screen we make the following settings: Name: Training (this name is used within the Management Software to refer to this Storage System) Installation Location: Classroom (in practice could tell for example the room in the building) Administrator: My Self (in practice could also include a telephone number of the Administrator) Description: ETERNUS Training Equipment (in practice could for example describe the main usage purpose of the system) 8) Click on "Next" to continue and click "OK"

4 Technology Solutions Page 4 / 5 9) In the Change Password we can change the default password of the user to something more secure, however for our purposes it is better to leave the password unchanged. 10) Click on "Skip" to continue. If you click on "Next" without filling in the fields, you will get an error message, likewise if the new password does not fulfill the password conditions. 11) In the Setup Network Environment screen we make the following settings: Select Network Port: MNT (keep the default). Speed and Duplex: Auto Negotiation Master IP Address: (keep the default) Subnet Mask: (keep the default) 12) Click on "Next" to continue and click "OK" 13) That brings us to the end of the Initial Setup. If you are running the for the first time, the system logs you out and asks to restart the browser. If the is not run for the first one remains logged in. This brings us to the end of the Initial Setup; please continue with the exercise "Configuration Wizard".

5 Technology Solutions Page 5 / 5 Quiz QUESTION 1: What are the minimum and maximum character lengths for the ETERNUS user password? QUESTION 2: What is the setting "Allowed IP List" for? All rights reserved, including intellectual property rights. Technical data subject to modifications and delivery subject to availability. Any liability that the data and illustrations are complete, actual or correct is excluded. Designations may be trademarks and/or copyrights of the respective manufacturer, the use of which by third parties for their own purposes may infringe the rights of such owner. Copyright 2011 APAC Limited Integration Support Centre Sydney iss@au.fujitsu.com CEMEA&I North America Technology Solutions Training Academy training@ts.fujitsu.com