PSI CONNECTOR. 1Certified LR R Specifications. Standards. 4.0mm pitch/disconnectable Crimp style connectors
|
|
- Raymond Roberts
- 6 years ago
- Views:
Transcription
1 PSI ONNETOR.0mm pitch/disconnectable rimp style connectors Wire-to-wire type Secure locking structure Mis-mating prevention mechanism by keying ( to circuits/ kinds of keying) Finger-friendly design Large electric current was realized. type Double type Specifications urrent rating: 1, D (Refer to the following table.) Voltage rating: 00 V, D Temperature range: - to + (including temperature rise in applying electrical current) ontact resistance: Initial value/ mω max. fter environmental tests/ 0 mω max. Insulation resistance: 1,000 MΩ min. Withstanding voltage: 1,00 V/minute pplicable wire: WG # to #1 * Refer to "General Instruction and Notice when using Terminals and onnectors" at the end of this catalog. * ontact JST for details. * ompliant with RoHS. This PSI connector is designed for wire-toboard and wire-to-wire.0 mm pitch connector. Low insertion force type contact is adopted and it provides excellent operability. This connector has the secure locking device that has the mechanism for preventing the inverse insertion. y adopting key shape and multi colors of housing, prevention function of mis-mating is considered. Note: The current rating differs depending on the number of circuits and the wire size used in each connector. The table below lists the current rating as a function of the number of circuits and the wire size. urrent unit: Wire size (WG) ircuits # 1 # 1 # 0 # # #,,,, Note: Do not branch in parallel current which exceeds the rated current (e.g. more than 1 in the case of circuits with WG #1). If branched in parallel, current imbalance or other problems may develop. If it is absolutely necessary to branch such a large current in parallel, design the circuits without causing any imbalance and provide an extra margin for each circuit. Standards 0 Recognized E 0 1ertified LR 01 R
2 PSI ONNETOR P board layout and ssembly layout type Double type Wire-to-wire type Keying:, types Keying: type Note: 1. The above figure is the figure viewed from the connector mounting side.. Tolerances are non-cumulative: ±0.0 mm for all centers.. Hole dimensions differ according to the type of P board and piercing method. The dimensions above should serve as a guideline. ontact JST for details. ircuits 1 17 F 0. t t G 1 H.. pplicable panel thickness (mm) 0..0 Socket contact SPSI-001T-M1.1 SPSI-1T-M1.1 pplicable wire Insulation O.D. (mm) Q'ty/reel opper alloy, tin-plated. SPSI-001T-M1.1 MKS-L P-KN MK/SPSI/M PLMK SPSI/M SPSI-1T-M1.1 MKS-L MK/SPSI/M-1-11 PLMK SPSI/M1-11
3 PSI ONNETOR Socket housing 1. < to circuits> < to 1 circuits> ircuits Keying 1 1 PSIP-0V-LE- PSIP-0V-Y- PSIP-0V-R- PSIP-0V-LE- PSIP-0V-Y- PSIP-0V-R- PSIP-0V-LE- PSIP-0V-Y- PSIP-0V-R- PSIP-0V-LE PSIP-0V-LE PSIP-0V-LE PSIP-V-LE PSIP-1V-LE PSIP-1V-LE Material box Glass-filled PT, ULV-0 <For reference> s the color identification, ex. PSIP-0V-LE- LE...light blue Y...yellow R...red < to circuits> < to 1 circuits> ircuits Keying PSILE-1 0-PSIY-1 0-PSIR-1 0-PSILE-1 0-PSIY-1 0-PSIR-1 0-PSILE-1 0-PSIY-1 0-PSIR-1 0-PSILE-1 0-PSILE-1 0-PSILE-1 -PSILE-1 1-PSILE-1 1-PSILE box Post: opper alloy, copper-undercoated, tin-plated (reflow treatmnent) : Glass-filled PT, ULV-0 This product displays (LF)(SN) on a label. Note: Other kinds of post-omitted products are available. ontact JST for details. <For reference> s the color identification, ex. 0-PSILE-1 LE...light blue Y...yellow R...red
4 PSI ONNETOR < to circuits> ircuits Keying S0-PSILE-1 S0-PSIY-1 S0-PSIR- S0-PSILE-1 S0-PSIY-1 S0-PSIR- S0-PSILE-1 S0-PSIY-1 S0-PSIR box Post: opper alloy, copper-undercoated, tin-plated (reflow treatmnent) : Glass-filled PT, ULV-0 This product displays (LF)(SN) on a label. Note: Other kinds of post-omitted products are available. ontact JST for details. <For reference> s the color identification, ex. S0-PSILE-1 LE...light blue Y...yellow R...red Pin contact SPSM-001T-M1.1 SPSM-1T-M1.1 pplicable wire Insulation O.D. (mm) Q'ty/reel.. 1 opper alloy, tin-plated. SPSM-001T-M1.1 P-KN SPSM-1T-M1.1 rimp applicator MKS-L MK/SPSI/M PLMK SPSI/M MKS-L MK/SPSI/M-1-11 PLMK SPSI/M1-11 Receptacle housing ircuits Keying PSIR-0V-LE- PSIR-0V-Y- PSIR-0V-LE- PSIR-0V-Y bag.1 Material Glass-filled PT, ULV <For reference> s the color identification, ex. PSIR-0V-LE- LE...light blue Y...yellow.
