Building Professional Services
|
|
- Silvester Hardy
- 5 years ago
- Views:
Transcription
1 Building Professional Services How to create Drawings from your models using Bentley Building Electrical Systems and the USACE Dataset: The Electrical Discipline Master Model: The Discipline Master Model is simply a file that references all of the files in your project that pertain to your discipline. It has 2 main uses: First, it is the only file that the other disciplines will reference in order to see the Electrical work. Second, it is where we will generate our 2d drawings or extractions from the 3D model that we have just built. Create a discipline master model in your discipline: 1. Create a new file. Name the file per the standards that the USACE District office you are working for has provided to you. The file naming standards can also be found in the 09Q4a version of the dataset in the Excel file: \Con_Docs\_Standards\Proj_Stds\data\BIMNamingMatrix_ xls 2. Reference all the electrical design models into the file. This will include all floors of the Lighting, Power, Systems and Grounding models. If you have multiple buildings you should create a separate Discipline master for each building. You should only reference the electrical files into the Electrical Discipline Master Model. Do not reference any of the other Disciplines. Import the USACE levels into the Discipline Master file: 1. Import the Electrical, Telecommunications and Fire Protection level dgn libraries: Open Level Manager using the Icon in the Primary Tool Bar. In the Level Manager Dialog, Choose Levels, Import in the menu. The Import Levels dialog will open. Page 1 of 20
2 Browse to the location of the USACE level dgn libraries. The Level DGN Libraries are stored in the USACE workspace Standards folder. This may be on a different drive from your project. They will be in the: \USACE_Dataset_09Q4a\Workspace\Standards\dgnlib\ folder. Talk to your BIM Manager to find the exact location at your site. Select the USACE_Electrical.dgnlib file and click Open. The Level/Filter Import Dialog will open. In the Level/Filter Import dialog, the levels in the selected dgn library are selected. Click OK to import all of the levels into your Discipline Master Model. Repeat the import steps for the USACE_Telecommunications.dgnlib and the USACE_Fire_Protection.dgnlib files. Now that you have all of these levels imported, your drawings should extract to the correct levels. Because these levels are unused in the Discipline Master Model, you will need to re import them if you compress this file. Page 2 of 20
3 Drawing Extraction Manager: Create an Extraction Drawing Definition for a Lighting, Power or Telecommunications Plan: 1. Open your discipline master model. 2. Open the Drawing Extraction Manager. In both XM and v8i, this tool is located in the Drawing Manager category of the tasklist. In XM, it is also available from the Drawings tool bar in the Triforma Menu. Page 3 of 20
4 In v8i, it is also available from the Project Management menu, under Drawing Manager, DEM Main Toolbar. 3. The dialog that opens is the Drawing Extraction Manager: 4. Click on the Create a Drawing Definition Icon (It s the first icon in the toolbar across the top of the dialog.) 5. The Section Template Dialog will open. Choose USACE Lighting Plan or USACE Power Plan (There is no real difference except for the name) and click OK. Page 4 of 20
5 6. The Edit Drawing Definition dialog will open. The General tab, along the left hand side of the dialog, is active. On this tab, you will provide a name and description for the extraction s drawing definition. The extraction will create a file that will have the same name as the drawing definition. Change the name to an appropriate name base on the USACE file naming standards. Highlight the name, right click and choose copy. We will need the name again later in the process. Enter a description for the Lighting Plan. The Drawing Output Directory should be set to $(TF_DRAWINGS). This is a configuration variable that points to the Electrical Extractions folder. Pick the Annotation Scale for the scale of the final drawing that you want to create. Page 5 of 20
6 7. On the left hand side of the dialog, click on the Region Tab. The Region tab controls the location of the cut plane that is used to generate the extraction: Choose Distance & Orientation. Set the height so that it is completely above the items that you want to include in your extraction. Set the orientation as Top. In the Forward View Distance: enter enough distance to include everything that you want in your extraction from the cut plan looking forward. You must make sure that all electrical elements are between the cut line and the forward view distance line or they will not display on your extraction properly. Page 6 of 20
7 8. Click on the Participants tab. The Participants tab controls which elements to include in the extraction. Our 2 choices are to include only the active file (Process Master File Only) or to include a set of reference files (Process a Reference Group Model). Since there are no elements in the Discipline Master Model, we will always choose Process a Reference Group Model. Choose Process a Reference Group Model. Click on New. In the Group Model Dialog, click in the Name field, then rightclick and choose Paste. This will paste in the name of the extraction that we saved earlier. Naming the Group Model the same as the extraction is a good idea as you start out working with extractions. Give your reference a Description. This should probably be the same as your extraction description. Press OK. This will create a new model in the Discipline Master Model that contains the same reference files as the Default Model. Page 7 of 20
