Insignia - Icon SPARE PARTS CATALOG LASER MARKING SYSTEMS
|
|
- Laura Parrish
- 6 years ago
- Views:
Transcription
1 Insignia - Icon LASER MARKING SYSTEMS To Order Parts Contact: 1(866) / Fax: (407) or Visit Our Website:
2 TABLE OF CONTENTS Insignia - Icon DESCRIPTION PAGE Insignia Control Cabinet (front view) Parts List... 1 Figure Insignia Control Cabinet (rear view) Parts List... 3 Figure Insignia Computer Chassis Parts List... 5 Figure Insignia / Icon Cooling System Parts List... 7 Figure Insignia / Icon Laser Rail Parts List... 9 Figure Insignia / Icon Spares Kits & Test Equipment Spares Kits Arc Lamp Maintenance Kit Optical Cleaning Kit Master Maintenance Kit Control Laser Corporation TOC
3 Insignia Control Cabinet (front view) Parts List / Figure 1-1 Item # Description Part # 1 Keyboard, compact, open frame Drive, floppy, 1.44 meg Disk, CD Rom Power Supply, Switching +/- 28 volt, 4 amp Power Supply, Assembly, +/- 28 volt & 25Vdc Power Supply, Switching, 25 volt, 55 watt F6 / F7 Fuse, 5 x 20mm, T.D., 4amp, 250vac F9 / F10 Fuse, 5 x 20mm, T.D., 3.15amp 250vac F11 / F12 Fuse, 5 x 20mm, T.D., 5amp 250vac F13 /F14 Fuse, 5 x 20mm, T.D., 1.6amp 250vac Slave Card, Fiber Optic, Link A Slave Card, HFP F15 Fuse, 5 x 20mm, T.D.,.5amp 250vac F16 Fuse, 5 x 20mm, T.D.,.5amp 250vac F2 Fuse, 5 x 20mm, T.D.,.5amp 250vac F8 Fuse, 5 x 20mm, T.D.,.5amp 250vac F4 / F5 Fuse, 5 x 20mm, T.D., 10amp 250vac F1 / F3 Fuse, 5 x 20mm, T.D., 1.6amp 250vac Fan 208 / 240vac, 119cfm, 4.68 square Power Distribution, PCB Assembly LED, 6 Chip, 14vac (lens cap, amber ) Position Key Switch Position Shutter Sw Contact Block, E-Stop A Actuator Block, E-Stop
4 Insignia Control Cabinet (front view) Figure 1-1 2
5 Insignia Control Cabinet (rear view) Parts List / Figure 1-2 Item # Description Part # 1 Dual Computer Assy., Fiber Optic (single=227920) A Dual Computer Assy., HFP (single=234546) RF Driver Assy., 24 Mhz, Fiber Optic A RF Driver Assy., 24 Mhz, HFP Arc Lamp Power Supply 4.5 KW A Arc Lamp Power Supply 6W (green, U.V., D.E. models) Heat Exchanger Assy., Air to water I/O Rack 8- in / 8-out, HFP * I/O Rack Interface Cable, 3 ft * This part is not shown in the image 3
6 Insignia Control Cabinet (rear view) Figure 1-2 4
7 Insignia Computer Chassis Parts List / Figure 1-3 Item # Description Part # 1** Motherboard, Raptor Hard Drive, Multi-Gig, IDE Power Supply, ATX A Power Supply, Micro ITX, (Raptor Models) Host Card, Fiber Optic A Host Card, HFP HFP, I/O, Expansion ** Includes processor, Heatsink / Fan, 512MB Ram. Only available for systems currently using Raptor Motherboard 5
8 Insignia Computer Chassis Figure 1-3 6
9 Insignia / Icon Cooling System Parts List / Figure 1-4 Item # Description Part # 1 Cartridge, DI, 3/8 Hose Nipple DI / Temperature Sensor Assembly Switch, 2 position, level Switch, Flow, 3 GPM Pump, water, 1 H.P., 1-PH Solenoid Valve, 2 way, 24 VDC, NC Solenoid Valve, 2 way, 24 VAC. NC Heat Exchanger, Stainless Steel, water to water
10 Insignia / Icon Cooling System Figure 1-4 8
11 Insignia / Icon Laser Rail Parts List / Figure 1-5 Item # Description Part # 1 Flow Tube, Lamp Arc Lamp, Krypton, 79mm Ceramic Reflector, Top O-Ring, Cavity Dual Servo PCB (retrofit kit) NI-DSRK 6 Galvo Motor, 6870 (x) Mirror, MTD 18mm X-Axis (6870 motor only) A Mirror, MTD 18mm X-Axis (6240 motor only) Galvo Motor, 6870 (Y) Mirror, MTD 18mm Y-Axis (6870 motor only) A Mirror, MTD 18mm Y-Axis (6240 motor only) Laser Diode Alignment Kit Servo Interface PCB Assy. (fiber optic systems) A Slave Link I PCB Assy. (fiber optic systems) Flat Field Lens A 6 Flat Field Lens Protective Window 12 / 6 Lens Laser Module Assy.,.50z * 6240 X / Y Scan Kit (HFP models only) * This part is not shown in the image 9
12 Insignia / Icon Laser Rail Figure
13 Level I Spares Kit PN: Spares Kit includes the following: PN Description Qty Cartridge, DI 3/8 hose nip LED, 6-chip 585 nm T-1-3/4 14VAC Lamp Flow Tube Lamp, CW, Krypton - 79mm Arc Fuse, 5x20MM T.D., 1.6AMP 250VAC Fuse, 5x20MM T.D., 0.5AMP 250VAC Fuse, 5x20MM T.D., 3.15AMP 250VAC Fuse, 5x20MM T.D., 10AMP 250VAC Fuse, 5x20MM T.D., 4AMP 250VAC Strainer, Suction Amp Console Fuses 2 Level III Spares Kit PN: Spares Kit includes the following: PN Description Qty RF Driver Assy. (Fiber Optic) Laser Module Assy Water Cooler Assy Power Distribution Assy. (Fiber & HFP) 1 11
