GEN series G072. Data sheet. 230 Volt RMS Isolated Digital Event adapter. Special features

Transcription

1 GEN sris G Volt RMS Isolatd Digital Evnt adaptr Data sht Spcial faturs - 32 digital vnt input channls - 4 digital vnt output channls V RMS vnt channl isolation - Full channl to channl isolation - Rmovabl scrw trminals for quick cabl connctions - Dirct intrfac to GEN DAQ mainfram vnt connctor - GEN DAQ mainfram to adaptr cabl includd - No xtrnal powr supply rquird - Optional cabl st to connct to GN6470 or GN Volt RMS Isolatd Digital Evnt adaptr Th isolatd Digital Evnt Adaptr provids an isolation barrir for up to 32 digital vnt input channls. Furthrmor 4 vnt output channls ar availabl if th adaptr is connctd to th Digital Evnt/Timr/Countr connctor of GEN DAQ mainframs. Th adaptr can optionally b connctd dirctly to th GEN DAQ Binary Markr Timr/Countr card. Using th isolatd Digital Evnt Adaptr allows th usr to avoid ground loops and improvs immunity to lctrical noisy nvironmnts. Th channl to channl and channl to ground isolation voltag is 230 V RMS. Th standard input voltag of V for logic 1 can b incrasd by using xtrnal rsistors. Thrfor highr voltag lvls can b usd for logic 0 and 1. Th wiring of th signal cabl is asy du to th pluggabl scrwd joint connctors of th adaptr. For asy connctivity th adaptr is powrd by th GEN DAQ mainfram or th GEN DAQ Binary Markr Timr/Countr card to avoid th nd for a sparat powr supply. B n

2 Isolatd Digital Evnt Adaptr Block Diagram 32 X Isolatd Input A FODM8071 5V K 50Ω 26 pin HD fmal To markr card (1) (cabl not includd) 32 X 26 pin HD fmal To markr card (1) (cabl not includd) 4 X Isolatd ouput (only from mainfram digital IO) To mainfram shild (optional) C VOS617A 430Ω E I c 44 pin HD mal To mainfram Digital Evnt/Timr/Countr connctor (1) (cabl includd) 4 X Figur 1.1: Block Diagram Adaptr (1) Mainfram and markr card output can not b usd simultanously. HBM 2 B n

3 Evnt Inputs Inputs 32 vnt channls (Anod, Cathod optocouplr with sris rsistor 562 Ω) Isolation voltag Isolation dvic Switching frquncy Maximum propagation dlay Common mod transint voltag 230 V AC RMS or DC (channl to channl and channl to chassis/arth) Fairchild FOD8071 optocouplr (or comparabl) 10 MHz input block signal tstd. Maximum supportd frquncy for th systm is limitd by th isolator box or acquisition systm, whichvr is th lowst 55 ns Input switching voltags (s Figur 1.2 and Figur 1.3) 20 kv/μs typical Logic 0 < 1.0 V A (562 Ω R xt ) Logic 1 > 1.3 V A (562 Ω R xt ) Maximum nondstructiv voltag 1.8 V A (562 Ω R xt ) Minimum nondstructiv rvrs voltag -5.0 V Isolatd Input U xtrnal Rxt A FODM8071 5V 50Ω Data K Figur 1.2: Add an xtrnal rsistor to chang input voltag lvls Uxtrnal [V] R xt [kω] 350 Uxtrnal [V] R xt [kω] Uxtrnal [V] Logic 0 Logic 1 Maximum Minimum R xt [kω] Figur 1.3: Dtaild input voltag lvls (top lft and right)/nondstructiv input voltags (blow) B n 3 HBM

