Electric Motors. IE2 Motors Industrial. hoyermotors.com. IE2 Motors. GREEN responsibility
|
|
- Lillian George
- 6 years ago
- Views:
Transcription
1 Electric Motors IE Motors hoyermotors.com IE Motors GREEN responsibility
2 Behind Hoyer Motors Svend Hoyer A/S is an international company comprising the two business units Hoyer Motors and Hoyer Transmissions. Headquartered in Denmark and China, we are represented through subsidiaries and sales offices in a number of countries across the globe. We pride ourselves of being an elite manufacturing enterprise with the highest attention to service and support a company where dedication, competitiveness and reliability are second to none. At Svend Hoyer A/S, meeting agreements is as natural as breathing air. Our motto: A promise is a promise, is the foundation for always supplying solutions that meet or, indeed, exceed our customers expectations in every respect. Our business policy is always to be direct in our approach, even in the rare case of complaint or criticism. In other words, Svend Hoyer A/S is a company you can rely on. A trustworthy business partner that always meets our obligations on deliveries and technical solutions both in the short and long term. This is what we mean by Exceeding Expectations.
3 Hoyer IE Electric Motors General information about Hoyer IE industrial electric motors Hoyer IE industrial electric motors are manufactured according to international standards under IEC and are fulfilling the requirement of the EC Directive 005/3 (IE-directive). Hoyer motors are installed in many different industrial fields all over the world, and with a proven quality, high reliability and performance, Hoyer is a known brand in the market. Technical information Totally enclosed squirrel cage, TEFC, three phase motors type HMA (aluminum) in size 56 to 13 (size 160 and 1 on request) and type HMC (cast iron) in size 160 to 400 (below size 160 and bigger than size 400 on request). Rotor is casted with 100% pure aluminum and shaft is made of high quality C steel. HMC motors are provided with SKF bearings. HMA motors are supplied with C&U bearings. All sizes have fixed bearing in drive-end as standard. Stator winding is made with double coated copper wire and phase to phase insulation. The insulation system is Class F, maximum 105K temperature rise at 40 C ambient temperature. Sound level within limits of IEC Hoyer IE industrial motors 3kW are manufactured for 30/400V 50Hz and > 3kW for 400/690V 50Hz. Other voltages can be supplied on request. All Hoyer IE industrial motors are with PTC terminal protection. Motors can be modified with bimetal detector, heating elements for stand still protection and PT100 for both winding and bearings on request. Protection is IP55 with shaft sealing as standard. Higher protection class on request. Motor size 100 are supplied with eyebolts for lifting. Hoyer IE industrial motors are painted black RAL 9005 with low gloss for use in normal industrial environments. Application info Hoyer IE industrial electric motors are used within a wide variety of applications. Some of the typical applications are listed below: Fans (air handling units, refrigeration plants, oil coolers) Hydraulic power packs Pumps (for water, fuel, oil) Shredders (granulation, crushing) Gears (gear reducers, gearmotors) Motors below 00kW are designed for Class B temperature rise. Class H insulation system can be delivered on request. All motors are manufactured according to IEC 60034, IEC6007, EN50347 and tested according to IEC Rotor is dynamically balanced with half key to fulfill vibration level IEC grade A. 3
4 IE / pol Motor type Power Speed Current at 400V Efficiency (%) Pf Torque IM Weight kw rpm I N (A) I S /I N 1 / 1 load 3 / 4 load 1 / load cos φ T N T S /T N T M /T N J(kgm ) kg Aluminium motors HMA , ,35 6, ,68 0,31,3,4 0, ,7 HMA 56-0,1 70 0,38 6, ,71 0,43,3,4 0,0001 3,9 HMA , ,53 6, ,75 0,63,,4 0, ,1 HMA 63-0,5 70 0,75 6, ,76 0,88,,4 0, ,6 HMA , ,95 6, ,8 1,3,,4 0, ,0 HMA 71-0, ,33 6, ,8 1,9,,4 0, ,5 HMA 1-0, ,7 7,5 81,4 81, 78,3 0,81,5,5 3, 0,00 9,0 HMA - 1,1 8,3 7,7,9 79,9 76,1 0,8 3,6 3, 3,3 0,0013 HMA 90S- 1, ,1 8,4 83,5 83,0, 0,85 4,9,9 3,1 0, HMA 90L-, 850 4,4 8,5 85,7 85,8 83,9 0,85 7,,9 3, 0,00 17 HMA 100L- 3, ,8 8,7 85,7 85,5 83,4 0,87 9,9 3,1 3,5 0, HMA M1-4, ,5 8,4 87,0 87,1 85,4 0, , 3,4 0, HMA 13S1-5,5 8 10,5 8,4 87,0 86,3 83,6 0,89 18,4 3,5 0,015 HMA 13S- 7, ,5 8,4 88,1 87,6 85,3 0,90 5,4 3,5 0, Cast iron motors HMC 160M ,9 89,4 89,3 87,5 0,89 36,,3 0, HMC 160M ,0 90,3 90,3 89, 0,89 49,,3 0, HMC 160L- 18, ,1 90,9 91,3 90,4 0,89 60,,3 0, HMC 1M , 91,3 91,1 89,7 0,89 71,,3 0, HMC 00L ,5 9,0 9, 90,7 0,89 97,,3 0, HMC 