5 PSI ONNETOR ontact position location numbers Socket housing Top entry Side entry Receptacle housing Double Double < to circuits> < to 1 circuits> < to circuits> < to 1 circuits> < to circuits> < to circuits> Pin-omitted 1) When setting two times of pitch in single type header with omitting every other one pin However, pins shall be inserted in No.1-circuit and No. N-circuit. *1 (.0)-PSI *1; No. of circuits (No. of pins) ; With circuit (pin) ; Without circuit (pin) ircuit No. ircuit (pin) 1 ircuit No. ircuit (pin) 1 (.0)-PSILE-1 (.0)-PSILE-1 ) When setting two times of pitch in double type header with omitting every other one pin However, pins shall be inserted in the both ends of circuit. *1 (*-*)-PSI *1; No. of circuits (No. of pins) *; ircuit No. of used original header *; ircuit number without pin (ircuit number in which pin was removed) ircuit No. ircuit (pin) ircuit No. ircuit (pin) 1 (-, )-PSILE-1 ) When setting three times of pitch in double type header with omitting every other two pins However, pins shall be inserted in the both ends of circuit. *1 (*-*)-PSI ircuit No. ircuit (pin) ircuit No. 7 1 ircuit (pin) (1-,,,,,, 1, 1)-PSILE-1 ) When omitting a pin of No. circuit in single type herder However, pins shall be inserted in the both ends of circuit. *1 (*-*)-PSI ircuit No. ircuit (post) 1 (-)-PSILE-1 Note) s for pin-omitted product, there is a setting that cannot be used. ontact JST for details.
6 PSI ONNETOR Keying Socket housing < circuits> type type type < circuits> < circuits> < circuits> < circuits> < circuits> < circuits> < circuits> < circuits> Model No. PSIP-0V-LE- PSIP-0V-Y- lue PSIP-0V-LE- Yellow PSIP-0V-Y- Red PSIP-0V-LE- PSIP-0V-Y- < circuits> type type type < circuits> < circuits> < circuits> < circuits> PSIP-0V-R- PSIP-0V-R- PSIP-0V-R- From circuit to circuit are applied. < circuits> < circuits> < circuits> < circuits> Model No. 0-PSILE-1 0-PSIY-1 lue 0-PSILE-1 Yellow 0-PSIY-1 Red 0-PSILE-1 0-PSIY-1 type type type 0-PSIR-1 0-PSIR-1 0-PSIR-1 From to circuits are applied. < circuits> < circuits> < circuits> < circuits> < circuits> < circuits> < circuits> < circuits> < circuits> < circuits> < circuits> < circuits> < circuits> < circuits> < circuits> < circuits> < circuits> < circuits> Model No. S0-PSILE-1 S0-PSIY-1 lue S0-PSILE-1 Yellow S0-PSIY-1 Red S0-PSILE-1 S0-PSIY-1 Receptacle housing type Note) oss type < circuits> < circuits> < circuits> < circuits> S0-PSIR- S0-PSIR- S0-PSIR- From to circuit are applied. Note) oss: Only type boss position is reversed. Model No. lue PSIR-0V-LE- PSIR-0V-LE- Yellow PSIR-0V-Y- PSIR-0V-Y- From to circuits are applied.
