Fiber Laser Scan Kit Quick Start Guide
|
|
- Evangeline Moody
- 5 years ago
- Views:
Transcription
1 Fiber Laser Scan Kit Quick Start Guide Rev. 1
2 Safety Precautions Nutfield Technology products are designed and sold as Class IV devices for maximum flexibilty and ease of use. Such designs require the user to assure the overall safety of the configuration in use. Class I and Class IV devices can be used in a production environment as it is the user s responsibility to ensure that the following is understood: A) before installation or usage of a laser kit, the user must be aware of the regulations on laser safety. ) during maintenance activities of laser systems, safety classes may change. In which case, the user has to take appropriate actions in advance. C) Certifed lasers contain features to assist in their safe usage. These protective features as any of these features within the Nutfield Technology products must not be defeated. One of the best ways to understand laser safety, enclosures an safe implementation guidelines is through companies or organizations like Rockwell Laser Industries, Laser Institute of America, and RT Technologies. The Laser Kit Concept Nutfield Technology kits form a powerful and sophisticated bridge between your laser, target and your computer screen. Each laser scanning kit gives you tremendous flexibility with less cost and effort than any other. Industry standard XY2-100 interface allows you to easily connect to our controller and software or many other third party control platforms. This approach in developing your own laser scanning system or application is a great way to perform laser scanning functions without a large investment in time and expense. What You Can Do With Our Kits Nutfield Technology kits allow you to perform precision laser scanning at a very low price. Here are ways to use this capability... Proof-of-Principle You can use our kit for proof-of-principle work to test new laser scanning schemes. Our kit s flexibility will allow you to test a wide variety of concepts, and you can even change scanners and lenses to provide a new capability at a small incremental cost. What We Provide Nutfield Technology kits are pre-configured, lab-ready laser beam positioning systems that offer optional hardware and optical upgrades. Each kit contains a precision XY scan head, complete with mirrors, servo control electronics, and optics. Kits may be ordered with our Pipeline Controller and WaveRunner Software which will include a control cable for the laser of choice. Kits also contain a mounting platform to align and mount the laser to provide an integrated package. We also provide application engineering backup when required. What You Provide You provide the laser. We have found that most kit users already have a laser preference. Our kits are designed to accommodate a wide range of laser powers within each application platform. You also provide a personal computer. Additionally, you provide safety enclosures and interlocks to ensure safe operation. If you want to move parts through the kit s working field, you must also provide material transport. Prototype Many customers use a kit in a prototype version of a laser scanning system and then buy modules like the XY scan head, Pipeline and software separately for system production. This allows you to develop and demonstrate a sophisticated prototype in a short period of time. New Products Some companies have built parts of kits right into their new product. This shortens the development time and allows a company to devote its limited resources to the more proprietary aspect of its product. Production Although the kit concept was designed for flexibility, some customers are finding that kits fit ideally into dedicated production environments. The scanning performance usually exceeds other approaches and the low cost makes the kit a superior choice. Standardized and optional kit features allow easy duplication of the production line setups. Page 1
3 Power Electrical Connections X-Y Data See Interface Connections Drawing DC Power US Ethernet (Optional) See Interface Connections Drawing Laser Control * 15 V DC Power * Laser Power Supply *Cable part number dependent upon laser selection FIER LASER KIT ELECTRICAL CONNECTIONS DRAWING SIZE SHEET DRAWN Y 1 OF 1 KMK DATE 05/25/16 DRAWING NUMER REV Page 2
4 Mechanical Drawing 2 Axis Scan Head Shutter or Adapter Plate Pipeline 3X M4 Socket Head Cap Screw Lens Ring 4X M3 x 10 mm Socket Head Cap Screw 4X M3 Screw M5 Clamping Screw Lens Collimator Adapter Fiber Collimator Note: Assembly hardware provided as shown Hardware length dependent upon part selection FIER LASER KIT MECHANICAL OUTLINE DRAWING SIZE SHEET DRAWN Y DATE DRAWING NUMER REV 1 OF 1 KMK 05/25/ Page 3