4 Evnt Outputs Output channls Isolation dvic Output frquncy Nondstructiv control voltags (s Figur 1.4 and Figur 1.5) Maximum voltag Minimum voltag 4 digital isolatd output channls (opn Collctor, Emittr) Only supportd by Digital Evnt/Timr/Countr connctor Vishay VOS617A optocouplr (or comparabl) 170 khz output signal tstd. Maximum usabl frquncy for th systm is limitd by th Isolatd Digital Evnt Adaptr or acquisition systm, whichvr is th slowst * R xt and < 80 V -7.0 V U control Rxt C Data E I c Isolatd Output (only from mainfram digital IO) VOS617A 430Ω Mainfram digital IO Figur 1.4: Add an xtrnal rsistor to chang output voltag lvls U xtrnal [V] Maximum Minimum R xt [kω] Figur 1.5: Nondstructiv output voltags Output Connctors (Only on output connctor option can b usd at th sam tim) Digital Evnt/Timr/Countr HD22 sub-d 44 pin mal (conncting cabl includd) Digital markr group A and B 15 pin, fmal sub-d typ (conncting cabl 1-KAB , to b ordrd sparatly) Output Cabls GEN DAQ mainfram to adaptr 0.7 m (2.30 ft), includd with adaptr GEN DAQ markr card to adaptr 1-KAB , 1.5 m (4.92 ft) nds to b ordrd sparatly Powr GEN DAQ mainfram to adaptr Powrd by GEN DAQ mainfram or markr card HBM 4 B n

5 Adaptr Front Connctor Pinning A1 A2 A5 A6 OUTPUT Vc max : 80 V Vc max : 7 V lc max : 50 ma A1 A2 A3 A4 A7 A8 B1 B2 INPUT OUTPUT Vin low : < 0.8 V Vc max : 80 V Vin high : 4.5 V V Isolation : 230 V RMS Vc max : 7 V lc max : 50 ma A1 A2 A5 A6 A9 A10 A13 A14 B1 B2 B5 B6 B9 B10 B13 B14 A1 A2 A3 A4 A7 A8 A11 A12 A15 A16 B3 B4 B7 B8 B11 B12 B15 B16 B1 B2 Figur 1.6: G072 front connctors Isolatd Digital Evnt Input Cabl Connctor Dtails Figur 1.7: Input connctor Cabl connctor typ Widmullr BL 3.50/04/180 SN or BX (Widmullr ordring numbr ) 1 x 4 pol cabl scrw clamping (Includd with adaptr, 18 pics total) B n 5 HBM

6 Adaptr Rar Connctor Pinning DIGITAL EVENT/TIMER/COUNTER DIGITAL MARKER GROUP B DIGITAL MARKER GROUP A HBM inc. Marlborough, MA, USA 1-G072-2 Isolatd Digital Evnt Adaptr Figur 1.8: G072 back sid connctors PIN 1 - Evnt Input 1A & Rst Timr/Countr 2A PIN 2 - Evnt Input 2A & Dirction Timr/Countr 2A PIN 3 - Evnt Input 3A & Clock Timr/Countr 2A PIN 4 - Evnt Input 4A PIN 5 - Evnt Input 5A PIN 6 - Evnt Input 6A PIN 7 - Evnt Input 7A PIN 8 - Evnt Input 8A PIN 9 - Evnt Input 9A PIN 10 - Evnt Input 10A & Rst Timr/Countr 1A PIN 11 - Evnt Input 11A & Dirction Timr/Countr 1A PIN 12 - Evnt Input 12A & Clock Timr/Countr 1A PIN 13 - Evnt Input 1B & Rst Timr/Countr 2B PIN 14 - Evnt Input 2B & Dirction Timr/Countr 2B PIN 15 - Evnt Input 3B & Clock Timr/Countr 2B PIN 16 - Evnt Input 4B PIN 17 - Evnt Input 5B PIN 18 - Evnt Input 6B PIN 19 - Evnt Input 7B PIN 20 - Evnt Input 8B PIN 21 - Evnt Input 9B PIN 22 - Evnt Input 10B & Rst Timr/Countr 1B PIN 23 - Evnt Input 11B & Dirction Timr/Countr 1B PIN 24 - Evnt Input 12B & Clock Timr/Countr 1B PIN 25 - Evnt Input 13B PIN 26 - Evnt Input 14B PIN 27 - PIN 28 - PIN 29 - PIN 30 - PIN 31 - Evnt Input 15B & Extrnal Stop B PIN 32 - Evnt Input 16B & Extrnal Start B PIN 33 - Evnt Input 13A PIN 34 - Evnt Input 14A PIN 35 - Evnt Input 15A & Extrnal Stop A PIN 36 - Evnt Input 16A & Extrnal Start A PIN 37 - Evnt Output 2B PIN 38 - Evnt Output 1B PIN 39 - Evnt Output 2A PIN 40 - Evnt Output 1A PIN 41 - PIN 42 - PIN 43-5 V Powr PIN 44-5 V Powr Figur 1.9: Pin assignmnt for Digital Evnt/Timr/Countr connctor Pin numbr GROUP A GROUP B Pin numbr GROUP A GROUP B PIN 1 A 16 B 16 PIN 2 A 15 B 15 PIN 3 A 14 B 14 PIN 4 A 13 B 13 PIN 5 A 12 B 12 PIN 6 A 11 B 11 PIN 7 A 10 B 10 PIN 8 A 9 B 9 PIN 9 A 8 B 8 PIN 10 A 7 B 7 PIN 11 A 6 B 6 PIN 12 A 5 B 5 PIN 13 A 4 B 4 PIN 14 PIN 15 PIN 16 PIN 17 PIN 18 PIN 19 PIN 20 PIN 21 PIN 22 PIN 23 PIN 24 PIN 25 PIN 26 A 3 A 2 B 19 B 18 A 1 B 1 5 V 5 V 5 V 5 V Figur 1.10: Digital Markr group A/B pinning HBM 6 B n