8 Click on the Open button. This will open the newly created Reference Group Model. o Whenever you have a reference group model open, the Attention! dialog will appear. This dialog just alerts you that you are not in the master model. o The Reference Group model is only used to set the reference files and levels to use in the extraction. Do not add any geometry to the file. In the reference group model, use the reference file dialog to turn off any reference files that you do not want to include in this extraction. o This will include the second floor files, if you are doing a first floor extraction. o Turn off power models for lighting plans. In the Level Display dialog box, turn off any levels that you do not want to include in the extraction. In electrical extractions this always includes: o Turn off clearances: BES CLEARANCE1 and BES CLEARANCE2 o Turn off any temporary geometry: BES INFOLINE (centerlines of raceways), BES CLINE (construction lines) & BES PREVIEW (temporary previews of elements) o Save settings in the file, either through the menu, File, Save Settings or Press Ctrl+F. Back on the Edit Drawing Definition dialog, click on the Return to Master Button to return to the master model. If you saved settings while in the Reference Group Model, then save settings again after you return to the Main Model. This is important because the save settings command will make the active model the default model for the file and the next time you open this file, it will open into the last model that you saved settings in. Page 8 of 20
9 9. Click on the Cut Plane View tab. Since we placed the cut plane above all of the symbols in our model, there are no symbols being cut so this tab is not important. 10. Click on the Forward View tab. The critical thing on this tab is the Compound Cell Plan Symbols check box. This will tell the extraction to only display the 2D part of compound cells. Since all of the symbols that we placed in our models are compound cells, this is very important. 11. Click on the Reflected View tab. This tab is only used by the Architects to generate their reflected ceiling plans. We will not be using it in Electrical extractions. Page 9 of 20
10 12. Click on the Output Tab: The settings on this tab are set for you in the template you selected earlier. 13. Click on the Preferences Tab: On this tab, it is important that Never Hide Text / Spaces is turned on if you are using a filled font(like Arial) for your subtype and circuit number labels. If this is not on, the filled fonts will be drawn as outlines. 14. Click on the Architecture Tab: This tab contains settings only for the Architects and is not used in BBES. Page 10 of 20
11 15. On the upper left hand corner of the Edit Drawing Definition dialog, click on Save. 16. Select your Extraction Definition in the Drawing Extraction Manager List and click on the Calculate All button in the upper right hand corner of the dialog. (It looks like a pencil on a drafting board.) 17. Your drawing will now be created and saved into the extractions folder for your discipline. A preview of the drawing will open in View 8. You can open the Drawing by clicking on the Open button. (It looks like an opening folder.) Page 11 of 20
12 Create an Extraction Drawing Definition for Electrical Room Elevation: 1. Open your discipline master model. 2. Open the Drawing Extraction Manager. In both XM and v8i, this tool is located in the Drawing Manager category of the tasklist. In XM, it is also available from the Drawings tool bar in the Triforma Menu. Page 12 of 20
13 In v8i, it is also available from the Project Management menu, under Drawing Manager, DEM Main Toolbar. 3. The dialog that opens is the Drawing Extraction Manager: 4. Click on the Create a Drawing Definition Icon (It s the first icon in the toolbar across the top of the dialog.) 5. The Section Template Dialog will open. Choose USACE Electrical Room Elevation and click OK. Page 13 of 20
14 6. The Edit Drawing Definition dialog will open. The General tab, along the left hand side of the dialog, is active. On this tab, you will provide a name and description for the extraction s drawing definition. The extraction will create a file that will have the same name as the drawing definition. Change the name to an appropriate name base on the USACE file naming standards. Highlight the name, right click and choose copy. We will need the name again later in the process. Enter a description for the Electrical Room elevation. The Drawing Output Directory should be set to $(TF_DRAWINGS). This is a configuration variable that points to the Electrical Extractions folder. Pick the Annotation Scale for the scale of the final drawing that you want to create. Page 14 of 20
15 7. Skip over the Region tab, for now. 8. Click on the Participants tab. The Participants tab controls which elements to include in the extraction. Our 2 choices are to include only the active file (Process Master File Only) or to include a set of reference files (Process a Reference Group Model). Since there are no elements in the Discipline Master Model, we will always choose Process a Reference Group Model. Choose Process a Reference Group Model. Click on New. In the Group Model Dialog, click in the Name field, then rightclick and choose Paste. This will paste in the name of the extraction that we saved earlier. We will reuse this Group Model for all 4 of the elevation extractions in this room. Give your Group Model a Description. Start the description with Group Model for. Press OK. This will create a new model in the Discipline Master Model that contains the same reference files as the Default Model. Page 15 of 20