5 Interface Connections Interface Connections Used to Connect to Customer Supplied Equipment Shutter (Optional) Pipeline I/O and Encoder Pin Shutter 1 Solenoid Supply 2 Solenoid RTN 3 Sensor 1 Supply 4 Sensor 1 Out 5 Sensor 1 RTN 6 Empty 7 Sensor 2 Supply 8 Sensor 2 Out 9 Sensor 2 RTN DETAIL A 9 Pin Conn Male Pin I/O 1 OPTO IN 0 2 OPTO IN 1 3 OPTO IN 2 4 OPTO IN 3 5 OPTO IN 4 6 OPTO IN 5 7 O VDC 8 O GND 9 OPTO OUT 0 10 OPTO OUT 1 11 OPTO OUT 3 DETAIL 15 Pin Conn Female DETAIL C 9 Pin Conn Female Pin Encoder 1 A IN- 2 RXD 3 TXD 4 EMPTY 5 GND 6 A IN+ 7 IN V 9 IN- 12 OPTO OUT 4 13 OPTO OUT 5 14 SASTAT OUT 15 SASTOP A C INTERFE CONNECTIONS PIPELINE AND SHUTTER DATE 1 OF 1 KMK 01/08/ SIZE SHEET DRAWN Y DRAWING NUMER REV Page 4
Laser Kit Quick Start Guide
Coherent J-Series CO 2 Laser Kit Quick Start Guide www.nutfieldtech.com 91-0041 Rev. 1 Safety Precautions Nutfield Technology products are designed and sold as Class IV devices for maximum flexibility
More informationOnline data sheet. S30A-7021EK S3000 Anti Collision SAFETY LASER SCANNERS
Online data sheet S30A-7021EK S3000 Anti Collision A B C D E F system plug not supplied with delivery Ordering information Type Part no. S30A-7021EK 1071544 Usage Can only be used in the EFI system network,
More informationAppendix E: Edge Ti. Overview. Appendix E: Edge Ti 169
Appendix E: Edge Ti 169 Appendix E: Edge Ti Overview The Edge Ti shape cutting control is an extremely versatile product offering up to four configurable axes of motion, built-in Servo Amplifiers and configurable
More informationRadiant Dyes Laser Accessories GmbH
13. Custom designed opto-mechanics - For industry and science- You design it We manufacture it Customized mirror mounts: - From 2 inch up to 20 inch diameter - From aluminium to ceramic - From red to black
More informationOnline data sheet. TiM TiM5xx 2D LIDAR SENSORS
Online data sheet TiM571-501 TiM5xx TiM571-501 TiM5xx A B C D E F H I J K L M N O P Q R S T Detailed technical data Features Field of application Light source Ordering information Type Part no. TiM571-501
More informationMLD 500, MLD 300 Multiple Light Beam Safety Devices and transceiver with integrated muting
2 rue René Laennec 51500 Taissy France Fax: 03 26 85 19 08, Tel : 03 26 82 49 29 E-mail:hvssystem@hvssystem.com Site web : www.hvssystem.com MLD 500, MLD 300 Multiple Light Beam Safety Devices and transceiver
More informationMicroHAWK ID-20 / ID-30 / ID-40
MicroHAWK ID-20 / ID-30 / ID-40 Configuration Guide Hardware Required Item Description Part Number MicroHAWK ID-20, MicroHAWK ID-30, or MicroHAWK ID-40 7ABX-YZZZ-LPPP 2, USB A to Micro B, 6 ft., ID-20
More informationIMAGE-BASED CODE READERS
Product description The Lector - tion, compact housing and exchangeable optical design it is well equipped for a variety of needs. It can easily be used for small codes, in high production At a glance
More informationOptional integrated laser alignment facilitates simple, fast alignment for long distances or when using mirrors. Stone production Automotive industry
Technical data overview Operating range 0.5 20 m 15 70 m Number of beams, type dependent 2 8 Beam distance, type dependent 300 mm, 400 mm, 450 mm, 500 mm, 600 mm Type according to EN 61 496 Type 4 Enclosure
More informationMicroscopic Imaging Research Station (MIRS) Assembly Guide. Version 1.0.0
Microscopic Imaging Research Station (MIRS) Assembly Guide www.adsyscontrols.com Adsys Controls, Inc.2012 Version 1.0.0 I. Assembly of the Adsys Controls MIRS system This document explains the assembly
More informationZX1 & ZX2 SERIES. Compact displacement sensing.»» All-in-one housing»» Highly stable measurement of any surface»» Plug & play simple operation
ZX1 & ZX2 SERIES Compact displacement sensing»» All-in-one housing»» Highly stable measurement of any surface»» Plug & play simple operation The highest performance The ZX1 and ZX2 series of displacement
More informationOverview. Features CHAPTER
CHAPTER 2 This chapter provides these topics that describe the Catalyst 2955 switch, hereafter referred to as the switch. Features, page 2-1 Front-Panel Description, page 2-3 Rear-Panel Description, page
More informationPrecision Projection Systems. Laser Components Catalog
Precision Projection Systems Laser Components Catalog 2001 PRECISION PROJECTION SYSTEMS 17508 STUDEBAKER ROAD CERRITOS, CALIFORNIA 90703 562 865-8552 TEL 562 924-7133 FAX email: info@ppsfx.com http://www.ppsfx.com
More informationProcedure to Install an IO Expansion Cage Assembly in a Maxum II Modular Oven Analyzer
Procedure to Install an IO Expansion Cage Assembly in a Maxum II Modular Oven Analyzer Difficulty Level: Medium Estimated time to execute: 1 Hour Revision History Issue Date Reason 001 5/31/2016 Initial
More informationLyte-MV Digital Userguide Red & IR Versions
Product Overview Lyte-MV Digital Userguide Red & IR Versions Thanks for purchasing the Lyte-MV, a laser diode module emitting a uniform (non-gaussian) and welldefined line with a user-adjustable focus.