1Certified LR R Inner-housing lock. Outer-housing lock
.mm pitch/disconnectable Crimp style connectors (Combined use for both wire-to-board and wire-to-wire connections) a 0 This VL connector is designed for wire-towire and wire-to-board. mm pitch connector
More information6.2mm pitch/disconnectable Crimp style connectors. 1Certified LR R <Inner-housing lock>
6.mm pitch/disconnectable Crimp style connectors a 0 This VL connector is designed for wire-towire and wire-to-board 6.mm pitch connector corresponding to large current. Secondary retainer, which prevents
More informationRX CONNECTOR. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.54mm
RX CONNECOR mm Disconnectable Insulation displacement connectors for.27mm pitch ribbon cables pitch Features Conforms to MIL Standards s RX connectors conform to MIL standards (MIL-C-833) and are compatible
More informationCZ FAMILY SERIES/CZ CZW CZH CZHW TZ TZW
CZ FAMILY SERIES/CZCZWCZHCZHWTZTZW 1.5mm pitch/disconnectable Insulation displacement connectors RPZ connector: Receptacle RPZ connector: Plug CZW connector: Header CZ connector: header CZ connector: TZ
More informationPA FAMILY SERIES/PA PAF PAL CONNECTOR
PA FAMILY SERIES/PA PAF PAL CONNECTOR.0mm pitch/wire-to-board (Crimp style/idc) / Wire-to-wire (Crimp style/idc) Based upon wire-to-board crimp style PA connectors, the PA series family of connector have
More information2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR J
Emboss Tape.mm pitch/disconnectable Crimp style connectors Radial Tape JST 1 Specifications Current rating: 3 A AC, DC (AWG #) Voltage rating: 0 V AC, DC Temperature range: - C to +8 C (including temperature
More informationPA FAMILY SERIES/PA PAF PAL CONNECTOR
PA FAMILY SERIES/PA PAF PAL CONNECTOR 2.0mm pitch/wire-to-board (Crimp style/idc) / Wire-to-wire (Crimp style/idc) PAF Receptacle (IDC style) PA Shorouded header (Top entry type) PAF Receptacle (IDC style)
More informationZH CONNECTOR. 1 Certified LR R Disconnectable Crimp style connectors. Features. Specifications. Standards. 1.5mm
Crimp mm (.059") pitch ZH CONNECTOR Disconnectable Crimp style connectors Emboss Tape Features Compact, low profile design The ZH connector requires only about 45% of the installation space required by
More informationCZ FAMILY SERIES/CZ CZW CZH CZHW TZ TZW
RPZ connector: Receptacle RPZ connector: Plug CZW connector: Header CZ FAMILY SERIES/CZCZWCZHCZHWTZTZW 1.5mm pitch/disconnectable Insulation displacement connectors CZ connector: Side entry header CZ connector:
More informationF SERIES 2.5mm PITH DRWER ONNETOR ORDER ODE F 01 F 11 F Positioning post Omit : With post 1 : Without post No. of contacts 004 : 4 pin 006 : 6 pin 00
2.5mm Pitch Drawer onnector rimping Termination for able ssembly F SERIES K-1 F SERIES 2.5mm PITH DRWER ONNETOR ORDER ODE F 01 F 11 F Positioning post Omit : With post 1 : Without post No. of contacts
More informationDistributed by: www.jameco.com 11 The content and copyrights of the attached material are the property of its owner. Crimp.mm (.1") pitch VH CONNECTOR Disconnectable Crimp style connectors Features Proven
More informationRFC CONNECTOR 2J Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
Disconnectable Crimp style Wire-to-wire connectors Signal/hybrid type drawer connector for unit connection. The RFC connector absorbs misalignment between the two units and also excels in durability. The
More informationRFC CONNECTOR 2J Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
Disconnectable Crimp style Wire-to-wire connectors Signal/hybrid type drawer connector for unit connection. The RFC connector absorbs misalignment between the two units and also excels in durability. The
More informationProduct Compliant to DIN41612/IEC603-2 Standard
Product ompliant to IN41612/IE603-2 Standard PN Series Pin Header Side Straight through hole type Receptacle Side Straight through hole PN10E- * *P-2.54S PN10E-* *S-2.54S PN10-* *S-2.54S PN10E-* *S-2.54S
More informationFLZ CONNECTOR. 1Certified LR Connectors for FFC and FPC. Features. Specifications. Standards. 0.5mm
0.5mm (.020") pitch FLZ CONNECTOR Connectors for FFC and FPC Emboss Tape Features Zero insertion force mechanism ZIF mechanism increases wear resistance and extends the connector's mating life. Heat resistant
More informationKR FAMILY SERIES KRW KR PHN TR CONNECTOR
KR FAMILY SERIESKRWKRPHNTR CONNECTOR 2.0mm pitch/disconnectable Insulation displacement and Crimp style connectors PH connector: header (for PHN and KR receptacles) TR connector: Unit for wire-to-wire
More information2.5mm Pitch Drawer Connector Crimping Termination for Cable Assembly FA SERIES A-1
2.5mm Pitch Drawer onnector rimping Termination for able ssembly F SERIES -1 ORDER ODE F 01 F 11 F Positioning post Omit : With post 1 : Without post No. of contacts 008 : 8 pin 020 : 20 pin 0 : pin 022
More informationCPTCONNECTOR. Board-to-wire. Features. Specifications
CPTCONNECTOR Board-to-wire Features Compact design.0mm pitch is realized miniaturization and low profile as the connector for automobile. Terminal construction Female terminal is designed for simple box
More informationSM CONNECTOR. 1Certified LR R Disconnectable Crimp style wire-to-wire connectors. Features. Specifications. Standards. 2.