16 Click on the Open button. This will open the newly created Reference Group Model. o Whenever you have a reference group model open, the Attention! dialog will appear. This dialog just alerts you that you are not in the master model. o The Reference Group model is only used to set the reference files and levels to use in the extraction. Do not add any geometry to the file. In the reference group model, use the reference file dialog to attach the other Discipline Master Models that will need to be seen in your extraction. This will always include Architecture; Structural and Mechanical are only needed if they are exposed in the Electrical Room. o Use Live Nesting with a depth of 99 In the reference group model, use the reference file dialog to turn off any reference files that you do not want to include in this extraction. o This will include the second floor files, if you are doing a first floor extraction. In the Level Display dialog box, turn off any levels that you do not want to include in the extraction. o In electrical extractions this always includes: Turn off clearances: BES CLEARANCE1 and BES CLEARANCE2 Turn off any temporary geometry: BES INFOLINE (centerlines of raceways), BES CLINE (construction lines) & BES PREVIEW (temporary previews of elements) o Save settings in the file, either through the menu, File, Save Settings or Press Ctrl+F. 9. We will now create a shape in the Reference Group Model that will establish the cut plane for the extraction. Use the Floor Selector to set the correct ACS plan for your electrical room. Start the Place Block command from the Drawing task list. Change the placement method to Rotated. In the top view, 2 points to define the extent of the cut plane In a 3 D or Elevation view, define a third point to extrude the line to a shape. (You will have to rotate the accudraw cursor place the 3 rd point.) Page 16 of 20
17 10. On the left hand side of the dialog, click on the Region Tab. The Region tab controls the location of the cut plane that is used to generate the extraction: Choose Shape(s) Click on Define In the Model, Select the shape that you defined in the previous step. In the Forward View Distance: enter enough distance to include everything that you want in your extraction from the cut plan looking forward. You must make sure that all electrical elements are between the cut line and the forward view distance line or they will not display on your extraction properly. Back on the Edit Drawing Definition dialog, click on the Participants tab and then click on the Return to Master Button to return to the master model. If you saved settings while in the Reference Group Model, then save settings again after you return to the Main Model. This is important because the save settings command will make the active model the default model for the file and the next time you open this file, it will open into the last model that you saved settings in. Page 17 of 20
18 11. Click on the Cut Plane View tab. Since we placed the cut plane above all of the symbols in our model, there are no symbols being cut so this tab is not important. 12. Click on the Forward View tab. The critical thing on this tab is the Compound Cell Plan Symbols check box. This will tell the extraction to only display the 2D part of compound cells. Since all of the symbols that we placed in our models are compound cells, this is very important. 13. Click on the Reflected View tab. This tab is only used by the Architects to generate their reflected ceiling plans. We will not be using it in Electrical extractions. Page 18 of 20
19 14. Click on the Output Tab: The settings on this tab are set for you in the template you selected earlier. 15. Click on the Preferences Tab: On this tab, it is important that Never Hide Text / Spaces is turned on if you are using a filled font(like Arial) for your subtype and circuit number labels. If this is not on, the filled fonts will be drawn as outlines. 16. Click on the Architecture Tab: This tab contains settings only for the Architects and is not used in BBES. Page 19 of 20
20 17. On the upper left hand corner of the Edit Drawing Definition dialog, click on Save. 18. Select your Extraction Definition in the Drawing Extraction Manager List and click on the Calculate All button in the upper right hand corner of the dialog. (It looks like a pencil on a drafting board.) 19. Your drawing will now be created and saved into the extractions folder for your discipline. A preview of the drawing will open in View 8. You can open the Drawing by clicking on the Open button. (It looks like an opening folder.) Page 20 of 20
Building Mechanical Systems
Building Mechanical Systems Creating custom Air Handling Units and placing them in your models: Creating devices such as air handling units (AHU) requires a few extra steps compared to simply adding items
More information3 AXIS STANDARD CAD. BobCAD-CAM Version 28 Training Workbook 3 Axis Standard CAD
3 AXIS STANDARD CAD This tutorial explains how to create the CAD model for the Mill 3 Axis Standard demonstration file. The design process includes using the Shape Library and other wireframe functions
More informationPlacing Spaces. Let Me Try! Before you begin. The following files are needed for this Let Me Try exercise: M_c04_archi_spaces_rmp2015.
Placing Spaces Before you begin The following files are needed for this Let Me Try exercise: For Imperial: For Metric: c04_archi_spaces_2016.rvt M_c04_archi_spaces_rmp2015.rvt To access the files from
More informationInventor 201. Work Planes, Features & Constraints: Advanced part features and constraints
Work Planes, Features & Constraints: 1. Select the Work Plane feature tool, move the cursor to the rim of the base so that inside and outside edges are highlighted and click once on the bottom rim of the
More informationIn this exercise, you will convert labels into geodatabase annotation so you can edit the text features.
Instructions: Use the provided data stored in a USB. For the report: 1. Start a new word document. 2. Follow an exercise step as given below. 3. Describe what you did in that step in the word document
More informationWork Smart: Microsoft Office 2010 User Interface
About the Office 2010 User Interface You can use this guide to learn how to use the new features of the Microsoft Office Ribbon. Topics in this guide include: What s New in the Office 2010 User Interface
More informationExcel The primary replacement for menus and toolbars in Office Excel 2007 is the Ribbon. Designed for easy browsing, the
Excel 2007 Office Fluent user interface The primary replacement for menus and toolbars in Office Excel 2007 is the Ribbon. Designed for easy browsing, the Ribbon consists of tabs that are organized around
More information11.1 Create Speaker Notes Print a Presentation Package a Presentation PowerPoint Tips... 44
Contents 1 Getting Started... 1 1.1 Presentations... 1 1.2 Microsoft Office Button... 1 1.3 Ribbon... 2 1.4 Mini Toolbar... 2 1.5 Navigation... 3 1.6 Slide Views... 4 2 Customize PowerPoint... 5 2.1 Popular...