00L ,5 9,5 9,7 90,1 0,89 9,,3 0, HMC 5M ,6 9,9 9,4 90,5 0,89 1,,3 0,46 38 HMC 5M1-* , 93, 93,1 9,3 0,89 177,0,3 0, HMC 50M ,6 93, 9,7 90,8 0,89 177,,3 0, HMC 50M1-* ,0 93,8 93,7 9,8 0,89 41,0,3 0, HMC S ,9 93,8 93,6 9,5 0,89 40,0,3 0,67 57 HMC M ,0 94,1 93,9 9,8 0,89 89,0,3 0, HMC 315S ,1 94,3 94,0 9,8 0,90 35,0, 1, HMC 315M ,1 94,6 94,0 9,8 0,90,0, 1, HMC 315L ,1 94,8 94,1 9,9 0,91 513,0,, HMC 315L ,1 95,0 94,1 9,9 0,91 640,0,,53 0 HMC 355M ,1 95,0 94,9 94,5 0,91 0,0, 4,5 1 HMC 355L ,1 95,0 94,9 94,5 0, ,0, 5, HMC 355L ,1 95,3 95,3 95,0 0,9 35 1,8, 5, HMC 400M ,1 95,5 95,5 95, 0,9 1 1,8, 5, HMC 400M ,1 95,5 95,5 95, 0, ,8, 7, HMC 400L ,0 95,8 95,8 95,5 0, ,8, 7, HMC 400L ,0 95,8 95,8 95,5 0,9 17 1,8, 7, Data at 400V 50Hz At 30V 50Hz the current is 3 x current at 400V and at 690V the current is current at 400V / 3. All other data are identical. *Motors with high power / small frame 4
5 IE / 4 pol Motor type Power Speed Current at 400V Efficiency (%) Pf Torque IM Weight kw rpm I N (A) I S /I N 1 / 1 load 3 / 4 load 1 / load cos φ T N T S /T N T M /T N J(kgm ) kg Aluminium motors HMA , ,35 6, ,58 0,4,3,4 0,0000 3,5 HMA , ,40 6, ,55 0,6,3,4 0,0001 3,7 HMA , ,50 6, ,63 0,85,,4 0,0005 4,0 HMA , ,71 6, ,6 1,3,,4 0,0008 4, HMA , , 6, ,68 1,7,,4 0, ,0 HMA , ,1 6, ,73,6,,4 0, ,4 HMA 1-4 0, ,5 6, ,73 3,8,,4 0,001 9,5 HMA -4 0,75 1,8 5,9,8 81,1 78,8 0,78 5,0,5,6 0, HMA 90S-4 1,1,6 5,5 81,5 81, 79,6 0,73 7,4,5 3, 0, HMA 90L-4 1,5 10 3,4 6,6 84,4 83,7,6 0,71 9,9,7 3,4 0, HMA 100L1-4, ,6 7,3 85, 84,8 8,3 0,78 14,5,5 3,4 0, HMA 100L-4 3, ,1 7,3 86,3 85,9 83,6 0,77 0,6 3,4 0, HMA M-4 4,0 10 7,9 7,1 86,7 86,9 85, 0,84 6,,9 0, HMA 13S-4 5,5 10 7,5 88,4 88,1 86, 0, 36,3 3,3 0, HMA 13M1-4 7, ,3 88,9 89,1 87,9 0,8 49, 3, 0,041 6 Cast iron motors HMC 160M ,5 89,8 89,7 89, 0,85 7,,3 0, HMC 160L ,5 90,6 90,5 87,9 0,86 98,,3 0, HMC 1M-4 18, ,7 91, 91,7 91,0 0,86 10,,3 0, HMC 1L ,8 91,6 91,9 91,3 0,86 143,,3 0, HMC 00L , 9,3 9,8 91,3 0,86 194,,3 0,75 43 HMC 00L1-4* ,3 9,7 9,6 91,5 0,86 40,,3 0, HMC 5S ,3 9,7 9,8 90,9 0,86 38,,3 0, HMC 5M ,4 93,1 93,1 91,3 0,86 90,,3 0,49 38 HMC 5M1-4* , 93,5 93,4 9,7 0,87 355,,3 0, HMC 50M ,4 93,5 93,8 91,5 0,86 354,,3 0,693 HMC 50M1-4* ,0 94,0 93,9 93,0 0,86 484,,3 1,9 HMC S ,7 94,0 94, 9,4 0,88 483,,3 1,18 59 HMC M ,9 94, 94,5 9,7 0,88 5,,3 1,53 67 HMC MB-4* ,3 94,5 94,4 93,6 0,87 710,1,,87 67 HMC 315S ,9 94,5 94,7 94,7 0,88 705,,3 3,7 840 HMC 315M ,9 94,7 94,9 94,3 0,88 850,,3 3, 930 HMC 315L ,9 94,9 95, 94,7 0, ,,3 4, HMC 315L ,9 95,1 95,3 94,8 0,89 185,,3 5,37 10 HMC 315L3-4* ,3 95, 95,3 94,7 0, ,,4 6, HMC 355M ,9 95,1 95,5 94,8 0, ,,4 8, HMC 355L ,0 95,1 95,5 94,8 0,90 05,,4 10, HMC 355LB ,5 95,3 95,5 95, 0,9 85,,4 1,4 170 HMC 400M ,9 95,5 95,6 95,4 0, ,4 3,0 14, HMC 400M ,9 95,5 95,6 95,5 0, ,4 3,0 15, 3100 HMC 400L ,0 95,6 95,7 95,6 0, ,3 3,0 18,5 300 HMC 400L ,0 96,0 96,0 95,9 0, ,4 3,0 19, HMC 400L ,1 96,0 96,1 96,0 0, ,5 3,1 1, Data at 400V 50Hz At 30V 50Hz the current is 3 x current at 400V and at 690V the current is current at 400V / 3. All other data are identical. *Motors with high power / small frame 5
6 IE / 6 pol Motor type Power Speed Current at 400V Efficiency (%) Pf Torque IM Weight kw rpm I N (A) I S /I N 1 / 1 load 3 / 4 load 1 / load cos φ T N T S /T N T M /T N J(kgm ) kg Aluminium motors HMA , ,54 6, ,67 1,0,,4 0,0005 4,0 HMA , ,61 6, ,68 1,3,,4 0,0003 4, HMA , ,70 6, ,66 1,9,,4 0, ,0 HMA ,5 90 0,90 6, ,68,7,,4 0, ,5 HMA 1-6 0, ,5 6, ,70 3,9,,4 0, HMA -6 0, ,75 6, ,7 5,8,,4 0, HMA 90S-6 0, ,9 4,5 75,9 74,4 69,6 0,65 7,5,1,7 0,003 17,5 HMA 90L-6 1,1 950,7 5,5,9,8 78, 0,71,,9 0, HMA 100L-6 1, ,6 5,5,1,1 77,3 0,68 15,3,6 0, HMA M1-6, 960 5, 5,9 83,6 83,8 81,7 0,71,3,8 0, HMA 13S-6 3, ,9 6,9 85,5 85,4 83, 0,74 9,1,8 0, HMA 13M1-6 4, ,1 7,3 85,8 85,3 8,5 0,71 39,5,9 0, HMA 13M-6 5, ,5 7,4 87,4 87, 85, 0,73 54,5,9 0, Cast iron motors HMC 160M-6 7, ,7 87, 87,1 84,3 0,78 74,1,3 0, HMC 160L ,9 88,7 88,6 85,0 0,79 108,1, 0,1 157 HMC 1L , 89,7 89,3 86,7 0,81 146,0, 0,17 06 HMC 00L1-6 18, , 90,4 90,5 88, 0,81 1,1, 0, HMC 00L ,3 90,9 90,9 88,5 0,8 14,1, 0, HMC 5M ,1 91,7 91,7 86,5 0,81 90,0,1 0, HMC 50M ,1 9, 9, 88,1 0,84 360,1, 0, HMC S , 9,7 9,6 90, 0,86 440,0,1 1, HMC M ,5 93,1 93,1 9,4 0,86 535,0,1 1, HMC 315S ,7 93,7 93,6 9,3 0,85 75,0,1 4,3 840 HMC 315M ,7 94,0 94,1 9,6 0,84 870,0,1 5,0 100 HMC 315L ,7 94,3 94,3 9,9 0, ,0,1 5, HMC 315L ,7 94,6 94,6 93,1 0,86 1,0,1 6,43 50 HMC 355M ,7 94,8 94,8 93,5 0,87 15,0,1 10, HMC 355M ,7 95,0 95,0 93,8 0, ,0,0 13, HMC 355L ,3 95,0 95,0 93,8 0,87 410,0,0 16, 1860 HMC 400M ,0 95, 95, 94,6 0, ,9,0 18,0 0 HMC 400M ,0 95,3 95,3 94,7 0, ,9,0 19,5 500 HMC 400L ,0 95,8 95,8 95,0 0, ,9,0 1,8 900 Data at 400V 50Hz At 30V 50Hz the current is 3 x current at 400V and at 690V the current is current at 400V / 3. All other data are identical. 6