Crimp.mm (.") pitch SM CONNECTOR Disconnectable Crimp style wire-to-wire connectors Features High contact pressure With each insertion and withdrawal, the mating contacts wipe against each other to remove
More informationKR FAMILY SERIES/KRW KR PHN TR CONNECTOR
IDC mm (.") pitch KR FMILY SERIES/KRW KR PHN TR CONNECTOR Disconnectable Insulation displacement and Crimp style connectors Features MultiIDCharnesses are possible Various types of connectors In addition
More informationHCMCONNECTOR. Board-to-wire/Wire-to-wire. Features. Specifications. Miniaturized Connectors, Compliant with the Automotive Performance Specifications
HCMCONNECTOR Board-to-wire/Wire-to-wire Features Miniaturized Connectors, Compliant with the Automotive Performance Specifications Boxed Female Terminal with Triple Over-stress Protection Mechanism Accept.
More informationZH CONNECTOR. Disconnectable Crimp style connectors. Features. Specifications. Standards. 1.5mm
Crimp mm (.0") pitch ZH CONNECTOR Disconnectable Crimp style connectors Emboss Tape Features Ultracompact, low profile design The ZH connector requires only about % of the installation space required by
More informationDynamic Series Connectors
D-5000 Series Series profile The Dynamic 5000 series was developed for up to 5 amperes in response to the demand for improved reliability and productivity for the main power lines in equipment. They can
More informationKH SERIES. Features. JK series area by 20% compared with our JK series subminiature connectors. 6.18
D SUBMINIATURE CONNECTOR Right angle through-hole socket K SERIES RIGT ANGE TROUG-OE SOCKET 01 (with hexagonal lock screw blocks) (without lock screw blocks, but with grounding adapters having a inch thread)
More informationArcher Connectors. Archer Kontrol. 1.27mm (.050") PITCH
rcher onnectors mm (.050") PITH The rcher range from Harwin is a series of mm (0.05 ) pitch connectors, offering single and double row options at half the P footprint of a 2.54mm (0.1 ) pitch connector.