More informationMicrosoft PowerPoint 2007 Tutorial
Microsoft PowerPoint 2007 Tutorial Prepared By:- Mohammad Murtaza Khan I. T. Expert Sindh Judicial Academy Contents Getting Started... 5 Presentations... 5 Microsoft Office Button... 5 Ribbon... 6 Quick
More information1 THE PNP BASIC COMPUTER ESSENTIALS e-learning (MS Powerpoint 2007)
1 THE PNP BASIC COMPUTER ESSENTIALS e-learning (MS Powerpoint 2007) 2 THE PNP BASIC COMPUTER ESSENTIALS e-learning (MS Powerpoint 2007) TABLE OF CONTENTS CHAPTER 1: GETTING STARTED... 4 MICROSOFT OFFICE
More informationProducing Project Deliverables: Creating a Plan Set
Practice Workbook This workbook is designed for use in Live instructor-led training and for OnDemand selfstudy. The explanations and demonstrations are provided by the instructor in the classroom, or in
More informationME009 Engineering Graphics and Design CAD 1. 1 Create a new part. Click. New Bar. 2 Click the Tutorial tab. 3 Select the Part icon. 4 Click OK.
PART A Reference: SolidWorks CAD Student Guide 2014 2 Lesson 2: Basic Functionality Active Learning Exercises Creating a Basic Part Use SolidWorks to create the box shown at the right. The step-by-step
More informationMemo Block. This lesson includes the commands Sketch, Extruded Boss/Base, Extruded Cut, Shell, Polygon and Fillet.
Commands Used New Part This lesson includes the commands Sketch, Extruded Boss/Base, Extruded Cut, Shell, Polygon and Fillet. Click File, New on the standard toolbar. Select Part from the New SolidWorks
More informationPlacing Air Terminals
Placing Air Terminals Before you begin The following files are needed for this Let Me Try exercise: For Imperial: For Metric: c05_office-space_tut1.rvt M_ c05_office-space_tut1.rvt To access the files
More informationTo change the shape of a floating toolbar
Modifying toolbars You can change the size of toolbar buttons and reposition, add, or delete toolbar buttons. You can also change the toolbar name and turn tooltips on and off. An important item to note-
More informationAECOsim Building Designer Architecture - Parametric Cell Studio
AECOsim Building Designer Architecture - Parametric Cell Studio V8i (metric) SELECTseries 3 Bentley Institute Course Guide TRN019360-1/0001 Trademarks AccuDraw, Bentley, the B Bentley logo, MDL, MicroStation
More information6 Cells. When you have completed this chapter, you will be able to:
6 Cells Designs are often repetitive, we may use the same group of elements many times over. For example, we may need to place a thousand identical seats in a theatre, each seat comprised of a number of
More informationIntroduction to SolidWorks Basics Materials Tech. Wood
Introduction to SolidWorks Basics Materials Tech. Wood Table of Contents Table of Contents... 1 Book End... 2 Introduction... 2 Learning Intentions... 2 Modelling the Base... 3 Modelling the Front... 10
More informationExercise 1. Section 2. Working in Capture
Exercise 1 Section 1. Introduction In this exercise, a simple circuit will be drawn in OrCAD Capture and a netlist file will be generated. Then the netlist file will be read into OrCAD Layout. In Layout,
More informationAECOsim Building Designer. Quick Start Guide. Introduction Getting Started Bentley Systems, Incorporated.
AECOsim Building Designer Quick Start Guide Introduction Getting Started 2012 Bentley Systems, Incorporated www.bentley.com/aecosim Table of Contents Introduction Getting Started...3 AECOsim Building Designer
More informationCreating Labels using Label Designer
Creating and setting up a Single Spine Label Template. Creating Labels using Label Designer 1. Click on the Label Designer wizard found under Common Tasks in the Tech Toolbar. A listing of saved templates
More informationChapter 4 Printing and Viewing a Presentation Using Proofing Tools I. Spell Check II. The Thesaurus... 23
PowerPoint Level 1 Table of Contents Chapter 1 Getting Started... 7 Interacting with PowerPoint... 7 Slides... 7 I. Adding Slides... 8 II. Deleting Slides... 8 III. Cutting, Copying and Pasting Slides...