14 Arc Lamp Maintenance Kit A Complete Kit with the essentials to maintain and protect your lamp-pump laser investment. Designed and tested to ensure the best performance and longevity from your Krypton Arc Lamp. Guaranteed to increase lamp life and protect your laser system from costly lamp explosions! HIGHLIGHTS A complete set of DI water test and measurement devices in one convenient kit including: High flow T-Strainer assembly with clear polypropylene bowl, stainless steel mesh, integrated pressure test point and temperature indicator strip. Digital rate / flow meter with LCD readout GPM / 150 psig. PVC Housing. Powered by lithium batteries for approx 9,000 hours of operation. "Dip-Style" Water conductivity tester w/ easy to read digital display. 0 to 200.0, 0 to 2000 μs; 0 to ms. Valox housing and stainless steel electrodes for good chemical compatibility. Built in water temperature indicator. Pressure measuring device. Hose Clamps w/ 1/2" barb fittings. BENEFITS Lack of water flow and high water temperatures are key contributors in lamp degradation and lamp failure. These conditions can cause high voltage arc lamps to fail prematurely resulting in harmful glass particles being pulled into the laser cooling system. This kit comes with everything you need to measure the critical aspects in maintaining laser arc lamp performance and protecting the laser system from harmful lamp explosions. Additionally, the Laser Arc Lamp Maintenance Kit comes with all the tools needed to measure water purity, which is also a key component in ensuring lamp ignition and proper laser performance. Easy to read displays allow for quick and accurate readings of flow and temperature while the stainless steel particle filter captures any harmful particles without causing any water flow restrictions. 12
15 Optical Cleaning Kit A Complete Kit filled with the essentials for Laser Optic and General Lens cleaning and maintenance to ensure the best performance from your optical components. HIGHLIGHTS A complete set of supplies in one convenient cleaning kit including: Specially formulated Laser Optic Cleaning Solution, which will not harm optical coatings or leave any residue. 100 Optical Cleaning Swabs 30 Latex anti-static finger cots 5 Booklets of lint-free Lens Cleaning Tissue Optical Blower Bulb Bausch & Lomb 10x Inspection Loupe APPLICATIONS Ideal solution to clean and maintain optical components in pristine condition. For use on a variety of laser optics, lenses, mirrors, and optical instruments. KEY FEATURES Scientifically formulated cleaning agent specifically designed for optics, lenses, and optical instruments. Cleans without trace residues. Removes all common contaminants. Will not harm standard optical coatings. 13
16 Master Maintenance Kit Improve your laser s performance, reliability, and reduce down time. Keep your laser running at peak efficiency with Control Laser s full range of analytic and diagnostic equipment. The Master Maintenance Kit has all the diagnostic tools needed to analyze problems and increase the effectiveness of your preventative maintenance program. Keep your laser running like new with the Master Maintenance Kit. Guaranteed to lower operating / maintenance costs by maintaining the laser s peak performance. KIT CONTAINS RF Meter w/ Female BNC Connector 100-Watt Power Detector w/ Heat Sink & 3 Coax Cable Digital Flow Meter Infrared Hand Viewer 60-Watt Dummy Load w/ Coax Connector One Pair Laser Safety Glasses Water Conductivity Kit Aluminum carrying case with Custom Foam inserts 14
17 Founded in 1967, Control Laser Corporation (CLC) has been providing the most effective laser marking and micromachining systems to industries worldwide for over 40 years. What sets us apart from our competitors is our dedication to quality and our long-term relationship to our customers. We offer the largest selection of wavelength lasers and system solutions on the market today. Control Laser also provides customized fully automated systems designed around your specific needs and application. We re prepared to dedicate our resources, engineers, and qualified technicians to ensure top quality production and material processing results. 15
18 To Order Parts Contact: 1(866) / Fax: (407) or Visit Our Website: Control Laser Corporation 2419 Lake Orange Drive, Orlando, FL Main Line: (407) / Main Fax: (407) Copyright, Control Laser Corporation, All Rights Reserved.
Computer Maintenance. PC Disassembly and Reassembly. Copyright Texas Education Agency, All rights reserved.