More informationJFA CONNECTOR J2000 SERIES
JF CONNECTOR J000 SERIES.mm pitch/disconnectable Crimp style connectors(wire-to-board/wire-to-wire) Specifications Current rating:. max. C, DC ( circuits/wg #0) Voltage rating: 0 VC, DC Temperature range:
More informationRight angle through-hole plug and socket. Features circuits 25-circuits 9-circuits 25-circuits
D SUBMINIATURE CONNECTOR J SERIES Right angle through-hole plug and socket RIGT ANGE TROUG-OE PUG AND SOCKET 01 Right angle through-hole plug (with hexagonal lock ) Right angle through-hole socket (without
More informationJFA CONNECTOR J2000 SERIES
JF J000 JF ONNETOR J000 SERIES.5mm pitch/disconnectable rimp style connectors(wire-to-board/wire-to-wire) Specifications urrent rating:.6 max., D ( circuits/wg #0) Voltage rating: 50V, D Temperature range:
More informationJK SERIES. SUBMINIATURE CONNECTOR Crimp style plug and socket. Features. Standards. Specifications CRIMP STYLE PLUG AND SOCKET
D SUBMINIATURE CONNECTOR Crimp style plug and socket CRIMP STYLE PLUG AND SOCKET JK SERIES 01 Crimp style plug Crimp style socket Pin contact Socket contact Features The dimples in the shell provide the
More informationCF CARD CONNECTOR MA Type
Emboss Tape CF CARD CONNECTOR MA Type 1.27mm pitch/50-circuit CF card connector Socket / Dual-row straddle type, SMT type Card frame / for type I cards Adapter / for type I, II cards Header / for type
More informationEL CONNECTOR. Disconnectable Crimp style Wire-to-wire connectors. Features. Specifications. Standards. 4.5mm
Crimp.mm (.") pitch EL CONNECTOR Disconnectable Crimp style Wire-to-wire connectors The contacts for the compact EL connector can be easily inserted into the connector housings. The plug housing and the
More informationDUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability
BOARD/WIRE-TO-BOARD CONNECTORS DUBOX SHUNTS FEATURES & BENEFITS Dual-beam contacts for added reliability Slotted cutout in low profile housing simplifies electrical testing Side-by-side and end-to-end
More informationEL CONNECTOR. Disconnectable Crimp style wire-to-wire connectors. Features. Specifications. 4.5mm
Crimp.mm (.") pitch EL CONNECTOR Disconnectable Crimp style wire-to-wire connectors The contacts for the compact EL connector can be easily inserted into the connector housings. The plug housing and the
More informationJFA CONNECTOR J2000 SERIES
JF CONNECTOR J000 SERIES.mm pitch/disconnectable Crimp style connectors(wire-to-board/wire-to-wire) Specifications Current rating:. max. C, DC ( circuits/wg #0) Voltage rating: 0V C, DC Temperature range:
More informationPC CARD CONNECTOR C TYPE
PC Card 1.27mm (.050") pitch PC CARD CONNECTOR C TYPE 68-circuit PC card connector, conforming to PCMCIA/JEIDA Ver.4.1 Features Conformity to PCMCIA (USA) and JEIDA Ver.4.1 (Japan) The ICM-C connector
More informationPNI Connectors. 2.0mm pitch wire to board/wire to wire solutions. Purpose:
PNI Connectors 2.0mm pitch wire to board/wire to wire solutions Purpose: To introduce the PNI wire-to-board and wire-to-wire, crimp style connector from JST. Objectives: Illustrate the intended application.
More informationJ DSUBMINIATURE CONNECTOR SERIES
J DSUBMINIATURE CONNECTOR SERIES Solder pot plug and socket SOLDER POT PLUG AND SOCKET 01 Solder pot plug Solder pot socket Features The socket contacts are formed by high-speed stamping presses Costs
More informationQUICKIE SHROUDED HEADERS LOW PROFILE
BOARD/WIRE-TO-BOARD CONNECTORS QUICKIE SHROUDED HEADERS LOW PROFILE FEATURES & BENEFITS Recessed pins assure proper alignment and eliminate damage during mating End windows for latching with IDC receptacle
More informationJ DSUBMINIATURE CONNECTOR SERIES
J DSUBMINIATURE CONNECTOR SERIES Solder pot plug and socket SOLDER POT PLUG AND SOCKET 01 Solder pot plug Solder pot socket Features The socket contacts are formed by high-speed stamping presses to obtain
More informationBOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS MINITEK UNSHROUDED VERTICAL HEADERS TECHNICAL INFORMATION MATERIALS Housing: High temperature, black thermoplastic Flammability rating:
More informationArcher Connectors. Archer Kontrol. 1.27mm (.050") PITCH
rcher onnectors mm (.050") PITH The rcher range from Harwin is a series of mm (0.05 ) pitch connectors, offering single and double row options at half the P footprint of a 2.54mm (0.1 ) pitch connector.