More informationPowerPoint 2002 Manual
PowerPoint 2002 Manual Internet and Technology Training Services Miami-Dade County Public Schools Contents How to Design Your Presentation...3 PowerPoint Templates...6 Formatting Your Slide Show...7 Creating
More informationAnimation Basics. Learning Objectives
Animation Basics Learning Objectives After completing this chapter, you will be able to: Work with the time slider Understand animation playback controls Understand animation and time controls Morph compound
More informationUsing Annotation Sets Part 3 TIP TUTORIAL. Using Annotation Sets Part 3
TIP TUTORIAL Using Annotation Sets Part 3 INTRODUCTION In Annotation Sets Part 3 you will learn how to work with annotation sets. An annotation set is basically a collection of defaults and layers, which
More informationPowerPoint Basics (Office 2000 PC Version)
PowerPoint Basics (Office 2000 PC Version) Microsoft PowerPoint is software that allows you to create custom presentations incorporating text, color, graphics, and animation. PowerPoint (PP) is available
More informationThe American University in Cairo. Academic Computing Services. Excel prepared by. Maha Amer
The American University in Cairo Excel 2000 prepared by Maha Amer Spring 2001 Table of Contents: Opening the Excel Program Creating, Opening and Saving Excel Worksheets Sheet Structure Formatting Text
More informationWelcome to MicroStation
Welcome to MicroStation Module Overview This module will help a new user become familiar with the tools and features found in the MicroStation design environment. Module Prerequisites Fundamental knowledge
More informationPowerPoint X. 1. The Project Gallery window with the PowerPoint presentation icon already selected. 2. Click on OK.
PowerPoint X Launching PowerPointX 1. Start PowerPointX by clicking on the PowerPoint icon in the dock or finding it in the hard drive in the Applications folder under Microsoft PowerPoint. PowerPoint
More informationWord 3 Microsoft Word 2013
Word 3 Microsoft Word 2013 Mercer County Library System Brian M. Hughes, County Executive Action Technique 1. Insert a Text Box 1. Click the Insert tab on the Ribbon. 2. Then click on Text Box in the Text
More informationPublication Number spse01695
XpresRoute (tubing) Publication Number spse01695 XpresRoute (tubing) Publication Number spse01695 Proprietary and restricted rights notice This software and related documentation are proprietary to Siemens
More informationPADS-PowerPCB 4 Tutorial (with Blazeroute)
PADS-PowerPCB 4 Tutorial (with Blazeroute) PADS-PowerPCB is the ultimate design environment for complex, high-speed printed circuit boards. PROCEDURE FOR SIMULATION IN SCHEMATICS 1. Importing Design Data
More informationAutodesk REVIT (Architecture) Mastering
Autodesk REVIT (Architecture) Mastering Training details DESCRIPTION Revit software is specifically built for Building Information Modeling (BIM), empowering design and construction professionals to bring
More informationCreating Printed Output
Creating Printed Output Module Overview This module will help you to become familiar with the options that let you produce quality printed output. Module Prerequisites Fundamental knowledge of the Microsoft
More informationAUTODESK FUSION 360 Designing a RC Car Body
AUTODESK FUSION 360 Designing a RC Car Body Abstract This project explores how to use the sculpting tools available in Autodesk Fusion 360 Ultimate to design the body of a RC car. John Helfen john.helfen@autodesk.com
More informationUsing the Markup Commands
Using SoftPlan review 1 Using the Markup Commands The Markup menu supplies various commands that allow you to add changes, comments, and suggestions to a drawing or to specific areas of a drawing. To open
More informationPLAY VIDEO. 2. Select Cell Library File menu > New item to display the Create Cell Library dialog.
Chapter 12 Cells PLAY VIDEO INTRODUCTION A cell is a group of elements combined into one complex element and stored in a cell library or in your design file as a shared cell. Any cell can be easily recalled
More informationOrganizing Design Data
Organizing Design Data Module Overview This module explains how to use the data in different files for reference purposes. Module Prerequisites Knowledge of MicroStation s interface Some knowledge about
More informationLESSON 2 MODELING BASICS
LESSON 2 MODELING BASICS In this lesson we ll start to model a multi-story office building from scratch. We ll construct the base grid, create the two towers and place slabs between the stories. Also we
More informationParametric Modeling Design and Modeling 2011 Project Lead The Way, Inc.