Computer Maintenance PC Disassembly and Reassembly 1 Enabling Objectives Computer Chassis (Cases) Power Supplies Configuring the Motherboard Configuring the Connectors CPU Interfaces RAM Installing a Hard
More informationLASER PLUS OPERATING INSTRUCTIONS
LASER PLUS OPERATING INSTRUCTIONS Phone: (209) 586-1022 (800) 545-1022 Fax: (209) 586-1026 E-Mail: salessupport@olsontech.com 025-370403 REV X9 www.olsontech.com 12/16/03 TABLE OF CONTENTS SYSTEM OVERVIEW
More informationSource Four Zoom 15-30
24 21 27 18 15 SPECIFICATIONS PHSICAL Rugged die cast and extruded aluminum construction Patented one-handed focus mechanism with positive lock Rotating shutter assembly ±25 20 gauge stainless steel shutters
More informationBAGGER V2 PX3 PARTS CATALOG
FOAM TECHNOLOGY Smart BAGGER V2 PX3 PARTS CATALOG VER. 20121107 FIP1001 HEATED JAW TEFLON TAPE 3/8" 5965 FIP1002 CRIMPED CROSS CUT ASSEMBLY FIP1003 CRIMPED CROSS SEAL ASSEMBLY FIP1005 EDGE SEAL ARBOR 2005
More informationKNC Model 3719 Air Data Test Set
KNC Model 3719 Air Data Test Set Product Description The Model 3719 Air Data Test Set by King Nutronics Corporation is a highly accurate microprocessor-driven pressure calibrator designed to provide regulated
More informationLIMO Line Laser System - PEX High Power Diode Laser System for Industrial Applications
General Description: Flat Panel Display The laser system is engineered to generate a homogeneous line of 80 mm x 0.2 mm. Componets: - 9x Laser modules - 9x Fibres - Beam Shaping Module - High power laser
More informationDC - Devices and Controller
123 DC - Devices and Controller 1 DC-0010 Diode laser controller MK1-HP The diode laser module is connected via the 15 pin HD SubD jacket at the rear of the controller. The controller reads the EEPROM
More informationIT Essentials v5.0: Introduction to the Personal Computer Online Study Questions Chapter 1
Name: Per.: IT Essentials v5.0: Introduction to the Personal Computer Online Study Questions Chapter 1 Curr Question Answer 1.0.1 1. How large were the first computers? The OS 2. What makes up a computer?
More informationInstallation Site Survey Walchem Web-Based Controllers April 27, 2004
Installation Site Survey Walchem Web-Based Controllers April 27, 2004 General Installation Checklist Select a location for the controller(s) to be installed. The following criteria must be met: Vibration
More informationFront Load Dual Sensor
INFICON Front Load Dual crystal sensors offer proven reliability and durability and have the best thermal stability of any sensor head on the market. The dual sensor provides a backup crystal and is essential
More informationAppendix E: Edge Ti. Overview. Appendix E: Edge Ti 169
Appendix E: Edge Ti 169 Appendix E: Edge Ti Overview The Edge Ti shape cutting control is an extremely versatile product offering up to four configurable axes of motion, built-in Servo Amplifiers and configurable
More informationSpecification and Design Catalog. Waterside Economizer
Specification and Design Catalog Waterside Economizer Table of Contents Waterside Economizer Applications.................................................... 4 Application Notes..................................................................
More informationSPARE PARTS LIST CP COMPRESSOR. Model CPD CPD 75
SPARE PARTS LIST CP COMPRESSOR Model CPD 75-00 EN 05 0 5 CPD 75 CONTENTS Title Page MAINTENANCE HOW TO READ THIS SPARE PART LIST? MAINTENANCE KITS STANDARD UNITS MOTOR-COMPRESSOR UNIT -7 AIR CIRCUIT -9
More informationConductivity Transmitters
Conductivity Transmitters CDTX-90 Series Starts at $ 576 Electronics Only Display in µs, ms, kω, MΩ, ppm (TDS) Simulate Function Programmable Temperature Compensation Relay Options Dual Output Option Allows
More informationLMF Fiber Marker Facility Requirements Effected Models: LMF1000, LMF2000(-HP), ML-7311B/C, ML-7321B/C, ML-7320B/C
Purpose: LMF Fiber Marker Facility Requirements Effected Models: LMF1000, LMF2000(-HP), ML-7311B/C, ML-7321B/C, ML-7320B/C The purpose of this document is to describe the facility requirements for proper
More informationETC. Source Four Zoom Ellipsoidal Series. Source Four Zoom. Connector Designation
Source Four Zoom 25-50 50 45 38 30 S p e c i f i c a t i o n s PHSICAL Rugged, die cast and extruded aluminium construction Patented one-handed focus mechanism with positive lock Rotating shutter assembly
More informationLAKEWOOD INSTRUMENTS MODEL 1575e WATER TREATMENT CONTROLLER
LAKEWOOD INSTRUMENTS MODEL 1575e WATER TREATMENT CONTROLLER The Model 1575e uses the latest in microprocessor capability, giving the user a high level of application flexibility. A large illuminated graphics
More informationMaster Spare Parts List
Part # Master Spare Parts List Title Units Lead Time (weeks) Minimum Order Qty. System Image 30-20AB-0051 Grating Tilt Adjust Full Assembly each 2 1 30-20AB-0060 Sample Support, Adjustable Titanium Arms,
More informationE-series/E1015 Laser Marking Systems
SYSTEM OVERVIEW The Telesis E-series lasers are advanced diode-pumped solid state (DPSS) laser marking systems. The E-series design features a Q-switched end-pumped laser with a remote fibercoupled diode
More informationLW50A Series Facility Requirements
LW50A Series Facility Requirements Effected Models: LW50A(C)(E), LW70A(C)(E) and LW150A(E) ML-2351A(F)(-CE), ML-2350A(F)(-CE), ML-2450A(-CE) Purpose The purpose of this document is to describe the facility
More informationCHAPTER 20 PARTS. This chapter describes assemblies, subassemblies, and parts considered replaceable at on site field installations.