More informationProduct description. At a glance. performance in a metal housing coating available Precise autocollimation optics. sensors
-2 Laser Small photoelectric sensors High-performance photoelectric sensor family with laser optics Product description At a glance performance in a metal housing coating available Precise autocollimation
More informationLaser Diode Collimators Type 48TE, 48-0, and 44TE, universal modular system for self-assembly
Laser Diode Collimators Type 48TE, 48-0, and 44TE, universal modular system for self-assembly Laser Diode Collimators 48TE, 48-0, and 44TE, Laser Diode Base Unit 44TE LD Collimators Types 48TE, 48-0 and
More informationLyte-MV Analogue Userguide Red & IR Versions
Product Overview Lyte-MV Analogue Userguide Red & IR Versions Thanks for purchasing the Lyte-MV, a laser diode module emitting a uniform (non-gaussian) and welldefined line with a user-adjustable focus.
More informationANC Series RS-422 Serial Communications Adapter
Rev. B $ 5.00 ANC - 6000 Series RS-422 Serial Communications Adapter Antona Corporation, Los Angeles, CA Antona Corporation (818)783-4299 FAX (818)783-4216 1 Antona Corporation Copyright Copyright (c)
More informationTAPR GPS Kit USER S GUIDE
TAPR GPS Kit USER S GUIDE GPS Kit parts derived from the original Synergy Systems, LLC SynPaQ/E M12+ version Shipped as-is without Warranty These GPS Kit parts were previously used in a timing application
More informationLinear Positioning Stage Reference Manual
PP-30 Series Linear Positioning Stage PP-30 Piezo Positioner Stage Rev 3.00 MICRONIX USA, LLC 15375 Barranca Parkway, E-106 Irvine, CA 92618 Tel: 949-480-0538 Fax: 949-480-0538 Email: info@micronixusa.com
More informationAdapter Kit - QSI Electronics to G-Series Meter Installation Instructions
Adapter Kit - QSI Electronics to G-Series Meter Installation Instructions These installation instructions cover the adapter kit installation of the QSI1, QSI2 and QSI3 versions of communications electronics
More informationCDRPan. Installation. Instructions for Planmeca / PM 2002 CC / EC FOR PANORAMIC SYSTEMS
CDRPan FOR PANORAMIC SYSTEMS Installation Instructions for Planmeca / PM 2002 CC / EC Schick Technologies, Inc. 31-00 47 th Avenue Long Island City, New York 11101 (718) 937-5765 (718) 937-5962 (FAX) Part
More informationPMDX-108-Output. 8-Channel Isolated Output Board for PC parallel port pins 2-9. User s Manual
PMDX-108-Output 8-Channel Isolated Output Board for PC parallel port pins 2-9 User s Manual Date: 25 February 2010 PMDX Web: http://www.pmdx.com 9704-D Gunston Cove Rd Phone: +1 (703) 372-2975 Lorton,
More informationCDRPan. Installation. Instructions for Siemens OP-10 FOR PANORAMIC SYSTEMS
CDRPan FOR PANORAMIC SYSTEMS Installation Instructions for Siemens OP-10 Schick Technologies, Inc. 31-00 47 th Avenue Long Island City, New York 11101 (718) 937-5765 (718) 937-5962 (FAX) Part Number B1051106
More informationUNIVERSAL MOTION INTERFACE (UMI) ACCESSORY
USER GUIDE UNIVERSAL MOTION INTERFACE (UMI) ACCESSORY Introduction This user guide describes how to use the UMI-A, UMI-Flex, and UMI-Flex accessories. The UMI products are connectivity accessories you
More informationACCESSORIES FOR SAFETY DEVICES
ACCESSORIES FOR SAFETY DEVICES - SE-DM: series: deviating mirrors - SE-LP: series: laser pointer - SE-S: series: floor stand - SE-SR2 series: safety relay - SE-SRT series: connection box INSTALLATION SE-DM