More informationCF CARD CONNECTOR MA TYPE
CF Card 1.27mm (.5") pitch CF CARD CONNECTOR MA TYPE 5-circuit CF card connector Emboss Tape Features Socket Both dual-row straddle type and single-row SMT type sockets are available. Single-row SMT type
More informationAIT- CONNECTOR. Board-to-wire/Wire-to-wire. Features. Specifications
AIT- CONNECTOR 0.4 unsealed low-profile connector series for use in a wide range of automotive applications. Board-to-wire/Wire-to-wire Features Ultra Low Profile Connector Over 30% Height uction as compared
More information1mm Pitch Double Rows Low Profile Wire-to-Board Connectors
mm Pitch Double Rows Low Profile Wire-to-Board Connectors DF series Features. Contact Pitch mm contact pitch allows reliable solder and cable termination.. Reliable electrical connection wipe Effective
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationAMP Soft Shell Pin and Socket Connectors
Soft Shell Pin and Socket Connectors Restriction on the use of Hazardous Substances (RoHS) t Tyco Electronics, we re ready to support your RoHS requirements. We ve assessed more than 1.5 million end items/components
More informationMini-Universal MATE-N-LOK 2 Connectors
MP Mini-Universal MTE-N-LOK 2 Product Facts One molded piece, secondary locking plug and cap housing assemblies Three-point stabilization to provide better terminal position Fully polarized to provide
More informationSSL 1.1 Series. Product Data Sheet REV. 4, 2014 JUN
SSL 1.1 Series Product Data Sheet REV. 4, 2014 JUN General Specification Number of Positions Current Rating 2, 4, 6P 3A (Max) Voltage Rating Dielectric Withstand Voltage Durability Color Operating Temperature
More information343
.050" IDC CONNECTORS DUL ROW SOCKETs & Transition Plugs HFCS & HFDP SERIES Introduction: dam Tech.050" IDC Sockets and Transition Plugs are low profile, precision designed flat cable connectors that feature
More informationFor board-to-board. Narrow pitch connectors (0.5mm pitch)
Discontinued Discontinued as as of of September September 30, 30, 013 013 For board-to-board Narrow pitch connectors (0.5mm pitch) P5KL Series 5.8mm 3.3mm Products are discontinued. FEATURES 1. Low profile
More informationAirMax POWER CONNECTOR MODULES Part of the AirMax Connector Family
Part of the AirMax Connector Family HIGH PERFORMING AND DURABLE CONNECTORS Hard Metric high power connectors are a perfect complement to AFCI s ExaMAX, AirMax, ZipLine and Millipacs signal connectors.
More information2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be chosen according to applications,
More informationPC/104, PC/104 Plus Specification
PC/104, PC/104 Plus Specification Industry Standard bus connection systems, typically used on embedded PC applications. Designed for oard-to-oard stacking with a common bus. PC/104 Connectors mm pitch
More information2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series Product Specifications Rating type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be
More informationCommercial MATE-N-LOK Connectors
MP Commercial MTE-N-LOK Connectors Product Facts Fully polarized nylon housings Easy cavity identification Locking devices are integral part of design. Connector halves will hold together under severe
More informationKM025B Series. Features. Application. 025 ( 0.64 mm ) / Standard. Rev. 002 (' ) 1. 표준소형커넥터제품 2. 강화된체결음, 커넥터삽입력을만족한감성품질이우수한커넥터
Features 1. 표준소형커넥터제품 2. 강화된체결음, 커넥터삽입력을만족한감성품질이우수한커넥터 3. 자동차의소형, 경량화요구에대응한제품 4. 세경전선에대응가능한 W/H 작업성구현 5. 신소재를적용하여외부온도및충격에의한제품파손을개선 Application 1. Switch Unit, Heater Control Unit, Cluster, AVN etc 차량용
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More information1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationDistributed by: www.jameco.com -800-8-44 The content and copyrights of the attached material are the property of its owner. Pin and Socket Mini-Universal MTE-N-LOK Product Facts Compact, durable housings
More information1.27mm Pitch Two-Piece Connectors
1.7mm Pitch Two-Piece Connectors HIF6 Series Connector in combination with the HIF6 series connection type HIF3B Series (MIL-C-833) HIF Series (Board direct mount type) Features 1. Product Variation The
More informationSeries 79 Micro-Crimp Section F: Straight Printed Circuit Board Connectors
P Series 79 Micro-rimp Section : Straight Printed ircuit oard Receptacles With Pin ontacts, Straight P Termination, 790-043P 790-043P connectors feature thru-hole termination to rigid or flexible circuits.