CHAPTER 0 PARTS GENERAL This chapter describes assemblies, subassemblies, and parts considered replaceable at on site field installations. Serial number location is in the back upper left hand corner of
More informationE-series/E1140 Laser Marking Systems
E-series/E1140 Laser Marking Systems General Arrangements SYSTEM OVERVIEW The Telesis E-series lasers are advanced diode-pumped solid state (DPSS) laser marking systems. The E-series design features a
More informationBlower Purge Air Dryers
Blower Purge Air Dryers PB-250 to PB-750 Parts List November 2013 2 Table of contents 1 PB - 250... 4 2 PB - 325... 6 3 PB - 400... 8 4 PB - 500... 10 5 PB - 650... 12 6 PB - 750... 14 7 Control Panel...
More informationThe Eye Com 7000 Dual Page Reader Operating and Maintenance Instructions
A MEDIA INDEPENDENT DOCUMENT MANAGEMENT COMPANY EYE COMMUNICATION SYSTEMS, INC. 455 E. Industrial Drive P.O. Box 620 Hartland, WI 53029 USA (262) 367-1360 or (800) 558-2153 Fax: (262) 367-1362 www.eyecom.com
More information1993 Specifications CSJ SPECIAL SPECIFICATION ITEM Transportation Management Console
1993 Specifications CSJ 0598-01-057 1.0 Description SPECIAL SPECIFICATION ITEM 6398 Transportation Management Console This Item shall govern for the furnishing and installation of Transportation Management
More informationRTK3 Logic Controller User Manual Revised
RTK3 Logic Controller User Manual Revised 6-24-08 1 of 16 svn://software/hardware/rtk3/docs/rtk3_man.doc MRR 6/24/08 9:03 AM Overview The RTK3 is intended to simplify and expedite control wiring. Centroid
More informationSource Four 150W HID Zoom 25-50
S P E C I F I C A T I O N S PHSICAL oke mounted electronic ballast Rugged, die cast and extruded aluminum construction Patented one-handed focus mechanism with positive lock Rotating shutter assembly ±25
More informationFront Load Single Sensor
INFICON Front Load Single crystal sensors offer proven reliability and durability and have the best thermal stability of any sensor head on the market. The front load design allows for easy insertion of
More informationDaikin McQuay. Incremental Comfort System. PKEI, PKES, PKHS 007, 009, 012, 014 Design 2. Replacement Parts List No Revision G 12/2013
Replacement Parts List No. 700017400 Revision G 12/2013 Daikin McQuay Incremental Comfort System PKEI, PKES, PKHS 007, 009, 012, 014 Design 2 To find your Daikin Applied parts distributor, call 1-800-377-2787
More informationRTK4 Logic Controller User Manual For RTK4L Revision Revised
RTK4 Logic Controller User Manual For RTK4L Revision 120326 Revised 6-20-12 RTK4 Features Application: PLC and Third Party Drive Interface Number of Axis Drive Interfaces: 5 Axis DAC Resolution: 16 bits
More informationRemoval and Installation8
8 Screw Types 8-4 Top Cover Assembly 8-5 Left Hand Cover 8-6 Right Hand Cover 8-10 Front Panel Assembly 8-14 Left Rear Cover 8-15 Right Rear Cover 8-16 Extension Cover (60" Model only) 8-17 Media Lever
More informationDishmachine Division Please call for pricing or
Dishmachine Division Please call for pricing -00-- or -00-5- ELECTRICAL BOX Page 0 and PLUMBING Page WRAPPER Page - PAN Page -5 STAND Page and KLE--HL Convertible Dishwashing Machine Part No. 05 5 5 0
More informationSystem Overview. Liquid Cooling for Data Centers. Negative Pressure Cooling Without Risk of Leaks
Liquid Cooling for Data Centers System Overview The Chilldyne Cool-Flo System is a direct-to-chip liquid cooling system that delivers coolant under negative pressure. Chilldyne s technologies were designed
More informationTypical System Construction Schedule; Balzers Chambers: BAK600 BAK760 QLC800
Typical System Construction Schedule; Balzers Chambers: BAK600 BAK760 QLC800 Chamber / Framework System fully dismantled. Old controls and instruments removed. Chamber and framework stripped and prepared
More informationLaserTower DESKTOP LASER MARKING AND ENGRAVING SYSTEM
Industries Defense Government Aerospace Automotive Metal Fabrication Direct Parts Marking Medical & Many More! GS-21F-0041T The is designed to support low-profile, flat marking applications. This type
More informationC5 Series Stainless Steel Photoelectric
C5 Series Stainless Steel Photoelectric Part Number Sensing Range M5 (5 mm) stainless steel - DC 14 models available Diffuse and through-beam styles Long operating distances Compact stainless steel housing
More informationCecil Dissolution 4/9/06 4:51 pm Page 1 DISSOLUTION SYSTEMS
DISSOLUTION SYSTEMS CE 3790 Dissolution Tester Cecil Instruments offer complete dissolution systems as well as all the components of the system individually. The dissolution tester is common to the systems
More informationLaserTowerPRO CM 3D MARKING AND ENGRAVING SYSTEM. LaserTower COMPACT 3D LASER MARKING SYSTEM. LaserTower COMPACT 3D LASER MARKING SYSTEM
LaserTowerPRO CM 3D MARKING AND ENGRAVING SYSTEM Industries Defense Government Aerospace Automotive Metal Fabrication Direct Parts Marking Medical & Many More! GS-21F-0041T The is a lower cost, low system
More informationVector Drive - Troubleshooting Guide
Haas Technical Documentation Vector Drive - Troubleshooting Guide Scan code to get the latest version of this document Translation Available The Haas Vector drive is the source of power for the spindle
More informationWorking Copy For Review Purposes Only!