7 IE / 8 pol Motor type Power Speed Current at 400V Efficiency (%) Pf Torque IM Weight kw rpm I N (A) I S /I N 1 / 1 load 3 / 4 load 1 / load cos φ T N T S /T N T M /T N J(kgm ) kg Aluminium motors HMA , ,4 5, ,60 1,3,,4 0, HMA , ,56 6, ,60 1,7,,4 0, ,5 HMA 1-8 0,18 6 0, 6, ,61,5,,4 0,0014 9,5 HMA -8 0,5 6 1,06 6, ,61 3,5,,4 0, HMA 90S-8 0, ,4 6, ,61 5,1,,4 0, HMA 90L-8 0,55 690,1 6, ,61 7,5,,4 0, HMA 100L1-8 0,75 700,4 6, ,67 10,,4 0, HMA 100L-8 1, ,3 6, ,69 15,,4 0, HMA M1-8 1, ,5 6, ,68 0,,4 0,01 34 HMA 13S-8, 710 5,7 6, ,71 30,0, 0,0 HMA 13M-8 3, ,6 5, ,73 40,0, 0, Cast iron motors HMC 160M1-8 4,0 70 9,8 7, , ,9,0 0,075 8 HMC 160M-8 5, , , ,9,0 0,093 9 HMC 160L-8 7, , , ,9,0 0,13 1 HMC 1L , , ,9,0 0,0 17 HMC 00L , , ,9,0 0,34 36 HMC 5S-8 18, , ,76 4 1,9,0 0,49 9 HMC 5M ,0 90,5 91,3 90,5 0, ,9,0 0,55 30 HMC 50M ,0 91,0 91,6 90,8 0, ,9,0 0, HMC S ,0 91,5 9,0 91,5 0, ,9,0 1,4 50 HMC M ,0 9,0 9,5 9,0 0, ,9,0 1,7 533 HMC 315S ,0 9,8 93,1 9,9 0, ,8,0 4,8 5 HMC 315M ,0 93,0 93,3 93,1 0, ,8,0 5,6 150 HMC 315L ,0 93,8 94,0 93,8 0,8 70 1,8,0 6, HMC 315L ,0 94,0 94, 94,0 0, ,8,0 7, 1350 HMC 355M ,5 94, 94,3 94, 0, ,8, HMC 355M ,5 94,5 94,7 94,6 0, ,8, HMC 355L ,5 95,0 95,1 94,9 0,83 5 1,8, HMC 400M ,5 95,0 95, 95,1 0, ,8, HMC 400L ,5 95,0 95,1 95,0 0, ,8, HMC 400L ,0 95,0 95,1 95,0 0,8 50 1,8, HMC 400L ,0 95,0 95,0 94,9 0, ,8, Data at 400V 50Hz At 30V 50Hz the current is 3 x current at 400V and at 690V the current is current at 400V / 3. All other data are identical. 7
8 15mm IE / B3 55mm F D G GD DB L HB AC HA H AD HD E C B BB LB K AA A AB Motor type Pole A AA AB AC AD B BB C D DB E F G GD H HA HB HD K L LB Aluminum motors HMA M , , , HMA M , HMA M HMA M , HMA 90S M HMA 90L M HMA 100L M HMA M M HMA M M HMA 13S M , HMA 13M M DEBUR AND Hoyer 16,5 Motors BREAK SHARP HMA 13M M Over 16,5 Hadstenvej 1654, DK Hadsten 1 55 EDGES Tel : Fax: Cast iron motors HMC 160M M NAME37 8SIGNATURE 160 0DATE , HMC 160L M , HMC 1M M , , HMC 1L M , , HMC 00L M , HMC 00L1* M , HMC 5S M , HMC 5M M ,5 710 HMC 5M1* HMC 50M M0 M0 M0 M ,5 18,5 18, HMC 50M1* M0 M HMC S M M M0 0 67, HMC M M M0 0 67, HMC MB* HMC 315S HMC 315M HMC 315L M0 M0 M0 M0 M0 M , HMC 315L3* M0 M HMC 355M M0 0 67, M HMC 355L M0 0 67, M HMC 400M M M HMC 400L M M TITLE: DO 8 *Motors with high power / small frame
9 55mm F D G GD DB P N LA T L LB HB AC AD S IE / B5 E M Motor type Pole AC AD D DB E F G GD HB L LA LB M N P S T Aluminum motors HMA M , Ø7 3 HMA M , Ø10 3 HMA M Ø10 3,5 HMA M , Ø1 3,5 HMA 90S M Ø1 3,5 HMA 90L M Ø1 3,5 HMA 100L M Ø15 4 HMA M M Ø15 4 HMA M M Ø15 4 HMA 13S M Ø15 4 HMA 13M M Ø15 4 HMA 13M M Ø15 4 Cast iron motors Hoyer Motors DEBUR AND HMC 160M M DO NOT SCALE DRAWING BREAK 350 SHARP 4-Ø18,5 5 Over Hadstenvej 4, DK-8370 Hadsten EDGES HMC 160L M Tel 670 : Ø18,5 5 Fax: HMC 1M M , Ø18,5 5 HMC 1L M ,5 9 NAME SIGNATURE DATE Ø18,5 TITLE: 5 HMC 00L M Ø18,5 5 HMC 00L1* M Ø18,5 5 HMC 5S M Ø18,5 5 HMC 5M M Ø18, M Ø18,5 5 HMC 5M1* M Ø18, M Ø18,5 5 HMC 50M M Ø18, M Ø18,5 5 HMC 50M1* M Ø18, M Ø18,5 5 HMC S M Ø18, M0 0 67, Ø18,5 5 HMC M M Ø18, M0 0 67, Ø18,5 5 HMC MB* M0 0 67, Ø18,5 5 HMC 315S M Ø M Ø4 6 HMC 315M M Ø M Ø4 6 HMC 315L M Ø M Ø4 6 HMC 315L3* M Ø4 6 HMC 355M M0 0 67, Ø M Ø4 6 HMC 355L M0 0 67, Ø M Ø4 6 HMC 400M M Ø M Ø8 6 HMC 400L M Ø M Ø8 6 *Motors with high power / small frame 9
10 IE / B14 F D G GD DB P N LA T L LB HB AC S AD E M B14A small or C DIN flange B14B big Motor type AC AD D DB E F G GD HB L LB M N P S T M N P S T Aluminum motors HMA M , M5, HMA M , M5, HMA M M6, M8 3 HMA M , M M8 3,5 HMA 90S M M M8 3,5 HMA 90L M M M8 3,5 HMA 100L M M8 3, M10 4 HMA M M M8 3, M10 4 HMA M M M8 3, M10 4 HMA 13S M M HMA 13M M M HMA 13M M M
11 F HB G GD LA L S 55mm AD D DB P N T E C B BB LB AC K AA A M AB HA H HD IE / B35 Motor type Pole A AA AB AC AD B BB C D DB E F G GD H HA HB HD K L LA LB M N P S T Aluminum motors HMA M , , , Ø7 3 HMA M , Ø10 3 HMA M Ø10 3,5 HMA M , Ø1 3,5 HMA 90S M Ø1 3,5 HMA 90L M Ø1 3,5 HMA 100L M Ø15 4 HMA M M Ø15 4 HMA M M Ø15 4 HMA 13S M , DEBUR 15 AND Ø15 4 Hoyer Motors DO NOT SCALE DRAWING BREAK SHARP HMA 13M M Over 13 Hadstenvej 16, , DK Hadsten 1 500EDGES Ø15 4 HMA 13M M Tel : Fax: , Ø15 4 Cast iron motors NAME SIGNATURE DATE TITLE: HMC 160M M , Ø18,5 5 HMC 160L M , Ø18,5 5 HMC 1M M , , Ø18,5 5 HMC 1L M , , Ø18,5 5 HMC 00L M , Ø18,5 5 HMC 00L1* M , Ø18,5 5 HMC 5M1* M , Ø18, M , Ø18,5 5 HMC 5S M , Ø18,5 5 HMC 50M M Ø18, M Ø18,5 5 HMC 50M1* M Ø18, M Ø18,5 5 HMC S M Ø18, M0 0 67, Ø18,5 5 HMC M M Ø18, M0 0 67, Ø18,5 5 HMC MB* M0 0 67, Ø18,5 5 HMC 315S M Ø M Ø4 6 HMC 315M M Ø M Ø4 6 HMC 315L M Ø M Ø4 6 HMC 315L3* M Ø4 6 HMC 355M M0 0 67, Ø M Ø4 6 HMC 355L M0 0 67, Ø M Ø4 6 HMC 400M M Ø M Ø8 6 HMC 400L M0 M Ø8 8-Ø8 6 6 *Motors with high power / small frame