More informationTX1/TX2/TX3 SERIES CONNECTORS
TX 1 to 3 Series connectors are two-piece PC connectors with 1.27mm (.050") contact spacing. They are designed for board-to-cable applications. Configurations include IDC sockets (TX1 and TX2) for flat
More informationD-SUBMINIATURE PIN-IN-PASTE CONNECTORS
INPUT/OUTPUT CONNECTORS D-SUBMINIATURE PIN-IN-PASTE CONNECTORS OVERVIEW The D-Subminiature connectors are one of the most popular I/O solutions, addressing segments such as Telecommunications, Industrial,
More information2.54mm Pitch Board to Board Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationNARROW PITCH (0.4mm) CONNECTORS P4 SERIES
Without soldering terminal With soldering terminal NARROW-PITH ONNTORS FOR BOARD-TO-BOARD AND BOARD-TO-FP ONNTION FATURS 1. 0.4 mm pitch and support for mated heights of up to 1.5 mm, 2.0 mm, 2.5 mm, 3.0
More informationCARD-EDGE CONNECTORS (AXC)
XC FOR PC OR TO PC OR CR-EGE CONNECTORS (XC) Solder-dip type with flange Solder-dip type without flange FETURES 1. Long insertion and removal life. Thanks to our original contact shape, low insertion force
More information.093 Commercial Pin and Socket Connectors
Product Facts Polarised Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold plating Panel-mounting
More informationAPPLICATION NOTES. Connectors for LED Lighting Applications. Co-Planar Board Mating FIG. 1
APPLICATION NOTES Connectors for LED Lighting Applications Mill-Max addresses the connector needs of the growing field of LED lighting applications with products such as receptacles and sockets suitable
More informationMTA-156 IDC Quad Connectors
MT-156 IDC Quad Connectors MT-156 Product Facts Provides four points of contact Greater current carrying capability than Standard MT-156 Connectors Connector styles include both closed end and feedthru
More informationBOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) MICTOR RECEPT ASSY, 38 POS.
More informationUSB & IEEE 1394 FIREWIRE
USB & IEEE 1394 FIREWIRE UNIVERSAL SERIAL BUS & IEEE 1394 FIREWIRE INTRODUCTION: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable,
More informationThe 2.5 mm wide ultra-slim body contributes to further miniaturization and functionality enhancement of target equipment.
Compliance with RoHS Directive The 2.5 mm wide ultra-slim body contributes to further miniaturization and functionality enhancement of target equipment. FEATURES 1. 2.5 mm wide ultra-slim two-piece connectors
More informationRECTANGULAR POWER CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved TE CONNECTIVITY (TE) 08P MTA156 CONN ASSY 3-643818-8 TE Internal Number: 3-643818-8 Product Type
More informationNARROW-PITCH (0.8mm) CONNECTORS P8 SERIES
Socket Header Compliance with RoHS Directive FETURES 1. The product lineup consists of the low profile of 3.0 mm, 3.5 mm, 4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm, 6.0 mm, 7.0 mm, 8.0 mm, 11.5 mm, and 13.0 mm 14.0
More information7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
NEW 7.9 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits
More informationBOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) MICT,REC,038,ASY,.025,TAPE,CAP
More information(MR) Miniature Rectangular Connectors (Continued)
Product Facts Housings positively lock to help prevent accidental disengagement Either cap or plug housing can be mounted in same rectangular panel cutout without additional hardware UL94V-0 housings Plug
More information2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin)
NEW 2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin) DF59 Series Floating Structure in Three xial Directions (Board-to-Board Structure) X
More informationBOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) FB-5R,ASY,30,SIG,REC,SL,2.73
More informationPC BOARD CONNECTORS 740 SERIES
P ORD ONNETORS 740 SERIES FETURES Various types of headers are available: one side shrouded, both sides shrouded, with simplified latch, and box type. The connector having a simplified latch prevents the
More informationDDR4 DIMM Sockets, Halogen-free
Meeting JEDEC specifications, these high-speed sockets offer greater PCB real-estate and cost savings with excellent assembly processing compatibility Meeting JEDEC specifications, Molex s Vertical SMT
More informationNarrow pitch connectors (0.4mm pitch)