More informationCDRPan FOR PANORAMIC SYSTEMS
CDRPan FOR PANORAMIC SYSTEMS Installation Instructions for Yoshida/Kaycor Panoura SU-10 Schick Technologies, Inc. 31-00 47 th Avenue Long Island City, New York 11101 (718) 937-5765 (718) 937-5962 (FAX)
More informationVIS - Laser Marking System W
VIS - Laser Marking System 10-20-30-40W System Overview All Automator YAG lasers are manufactured with the highest quality sources available. VIS is a laser unit extremely light and solid, which perfectly
More informationVision HAWK Smart Camera Guide
Vision HAWK Smart Camera Guide 83-016800-02 Rev A Copyright 2011 Microscan Systems, Inc. Tel: 425.226.5700 / 800.251.7711 Fax: 425.226.8250 ISO 9001 Certified Issued by TüV USA All rights reserved. The
More informationGalil Motion Control. EDD 3701x
Galil Motion Control EDD 3701x Datasheet : Digital Drive 1-916-626-0101 Galil Motion Control 270 Technology Way, Rocklin, CA [Type here] [Type here] (US ONLY) 1-800-377-6329 [Type here] Product Description
More informationGH-50. Gimbal Head. You re on steady ground
GH-50 Gimbal Head You re on steady ground 1 INTRODUCTION Thank You for choosing Oben! The Oben GH-50 is a gimbal-type tripod head designed to balance a lens along its vertical and horizontal axes. Ideal
More informationData Sheet. OCR Reader CR 700. vision technology
Data Sheet OCR Reader CR 700 vision technology OCR Reader CR 700 The readers of the CR 700 series are ultra-compact, Ethernet-ready reading systems for fast and secure detection of optical characters (OCR),
More informationACCELERATOR LENS ADAPTER
ACCELERATOR LENS ADAPTER User Manual LAG-MFT-NF Nikon F-Mount to Micro Four Thirds THANK YOU FOR CHOOSING VELLO The Vello Accelerator Lens Adapter is for attaching Nikon F-Mount lenses to Micro Four Thirds
More informationQUICK START GUIDE 2-D Laser Scanner
FACTORY AUTOMATION QUICK START GUIDE 2-D Laser Scanner DE OMD0M-R2000-B2 OMD0M-R2000-B2 OMD2M-R2000-B2 OMD0M-R2000-B2 OMD0M-R2000-B2 OMD2M-R2000-B2 DE With regard to the supply of products, the current
More informationASI Photoport TIRF Injector Instruction Manual
ASI Photoport TIRF Injector Instruction Manual Applied Scientific Instrumentation, Inc. 29391 W. Enid Rd. Eugene, OR 97402-9533 USA Phone: (800) 706-2284 (541) 461-8181 Fax: (541) 461-4018 Web: www.asiimaging.com
More informationEDR-810 Series Quick Installation Guide
EDR-810 Series Quick Installation Guide Moxa Industrial Secure Router Edition 4.0, May 2018 Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: 1-714-528-6777
More informationINGRID. Lens Mount Assembly and Alignment Procedure. Author: Paul Jolley
INGRID Lens Mount Assembly and Alignment Procedure Author: Paul Jolley Revision 0.6 Date 20 th March, 2000 1. Introduction The purpose of this document is to describe the assembly procedure to mount the
More information4100/ VDC Converter Installation Instructions
4100/4120-0156 8 VDC Converter Installation Instructions Introduction This publication describes the installation procedure for the 8 VDC Converter. Related Documentation Field Wiring Diagram for 4100
More informationCSMIO-MPG. 6-axis Manual Pulse Generator (MPG) Module. Rev copyright 2014 CS-Lab s.c.
CSMIO-MPG 6-axis Manual Pulse Generator (MPG) Module Rev. 2.0 copyright 2014 CS-Lab s.c. Index 1. General information...3 1.1 Signs used in this guide... 3 1.2 Standards compliance... 4 1.3 Technical data...