12 Bearings and Cable Glands Bearings Cable glands Drive end None drive end Motor type pole pole pole pole Motor type Cable glands Blind caps HMA ZZ/C3 601-ZZ/C3 HMA ZZ/C3 601-ZZ/C3 HMA ZZ/C3 60-ZZ/C3 HMA 604-ZZ/C3 604-ZZ/C3 HMA ZZ/C3 604-ZZ/C3 HMA ZZ/C3 606-ZZ/C3 HMA 6306-ZZ/C ZZ/C3 HMA ZZ/C ZZ/C3 HMA 56 1 x M0x1,5 1 x M0x1,5 HMA 63 1 x M0x1,5 1 x M0x1,5 HMA 71 1 x M0x1,5 1 x M0x1,5 HMA 1 x M0x1,5 1 x M0x1,5 HMA 90 1 x M0x1,5 1 x M0x1,5 HMA x M0x1,5 1 x M0x1,5 HMA 1 x M0x1,5 1 x M0x1,5 HMA 13 x M5x1,5 1 x M0x1,5 HMC ZZ/C ZZ/C3 HMC 1 63-ZZ/C3 63-ZZ/C3 HMC ZZ/C3 631-ZZ/C3 HMC 00L1* 61-ZZ/C3 61-ZZ/C3 HMC ZZ/C ZZ/C3 631-ZZ/C3 HMC 5M1* 6313-ZZ/C ZZ/C ZZ/C3 HMC /C3 6314/C3 6313/C3 HMC 50M1* 6314/C3 6315/C3 6314/C3 HMC 6314/C3 6317/C3 6314/C3 HMC MB* 6317/C3 6317/C3 HMC 160 x M40x1,5 x M0x1,5 HMC 1 x M40x1,5 x M0x1,5 HMC 00 x M50x1,5 x M0x1,5 HMC 5 x M50x1,5 x M0x1,5 HMC 50 x M63x1,5 x M0x1,5 HMC x M63x1,5 x M0x1,5 HMC 315 x M63x1,5 x M0x1,5 HMC 355 x M7x,0 x M0x1,5 HMC 400 x Mx,0 x M0x1,5 HMC /C3 HMC 315L3* HMC /C3 NU319/C3 (B3) 6319/C3 (B5/B35) NU319 (B3) 6319/C3 (B5/B35) NU3/C3 (B3) 63/C3 (B5/B35) 6317/C3 6319/C3 6319/C3 6319/C3 63/C3 HMC /C3 636/C3 63/C3 636/C3 *Motors with high power / small frame Rating plate Rating table amb. temp. Amb. temp. 30 C 35 C 40 C C 50 C 55 C 60 C P/P N 1,05 1,0 1,00 0,97 0,93 0,87 0,8 400/ /90 0,88 S1-40 C , ,88 S1- C ,88 S1- C Tropical windings 1
13 NAME Tina SIGNATURE Over Hadstenvej 4, DK-8370 Hadsten Tel : Fax: DATE MATERIAL: WEIGHT: TITLE: DWG NO. SCALE:1:5 5 DO NOT SCALE DRAWING 010 Hoyer Motors All intellectual property rights and all rights in know-how in relation to this drawing may not be reproduc ed, stored, or transmitted in any form by any means (electronic, mechanical,photocopying, recording or otherwise) without the p rior written consent of Hoyer Motors. It is to be used only for the purposes specified by Hoyer Motors and for no other purpose. DRAWN CHK'D APPV'D MFG Q.A DEBUR AND BREAK SHARP EDGES SHEET 1 OF 1 REVISION Drawings and Website Drawings At hoyermotors.com both D and 3D drawings of our IE programme are available for download h SECTION A-A SCALE : 1 5 h M j A Remark A 1. Cable gland is M0X1,5 and Blind 4-M8 cap is M Hoyer Motors Over Hadstenvej 4, DK-8370 Hadsten Tel : Fax: DEBUR AND BREAK SHARP EDGES DRAWN CHK'D NAME Tina Remark SIGNATURE DATE 1. Cable gland is M0X1,5 and Blind cap is M0X1,5 Hoyer Motors TITLE: APPV'D HMA-71-B14 big MFG Q.A Kg Al MATERIAL: WEIGHT: Kg A Al DWG NO. SCALE:1:5 oyer Motors All intellectual property rights and all rights in know-how in relation to this drawing may not be reproduced, stored, or transmitted in any form by any means (electronic, mechanical,photocopying, recording or otherwise) without the prior written consent of Hoyer Mo d for no other purpose. Website On the website you will also find information about our full product range and details on our extensive stock. 13
14 Workshop and Extras Workshop In combination with the wide-ranging stock our highly skilled and certified workshop secures the most flexible stock in the business. Among other things the options for rebuild includes: Anti condensation heating ATEX Zone / (ExnA) Special bearings SPM nipples Forced fan cooling Pt100 built in thermo sensors Balancing class A or B (IEC ) IP56, IP65 and IP66 TENV (IC410) for mounting on open deck Encoders Extras Due to the shared facilities with Hoyer Transmissions we are able to provide an unique combination of extras: Pulleys Taper locks Belts Motor slides and rails Couplings Locking elements 14
15 Mounting Positions B6 B3 B5 B14 B7 V5 V1 V18 B8 V6 V V3 V19 B3/B5 B3/B14 V1/V5 V3/V6 *Important notice: V3 mounting with standard housing only accepted up to frame size 50. Motors frame size and up need special housing and flange. 15
16 Hoyer Motors, IE Motors, August 016 Head Offices Denmark Over Hadstenvej 4 DK-8370 Hadsten T F hoyermotors@hoyermotors.com hoyermotors.com Branch Offices Germany Landsberger Straße München T F germany@hoyermotors.com hoyermotors.com Benelux Vasteland BN, Rotterdam Tel Fax benelux@hoyermotors.com hoyermotors.com China 19 Jingwu Middle Road Beilun District Ningbo Zhejiang T F hoyermotors@hoyermotors.cn hoyermotors.cn Sweden Liljeholmsstranden 5 PO box SE Stockholm T F sweden@hoyermotors.com hoyermotors.com Korea 30ho Code square, Daejeo -dong Gangseo-gu Busan Korea T F korea@hoyermotors.com hoyermotors.com Important notice. Text and data in this catalogue are not binding and we reserve the right to implement changes without further notice.