Parametric Modeling Design and Modeling 2011 Project Lead The Way, Inc. 3D Modeling Steps - Sketch Step 1 Sketch Geometry Sketch Geometry Line Sketch Tool 3D Modeling Steps - Constrain Step 1 Sketch Geometry
More informationSoCAL Bentley Bash June 17 th 18 th
Wrap it Up with MicroStation V8i Select Series 3 Steven Rick Bentley Systems, Inc. This is a workshop that puts together a number of different technologies in MicroStation to get your drawings to the delivery
More informationTRAINING SESSION Q2 2016
There are 8 main topics in this training session which focus on the Sketch tools in IRONCAD. Content Sketch... 2 3D Scene Background Settings... 3 Creating a new empty Sketch... 4 Foam with cut out for
More informationWeb Publishing Basics II
Web Publishing Basics II Jeff Pankin Information Services and Technology Table of Contents Course Objectives... 2 Create a Site Definition... 3 The Dreamweaver CS4 Interface... 4 Panels are groups of icons
More informationChapter 2 Using Slide Masters, Styles, and Templates
Impress Guide Chapter 2 Using Slide Masters, Styles, and Templates OpenOffice.org Copyright This document is Copyright 2007 by its contributors as listed in the section titled Authors. You can distribute
More informationNauticom NetEditor: A How-to Guide
Nauticom NetEditor: A How-to Guide Table of Contents 1. Getting Started 2. The Editor Full Screen Preview Search Check Spelling Clipboard: Cut, Copy, and Paste Undo / Redo Foreground Color Background Color
More informationIntroduction to Autodesk Revit Structure
11/30/2005-5:00 pm - 6:30 pm Room:N. Hemispheres (Salon E2) (Dolphin) Walt Disney World Swan and Dolphin Resort Orlando, Florida Nicolas Mangon - Autodesk SD35-1 This year, Autodesk is introducing the
More informationExercise Guide. Published: August MecSoft Corpotation
VisualCAD Exercise Guide Published: August 2018 MecSoft Corpotation Copyright 1998-2018 VisualCAD 2018 Exercise Guide by Mecsoft Corporation User Notes: Contents 2 Table of Contents About this Guide 4
More informationCreating a PCB Design with OrCAD PCB Editor
Creating a PCB Design with OrCAD PCB Editor This guide is focused on learning how to create a PCB (Printed Circuit board) design. The guide will make use of the PCB Flow menu that is part of this workshop
More informationVision Pointer Tools
Vision Pointer Tools Pointer Tools - Uses Pointer Tools can be used in a variety of ways: during a Vision Demo to annotate on the master station s screen during a Remote Control session to annotate on
More informationTRAINING GUIDE FOR ADVANCE STEEL USERS
TRAINING GUIDE FOR ADVANCE STEEL USERS Page 2 An Introduction to the Guide... 9 1 Welcome...11 1.1 Autodesk Revit...12 1.2 New in Revit 2018...13 2 Installation...14 2.1 System Requirements and License...15
More informationSince you can designate as many symbols as needed as baseline symbols it s possible to show multiple baselines with unique symbology.
In this lesson you will learn how to: Tutorials Lesson 17 - Work with a Baseline Set up the symbols and bars used to display a baseline using the Baseline Setup Wizard. Insert a baseline. Highlight, lock
More informationTutorial Second Level
AutoCAD 2018 Tutorial Second Level 3D Modeling Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn
More informationLesson 5: Board Design Files
5 Lesson 5: Board Design Files Learning Objectives In this lesson you will: Use the Mechanical Symbol Editor to create a mechanical board symbol Use the PCB Design Editor to create a master board design
More informationThe CAP Panel Builder technology is designed to construct and manage configurations of stack panel products.
About The CAP technology is designed to construct and manage configurations of stack panel products. Use the intuitive to assemble the components and control properties of stackable panels such as top
More informationChapter 4 Feature Design Tree
4-1 Chapter 4 Feature Design Tree Understand Feature Interactions Use the FeatureManager Design Tree Modify and Update Feature Dimensions Perform History-Based Part Modifications Change the Names of Created
More informationTutorials. Lesson 3 Work with Text
In this lesson you will learn how to: Add a border and shadow to the title. Add a block of freeform text. Customize freeform text. Tutorials Display dates with symbols. Annotate a symbol using symbol text.
More informationPowerPoint 2010 Level 1 Computer Training Solutions Student Guide Version Revision Date Course Length
Level 1 Computer Training Solutions Version 1.2 Revision Date Course Length 2012-Feb-16 6 hours Table of Contents Quick Reference... 3 Frequently Used Commands... 3 Manitoba ehealth Learning Management
More informationPowerPoint Launching PowerPointX
PowerPoint 2004 Launching PowerPointX 1. Start PowerPoint by clicking on the PowerPoint icon in the dock or finding it in the hard drive in the Applications folder under Microsoft Office 2004. PowerPoint
More informationCreating 3D Text with LibreOffice
Creating 3D Text You probably have seen examples of 3D text and perhaps wondered how it can be done. As with most computer graphics, there are a lot of programs that can do 3D modeling. However, there
More informationChapter 11: Going All Out with FrontPage
Chapter 11: Going All Out with FrontPage Creating a Product Page Easy Web Design project, Chapter 11 Most store sites need at least one product page. On the Notebooks Web site, the Products page is divided
More information3D AUTOCAD. The view we ve been working in is a top or plan view. From this view even a 3D drawing will appear 2D.
3D AUTOCAD Thus far, we ve looked at tools and operations in 2D with work completed on only the X- and Y- axes. The axes symbol has been present on our screen but we haven t had much use for it. The view
More informationAutodesk Revit 6. Preview Guide. Contents
Autodesk Revit 6 Preview Guide Contents Contents... 1 Welcome to Autodesk Revit... 3 About This Guide... 3 Autodesk Revit Terms... 3 What s New for 6.0... 4 Multi-user Element Borrowing... 4 Design Options...