More informationEnclosure TS-530 User Manual
Enclosure TS-530 User Manual 16525 East Laser Drive Fountain Hills, AZ 85268 TEL 480.837.5200 FAX 480.837.5300 info@embeddedx86.com http://www.embeddedx86.com/ Technologic Systems, Inc. COPYRIGHT 1998-200
More informationLASERMET LS-20 INSTRUCTION MANUAL
LASERMET LS-20 INSTRUCTION MANUAL LASER SAFETY SHUTTER 00629-53-000 Issue 2 14 December 2012 Lasermet LS-20 Instruction Manual Contents DECLARATION OF CONFORMITY... 3 Concept... 4 Control Options... 4
More informationThis Datasheet for the IC697CHS790. Rack, 9 Slots, Rear Mount.
This Datasheet for the IC697CHS790 Rack, 9 Slots, Rear Mount. http://www.cimtecautomation.com/parts/p-14771-ic697chs790.aspx Provides the wiring diagrams and installation guidelines for this GE Series
More informationLU9715 Digital Projector Installation Guide
LU9715 Digital Projector Installation Guide English Table of Contents Product information... 3 Packing contents...3 Projector specifications...4 Projector exterior view...4 Terminals...5 Control panel...5
More informationGH-30. Gimbal Head. You re on steady ground
GH-30 Gimbal Head You re on steady ground 1 INTRODUCTION Thank You for choosing Oben! The Oben GH-30 is a gimbal-type tripod head designed to balance a lens along its vertical and horizontal axes. The
More informationOnline data sheet. C4C-EB10530A10000 detec SAFETY LIGHT CURTAINS
Online data sheet C4C-EB10530A10000 detec A B C D E F Ordering information Type Part no. C4C-EB10530A10000 1219563 Included with delivery with every device: 1 system connecting cable with flying leads
More informationUltra Low Noise Laser 1550nm
Ultra Low Noise Laser 1550nm User Manual Version 1.01 Last Updated 07/13/17 www.apichip.com T: 310 642-7975 F: 310 642-7829 Page 1 of 10 Revision Table Revision Description 1.0 Initial release 1.01 Cable
More informationPPS-28. Precision Piezo Stage Reference Manual. S e r i e s. (Open and Closed Loop Versions)
PPS-28 S e r i e s Precision Piezo Stage (Open and Closed Loop Versions) PPS-28 Piezo Positioner Stage Rev 3.02 MICRONIX USA, LLC 15375 Barranca Parkway, E-106 Irvine, CA 92618 Tel: 949-480-0538 Fax: 949-480-0538
More informationMounting. possibilities. Transmitter optics. 8-pole fem. connector Binder Series 712 (PLC) Connecting cable: cab-las8/sps or cab-las8/sps-w
L-LAS Series L-LAS-TB-50 - Laser line sensor, 1 mw, class 2 laser product - Visible laser line (red light 670 nm), 50 mm light curtain - Measuring range typ. 48 mm - Resolution typ. 30 μm - Integrated
More informationRS-232 Driver Module
RS-232 Driver Module Low Cost TTL to RS-232 Adapter DCE (SKU #30000) DTE (SKU #30010) Transmit and receive RS-232 Data Can be mounted on any solderless breadboard, or hard-wired Reconfigurable for DCE
More informationPresence Sensing Safety Devices
Presence Sensing Devices GuardShield POC Type 4 440L Point of Operation Control (POC) for finger or hand protection Heavy-duty IP65 housing Large operating range 0.3 6 m (0.98 52.49 ft) Dip switch selectable
More informationSafeC S. Features. Typical Applications. Technical Data. Principle. Safety Relay
EN 954 SafeC S Safety Relay SafeC S: Narrow construction of only 22.5 mm SafeC S is a sturdy and extremely inexpensive safety relay which impresses with its unusual efficiency and versatility, despite
More informationMotorized Solutions. Hall-Effect solid-state sensor technology integrated into motorized zoom lenses.
Motorized Solutions Hall-Effect solid-state sensor technology integrated into motorized zoom lenses. Hall-Effect sensors are unaffected by ambient light, environmental contamination, and variations in
More informationLASER MARKING. New AREX 30W. AREX 30W Product Announcement 1/14
LASER MARKING New AREX 30W AREX 30W Product Announcement 1/14 Datalogic Industrial Automation Laser Marking has the pleasure to announce the new AREX 30W, new entry on AREX family Fiber Laser markers.