Working Copy For Review Purposes Only! Version #1.5 08/29/06 Aaron Holland Up-dated D.Turnbull 10-18-2006 (MarkerSOP3.doc) Up-dated D. Turnbull 12-11-06 (MarkerSOP4.doc) Up-dated D.Turnbull 05-12-2008
More informationHD160XT Plus. English version
English version www.zalman.co.kr www.zalmanusa.com Introduction Congratulations on your purchase of Zalman s HD160XT Plus Home Theatre PC Enclosure! You are now about to experience Zalman s world of silent
More informationGX7300 SERIES CHASSIS AND CONTROLLERS 20 SLOT, 3U PXI CHASSIS DESCRIPTION FEATURES CONFIGURATION
20 SLOT, 3U PXI CHASSIS 20 slots supporting a 3U (embedded or remote) PXI controller and 19 3U PXI or ccpi instruments Built-in peripherals (hard disk drive, and a DVD-RW drive) for embedded controller
More informationFiber Laser Scan Kit Quick Start Guide
Fiber Laser Scan Kit Quick Start Guide www.nutfieldtech.com 91-0040 Rev. 1 Safety Precautions Nutfield Technology products are designed and sold as Class IV devices for maximum flexibilty and ease of use.
More informationBGA IRDA-WELDER User Manual. Model: T870A
BGA IRDA-WELDER Model: T870A 0 CATALOGUE Features....2 Technical Parameter and Components..3 T-870A illustrated explaining...4 (1)The whole machine 4 (2)Front panel.. 5 (3)Rear panel.. 5 (4)Focus holder
More informationLASER MARKING. New AREX 30W. AREX 30W Product Announcement 1/14
LASER MARKING New AREX 30W AREX 30W Product Announcement 1/14 Datalogic Industrial Automation Laser Marking has the pleasure to announce the new AREX 30W, new entry on AREX family Fiber Laser markers.
More information200 mm Semi-automated Probe System with BlueRay Technology
PA200BlueRay 200 mm Semi-automated Probe System with BlueRay Technology DATA SHEET The sets a new standard for high-speed accuracy. Its precision ensures smooth probe landing with safe, repeatable electrical
More informationSatisfaction guaranteed by 90 days money back guarantee.