7 Isolatd Input Application Exampls Isolatd Input U xtrnal Data Rxt A K FODM8071 5V 50Ω GHS Markr card / Mainfram digital IO Figur 1.11: Isolatd input switchd on ngativ input Isolatd Input Data U xtrnal Rxt A K FODM8071 5V 50Ω GHS Markr card / Mainfram digital IO Figur 1.12: Isolatd input switchd on positiv input B n 7 HBM

8 Isolatd Output Application Exampls (Only Supportd by Digital Evnt/Timr/Countr Connctor) U control Rxt C Data E I c Isolatd Output (only from mainfram digital IO) VOS617A 430Ω Mainfram digital IO Figur 1.13: Isolatd output switchd on ngativ output Data/U control Rxt C E I c Isolatd Output (only from mainfram digital IO) VOS617A 430Ω Mainfram digital IO Figur 1.14: Isolatd output switchd on positiv output HBM 8 B n

9 Physical, Wight and Dimnsions Wight Adaptr 0.75 kg (1.65 lbs) Dimnsions Hight 54.6 mm (2.15 ) Width mm (6.76") Dpth mm (4.86") ing Using shild of GEN DAQ cabl connction Casing Aluminum 54.6 mm (21.5 ) INPUT OUTPUT Vin low : < 0.8 V Vc max : 80 V Vin high : 4.5 V V Isolation : 230 V RMS Vc max : 7 V lc max : 50 ma A1 A2 A5 A6 A9 A10 A13 A14 B1 B2 B5 B6 B9 B10 B13 B14 A1 A2 B3 B4 B7 B8 B11 A3 A4 A7 A8 A11 A12 A15 A16 B12 B15 B16 B1 B mm (6.76 ) mm (5.12 ) Figur 1.15: G072 Dimnsions B n 9 HBM