More informationDeveloper s Tip Print to Scale Feature in Slide
Developer s Tip Print to Scale Feature in Slide The latest update to Slide 5.0 brings a number of improvements related to printing functionality, giving the user greater control over printed output. Users
More informationTricking it Out: Tricks to personalize and customize your graphs.
Tricking it Out: Tricks to personalize and customize your graphs. Graphing templates may be used online without downloading them onto your own computer. However, if you would like to use the templates
More informationImporting and Exporting FilesChapter1:
Importing and Exporting FilesChapter1: Chapter 1 You can use Revit Architecture to import and export various file types, including AutoCAD and AutoCAD Architecture DWG files to use as design aids. You
More informationMicrosoft Visio 2010: An Introduction
Microsoft Visio 2010: An Introduction This document provides an introduction to using Microsoft Visio 2010. Microsoft Visio is software designed to translate complex information from text and tables into
More informationAutodesk Inventor Design Exercise 2: F1 Team Challenge Car Developed by Tim Varner Synergis Technologies
Autodesk Inventor Design Exercise 2: F1 Team Challenge Car Developed by Tim Varner Synergis Technologies Tim Varner - 2004 The Inventor User Interface Command Panel Lists the commands that are currently
More informationSheets and Revisions A Super Duper Click Saver Production
Sheets and Revisions A Super Duper Click Saver Production Jarod Schultz, Director of Autodesk Services 1 P a g e J a r o d S c h u l t z, i n i t i a l. a e c 2 P a g e J a r o d S c h u l t z, i n i t
More informationME Week 3 Project 3 - Plastic Part Thicken Method
Plastic Part Commands The following section will give a further overview of the Autodesk Inventor plastic part commands. 1. Project 3 This project will further introduce you to the Autodesk Inventor 2012
More informationPublication Number spse01695
XpresRoute (tubing) Publication Number spse01695 XpresRoute (tubing) Publication Number spse01695 Proprietary and restricted rights notice This software and related documentation are proprietary to Siemens
More informationAutodesk Revit 2013 BIM Management
Autodesk Revit 2013 BIM Management Template and Family Creation SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Chapter 1 Creating Custom
More informationMetaMorph Standard Operation Protocol Basic Application
MetaMorph Standard Operation Protocol Basic Application Contents Basic Navigation and Image Handling... 2 Opening Images... 2 Separating Multichannel Images... 2 Cropping an Image... 3 Changing an 8 bit
More informationFeature-based CAM software for mills, multi-tasking lathes and wire EDM. Getting Started
Feature-based CAM software for mills, multi-tasking lathes and wire EDM www.featurecam.com Getting Started FeatureCAM 2015 R3 Getting Started FeatureCAM Copyright 1995-2015 Delcam Ltd. All rights reserved.
More informationEXCITECH TOOLKIT for REVIT
EXCITECH TOOLKIT for REVIT Index 1. WHAT'S NEW?... 3 New in Kobi Toolkit for Revit 2018.1... 3 2. GET STARTED... 3 About Kobi Toolkit... 3 Installation... 3 User interface... 5 Activating licence... 6
More informationTechnique or Feature Where Introduced
Part 6: Keypad 4 Mirrored features Patterned features First extrusion Rounded corners In the earpiece part, you defined a radial pattern, one that created new instances of a feature at intervals around
More informationEffective Collaboration using Autodesk Revit Structure and Autodesk Building Systems
AUTODESK REVIT STRUCTURE AUTODESK BUILDING SYSTEMS Effective Collaboration using Autodesk Revit Structure and Autodesk Building Systems This white paper explains how structural engineers using Autodesk
More informationRevit Architecture 2015 Basics
Revit Architecture 2015 Basics From the Ground Up Elise Moss Authorized Author SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit
More informationDrawing. Chapter 11. Bridge. A. Insert Views. Step 1. Click File Menu > New, click Drawing and OK. on the View Layout toolbar.
Chapter 11 Bridge Drawing A. Insert Views. Step 1. Click File Menu > New, click Drawing and OK. Step 2. Click Model View on the View Layout toolbar. Step 3. Click Browse in the Property Manager. Step 4.