For board-to-board For board-to-fp Narrow pitch connectors (0.4mm pitch) P4 Series Without soldering terminals 5.1mm 3.96mm With soldering terminals FATURS 1. 0.4 mm pitch and support for mated heights
More informationCABLE CONNECTOR 6100/6200/6200S/6230 SERIES. 2.54mm Pitch Flat Ribbon Cable Connector K-7
CABLE CONNECTOR 2.54mm Pitch Flat Ribbon Cable Connector 6/6/6S/62 SERIES K-7 6/6/6S/62 SERIES 2.5mm PITCH FC CONNECTOR 2.54mm Pitch FC Connector Product Line-up SERIES / FIGURE TYPE CONNECTOR STYLE TERMINATION
More informationSYSTEM CJ TELEPHONE JACKS & MODULAR PLUGS
SYSTEM TELEPHONE JKS & MODULR PLUGS vilux Introduction System contains splice termination regular modular plugs, category 5 modular plugs and board mount and surface mount telephone jacks. The modular
More informationCMC Hybrid Connectors Standard and Power Versions
The Molex family of provides a sealed, high-density, modular and cost-effective connection system for heavy-duty, powertrain and body-electronics applications in the transportation industry The CMC connector
More informationFOR PC BOARD TO FLAT CABLE
AXM FOR PC BOARD TO FLAT CABLE MIL CONNECTORS (AXM) Density mounting Long lever type Short lever type Compliance with RoHS Directive FEATURES 1. High density mounting is possible. Even with mounting right
More information1.27mm Pitch Two-Piece Connector
1.7mm Pitch Two-Piece Connector HIF6 Series Connector in combination with the HIF6 series connection type HIF3B Series (MIL-C-83503) HIF Series (Board direct mount type) HIF5 Series 1 (Card edge type)
More informationTable of Contents Interface Module Systems
UHNN Terminal locks Note: ll part numbers are RoHS ompliant. Table of ontents Interface Module Systems Overview (atalog Numbering ode) 196 Interface Modules 197-204 DIN 41612 onnector 198 Telco onnector
More informationXSLS SERIES. Ultra Fine Pitch (0.25mm), Ultra Low Profile (1.44mm) Connector for Micro Coaxial Cable (Stacking Type) KEL CORPORATION
Ultra Fine Pitch (0.25mm), Ultra Low Profile (1.44mm) Connector for Micro Coaxial Cable (Stacking Type) XSLS SERIES KEL CORPORATION KEL CONNECTORS,INC KEL Taiwan Co., Ltd. KEL Shanghai Co.,Ltd. www.kel.jp
More information1.27mm Pitch Two-Piece Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationITS-Z0344 Half Pitch Interface Connectors
All non- product have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
More information3M Boardmount Socket 2 mm x 2 mm Straight Surface Mount, Straight and Right Angle Plated Through-Hole 1502 Series
M Boardmount Socket High Temperature Insulator Reflow Solder ompatible Low height helps minimize PB stack height End Stackable Thru-hole versions are side stackable SMT parts are available in tape and
More informationRIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) IDC LOW PRO HDR 30P VERT LG LA AMP-LATCH
More informationCROWN CLIP Series Sockets
OWN LIP Series Sockets Product Facts ompact design High performance OWN BND contacts urrents to 350 mps 1 Mates with solid or laminated blades Supports true hot-plug (current interruption)2 Float-mount
More information0.8mm Pitch Stacking Height 5 to 9mm Connector
0.8mm Pitch Stacking Height 5 to 9mm Connector FX6 Series Stacking Height: 5 to 9mm 5~9mm Features 1. Stacking Height 5 to 9mm The board to board stacking height can be set at every millimeter between
More information2.5mm & 3.5mm AUDIO JACKS STEREO & MONO EARPHONE JACKS ASJ SERIES
.mm &.mm AUDIO JACKS INTRODUCTION: Adam Tech ASJ Series Stereo Jacks are a broad range of.mm and.mm jacks used primarily in computer and multi-media audio applications. This series provides a multitude
More informationIDC for 50mil(1.27mm) Falt Cable with One-touch Locking Ejector System 50mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41
IDC for mil(1.27mm) Falt Cable with One-touch Locking Ejector System mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41 8822E/8830E/8831E SERIES 1.27mm PITCH 2 PIECE CONNECTOR / IDC FOR 1.27mm (mil)
More informationCOMMUNICATIONS, DATA, CONSUMER DIVISION DIN Selector Guide. PCB Connectors
COMMUNICATIONS, DATA, CONSUMER DIVISION DIN 41612 Selector Guide PCB Connectors FCI: SETTING THE STANDARD FOR CONNECTORS With operations in 30 countries, FCI is a leading manufacturer of connectors. Our
More information