10 Environmntal Spcifications Tmpratur Rang Rlativ humidity Protction class Altitud Shock: IEC Vibration: IEC Oprational Environmntal Tsts Oprational Non-oprational (Storag) Oprational Non-oprational Oprational Non-oprational Cold tst IEC Tst Ad Dry hat tst IEC Tst Bd Damp hat tst IEC Tst Ca Non-Oprational (Storag) Environmntal Tsts Cold tst IEC Tst Ab Dry hat tst IEC Tst Bb Chang of tmpratur tst IEC Tst Na Damp hat cyclic tst IEC Tst Db variant 1 0 C to 40 C (32 F to 104 F) -25 C to 70 C (-13 F to 158 F) 0 % to 80 %; non-condnsing; oprational IP20 Maximum 2000 m (6562 ft); oprational Half-sin 10 g/11 ms; 3-axis, 1000 shocks in positiv and ngativ dirction Half-sin 25 g/6 ms; 3-axis, 3 shocks in positiv and ngativ dirction 1 g RMS, ½ h; 3-axis, random 5 to 500 Hz 2 g RMS, 1 h; 3-axis, random 5 to 500 Hz -5 C (23 F) for 2 hours 40 C (104 F) for 2 hours 40 C (104 F), humidity >93 % RH for 4 days -25 C (-13 F) for 72 hours 70 C (158 F) humidity <50 % RH for 96 hours -25 C to 70 C (-13 F to 158 F) 5 cycls, rat 2 to 3 minuts, dwll tim 3 hours 25 C/40 C (77 F/104 F), humidity >95/90 % RH 6 Cycls, cycl duration 24 hours Harmonizd Standards for CE complianc, According to th Following Dirctivs Low Voltag Dirctiv (LVD): 2006/95/EC ElctroMagntic Compatibility Dirctiv (EMC): 2004/108/EC Elctrical Safty EN (2010) EN (2010) Elctromagntic Compatibility EN (2013) Emission EN Immunity EN EN EN EN Safty rquirmnts for lctrical quipmnt for masurmnt, control, and laboratory us - Gnral rquirmnts Particular rquirmnts for tsting and masuring circuits Elctrical quipmnt for masurmnt, control and laboratory us - EMC rquirmnts - Part 1: Gnral rquirmnts Industrial, scintific and mdical quipmnt - Radio-frquncy disturbanc charactristics - Limits and mthods of masurmnt Radiatd disturbanc: class A Elctrostatic discharg immunity tst (ESD); contact discharg ± 4 kv/air discharg ± 8 kv: prformanc critria B Radiatd, radio-frquncy, lctromagntic fild immunity tst; 80 to 2700 MHz using 10 V/m, 1000 Hz AM: prformanc critria A Elctrical fast transint/burst immunity tst All input and output connctions ± 2 kv using capacitiv clamp: prformanc critria B Immunity to conductd disturbancs, inducd by radio-frquncy filds 0.15 to 80 MHz, 1000 Hz AM; 10 V all inputs, both using clamp: prformanc critria A HBM 10 B n

11 Ordring Information (1) Articl Dscription Ordr No. Isolatd digital vnt adaptr (1) All GEN sris systms ar intndd for xclusiv profssional and industrial us. 230 Volt RMS Isolatd Digital Evnt adaptr. Supports 32 channl to channl isolatd digital vnt inputs. Th inputs can ithr b usd to connct to th GEN sris mainframs supporting th Digital Evnt Timr/Countr connctor or optionally connct to a GN6470 or GN4070 acquisition card. Input connctors and cabl to connct to GEN sris mainfram is includd standard. Connction cabls to dirctly connct to th GN6470 or GN4070 card must b ordrd sparatly. 1-G072-2 Accssoris, to b ordrd sparatly Articl Dscription Ordr No. Isolatd digital vnt adaptr to markr card cabl St of 2 cabls to connct th digital markr A and digital markr B output connctors of th G072 isolatd digital vnt adaptr to ithr a GN6470 or GN4070 markr card. Cabl lngth 1.5 m (4.92 ft) 1-KAB Hottingr Baldwin Msstchnik GmbH. All rights rsrvd. All dtails dscrib our products in gnral form only. Thy ar not to b undrstood as xprss warranty and do not constitut any liability whatsovr. Hottingr Baldwin Msstchnik GmbH Im Tifn S Darmstadt Grmany Tl Fax: info@hbm.com masur and prdict with confidnc B n