More informationEPILOG LASER Table Mountain Parkway Golden, Colorado Phone FAX
EPILOG LASER 16371 Table Mountain Parkway Golden, Colorado 80403 Phone 303-277-1188 - FAX 303-277-9669 www.epiloglaser.com Procedure Title: Replacing the Optics in your FiberMark Laser Engraver Tools Needed:
More informationF-series/F14A/F14SP Laser Marking Systems
F-series/F14A/F14SP Laser Marking Systems F-series/F14A/ F14SP Laser Marking System General Arrangement SYSTEM OVERVIEW The Telesis F-series lasers are a family of maintenance-free, Q-switched, Ytterbium
More informationXL-80 spares list. Application note. Overview
XL-80 spares list Overview This application note lists the system components for the XL-80 laser system. To order please contact your local Renishaw office at www.renishaw.com/contact Description XL-80
More informationWeb Site: Forums: forums.parallax.com Sales: Technical:
Web Site: www.parallax.com Forums: forums.parallax.com Sales: sales@parallax.com Technical: support@parallax.com Office: (916) 624-8333 Fax: (916) 624-8003 Sales: (888) 512-1024 Tech Support: (888) 997-8267
More informationInstallation Job Aid for Ethernet Routing Switch 5900 Series
Installation Job Aid for Ethernet Routing Switch 5900 Series Notices NN47211-301 Issue 05.01 November 2017 Notice paragraphs alert you about issues that require your attention. The following paragraphs
More informationM2-iLAN-2 Laser Scanner
M-iLAN- Laser Scanner Many fields of application due to modular construction Integrated controller LAN connection Low current consumption Due to the modular construction system nearly all Scanner models
More informationMounting holes. Transmitter optics. 8-pol. fem. conn. Binder Series 712 (connection to PLC) Connecting cable: cab-las4/pc or cab-4/usb or cab-4/eth
L-LAS Series L-LAS-TB-50-CL - Line laser
More informationRS-232 Industrial Media Converter
USER GUIDE The leader in rugged fiber optic technology. U-151 2018C-0327 Industrial Media Converter COMPACT, RUGGED & TEMPERATURE HARDENED Introduction This Industrial Serial Data media converter transports
More informationSC20MPC: 2 Mega Pixels Serial JPEG Camera User Manual. Introduction
2 Mega Pixels Serial JPEG Camera SC20MPC User Manual, Rev. F (August 2018) For latest user manual, please visit: Introduction The SC20MPC Camera is a highly integrated serial JPEG camera module which can
More informationButterfly Laser Diode Mount
LM14S2 Butterfly Laser Diode Mount Operating Manual LM14S2 Laser On TEC Driver LD Driver THORLABS, Inc. Ph: (973) 579-7227 435 Route 206N Fax: (973) 383-8406 Newton, NJ 07860 USA www.thorlabs.com 10614-D02
More informationStandard Strip Series
Standard Strip Series Standard Strip STS-12 LED Lighting Systems Installation Manual (Version 1.3) YESCO LLC, 5119 South Cameron Street, Las Vegas, NV 89118 Table of Contents Introduction 1 Mounting Diagrams
More informationOmron Adept Hornet 565 Robot Quick Setup Guide
Omron Adept Hornet 565 Robot Quick Setup Guide P/N: 14692-000, Rev A July, 2015 1.1 Introduction This Quick Setup Guide steps you through the installation and start-up of your Omron Adept Hornet 565 robot.
More informationZAVIO Outdoor IR Mini Dome. Quick Installation Guide
ZAVIO Outdoor IR Mini Dome Quick Installation Guide 0 Quick Installation Guide Please follow the installation steps below to set up your IP Camera. Check the package contents with the list below. See P.1
More informationNPort S8000 Series Quick Installation Guide
NPort S8000 Series Quick Installation Guide Edition 6.0, March 2016 Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: 1-714-528-6777 Fax: 1-714-528-6778
More informationAbsolute encoders - bus interfaces
Features Absolute encoder multiturn Optical sensing method Max. resolution: singleturn 18 bit, multiturn 16 bit LED status indicator PROFINET IO Maximum resistant against magnetic fields Optional EAL580
More informationWhy Lens Control? Canon EF Lens Control
Canon EF Lens Control Using a high-quality lens is a necessity in any vision application. With the LC-2 Canon EF lens controller, controlling the lens doesn't require a specific camera to be connected.