Electric Motors. IE2 Motors. Marine. hoyermotors.com. IE2 Motors. GREEN responsibility
Electric Motors IE Motors Marine hoyermotors.com IE Motors GREEN responsibility Behind Hoyer Motors Svend Hoyer A/S is an international company comprising the two business units Hoyer Motors and Hoyer
More informationAC Induction Servomotors
AC Induction Servomotors HDP Series, axis height H00, H, H60, H00 from to 70 kw Technical catalogue 607/0 Contents Digit 6 7 8 9 0 6 7 Type structure: C M 0 0 0 0 0 0 0 A 0 0 0 Type of motor IP HDP C Pos.
More informationAsynchronous motors. 5/48 Permissible combinations of mechanical designs for 1PL6 motors,
Asynchronous motors 5 Asynchronous motors 5/2 Type overview and rated data 5/4 Technical definitions 5/4 Encoder systems 5/5 1PH7 motors 5/5 1PH7 motors, forced ventilation 5/32 Permissible combinations
More informationContents. Standards & Regulations. Conditions of Installations. Mechanical Design. Electrical Design. BR2 IE2 High Eff.
Contents Standards & Regulations Conditions of Installations Mechanical Design Electrical Design BR IE High Eff. Cast Iron Motor BR1 IE1 Eff. Cast Iron Motor BR Cast Iron Motor Dimensions BA IE1 Eff. Aluminium
More informationRACO-ELECTRIC CYLINDER MODULAR SYSTEM HEAVY DUTY SERIES (TYPE 1) SIZE 4,5,6,7,8
SIZE,,,, HIGH-PERFORMANCE ELECTRIC CYLINDERS: ROBUST, RELIABLE AND FLEXIBLE RETRO-FITTING The RACO actuator system is of modular design, and thus enables the combination of the most important integral
More information09LD/GD. Air-Cooled Condensers/Air-Cooled Fluid Coolers. Nominal cooling capacity kw 09LD/GD 09GD
Air-Cooled Condensers/Air-Cooled Fluid Coolers 09LD/GD 09GD 09LD/GD Nominal cooling capacity 281-987 kw The 09LD air-cooled condensers are designed for refrigeration plants where a halogenated hydrocarbon,
More informationEC centrifugal module - RadiPac
KG9-AR- ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-7467 Mulfingen Phone +49 8 8- Fax +49 8 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart
More informationEC centrifugal module - RadiPac
KG9-AS8- ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-7 Mulfingen Phone +9 798 8- Fax +9 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart
More informationEC axial fan - HyBlade
WG-HU- ebm-papst Mulfingen GmbH & Co. KG Bachmühle D- Mulfingen Phone +9 9 - Fax +9 9 - info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart HRA 59 General
More informationHigh Voltage Induction Motors. 21-MII Series. New High Efficiency Design for High Capacity Applications Up to 3,550 kw (4,750 HP)
High Voltage Induction Motors -MII Series New High Efficiency Design for High Capacity Applications Up to,0 kw (,0 HP) MII Series: Combining over 00 years of experience with innovative new technology makes
More information8 Submersible Motors Standard
Applications These motors are built for dependable operation in vertical 8 diameter or larger water wells. Basic Features Double Flanged NEMA mounting design Stainless steel splined shaft StatorShield
More informationEC centrifugal module - RadiPac
KG8-AU6-B ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-746 Mulfingen Phone +49 798 8- Fax +49 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart
More informationEC centrifugal module - RadiPac
K3G-AP25-1 ebm-papst Mulfingen GmbH & Co. KG Bachmühle 2 D-74673 Mulfingen Phone +49 7938 81- Fax +49 7938 81-11 info1@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County
More informationbidirectionally as well as the rotation sense of shafts. With absolute encoders instead, each incremental
and draw-wire sensors Spot-on and trailblazing technology measure rotation speed, sense, position, angle and length. For this purpose, they convert mechanical motion in electrical signals. There are incremental
More informationProduct Overview. Product Overview. How To Order. Flange Input - Shaft Output Right Hand Output. Flange Input - Shaft Output.
Product Overview Product Overview Flange Input - Shaft Right Hand Flange Input - Shaft Double End Shaft Input - Shaft Left Hand How To Order 5:1-60:1 ratios sizes 1.33-3.25 One piece # Fc20 all cast iron
More informationResistance thermometer With spring-loaded tip Model TR55
Temperature Resistance thermometer With spring-loaded tip Model TR55 WIKA data sheet TE 60.55 for further approvals see page 2 Applications Bearing temperature measurement on: Pumps Gears Motors Special
More informationFilter Fan Unit LIGHT
Filter Fan Unit LIGHT Type LIGHT EC Technical Concept Technical Concept Filter Fan Unit LIGHT Product Description Filter Fan Units (FFUs) from M+W Products are designed to provide clean air to individual
More informationTechnical Concept. Filter Fan Unit LIGHT. Type LIGHT AC Type LIGHT EC
Technical Concept Filter Fan Unit LIGHT Type LIGHT AC Type LIGHT EC Filter Fan Unit LIGHT Technical Concept Product Description Filter Fan Units (FFUs) from M+W Products are designed to provide clean air
More informationFEATURES APPLICATIONS OPERATING DATA MATERIALS OF CONSTRUCTION. Flood control
APPLICATIONS FEATURES Flood control Irrigation Land drainage Pollution control Industry Water refineries Water parks Design OPERATING DATA Capacity:...up to.000 m/h Head:...up to m Max. water temperature:...0
More information1. General introduction 2. MOUNTING ARRANGEMENT
1. General introduction OME series three phase asynchronous motor is high efficiency electric motor with cast iron housing. Its indicators are in line with the European standard. The high efficiency motor
More informationStandard Circulating Pumps
Product review Range: 1 1 3Q [ m³/h] Hz - North America 1 3 1 1 1.x1 1.x x x3 x 1 1 Q [ US gpm] >Single-head pumps: Seal-less circulator with flanged connection. Two speed, manually adjustable to match
More informationData is only for informational purpose. All specifications are subject to change without notice.