Wave 2018 Special Sale. Wave s exclusive distributor in Europe for 20 years Please contact daniel.grau@teltec.com to request quote. Page 1 of 5 01-003120 Tandberg Tape Drive 1 x x x 01-003641 TP CPU Power
More informationMICROFUSION FEATURES OPTIONS CERTIFICATIONS (PENDING) THREE PHASE SCR POWER CONTROLLERS
MICROFUSION THREE PHASE SCR POWER CONTROLLERS FEATURES Auto-Ranging Input Voltage 24-600 VAC, 45-65 Hz AC Output 16, 32, 50, 80 Amps (@ 50 C 6000 ft) Control Features Microprocessor-based controller /
More informationJ.BAUER Electronics. LaserBee I (T3D-T3N) 1 Watt HOBBYIST LASER POWER METER
J.BAUER Electronics (01/09) LaserBee I (T3D-T3N) 1 Watt HOBBYIST LASER POWER METER The LaserBee I 1 Watt (1000mW) Laser Power Meter was designed to enable the hobbyist technician to test higher power lasers
More informationA Axis M-Functions Level 1 A Axis Standard A Axis SMT Level 2. Each console includes the following:
Hardware List The 3000M Crusader II Upgrade system has been custom configured to provide the necessary hardware required for installation on your machine. Verify that you have received all the correct
More informationLinkam Scientific Instruments
THMS350V Vacuum System The THMS350V stage enables the user to create low pressure environment during complex heating and cooling profiles. Pressure is measured directly on the sample chamber and displayed
More informationMTD75 Comprehensive cooling tower controller with all the functions required for dosing and control of cooling water
MTD75 Comprehensive cooling tower controller with all the functions required for dosing and control of cooling water Features Real time clock for accurate timed dosing Water meter input for volumetric/proportional
More informationItem 620A Multi-Way Sanitary Ball Valve
R Item 0A Multi-Way Sanitary Ball Valve 00 WOG/ PN : /"-" SPECIFICATION * Body & end caps quality investment casting * Regulation (EC) No. / 00; (EU) 0/0 * Available in stainless steel or carbon steel
More informationApplications of Programmable Logic Controllers DG31 34
Applications of Programmable Logic Controllers DG31 34 Purpose Unit purpose: This Unit is designed to introduce candidates to Programmable Logic Controllers (PLCs) and enable them to understand how PLCs
More informationEV15 Laser Marking System
EV15 Laser Marking System General Arrangement SYSTEM OVERVIEW The Telesis EV15 is an advanced, fiber-coupled diode pumped solid state (DPSS) laser marking system. The laser beam and Q-switched pulse characteristics
More informationMPBS1 12V DC-DC Power Supply Rev B
MPBS1 12V DC-DC Power Supply Rev B Features Small and Compact Form Factor High Efficiency Low Input Voltage:< 8 Volts Compatible with Low Power ATX Motherboards Soft Power On (PS_ON) Power Good (PS_OK)
More informationOperational Manual Spectrophotometer Model: SP-830 PLUS Metertech Inc.
Operational Manual Spectrophotometer Model: SP-830 PLUS Metertech Inc. Version 1.06 Metertech Inc. provides this publication as is without warranty of any kind, either express or implied, including, but
More informationCI-100 and CI-170 Parts Catalog. Document
CI-100 and CI-170 Parts Catalog Industrial Dynamics Company, Ltd. Copyright 2011. All rights reserved. No part of this publication may be reproduced or used in any form or by any means (graphic, electronic,
More informationSpare parts list PT-M, PT-L, PT-XL Contents
Spare parts list PT-M, PT-L, PT-XL Contents Water inlet, Tank heating... 3 Water softener... 5 Filter system, Pump pot... 7 Circulating pump (PT-M)... 9 Circulating pump (PT-L, PT-XL)... 11 Lower wash
More informationFQ2H-series/F16I/F16IE/F16SP Laser Marking Systems
F-series/F16I/F16IE/ F16SP Laser Marking System General Arrangement SYSTEM OVERVIEW The Telesis F-series lasers are a family of maintenance-free, Q-switched, Ytterbium fiber lasers designed for marking
More informationWORLD LEADING PRODUCTS FOR LASER SCIENTISTS AND ENGINEERS
High Voltage Laser Diode Driver with up to 48 Volts, 15 Amps for Series Connected Devices Up to 48 Volts, 15 Amps (CW) Designed for Multi-Chip and Series Connected Laser Diodes Requiring High Voltage Compact
More informationMachine Vision Lyte-MV
Machine Vision Lyte-MV premier & acculase modulatable/machine vision lyte-mv/dragonfly green/ imatronic/laserlyte/laserlyte-flex/guideline/hawkeye detector/ firefly green/firefly green mini/thread mountable
More informationSputtering Sensor ADVANTAGES
The INFICON is specifically designed for use in any sputtering process. The sensor body and cooling tubes are gold plated beryllium copper for maximum cooling efficiency in the sputtering environment.
More informationPenetration - Bitumen Method - PNR 12 (automatic)
Penetration - Bitumen Method - PNR 12 (automatic) Standards depend on the selected accessories ASTM D 5, DIN 52010 (obs.), EN 1426, EN 13179-2, EN 13880-2, JIS K2207, AASHTO T49 Product group(s): Bitumen,
More informationClamp-On Digital Multimeters
Clamp-On Digital Multimeters GS-Mark EN61010-1 Approval Voltage Category III 600 V, Pollution Degree II AC/DC Current Clamp Highly Accurate 1999, 2500, 3999, 4300 Counts Resolution MAX, Data Hold, PEAK,
More informationUser Manual. JS-ICON 624 PACK Portable Dimmer Pack. JOHNSON SYSTEMS INC. Spring
User Manual JS-ICON 624 PACK Portable Dimmer Pack JOHNSON SYSTEMS INC. Spring 2007 Table of Contents JS-ICON 624 DMX JS-ICON 624 CC 6-2.4kW Dimming Strip JS-ICON 624 ND 6-2.4kW Relay Strip Introduction...3
More informationWeb: Tel: (02) Fax: (02)
100mm 27W LED Work Light High quality. Advanced cooling sink in long lifespan. Great for a number of different vehicles and situations. 96-6271D 27 Watt (9*3W) Epistar LED 2150 Lumen 60 Flood, 30 Spot
More informationMB280 / MB290 SERVICE MANUAL