More informationPiping & Instrumentation Diagrams
Page 1 Piping & Instrumentation Diagrams Preface Using This Guide What's New? Getting Started Entering the Workbench Setting up Working Units and Grid Placing Components Routing a Piping Line or I & C
More informationGET TO KNOW FLEXPRO IN ONLY 15 MINUTES
GET TO KNOW FLEXPRO IN ONLY 15 MINUTES Data Analysis and Presentation Software GET TO KNOW FLEXPRO IN ONLY 15 MINUTES This tutorial provides you with a brief overview of the structure of FlexPro and the
More informationGeography 281 Map Making with GIS Project Two: Map Design Issues in ArcMap
Geography 281 Map Making with GIS Project Two: Map Design Issues in ArcMap This activity provides an introduction to the map design process. It takes you through a typical sequence from the initial decision
More informationCreate Geomark in Google Earth Tutorial
Create Geomark in Google Earth Tutorial General business example a potential applicant / user wants to create an area of interest that can be shared electronically to another party eg: another agency,
More informationKitchen and Bath Design Tutorial
Kitchen and Bath Design Tutorial This tutorial continues where the Interior Design Tutorial left off. You should save this tutorial using a new name to archive your previous work. The tools and techniques
More informationThe American University in Cairo. Academic Computing Services. Word prepared by. Soumaia Ahmed Al Ayyat
The American University in Cairo Academic Computing Services Word 2000 prepared by Soumaia Ahmed Al Ayyat Spring 2001 Table of Contents: Opening the Word Program Creating, Opening, and Saving Documents
More informationVirginia Western Community College ARC 221 Architectural CAD Applications Software I
Virginia Western Community College ARC 221 Architectural CAD Applications Software I Prerequisites CAD 241 Course Description Teaches the principles and techniques of architectural drawing practices through
More informationImporting and Exporting FilesChapter1:
Importing and Exporting FilesChapter1: Chapter 1 You can use Revit Architecture to import and export various file types, including AutoCAD and AutoCAD Architecture DWG files to use as design aids. You
More informationLinking a Table to Excel Data
AutoCAD and Its Applications BASICS Supplemental Material Chapter 21 Linking a Table to Excel Data You can use existing data entered in a Microsoft Excel spreadsheet or a CSV (comma-separated) file to
More informationIntroduction to SolidWorks for Technology. No1: Childs Toy
Introduction to SolidWorks for Technology No1: Childs Toy Table of Contents Table of Contents... 1 Introduction... 2 Part Modelling: Cab... 3 Part Modelling: Base... 6 Part Modelling: Wheel... 12 Assembly:
More informationTUTORIAL SESSION Technical Group Hoda Najafi & Sunita Bhide
TUTORIAL SESSION 2014 Technical Group Hoda Najafi & Sunita Bhide SETUP PROCEDURE Start the Altium Designer Software. (Figure 1) Ensure that the Files and Projects tabs are located somewhere on the screen.
More informationCHAPTER 1 COPYRIGHTED MATERIAL. Finding Your Way in the Inventor Interface
CHAPTER 1 Finding Your Way in the Inventor Interface COPYRIGHTED MATERIAL Understanding Inventor s interface behavior Opening existing files Creating new files Modifying the look and feel of Inventor Managing
More informationCreating a Multi-line Plate
Creating a Multi-line Plate The following steps demonstrate how to create a multi-line plate, which will then be used to create a series of badges. Initial Setup Before beginning the procedure, the following
More informationF-1 Car. Blank. in the Feature Manager and click Sketch from the Content toolbar, Fig. 3. Origin. on the Features toolbar.
Chapter 1 A. New Metric Part. Step 1. Click File Menu > New. F-1 Car Blank Step 2. Click Part Metric from the list of templates and click OK, Fig. 1. If you are not using SOLIDWORKS templates (you should
More informationWeek 5 Creating a Calendar. About Tables. Making a Calendar From a Table Template. Week 5 Word 2010
Week 5 Creating a Calendar About Tables Tables are a good way to organize information. They can consist of only a few cells, or many cells that cover several pages. You can arrange boxes or cells vertically
More informationSystems Space Reservation
Systems Space Reservation Preface Using This Guide What's New? Getting Started Enter the Workbench Create an Equipment Reservation Set Correct Working Units and Grid Changing the Current Axis Saving Documents
More informationMicroStation V8i Tips and Tricks and more
The following Tips and Tricks include features that are new in the version SELECTSeries 2&3 and some that have been around for a while enjoy Explorer the File Open dialog. Let s take a close look at the
More informationLesson 17 Shell, Reorder, and Insert Mode
Lesson 17 Shell, Reorder, and Insert Mode Figure 17.1 Oil Sink OBJECTIVES Master the use of the Shell Tool Reorder features Insert a feature at a specific point in the design order Create a Hole Pattern
More informationThis book is about using Microsoft Excel to
Introducing Data Analysis with Excel This book is about using Microsoft Excel to analyze your data. Microsoft Excel is an electronic worksheet you can use to perform mathematical, financial, and statistical
More informationLesson 4 Customize the ToolBox
Lesson 4 Customize the ToolBox In this lesson you will learn how to: Change the toolbox to be a Floating toolbox or a toolbox anchored on the Sidebar. Change the combo ToolBox size and highlighting. Change
More informationCreating Buttons and Pop-up Menus
Using Fireworks CHAPTER 12 Creating Buttons and Pop-up Menus 12 In Macromedia Fireworks 8 you can create a variety of JavaScript buttons and CSS or JavaScript pop-up menus, even if you know nothing about
More informationFast Content for AutoCAD MEP 2015
David Butts Gannett Fleming MP6393 AutoCAD MEP 2015 software, a world-class design and drafting application, is the Zen master of mechanical, electrical, and plumbing design software. The software continues
More information