MV Data is only for informational purpose. All specifications are subject to change without notice. 1 First in knife gate 2018-12-19 solutions issue 24 Knife gate valve MV Stafsjö s knife gate valve MV
More informationRotary Measuring Technology Absolute encoders, Singleturn, Profibus-DP
Safety-Lock TM High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable Increased ability
More informationVLT Integrated Servo Drive ISD 510 flexible and open system
Selection Guide VLT Integrated Servo Drive ISD 510 flexible and open system 1.7-13 Nm torque range gives you more design fl exibility in your decentralised system plans www.danfoss.com/drives Decentralised
More informationRotary Measuring Technology Absolute encoders, Multiturn, Profibus-DP
Mechanical drive Safety-Lock TM High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable
More informationAbsolute Rotary Encoder EXAG Explosion Proof. Profibus-DP
PROCESS FIELD BUS Main Features - Approval II 2 G/D EEx d II C T6 - Heavy-duty industrial model - Certified: By Profibus Trade Org., CE - Interface: - DPV2-Functionality - max. 65536 steps per revolution
More informationILA1F572PB1A0 integrated drive ILA with servo motor V - CANopen - PCB connector
Characteristics integrated drive ILA with servo motor - 24..36 V - CANopen - PCB connector Main Range of product Product or component type Device short name Motor type Number of motor poles 6 Network number
More informationTD End-Suction Pumps. Operating data Flow rates up to 300 l/sec Head up to 160 metres Temperature 20 0 C to C
TD End-Suction Pumps One of the broadest ranges of pumps available from any British manufacturer, with discharge sizes from mm to 0 mm. Widest choice of materials of construction and options to suit many
More informationTechnical Concept. Filter Fan Unit RETURN AIR. Type RA-AC Type RA-EC
Technical Concept Filter Fan Unit RETURN AIR Type RA-AC Type RA-EC Filter Fan Unit RETURN AIR Technical Concept Product Description Technical Data M+W Products Filter Fan Units RETURN AIR (FFU-RA) are
More informationClose-coupled centrifugal pumps
CombiBloc Close-coupled centrifugal pumps CombiBloc CombiBloc is the premier solution for pumping clean thin liquids in a very cost-effective way. The pump is part of Johnson Pump s Combi-system, a modular
More informationSITRANS T measuring instruments for temperature
Overview for flexible and cost-effective temperature measurements Supports the standard (HART V 7.1) Very high security level for wireless data transmission Built-in local user interface (LUI) with -button
More informationAbsolute encoders - modular bus covers
BMMH 58 flexible with blind hollow shaft Features Encoder single- or multiturn / bus cover Robust magnetic sensing Resolution: singleturn bit, multiturn 8 bit Modular fieldbus interfaces CANopen /DeviceNet/EtherCAT/EtherNet-IP
More informationImmersion Temperature Sensors
1 782 1782P01 Symaro Immersion Temperature Sensors QAE2164 QAE2174 Active sensors for acquiring the water temperature in pipes and tanks Operating voltage AC 24 V or DC 13535 V Signal output DC 010 V or
More informationRotary Measurement Technology Absolute Encoders, Multiturn
-40 to 80 C IP Mechanical drive Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection
More informationAbsolute Encoders Multiturn
The multiturn encoders 5868 and 5888 with interface and optical sensor technology are ideal for use in all applications with a interface. The encoder supports the isochronous (IRT) mode and is therefore
More informationFrame, End Brackets, & Conduit Box With Heavy Gauge Steel Fanguard and Non-sparking Fan, for Severe
W Series 143T-447T - TEFC Heavy Duty Construction Frame, End Brackets, & Conduit Box With Heavy Gauge Steel Fanguard and Non-sparking Fan, for Severe Single Phase 56/56C : RF - Removable Feet TM - Thermistors
More information2CP. Centrifugal twin-impeller pumps
CP Centrifugal twin-impeller pumps Clean water Domestic use Civil use Industrial use PERFORMANCE RANGE Flow rate up to l/min (7 m³/h) Head up to m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid
More informationFC-DIN DIN-Rail Mount Fan Speed Controller
Page 1 of 7 FC-DIN DIN-Rail Mount Fan Speed Controller Features: Benefits: Volume or velocity reduction Suitable for supply & extract systems Minimum and maximum speed adjustment DIN-Rail mountable Configurable
More informationRotary Measurement Technology Absolute Encoders, Singleturn
-40 to 80 C IP Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable
More informationThreaded resistance thermometer Miniature design Model TR10-D
Temperature Threaded resistance thermometer Miniature design Model TR10-D WIKA data sheet TE 60.04 for further approvals see page 2 Applications Machine building, plant and vessel construction Propulsion
More informationChiller. CG 010 to 130. Remote Air Cooled Condensers Engineering Data Manual. 9.4 to 131 kw
Chiller CG 010 to 130 Remote Air Cooled Condensers Engineering Data Manual 9.4 to 131 kw Specifications Unit identification CG. O. O55. FSC. R407C LN Configuration Refrigerant rpm fans Size Air flow Remote
More informationElectric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 NPT
1/4 to 2 NPT Features Direct mount ISO5211 Full Port 316 stainless steel ball valve 1000 PSI working pressure at 100 F (38 C) Highly visual dome style valve position indicator Rugged aluminum Type 4X weatherproof
More informationArgenta W A L L M O U N T I N G M E T A L C A B I N E T S
Argenta W A L L M O U N T I N G M E T A L C A B I N E T S The ARGENTA Series is a group of metal enclosures used to house on the inside electrical or electronic switchgear, controlgear and equipment necessary
More information8 Submersible Motors Hi-Temp 75
Applications These motors are built for dependable operation in vertical 8 diameter or larger wells, in applications with higher temperature, higher thrust or low flow. Basic Features Able to operate in
More informationComplete Solutions from Specialists. Rotary encoders for geared motors: 5820 M-Line
Rotary encoders for geared motors: 5820 M-Line Complete Solutions from Specialists Stable: Even under the toughest of uses. Versatile mounting options with individual torque arm solutions. Economic: Can
More informationThreaded thermocouple Miniature design Model TC10-D
Temperature Threaded thermocouple Miniature design Model TC10-D WIKA data sheet TE 65.04 for further approvals see page 2 Applications Machine building, plant and vessel construction Propulsion technology
More informationDESIGNED FOR THE FUTURE A NEW CONCEPT IN HATCH VENTILATION SYSTEMS
DESIGNED FOR THE FUTURE A NEW CONCEPT IN HATCH VENTILATION SYSTEMS THINGS HAVE CHANGED, AND SO HAVE VENTILATION SYSTEMS. WALL SYSTEM HATCH SOLUTIONS ROOF SYSTEM A NEW CONCEPT IN HATCH VENTILATION SYSTEMS.
More informationSurface-mounting Thermostats AM Series with 1 or 2 single-pole snap-action switches IP40 protection
Page 1/6 Surface-mounting Thermostats AM Series with 1 or 2 single-pole snap-action switches IP40 protection Brief description Surface-mounting thermostats control and monitor thermal processes. Thermostats
More informationProduct Details. Contents. Features and Mounting Options for SUNNY STRING-MONITOR SSM24-11
Technical Information Product Details Features and Mounting Options for SUNNY STRING-MONITOR SSM24-11 Contents The Sunny String Monitor SSM24 11 is specifically designed for monitoring large PV generators.
More informationIBM Symposium Data Center Cooling. EC Systems for HVAC architecture and Direct air Cabinet Cooling
IBM Symposium 2008 Data Center Cooling EC Systems for HVAC architecture and Direct air Cabinet Cooling Presented by David J. Spofford Product Manager IT/Telecomm 1 Agenda Data Center trends for IT and
More informationProduct Information ECN 1324S EQN 1336S. Absolute Rotary Encoders with DRIVE-CLiQ Interface for Safety-Related Applications
Product Information ECN 1324S EQN 1336S Absolute Rotary Encoders with DRIVE-CLiQ Interface for Safety-Related Applications 112015 ECN 1324S, EQN 1336S Rotary encoders for absolute position values with
More informationIntelligent Positioning Drive GEL 6111 CANopen, PROFIBUS DP, Ethernet etc.