MB280 / MB290 TABLE OF CONTENTS 1. DETAILED SECTION DESCRIPTIONS...1-1 1.1 COMPONENT LAYOUT... 1-1 1.1.1 MECHANICAL COMPONENTS... 1-1 1.2 PRINTING... 1-2 1.2.1 PRINTING PROCESSES AROUND THE DRUM... 1-2
More informationIL-885 Inline Cabinets
IL- Inline Cabinets Section F: Table of Contents Cabinet Models Options Parts Electrical Options Cabinet Assembly Electrical panels Blow-Off Assembly Reclaimers Dust Collectors Blowers (Fans & Motors)
More informationOperating Instruction for IQ Series laser diode module Instructions for IQ1C, IQ2C, IQ4C, IQ6, IQ7, IQ1A, IQ2A, IQ4A, IQ1H, IQ2H and IQ4H
OI_new IQ Series_noµproc.docx September 2013 Page 1 of 7 Operating Instruction for IQ Series laser diode module Instructions for IQ1C, IQ2C, IQ4C, IQ6, IQ7, IQ1A, IQ2A, IQ4A, IQ1H, IQ2H and IQ4H The latest
More informationK10 Intrinsically Safe Electro-Pneumatic Positioner Operating Manual
K0 Intrinsically Safe Electro-Pneumatic Positioner Operating Manual Pneumatic Connection Single Acting Actuator (Spring Return): For single acting actuators Outlet Port 2 is to be plugged. Outlet Port
More informationThermal OEM Laser Heads
Thermal OEM Laser Heads OEM laser sensor Disks and laser heads manufactured by LaserPoint are based on high sensitivity thermopiles. They are made with resistant materials and coatings that extend their
More information2 SURE-LAUNCH gas launcher shown with REL s microcontroller. User-friendly remote gives operator mobility.
/////////////////////////////////// ////////////////////////////////// 2 SURE-LAUNCH gas launcher shown with REL s microcontroller. User-friendly remote gives operator mobility. //////////////////////////////////
More informationBlue Point Engineering
Blue Point Engineering SV203 Interface Overview Overview Sensors Light Sensor Motion Sensor Joystick Computer USB PORT Technical Pointing the Way to Solutions! T http://www.bpesolutions.com Animatronic
More informationWBS Readout Infrastructure
WBS 2.6.3 Readout Infrastructure Craig Dukes University of Virginia Bill Gilbert University of Minnesota CD2/3a DOE Review of NOυA October 23-25, 2007 Organization 1. Power Distribution System (PDS) (Dukes)
More informationINSTRUCTION MANUAL HIGH CURRENT DRIVER BOARD STAND ALONE
Instruction Manual High Current Driver Board Stand Alone 1 INSTRUCTION MANUAL HIGH CURRENT DRIVER BOARD STAND ALONE Models: 1 AMP: HCDBSA1_0AMP 1.5 AMP: HCDBSA1_5AMP 2.0 AMP: HCDBSA2_0AMP 2.5 AMP: HCDBSA2_5AMP
More informationMC-1 OPERATION MANUAL MINI CAMERA JW FISHERS MFG INC 1953 COUNTY ST. E. TAUNTON, MA USA
MC-1 MINI CAMERA OPERATION MANUAL JW FISHERS MFG INC 1953 COUNTY ST. E. TAUNTON, MA 02718 USA (508) 822-7330; (800) 822-4744; FAX (508) 880-8949 Email: info@jwfishers.com WEB: www.jwfishers.com SPECIFICATIONS
More informationModel QRS CPVS
SPARE PARTS LIST EN CP COMPRESSOR Model QRS 0-5 - 0 CPVS 0-5 - 0 6 05 50 65 KEY - Door Panel: 655900 Lock - Door Panel: 005076 QRS 0 CONTENTS Title Page MAINTENANCE HOW TO READ THIS SPARE PART LIST? KIT
More informationOTEB-CO-B Series. Booster EDFA OPERATING MANUAL
OTEB-CO-B Series Booster EDFA OPERATING MANUAL 24926 Highway 108 Sierra Village, CA 95346 Phone: (800) 545-1022 Fax: (209 586-1022 025-000533 Rev X6 E-Mail: sales@olsontech.com 27 Apr 2010 TABLE OF CONTENTS
More informationConnectorized Aspheric Fiber Optic Collimators
Connectorized Aspheric Fiber Optic Collimators Diffraction limited performance Rugged stainless steel housing Pre-aligned for popular wavelengths Connectorized for quick assembly Threaded exterior for
More informationLaser Diode Collimators Type 48TE, 48-0, and 44TE, universal modular system for self-assembly
Laser Diode Collimators Type 48TE, 48-0, and 44TE, universal modular system for self-assembly Laser Diode Collimators 48TE, 48-0, and 44TE, Laser Diode Base Unit 44TE LD Collimators Types 48TE, 48-0 and
More informationVector Drive - Troubleshooting Guide
Haas Technical Documentation Vector Drive - Troubleshooting Guide Scan code to get the latest version of this document Translation Available The Haas Vector drive is the source of power for the spindle
More informationETC. Source Four jr Zoom. Ellipsoidal Series. Source Four jr Zoom. Connector Designation
S P E C I F I C A T I O N s PHYSICAL Rugged die cast aluminum construction 20 gauge stainless steel shutters in a bi-plane assembly High impact, thermally insulated knobs and shutter handles Two accessory
More informationFront Load Single Sensor
INFICON Front Load Single crystal sensors offer proven reliability and durability and have the best thermal stability of any sensor head on the market. The front load design allows for easy insertion of
More informationVector Drive - Troubleshooting Guide
Haas Technical Documentation Vector Drive - Troubleshooting Guide Scan code to get the latest version of this document Translation Available The Haas Vector drive is the source of power for the spindle
More informationDC3IOB Revision User Guide Updated 7/12/12. Overview
DC3IOB Revision 080910 User Guide Updated 7/12/12 Overview The DC3IOB is a three axis DC brush motor drive with an integrated PLC. A range of motor drive currents are selectable with jumper blocks. The
More informationHoneywell Model 700/800 Signal Processor and Viewing Head
Honeywell Model 700/800 Signal Processor and Viewing Head USER MANUAL Model 700ACSP Universal 85-265 VAC powered, plus 24VDC backup. Model 700DCSP 22-26VDC powered, plus 24VDC backup. The two Model 700
More informationFast Cloud Droplet Probe Technical Manual Rev. 1.0
3022 Sterling Circle Suite 200, Boulder, CO 80301. (303) 449-1105 (303) 449-0132(fax) www.specinc.com Fast Cloud Droplet Probe Technical Manual Rev. 1.0 PRELIMINARY Table of Contents 1.0 FCDP General Description...