More informationM-545 Manual XY Microscope Stage For Olympus, Nikon, Leica & Zeiss Microscopes / PI Piezo Stages
M-545 Manual XY Microscope Stage For Olympus, Nikon, Leica & Zeiss Microscopes / PI Piezo Stages M-545 manual microscopy stages are designed to accommodate the P-545 PInano series of XY / XYZ Piezo stag
More informationMGate 5102-PBM-PN Series
MGate 5102-PBM-PN Series 1-port PROFIBUS-to-PROFINET gateways Features and Benefits Protocol conversion between PROFIBUS and PROFINET Supports PROFINET IO device Supports PROFIBUS DP V1 master Automatic
More informationMounting Card MC1XDZPC01
Description The MC1XDZPC01 mounting card is designed to host a DZCANTU series DigiFlex Performance TM digital servo drive. The drive plugs into the bottom side of the mounting card, providing a compact
More informationThe RAMM / MIM Platform for Microscopy A Modular Alternative for Innovative Research APPLIED SCIENTIFIC INSTRUMENTATION
The RAMM / MIM Platform for Microscopy A Modular Alternative for Innovative Research Why a Modular Microscope? RAMM BASIC The RAMM Frame Simple single-purpose microscope can be less expensive than a general
More informationContents. Part no.: MLC500T Safety light curtain transmitter
Part no.: 68000307 MLC500T30-750 Safety light curtain transmitter Figure can vary Contents Technical data Suitable receivers Dimensioned drawings Electrical connection Circuit diagrams Operation and display
More informationPAC BI-DP BIM and 8701-CA-BI Carrier
June 2013 PAC8000 8507-BI-DP BIM and 8701-CA-BI Carrier PROFIBUS DP Bus Interface Module and Carrier The 8507-BI-DP Bus Interface Module (BIM) provides the communications link between the PAC8000 series
More informationMGate 5105-MB-EIP Series
MGate 5105-MB-EIP Series 1-port Modbus RTU/ASCII/TCP-to-EtherNet/IP gateways Features and Benefits Protocol conversion between Modbus and EtherNet/IP Supports EtherNet/IP Scanner/Adapter Supports Modbus
More informationEtherSeries. EtherSeries CR-2. CR-2-Opto. User s Guide. Revised October 7, 2013 Firmware Version 1.X
EtherSeries EtherSeries CR-2 & CR-2-Opto User s Guide Revised October 7, 2013 Firmware Version 1.X TABLE OF CONTENTS SECTION 1 - DESCRIPTION... 2 SECTION 2 - SPECIFICATIONS... 4 SECTION 3 - INSTALLATION...
More informationS2C Link Accessory Kit Datasheet
S2C Link Accessory Kit Datasheet Part Number: NL-S2CK NimbeLink Corp Updated: May 2018 PN 30230 rev 3 NimbeLink Corp. All Rights Reserved 1 Table of Contents Introduction 3 Overview 3 Technical Specifications
More informationMore Precision. scancontrol // 2D/3D laser scanner (laser profile sensors)
More Precision scanontrol // 2D/3D laser scanner (laser profile sensors) scanontrol 27x gapontrol 27x1 Technical details and versions - z-axis up to 3mm - x-axis up to 148mm - Profile frequency up to 4,Hz
More informationThe SF02/F is an. easily configurable. laser rangefinder. module that provides. fast and accurate. distance. measurements, ideal
The SF02/F is an easily configurable laser rangefinder module that provides fast and accurate distance measurements, ideal for UAV s, radiocontrolled aircraft and robots. Features: A laser-based rangefinder
More informationSitePORTAL Lite TA-SPL32-R48
SitePORTAL Lite TA-SPL32-R48 Quick Connect Guide The TA-SPL32-R48 is a 19 inch, 2 RU rack mountable siteportal Lite (spl). It comes with 8 analog inputs, 8 temperature inputs (sensors sold separately),
More informationMirror positioning on your fingertip. Embedded controller means tiny size plus fast, easy integration. Low power for hand-held systems
SMALL, PRECISE, SMART IN MOTION DK-M3-RS-U-1M-20 Developer s Kit Single-Axis Mirror Positioning System Miniature piezo smart stage with built-in controller for simple, precise point-to-point positioning
More informationMicro Tech Lab. Operating Instruction LM DSLR Photomicroscope. Depending on the microscope configuration
Micro Tech Lab www.lmscope.com Operating Instruction LM DSLR Photomicroscope Depending on the microscope configuration and shipping country, the LM Photomicroscope is delivered with attached base plate