Intelligent Positioning Drive GEL 6111 CANopen, PROFIBUS DP, Ethernet etc. Technical Information Version 11.10 Features Nominal torque 5 Nm Self-locking system for wear-free holding torque On-board controls
More informationHANKIA. DSV type. Single stage,vertical Axially split case double suction pump
DSV type Single stage,vertical Axially split case double suction pump High efficiency and low pulsation Wind performance range with up to 280m head Stable service and low maintenance Heavy duty design
More informationShaft Speed: Shock: Vibration: Bump:
Explosion Proof / Absolute Type EXAG - CANopen Ex d - Proof Shaft Encoder - Ø 78 mm Shaft: Ø 10 mm CANopen communication profile according to DS 301; Programmable according to Class 2 Resolution up to
More informationContact Dial Thermometers
Data sheet 6852 Page 1/11 Contact Dial Thermometers FL 21 Special features Class 1.5 Display range -4 C to +6 C Temperature controller with actual value display as built-in or add-on device in a stainless
More informationAbsolute Encoders Multiturn
The Sendix multiturn encoders 5868 and 5888 with CANopen or CANlift interface and optical sensor technology are the right encoders for all CANopen or CANlift applications. With a maximum resolution of
More informationStandard Circulating Pumps
Product review Range: 1 1 3Q [ m³/h] Hz - North America 1 3 1 1 1.x1 1.x x x3 x 1 1 Q [ US gpm] >Single-head pumps: Circulating pumps with flanged connection > Applications: Drinking-water circulation
More informationL P Linn-Pumpen GmbH. Submersible Vertical Electric pumps. SVI Series. with high efficiency PLM motors. SVI Series MARKET SECTORS INDUSTRIAL, CIVIL.
Submersible Vertical Electric pumps with high efficiency PLM motors MARKET SECTORS INDUSTRIAL, CIVIL. APPLICATIONS Pumping of coolants, lubrificants and condensate. Machine tools, welders, engine test
More informationL P Linn-Pumpen GmbH. Electric-gear-pumps series FKM
Electric-gear-pumps series FKM Construction Self-priming electric-gear-pumps, bellhousing with foot-flange, pump-casing in cast iron. Gear-pumps series FKM with motor-power up to 1,5. Suction- and -ports
More informationType EXAG - Profibus. Explosion Proof / Absolute. Ex d - Proof Hollow Shaft Encoder - Ø 78 mm
Explosion Proof / Absolute Type EXAG - Profibus Ex d - Proof Encoder - Ø 78 mm Hollow Bore: Ø 14 mm, Ø 16 mm and Ø 1 inch Profibus DPV2 Functionality Resolution up to 30 bits Removable End Cap for on-site
More informationshop online:
Process systems Liquid ring vacuum pumps Single stage pumps 8 Alpha series single stage liquid ring vacuum pumps 9 AL series single stage liquid ring vacuum pumps 97 Two stage pumps 00 SHR series liquid
More informationPositioning Systems Linear Module
Positioning Systems Linear Module CRD Devices Ltd All Saints Industrial Estate, Shildon, Co, Durham, DL4 2RD Tel: +44 (0)1388 778400 Fax: +44 (0)1388 778800 E: sales@crd-devices.co.uk W: www.crd-devices.co.uk
More informationtemperature rise for easy conversion to F1, F2, F3 washdown duty enclosure both brackets for increased
W Series 56/56C, 3 Phase - TEFC Cast Construction Single Phase : RF - Removable Feet EI Lightweight High Performance Cast Frames. Features Include: MG1-Part 31 inverter duty 15:1 constant torque, 20:1
More informationEncoder WDGA 58A PROFINET-IO (cov)
Encoder WDGA 58A PROFINET-IO (cov) www.wachendorff-automation.com/wdga58apnb Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard
More informationShaft Speed: Shock: Vibration: Bump:
Explosion Proof / Absolute Type EXAG - Profibus Ex d - Proof Shaft Encoder - Ø 78 mm Shaft: Ø 10 mm Profibus DPV2 Functionality Resolution up to 30 bits Removable End Cap for on-site modifications ATEX,
More informationSense it! Connect it! Bus it! Solve it! ENCODERS
Sense it! Connect it! Bus it! Solve it! ENCODERS Incremental encoders Incremental encoders use electrical pulses to measure rotation speed or position. The dual-channel incremental encoders of the Ri series,
More informationEmergency Luminaire for Fluorescent Lamps Series EXLUX 6009
> As wall, ceiling and pendant light fitting or pole mounted light fitting > Version with 2 lamps: 18 W and 36 W > Central locking > All-pole disconnection via N/C switch when opening light fitting or
More informationSeries 3730 Type Electropneumatic Positioner
Series 3730 Type 3730-0 Electropneumatic Positioner Application Single-acting or double-acting positioner for attachment to pneumatic control valves Set point Travel 4 to 20 ma 5.3 to 200 mm The positioner
More informationPrecision digital pressure gauge Model CPG1500
Calibration technology Precision digital pressure gauge Model CPG1500 WIKA data sheet CT 10.51 for further approvals see page 4 Applications Oil and gas industry Maintenance and service facilities Calibration
More informationConveyor Belt Alignment Switches from IDEM
Conveyor Belt Alignment Switches from IDEM Data Sheet Die-Cast Models Python Line Series Stainless Steel Models Using Conveyor Belt Alignment Switches Application: Conveyor Belt Alignment switches are
More informationNEOSTAR AXIAL FAN CONDENSER COMMERCIAL AND INDUSTRIAL RANGE HFC. 18 > 1240 kw. NEOSTAR POWER The choice of performance and low space requirement.