More information20W Tungsten-Halogen Light Source. Operation Manual
20W Tungsten-Halogen Light Source - ASB-W-020 - Operation Manual Important Safety Notices 1. Never look directly into the light beam, including through the cooling fan while light is on, as this can cause
More informationMICRO BURN IN PRODUCTS LISTED IN MODEL NUMBER ORDER FOLLOWED BY A BRIEF DESCRIPTION
MICRO BURN IN PRODUCTS LISTED IN MODEL NUMBER ORDER FOLLOWED BY A BRIEF DESCRIPTION MODEL 102P 102R DESCRIPTION Floor Stand (Plane) Floor Stand (Modified) HTRB Burn-In System (diode) Component Burn-In
More informationPrecise temperature control and high reliability
LASER COOLING Precise temperature control and high reliability Heat sinks for actively and passively cooled light sources Thermoelectric recirculating chillers Compressor based recirculating chillers Cabinet
More informationSPECIFICATION FOR BLACK BODY CALIBRATION SOURCE
SPECIFICATION FOR BLACK BODY CALIBRATION SOURCE Source to calibrate Infrared thermometer in the range of 50 C to 1000 C with suitable internal sensor. PID controller and digital display for displaying
More informationHIGH-VOLTAGE. browse our website for complete specifications. Your Source for Low & High Voltage Power Solutions
Formerly known as HiTek Power Corporation HIGH-VOLTAGE POWER SOLUTIONS Your Source for Low & High Voltage Power Solutions www.lhvpower.com browse our website for complete specifications Your source for
More informationHomag Single-Sided Edgebanding Machine, Model KAL 310/4/A20
Homag Single-Sided Edgebanding Machine, Model KAL 310/4/A20 The Homag KAL is a single-sided edgebanding machine for the application of coiled, strip, and solid wood band material. All stations are mounted
More informationSingle and double Row LED Light Bars // LED Auxiliary Lights LED Work Utility Lights // LED Light accessories // LED Mounting Brackets
Single and double Row LED Light Bars // LED Auxiliary Lights LED Work Utility Lights // LED Light accessories // LED Mounting Brackets 2 3 led light bars 09-12212-4c 09-12212-20c» diamond plate LED light
More informationSPECIAL SPECIFICATION 1252 System Control Unit Console
1993 Specifications CSJ 0924-06-147, etc. SPECIAL SPECIFICATION 1252 System Control Unit Console 1. Description. This Item shall govern for the furnishing and installation of system control unit (SCU)
More informationButterfly Laser Diode Mount
LM14S2 Butterfly Laser Diode Mount Operating Manual LM14S2 Laser On TEC Driver LD Driver THORLABS, Inc. Ph: (973) 579-7227 435 Route 206N Fax: (973) 383-8406 Newton, NJ 07860 USA www.thorlabs.com 10614-D02
More informationAndover ContinuumTM Infinet II
Andover ContinuumTM Infinet II i2850 Series The i2850, i2851, and i2853 controllers provide cost-effective DDC control of individual terminal units (e.g. VAV boxes, fan-powered induction units, unit ventilators,
More informationToll Free Phone, (US & Canada): (800) Toll Free Fax, (US & Canada): (800)
Toll Free Phone, (US & Canada): (800) 427-6668 Toll Free Fax, (US & Canada): (800) 361-7745 http://www.garland-group.com HALF SIZE MOISTURE PLUS DESCRIPTION PAGE CONTROL PANEL ASSEMBLY VIEW 4 PARTITION
More informationP recise Eye. High resolution, diffraction-limited f/4.5 optical quality for high precision measurement and inspection.
High resolution, diffraction-limited f/4.5 optical quality for high precision measurement and inspection. Long working distance makes lighting and handling easier. Compact size. Coaxial lighting available
More information