More informationEDR-G902/G903 Quick Installation Guide
EDR-G902/G903 Quick Installation Guide Moxa EtherDevice Router Edition 4.0, March 2016 Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: 1-714-528-6777
More informationSNAP-IT-PM Installation Guide
Chapter 1 SNAP-IT-PM Installation Guide Introduction The Opto 22 SNAP-IT panel-mount unit is a packaged solution for attaching electrical, electronic, and mechanical devices to an Ethernet network. Once
More informationNL100 Nitrogen Laser Stanford Research Systems
Operation and Service Manual NL100 Nitrogen Laser Stanford Research Systems Revision 1.12 January 24, 2014 Certification Stanford Research Systems certifies that this product is in compliance with IEC
More informationcontrol and versatility RTC 3, RTC 4
control and versatility RTC 3, RTC 4 SCANLAB s RTC PC interface boards provide synchronous, interferenceresistant control of scan systems and lasers in real time. A high-performance signal processor and
More informationSAFETY LIGHT CURTAINS
SAFETY LIGHT CURTAINS Installation accessories 560300 BT-SSD Swiveling support with shock absorber incl. 2 screws and 2 sliding blocks 560120 BT-S Mounting set consisting of 2 L-type brackets incl. 2 screws
More informationHAWK MV-4000 Smart Camera
HAWK MV-4000 Smart Camera Configuration Guide Hardware Required Item Description Part Number HAWK MV-4000 Smart Camera 8XX-XXX0-00X Lens, C-Mount 98-9000XX-0 3 IP67 Lens Cover for HAWK MV-4000, 50 mm or
More informationMGate 4101-MB-PBS Series
MGate 4101-MB-PBS Series 1-port Modbus RTU/ASCII-to-PROFIBUS slave gateways Features and Benefits Protocol conversion between Modbus and PROFIBUS Supports PROFIBUS DP V0 slave Supports Modbus RTU/ASCII
More informationArtisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
More informationGeometry Systems. TGIS-SL Tire Geometry Inspection System. Aftermarket Products & Services.
Aftermarket Products & Services To protect and maximize the return of your investment, Micro-Poise has an established global Aftermarket Products & Services network that is unsurpassed in the industry.
More informationDSLR Camera Cage Shoulder Rig Kit (FC-03)
FILMCITY DSLR Camera Cage Shoulder Rig Kit 1 DSLR Camera Cage Shoulder Rig Kit (FC-03) I N S T R U C T I O N M A N U A L All rights reserved. No part of this document may be reproduced, stored in a retrieval
More information42JS & 42JT VisiSight
JS & JT VisiSight mm Rectangular General Specifications Certifications culus Listed and CE Marked for all applicable directives 7-Encoders PHOTOSWITCH Photoelectric Shock g with ms pulse duration, meets
More informationDiffuse reflection light scanner with background suppression. Dimensioned drawing
Specifications and description HRTR 55 Ex Diffuse reflection light scanner with background suppression Dimensioned drawing en 01-2011/05 50113748 1 khz 5 400mm 200mm with black-white error < 10% 10-30
More informationKinetix 6000 Axis Module and Shunt Module
Installation Instructions Kinetix 6000 and Shunt Module Catalog Numbers 2094-AMxx, 2094-BMxx 2094-AMxx-S, 2094-BMxx-S 2094-BSP2 Topic Page About This Publication 1 Important User Information 2 Before You
More informationCI-100 and CI-170 Parts Catalog. Document
CI-100 and CI-170 Parts Catalog Industrial Dynamics Company, Ltd. Copyright 2011. All rights reserved. No part of this publication may be reproduced or used in any form or by any means (graphic, electronic,
More informationSCHNEIDER OPTICS INC. DISTAR PROJECTOR LENS W/ FOCUS MOUNT INSTRUCTION MANUAL
SCHNEIDER OPTICS INC. DISTAR PROJECTOR LENS W/ FOCUS MOUNT INSTRUCTION MANUAL Page INTRODUCTION Thank you for purchasing the Schneider Optics DiStar+HD projector lens. With the Schneider DiStar focus mount,
More informationSchick Technologies Schick Technologies, Inc th Ave., Long Island City, NY (718) Fax: (718)
Document #: B1051109 Revision #: Date: June 22, 2000 Page: 1 of 33 Schick Technologies Schick Technologies, Inc. 31-00 47 th Ave., Long Island City, NY 11101 (718) 937-5765 Fax: (718) 937-5962 CDRPan Installation
More information