AXIAL FAN CONDENSER COMMERCIAL AND INDUSTRIAL RANGE Hard Discount - Supermarkets - Hypermarkets Refrigerated storage and transit stocking - Dispatch centres Food processing - Canteen kitchens HFC 18 >
More informationIncremental Encoder with Hollow Shaft
Incremental Encoder Type RI 36-H n miniature industry encoder for high number of pulses n short mounting length n easy mounting procedure n Application e.g.: - Motors - Machine tools - Packaging Machines
More informationRotary Position Technology Incremental Encoders
-40 to 85 C IP Safety-Lock High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Optical sensor
More informationPower Electronics. Semiconductor relay / - contactor
Power Electronics Semiconductor relay / - contactor PH 9260 POWERSWITCH 0247349 Semiconductor relay PH 9260.91 Semiconductor contactor PH 9260.91/000/01 AC semiconductor relay / -contactor According to
More informationCircuit Breakers Type CTI 25M, CTI 45MB
Data sheet Circuit Breakers Type CTI 25M, CTI 45MB Circuit breakers for short circuit and overload protection of motor applications cover the current range 0.1 45 A (AC-3 rating). The product range is
More informationMaterial: Weight: Bearing Life: Shaft Speed: Shaft Loads: Shock: Vibration: Bump:
Encoder Description EXAG SSI / Hollow Shaft EXAG SSI Hollow Shaft Encoder - Ø 78 mm Hollow Bore: Ø 14 mm and Ø 16 mm Synchronous Serial Interface (SSI) (RS422/TTL) Resolution up to 30 bits for on-site
More informationTykoflex cold method. A safe, simple and proven cold method TYKOFLEX COLD METHOD
Tykoflex cold method A safe, simple and proven cold method TYKOFLEX COLD METHOD Our new cold compression method Tykoflex cold compression method has bushings for micro cables in the size range of Ø.8-9.5
More informationRoom sensors QFA4160 QFA41 D AQF4150 AQF3153. Symaro. for relative humidity and temperature with calibration certificates
1 859 1859P01 1859P02 1859P04 QFA4160 QFA41 D AQF4150 AQF3153 Symaro Room sensors for relative humidity and temperature with calibration certificates QFA41 Operating voltage AC 24 V / DC 13.5...3 Signal
More informationRotary Position Technology Absolute Encoders, Singleturn
-20 to 85 C High rotational speed Temperature Shock/vibration resistant Short-circuit proof Reverse polarity protection Optical sensor Magnetic field proof Rugged Highest shock resistance on the market:
More informationAbsolute encoders - bus interfaces
Features Absolute encoder multiturn Optical sensing method Max. resolution: singleturn 18 bit, multiturn 16 bit LED status indicator PROFINET IO Maximum resistant against magnetic fields Optional EAL580
More informationRA /2.95. Gear Pump Model G2 (Series 4X) For Flange Mounting with SAE threaded Ports. Functional description. Symbols
/2.9 Gear Pump Model G2 (Series X For Flange Mounting with SE threaded Ports s to 22... 6 PSI (2 bar....7 in /rev. (22. cm /rev. /2.9 eplaces: 2.92 New principle of sealing the pump body, increases service
More informationFloat Switches with Permanent Magnet For Vertical Installation Model RSM
Level Measurement Float Switches with Permanent Magnet For Vertical Installation Model RSM WIKA Data Sheet LM 30.01 Applications Level measurement for almost all liquid media Pump/level control and monitoring
More informationType EXME - DeviceNet
Explosion Proof - Mining / Absolute Type EXME - DeviceNet Ex d - Proof Shaft Encoder - Ø 78 mm Shaft: Ø 10 mm DeviceNet communication protocol Resolution up to 30 bits Removable End Cap for on-site modifications
More informationABSOLUTE ROTARY ENCODER PROFIBUS-DP
PROCESS FIELD BUS Main Features - Compact and Heavy-Duty Industrial Model - Certified: By Profibus Trade Org., CE - Interface: Profibus-DP - DPV2-Functionality - Housing: 58 mm - Full or Hub Shaft: 6 or
More informationClamping Device, Series 2709
Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Clamping Device, Series 2709 Technical data Pneumatic Open mechanism Technical Data Type Power transmission
More informationHan R 23. Circular Connector. Certified acc. to DIN EN ISO 9001 in design/ development, production, installation and servicing.
Circular Connector Certified acc to DIN EN ISO 9001 in design/ development, production, installation and servicing Data Sheet 0039-4 Circular Connectors Features Size R 23 Outer diameter 26 mm High contact
More informationProviding flexible power supply and signal connection there, where it is needed even in hazardous areas for the Zones 1and 2.
e X L i n k exlink 7-pole / 6-pole + PE for Zone 1 and Zone 21 Providing flexible power supply and signal connection there, where it is needed even in hazardous areas for the Zones 1and 2. The exlink 7
More informationEXAG - Dual Output Profibus / Incremental
Explosion Proof Profibus / Incremental EXAG Dual Output Profibus / Incremental Electrical Specifications General Ex d Proof Shaft Encoder Shaft: Profibus DPV2 Functionality Absolute Resolution up to 30
More informationIncremental encoders Solid shaft with clamping or synchro flange pulses per revolution
GI55, GI56 Features Encoder with solid shaft ø mm or ø6 mm Max. 6000 pulses per revolution Optical sensing method Clamping or synchro flange Industrial standard High rotation speed up to 000 rpm Optional
More informationProduct Information ECI 1118 EQI 1130 ECI 1119 EQI Absolute Rotary Encoders without Integral Bearing
Product Information ECI EQI 0 ECI 9 EQI Absolute Rotary Encoders without Integral Bearing 0 ECIEQI 00 Absolute rotary encoders Synchro flange 0F) for axial mounting Blind hollow shaft A) Without integral
More informationMCF lightning arrestor
MCF lightning arrestor Spark gap technology for 400/690 V network systems Building Connections Highest system availability under the toughest conditions. MCF lightning arrestors protect machines and systems
More informationBox Fans Air Handling Units Air Distribution Products Fire Safety Air Curtains and Heating Products Tunnel Fans. Systemair Box Fans
Box Fans Air Handling Units Air Distribution Products Fire Safety Air Curtains and Heating Products Tunnel Fans Systemair Box Fans KVD, KVB, KPD & KPB Systemair Group Systemair (Sweden) Systemair (Spain)
More informationRotary Measurement Technology Absolute Encoders, Singleturn
-20 to 85 C High rotational speed Temperature Shock/ vibration resistant Short-circuit proof Reverse polarity protection Rugged Highest shock resistance on the market: ( 200 g (2,500 m/s 2 )), 6 ms acc.
More informationCircuit Breakers, Type CTI 25M, CTI 45MB, CTI 100
MAKING MODERN LIVING POSSIBLE Data sheet Circuit Breakers, Type CTI 25M, CTI 45MB, CTI 100 Circuit breakers for short circuit and overload protection of motor applications cover together with the circuit
More informationShaft: Ø 10 mm and ø 12 mm. Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Rotor Mass Moment of Inertia: Shaft Loads:
EXAG Profibus /Shaft EXAG - Profibus Shaft Encoder - Ø 78 mm Shaft: Ø 10 mm and ø 12 mm Profibus DPV2 Functionality Resolution up to 30 bits Removable End Cap for on-site modifications ATEX, IECEx, and
More informationProduct Information ROC 425 ROQ 437. Absolute Rotary Encoders with EnDat 2.2 for Safety-Related Applications
Product Information ROC 425 ROQ 437 Absolute Rotary Encoders with EnDat 2.2 for Safety-Related Applications 10/2016 ROC 425, ROQ 437 with synchro flange Rotary encoders for absolute position values with
More informationRoHS. High shaft load capacity. Shock / vibration resistant
Due to their sturdy bearing construction in Safety-Lock Design, the Sendix 5000 and 5020 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up
More informationProduct Information ROC 425 ROQ 437. Absolute Rotary Encoders with Solid Shaft for Safety-Related Applications
Product Information ROC 425 ROQ 437 Absolute Rotary Encoders with Solid Shaft for Safety-Related Applications 2/2016 ROC 425, ROQ 437 with synchro flange Rotary encoders for absolute position values with
More information4 mm. 8 mm. Proximity Sensor. Sensing head Sensing distance Output configuration Part Number M18 Shielded 4 mm DC 3-wire PNP-NO E2EZ-X4B1 M30
Sensing distance Supply voltage Output 4 mm 8 mm 12 to 24 VDC 100 to 220 VAC 200 ma max. 100 ma max. Proximity Sensor Detects Objects without Being Influenced by Aluminum and Cast Iron Cut Chips Sense
More informationThermostat KP. Data sheet. The KP Thermostats are single-pole, doublethrow (SPDT) temperature-operated electric switches.
Data sheet Thermostat KP The KP Thermostats are single-pole, doublethrow (SPDT) temperature-operated electric switches. They can be connected directly to a single-phase AC motor of up to approx. 2 kw or
More information